Solar/Wind Energy Training Systems

Solar/Wind Energy Training Systems LabVolt Series Datasheet Festo Didactic en 120 V - 60 Hz 07/2018

Table of Contents General Description 2 Courseware 2 elearning Formats 3 Topic Coverage 3 Features & Benefits 3 List of Available Training Systems 3 Optional Equipment 4 Optional Manual(s) 4 Available Training Systems 4 Equipment Description 17 Optional Equipment Description 38 General Description The Solar/Wind Energy Training Systems form complete hybrid-energy training systems. These training systems demonstrate how wind turbines and solar cells are being used in the consumer and industrial markets to supplement the world s power needs. They constitute a modular program that covers the history, fundamentals, installation, operation, maintenance, and servicing of solar energy and wind energy systems. The program explores sunlight and wind as energy sources that can be used to help reduce dependence on non-renewable fuel sources. It helps students gain a complete perspective of the field by studying the economics, efficiency, and low-environmental impact of producing energy from non-polluting, renewable sources. All Solar/Wind Energy Training Systems are made from real-world components that are used in industry. These are the same components that students see in their homes, schools, and workplaces. All training systems are engineered for both ease of use and durability, and are manufactured to the highest quality standards. Courseware The courseware for each of the topics consists of a student manual and an instructor guide, as well as textbooks titled Photovoltaic Systems, by James P. Dunlop, and Wind Power, by Paul Gipe. Each student manual consists of a series of job sheets. The job sheets include a description of the objectives, a list of required equipment, a list of safety procedures, and a list of steps required to attain the objectives. To obtain detailed information about covered topics, students should refer to the textbooks or ask their instructor to guide their learning process. All student manuals, instructor guides, and textbooks are fully illustrated and color printed. All student manuals, instructor guides, and electrical drawing sets are available as.pdf files on a CD-ROM (P/N 86514-A0). A Facilitator PowerPoint Presentation and a Facilitator Guide containing instructional strategies and activities are also available as options. 2 Festo Didactic

elearning Formats The courseware is also available in the following three elearning formats for users who prefer a computerbased approach: Model 46549-E: eseries format, facilitated by the Mind-Sight elearning System. Model 46549-F: SCORM-based format, designed to be hosted by a third-party, SCORM 1.2 compliant management system. Model 46549-G: Stand-Alone format, available on CD-ROM. This format runs on a web browser and does not require any management system. An additional elearning course is available for use in conjunction with the Grid-Tied Training System Simulation Software, Model 46120-A. The software expands on the knowledge acquired about solar and wind energy, and enables students to simulate the connection of the system to the ac power network, forming a grid-tied system. The following learning platforms are available. 46549-1: Grid-Tied Training System - eseries 46549-2: Grid-Tied Training System - SCORM 46549-3: Grid-Tied Training System - Stand-Alone Finally, it is possible to combine the Grid-Tied Training System elearning course with the Grid-Tied Training System Simulation Software into a single bundle. The following variants are available: 46549-J: Grid-Tied Training System and Simulation Software - eseries 46549-K: Grid-Tied Training System and Simulation Software- SCORM 46549-L: Grid-Tied Training System and Simulation Software - Stand-Alone Please refer to our website at www.labvolt.com for more information about the Mind-Sight, SCORM, and Stand- Alone elearning formats. Topic Coverage Energy Fundamentals Trainer Familiarization and Safety Solar Module Wind Turbine Solar/Wind Systems Going Green Features & Benefits Includes everything required to operate as a stand-alone, hands-on training system Made with high-quality components currently used in residential, commercial, and industrial applications Easy and safe to use, durable, and manufactured to the highest quality standards Perforated work surfaces to allow custom configurations Comprehensive curriculum consisting of fully illustrated student manuals and instructor guides CSA/UL certified version available Identified wires allow students to save time Networked data acquisition available as an option List of Available Training Systems Festo Didactic 3

Qty Description Model 1 Solar/Wind Energy Training System 46120-00 1 Grid-Tied Training System Simulation Software (Add-On to Model 46120) 46120-A0 1 Outdoor Solar Module (Add-On to Model 46120) 46120-B0 1 Outdoor Wind Turbine Module A (Add-On to Model 46120) 46120-C0 1 Outdoor Wind Turbine Module B (Add-On to Model 46120) 46120-E0 1 Solar Energy Training System 46120-F0 1 Wind Energy Training System 46120-G0 1 Solar/Wind Energy Training System (UL/CSA Certified) 46120-H0 1 Networked Data Acquisition System (Add-On to Model 46120) 46120-J0 Optional Equipment Qty Description Model 1 Grid-Tied Systems for Simulator - eseries 46549-10 1 Solar/Wind Energy Training System - eseries 46549-E0 1 Grid-Tied Systems with Simulator - eseries 46549-J0 1 Solar/Wind Energy Training System Resource Package 86862-A0 Optional Manual(s) Model Qty Description 1 Solar/Wind Energy Training System (Manuals on CD-ROM) 86514-A0 Available Training Systems Solar/Wind Energy Training System 46120-00 The Solar/Wind Energy Training System, Model 46120, is the main variant of the program. It forms a complete hybrid-energy training system that teaches students how solar panels and wind turbines are used in today's consumer and industrial markets. During the course of their training, students learn how to install the system components, operate the system, and measure the different parameters important to the production of energy from solar power and wind power. The Solar/Wind Energy Training System includes everything required to function as a stand-alone, hands-on learning workstation: solar and wind 4 Festo Didactic

energy power-generating equipment, training modules with fault-insertion capabilities, student manuals, and instructor guides. List of Equipment Qty Description Model 1 Solar/Wind Energy Mobile Workstation 46801-J0 1 Battery Bank 65917-00 1 Battery Bank Junction Box 66050-00 4 Electrical AC Outlet 66051-10 3 Ammeter 66052-00 1 DC Power Distribution Panel 66053-00 2 Horizontal-Mount Disconnect Switch 66054-H0 2 Vertical-Mount Disconnect Switch 66054-V0 1 Diversion Load Controller 66056-00 1 Dump Load 66057-00 3 DC Circuit Breaker 66058-00 1 kwh Meters with AC Circuit Breaker Box 66059-00 4 AC/DC Wall Switch 66060-00 1 Lockout/Tagout Module 66061-00 1 Power Bus Bar 66062-00 1 Power Inverter with Remote Control 66064-00 1 Solar Charge Controller 66065-00 1 Stop Switch 66066-00 3 DC Lamp Socket 66067-00 1 Photovoltaic (PV) Module Assembly 66070-10 1 Wind Turbine Generator with DC Motor (for Wind Simulator) 66075-00 1 Solar Array Junction Box 66150-10 1 Sun Simulator Assembly 66151-00 1 DC Motor Controller (for Wind Simulator) 66153-00 1 Accessories Package 66154-00 1 Connection Cables Kit 87339-00 1 66063-00 1 87372-40 1 Multimeter 6394-A0 Festo Didactic 5

