Masoneilan* Series Camflex* II

Technical Specifications Rev. C - 0/208 Masoneilan* 35002 Series Camflex* II Rotary Control Valves Complete line of eccentric plug control valves effectively combining enhanced control performance, simplicity and long-term reliability for a broad range of applications. BHGE Data Classification : Public

Table of Contents Features... Numbering System... 2 Actuator Mounting Guide... 3 General Data / Ratings and Connections...4-6 C V and F L Versus Travel...6-7 C V Versus Travel... 8 Materials of Construction... 9-3 Dimensions and Weights...4-5 Features The Camflex II valve is a heavy-duty, automatic-throttling control valve that incorporates the following features: The flangeless body rating is a rugged ANSI Class 600. Heavy-duty guide lugs assure quick, positive alignment during installation. The flanged version is available at in. through 2 in. (25 mm through 300 mm) in 50 or 300 ANSI, and in. through 8 in. (25 mm through 200 mm) in 600 ANSI. Separable bonnet design is available. Straight through flow pattern provides greater flow capacities. Standard integral extension bonnet allows for a wide range of fluid temperature applications (-320 F to 750 F), (-96 C to 400 C). The unique self-aligning eccentric rotating plug provides tight shutoff and low dynamic forces. The triple, over-sized bearing system provides exceptional plug shaft guiding. The shouldered shaft design is utilized. An optional patented differential velocity device (DVD) separates compressible flowstreams into a high velocity core and a low velocity envelope flowstream. This provides up to 8 dba noise attenuation. Optional alloy constructions are available. The powerful, low-profile, spring-diaphragm actuator guarantees positive fail-safe action. Splined shaft and actuator linkages, combined with low-friction techniques, contribute to reduced deadband and hysteresis. The valve position indicator is large and highly visible. The actuator linkage (purge option available) is totally enclosed). A large variety of reduced-trim options are available in all sizes. 208 Baker Hughes, a GE company. All rights reserved. Masoneilan 35002 Series Camflex II Rotary Control Valves Tech Spec

Numbering System st 2nd st 3 2nd 5 3rd 4th 5th 2 SB Actuator Type Body Series Actuator Mounting (see guide on page 3) Trim Type Design Series Design 20 Manual Actuator 35 Spring-opposed rolling-diaphragm 35. Parallel to pipeline, valve closes on stem extension.. Metal Seat 2. Soft Seat 3. Metal Seat w/ 2 SB Differential Velocity Trim 2. Parallel to pipeline, valve opens on stem extension. 3. Perpendicular to pipeline, valve closes on stem extension. 4. Perpendicular to pipeline, valve opens on stem extension. 5. Parallel to pipeline, valve closes on stem extension. 6. Parallel to pipeline, valve opens on stem extension. 7. Perpendicular to pipeline, valve closes on stem extension. 8. Perpendicular to pipeline, valve opens on stem extension. 4. Soft Seat w/ Differential Velocity Trim (optional separable bonnet) 2 BHGE 208 Baker Hughes, a GE company. All rights reserved.

Actuator Mounting Guide Camflex II Control Valves (Mounted On Horizontal Pipeline) 3 5-3 5. 0 2 F.T.O Plug Position F.T.C Plug Position 2 F.T.C F.T.O Masoneilan CAMFLEX II 8 Masoneilan CAMFLEX II Actuator Position in Relation to Valve Body Numbering System : to 8 AIR-TO-OPEN Flow-To-Close Recommended Flow Direction Flow-To-Open F.T.O Plug Position Plug Position F.T.C F.T.C 6 F.T.O 4 Masoneilan CAMFLEX II Masoneilan CAMFLEX II Plug Position F.T.C Plug Position F.T.C F.T.O Plug Position Masoneilan CAMFLEX II 3 AIR-TO-CLOSE Flow-To-Close Flow-To-Open Recommended Flow Direction F.T.O Plug Position Masoneilan CAMFLEX II F.T.O F.T.C F.T.O Masoneilan CAMFLEX II 5 F.T.C Masoneilan CAMFLEX II 7 Notes: NOTES : It is recommended that the actuator always be mounted as shown above. For other positions, consult your local sales office. 2. Standard actuator mounting positions are shaded : Installation is assumed to be in the horizontal pipeline for orientation of the airset and other accessories unless specified on the order. 2. Plug positions are shown in the initial position without air on actuator. Action and orientation are field reversible without additional parts. 3. The actuator must be always mounted above the pipeline. Operating efficiencies may vary depending on valve configuration. The above schematic does not reflect every possible body/actuator orientation, but should serve as an effective guide. 208 Baker Hughes, a GE company. All rights reserved. Masoneilan 35002 Series Camflex II Rotary Control Valves Tech Spec 3

