Medium-Voltage Equipment Selection and Ordering Data Catalog HG 11.0 008 Answers for energy.
R-HG11-17.tif Siemens HG 11.0 008
Contents Contents Page SION Vacuum Circuit-Breakers Description General Construction and mode of operation, standards 5 6 7 1 Medium-Voltage Equipment Catalog HG 11.0 008 Ambient conditions, current carrying capacity and dielectric strength Product range overview and basic equipment 10 11 Invalid: PDF version of Catalog HG 11.0 006 Equipment Selection 13 Ordering data and configuration example 14 Selection of basic types, standard circuit-breakers 15 Secondary equipment for standard circuit-breakers 3 Selection of basic types, slide-in modules 8 Secondary equipment for slide-in modules 3 Accessories and spare parts 37 Technical Data Electrical data, dimensions and weights: Voltage levels 7. kv, 1 kv, 17.5 kv Voltage level 4 kv Operating times, short-circuit protection of motors, consumption data of releases Circuit diagrams 41 56 59 60 3 Annex Inquiry form Configuration instructions Configuration aid 61 6 63 Foldout page 4 Siemens HG 11.0 008 3
R-HG11-173.tif 4 Siemens HG 11.0 008
Description Contents Contents Description General Construction and mode of operation: Switching medium Pole assemblies Operating mechanism Trip-free mechanism Releases Closing / Circuit-breaker tripping signal Interlocking Low-voltage interface Slide-in module Page 5 6 7 7 7 7 8 8 8 8 9 1 Industrial application: Refinery R-HG11-174.tif Standards Maintenance-free design Ambient conditions 9 9 10 Current carrying capacity 10 Dielectric strength 10 Product range overview 11 Basic equipment 11 Siemens HG 11.0 008 5
Description General SION Vacuum Circuit-Breakers SION vacuum circuit-breaker from 7. to 4 kv The Innovative 1 SION vacuum circuit-breakers control all switching duties in medium-voltage distribution systems and are suitable for installation in all customary air-insulated medium-voltage switchgear types. They are applicable for operation of e.g. overhead lines, cables, transformers, generators, capacitors, filter circuits, motors and reactors. The comprehensive installation accessories enable easy integration in the panel and form maximally equipped as a slide-in module almost the complete circuit-breaker compartment. SION standard circuit-breaker the Variable SION slide-in module the Complete R-HG11-167.eps R-HG11-168.eps Our comprehensive range of standard circuit-breakers offers a wide selection for pole-center distances and widths across flats as well as various installation accessory packages for voltage levels from 7. to 4 kv. The drawout element, contact arms, contact systems and bushings enable easy integration in all customary medium-voltage switchgear types. Identical dimensions and connection dimensions across several voltage levels reduce planning costs and the diversity of panel versions. High reliability and availability are just as much a matter of course as 10,000 maintenancefree operating cycles. The slide-in module contains all components required for the circuit-breaker compartment of a panel. It consists of the circuit-breaker on a drawout element with contact arms, fitted in a cartridge with side and rear walls. The module is equipped with bushings, fixed contacts, shutters and the shutter mechanism. The surfaces of the side and rear walls form the tested connection compartment. 6 Siemens HG 11.0 008
Description Construction and mode of operation Switching medium The vacuum switching technology, proven and fully developed for more than 30 years, serves as arc-quenching principle by using vacuum interrupters. Pole assemblies The pole assemblies consist of the vacuum interrupters and the pole shells. The vacuum interrupters are air-insulated and freely accessible. The pole assemblies are fixed on the mounting plate of the operating mechanism and supported by means of the pole shell. The vacuum interrupter (3) is mounted rigidly to the upper interrupter support. The lower part of the interrupter is guided in the lower interrupter support, allowing axial movement. The pole shell (4) absorbs the external forces resulting from switching operations and the contact pressure. Operating mechanism The whole operating mechanism is mounted on its mounting plate, including the motor, releases, indicators and actuating devices. Stored-energy operating mechanism The operating mechanism is a stored-energy spring mechanism. The force is transmitted from the operating mechanism to the pole assemblies via operating levers. The closing spring can be charged either electrically or manually and latches automatically in when charging is complete. The closing spring acts as a stored-energy mechanism. HG11-500 eps R-HG11-170.eps 1 3 4 5 6 Vacuum circuit-breaker 3AE1 17.5 kv / 5 ka / 150 A 1 Separating shell to the operating mechanism Upper connection 3 Interrupter 4 Pole shell 5 Lower connection 6 Bell-type insulator Pole structure 1 To close the breaker, the closing spring can be unlatched either mechanically by means of the local ON pushbutton or electrically by remote control. The closing spring charges the contact-pressure / opening springs as the breaker closes. The now discharged closing spring will be charged again automatically by the mechanism motor. The breaker is now capable of performing the OPEN CLOSE OPEN operating sequence that is required for an unsuccessful auto-reclosing operation on the system side. All storedenergy mechanisms perform the switching duties of synchronizing and rapid load transfer as well as auto-reclosing. HG11-501 eps 1 1 Cover of low-voltage interface Central control board Front view Trip-free mechanism SION vacuum circuit-breakers have a trip-free mechanism according to IEC 671-100. In the event of an opening command being given after a closing operation has been initiated, the moving contacts return to the open position and remain there even if the closing command is sustained. This means that the contacts of the vacuum circuit-breakers are momentarily in the closed position, which is permissible according to IEC 671-100. The motors for charging the closing spring operate in short-time duty. Therefore the voltage and power consumption might differ from the data of the rating plate. 1 HG11-50 eps 3 4 5 6 7 1 Auxiliary switch 1 st release 3 Terminal strip 4 Motor 5 Closing solenoid 6 Closing spring 7 Gear Operating mechanism without cover Siemens HG 11.0 008 7
Description Construction and mode of operation SION Vacuum Circuit-Breakers 1 Releases A release is a device which transfers electrical commands from an external source, such as a control room, to the latching mechanism of the vacuum circuit-breaker so that it can be opened or closed. The releases are designed for short-time duty up to 1 minute and are reset internally. The various types of releases available are described in detail below: The closing solenoid unlatches the charged closing spring of the vacuum circuit-breaker, closing it by electrical means. Shunt releases are used for automatic tripping of vacuum circuit-breakers by suitable protection relays and for deliberate tripping by electrical means. They are intended for connection to an external power supply (DC or AC voltage) but, in special cases, may also be connected to a voltage transformer for manual operation. Current-transformer operated releases comprise a stored-energy mechanism, an unlatching mechanism, and an electromagnetic system. They are used when there is no external source of auxiliary power (e.g. a battery). Tripping is effected by means of a protection relay (e.g. overcurrenttime protection) acting on the current-transformer operated release. Undervoltage releases comprise a stored-energy mechanism, an unlatching mechanism and an electromagnetic system which is permanently connected to the secondary or auxiliary voltage while the vacuum circuit-breaker is closed. If the voltage falls below a predetermined value, unlatching of the release is enabled and the circuit-breaker is opened via the stored-energy mechanism. The maximum equipment are freely selected releases. For release combinations, refer to page 3 or page 3. For consumption data, refer to page 59. Closing / Circuit-breaker tripping signal In the standard version, the vacuum circuit-breakers can be remote-closed electrically. In addition, they can be mechanically closed locally by direct unlatching of the closing spring. If constant CLOSE and OPEN commands are present at the vacuum circuit-breaker at the same time, the vacuum circuitbreaker will return to the open position after closing. It remains in this position until a new CLOSE command is given. In this manner, continuous closing and opening (= pumping ) is prevented. The charging status of the closing spring in the vacuum circuit-breaker can be interrogated electrically by means of the position switch. During electrical opening, the NO contact S6 makes brief contact. This is often used to operate a hazard warning system which should respond to automatic tripping of the circuit-breaker. In case of local control, the NO contact S6 does not close. For the corresponding circuit diagrams, refer to page 60. Interlocking Mechanical interlocking At the interface of the mechanical interlocking of the vacuum circuit-breaker, sensors on the switchgear side can check the switch position and prevent the associated disconnector from being closed while the vacuum circuitbreaker is closed. The system also prevents the vacuum circuit-breaker from being closed while the associated disconnector is in a faulty position. Vacuum circuit-breakers mounted on drawout elements are mechanically interlocked, with the result that the handle for racking the drawout element can only be inserted in the OPEN position. The lock of the drawout element can only be released in the disconnected position by operating the pushing handles. If the vacuum circuit-breaker on the drawout element is in an intermediate position (neither in the service nor in the disconnected position), operation is not possible due to the mechanical interlocking. Electrical interlocking The auxiliary and signaling contacts which show the switch position of the vacuum circuit-breaker or the position of the drawout element can be integrated in the switchgear interlocking concept in order to exclude impermissible switching sequences. Low-voltage interface The separate cover enables easy access to the low-voltage interface. All possible customer-side control and signaling connections are concentrated here. 8 Siemens HG 11.0 008