List of Manuals Manual Description Photovoltaic Systems Textbook (author, James P. Dunlop) (Student Manual) 66166-00 Wind Turbine Technology, 1st Edition (Reference Book) 66177-10 Energy Fundamentals (Job Sheets - Student) 86514-20 Energy Fundamentals (Job Sheets - Instructor) 86514-30 Trainer Familiarization and Safety (Job Sheets - Student) 86515-20 Trainer Familiarization and Safety (Job Sheets - Instructor) 86515-30 Solar Module (Job Sheets - Student) 86516-20 Solar Module (Job Sheets - Instructor) 86516-30 Wind Turbine (Job Sheets - Student) 86517-20 Wind Turbine (Job Sheets - Instructor) 86517-30 Solar/Wind Systems (Job Sheets - Student) 86518-20 Solar/Wind Systems (Job Sheets - Instructor) 86518-30 Going Green (Job Sheets - Student) 86519-20 Going Green (Job Sheets - Instructor) 86519-30 Table of Contents of the Manual(s) Energy Fundamentals (Job Sheets - Student) (86514-20) 1 Sources of Energy 2 Power and Work 3 Measurements and Units Trainer Familiarization and Safety (Job Sheets - Student) (86515-20) 1 Trainer Components 2 Safety Practices 3 Lockout/Tagout Procedure 4 Proper Grounding 5 Equipment Protection Solar Module (Job Sheets - Student) (86516-20) 1 Siting 2 Photovoltaic Module 3 Charge Controller 4 Loading 5 Battery Bank Wind Turbine (Job Sheets - Student) (86517-20) 1 Siting 2 Turbine Generator 3 Stop Switch 4 Loading 5 Battery Bank Solar/Wind Systems (Job Sheets - Student) (86518-20) 1 Diversion Load and Controller 2 DC to AC Inverter 6 Festo Didactic

3 Power Consumption 4 Power Efficiency 5 Power Transmission and Distribution 6 On/Off Grid Operation 7 Hybrid Generator 8 Troubleshooting Going Green (Job Sheets - Student) (86519-20) 1 Solar Energy History 2 Wind Energy History 3 Solar/Wind Energy Careers System Intended Location On the floor (stands on casters) 2356 x 2235 x 851 mm (86 x 88 x 31.5 in) Outdoor Solar Module (Add-On to Model 46120) 46120-B0 The Outdoor Solar Module is an add-on to the Solar/Wind Energy Training System, Model 46120. It consists of a photovoltaic panel being able to produce up to 85 W of electrical power at a nominal voltage of 12 V. System Electrical Characteristics Nominal Voltage Maximum Power Maximum Power Voltage Maximum Power Current Short Circuit Current Open Circuit Voltage 12 V 85 W 17.9 V 4.84 A 5.17 A 21.9 V Efficiency 12.53 % 67.0 x 101.5 x 3.5 cm (26.3 x 40.0 x 1.38 in) 14.5 kg (32 lb) Festo Didactic 7

Outdoor Wind Turbine Module A (Add-On to Model 46120) 46120-C0 The Outdoor Wind Turbine Module A is an add-on to the Solar/Wind Energy Training System, Model 46120-00. It consists of a Wind Turbine Generator, Model 87359, and a 8.84 m (29 ft) EZ Tower Kit, Model 87387. The tower kit comprises all the hardware required to erect the tower, such as pipes, anchors, and cables. List of Equipment Qty Description Model 1 Wind Turbine Owner s Manual 20714-00 1 Wind Turbine Generator 87359-00 1 EZ Tower Kit 87387-00 Outdoor Wind Turbine Module B (Add-On to Model 46120) 46120-E0 The Outdoor Wind Turbine Module B is an add-on to the Solar/Wind Energy Training System, Model 46120-00. It consists of a Wind Turbine Generator, Model 87359, and a 8.23 m (27 ft) Air- Guyed Tower Kit, Model 87446. The tower kit comprises all the hardware necessary to erect the tower, except anchors, pipes, and concrete. 8 Festo Didactic

List of Equipment Qty Description Model 1 Wind Turbine Owner s Manual 20714-00 1 Wind Turbine Generator 87359-00 1 Air-Guyed Tower Kit 87446-00 Solar Energy Training System 46120-F0 The Solar Energy Training System is a variant of the Solar/Wind Energy Training System, Model 46120, that comprises only the equipment required for teaching the principles of electrical energy production from solar power (i.e., it does not included the equipment related to electrical energy production from wind power). List of Equipment Qty Description Model 1 Solar/Wind Energy Mobile Workstation 46801-J0 1 Battery Bank 65917-00 1 Battery Bank Junction Box 66050-00 4 Electrical AC Outlet 66051-10 3 Ammeter 66052-00 1 DC Power Distribution Panel 66053-00 2 Horizontal-Mount Disconnect Switch 66054-H0 2 Vertical-Mount Disconnect Switch 66054-V0 1 Diversion Load Controller 66056-00 1 Dump Load 66057-00 3 DC Circuit Breaker 66058-00 1 kwh Meters with AC Circuit Breaker Box 66059-00 4 AC/DC Wall Switch 66060-00 1 Lockout/Tagout Module 66061-00 1 Power Bus Bar 66062-00 1 Power Inverter with Remote Control 66064-00 1 Solar Charge Controller 66065-00 Festo Didactic 9