General Data Body Type: Flow Direction: Materials: cast with integral bonnet cast with separable bonnet in.-8 in. flow to open or flow to close (Differential Velocity Device trim flow to open only) carbon steel 36 stainless steel (flangeless) 36L stainless steel (flanged) Hastelloy C ( in.-4 in.) (DN 25-00) Body Pressure Rating: ANSI Class 600 (per B6.34) standard ( in.-2 in.) (DN 25-300), except for flanged constrution: valve rating is limited by flange rating End Connections: Trim Plug Type: threaded NPT for ANSI Class 600 rated connections ( in.) (DN 25) flangeless clamps between ANSI Class 50, 300 or 600 rated flanges (flange rating must be specified for 8 in.-2 in. (DN 200-300) valve for locator lug drilling and tapping) flanged - bolts to ANSI Class 50 or 300 rated flanges ( in.-2 in.) (DN 25-300) ANSI Class 600 rated flanges ( in.- 8 in.) (DN 25-200) self-aligning eccentrically rotating Spring-Opposed Rolling Diaphragm Size: 4½ in. diameter with 3½ in. (89mm) stroke ( in.-2 in. valves), (DN 25-50) 6 in. diameter with 5¾ in. (46mm) stroke (3 in.-4 in. valves), (DN 80-00) 7 in. diameter with 7¼ in. (84mm) stroke (6 in.-2 in. valves), (DN 50-300) 9 in. diameter with 7¼ in. (84mm) stroke (6 in.-2 in. valves), (DN 50-300) Range: 7-5 psi ( in.-4 in.), (DN 25-00) 7-24 psi (6 in.-2 in.), (DN 50-300)(7 in. diameter actuator) 7-24 psi (6 in.-2 in.), (DN 50-300) (9 in. diameter actuator, Air to Close) 8-25 psi (6 in.-2 in.), (DN 50-300) (9 in. diameter actuator, Air to Open) Air Connection: Yoke: Bearing: Auxiliary Handwheel: Manual Actuator 4 in. NPT cast iron sealed radial solid disk with locking nut: 6 2 5 in. diameter ( in.-4 in. valves), (DN 25-00) 0 in. diameter (6 in.-2 in. valves), (DN 50-300) Materials: in.-2 in. (DN 25-00): solid Stellite No. 6 3 in.-4 in. (DN 80 & 00): solid Stellite No. 6 optional 3 in.-2 in. (DN 80-300): 36L stainless steel with hardfaced seating surface in.-4 in. (DN 25-00): Hastelloy C Seat Ring: Materials: solid clamped in.-2 in. (DN 25-300): 36 stainless steel in.-4 in. (DN 25-00): Hastelloy C in.-2 in. (DN 50-300): 36 stainless steel with hardfaced seat in.-4 in. (DN 25-00): solid Stellite No. 6 optional in.-2 in. (DN 25-300): 36 stainless steel with PTFE insert (to 450 F), (232 C) 2 Type: Sizes: Material: Yoke: Solid disk with detent anti-rotation device. Continuously connected. 7 in. (78mm) diameter ( in.-2 in. valves), (DN 25-50) 8 7 8 in. (225mm) diameter (3 in. & 4 in. valves), (DN 80-00) 6 8 in. (40mm) diameter (6 in.-2 in. valves), (DN 50-300) aluminum cast iron Retainer: 36 Stainless Steel Bearing: sealed radial ball Capacity: full area and reduced capacity in all sizes Flow Characteristic: standard trim: linear low flow trim (.036 +.07 factor): linear (requires SVI) differential velocity device: linear C V Ratio: standard trim >00: low flow trim 5: differential velocity device >50: Actuators See materials of construction 2 Not available in.2 factor or Low Flow Trim sizes 4 Masoneilan 35002 Series Camflex II Rotary Control Valves Tech Spec 208 Baker Hughes, a GE company. All rights reserved.

General Data Standard Spring Diaphragm Actuator Materials Yoke Standard Actuator Characteristics and Travel Times [Measured with direct positioner at 30 psi (2 bar) supply, 4700P positioner with tubing size ¼ in.] Travel Time (sec.) Actuator Diaphragm Actuator Diameter Effective Stroke Increasing Decreasing Area Instrument Instrument in. cm sq. in. cm 2 in. cm Signal Signal 4½.4 4 90 3½ 8.9.2 2.4 6 5.2 24 55 5¾ 4.6 3 6.3 7 7.8 36 232 7¼ 8.4 7.6 9.8 9 22.9 75 483 7¼ 8.4 7 24 Temperature/Seat Leakage Valve Size in. Description Yoke Covers Spring Barrel Diaphragm Case Piston Diaphragm Piston Rod Clevis Clevis Pin Lever Lever Bearing Handwheel and Locknut DN -2 25-300 Seat Type Metal Cast Iron Polycarbonate For Stainless Steel Bodies only. 2 Temperature limited by Teflon Seal. Temp. Range Min. -320 F (-96 C) Soft Seat 2-320 F (-96 C) Material Die Cast Aluminum Die Cast Aluminum Die Cast Aluminum Buna-N with Dacron Insert 303 St. St. Carbon Steel Zinc Dichromate Plated 7-4 PH (H075) St. St. Steel With Epoxy Surface PTFE Filament Surface Bonded to Glass Reinforced Plastic Backing Aluminum Max. +750 F (400 C) +450 F (232 C) Max. Seat Leakage, ANSI FCI/70.2 Class IV VI 750 F (400 C) 650 F (340 C) 550 F (300 C) 450 F (230 C) 350 F (80 C) 250 F (20 C) 50 F (70 C) Maximum Rated Flow Coefficients (C V ) and Critical Flow Factors (F L ) at Maximum Opening (50 ) Valve Size Flow to Open Flow to Close Factor inches DN Rated C V F L Rated C V F L 0.036.5 0.98.5 0.86 0.07 0.98 0.86 0.2 2.8 0.88 3 0.7 25 0.4 5.6 0.88 6 0.7 0.6 8.4 0.88 9 0.7 4 0.85 5 0.68 DVD 5 0.4 3.2 0.88 5.6 0.7.5 40 0.6 9.8 0.88 23.4 0.7 33 0.85 39 0.68 DVD 2.5 0.4 20 0.88 2.2 0.7 2 50 0.6 30 0.88 3.8 0.7 50 0.85 53 0.68 DVD 8 0.4 54 0.88 58 0.7 3 80 0.6 8 0.88 87 0.7 35 0.85 45 0.68 DVD 48 0.4 92 0.88 92 0.7 4 00 0.6 38 0.88 38 0.7 230 0.85 230 0.68 DVD 78 0.4 200 0.88 200.07 6 50 0.6 300 0.88 300 0.7 500 0.85 500 0.68 DVD 8 0.4 340 0.88 340 0.7 8 200 0.6 50 0.88 50 0.7 850 0.85 850 0.68 DVD 308 0.4 520 0.88 520 0.7 0 250 0.6 780 0.88 780 0.7 300 0.85 300 0.68 DVD 486 0.4 700 0.88 700 0.7 2 300 0.6 050 0.88 050 0.7 750 0.85 750 0.68 DVD 684 Note: Low flow trims (.036+.07 factor) require use of SVI II AP or SVI FF digital positioners. Temperature Gradient Across Standard Integral Bonnet The ability of the Camflex valve to handle a wide range of process fluid temperatures is due to the long, integrally-cast bonnet. This affords ample radiation surface to normalize the packing temperatures. 208 Baker Hughes, a GE company. All rights reserved. Masoneilan 35002 Series Camflex II Rotary Control Valves Tech Spec 5