Description Construction and mode of operation, standards Slide-in module Besides the circuit-breaker installation equipment available for standard circuit-breakers by means of the packages for the drawout element, contact arms, fixed contacts and bushings, it is also possible to supply a complete slide-in module. The slide-in module contains all necessary components for the circuit-breaker compartment of a panel. It consists of the circuit-breaker on a drawout element with contact arms, mounted in a cartridge with side and rear walls, equipped with bushings, fixed contacts, shutters and shutter mechanism. The surfaces of the side and rear walls form the tested connection compartment. The vacuum circuit-breaker on the drawout element is racked into the cartridge with the associated handle by the rotary movement of the spindle. The shutter mechanism is controlled by lateral gates, and the shutters are opened for contacting. Signals for the service and disconnected positions are transmitted to the module connector at the low-voltage interface of the vacuum circuit-breaker via the position switches of the drawout element. Standards The vacuum circuit-breakers conform to the following standards: IEC 671-1 (former IEC 60694) IEC 671-100 (former IEC 60056) All SION vacuum circuit-breakers fulfil the endurance classes E, M and C according to IEC 671-100. The slide-in modules have been tested according to IEC 671-00 regarding Dielectric strength Temperature rise Switching capacity. Slide-in module 1 Contact system Fixed contact 3 Shutter 4 Bushing 5 Cartridge 6 Contact arm 7 Low-voltage interface 8 Vacuum circuit-breaker 9 Drawout element R-HG11-171.eps 1 Maintenance-free design SION vacuum circuit-breakers are maintenance-free: Under normal ambient conditions according to IEC 671-1 (former IEC 60694) Up to 10,000 operating cycles, no regreasing no readjusting, the ratings are independent within their tolerances of the switching rate or standing times without switching. Siemens HG 11.0 008 9
Description Ambient conditions, current carrying capacity and dielectric strength SION Vacuum Circuit-Breakers Ambient conditions 1 40 C -5 C max. 95% per day max. 90% per month The vacuum circuit-breakers are designed for the normal operating conditions defined in IEC 671-100. Condensation can occasionally occur under the ambient conditions shown opposite. SION vacuum circuit-breakers are suitable for use in the following climatic classes according to IEC 6071, Part 3-3: Climatic ambient conditions: Class 3K4 1) Biological ambient conditions: Class 3B1 Mechanical ambient conditions: Class 3M Chemically-active substances: Class 3C ) HG11-515_en eps Mechanically-active substances: Class 3S 3) 1) Low temperature limit: 5 C ) Without icing and wind-driven precipitation 3) Restriction: Clean insulation parts Current carrying capacity Rated normal current Altitude correction factor 3400 A 3000 600 00 1800 1400 1000 600 10 1.50 1.40 1.30 1.0 0 4 3 1 30 40 50 60 C 70 Ambient air temperature 5 HG11-516a_en eps The rated normal currents specified in the diagram have been defined according to IEC 671-100 for an ambient air temperature of + 40 C and apply to open switchgear. For enclosed switchgear the data of the switchgear manufacturer applies. At ambient air temperatures below + 40 C, higher normal currents can be carried (see diagram): Characteristics curve 1 = Rated normal current 800 A Characteristics curve = Rated normal current 150 A Characteristics curve 3 = Rated normal current 000 A Characteristics curve 4 = Rated normal current 500 A Characteristics curve 5 = Rated normal current 3150 A Dielectric strength The dielectric strength of air insulation decreases with increasing altitude due to low air density. According to IEC 671-1, the values of the rated lightning impulse and the rated short-duration powerfrequency specified in the chapter Technical Data apply to a site altitude of 1000 m above sea level. For an altitude above 1000 m, the insulation level must be corrected according to the opposite diagram. The characteristic shown applies to both rated withstand voltages. To select the devices, the following applies: 1.10 1.00 1000 1500 000 500 HG11-517c_en eps 3000 3500 m 4000 Site altitude U W U 0 x K a U U 0 K a Rated under reference atmosphere Rated requested for the place of installation Altitude correction factor according to the opposite diagram Example For a requested rated lightning impulse of 75 kv at an altitude of 500 m, an insulation level of 90 kv under reference atmosphere is required as a minimum: 90 kv W 75 kv x 1. 10 Siemens HG 11.0 008
Description Product range overview and basic equipment Product range overview Rated voltage Rated shortcircuit breaking current Rated normal current Pole-center distance (in mm) 150 160 10 75 Width across flats (in mm) Type kv ka A 05 75 310 05 75 310 05 75 310 310 3AE10 7. 16 800/150 0 800/150 5 800/150 5 000 31.5 800/150 31.5 000/500 40 1000 40 500/3150 3AE11 1 16 800/150 0 800/150 5 800/150 5 000/500 31.5 800/150 31.5 000/500 40 1000 40 500/3150 3AE1 17.5 1.5 800/150 16 800/150 5 800/150 5 000/500 31.5 800/150 31.5 000/500 40 1000 40 500/3150 3AE13 4 1.5 800/150 16 800/1000 0 800/150 0 000/500 5 800/150 5 000/500 1 Basic equipment Standard circuit-breaker (fixed-mounted/drawout version with installation accessories) Slide-in module Features Minimum equipment Alternative equipment Remarks Operating mechanism Electricaloperatingmechanism None Also for manual operation Closing Closing solenoid and None mechanical manual closing 1 st release Shunt release Undervoltage release, c.t.-operated release nd release Without Shunt release, undervoltage release, c.t.-operated release Varistor circuit Installed with W 60 V DC None For limiting switching overvoltages Auxiliary switch 6 NO + 6 NC 1 NO + 1 NC Plug connection 7-pole terminal strip 4-pole plug, 64-pole plug 1 NO + 1 NC not available with 4-pole plug Anti-pumping Available None Circuit-breaker tripping Without Possible signal Operations counter Available None Position switches 1 NO + 1 NC None Mechanical interlocking Available for slide-in module Mechanical interlocking for circuit-breaker Required for slide-in module Installation accessories Fixed-mounted With drawout element, contact arms, contact system, with fixed contacts and bushings, complete slide-in module Siemens HG 11.0 008 11
R-HG11-175.tif 1 Siemens HG 11.0 008
Equipment Selection Contents Contents Equipment Selection Ordering data and configuration example Page 13 14 Selection of basic types, standard circuit-breakers: Voltage level 7. kv Voltage level 1 kv Voltage level 17.5 kv Voltage level 4 kv Secondary equipment for standard circuit-breakers Additional equipment for standard circuit-breakers 15 17 0 3 7 Selection of basic types, slide-in modules: Standard circuit-breaker R-HG11-176.eps Voltage level 7. kv Voltage level 1 kv Voltage level 17.5 kv Voltage level 4 kv 8 9 30 31 Secondary equipment for slide-in modules 3 Additional equipment for slide-in modules 36 Accessories and spare parts 37 R-HG11-168.eps Slide-in module Siemens HG 11.0 008 13
Equipment Selection Ordering data and configuration example SION Vacuum Circuit-Breakers Order number structure The SION vacuum circuit-breakers consist of a primary and a secondary part. The relevant data make up the 16-digit order number. The primary part covers the main electrical data of the circuit-breaker poles. The secondary part covers the auxiliary devices which are necessary for operating and controlling the vacuum circuit-breaker. Order codes Individual equipment versions, marked with 9 or Z in the 9 th to 16 th position, are explained more in detail by a 3-digit order code. Several order codes can be added to the order number in succession and in any sequence. Special versions ( ) In case of special versions, -Z is added to the order number and a descriptive order code follows. If several special versions are required, the suffix -Z is listed only once. If a requested special version is not in the catalog and can therefore not be ordered via order code, it has to be identified with Y 9 9 after consultation. The agreement hereto is made directly between your responsible sales partner and the order processing department in the Switchgear Factory Berlin. Primary part 1 st position Superior group Switching devices nd position Main group Circuit-breaker 3 rd position Subgroup Circuit-breaker type series 4 th to 8 th position Basic equipment Design and ratings primary part a: alphabetical n: numerical Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes Order No.: 3 A E n n n n n a a n n n a a n Secondary part 9 th to 16 th position Secondary equipment Operating mechanism, releases, operating voltages and further auxiliary equipment Order codes Groupof3aftertheOrderNo. Format: a n a Special versions ( ) Initiated with -Z Groupof3aftertheOrderNo. Format: a n n Configuration example In order to simplify the selection of the correct order number for the requested circuit-breaker type, you will find a configuration example on each page of the chapter Equipment Selection. For the selection of the secondary part, always the last example of the primary part was taken over and continued, so that at the end of the equipment selection (pages 7 and 36) a completely configured circuit-breaker results as an example. On the foldout page we offer a configuring aid. Here you can fill in the order number you have determined for your circuit-breaker. Example for Order No.: 3 A E 1 0 8 3 Order codes: 14 Siemens HG 11.0 008