Qty Description Model 3 DC Lamp Socket 66067-00 1 Photovoltaic (PV) Module Assembly 66070-10 1 Solar Array Junction Box 66150-10 1 Sun Simulator Assembly 66151-00 1 Accessories Package 66154-00 1 Connection Cables Kit 87339-00 1 66063-00 1 87372-40 1 Multimeter 6394-A0 List of Manuals Manual Description Photovoltaic Systems Textbook (author, James P. Dunlop) (Student Manual) 66166-00 Energy Fundamentals (Job Sheets - Student) 86514-20 Energy Fundamentals (Job Sheets - Instructor) 86514-30 Trainer Familiarization and Safety (Job Sheets - Student) 86515-20 Trainer Familiarization and Safety (Job Sheets - Instructor) 86515-30 Solar Module (Job Sheets - Student) 86516-20 Solar Module (Job Sheets - Instructor) 86516-30 Solar/Wind Systems (Job Sheets - Student) 86518-20 Solar/Wind Systems (Job Sheets - Instructor) 86518-30 Going Green (Job Sheets - Student) 86519-20 Going Green (Job Sheets - Instructor) 86519-30 Table of Contents of the Manual(s) Energy Fundamentals (Job Sheets - Student) (86514-20) 1 Sources of Energy 2 Power and Work 3 Measurements and Units Trainer Familiarization and Safety (Job Sheets - Student) (86515-20) 1 Trainer Components 2 Safety Practices 3 Lockout/Tagout Procedure 4 Proper Grounding 5 Equipment Protection Solar Module (Job Sheets - Student) (86516-20) 1 Siting 2 Photovoltaic Module 3 Charge Controller 4 Loading 5 Battery Bank Solar/Wind Systems (Job Sheets - Student) (86518-20) 10 Festo Didactic

1 Diversion Load and Controller 2 DC to AC Inverter 3 Power Consumption 4 Power Efficiency 5 Power Transmission and Distribution 6 On/Off Grid Operation 7 Hybrid Generator 8 Troubleshooting Going Green (Job Sheets - Student) (86519-20) 1 Solar Energy History 2 Wind Energy History 3 Solar/Wind Energy Careers System Required Floor Space (H x W x D) Wind Energy Training System 46120-G0 On Casters, 2356 x 2235 x 851 mm (86 x 88 x 31.5 in) The Wind Energy Training System is a variant of the Solar/Wind Energy Training System, Model 46120, that comprises only the equipment required for teaching the principles of electrical energy production from wind power (i.e., it does not included the equipment related to electrical energy production from solar power). List of Equipment Qty Description Model 1 Solar/Wind Energy Mobile Workstation 46801-J0 1 Battery Bank 65917-00 1 Battery Bank Junction Box 66050-00 4 Electrical AC Outlet 66051-10 3 Ammeter 66052-00 1 DC Power Distribution Panel 66053-00 Festo Didactic 11

Qty Description Model 2 Horizontal-Mount Disconnect Switch 66054-H0 2 Vertical-Mount Disconnect Switch 66054-V0 1 Diversion Load Controller 66056-00 1 Dump Load 66057-00 3 DC Circuit Breaker 66058-00 1 kwh Meters with AC Circuit Breaker Box 66059-00 4 AC/DC Wall Switch 66060-00 1 Lockout/Tagout Module 66061-00 1 Power Bus Bar 66062-00 1 Power Inverter with Remote Control 66064-00 1 Stop Switch 66066-00 3 DC Lamp Socket 66067-00 1 Wind Turbine Generator with DC Motor (for Wind Simulator) 66075-00 1 DC Motor Controller (for Wind Simulator) 66153-00 1 Accessories Package 66154-00 1 Connection Cables Kit 87339-00 1 66063-00 1 87372-40 1 Multimeter 6394-A0 List of Manuals Manual Description Wind Turbine Technology, 1st Edition (Reference Book) 66177-10 Energy Fundamentals (Job Sheets - Student) 86514-20 Energy Fundamentals (Job Sheets - Instructor) 86514-30 Trainer Familiarization and Safety (Job Sheets - Student) 86515-20 Trainer Familiarization and Safety (Job Sheets - Instructor) 86515-30 Wind Turbine (Job Sheets - Student) 86517-20 Wind Turbine (Job Sheets - Instructor) 86517-30 Solar/Wind Systems (Job Sheets - Student) 86518-20 Solar/Wind Systems (Job Sheets - Instructor) 86518-30 Going Green (Job Sheets - Student) 86519-20 Going Green (Job Sheets - Instructor) 86519-30 Table of Contents of the Manual(s) Energy Fundamentals (Job Sheets - Student) (86514-20) 1 Sources of Energy 2 Power and Work 3 Measurements and Units Trainer Familiarization and Safety (Job Sheets - Student) (86515-20) 1 Trainer Components 2 Safety Practices 3 Lockout/Tagout Procedure 12 Festo Didactic

4 Proper Grounding 5 Equipment Protection Wind Turbine (Job Sheets - Student) (86517-20) 1 Siting 2 Turbine Generator 3 Stop Switch 4 Loading 5 Battery Bank Solar/Wind Systems (Job Sheets - Student) (86518-20) 1 Diversion Load and Controller 2 DC to AC Inverter 3 Power Consumption 4 Power Efficiency 5 Power Transmission and Distribution 6 On/Off Grid Operation 7 Hybrid Generator 8 Troubleshooting Going Green (Job Sheets - Student) (86519-20) 1 Solar Energy History 2 Wind Energy History 3 Solar/Wind Energy Careers System Required Floor Space (H x W x D) On Casters, 2356 x 2235 x 851 mm (86 x 88 x 31.5 in) Festo Didactic 13

Solar/Wind Energy Training System (UL/CSA Certified) 46120-H0 List of Equipment The Solar/Wind Energy Training System (UL/CSA Certified) is a variant of the Solar/Wind Energy Training System, Model 46120, that is fully UL/ CSA certified. It demonstrates how wind turbines and solar panels are used in the consumer and industrial markets to supplement the world s power needs. The Solar/Wind Energy Training System (UL/CSA Certified) includes everything required to function as a stand-alone, hands-on learning workstation: solar and wind energy power-generating equipment, training modules with fault-insertion capabilities, student manuals, and instructor guides. Qty Description Model 1 Solar/Wind Energy Mobile Workstation 46801-J0 1 Battery Bank 65917-00 1 Battery Bank Junction Box 66050-00 4 Electrical AC Outlet 66051-10 3 Ammeter 66052-00 1 DC Power Distribution Panel 66053-00 2 Horizontal-Mount Disconnect Switch 66054-H0 2 Vertical-Mount Disconnect Switch 66054-V0 1 Diversion Load Controller 66056-00 1 Dump Load 66057-00 3 DC Circuit Breaker 66058-00 1 kwh Meters with AC Circuit Breaker Box (UL/CSA Certified) 66059-A0 4 AC/DC Wall Switch 66060-00 1 Lockout/Tagout Module 66061-00 1 Power Bus Bar 66062-00 1 Power Inverter with Remote Control 66064-00 1 Solar Charge Controller 66065-00 1 Stop Switch 66066-00 3 DC Lamp Socket 66067-00 1 Photovoltaic (PV) Module Assembly 66070-10 1 Wind Turbine Generator with DC Motor (for Wind Simulator) 66075-00 1 Solar Array Junction Box 66150-10 1 Sun Simulator Assembly 66151-00 14 Festo Didactic