Ratings and Connections Valve Size ANSI Class in. DN 50 300 600-2 25-50 o o o 3-8 80-200 o o o 0-2 250-300 o o o Threaded o Flangeless RF Flanged Note: For flangeless valve sizes 8 in.-2 in., (200mm-300mm), please specify ANSI Class rating. Face to Face: ISA S75.04 C V and F L Versus Travel Flow Direction: Flow to Open Flow Characteristics: Linear ANSI Class: 50 through 600 Sizes: in. through 2 in. (DN 25-300) Valve Size Percent of Plug Rotation 0 20 30 40 50 60 70 80 90 00 F L Full Area 0.96 0.93 0.9 0.89 0.88 0.87 0.87 0.86 0.86 0.85 F L Reduced Area (.6,.4, &.2) 0.96 0.93 0.9 0.89 0.88 0.88 0.88 0.88 0.88 0.88 Orifice Dia. Act. Stem Travel in. DN in. mm in. mm 25 Rated C V.32 8.2 3.50 89 0.4 0.8..4.7 2.0 2.3 2.5 2.7 2.8.500 2.7 3.50 89 0.5 0.9.4 2.0 2.7 3.5 4.2 4.8 5.2 5.6.579 4.7 3.50 89 0.6.3 2.2 3. 4.2 5.3 6.4 7.2 7.9 8.4.78 8.2 3.50 89 0.9 2. 3.7 5.7 7.8 9.6. 2.4 3.3 4.750 9. 3.50 89. 2. 3.3 4.7 6.5 8.4 9.9.2 2.3 3.2 ½ 40.907 23.0 3.50 89.4 3.2 5. 7.4 0.0 2.7 5.0 7. 8.6 9.8.25 28.6 3.50 89 2.0 5.0 8.6 3 9 22 26 29 32 33.000 25.4 3.50 89.6 3.2 5.0 7.2 9.8 2.6 5.0 7.0 8.7 20 2 50.59 29.4 3.50 89 2. 4.8 7.7.2 5. 9. 22.7 25.8 28.2 30.437 36.5 3.50 89 3. 7.5 3.3 20.5 28 34.2 39.8 44.2 47.5 50.500 38. 5.75 46 4.9 9.4 4. 20.0 26.5 33.5 39.8 45.4 50.2 54 3 80.874 47.6 5.75 46 5.7 2. 9.6 27.6 37.5 47.9 58.4 68.0 75.9 8 2.324 59.0 5.75 46 8.8 7.7 29.8 44.5 60.7 78.3 96.2 3 27 35 2.000 50.8 5.75 46 8.4 6. 24.0 34. 45. 57. 67.8 77.4 85.6 92 4 00 2.49 6.4 5.75 46 9.7 20.7 33.4 47.0 63.8 8.6 99.4 6 29 38 3.000 76.2 5.75 46 5.0 30.2 50.8 75.8 04 33 64 93 26 230 3.000 76.2 7.25 84 8.2 34.9 52.2 74. 98.0 24 47 68 86 200 6 50 3.629 92.2 7.25 84 2.2 44.9 72.7 02 39 77 26 252 28 300 4.500 4 7.25 84 32.7 65.7 0 65 225 290 356 49 470 500 3.797 96.4 7.25 84 22.0 44.2 7.9 07 50 96 24 283 37 340 8 200 4.840 23 7.25 84 3.3 63.6 4 78 246 33 374 425 468 50 6.000 52 7.25 84 42.8 20 36 434 542 639 725 798 850 4.746 2 7.25 84 33.7 67.6 0 64 230 300 369 432 485 520 0 250 6.050 54 7.25 84 47.8 97.3 75 273 376 478 572 650 76 780 7.500 9 7.25 84 65.5 70 307 483 663 828 977 09 22 300 5.780 47 7.25 84 45.3 9.0 48 22 309 403 497 582 652 700 2 300 7.460 89 7.25 84 64.4 3 235 367 506 644 769 875 964 050 9.250 235 7.25 84 88. 228 44 650 893 5 35 493 644 750 6 Masoneilan 35002 Series Camflex II Rotary Control Valves Tech Spec 208 Baker Hughes, a GE company. All rights reserved.