Equipment Selection Selection of basic types, standard circuit-breakers 7. kv Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes 60 Hz Order No.: 3 A E 1 Rated voltage Rated lightning impulse Rated short-duration power-frequency Rated short-circuit breaking current at 36 % DC component Rated short-circuit making current (at 60 Hz) Pole-center distance Width across flats Rated normal current Seepage3 Seepage3 Seepage4 Seepage4 Seepage5 Seepage5 Seepage6 Seepage6 Seepage7 U r U p U d I sc I ma I r kv kv kv ka ka mm mm A 7. 60 0 16 10 310 800 3 A E 1 0 8 1 310 150 3 A E 1 0 8 75 800 3 A E 1 0 7 1 75 150 3 A E 1 0 7 05 800 3 A E 1 0 6 1 05 150 3 A E 1 0 6 160 310 800 3 A E 1 0 5 1 310 150 3 A E 1 0 5 75 800 3 A E 1 0 4 1 75 150 3 A E 1 0 4 05 800 3 A E 1 0 3 1 05 150 3 A E 1 0 3 150 310 800 3 A E 1 0 1 310 150 3 A E 1 0 75 800 3 A E 1 0 1 1 75 150 3 A E 1 0 1 05 800 3 A E 1 0 0 1 05 150 3 A E 1 0 0 7. 60 0 0 10 310 800 3 A E 1 0 8 3 1 310 150 3 A E 1 0 8 3 75 800 3 A E 1 0 7 3 1 75 150 3 A E 1 0 7 3 05 800 3 A E 1 0 6 3 1 05 150 3 A E 1 0 6 3 160 310 800 3 A E 1 0 5 3 1 310 150 3 A E 1 0 5 3 75 800 3 A E 1 0 4 3 1 75 150 3 A E 1 0 4 3 05 800 3 A E 1 0 3 3 1 05 150 3 A E 1 0 3 3 150 310 800 3 A E 1 0 3 1 310 150 3 A E 1 0 3 75 800 3 A E 1 0 1 3 1 75 150 3 A E 1 0 1 3 05 800 3 A E 1 0 0 3 1 05 150 3 A E 1 0 0 3 Configuration example SION vacuum circuit-breaker 3 A E 1 Rated voltage U r =7.kV, 60 Hz Rated lightning impulse U p =60kV Rated short-circuit breaking current I sc =0kA Rated normal current I r = 150 A Pole-center distance = 10 mm, width across flats = 310 mm 0 8 3 Example for Order No.: 3 A E 1 0 8 3 Order codes: Siemens HG 11.0 008 15
Equipment Selection Selection of basic types, standard circuit-breakers SION Vacuum Circuit-Breakers 7. kv Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes 60 Hz Order No.: 3 A E 1 Rated voltage Rated lightning impulse Rated short-duration power-frequency Rated short-circuit breaking current at 36 % DC component Rated short-circuit making current (at 60 Hz) Pole-center distance Width across flats Rated normal current Seepage3 Seepage3 Seepage4 Seepage4 Seepage5 Seepage5 Seepage6 Seepage6 Seepage7 U r U p U d I sc I ma I r kv kv kv ka ka mm mm A 7. 60 0 5 10 310 800 3 A E 1 0 8 4 1 310 150 3 A E 1 0 8 4 310 000 3 A E 1 0 8 4 4 75 800 3 A E 1 0 7 4 1 75 150 3 A E 1 0 7 4 05 800 3 A E 1 0 6 4 1 05 150 3 A E 1 0 6 4 160 310 800 3 A E 1 0 5 4 1 310 150 3 A E 1 0 5 4 75 800 3 A E 1 0 4 4 1 75 150 3 A E 1 0 4 4 05 800 3 A E 1 0 3 4 1 05 150 3 A E 1 0 3 4 150 310 800 3 A E 1 0 4 1 310 150 3 A E 1 0 4 75 800 3 A E 1 0 1 4 1 75 150 3 A E 1 0 1 4 05 800 3 A E 1 0 0 4 1 05 150 3 A E 1 0 0 4 7. 60 0 31.5 10 310 800 3 A E 1 0 8 5 1 310 150 3 A E 1 0 8 5 310 000 3 A E 1 0 8 5 4 310 500 3 A E 1 0 8 5 6 75 800 3 A E 1 0 7 5 1 75 150 3 A E 1 0 7 5 05 800 3 A E 1 0 6 5 1 05 150 3 A E 1 0 6 5 160 310 800 3 A E 1 0 5 5 1 310 150 3 A E 1 0 5 5 75 800 3 A E 1 0 4 5 1 75 150 3 A E 1 0 4 5 05 800 3 A E 1 0 3 5 1 05 150 3 A E 1 0 3 5 150 310 800 3 A E 1 0 5 1 310 150 3 A E 1 0 5 75 800 3 A E 1 0 1 5 1 75 150 3 A E 1 0 1 5 05 800 3 A E 1 0 0 5 1 05 150 3 A E 1 0 0 5 7. 60 0 40 100/104 10 310 150 3 A E 1 0 8 6 310 000 3 A E 1 0 8 6 4 310 500 3 A E 1 0 8 6 6 310 3150 3 A E 1 0 8 6 7 Configuration example SION vacuum circuit-breaker 3 A E 1 Rated voltage U r =7.kV, 60 Hz Rated lightning impulse U p =60kV Rated short-circuit breaking current I sc =40kA Rated normal current I r = 000 A Pole-center distance = 10 mm, width across flats = 310 mm 0 8 6 4 Example for Order No.: 3 A E 1 0 8 6 4 Order codes: 16 Siemens HG 11.0 008
Equipment Selection Selection of basic types, standard circuit-breakers 1 kv Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes 60 Hz Order No.: 3 A E 1 Rated voltage Rated lightning impulse Rated short-duration power-frequency Rated short-circuit breaking current at 36 % DC component Rated short-circuit making current (at 60 Hz) Pole-center distance Width across flats Rated normal current Seepage3 Seepage3 Seepage4 Seepage4 Seepage5 Seepage5 Seepage6 Seepage6 Seepage7 U r U p U d I sc I ma I r kv kv kv ka ka mm mm A 1 75 8 16 10 310 800 3 A E 1 1 8 1 310 150 3 A E 1 1 8 75 800 3 A E 1 1 7 1 75 150 3 A E 1 1 7 05 800 3 A E 1 1 6 1 05 150 3 A E 1 1 6 160 310 800 3 A E 1 1 5 1 310 150 3 A E 1 1 5 75 800 3 A E 1 1 4 1 75 150 3 A E 1 1 4 05 800 3 A E 1 1 3 1 05 150 3 A E 1 1 3 150 310 800 3 A E 1 1 1 310 150 3 A E 1 1 75 800 3 A E 1 1 1 1 75 150 3 A E 1 1 1 05 800 3 A E 1 1 0 1 05 150 3 A E 1 1 0 1 75 8 0 10 310 800 3 A E 1 1 8 3 1 310 150 3 A E 1 1 8 3 75 800 3 A E 1 1 7 3 1 75 150 3 A E 1 1 7 3 05 800 3 A E 1 1 6 3 1 05 150 3 A E 1 1 6 3 160 310 800 3 A E 1 1 5 3 1 310 150 3 A E 1 1 5 3 75 800 3 A E 1 1 4 3 1 75 150 3 A E 1 1 4 3 05 800 3 A E 1 1 3 3 1 05 150 3 A E 1 1 3 3 150 310 800 3 A E 1 1 3 1 310 150 3 A E 1 1 3 75 800 3 A E 1 1 1 3 1 75 150 3 A E 1 1 1 3 05 800 3 A E 1 1 0 3 1 05 150 3 A E 1 1 0 3 Special version (available for all 1 kv standard circuit-breakers) U d =kv Z E 1 3 Configuration example SION vacuum circuit-breaker 3 A E 1 Rated voltage U r =1kV, 60 Hz Rated lightning impulse U p =75kV Rated short-circuit breaking current I sc =16kA Rated normal current I r = 800 A Pole-center distance = 160 mm, width across flats = 75 mm 1 4 1 Rated short-duration power-frequency U d =kv Z E 1 3 Example for Order No.: 3 A E 1 1 4 1 Z Order codes: E 1 3 Siemens HG 11.0 008 17
Equipment Selection Selection of basic types, standard circuit-breakers SION Vacuum Circuit-Breakers 1 kv Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes 60 Hz Order No.: 3 A E 1 Rated voltage Rated lightning impulse Rated short-duration power-frequency Rated short-circuit breaking current at 36 % DC component Rated short-circuit making current (at 60 Hz) Pole-center distance Width across flats Rated normal current Seepage3 Seepage3 Seepage4 Seepage4 Seepage5 Seepage5 Seepage6 Seepage6 Seepage7 U r U p U d I sc I ma I r kv kv kv ka ka mm mm A 1 75 8 5 10 310 800 3 A E 1 1 8 4 1 310 150 3 A E 1 1 8 4 310 000 3 A E 1 1 8 4 4 310 500 3 A E 1 1 8 4 6 75 800 3 A E 1 1 7 4 1 75 150 3 A E 1 1 7 4 05 800 3 A E 1 1 6 4 1 05 150 3 A E 1 1 6 4 160 310 800 3 A E 1 1 5 4 1 310 150 3 A E 1 1 5 4 75 800 3 A E 1 1 4 4 1 75 150 3 A E 1 1 4 4 05 800 3 A E 1 1 3 4 1 05 150 3 A E 1 1 3 4 150 310 800 3 A E 1 1 4 1 310 150 3 A E 1 1 4 75 800 3 A E 1 1 1 4 1 75 150 3 A E 1 1 1 4 05 800 3 A E 1 1 0 4 1 05 150 3 A E 1 1 0 4 1 75 8 31.5 10 310 800 3 A E 1 1 8 5 1 310 150 3 A E 1 1 8 5 310 000 3 A E 1 1 8 5 4 310 500 3 A E 1 1 8 5 6 75 800 3 A E 1 1 7 5 1 75 150 3 A E 1 1 7 5 05 800 3 A E 1 1 6 5 1 05 150 3 A E 1 1 6 5 160 310 800 3 A E 1 1 5 5 1 310 150 3 A E 1 1 5 5 75 800 3 A E 1 1 4 5 1 75 150 3 A E 1 1 4 5 05 800 3 A E 1 1 3 5 1 05 150 3 A E 1 1 3 5 150 310 800 3 A E 1 1 5 1 310 150 3 A E 1 1 5 75 800 3 A E 1 1 1 5 1 75 150 3 A E 1 1 1 5 05 800 3 A E 1 1 0 5 1 05 150 3 A E 1 1 0 5 Special version (available for all 1 kv standard circuit-breakers) U d =kv Z E 1 3 Configuration example SION vacuum circuit-breaker 3 A E 1 Rated voltage U r =1kV, 60 Hz Rated lightning impulse U p =75kV Rated short-circuit breaking current I sc = 31.5 ka Rated normal current I r = 150 A Pole-center distance = 150 mm, width across flats = 05 mm 1 0 5 18 Siemens HG 11.0 008 Example for Order No.: 3 A E 1 1 0 5 Order codes:
Equipment Selection Selection of basic types, standard circuit-breakers 1 kv Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes 60 Hz Order No.: 3 A E 1 Rated voltage Rated lightning impulse Rated short-duration power-frequency Rated short-circuit breaking current at 36 % DC component Rated short-circuit making current (at 60 Hz) Pole-center distance Width across flats Rated normal current Seepage3 Seepage3 Seepage4 Seepage4 Seepage5 Seepage5 Seepage6 Seepage6 Seepage7 U r U p U d I sc I ma I r kv kv kv ka ka mm mm A 1 75 8 40 100/104 10 310 150 3 A E 1 1 8 6 310 000 3 A E 1 1 8 6 4 310 500 3 A E 1 1 8 6 6 310 3150 3 A E 1 1 8 6 7 Special version (available for all 1 kv standard circuit-breakers) U d =kv Z E 1 3 Circuit-breaker for installation in NXAIR 1 75 8 31.5 10 75 150 3 A E 1 5 7 5 75 500 3 A E 1 5 7 5 6 160 75 150 3 A E 1 5 4 5 1 75 8 40 100/104 10 75 150 3 A E 1 5 7 6 75 000 3 A E 1 5 7 6 4 75 500 3 A E 1 5 7 6 6 75 3150 3 A E 1 5 7 6 7 Special version (available for all 1 kv standard circuit-breakers) U d =kv Z E 1 3 Configuration example SION vacuum circuit-breaker 3 A E 1 Rated voltage U r =1kV, 60 Hz Rated lightning impulse U p =75kV Rated short-circuit breaking current I sc =40kA Rated normal current I r = 150 A Pole-center distance = 10 mm, width across flats = 310 mm 1 8 6 Example for Order No.: 3 A E 1 1 8 6 Order codes: Siemens HG 11.0 008 19