Qty Description Model 1 DC Motor Controller (for Wind Simulator) 66153-00 1 Accessories Package 66154-00 1 Connection Cables Kit 87339-00 1 66063-00 1 87372-40 1 Multimeter 6394-A0 List of Manuals Manual Description Solar/Wind Energy Training System (User Guide) 52029-E0 Photovoltaic Systems Textbook (author, James P. Dunlop) (Student Manual) 66166-00 Wind Power Textbook, Paul Gipe (Reference Book) 66177-00 Energy Fundamentals (Job Sheets - Student) 86514-20 Energy Fundamentals (Job Sheets - Instructor) 86514-30 Trainer Familiarization and Safety (Job Sheets - Student) 86515-20 Trainer Familiarization and Safety (Job Sheets - Instructor) 86515-30 Solar Module (Job Sheets - Student) 86516-20 Solar Module (Job Sheets - Instructor) 86516-30 Wind Turbine (Job Sheets - Student) 86517-20 Wind Turbine (Job Sheets - Instructor) 86517-30 Solar/Wind Systems (Job Sheets - Student) 86518-20 Solar/Wind Systems (Job Sheets - Instructor) 86518-30 Going Green (Job Sheets - Student) 86519-20 Going Green (Job Sheets - Instructor) 86519-30 Table of Contents of the Manual(s) Energy Fundamentals (Job Sheets - Student) (86514-20) 1 Sources of Energy 2 Power and Work 3 Measurements and Units Trainer Familiarization and Safety (Job Sheets - Student) (86515-20) 1 Trainer Components 2 Safety Practices 3 Lockout/Tagout Procedure 4 Proper Grounding 5 Equipment Protection Solar Module (Job Sheets - Student) (86516-20) 1 Siting 2 Photovoltaic Module 3 Charge Controller 4 Loading 5 Battery Bank Festo Didactic 15

Wind Turbine (Job Sheets - Student) (86517-20) 1 Siting 2 Turbine Generator 3 Stop Switch 4 Loading 5 Battery Bank Solar/Wind Systems (Job Sheets - Student) (86518-20) 1 Diversion Load and Controller 2 DC to AC Inverter 3 Power Consumption 4 Power Efficiency 5 Power Transmission and Distribution 6 On/Off Grid Operation 7 Hybrid Generator 8 Troubleshooting Going Green (Job Sheets - Student) (86519-20) 1 Solar Energy History 2 Wind Energy History 3 Solar/Wind Energy Careers System Power Requirements Current Service Installation Intended Location 15 A Standard single-phase ac outlet On the floor (stands on casters) 2356 x 2235 x 851 mm (86 x 88 x 31.5 in) TBE Networked Data Acquisition System (Add-On to Model 46120) 46120-J0 (WAN) or a local area network (LAN). The Networked Data Acquisition System is an add-on to the Solar/Wind Energy Training System, Model 46120, that comprises the Networked Data Acquisition Interface, Model 46540. This interface allows remote monitoring of the power and energy levels measured in the training system. The measured data is transmitted using a wide area network The Networked Data Acquisition System allows users to view real-time electrical, environmental, and ecological data via an internet or an intranet connection from most common web browsers. Up to 30 users can access the data simultaneously. 16 Festo Didactic

Additional sensors are required to make environmental measurements. A pyranometer is provided to measure shortwave solar radiation, or irradiance. An anemometer is provided to measure average wind speeds. List of Equipment Qty Description Model 1 Networked Data Acquisition Interface (NDAI) 46540-00 1 Interconnection Cables for 46120-J 46541-00 1 Accessories Kit 46542-00 Manual Manual Description Networked Data Acquisition (User Guide) 87655-E0 Optional Equipment Model Qty Description 1 Temperature Sensor 46543-00 Equipment Description Multimeter 6394-A0 The Multimeter is used for ac/dc voltage, dc current, and resistance measurements. Type Functions Accuracy Display Features Digital, handheld (portable) AC/DC voltage, dc current, resistance, continuity diode test, and battery test ±2.0% or better 3½ digit, liquid-crystal Safety-recessed test lead connections, low-battery indication, audible continuity, overload protection, mounted on a base that clamps to the work surface using quick-lock fixations 170 x 70 x 38 mm (6.7 x 2.75 x 1.5 in) 0.36 kg (0.8 lb) Festo Didactic 17

Wind Turbine Owner s Manual 20714-00 The Wind Turbine Owner's Manual is included with the Wind Turbine Generator, Model 87359. it covers the following topics concerning the wind turbine: Important Safety Instructions and Technical Turbine Assembly Siting Towers Wiring Options Installation Air Wind Turbine Operation Maintenance Troubleshooting Exploded Views and Parts List Warranty Grid-Tied Training System Simulation Software (Add-On to Model 46120) 46120-A0 The Grid-Tied Training System Simulation Software is a comprehensive add-on to the Solar/ Wind Energy Training System, Model 46120. The software expands on the knowledge acquired about solar and wind energy, and enables students to simulate the connection of the system to the ac power network, forming a grid-tied system. Grid-tied systems generate electricity and send this energy back to the ac power network. The energy produced is subtracted from the energy consumed by the system (e.g., home energy consumption, business energy needs), thereby decreasing the amount of energy drawn from the power grid. The Grid-Tied Training System Simulation Software simulates the installation and operation of a utilityinteractive photovoltaic (PV) solar energy system in a residential home. The software comprises an Electrical Wiring Simulator and a Home Energy Simulator, and includes student manuals and instructor guides. Topic coverage includes: Commercial string inverters Installing a grid-tied photovoltaic solar power system Wiring and configuring alternative energy systems Smart-grid technology Remote data acquisition Power management techniques The NEC code as it applies to alternative energy installation in the United-States 18 Festo Didactic

Installation requirements for solar and wind power systems in the continental United-States and its territories List of Manuals Manual Description Grid-Tied Systems (Job Sheets - Student) 86903-20 Grid-Tied Systems (Job Sheets - Instructor) 86903-30 Table of Contents of the Manual(s) Grid-Tied Systems (Job Sheets - Student) (86903-20) 1 Grid-Connected Equipment 2 Utility-Interactive Software 3 The NEC Networked Data Acquisition Interface (NDAI) 46540-00 The Networked Data Acquisition Interface (NDAI) is a remote monitoring interface. Ten analog inputs on the module faceplate allow monitoring of different parameters of the Solar/Wind Energy Training System, Model 46120. These analog inputs include: Six channels for monitoring dc power levels Two channels for monitoring ac power levels Two channels for monitoring environmental conditions In addition to the 10 possible parameters monitored using the analog inputs on the module faceplate, more than 22 additional parameters can be calculated and displayed on screen. These measured and calculated parameters include: Measured parameters AC load voltage AC load current DC load current Wind turbine current Solar module voltage Solar module current Battery bank / Wind turbine / DC load voltage Battery bank current (negative = charging) Solar irradiance Wind speed Festo Didactic 19