C V and F L Versus Travel Flow Direction: Flow to Close Flow Characteristics: Linear ANSI Class: 50 through 600 Sizes: in. through 2 in. (DN 25-300) Valve Size Percent of Plug Rotation 0 20 30 40 50 60 70 80 90 00 F L Full Area 0.94 0.9 0.88 0.83 0.80 0.77 0.74 0.72 0.70 0.68 F L Reduced Area (.6,.4, &.2) 0.94 0.9 0.88 0.83 0.80 0.77 0.74 0.72 0.70 0.7 Orifice Dia. Act. Stem Travel in. DN in. mm in. mm 25 Rated C V.32 8.2 3.50 89 0.4 0.9.2.5.8 2. 2.5 2.7 2.9 3.500 2.7 3.50 89 0.5.0.5 2. 2.9 3.8 4.5 5. 5.6 6.579 4.7 3.50 89 0.6.4 2.4 3.3 4.5 5.7 6.9 7.7 8.5 9.78 8.2 3.50 89.0 2.3 4.0 6. 8.4 0.3.9 3.3 4.3 5.750 9. 3.50 89.3 2.5 3.9 5.6 7.7 9.9.7 3.2 4.5 5.6 ½ 40.907 23.0 3.50 89.7 3.8 6.0 8.7.8 5.0 7.7 20.2 22.0 23.4.25 28.6 3.50 89 2.4 5.9 0.2 5.4 22.5 26.0 30.7 34.3 37.8 39.000 25.4 3.50 89.7 3.4 5.3 7.6 0.4 3.4 5.9 8.0 9.8 2.2 2 50.59 29.4 3.50 89 2.2 5. 8.2.9 6.0 20.2 24. 27.3 29.9 3.8.437 36.5 3.50 89 3.3 8.0 4. 2.7 29.7 36.3 42.2 46.9 50.4 53.500 38. 5.75 46 5.3 0. 5. 2.5 28.5 36.0 42.7 48.8 53.9 58 3 80.874 47.6 5.75 46 6. 3.0 2. 29.6 40.3 5.4 62.7 73.0 8.5 87 2.324 59.0 5.75 46 9.5 9.0 32.0 47.8 65.2 84. 03 2 36 45 2.000 50.8 5.75 46 8.4 6. 24.0 34. 45. 57. 67.8 77.4 85.6 92 4 00 2.49 6.4 5.75 46 9.7 20.7 33.4 47.0 63.8 8.6 99.4 6 29 38 3.000 76.2 5.75 46 5.0 30.2 50.8 75.8 04 33 64 93 26 230 3.000 76.2 7.25 84 8.2 34.9 52.2 74. 98.0 24 47 68 86 200 6 50 3.629 92.2 7.25 84 2.2 44.9 72.7 02 39 77 26 252 28 300 4.500 4 7.25 84 32.7 65.7 0 65 225 290 356 49 470 500 3.797 96.4 7.25 84 22.0 44.2 7.9 07 50 96 24 283 37 340 8 200 4.840 23 7.25 84 3.3 63.6 4 78 246 33 374 425 468 50 6.000 52 7.25 84 42.8 20 36 434 542 639 725 798 850 4.746 2 7.25 84 33.7 67.6 0 64 230 300 369 432 485 520 0 250 6.050 54 7.25 84 47.8 97.3 75 273 376 478 572 650 76 780 7.500 9 7.25 84 65.5 70 307 483 663 828 977 09 22 300 5.780 47 7.25 84 45.3 9.0 48 22 309 403 497 582 652 700 2 300 7.460 89 7.25 84 64.4 3 235 367 506 644 769 875 964 050 9.250 235 7.25 84 88. 228 44 650 893 5 35 493 644 750 208 Baker Hughes, a GE company. All rights reserved. Masoneilan 35002 Series Camflex II Rotary Control Valves Tech Spec 7