Equipment Selection Selection of basic types, standard circuit-breakers SION Vacuum Circuit-Breakers 17.5 kv Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes 60 Hz Order No.: 3 A E 1 Rated voltage Rated lightning impulse Rated short-duration power-frequency Rated short-circuit breaking current at 36 % DC component Rated short-circuit making current (at 60 Hz) Pole-center distance Width across flats Rated normal current Seepage3 Seepage3 Seepage4 Seepage4 Seepage5 Seepage5 Seepage6 Seepage6 Seepage7 U r U p U d I sc I ma I r kv kv kv ka ka mm mm A 17.5 95 38 1.5 31/33 10 310 800 3 A E 1 8 1 1 310 150 3 A E 1 8 1 75 800 3 A E 1 7 1 1 75 150 3 A E 1 7 1 05 800 3 A E 1 6 1 1 05 150 3 A E 1 6 1 160 310 800 3 A E 1 5 1 1 310 150 3 A E 1 5 1 75 800 3 A E 1 4 1 1 75 150 3 A E 1 4 1 05 800 3 A E 1 3 1 1 05 150 3 A E 1 3 1 150 310 800 3 A E 1 1 1 310 150 3 A E 1 1 75 800 3 A E 1 1 1 1 75 150 3 A E 1 1 1 05 800 3 A E 1 0 1 1 05 150 3 A E 1 0 1 17.5 95 38 16 10 310 800 3 A E 1 8 1 310 150 3 A E 1 8 75 800 3 A E 1 7 1 75 150 3 A E 1 7 05 800 3 A E 1 6 1 05 150 3 A E 1 6 160 310 800 3 A E 1 5 1 310 150 3 A E 1 5 75 800 3 A E 1 4 1 75 150 3 A E 1 4 05 800 3 A E 1 3 1 05 150 3 A E 1 3 150 310 800 3 A E 1 1 310 150 3 A E 1 75 800 3 A E 1 1 1 75 150 3 A E 1 1 05 800 3 A E 1 0 1 05 150 3 A E 1 0 17.5 95 38 5 10 310 800 3 A E 1 8 4 1 310 150 3 A E 1 8 4 310 000 3 A E 1 8 4 4 310 500 3 A E 1 8 4 6 Configuration example SION vacuum circuit-breaker 3 A E 1 Rated voltage U r = 17.5 kv, 60 Hz Rated lightning impulse U p =95kV Rated short-circuit breaking current I sc =16kA Rated normal current I r = 150 A Pole-center distance = 10 mm, width across flats = 75 mm 7 0 Siemens HG 11.0 008 Example for Order No.: 3 A E 1 7 Order codes:
Equipment Selection Selection of basic types, standard circuit-breakers 17.5 kv Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes 60 Hz Order No.: 3 A E 1 Rated voltage Rated lightning impulse Rated short-duration power-frequency Rated short-circuit breaking current at 36 % DC component Rated short-circuit making current (at 60 Hz) Pole-center distance Width across flats Rated normal current Seepage3 Seepage3 Seepage4 Seepage4 Seepage5 Seepage5 Seepage6 Seepage6 Seepage7 U r U p U d I sc I ma I r kv kv kv ka ka mm mm A 17.5 95 38 5 10 75 800 3 A E 1 7 4 1 75 150 3 A E 1 7 4 05 800 3 A E 1 6 4 1 05 150 3 A E 1 6 4 160 310 800 3 A E 1 5 4 1 310 150 3 A E 1 5 4 75 800 3 A E 1 4 4 1 75 150 3 A E 1 4 4 05 800 3 A E 1 3 4 1 05 150 3 A E 1 3 4 150 310 800 3 A E 1 4 1 310 150 3 A E 1 4 75 800 3 A E 1 1 4 1 75 150 3 A E 1 1 4 05 800 3 A E 1 0 4 1 05 150 3 A E 1 0 4 17.5 95 38 31.5 10 310 800 3 A E 1 8 5 1 310 150 3 A E 1 8 5 310 000 3 A E 1 8 5 4 310 500 3 A E 1 8 5 6 75 800 3 A E 1 7 5 1 75 150 3 A E 1 7 5 05 800 3 A E 1 6 5 1 05 150 3 A E 1 6 5 160 310 800 3 A E 1 5 5 1 310 150 3 A E 1 5 5 75 800 3 A E 1 4 5 1 75 150 3 A E 1 4 5 05 800 3 A E 1 3 5 1 05 150 3 A E 1 3 5 150 310 800 3 A E 1 5 1 310 150 3 A E 1 5 75 800 3 A E 1 1 5 1 75 150 3 A E 1 1 5 05 800 3 A E 1 0 5 1 05 150 3 A E 1 0 5 17.5 95 38 40 100/104 10 310 150 3 A E 1 8 6 310 000 3 A E 1 8 6 4 310 500 3 A E 1 8 6 6 310 3150 3 A E 1 8 6 7 Configuration example SION vacuum circuit-breaker 3 A E 1 Rated voltage U r = 17.5 kv, 60 Hz Rated lightning impulse U p =95kV Rated short-circuit breaking current I sc = 31.5 ka Rated normal current I r = 500 A Pole-center distance = 10 mm, width across flats = 310 mm 8 5 6 Example for Order No.: 3 A E 1 8 5 6 Order codes: Siemens HG 11.0 008 1
Equipment Selection Selection of basic types, standard circuit-breakers SION Vacuum Circuit-Breakers 4 kv Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes 60 Hz Order No.: 3 A E 1 Rated voltage Rated lightning impulse Rated short-duration power-frequency Rated short-circuit breaking current at 36 % DC component Rated short-circuit making current (at 60 Hz) Pole-center distance Width across flats Rated normal current Seepage3 Seepage3 Seepage4 Seepage4 Seepage5 Seepage5 Seepage6 Seepage6 Seepage7 U r U p U d I sc I ma I r kv kv kv ka ka mm mm A 4 15 50 1.5 31/33 10 310 800 3 A E 1 3 1 1 310 150 3 A E 1 3 1 4 15 50 16 10 310 800 3 A E 1 3 1 310 150 3 A E 1 3 310 000 3 A E 1 3 4 75 310 800 3 A E 1 3 5 1 310 150 3 A E 1 3 5 310 000 3 A E 1 3 5 4 4 15 50 0 10 310 800 3 A E 1 3 3 1 310 150 3 A E 1 3 3 310 000 3 A E 1 3 3 4 310 500 3 A E 1 3 3 6 75 310 800 3 A E 1 3 5 3 1 310 150 3 A E 1 3 5 3 310 000 3 A E 1 3 5 3 4 310 500 3 A E 1 3 5 3 6 4 15 50 5 10 310 800 3 A E 1 3 4 1 310 150 3 A E 1 3 4 310 000 3 A E 1 3 4 4 310 500 3 A E 1 3 4 6 75 310 800 3 A E 1 3 5 4 1 310 150 3 A E 1 3 5 4 310 000 3 A E 1 3 5 4 4 310 500 3 A E 1 3 5 4 6 Special versions (available for all 4 kv standard circuit-breakers) U d =55kV U d =kv Z E 5 5 Z E 6 5 Circuit-breaker for installation in NXAIR 4 15 50 5 10 30 150 3 A E 1 7 4 30 000 3 A E 1 7 4 4 30 500 3 A E 1 7 4 6 75 30 500 3 A E 1 7 5 4 6 Special versions (available for all 4 kv standard circuit-breakers) U d =55kV U d =kv Z E 5 5 Z E 6 5 Configuration example SION vacuum circuit-breaker 3 A E 1 Rated voltage U r =4kV, 60 Hz Rated lightning impulse U p = 15 kv Rated short-circuit breaking current I sc =5kA Rated normal current I r = 000 A Pole-center distance = 75 mm, width across flats = 310 mm 3 5 4 4 Example for Order No.: 3 A E 1 3 5 4 4 Order codes: Siemens HG 11.0 008
Equipment Selection Secondary equipment for standard circuit-breakers 9 th position Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes Release combination Order No.: 3 A E 1 1 st shunt release nd shunt release Undervoltage release C.t.-operated release 0.5 A C.t.-operated release 1.0 A C.t.-operated release with tripping pulse W 0.1 Ws (0 O) Seepage4 Seepage4 Seepage5 Seepage5 Seepage6 Seepage6 Seepage7 A B C G H F E N P Q J L M 10 th position Operating voltage of the closing solenoid Standard voltages Special voltages 4 V DC B 48 V DC C 60 V DC D 110 V DC E 0 V DC F 100 V AC 60 Hz 1) H 110 V AC 60 Hz 1) J 30 V AC 60 Hz 1) K 30 V DC M 3 V DC N V DC P 15 V DC Q 17 V DC R 40 V DC S V AC 60 Hz 1) U 15 V AC 60 Hz 1) V 40 V AC 60 Hz 1) W 1) The AC frequency 50 or 60 Hz is selected at the 16 th position of the ordernumbertogetherwiththelanguage(seepage6) Configuration example SION vacuum circuit-breaker 3 A E 1 (U r =4kV, 60 Hz, U p = 15 kv, I sc =5kA, I r = 000 A, pole-center distance = 75 mm, width across flats = 310 mm) 3 5 4 4 1 st shunt release A Operating voltage of the closing solenoid 48 V DC C Example for Order No.: 3 A E 1 3 5 4 4 A C Order codes: Siemens HG 11.0 008 3
Equipment Selection Secondary equipment for standard circuit-breakers SION Vacuum Circuit-Breakers 11 th position Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes Operating voltage of the 1 st release Order No.: 3 A E 1 Standard voltages Special voltages Seepage5 Seepage5 Seepage6 Seepage6 Seepage7 C.t.-operated release 0 4 V DC 1 48 V DC 60 V DC 3 110 V DC 4 0 V DC 5 100 V AC 60 Hz 1) 6 110 V AC 60 Hz 1) 7 30 V AC 60 Hz 1) 8 30 V DC 9 With order code L 1 A 3 V DC 9 With order code L 1 B V DC 9 With order code L 1 C 15 V DC 9 With order code L 1 D 17 V DC 9 With order code L 1 E 40 V DC 9 With order code L 1 F V AC 60 Hz 1) 9 With order code L 1 K 15 V AC 60 Hz 1) 9 With order code L 1 L 40 V AC 60 Hz 1) 9 With order code L 1 M 1 th position Operating voltage of the nd release Standard voltages Special voltages Without, or c.t.-operated release 0 4 V DC 1 48 V DC 60 V DC 3 110 V DC 4 0 V DC 5 100 V AC 60 Hz 1) 6 110 V AC 60 Hz 1) 7 30 V AC 60 Hz 1) 8 30 V DC 9 With order code M 1 A 3 V DC 9 With order code M 1 B V DC 9 With order code M 1 C 15 V DC 9 With order code M 1 D 17 V DC 9 With order code M 1 E 40 V DC 9 With order code M 1 F V AC 60 Hz 1) 9 With order code M 1 K 15 V AC 60 Hz 1) 9 With order code M 1 L 40 V AC 60 Hz 1) 9 With order code M 1 M 1) The AC frequency 50 or 60 Hz is selected at the 16 th position of the ordernumbertogetherwiththelanguage(seepage6) Configuration example SION vacuum circuit-breaker 3 A E 1 (U r =4kV, 60 Hz, U p = 15 kv, I sc =5kA, I r = 000 A, pole-center distance = 75 mm, width across flats = 310 mm) 3 5 4 4 A C Operating voltage of the 1 st release 3 V DC 9 L 1 B Without nd release 0 4 Siemens HG 11.0 008 Example for Order No.: 3 A E 1 3 5 4 4 A C 9 0 Order codes: L 1 B
Equipment Selection Secondary equipment for standard circuit-breakers 13 th position Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes Circuit-breaker installation accessories Order No.: 3 A E 1 Options Without circuit-breaker installation accessories, fixed-mounted circuit-breaker 0 With drawout element 1 With drawout element, contact arms and contact system With drawout element, contact arms and contact system, fixed contacts and bushings 3 Seepage6 Seepage6 Seepage7 14 th position Operating voltage of the motor operating mechanism Standard voltages Special voltages 4 V DC B 48 V DC C 60 V DC D 110 V DC E 0 V DC F 100 V AC 60 Hz 1) H 110 V AC 60 Hz 1) J 30 V AC 60 Hz 1) K 30 V DC M 3 V DC N V DC P 15 V DC Q 17 V DC R 40 V DC S V AC 60 Hz 1) U 15 V AC 60 Hz 1) V 40 V AC 60 Hz 1) W 1) The AC frequency 50 or 60 Hz is selected at the 16 th position of the ordernumbertogetherwiththelanguage(seepage6) Configuration example SION vacuum circuit-breaker 3 A E 1 (U r =4kV, 60 Hz, U p = 15 kv, I sc =5kA, I r = 000 A, pole-center distance = 75 mm, width across flats = 310 mm) 3 5 4 4 A C 9 0 Fixed-mounted circuit-breaker 0 Operating voltage of the motor operating mechanism 30 V AC K Example for Order No.: 3 A E 1 3 5 4 4 A C 9 0 0 K Order codes: L 1 B Siemens HG 11.0 008 5
Equipment Selection Secondary equipment for standard circuit-breakers SION Vacuum Circuit-Breakers 15 th position Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes Interlocking, auxiliary switch, circuit-breaker Order No.: 3 A E 1 tripping signal and control cable connection Auxiliary switch Control cable connection Mechanical interlocking 6NO+6NC 1NO+1NC Circuit-breaker tripping signal 7-pole terminal strip 4-pole plug 64-pole plug Seepage7 B D F H K M R Q A C E G J L N P Special versions Auxiliary switch contacts 1 NO + 1 NC and pins of the 64-pole plug connector gold-plated Z A 1 Key-interlocking (RONIS-lock at the vacuum circuit-breaker) Only for circuit-breakers without mechanical interlocking Z J 6 0 16 th position AC frequency of operating voltages Languages of operating instructions and rating plate Language selection Frequency selection German English French Spanish DC 50 Hz 50 Hz and DC 60 Hz 60 Hz and DC 0 1 3 4 5 6 7 Other languages on request Configuration example SION vacuum circuit-breaker 3 A E 1 (U r =4kV, 60 Hz, U p = 15 kv, I sc =5kA, I r = 000 A, pole-center distance = 75 mm, width across flats = 310 mm) 3 5 4 4 A C 9 0 0 K With mechanical interlocking, circuit-breaker tripping signal, auxiliary switch 1 NO + 1 NC and 64-pole plug N Frequency of the operating voltage 50 Hz and DC, operating instructions and rating plate in German 0 6 Siemens HG 11.0 008 Example for Order No.: 3 A E 1 3 5 4 4 A C 9 0 0 K N 0 Order codes: L 1 B