Calculated parameters Solar module power Wind turbine power Battery bank power DC load power Inverter input / Diverter output voltage Inverter input / Diverter output current Inverter input / Diverter output power Inverter output / AC load power Power inverter efficiency Total power generated Total power consumed Total energy generated Total energy consumed Total energy generated (long term) Total energy consumed (long term) Energy cost savings CO² emissions avoided Energy cost savings (long term) CO² emissions avoided (long term) CO² emissions offset (for driving) CO² emissions sequestered (by planting) Server access time Power Requirements Voltage Current Sample Rate Frequency Analog Inputs Quantity 10 AC Load/Inverter Voltage Setting 10-30 V dc (typically 24 V dc) 0.22 A at 24 V dc 3.33 Hz ±20 ma Scaling ma x 7.5 Voltage AC Load/Inverter Current Setting 0-150 Vac ±0.25% of FS ±20 ma Scaling ma x 0.25 Current DC Load Current Setting 0-5 A ac ±0.25% of FS ±150 mv Scaling mv / 2.5 Current 0-60 A dc ±0.5% of FS (hardware limit: 15 A) Wind Turbine Current Setting ±150 mv Scaling mv / 2.5 Current 0-60 A dc ±0.5% of FS (hardware limit: 20 A) Solar Module Voltage Setting ±5V Scaling V x 5 Voltage 0-25 V dc ±0.5% of FS 20 Festo Didactic

Solar Module Current Setting ±150 mv Scaling mv / 2.5 Current 0-60 A dc ±0.5% of FS (hardware limit: 20 A) Battery/Turbine/DC Load Voltage Setting ±5 V Scaling V x 5 Voltage 0-25 V dc ±0.5% of FS (hardware limit: 40 A) Battery Bank Current Setting ±150 mv Scaling mv x 1 Current 0-150 A dc ±0.5% of FS Solar Irradiance Setting ±500 mv Scaling mv x 5 Irradiance 0-1750 W/m² (300-1175 nm) ±5% of FS (5 W/m² per mv) Wind Speed Setting ±5 V Scaling (V + 0.09) x 33.8 Speed 8-172 mph ±3% of FS (displays > 4 mph) Temperature (Optional) Setting 4-20 ma Scaling ((ma - 4) x 19.1875) - 99 Temperature -60 C to 208 C ±0.9% of FS Dimensions (L x W x H) 86.4 x 43.2 x 40.6 cm (34 x 17 x 16 in) 4.04 kg (8.9 lb) Interconnection Cables for 46120-J 46541-00 The Interconnection Cables, Model 46541, are required for wiring the Networked Data Acquisition System, Model 46120-J. Accessories Kit 46542-00 The Accessories Kit comprises the following accessories for use with the Networked Data Acquisition System, Model 46120-J: An Apogée SP100 silicon-cell photodiode pyranometer An AL-100 leveling plate A Nor'Easter anemometer Festo Didactic 21

Solar/Wind Energy Mobile Workstation 46801-J0 The Solar/Wind Energy Mobile Workstation consists of a sturdy, welded-steel frame painted using powder-coated paint for a durable surface. The unit is mounted on four swivel casters with a locking mechanism that allow easy motion and stable operation. The workstation includes two perforated work surfaces for module installation and operation. TBE TBE Battery Bank 65917-00 The Battery Bank consists of a 12 V dc, 110 A h, deep-cycle, sealed, lead-acid, absorptive glass mat (AGM) storage battery designed to store electrical energy produced from renewable energy sources such as solar power and wind power. Battery Type Rating Sealed, lead-acid, absorptive glass mat (AGM) storage battery 12 V dc, 110 A h 17.2 x 26.7 x 33.0 cm (6.75 x 10.5 x 13 in) 32.25 kg (71.10 lb) 22 Festo Didactic

Battery Bank Junction Box 66050-00 The Battery Bank Junction Box contains a 30 A dc circuit breaker and a 0.5 A dc ground-fault protection device (GFPD). Junction Box Contents Battery Bank Circuit Breaker Ground-Fault Protection Device Electrical AC Outlet 66051-10 One resettable battery bank circuit breaker and one ground-fault protection device (GFPD) 30 A dc, resettable 0.5 A dc 17.15 x 15.88 x 12.1 cm (6.75 x 6.25 x 4.75 in) 2.36 kg (5.2 lb) The Electrical AC Outlet consists of a 120 V ac electrical outlet that is used to provide a power source for devices requiring a standard, NEMA-type electrical outlet. Festo Didactic 23

Electrical Outlet Type Ratings NEMA, two-pole, three-wire 120 V, 15 A,60 Hz 12.1 x 12.1 x 8.3 cm (4.75 x 4.75 x 3.25 in) 0.41 kg (0.9 lb) Ammeter 66052-00 The Ammeter consists of a 30 A dc ammeter used for a multitude of purposes in conjunction with the Solar/Wind Energy Training Systems, such as measuring current flowing through the solar module, the wind turbine, or the dump load. Contacts Type Rating Analog 0-30 A dc 12.1 x 12.1 x 10.2 cm (4.75 x 4.75 x 4.0 in) 0.6 kg (1.3 lb) DC Power Distribution Panel 66053-00 The DC Power Distribution Panel consists of a fuse-protected distribution panels with four power outputs that can be used to provide power to low-voltage dc devices. Power Outputs Ratings 12 V dc, 5 A dc 24 Festo Didactic

Quantity 4 pairs of +/- power output terminals Power Input Ratings 12 V dc, 5 A dc Fault Switches 4 Fuse Protection Rating 250 V dc, 5 A dc 12.1 x 12.1 x 8.3 cm (4.75 x 4.75 x 3.25 in) 0.41 kg (0.9 lb) Horizontal-Mount Disconnect Switch 66054-H0 The Horizontal-Mount Disconnect Switch consists of a 40 A SPST horizontally mounted disconnect switch used for a multitude of purposes in conjunction with the Solar/Wind Energy Training Systems, such as opening the connection between the battery bank and the solar module, the wind turbine, the dump load, and the power inverter. Contacts Type Rating 1 NO contact set with key 48 V dc, 40 A dc 7.62 x 12.7 x 12.1 cm (3.0 x 5.0 x 4.75 in) 0.043 kg (0.95 lb) Festo Didactic 25