C V Versus Travel Differential Velocity Device (DVD) Flow Direction: Flow to Open only Flow Characteristics: Linear ANSI Class: 50 through 600 Sizes: in. through 2 in. (DN 25-300) Percent of Plug Rotation 0 20 30 40 50 60 70 80 90 00 Valve Size Orifice Dia. Act. Stem Travel in. DN in. mm in. mm 25 0.579 4.7 3.5 89 0.52.04.88 2.62 3.23 3.76 4.22 4.58 4.84 5.00.5 40 0.907 23.0 3.5 89.30 2.60 4.69 6.54 8.06 9.4 0.5.4 2. 2.5 2 50.59 29.4 3.5 89.88 3.75 6.75 9.42.6 3.6 5.2 6.5 7.4 8.0 3 80.874 47.6 5.75 46 5.00 0.0 8.0 25. 3.0 36. 40.5 43.9 46.4 48.0 4 00 2.49 6.4 5.75 46 8.3 6.3 29.3 40.8 50.3 58.7 65.8 7.4 75.4 77.0 6 50 3.629 92.2 7.25 84 8.9 37.7 67.9 94.7 6 36 53 66 75 8 8 200 4.84 23 7.25 84 32. 64.2 6 6 99 232 260 282 298 308 0 250 6.05 54 7.25 84 50.6 0 82 254 33 366 40 445 470 486 2 300 7.46 89 7.25 84 7.3 43 257 358 44 55 577 626 66 684 Note: The differential velocity device is used for aerodynamic noise reduction. It must be used with.6 factor trim flow to open. Flow Direction Differential Velocity Device Low Noise Device Body 8 Masoneilan 35002 Series Camflex II Rotary Control Valves Tech Spec 208 Baker Hughes, a GE company. All rights reserved.

Materials of Construction 3 4 Body with Separable Bonnet 6 2 25 Body Optional Slurry Package Seal Bushings 8B 8 8 7 6 5 2 9 20 9 3 5 4 Body with Integral Bonnet Standard Camflex Packing Arrangement EF Seal (Emission Free) Double O-Ring Seal Packing Follower Fugitive Emission Containment Package for Zero Leakage 7B 7A Lower Guide Bushing 8A 7 O-Ring Provides long term reliable extremely low emission shaft seal performance. This economical solution to fugitive emissions will not compromise control performance, and is suitable for use in environmentally sensitive applications. Upper Guide Bushing Factory Mutual Certified Report 208 Baker Hughes, a GE company. All rights reserved. Masoneilan 35002 Series Camflex II Rotary Control Valves Tech Spec 9

Materials of Construction Carbon Steel Construction Ref. No. Temperature Range Description 20 F +400 F +450 F +750 F 29 C +205 C +232 C +400 C Materials 2 Body Seat Ring A26 Gr WCC 36 St. St. ASTM A35 Gr CF8M 36 St. St ASTM A35 Gr CF8M + Stellite Hardfacing Optional ASTM A479 TY 36 St. St. + PTFE in. to 6 in. (DN 25-50) 36 St. St. A35 Gr CF8M + PTFE 8 in. to 2 in. (DN 200-300) 3 Seat Ring Retainer 36 St. St. ASTM A35 Gr CF8M 4 Plug Solid Stellite in. to 2 in. (DN 25-50) 36L St. St. ASTM A35 Gr CF3M + Stellite Hardfacing 3 in. to 2 in. (DN 80-300) 5 Shaft 7-4 PH ASTM A564 Gr 630 (H075) 6 Spacer ASTM A32 TY 36 7 Upper Guide ASTM A276 TY 440C Upper Guide + O-Ring STELLITE No. 6 + VITON 8 Lower Guide ASTM A276 TY 440C Lower Guide + O-Ring STELLITE No. 6 + VITON 9 Safety Pin ASTM A479 TY 36 Packing Follower ASTM A582 TY 303 O-Ring Packing Follower VITON 2 Packing CARBON CORE BRAIDED PTFE 3 Packing Flange Carbon Steel ASTM A05 Zinc Plated 4 Packing Flange Stud 304 St. St. ASTM A93 Gr B8 5 Packing Flange Stud Nut 304 St. St. ASTM A94 GR 8 6 Packing Box Ring ASTM A479 TY 36 9 Body Stud 304 St. St. ASTM A93 Gr B8 20 Body Stud Nuts 304 St. St. ASTM A94 Gr 8 2 Bonnet Carbon Steel A26 GR WCC 22 Body / Bonnet Stud ASTM A 93 Gr B8 Class 2 23 Body / Bonnet Nut ASTM A 94 Gr 8 24 Body Gasket AISI 36L + GRAPHITE 25 DVD Low Noise Plate ASTM A479 TY 36 Separable Bonnet version only. NACE Carbon Steel Construction Temperature Range 20 F +400 F +750 F Ref. 29 C +205 C +400 C No. Description Materials Body Carbon Steel A26 Gr WCC 2 Seat Ring 36 St. St. ASTM A35 Gr CF8M 36 St. St ASTM A35 Gr CF8M + Stellite Hardfacing Optional 3 Seat Ring Retainer 36 St. St. ASTM A35 Gr CF8M 4 Plug Solid Stellite in. to 2 in. (DN 25-50) 36L St. St. ASTM A35 Gr CF3M + Stellite Hardfacing 3 in. to 2 in. (DN 80-300) 5 Shaft ASTM A479 TY 36 St. St 6 Spacer ASTM A32 TY 36 7 Upper Guide STELLITE No. 6 Upper Guide + O-Ring STELLITE No. 6 + VITON 8 Lower Guide STELLITE No. 6 Lower Guide + O-Ring STELLITE No. 6 + VITON 9 Safety Pin ASTM A479 TY 36 Packing Follower ASTM A479 TY 36 O-Ring Packing Follower VITON 2 Packing CARBON CORE BRAIDED PTFE 3 Packing Flange Carbon Steel ASTM A05 Zinc Plated 4 Packing Flange Stud 304 St. St. ASTM A 93 GR B8 5 Packing Flange Stud Nut 304 St. St. ASTM A94 GR 8 6 Packing Box Ring ASTM A479 TY 36 9 Body Stud 304 St. St. ASTM A93 Gr B8 20 Body Stud Nuts 304 St. St. ASTM A94 Gr 8 25 DVD Low Noise Plate ASTM A479 TY 36 Note: Standard materials and processes are in accordance with the requirements of NACE specification MR003. Applications requiring compliance to MR075-2003 or ISO 556 must be reviewed by BHGE. 0 Masoneilan 35002 Series Camflex II Rotary Control Valves Tech Spec 208 Baker Hughes, a GE company. All rights reserved.