Equipment Selection Additional equipment for standard circuit-breakers Additional equipment Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes Order No.: 3 A E 1 Options Wiring cables, halogen-free and flame-retardant Z A 1 0 Condensation protection, heating for 30 V AC, 50 W Z A 3 0 Silicone-free design Z A 3 1 For circuit-breaker operation at ambient air temperatures down to 5 C Z A 4 0 Electrical closing lock-out Z A 4 7 Additional rating plate, loose delivery Z B 0 0 Separating shell towards contact arm side (standard version) Z D 9 0 Separating shell towards contact arm side (short version, for 4 kv only) Z D 9 1 Routine test certificate (enclosed with delivery) Z F 0 Routine test certificate (with stamp and signature) Z F 1 Routine test certificate (to orderer) Z F 3 Specialoperatingsequence(upto31.5kA):O-0.3s-CO-15s-CO Z F 8 Hand crank (for manual charging of the closing spring) Z F 3 0 Hand crank, long version Z F 3 1 Handle for drawout element (for racking the circuit-breaker on the drawout element) Z F 3 Key interlocking (only for designs with mechanical interlocking) Z J 6 0 Indication of disconnected position of the circuit-breaker (circuit-breaker with drawout element) Z J 6 1 Configuration example SION vacuum circuit-breaker 3 A E 1 (U r = 4 kv, 60 Hz, U p = 15 kv, I sc =5kA,I r = 000 A, pole-center distance = 75 mm, width across flats = 310 mm) 3 5 4 4 1 st shunt release A Operating voltage of the closing solenoid 48 V DC C Operating voltage of the 1 st release 3 V DC 9 L 1 B Without nd release 0 Fixed-mounted circuit-breaker 0 Operating voltage of the motor operating mechanism 30 V AC K With mechanical interlocking, circuit-breaker tripping signal, auxiliary switch 1 NO + 1 NC and 64-pole plug N Frequency of the operating voltage 50 Hz and DC, operating instructions and rating plate in German 0 Hand crank Z F 3 0 Example for Order No.: 3 A E 1 3 5 4 4 A C 9 0 0 K N 0 Z Order codes: L 1 B + F 3 0 Siemens HG 11.0 008 7
Equipment Selection Selection of basic types, slide-in modules SION Vacuum Circuit-Breakers 7. kv Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes 60 Hz Order No.: 3 A E 1 Rated voltage Rated lightning impulse Rated short-duration power-frequency Rated short-circuit breaking current at 36 % DC component Rated short-circuit making current (at 60 Hz) Pole-center distance Width across flats Rated normal current Seepage3 Seepage3 Seepage33 Seepage33 Seepage34 Seepage34 Seepage35 Seepage35 Seepage36 U r U p U d I sc I ma I r kv kv kv ka ka mm mm A 7. 60 0 16 10 310 800 3 A E 1 0 8 1 310 150 3 A E 1 0 8 75 800 3 A E 1 0 7 1 75 150 3 A E 1 0 7 150 310 800 3 A E 1 0 1 310 150 3 A E 1 0 75 800 3 A E 1 0 1 1 75 150 3 A E 1 0 1 7. 60 0 0 10 310 800 3 A E 1 0 8 3 1 310 150 3 A E 1 0 8 3 75 800 3 A E 1 0 7 3 1 75 150 3 A E 1 0 7 3 150 310 800 3 A E 1 0 3 1 310 150 3 A E 1 0 3 75 800 3 A E 1 0 1 3 1 75 150 3 A E 1 0 1 3 7. 60 0 5 10 310 800 3 A E 1 0 8 4 1 310 150 3 A E 1 0 8 4 310 000 3 A E 1 0 8 4 4 75 800 3 A E 1 0 7 4 1 75 150 3 A E 1 0 7 4 150 310 800 3 A E 1 0 4 1 310 150 3 A E 1 0 4 75 800 3 A E 1 0 1 4 1 75 150 3 A E 1 0 1 4 7. 60 0 31.5 10 310 800 3 A E 1 0 8 5 1 310 150 3 A E 1 0 8 5 310 000 3 A E 1 0 8 5 4 310 500 3 A E 1 0 8 5 6 75 800 3 A E 1 0 7 5 1 75 150 3 A E 1 0 7 5 150 310 800 3 A E 1 0 5 1 310 150 3 A E 1 0 5 75 800 3 A E 1 0 1 5 1 75 150 3 A E 1 0 1 5 7. 60 0 40 100/104 10 310 150 3 A E 1 0 8 6 310 000 3 A E 1 0 8 6 4 310 500 3 A E 1 0 8 6 6 310 3150 3 A E 1 0 8 6 7 Configuration example SION vacuum circuit-breaker 3 A E 1 Rated voltage U r =7.kV, 60 Hz Rated lightning impulse U p =60kV Rated short-circuit breaking current I sc =0kA Rated normal current I r = 150 A Pole-center distance = 10 mm, width across flats = 310 mm 0 8 3 8 Siemens HG 11.0 008 Example for Order No.: 3 A E 1 0 8 3 Order codes:
Equipment Selection Selection of basic types, slide-in modules 1 kv Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes 60 Hz Order No.: 3 A E 1 Rated voltage Rated lightning impulse Rated short-duration power-frequency Rated short-circuit breaking current at 36 % DC component Rated short-circuit making current (at 60 Hz) Pole-center distance Width across flats Rated normal current Seepage3 Seepage3 Seepage33 Seepage33 Seepage34 Seepage34 Seepage35 Seepage35 Seepage36 U r U p U d I sc I ma I r kv kv kv ka ka mm mm A 1 75 8 16 10 310 800 3 A E 1 1 8 1 310 150 3 A E 1 1 8 75 800 3 A E 1 1 7 1 75 150 3 A E 1 1 7 150 310 800 3 A E 1 1 1 310 150 3 A E 1 1 75 800 3 A E 1 1 1 1 75 150 3 A E 1 1 1 1 75 8 0 10 310 800 3 A E 1 1 8 3 1 310 150 3 A E 1 1 8 3 75 800 3 A E 1 1 7 3 1 75 150 3 A E 1 1 7 3 150 310 800 3 A E 1 1 3 1 310 150 3 A E 1 1 3 75 800 3 A E 1 1 1 3 1 75 150 3 A E 1 1 1 3 1 75 8 5 10 310 800 3 A E 1 1 8 4 1 310 150 3 A E 1 1 8 4 310 000 3 A E 1 1 8 4 4 310 500 3 A E 1 1 8 4 6 75 800 3 A E 1 1 7 4 1 75 150 3 A E 1 1 7 4 150 310 800 3 A E 1 1 4 1 310 150 3 A E 1 1 4 75 800 3 A E 1 1 1 4 1 75 150 3 A E 1 1 1 4 1 75 8 31.5 10 310 800 3 A E 1 1 8 5 1 310 150 3 A E 1 1 8 5 310 000 3 A E 1 1 8 5 4 310 500 3 A E 1 1 8 5 6 75 800 3 A E 1 1 7 5 1 75 150 3 A E 1 1 7 5 150 310 800 3 A E 1 1 5 1 310 150 3 A E 1 1 5 75 800 3 A E 1 1 1 5 1 75 150 3 A E 1 1 1 5 1 75 8 40 100/104 10 310 150 3 A E 1 1 8 6 310 000 3 A E 1 1 8 6 4 310 500 3 A E 1 1 8 6 6 310 3150 3 A E 1 1 8 6 7 Special version (available for all 1 kv slide-in modules) U d =kv Z E 1 3 Configuration example SION vacuum circuit-breaker 3 A E 1 Rated voltage U r =1kV, 60 Hz Rated lightning impulse U p =75kV Rated short-circuit breaking current I sc =5kA Rated normal current I r = 800 A Pole-center distance = 150 mm, width across flats = 75 mm 1 1 4 1 Rated short-duration power-frequency U d =kv Z E 1 3 Example for Order No.: 3 A E 1 1 1 4 1 Z Order codes: E 1 3 Siemens HG 11.0 008 9
Equipment Selection Selection of basic types, slide-in modules SION Vacuum Circuit-Breakers 17.5 kv Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes 60 Hz Order No.: 3 A E 1 Rated voltage Rated lightning impulse Rated short-duration power-frequency Rated short-circuit breaking current at 36 % DC component Rated short-circuit making current (at 60 Hz) Pole-center distance Width across flats Rated normal current Seepage3 Seepage3 Seepage33 Seepage33 Seepage34 Seepage34 Seepage35 Seepage35 Seepage36 U r U p U d I sc I ma I r kv kv kv ka ka mm mm A 17.5 95 38 1.5 31/33 10 310 800 3 A E 1 8 1 1 310 150 3 A E 1 8 1 75 800 3 A E 1 7 1 1 75 150 3 A E 1 7 1 150 310 800 3 A E 1 1 1 310 150 3 A E 1 1 75 800 3 A E 1 1 1 1 75 150 3 A E 1 1 1 17.5 95 38 16 10 310 800 3 A E 1 8 1 310 150 3 A E 1 8 75 800 3 A E 1 7 1 75 150 3 A E 1 7 150 310 800 3 A E 1 1 310 150 3 A E 1 75 800 3 A E 1 1 1 75 150 3 A E 1 1 17.5 95 38 5 10 310 800 3 A E 1 8 4 1 310 150 3 A E 1 8 4 310 000 3 A E 1 8 4 4 310 500 3 A E 1 8 4 6 75 800 3 A E 1 7 4 1 75 150 3 A E 1 7 4 150 310 800 3 A E 1 4 1 310 150 3 A E 1 4 75 800 3 A E 1 1 4 1 75 150 3 A E 1 1 4 17.5 95 38 31.5 10 310 800 3 A E 1 8 5 1 310 150 3 A E 1 8 5 310 000 3 A E 1 8 5 4 310 500 3 A E 1 8 5 6 75 800 3 A E 1 7 5 1 75 150 3 A E 1 7 5 150 310 800 3 A E 1 5 1 310 150 3 A E 1 5 75 800 3 A E 1 1 5 1 75 150 3 A E 1 1 5 17.5 95 38 40 100/104 10 310 150 3 A E 1 8 6 310 000 3 A E 1 8 6 4 310 500 3 A E 1 8 6 6 310 3150 3 A E 1 8 6 7 Configuration example SION vacuum circuit-breaker 3 A E 1 Rated voltage U r = 17.5 kv, 60 Hz Rated lightning impulse U p =95kV Rated short-circuit breaking current I sc =16kA Rated normal current I r = 150 A Pole-center distance = 10 mm, width across flats = 75 mm 7 30 Siemens HG 11.0 008 Example for Order No.: 3 A E 1 7 Order codes:
Equipment Selection Selection of basic types, slide-in modules 4 kv Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes 60 Hz Order No.: 3 A E 1 Rated voltage Rated lightning impulse Rated short-duration power-frequency Rated short-circuit breaking current at 36 % DC component Rated short-circuit making current (at 60 Hz) Pole-center distance Width across flats Rated normal current Seepage3 Seepage3 Seepage33 Seepage33 Seepage34 Seepage34 Seepage35 Seepage35 Seepage36 U r U p U d I sc I ma I r kv kv kv ka ka mm mm A 4 15 50 1.5 31/33 10 310 800 3 A E 1 3 1 1 310 150 3 A E 1 3 1 4 15 50 16 10 310 800 3 A E 1 3 1 310 150 3 A E 1 3 310 000 3 A E 1 3 4 75 310 800 3 A E 1 3 5 1 310 150 3 A E 1 3 5 310 000 3 A E 1 3 5 4 4 15 50 0 10 310 800 3 A E 1 3 3 1 310 150 3 A E 1 3 3 310 000 3 A E 1 3 3 4 310 500 3 A E 1 3 3 6 75 310 800 3 A E 1 3 5 3 1 310 150 3 A E 1 3 5 3 310 000 3 A E 1 3 5 3 4 310 500 3 A E 1 3 5 3 6 4 15 50 5 10 310 800 3 A E 1 3 4 1 310 150 3 A E 1 3 4 310 000 3 A E 1 3 4 4 310 500 3 A E 1 3 4 6 75 310 800 3 A E 1 3 5 4 1 310 150 3 A E 1 3 5 4 310 000 3 A E 1 3 5 4 4 310 500 3 A E 1 3 5 4 6 Configuration example SION vacuum circuit-breaker 3 A E 1 Rated voltage U r =4kV, 60 Hz Rated lightning impulse U p = 15 kv Rated short-circuit breaking current I sc =5kA Rated normal current I r = 000 A Pole-center distance = 75 mm, width across flats = 310 mm 3 5 4 4 Example for Order No.: 3 A E 1 3 5 4 4 Order codes: Siemens HG 11.0 008 31