Vertical-Mount Disconnect Switch 66054-V0 The Vertical-Mount Disconnect Switch consists of a 40 A SPST vertically mounted disconnect switch used for a multitude of purposes in conjunction with the Solar/Wind Energy Training Systems, such as opening the connection between the battery bank and the solar module, the wind turbine, the dump load, and the power inverter. Contacts Type Rating 1 NO contact set with key 48 V dc, 40 A dc 12.7 x 7.62 x 12.1 cm (5.0 x 3.0 x 4.75 in) 0.043 kg (0.95 lb) Diversion Load Controller 66056-00 The Diversion Load Controller consists of a 35 A PWM controller operating in shunt mode used for controlling the use of the electrical energy available in the battery bank of the Solar/Wind Energy Training Systems. Controller Type Rating PWM controller operating in shunt mode 35 A dc 22.7 x 33.0 x 7.0 cm (9.0 x 13.0 x 2.75 in) 2.1 kg (4.6 lb) 26 Festo Didactic

Dump Load 66057-00 The Dump Load consists of a resistor used to convert into heat the excess electrical energy produced by the Solar/Wind Energy Training Systems once the battery bank is fully charged. Dump Resistor 0.5 Ω, 100 W 22.7 x 33.0 x 9.53 cm (9.0 x 13.0 x 3.25 in) 1.95 kg (4.3 lb) DC Circuit Breaker 66058-00 The DC Circuit Breaker consists of a resettable 50 A dc circuit breaker used to protect low-voltage devices. Circuit Breaker Type Rating Resettable NC bi-metal circuit breaker 12 V dc, 50 A dc 12.1 x 12.1 x 7.6 cm (4.75 x 4.75 x 3.0 in) 0.41 kg (0.9 lb) Festo Didactic 27

kwh Meters with AC Circuit Breaker Box 66059-00 The kwh Meters with AC Circuit Breaker Box consists of two kwh meters and a circuit-breaker box. One of the kwh meters is used to measure the power transmission to/from the utility grid, while the other is used to measure the power transmission to/ from the electrical power source (e.g., solar panels, wind turbine). The circuit-breaker box contains three resettable ac circuit breakers. kwh Meters Type Analog Rating 120 V ac Circuit-Breaker Box Two-pole circuit breaker 120 V ac, 30 A ac, resettable, quantity: 1 One-pole circuit breakers 120 V ac, 15 A ac, resettable, quantity: 2 - kwh Meters Dimensions (Dia. x D) 20.3 x 16.5 cm (8.0 x 6.5 in) 2.45 kg (5.4 lb) - Circuit-Breaker Box 33 x 17.8 x 8.9 cm (13.0 x 7.0 x 3.5 in) 10.0 lb (4.55 kg) 28 Festo Didactic

kwh Meters with AC Circuit Breaker Box (UL/CSA Certified) 66059-A0 The kwh Meters with AC Circuit Breaker Box (UL/CSA Certified) consists of two kwh meters and a circuit-breaker box. One of the kwh meters is used to measure the power transmission to/from the utility grid, while the other is used to measure the power transmission to/from the electrical power source (e.g., solar panels, wind turbine). The circuitbreaker box contains three resettable ac circuit breakers. All components of the module are UL/CSA certified. Manual Manual Description Solar/Wind Energy Training System (User Guide) 52029-E0 kwh Meters Type Rating Circuit-Breaker Box Analog 120 V ac Two-Pole Circuit Breaker 120 V ac, 30 A ac, resettable, quantity: 1 One-Pole Circuit Breakers 120 V ac, 15 A ac, resettable, quantity: 2 - kwh Meters Dimensions (Dia. x D) - Circuit-Breaker Box 20.3 x 16.5 cm (8.0 x 6.5 in) 2.45 kg (5.4 lb) 17.78 x 13.02 x 8.89 cm (13.0 x 7.0 x 3.5 in) 4.55 kg (10.0 lb) Festo Didactic 29

AC/DC Wall Switch 66060-00 The AC/DC Wall Switch consists of an ac/dc toggle switch for turning power on or off to any electrical device connected to the module terminals. A switch on the rear of the module allows selection of the type of current (ac or dc) supplied by the wall switch. The ac and dc circuits of the wall switch are electrically isolated one from the other. Toggle Switch Type SPST Rating (DC) 120 V, 5 A Rating (AC) 120 V, 11 A Fault Switches 1 12.1 x 12.1 x 8.3 cm (4.75 x 4.75 x 3.25 in) 0.41 kg (0.9 lb) Lockout/Tagout Module 66061-00 The Lockout/Tagout Module consists of an SPST switch used to teach students the principles of safety procedures when working with electrical equipment. Toggle Switch Type Rating SPST with hasp 120 V ac, 15 A ac 12.1 x 14.0 x 10.2 cm (4.75 x 5.5 x 4.0 in) 1.18 kg (2.6 lb) 30 Festo Didactic

Power Bus Bar 66062-00 The Power Bus Bar consists of a 12 V dc power bus bar fitted with positive and negative rails used for distributing electrical power to/from the battery bank. Terminal screws on the positive and negative rails allow connection to the bus bar. Power Bus Bar Terminals Rating Positive and negative terminal screws 48 V dc, 150 A dc 12.1 x 12.1 x 6.4 cm (4.75 x 4.75 x 2.5 in) 0.45 kg (1 lb) Power Inverter with Remote Control 66064-00 The Power Inverter with Remote Control consists of a 1 kw dc-to-ac converter that converts 12 V dc power to 120 V ac power. Inverter Type Input Rating Output Rating Power Rating Pure sinusoidal power inverter (with remote) 12 V dc 120 V ac 1 kw 27.3 x 37.5 x 10.8 cm (10.75 x 14.75 x 4.25 in) 5.65 kg (12.45 lb) Festo Didactic 31

Solar Charge Controller 66065-00 The Solar Charge Controller consists of a 30A PWM controller used for controlling the power produced by the solar panels in order to properly charge the battery bank. Charge Controller Type Rating Stop Switch 66066-00 PWM series battery charging (not shunt), with temperature sensor 12 V dc, 30 A dc 22.2 x 22.2 x 7.0 cm (8.75 x 8.75 x 2.75 in) 1.18 kg (2.6 lb) The Stop Switch consists of a 50 A SPDT break-before-make switch used for stopping the mechanical rotation of the wind turbine generator shaft during servicing or maintenance. The Stop Switch first disconnects the battery bank, then short-circuits the generator output. Stop Switch Type Rating SPDT center-off toggle switch 12 V dc, 50 A dc 12.1 x 12.1 x 10.8 cm (4.75 x 4.75 x 4.25 in) 0.41 kg (0.9 lb) 32 Festo Didactic