Materials of Construction Stainless Steel Construction Ref. No. Body Temperature Range Description 2 Seat Ring Separable Bonnet version only. 320 F 58 F +400 F +450 F +750 F 96 C 50 C +205 C +232 C +400 C Materials Flangeless Body 36 St. St. ASTM A35 Gr CF8M Flanged Body 36L St. St. ASTM A35 GR CF3M 36 St. St. ASTM A35 Gr CF8M 36 St. St ASTM A35 Gr CF8M + Stellite Hardfacing Optional ASTM A479 TY 36 St. St. + PTFE in. to 6 in. (DN 25-50) 36 St. St. A35 Gr CF8M + PTFE 8 in. to 2 in. (DN 200-300) 3 Seat Ring Retainer 36 St. St. ASTM A35 Gr CF8M 4 Plug Solid Stellite in. to 2 in. (DN 25-50) 36L St. St. ASTM A35 Gr CF3M + Stellite Hardfacing N 6 3 in. to 2 in. (DN 80-300) 5 Shaft 36 St. St. ASTM A479 TY 36 ASTM A564 Gr 630 (H075) Optional 6 Spacer ASTM A 32 TY 36 7 Upper Guide STELLITE No. 6 Upper Guide + O-Ring STELLITE No. 6 + VITON 8 Lower Guide STELLITE No. 6 Lower Guide + O-Ring STELLITE No. 6 + VITON 9 Safety Pin ASTM A479 TY 36 Packing Follower ASTM A582 TY 303 O-Ring VITON 2 Packing CARBON CORE BRAIDED PTFE 3 Packing Flange ASTM A82 GR F304 4 Packing Flange Stud 304 St. St. ASTM A93 Gr B8 5 Packing Flange Stud Nut 304 St. St. ASTM A94 Gr 8 6 Packing Box Ring ASTM A479 TY 36 9 Body Stud 304 St. St. ASTM A 93 Gr B8 20 Body Stud Nuts 304 St. St. ASTM A94 Gr 8 2 Bonnet 36L St.St. ASTM A35 Gr CF3M 22 Body / Bonnet Stud 304 St. St. ASTM A93 GR B8 CL 2 23 Body / Bonnet Nut 304 St. St. ASTM A94 GR 8 24 Body Gasket AISI 36L + GRAPHITE 25 DVD Low Noise Plate ASTM A479 TY 36 208 Baker Hughes, a GE company. All rights reserved. Masoneilan 35002 Series Camflex II Rotary Control Valves Tech Spec

Materials of Construction NACE Stainless Steel Construction Ref. No. Body Temperature Range Description 2 Seat Ring 20 F +400 F +750 F 29 C +205 C +400 C Materials Flangeless Body 36 St. St. ASTM A35 Gr CF8M Flanged Body 36L St. St. ASTM A35 Gr CF3M 36 St. St. ASTM A35 Gr CF8M 36 St. St ASTM A35 Gr CF8M + Stellite Hardfacing 3 Seat Ring Retainer 36 St. St. ASTM A35 Gr CF8M 4 Plug Solid Stellite in. to 2 in. (DN 25-50) 36L St. St. ASTM A35 Gr CF3M + Stellite Hardfacing 3 in. to 2 in. (DN 80-300) 5 Shaft ASTM A479 TY 36 St. St. 6 Spacer ASTM A32 TY 36 7 Upper Guide STELLITE No. 6 Upper Guide + O-Ring STELLITE No. 6 + VITON 8 Lower Guide STELLITE No. 6 Lower Guide + O-Ring STELLITE No. 6 + VITON 9 Safety Pin ASTM A479 TY 36 Packing Follower ASTM A479 TY 36 O-Ring VITON 2 Packing CARBON CORE BRAIDED PTFE 3 Packing Flange ASTM A82 GR F304 4 Packing Flange Stud 304 St. St. ASTM A93 Gr B8 5 Packing Flange Stud Nut 304 St. St. ASTM A94 Gr 8 6 Packing Box Ring ASTM A479 TY 36 9 Body Stud 304 St. St. ASTM A 93 Gr B8 20 Body Stud Nuts 304 St. St. ASTM A94 Gr 8 25 DVD Low Noise Plate ASTM A479 TY 36 Note: Standard materials and processes are in accordance with the requirements of NACE specification MR003. Applications requiring compliance to MR075-2003 or ISO 556 must be reviewed by BHGE. 2 Masoneilan 35002 Series Camflex II Rotary Control Valves Tech Spec 208 Baker Hughes, a GE company. All rights reserved.