Equipment Selection Secondary equipment for slide-in modules SION Vacuum Circuit-Breakers 9 th position Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes Release combination Order No.: 3 A E 1 1 st shunt release nd shunt release Undervoltage release C.t.-operated release 0.5 A C.t.-operated release 1.0 A C.t.-operated release with tripping pulse W 0.1 Ws (0 O) Seepage33 Seepage33 Seepage34 Seepage34 Seepage35 Seepage35 Seepage36 A B C G H F E N P Q J L M 10 th position Operating voltage of the closing solenoid Standard voltages Special voltages 4 V DC B 48 V DC C 60 V DC D 110 V DC E 0 V DC F 100 V AC 60 Hz 1) H 110 V AC 60 Hz 1) J 30 V AC 60 Hz 1) K 30 V DC M 3 V DC N V DC P 15 V DC Q 17 V DC R 40 V DC S V AC 60 Hz 1) U 15 V AC 60 Hz 1) V 40 V AC 60 Hz 1) W 1) The AC frequency 50 or 60 Hz is selected at the 16 th position of the ordernumbertogetherwiththelanguage(seepage35) Configuration example SION vacuum circuit-breaker 3 A E 1 (U r =4kV, 60 Hz, U p = 15 kv, I sc =5kA, I r = 000 A, pole-center distance = 75 mm, width across flats = 310 mm) 3 5 4 4 1 st shunt release A Operating voltage of the closing solenoid 48 V DC C Example for Order No.: 3 A E 1 3 5 4 4 A C Order codes: 3 Siemens HG 11.0 008
Equipment Selection Secondary equipment for slide-in modules 11 th position Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes Operating voltage of the 1 st release Order No.: 3 A E 1 Standard voltages Special voltages Seepage34 Seepage34 Seepage35 Seepage35 Seepage36 C.t.-operated release 0 4 V DC 1 48 V DC 60 V DC 3 110 V DC 4 0 V DC 5 100 V AC 60 Hz 1) 6 110 V AC 60 Hz 1) 7 30 V AC 60 Hz 1) 8 30 V DC 9 With order code L 1 A 3 V DC 9 With order code L 1 B V DC 9 With order code L 1 C 15 V DC 9 With order code L 1 D 17 V DC 9 With order code L 1 E 40 V DC 9 With order code L 1 F V AC 60 Hz 1) 9 With order code L 1 K 15 V AC 60 Hz 1) 9 With order code L 1 L 40 V AC 60 Hz 1) 9 With order code L 1 M 1 th position Operating voltage of the nd release Standard voltages Special voltages Without, or c.t.-operated release 0 4 V DC 1 48 V DC 60 V DC 3 110 V DC 4 0 V DC 5 100 V AC 60 Hz 1) 6 110 V AC 60 Hz 1) 7 30 V AC 60 Hz 1) 8 30 V DC 9 With order code M 1 A 3 V DC 9 With order code M 1 B V DC 9 With order code M 1 C 15 V DC 9 With order code M 1 D 17 V DC 9 With order code M 1 E 40 V DC 9 With order code M 1 F V AC 60 Hz 1) 9 With order code M 1 K 15 V AC 60 Hz 1) 9 With order code M 1 L 40 V AC 60 Hz 1) 9 With order code M 1 M 1) The AC frequency 50 or 60 Hz is selected at the 16 th position of the ordernumbertogetherwiththelanguage(seepage35) Configuration example SION vacuum circuit-breaker 3 A E 1 (U r =4kV, 60 Hz, U p = 15 kv, I sc =5kA, I r = 000 A, pole-center distance = 75 mm, width across flats = 310 mm) 3 5 4 4 A C Operating voltage of the 1 st release 3 V DC 9 L 1 B Without nd release 0 Example for Order No.: 3 A E 1 3 5 4 4 A C 9 0 Order codes: L 1 B Siemens HG 11.0 008 33
Equipment Selection Secondary equipment for slide-in modules SION Vacuum Circuit-Breakers 13 th position Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes Circuit-breaker installation accessories Order No.: 3 A E 1 Options Seepage35 Seepage35 Seepage36 On cartridge, with drawout element, contact arms, contact system, fixed contacts, bushings and shutters 5 On cartridge, with drawout element, contact arms, contact system, fixed contacts, bushings, shutters and earthing switch with short-circuit making capacity 6 Drawings of the fully equipped slide-in-module. Scope of supply includes fixed-mounted circuit-breaker 8 14 th position Operating voltage of the motor operating mechanism Standard voltages Special voltages 4 V DC B 48 V DC C 60 V DC D 110 V DC E 0 V DC F 100 V AC 60 Hz 1) H 110 V AC 60 Hz 1) J 30 V AC 60 Hz 1) K 30 V DC M 3 V DC N V DC P 15 V DC Q 17 V DC R 40 V DC S V AC 60 Hz 1) U 15 V AC 60 Hz 1) V 40 V AC 60 Hz 1) W 1) The AC frequency 50 or 60 Hz is selected at the 16 th position of the ordernumbertogetherwiththelanguage(seepage35) Configuration example SION vacuum circuit-breaker 3 A E 1 (U r =4kV, 60 Hz, U p = 15 kv, I sc =5kA, I r = 000 A, pole-center distance = 75 mm, width across flats = 310 mm) 3 5 4 4 A C 9 0 Circuit-breaker on cartridge, with drawout element, contact arms, contact system, fixed contacts, bushings and shutters 5 Operating voltage of the motor operating mechanism 40 V DC S Example for Order No.: 3 A E 1 3 5 4 4 A C 9 0 5 S Order codes: L 1 B 34 Siemens HG 11.0 008
Equipment Selection Secondary equipment for slide-in modules 15 th position Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes Interlocking, auxiliary switch, circuit-breaker Order No.: 3 A E 1 tripping signal and control cable connection Auxiliary switch Control cable connection Mechanical interlocking 6NO+6NC 1NO+1NC Circuit-breaker tripping signal 7-pole terminal strip 64-pole plug Seepage36 A C J L N P Special versions Auxiliary switch contacts 1 NO + 1 NC and pins of the 64-pole plug connector gold-plated Z A 1 16 th position AC frequency of operating voltages Languages of operating instructions and rating plate Language selection Frequency selection German English French Spanish DC 50 Hz 50 Hz and DC 60 Hz 60 Hz and DC 0 1 3 4 5 6 7 Other languages on request Configuration example SION vacuum circuit-breaker 3 A E 1 (U r = 4 kv, 60 Hz, U p = 15 kv, I sc =5kA,I r = 000 A, pole-center distance = 75 mm, width across flats = 310 mm) 3 5 4 4 A C 9 0 5 S With mechanical interlocking, circuit-breaker tripping signal, auxiliary switch 1 NO + 1 NC and 64-pole plug N Frequency of the operating voltage DC, operating instruction and rating plate in Spanish 6 Auxiliary switch contacts 1 NO + 1 NC and plug pins gold-plated Z A 1 Example for Order No.: 3 A E 1 3 5 4 4 A C 9 0 5 S N 6 Z Order codes: L 1 B + A 1 Siemens HG 11.0 008 35
Equipment Selection Additional equipment for slide-in modules SION Vacuum Circuit-Breakers Additional equipment Position: 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Ordercodes Order No.: 3 A E 1 Options Wiring cables, halogen-free and flame-retardant Z A 1 0 Condensation protection, heating for 30 V AC, 50 W Z A 3 0 Silicone-free design Z A 3 1 For circuit-breaker operation at ambient air temperatures down to 5 C Z A 4 0 Electrical closing lock-out Z A 4 7 Additional rating plate, loose delivery Z B 0 0 Routine test certificate (enclosed with delivery) Z F 0 Routine test certificate (with stamp and signature) Z F 1 Routine test certificate (to orderer) Z F 3 Specialoperatingsequence(upto31.5kA):O-0.3s-CO-15s-CO Z F 8 Hand crank (for manual charging of the closing spring) Z F 3 0 Hand crank, long version Z F 3 1 Handle for drawout element (for racking the circuit-breaker on the drawout element) Z F 3 Handle for earthing switch (for operating the earthing switch at the module) Z F 3 4 Key interlocking (only for designs with mechanical interlocking) Z J 6 0 Configuration example SION vacuum circuit-breaker 3 A E 1 (U r = 4 kv, 60 Hz, U p = 15 kv, I sc =5kA,I r = 000 A, pole-center distance = 75 mm, width across flats = 310 mm) 3 5 4 4 1 st shunt release A Operating voltage of the closing solenoid 48 V DC C Operating voltage of the 1 st release 3 V DC 9 L 1 B Without nd release 0 Circuit-breaker on cartridge, with drawout element, contact arms, contact system, fixed contacts, bushings and shutters 5 Operating voltage of the motor operating mechanism 40 V DC S With mechanical interlocking, circuit-breaker tripping signal, auxiliary switch 1 NO + 1 NC and 64-pole plug N Frequency of the operating voltage DC, operating instructions and rating plate in Spanish 6 Auxiliary switch contacts 1 NO + 1 NC and plug pins gold-plated Z A 1 Wiring cables halogen-free and flame-retardant Z A 1 0 Silicone-free design Z A 3 1 Electrical closing lock-out Z A 4 7 36 Siemens HG 11.0 008 Example for Order No.: 3 A E 1 3 5 4 4 A C 9 0 5 S N 6 Z Order codes: L 1 B + A 1 + A 1 0 + A 3 1 + A 4 7
Equipment Selection Accessories and spare parts Retrofitting When releases/solenoids are retrofitted, the order numbers of the mounting parts must also be specified. For other additional equipment, the required mounting parts are included in the delivery. Spare parts When releases/solenoids are required as spare parts, the order number and the type of construction of the associated circuit-breaker type must also be specified. Remark for orders The order numbers are applicable to vacuum circuitbreakers of current manufacture. When mounting parts or spare parts are being ordered for an existing vacuum circuit-breaker, always quote the type designation, serial number, design code and the year of manufacture of the circuit-breaker to be sure to get the correct delivery. Accessories for the plug connector Included in the scope of supply of the basic equipment for SION vacuum circuit-breakers: For 4-pole plug connector Lower part of plug Crimp sockets according to number of contacts Upper part of plug with screwed contacts (no crimp sockets required) For 64-pole plug connector Lower part of plug Upper part of plug Crimp sockets according to number of contacts Vacuum interrupters and other spare parts must only be replaced by instructed personnel. Designation Remarks Operating voltage Order No. Handles Hand crank for circuit-breaker 3AX15 30-B Long hand crank for circuit-breaker 3AX14 30-B Handle for drawout element 3AX14 30-C Handle for earthing switch (for modules up to 31.5 ka) 3AX14 30-D Handle for earthing switch (for 40 ka modules) 3AX14 30-3D Lubricant 180 g of Klüber-Isoflex Topas L3N 3AX11 33-3H 1 kg of Klüber-Isoflex Topas L3N 3AX11 33-3E 1kgofMolykotegrease 3AX11 33-L Operating solenoid Used as closing solenoid or 4 V DC 3AY15 10-5B 1 st shunt release 30/3 V DC 3AY15 10-5M 48 V DC 3AY15 10-5C 60 V DC 3AY15 10-5D 100/14 V DC 3AY15 10-5E 15/144 V DC 3AY15 10-5N 0/50 V DC 3AY15 10-5F 100/15 V AC, 60 Hz 3AY15 10-5E 30/40 V AC, 60 Hz 3AY15 10-5F nd shunt release 4 3VDC 3AX11 01-B 48 60VDC 3AX11 01-C 110 17 V DC 3AX11 01-E 0 40 V DC 3AX11 01-F 100 15 V AC, 50 Hz 3AX11 01-G 30 40 V AC, 50 Hz 3AX11 01-J 100 15 V AC, 60 Hz 3AX11 01-3G 30 40 V AC, 60 Hz 3AX11 01-3J Mounting parts For nd shunt release 3AX14 11-A Current-transformer For rated normal current 0.5 A 3AX11 0-A operated release For rated normal current 1 A 3AX11 0-B For tripping pulse W 0.1 Ws, 0 O for protection relay 7SJ45 3AX11 04-B Mounting parts For current-transformer operated release 3AX14 11-A Siemens HG 11.0 008 37