DC Lamp Socket 66067-00 The DC Lamp Socket consists of a socket used for connecting a standard dc lamp. Positive and negative terminals on the module faceplate are used to power the lamp. DC Lamp Socket Rating 12 V dc, 5 A dc 12.1 x 12.1 x 8.3 cm (4.75 x 4.75 x 3.25 in) 0.41 kg (0.9 lb) Photovoltaic (PV) Module Assembly 66070-10 The Photovoltaic (PV) Module Assembly consists of a photovoltaic panel that operates at a nominal voltage of 12 V dc and can produce up to 85 W of electrical power from solar energy. Electrical Characteristics Nominal Voltage 12 V Maximum Power 85 W Maximum Power Voltage 17.9 V Maximum Power Current 4.84 A Short Circuit Current 5.17 A Open Circuit Voltage 21.9 V Efficiency 12.53% 67.0 x 101.5 x 4.5 cm (26.3 x 40.0 x 1.75 in) Festo Didactic 33

14.51 kg (32 lb) Wind Turbine Generator with DC Motor (for Wind Simulator) 66075-00 The Wind Turbine Generator with DC Motor comprises a 90 V permanentmagnet dc motor operating at 1800 rpm. This motor is mechanically linked to the wind turbine shaft in order to simulate wind energy. A version comprising a 180 V dc motor is also available. Wind Turbine Generator Type Output Rating Solar Array Junction Box 66150-10 Three-phase synchronous generator with rectified dc output 12 V dc, 7 A dc 38.1 x 68.58 x 22.86 cm (15.0 x 27.0 x 9.0 in) 7.4 kg (17 lb) The Solar Array Junction Box contains a 150 V dc - 8 A circuit breaker that also functions as a dc disconnect switch. DC Disconnect Maximum System Voltage Maximum System Current Rated Maximum Power-Point Voltage Rated Maximum Power-Point Current Rated Charge Controller Output Current Solar Array Disconnect/Circuit Breaker 27.4 V 8.07 A 17.9 V 4.84 A 30 A 150 V dc, 8 A dc, resettable 17.2 x 15.9 x 12.0 cm (6.75 x 6.25 x 4.75 in) 2.40 kg (4.5 lb) 34 Festo Didactic

Sun Simulator Assembly 66151-00 The Sun Simulator Assembly consists of an ac light assembly used for illuminating solar panels in order to simulate the production of electrical energy from solar power. Power Requirements Current Service Installation Lamp Type Rating 5 A Standard single-phase outlet Quartz flood, with a five-minute timer switch 120 V ac, 600 W 66.0 x 101.6 x 35.6 cm (26.0 x 40.0 x 14.0 in) 8.16 kg (18 lb) DC Motor Controller (for Wind Simulator) 66153-00 The DC Motor Controller, a component of the Wind Simulator, is used to vary the speed of the dc motor to which it is connected. Power Requirements Current Service Installation Controller Type Input Rating Output Rating 5 A Standard single-phase ac outlet Variable speed 115 V ac, 50/60 Hz 0-90 V dc, 3.5 A dc Festo Didactic 35

12.1 x 22.2 x 8.9 cm (4.75 x 8.75 x 3.5 in) 1.22 kg (2.7 lb) Accessories Package 66154-00 The Accessories Package includes a battery charger, LED lamps, fluorescent lamps, incandescent lamps, 4 mm and 2 mm leads, and two-prong outlet bulb socket adapters. Outlet Bulb Socket Quantity 4 Lamp Quantity, Type, Voltage 1 LED at 120 V ac and 2.5 W 1 LED at 12 V dc and 2.5 W 1 fluorescent lamp at 120 V ac and 13 W 1 fluorescent lamp at 12 V dc and 13 W 1 pack of 4 incandescent lamps at 120 V ac and 60 W 1 incandescent lamp at 12 V dc and 25 W Battery Charger Type, Voltage, Quantity Smart, 12 V dc, 1 Power Requirements for the Battery Charger Current 2.4 A Service Installation Standard single-phase outlet 4 mm Safety Plug Leads Quantity, Color, Length 7 green of 30 cm (11.81 in) 3 green of 90 cm (35.43 in) 5 black of 90 cm (35.43 in) 5 black of 120 cm (47.24 in) 10 white of 120 cm (47.24 in) 2 mm Banana Plug Leads Quantity, Color, Length 10 red of 60 cm (23.62 in) 10 black of 60 cm (23.62 in) Connection Cables Kit 87339-00 The Connection Cables Kit provides all the connection cables required to connect the different components of the Solar/Wind Energy Training System. 36 Festo Didactic

Wind Turbine Generator 87359-00 The Wind Turbine Generator consists of an advanced battery-charging wind turbine with heavy-duty design that can be used in the most high-wind environments. It is ideally suited for combination with solar panels and for experimentation in electrical energy production from renewable sources. Energy Swept Area Rotor Diameter Startup Wind Speed Voltage Turbine Controller Body Blades Synchronous Generator Overspeed Protection Survival Wind Speed Mount Wind Speed Operating Range Optimum Wind Speed Range Approximately 30 kwh/mo at 5.8 m/s (13 mph) 1.07 m² (11.5 ft²) 1.17 m (46 in) 3.58 m/s (8 mph) 12, 24, and 48 V dc Microprocessor-based smart controller Permanent mold-cast aluminium Three blades, injection-molded composite Permanent-magnet brushless Electronic torque control 49.2 m/s (110 mph) 1.5 in schedule 40 pipe with a 48 mm (1.9 in) outer diameter 3.6-22 m/s (8-49 mph) 11-15 m/s (25-32 mph) TBE 5.9 kg (13 lb) EZ Tower Kit 87387-00 The EZ Tower Kit is a complete kit for assembling a 8.84 m (29 ft) EZ tower. It comprises all the hardware required to erect the tower such as pipes, anchors, and cables. An installation manual is provided with the kit. Two people are required to erect the tower, but no winches or vehicles are necessary. Kit Content Kit Content Flared pipe, 183 x 4.1 cm (72 x 1.625 in) Flared pipe, 91.4 x 4.1 cm (36 x 1.625 in) Straight pipe, 183 x 4.1 cm (72 x 1.625 in) Straight pipe, 91.4 x 4.1 cm (36 x 1.625 in) Anchors 90 degree angle Cable, 0.3 cm (0.125 in) Earth staples Cable clamps, 0.3 cm (0.125 in) Cable thimbles, 0.3 cm (0.125 in) Plastic Bag Manual Wire ties Guy wire plate stampings Hardware box Pipe box Festo Didactic 37