Materials of Construction Hastelloy C Construction in. to 4 in. Ref. No. Temperature Range 320 F 58 F +400 F +500 F 96 C 50 C +205 C +260 C Materials Description Body ASTM A494 Gr CX-2 MW 2 Seat Ring HASTELLOY C22 HASTELLOY C22 + PTFE 3 Seat Ring Retainer HASTELLOY C22 4 Plug HASTELLOY C22 5 Shaft HASTELLOY C22 6 Spacer HASTELLOY C22 Upper Guide STELLITE No. 6 7 Upper Guide ALLOY 25 Upper Guide ULTIMET Upper Guide + O-Ring STELLITE No. 6 + VITON Lower Guide STELLITE No. 6 8 Lower Guide ALLOY 25 Upper Guide ULTIMET Lower Guide + O-Ring STELLITE No. 6 + VITON 9 Safety Pin HASTELLOY C22 Packing Follower HASTELLOY C22 O-Ring VITON 2 Packing CARBON CORE BRAIDED PTFE 3 Packing Flange ASTM A82 Gr F304 4 Packing Flange Stud 304 St. St. ASTM A93 Gr B8 5 Packing Flange Stud Nut 304 St. St. ASTM A94 Gr 8 6 Packing Box Ring HASTELLOY C22 9 Body Stud 304 St. St. ASTM A93 Gr B8 20 Body Stud Nuts 304 St. St. ASTM A94 Gr 8 25 DVD Low Noise Plate HASTELLOY C22 Note: Standard materials and processes are in accordance with the requirements of NACE specification MR003. Applications requiring compliance to MR075-2003 or ISO 556 must be reviewed by BHGE. Material selection must be based on fluid properties and compatibility. 208 Baker Hughes, a GE company. All rights reserved. Masoneilan 35002 Series Camflex II Rotary Control Valves Tech Spec 3

Dimensions and Weights Dimensions (inches) Valve size in. DN Threaded ends A Flanged and flangeless B C D E F G Threaded ends H J K L 25 4.00 4.00 6.8.5 0.0 6.3 5.5 4.4 2.64 2.64 2.0 8..5 5.4 6.5 9.0 9.0 9.0 /2 40 4.50 6.9.5 0.0 6.3 5.5 4.4 2.44 2.32 9.2 2.0 6.5 6.5 0.0 0.0 0.0 2 50 4.88 6.9.5 0.0 6.3 5.5 4.5 2.44 2.44 9.4 2.6 6.7 0.5 0.5 0.5 0.5 3 80 6.50 0.3 6.8 0.5 6.3 6.9 5. 3.82 3.39 3. 3.3 9.6.8 3.5 4.0 4.0 4 00 7.62 0.4 6.8 0.5 6.3 6.9 5.2 4.7 4.7 4.0 4.3 0.5 3.0 4.0 6.0 6.5 6 50 9.00 2.3 20.4 2.0 0.0 8.6 8.4 5.00 5.00 7.0 5.8 2.7 5.5 6.0 8.5 8.5 8 200 9.56 2.3 20.4 2.0 0.0 8.6 8.5 5.83 5.83 8.5 8.0 4.2 5.5 8.5 9.5 2.0 0 250.69 2.3 20.4 2.0 0.0 8.6 8.6 6.57 6.57 22.6 9.9 8.3 20.0 20.5 22.5 24.5 2 300 3.3 2.3 20.4 2.0 0.0 8.6 8.7 7.24 7.24 24.0 0.9 9.7 20.0 22.5 24.8 25.5 Flangeless Flanged ANSI Class 50 PN 0 ANSI Class 300 PN 6 M ANSI Class 400 PN 25 ANSI Class 600 PN 40 Weight (lbs.) Valve size Actuator size Flangeless Flanged Class 50 Flanged Class 300 Flanged Class 600 in. DN Kg lbs. Kg lbs. Kg lbs. Kg lbs. 25 4.5 in. 7 38 8 4 20 45 20 45 /2 40 4.5 in. 9 43 22 50 24 54 25 55 2 50 4.5 in. 20 45 24 54 27 60 28 63 3 80 6 in. 46 03 52 6 57 29 59 33 4 00 6 in. 54 2 65 46 73 65 83 86 6 50 7 in. 03 232 5 259 3 295 56 35 8 200 7 in. 22 274 40 34 6 363 67 442 0 250 7 in. 78 400 203 456 236 53 2 300 7 in. 222 499 260 586 307 689 6 50 No.9 3 295 43 32 59 358 84 44 8 200 No.9 50 337 68 377 89 426 224 505 0 250 No.9 206 463 23 59 264 594 2 300 No.9 250 562 288 648 335 752 Specific Dimensions (inches) for the No.9 Actuator Valve size in. DN B C D E F G L 6 50 4.69 26.54 2.05 5.75.97.26.02 8 200 4.80 26.54 2.05 5.75.97.38 2.52 0 250 4.92 26.54 2.05 5.75.97.50 6.6 2 300 5.04 26.54 2.05 5.75.97.6 7.99 4 Masoneilan 35002 Series Camflex II Rotary Control Valves Tech Spec 208 Baker Hughes, a GE company. All rights reserved.