Equipment Selection Accessories and spare parts SION Vacuum Circuit-Breakers Designation Remarks Operating voltage Order No. Undervoltage release 4 V DC 3AX11 03-B 30/3 V DC 3AX11 03-L 48 V DC 3AX11 03-C 60 V DC 3AX11 03-D 110 V DC 3AX11 03-E /17 V DC 3AX11 03-N 0 V DC 3AX11 03-F 40 V DC 3AX11 03-P 100 V AC, 50 Hz 3AX11 03-G 110/15 V AC, 50 Hz 3AX11 03-H 30 V AC, 50 Hz 3AX11 03-J 40 V AC, 50 Hz 3AX11 03-M 100 V AC, 60 Hz 3AX11 03-3G 110/15 V AC, 60 Hz 3AX11 03-3H 30 V AC, 60 Hz 3AX11 03-3J 40 V AC, 60 Hz 3AX11 03-3M Mounting parts For undervoltage release 3AX14 13-A Drive motor 4/30/3 V DC 3AY17 11-B 48 V DC 3AY17 11-C 60 V DC 3AY17 11-D 100/110/15 V DC/AC 3AY17 11-E 0 V DC/30 V AC 3AY17 11-F Auxiliary contactor Type 3RH11 for anti-pumping 4 V DC SWB: 556 30/3 V DC SWB: 558 48 V DC SWB: 559 60 V DC SWB: 55660 110 V DC SWB: 55661 /17 V DC SWB: 5566 0 V DC SWB: 55663 50 V DC SWB: 556 110 V AC, 60 Hz SWB: 55666 V AC, 60 Hz SWB: 55667 15 V AC, 60 Hz SWB: 55668 30 V AC, 60 Hz SWB: 55669 40 V AC, 60 Hz SWB: 55670 Position switch Type SE4 without installation accessories SWB: 46677 Used for: Nos. Electrical anti-pumping (-S3) 1 Electrical interlocking (-S1) 1 Motor control (-S1, -S) Closing spring charged (-S4) 1 Circuit-breaker tripping signal (-S6) Electrical closing lock-out (-S5) 1 Drawout element (-S1.0 to - S1.9) 10 Auxiliary switch (-S1) 6NO+6NC 3SV9 73-AA0 1NO+1NC 3SV9 74-AA0 Mechanical interlocking 3AX14 0-A Key-operated interlocking 3AX14 37-A Module connector State position indicator of drawout element 3AX14 60-A Accessories for plug connector (for conductor cross-section 1.5 mm) Crimp pins (for lower part of plug) 4-pole 3AX11 34-3A 64-pole 3AX11 34-4B Crimp sockets (for upper part of plug) 64-pole 3AX11 34-4C Crimping pliers 3AX11 34-4D Disassembly tool 3AX11 34-4G Plug connector, complete 4-pole 3AX11 34-7A 64-pole 3AX11 34-6A 38 Siemens HG 11.0 008
Equipment Selection Accessories and spare parts Designation Remarks Operating voltage Order No. Electrical closing lock-out 4 V DC 3AX14 05-B 30/3 V DC 3AX14 05-K 48 V DC 3AX14 05-C 60 V DC 3AX14 05-D 110/17 V DC 3AX14 05-E 0/40 V DC 3AX14 05-F 100 V AC, 60 Hz 3AX14 05-G 110/15 V AC, 60 Hz 3AX14 05-H 0/40 V AC, 60 Hz 3AX14 05-J Mounting parts For electrical closing lock-out 3AX14 15-A Bushing 7. to 17.5 kv to 150 A 3AX14 51-A 7. to 17.5 kv to 3150 A 3AX14 51-B 4 kv to 500 A 3AX14 51-B Separating shell towards Additional shielding for narrow mounting conditions contact arm side, for standard Standard version, width across flats 310 mm 7. to 17.5 kv 3AX14 38-A circuit-breakers only Standard version, width across flats 75 mm 7. to 17.5 kv 3AX14 38-C Standard version, width across flats 05 mm 7. to 17.5 kv 3AX14 38-D Standard version, width across flats 310 mm 4 kv 3AX14 38-B Short version, width across flats 310 mm 4 kv 3AX14 38-3B Gate for cartridge Short version 3AX14 -B Contact system 7./1/4 kv, 800 to 150 A 3AX14 -A 17.5 kv, 800 to 150 A 3AX14 -B 7./1/4 kv, to 3150 A 3AX14 -C 17.5 kv, to 3150 A 3AX14 -D Contact arm, complete 7./1 kv, up to 31.5 ka, up to 150 A 3AX14 43-A with contact system 7./1 kv, up to 31.5 ka, up to 500 A 3AX14 43-B 17.5 kv, up to 31.5 ka, up to 150 A 3AX14 43-C 17.5 kv, up to 31.5 ka, up to 500 A 3AX14 43-D 4 kv, up to 5 ka, up to 150 A 3AX14 43-E 4 kv, up to 5 ka, up to 500 A 3AX14 43-F 7./1 kv, 40 ka, up to 150 A 3AX14 43-G 7./1 kv, 40 ka, up to 3150 A 3AX14 43-H 17.5 kv, 40 ka, up to 150 A 3AX14 43-J 17.5 kv, 40 ka, up to 3150 A 3AX14 43-K Fixed contact 7./1/17.5kV, up to31.5ka, up to150a 3AX14 44-A 7./1/17.5kV, up to31.5ka, up to500a 3AX14 44-B 7./1/17.5 kv, 40 ka, up to 3150 A 3AX14 44-A 4 kv, up to 5 ka, up to 500 A 3AX14 44-C Conductor bars (1 set each) 110mmpole-centerdistance, 75mmwidthacrossflats 7./1/17.5kV, up to31.5ka, up to150a 3AX14 55-A for earthingswitch connection 150 mm pole-center distance, 310 mm width across flats 7./1/17.5kV, up to31.5ka, up to150a 3AX14 55-A 10 mm pole-center distance, 310 mm width across flats 7./1/17.5kV, up to31.5ka, up to150a 3AX14 55-B 10 mm pole-center distance, 310 mm width across flats 7./1/17.5kV, up to31.5ka, up to500a 3AX14 55-C 10 mm pole-center distance, 310 mm width across flats 7./1/17.5 kv, 40 ka, up to 3150 A 3AX14 55-D 10 mm pole-center distance, 310 mm width across flats 4 kv, up to 5 ka, up to 150 A 3AX14 55-E 75 mm pole-center distance, 310 mm width across flats 4 kv, up to 5 ka, up to 150 A 3AX14 55-F 10 mm pole-center distance, 310 mm width across flats 4 kv, up to 5 ka, up to 500 A 3AX14 55-G 75 mm pole-center distance, 310 mm width across flats 4 kv, up to 5 ka, up to 500 A 3AX14 55-H Data on the rating plate HG11-518_en eps Note: For any query regarding spare parts, subsequent deliveries, etc., the following four details are necessary: Type designation Serial No. Design code Year of manufacture Siemens HG 11.0 008 39
R-HG11-177.tif 40 Siemens HG 11.0 008
Technical Data Contents Contents Technical Data Page 41 Electrical data, dimensions and weights: Voltage level 7. kv Voltage level 1 kv Voltage level 17.5 kv Voltage level 4 kv 46 50 56 SION vacuum circuit-breaker with drawout element, contact arms and contact system R-HG11-178.eps Dimension drawings: Voltage levels 7. to 17.5 kv Voltage level 4 kv Operating times Short-circuit protection of motors Consumption data of releases Circuit diagrams 54 58 59 59 59 60 3 SION vacuum circuit-breaker with drawout element, contact arms and contact system R-HG11-179.eps Siemens HG 11.0 008 41
Technical Data Electrical data, dimensions and weights SION Vacuum Circuit-Breakers 7. kv 60 Hz Order No. Rated normal current Width across flats Pole-center distance Rated operating sequence: O-3min-CO-3min-CO O-0.3s-CO-3min-CO O-0.3s-CO-15s-CO Rated duration of short-circuit Rated short-circuit breaking current DC component in % of the rated short-circuit breaking current Asymmetrical breaking current Rated short-circuit making current (at 60 Hz) Rated lightning impulse Rated short-duration power-frequency Voltage drop ΔU between connections (according to IEC 60694 at DC 100 A) Minimum creepage distance, interrupter Minimum creepage distance, phase-to-earth Minimum clearance, phase-to-phase Minimum clearance, phase-to-earth Weight 1) (fixed-mounted circuit-breaker/slide-in module) Detailed dimension drawing (has to be ordered) Operating cycle diagram no. (see page 45) Catalog dimension drawings (see pages 54/55) (fixed-mounted circuit-breaker/slide-in module) I r t k I sc I ma U p U d A mm mm s ka % ka ka kv kv mv mm mm mm mm kg 3AE1 00-1... 800 05 150 3 16 36 17.9 60 0.1 19 140 105 75 0010 001 1 K/ 3AE1 00-... 150 05 150 3 16 36 17.9 60 0.1 19 140 105 75 0010 001 1 K/ 3AE1 003-1... 800 05 150 3 0 36.4 60 0.1 19 140 105 75 0010 001 K/ 3AE1 003-... 150 05 150 3 0 36.4 60 0.1 19 140 105 75 0010 001 K/ 3AE1 004-1... 800 05 150 3 5 36 8 60 0.1 19 140 105 75 0010 001 3 K/ 3AE1 004-... 150 05 150 3 5 36 8 60 0.1 19 140 105 75 0010 001 3 K/ 3AE1 005-1... 800 05 150 3 31.5 36 35.4 60 0.1 19 140 105 75 0010 001 4 K/ 3 3AE1 005-... 150 05 150 3 31.5 36 35.4 3AE1 01-1... 800 75 150 3 16 36 17.9 3AE1 01-... 150 75 150 3 16 36 17.9 60 0.1 19 140 105 75 60 0.1 19 140 105 75 60 0.1 19 140 105 75 0010 001 0011 001 0011 001 4 K/ 1 I/J 1 I/J 3AE1 013-1... 800 75 150 3 0 36.4 60 0.1 19 140 105 75 0011 001 I/J 3AE1 013-... 150 75 150 3 0 36.4 60 0.1 19 140 105 75 0011 001 I/J 3AE1 014-1... 800 75 150 3 5 36 8 60 0.1 19 140 105 75 0011 001 3 I/J 3AE1 014-... 150 75 150 3 5 36 8 60 0.1 19 140 105 75 0011 001 3 I/J 3AE1 015-1... 800 75 150 3 31.5 36 35.4 60 0.1 19 140 105 75 0011 001 4 I/J 3AE1 015-... 150 75 150 3 31.5 36 35.4 60 0.1 19 140 105 75 0011 001 4 I/J 3AE1 0-1... 800 310 150 3 16 36 17.9 60 0.1 19 140 100 75 001 001 1 H/J 3AE1 0-... 150 310 150 3 16 36 17.9 60 0.1 19 140 100 75 001 001 1 H/J 3AE1 03-1... 800 310 150 3 0 36.4 60 0.1 19 140 100 75 001 001 H/J 3AE1 03-... 150 310 150 3 0 36.4 60 0.1 19 140 100 75 001 001 H/J 3AE1 04-1... 800 310 150 3 5 36 8 60 0.1 19 140 100 75 001 001 3 H/J 3AE1 04-... 150 310 150 3 5 36 8 60 0.1 19 140 100 75 001 001 3 H/J 3AE1 05-1... 800 310 150 3 31.5 36 35.4 60 0.1 19 140 100 75 001 001 4 H/J 3AE1 05-... 150 310 150 3 31.5 36 35.4 60 0.1 19 140 100 75 001 001 4 H/J Standard acc. to IEC 671-100 Possible Not available as slide-in module 1) The weight of the fixed-mounted circuit-breaker with drawout element increases by the values specified in the dimension drawing of slide-in module, page 55 Siemens HG 11.0 008