Air-Guyed Tower Kit 87446-00 The Air-Guyed Tower Kit is a kit for assembling a 8.23 m (27 ft) air-guyed tower. It comprises all the hardware necessary to erect the tower, except anchors, pipes, and concrete. An installation manual is provided with the kit. Two people are required to erect the tower, but no winches or vehicles are necessary. Kit Content Kit Content 1 wire set 2 tower base staples 2 bolts, 1 x 3.8 cm (0.375 x 1.5 in) 2 locknuts, 1 cm (0.375 in) 4 cable thimbles 8 cable clamps Optional Equipment Description Temperature Sensor (Optional) 46543-00 The Temperature Sensor consists of a temperature measurement device that can be used in conjunction with the Networked Data Acquisition System, Model 46120-J, in order to measure temperature. Manual Manual Description Networked Data Acquisition (User Guide) 87655-E0 Temperature Sensor Sensing Element Cable Maximum Temperature 100 Ω, Class A DIN 1 m (40 in), PFA insulated 230 C (450 F) 38 Festo Didactic

Grid-Tied Systems for Simulator - eseries (Optional) 46549-10 This site-license elearning course is intended to be used in conjunction with the Solar/Wind Energy Training System, Model 46120, and requires the Grid-Tied Simulation Software, Model 46120-A. It contains one course, which begins with a pretest and ends with a posttest. The course topics include Grid-Connected Equipment, Utility-Interactive Software, and The NEC. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted (emailed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading. The Grid-Tied Systems Simulation Software, Model 46120-A, expands on the knowledge acquired about solar and wind energy, and enables students to simulate the connection of the system to the ac power network, forming a grid-tied system. The following learning platforms are available. 46549-1: Grid-Tied Systems for Simulation Software - eseries 46549-2: Grid-Tied Systems for Simulation Software - SCORM 46549-3: Grid-Tied Systems for Simulation Software - Stand-Alone It is possible to combine the Grid-Tied Systems elearning course with the Grid-Tied Systems Simulation Software into a single bundle. The following variants are available: 46549-J: Grid-Tied Systems with Simulation Software - eseries 46549-K: Grid-Tied Systems with Simulation Software - SCORM 46549-L: Grid-Tied Systems with Simulation Software - Stand-Alone Computer Requirements A currently available personal computer running under one of the following operating systems: Windows 7 or Windows 8. Festo Didactic 39

Solar/Wind Energy Training System - eseries (Optional) 46549-E0 This site-license elearning course is intended to be used in conjunction with the Solar/Wind Energy Training System, Model 46120. It contains one course, which begins with a pretest and ends with a posttest. The course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted (emailed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading. The following learning platforms are available: 46549-E: Solar/Wind Energy Training System - eseries 46549-F : Solar/Wind Energy Training System - SCORM 46549-G: Solar/Wind Energy Training System - Stand-Alone An additional elearning course is available for use in conjunction with the Grid-Tied Systems Simulation Software, Model 46120-A. The software expands on the knowledge acquired about solar and wind energy, and enables students to simulate the connection of the system to the ac power network, forming a grid-tied system. The following learning platforms are available. 46549-1: Grid-Tied Systems for Simulation Software - eseries 46549-2: Grid-Tied Systems for Simulation Software - SCORM 46549-3: Grid-Tied Systems for Simulation Software - Stand-Alone Finally, it is possible to combine the Grid-Tied Systems elearning course with the Grid-Tied Systems Simulation Software into a single bundle. The following variants are available: 46549-J: Grid-Tied Systems with Simulation Software - eseries 46549-K: Grid-Tied Systems with Simulation Software - SCORM 46549-L: Grid-Tied Systems with Simulation Software - Stand-Alone Topic Coverage Energy Fundamentals Trainer Familiarization and Safety Solar Module Wind Turbine Solar Wind Systems Going Green 40 Festo Didactic

Computer Requirements A currently available personal computer running under one of the following operating systems: Windows 7 or Windows 8. Grid-Tied Systems with Simulator - eseries (Optional) 46549-J0 This site-license elearning course is intended to be used in conjunction with the Solar/Wind Energy Training System, Model 46120, and combines the Grid-Tied System for Simulation Software elearning course with the Grid-Tied System Simulation Software in a single bundle. It contains one course, which begins with a pretest and ends with a posttest. The course topics include Grid-Connected Equipment, Utility-Interactive Software, and The NEC. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted (emailed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading. The following learning platforms are available. 46549-J: Grid-Tied Systems with Simulation Software - eseries 46549-K: Grid-Tied Systems with Simulation Software - SCORM 46549-L: Grid-Tied Systems with Simulation Software - Stand-Alone Computer Requirements A currently available personal computer running under one of the following operating systems: Windows 7 or Windows 8. Solar/Wind Energy Training System Resource Package (Optional) 86862-A0 The Solar/Wind Energy Training System Resource Package provides instructions for the instructor on how to present the material and conduct interactive discussions using the student manuals provided with the training system. The package includes a CD with a slide-show presentation as well as a Facilitator Guide. Manual Manual Description Facilitator Guide (Student Manual) 86862-00 Table of Contents of the Manual(s) Facilitator Guide (Student Manual) (86862-00) Festo Didactic 41

1 Energy Fundamentals 2 Training Familiarization Safety 3 Solar Module 4 Wind Turbine 5 Solar/Wind Systems 6 Going Green 42 Festo Didactic

Reflecting the commitment of Festo Didactic to high quality standards in product, design, development, production, installation, and service, our manufacturing and distribution facility has received the ISO 9001 certification. Festo Didactic reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Festo Didactic recognizes all product names used herein as trademarks or registered trademarks of their respective holders. Festo Didactic Inc. 2018. All rights reserved. Festo Didactic SE Rechbergstrasse 3 73770 Denkendorf Germany P. +49(0)711/3467-0 F. +49(0)711/347-54-88500 Festo Didactic Inc. 607 Industrial Way West Eatontown, NJ 07724 United States P. +1-732-938-2000 F. +1-732-774-8573 Festo Didactic Ltée/Ltd 675 rue du Carbone Québec QC G2N 2K7 Canada P. +1-418-849-1000 F. +1-418-849-1666 www.labvolt.com www.festo-didactic.com Festo Didactic 43