Dimensions and Weights Dimensions (millimeters) Valve size in. DN Threaded ends A Flanged and flangeless B C D E F G Threaded ends H J K L 25 02 02 73 293 253 60 40 2 67 67 5 206 38 37 65 229 229 229 /2 40 4 75 293 253 60 40 3 62 59 234 5 65 65 254 254 254 2 50 24 76 293 253 60 40 5 62 62 239 66 70 267 267 267 267 3 80 65 262 426 266 60 75 30 97 86 333 84 244 300 343 356 356 4 00 94 264 426 266 60 75 3 06 06 356 09 267 330 356 406 49 6 50 229 33 57 306 254 28 23 27 27 432 47 323 394 406 470 470 8 200 243 33 57 306 254 28 26 48 48 470 203 36 394 470 495 533 0 250 297 33 57 306 254 28 29 67 67 574 25 465 508 52 572 622 2 300 338 33 57 306 254 28 222 84 84 60 277 500 508 572 630 648 Flangeless Flanged ANSI Class 50 PN 0 ANSI Class 300 PN 6 M ANSI Class 400 PN 25 ANSI Class 600 PN 40 Weight (Kg) Valve size Actuator size Flangeless Flanged Class 50 208 Baker Hughes, a GE company. All rights reserved. Flanged Class 300 Flanged Class 600 in. DN Kg lbs. Kg lbs. Kg lbs. Kg lbs. 25 4.5 in. 7 38 8 4 20 45 20 45 /2 40 4.5 in. 9 43 22 50 24 54 25 55 2 50 4.5 in. 20 45 24 54 27 60 28 63 3 80 6 in. 46 03 52 6 57 29 59 33 4 00 6 in. 54 2 65 46 73 65 83 86 6 50 7 in. 03 232 5 259 3 295 56 35 8 200 7 in. 22 274 40 34 6 363 67 442 0 250 7 in. 78 400 203 456 236 53 2 300 7 in. 222 499 260 586 307 689 6 50 No.9 3 295 43 32 59 358 84 44 8 200 No.9 50 337 68 377 89 426 224 505 0 250 No.9 206 463 23 59 264 594 2 300 No.9 250 562 288 648 335 752 Specific Dimensions (millimeters) for the No.9 Actuator Valve size in. DN B C D E F G L 6 50 373 674 306 400 304 286 280 8 200 376 674 306 400 304 289 38 0 250 379 674 306 400 304 292 422 2 300 382 674 306 400 304 295 457 Masoneilan 35002 Series Camflex II Rotary Control Valves Tech Spec 5

DIRECT SALES OFFICE LOCATIONS AUSTRALIA Brisbane: Phone: +6-7-300-439 Fax: +6-7-300-4399 Perth: Phone: +6-8-6595-708 Fax: +6 8 6595-7299 Melbourne: Phone: +6-3-8807-6002 Fax : +6-3-8807-6577 BELGIUM Phone: +32-2-344-0970 Fax: +32-2-344-23 BRAZIL Phone: +55-9-204-6900 CHINA Phone: +86-0-5738-8888 Fax: +86-0-598-9707 FRANCE Courbevoie Phone: +33--4904-9000 Fax: +33--4904-900 GERMANY Ratingen Phone: +49-202-08-0 Fax: +49-202-08- INDIA Mumbai Phone: +9-22-8354790 Fax: +9-22-835479 New Delhi Phone: +9--2-66475 Fax: +9--5-659635 ITALY Phone: +39-08-7892- Fax: +39-08-7892-208 JAPAN Tokyo Phone: +8-03-687-9008 Fax: +8-03-6890-4620 KOREA Phone: +82-2-2274-0748 Fax: +82-2-2274-0794 MALAYSIA Phone: +60-3-26-0322 Fax: +60-3-263-632 MEXICO Phone: +52-55-3640-5060 THE NETHERLANDS Phone: +3-5-3808666 RUSSIA Veliky Novgorod Phone: +7-862-55-7898 Fax: +7-862-55-792 Moscow Phone: +7 495-585-276 Fax: +7 495-585-279 SAUDI ARABIA Phone: +966-3-34-0278 Fax: +966-3-34-7624 SINGAPORE Phone: +65-686-600 Fax: +65-686-772 SOUTH AFRICA Phone: +27--452-550 Fax: +27--452-6542 SOUTH & CENTRAL AMERICA AND THE CARIBBEAN Phone: +55-2-234-20 Fax: +55-2-234-238 SPAIN Phone: +34-93-652-6430 Fax: +34-93-652-6444 UNITED ARAB EMIRATES Phone: +97-4-899-777 Fax: +97-4-899-778 UNITED KINGDOM Bracknell Phone: +44-344-460-500 Fax: +44-344-460-537 Skelmersdale Phone: +44-695-526-00 Fax: +44-695-526-0 UNITED STATES Jacksonville, Florida Phone: +-904-570-3409 Deer Park, Texas Phone: +-28-884-000 Fax: +-28-884-00 Houston, Texas Phone: +-28-67-640 Fax: +-28-67-735 bhge.com *Denotes a trademark of Baker Hughes, a GE company, LLC. Other company names and product names used in this document are the registered trademarks or trademarks of their respective owners. 208 Baker Hughes, a GE company, LLC All rights reserved. BHGE reserves the right to make changes in specifications and features shown herein, or discontinue the product described at any time without notice or obligation. Contact your BHGE representative for the most current information. The BHGE logo is a trademark of Baker Hughes, a GE company, LLC. Baker Hughes, a GE company, the GE monogram, and Masoneilan are trademarks of the General Electric Company and Baker Hughes, a GE company, LLC. GEA9376C 0/208