Technical Data Electrical data, dimensions and weights 7. kv 60 Hz Order No. Rated normal current Width across flats Pole-center distance Rated operating sequence: O-3min-CO-3min-CO O-0.3s-CO-3min-CO O-0.3s-CO-15s-CO Rated duration of short-circuit Rated short-circuit breaking current DC component in % of the rated short-circuit breaking current Asymmetrical breaking current Rated short-circuit making current (at 60 Hz) Rated lightning impulse Rated short-duration power-frequency Voltage drop ΔU between connections (according to IEC 60694 at DC 100 A) Minimum creepage distance, interrupter Minimum creepage distance, phase-to-earth Minimum clearance, phase-to-phase Minimum clearance, phase-to-earth Weight 1) (fixed-mounted circuit-breaker/slide-in module) Detailed dimension drawing (has to be ordered) Operating cycle diagram no. (see page 45) Catalog dimension drawings (see pages 54/55) (fixed-mounted circuit-breaker/slide-in module) I r t k I sc I ma U p U d A mm mm s ka % ka ka kv kv mv mm mm mm mm kg 3AE1 03-1... 800 05 160 3 16 36 17.9 60 0.1 19 140 115 75 0016 001 1 G/ 3AE1 03-... 150 05 160 3 16 36 17.9 60 0.1 19 140 115 75 0016 001 1 G/ 3AE1 033-1... 800 05 160 3 0 36.4 60 0.1 19 140 115 75 0016 001 G/ 3AE1 033-... 150 05 160 3 0 36.4 60 0.1 19 140 115 75 0016 001 G/ 3AE1 034-1... 800 05 160 3 5 36 8 60 0.1 19 140 115 75 0016 001 3 G/ 3AE1 034-... 150 05 160 3 5 36 8 60 0.1 19 140 115 75 0016 001 3 G/ 3AE1 035-1... 800 05 160 3 31.5 36 35.4 60 0.1 19 140 115 75 0016 001 4 G/ 3AE1 035-... 150 05 160 3 31.5 36 35.4 3AE1 0-1... 800 75 160 3 16 36 17.9 3AE1 0-... 150 75 160 3 16 36 17.9 60 0.1 19 140 115 75 60 0.1 19 140 115 75 60 0.1 19 140 115 75 0016 001 0017 001 0017 001 4 G/ 1 F/ 1 F/ 3 3AE1 043-1... 800 75 160 3 0 36.4 60 0.1 19 140 115 75 0017 001 F/ 3AE1 043-... 150 75 160 3 0 36.4 60 0.1 19 140 115 75 0017 001 F/ 3AE1 044-1... 800 75 160 3 5 36 8 60 0.1 19 140 115 75 0017 001 3 F/ 3AE1 044-... 150 75 160 3 5 36 8 60 0.1 19 140 115 75 0017 001 3 F/ 3AE1 045-1... 800 75 160 3 31.5 36 35.4 60 0.1 19 140 115 75 0017 001 4 F/ 3AE1 045-... 150 75 160 3 31.5 36 35.4 60 0.1 19 140 115 75 0017 001 4 F/ 3AE1 0-1... 800 310 160 3 16 36 17.9 60 0.1 19 140 110 75 0018 001 1 E/ 3AE1 0-... 150 310 160 3 16 36 17.9 60 0.1 19 140 110 75 0018 001 1 E/ 3AE1 053-1... 800 310 160 3 0 36.4 60 0.1 19 140 110 75 0018 001 E/ 3AE1 053-... 150 310 160 3 0 36.4 60 0.1 19 140 110 75 0018 001 E/ 3AE1 054-1... 800 310 160 3 5 36 8 60 0.1 19 140 110 75 0018 001 3 E/ 3AE1 054-... 150 310 160 3 5 36 8 60 0.1 19 140 110 75 0018 001 3 E/ 3AE1 055-1... 800 310 160 3 31.5 36 35.4 60 0.1 19 140 110 75 0018 001 4 E/ 3AE1 055-... 150 310 160 3 31.5 36 35.4 60 0.1 19 140 110 75 0018 001 4 E/ 3AE1 06-1... 800 05 10 3 16 36 17.9 60 0.1 19 140 1 75 00 001 1 D/ 3AE1 06-... 150 05 10 3 16 36 17.9 60 0.1 19 140 1 75 00 001 1 D/ Standard acc. to IEC 671-100 Possible Not available as slide-in module 1) The weight of the fixed-mounted circuit-breaker with drawout element increases by the values specified in the dimension drawing of slide-in module, page 55 Siemens HG 11.0 008 43
Technical Data Electrical data, dimensions and weights SION Vacuum Circuit-Breakers 7. kv 60 Hz Order No. Rated normal current Width across flats Pole-center distance Rated operating sequence: O-3min-CO-3min-CO O-0.3s-CO-3min-CO O-0.3s-CO-15s-CO Rated duration of short-circuit Rated short-circuit breaking current DC component in % of the rated short-circuit breaking current Asymmetrical breaking current Rated short-circuit making current (at 60 Hz) Rated lightning impulse Rated short-duration power-frequency Voltage drop ΔU between connections (according to IEC 60694 at DC 100 A) Minimum creepage distance, interrupter Minimum creepage distance, phase-to-earth Minimum clearance, phase-to-phase Minimum clearance, phase-to-earth Weight 1) (fixed-mounted circuit-breaker/slide-in module) Detailed dimension drawing (has to be ordered) Operating cycle diagram no. (see page 45) Catalog dimension drawings (see pages 54/55) (fixed-mounted circuit-breaker/slide-in module) I r t k I sc I ma U p U d A mm mm s ka % ka ka kv kv mv mm mm mm mm kg 3AE1 063-1... 800 05 10 3 0 36.4 60 0.1 19 140 1 75 00 001 D/ 3AE1 063-... 150 05 10 3 0 36.4 60 0.1 19 140 1 75 00 001 D/ 3AE1 064-1... 800 05 10 3 5 36 8 60 0.1 19 140 1 75 00 001 3 D/ 3AE1 064-... 150 05 10 3 5 36 8 60 0.1 19 140 1 75 00 001 3 D/ 3AE1 0-1... 800 05 10 3 31.5 36 35.4 60 0.1 19 140 1 75 00 001 4 D/ 3AE1 0-... 150 05 10 3 31.5 36 35.4 60 0.1 19 140 1 75 00 001 4 D/ 3AE1 07-1... 800 75 10 3 16 36 17.9 60 0.1 19 140 1 75 003 001 1 B/C 3 3AE1 07-... 150 75 10 3 16 36 17.9 3AE1 073-1... 800 75 10 3 0 36.4 3AE1 073-... 150 75 10 3 0 36.4 60 0.1 19 140 1 75 60 0.1 19 140 1 75 60 0.1 19 140 1 75 003 001 003 001 003 001 1 B/C B/C B/C 3AE1 074-1... 800 75 10 3 5 36 8 60 0.1 19 140 1 75 003 001 3 B/C 3AE1 074-... 150 75 10 3 5 36 8 60 0.1 19 140 1 75 003 001 3 B/C 3AE1 075-1... 800 75 10 3 31.5 36 35.4 60 0.1 19 140 1 75 003 001 4 B/C 3AE1 075-... 150 75 10 3 31.5 36 35.4 60 0.1 19 140 1 75 003 001 4 B/C 3AE1 0-1... 800 310 10 3 16 36 17.9 60 0.1 19 140 160 75 004 001 1 A/C 3AE1 0-... 150 310 10 3 16 36 17.9 60 0.1 19 140 160 75 004 001 1 A/C 3AE1 083-1... 800 310 10 3 0 36.4 60 0.1 19 140 160 75 004 001 A/C 3AE1 083-... 150 310 10 3 0 36.4 60 0.1 19 140 160 75 004 001 A/C 3AE1 084-1... 800 310 10 3 5 36 8 60 0.1 19 140 160 75 004 001 3 A/C 3AE1 084-... 150 310 10 3 5 36 8 60 0.1 19 140 160 75 004 001 3 A/C 3AE1 084-4... 000 310 10 3 5 36 8 60 0 1.5 19 110/ 150 008 001 3 L/C 3AE1 085-1... 800 310 10 3 31.5 36 35.4 60 0.1 19 140 160 75 004 001 4 A/C 3AE1 085-... 150 310 10 3 31.5 36 35.4 60 0.1 19 140 160 75 004 001 4 A/C 3AE1 085-4... 000 310 10 3 31.5 36 35.4 60 0 1.5 19 110/ 150 008 001 4 L/C 3AE1 085-6... 500 310 10 3 31.5 36 35.4 60 0 1.5 19 110/ 150 008 001 4 L/C Standard acc. to IEC 671-100 Possible Not available as slide-in module 1) The weight of the fixed-mounted circuit-breaker with drawout element increases by the values specified in the dimension drawing of slide-in module, page 55 44 Siemens HG 11.0 008
Technical Data Electrical data, dimensions and weights 7. kv 60 Hz Order No. Rated normal current Width across flats Pole-center distance Rated operating sequence: O-3min-CO-3min-CO O-0.3s-CO-3min-CO O-0.3s-CO-15s-CO Rated duration of short-circuit Rated short-circuit breaking current DC component in % of the rated short-circuit breaking current Asymmetrical breaking current Rated short-circuit making current (at 60 Hz) Rated lightning impulse Rated short-duration power-frequency Voltage drop ΔU between connections (according to IEC 60694 at DC 100 A) Minimum creepage distance, interrupter Minimum creepage distance, phase-to-earth Minimum clearance, phase-to-phase Minimum clearance, phase-to-earth Weight 1) (fixed-mounted circuit-breaker/slide-in module) Detailed dimension drawing (has to be ordered) Operating cycle diagram no. (see below) Catalog dimension drawings (see pages 54/55) (fixed-mounted circuit-breaker/slide-in module) I r t k I sc I ma U p U d A mm mm s ka % ka ka kv kv mv mm mm mm mm kg 3AE1 086-... 150 310 10 3 40 36 44.9 100/ 104 3AE1 086-4... 000 310 10 3 40 36 44.9 100/ 104 3AE1 086-6... 500 310 10 3 40 36 44.9 100/ 104 3AE1 086-7... 3150 310 10 3 40 36 44.9 100/ 104 60 0 1.7 145 155 169 140 60 0 1.0 145 49 149 140 60 0 1.0 145 49 149 140 60 0 1.0 145 49 149 140 / 160 160/ 10 160/ 10 160/ 10 0070 001 0071 001 0071 001 0071 001 5 M/C 5 M/C 5 M/C 5 M/C Standard acc. to IEC 671-100 Possible Not available as slide-in module 1) The weight of the fixed-mounted circuit-breaker with drawout element increases by the values specified in the dimension drawing of slide-in module, page 55 3 Operating cycle diagrams for 7. kv Operating cycle No. 0 000 10 000 5 000 000 1 000 500 00 180 100 80 50 0 1 3 5 10 0.5 1 5 ka 10 16 0 5 40 50 Breaking current (r.m.s. value) HG11-539b_en eps The permissible number of electrical operating cycles is shown as a function of the breaking current (r.m.s. value). All SION vacuum circuit-breakers fulfil the endurance classes E, M and C according to IEC 671-100. The curve shape beyond the parameters defined in IEC 671-100 is based on average experience data. The number of operating cycles that can actually be reached can be different depending on the respective application. Operating cycle No. 0 000 10 000 5 000 000 1 000 500 00 100 50 0 4 10 0.5 1 5 ka 10 0 31.5 50 Breaking current (r.m.s. value) HG11-540a_en eps Siemens HG 11.0 008 45
Technical Data Electrical data, dimensions and weights SION Vacuum Circuit-Breakers 1 kv 60 Hz Order No. Rated normal current Width across flats Pole-center distance Rated operating sequence: O-3min-CO-3min-CO O-0.3s-CO-3min-CO O-0.3s-CO-15s-CO Rated duration of short-circuit Rated short-circuit breaking current DC component in % of the rated short-circuit breaking current Asymmetrical breaking current Rated short-circuit making current (at 60 Hz) Rated lightning impulse Rated short-duration power-frequency Voltage drop ΔU between connections (according to IEC 60694 at DC 100 A) Minimum creepage distance, interrupter Minimum creepage distance, phase-to-earth Minimum clearance, phase-to-phase Minimum clearance, phase-to-earth Weight 1) (fixed-mounted circuit-breaker/slide-in module) Detailed dimension drawing (has to be ordered) Operating cycle diagram no. (see page 49) Catalog dimension drawings (see pages 54/55) (fixed-mounted circuit-breaker/slide-in module) I r t k I sc I ma U p U d A mm mm s ka % ka ka kv kv mv mm mm mm mm kg 3AE1 10-1... 800 05 150 3 16 36 17.9 75 8.1 19 140 105 75 0010 001 6 K/ 3AE1 10-... 150 05 150 3 16 36 17.9 75 8.1 19 140 105 75 0010 001 6 K/ 3AE1 103-1... 800 05 150 3 0 36.4 75 8.1 19 140 105 75 0010 001 7 K/ 3AE1 103-... 150 05 150 3 0 36.4 75 8.1 19 140 105 75 0010 001 7 K/ 3AE1 104-1... 800 05 150 3 5 36 8 75 8.1 19 140 105 75 0010 001 8 K/ 3AE1 104-... 150 05 150 3 5 36 8 75 8.1 19 140 105 75 0010 001 8 K/ 3AE1 105-1... 800 05 150 3 31.5 36 35.4 75 8.1 19 140 105 75 0010 001 9 K/ 3 3AE1 105-... 150 05 150 3 31.5 36 35.4 3AE1 11-1... 800 75 150 3 16 36 17.9 3AE1 11-... 150 75 150 3 16 36 17.9 75 8.1 19 140 105 75 75 8.1 19 140 105 75 75 8.1 19 140 105 75 0010 001 0011 001 0011 001 9 K/ 6 I/J 6 I/J 3AE1 113-1... 800 75 150 3 0 36.4 75 8.1 19 140 105 75 0011 001 7 I/J 3AE1 113-... 150 75 150 3 0 36.4 75 8.1 19 140 105 75 0011 001 7 I/J 3AE1 114-1... 800 75 150 3 5 36 8 75 8.1 19 140 105 75 0011 001 8 I/J 3AE1 114-... 150 75 150 3 5 36 8 75 8.1 19 140 105 75 0011 001 8 I/J 3AE1 115-1... 800 75 150 3 31.5 36 35.4 75 8.1 19 140 105 75 0011 001 9 I/J 3AE1 115-... 150 75 150 3 31.5 36 35.4 75 8.1 19 140 105 75 0011 001 9 I/J 3AE1 1-1... 800 310 150 3 16 36 17.9 75 8.1 19 140 100 75 001 001 6 H/J 3AE1 1-... 150 310 150 3 16 36 17.9 75 8.1 19 140 100 75 001 001 6 H/J 3AE1 13-1... 800 310 150 3 0 36.4 75 8.1 19 140 100 75 001 001 7 H/J 3AE1 13-... 150 310 150 3 0 36.4 75 8.1 19 140 100 75 001 001 7 H/J 3AE1 14-1... 800 310 150 3 5 36 8 75 8.1 19 140 100 75 001 001 8 H/J 3AE1 14-... 150 310 150 3 5 36 8 75 8.1 19 140 100 75 001 001 8 H/J 3AE1 15-1... 800 310 150 3 31.5 36 35.4 75 8.1 19 140 100 75 001 001 9 H/J 3AE1 15-... 150 310 150 3 31.5 36 35.4 75 8.1 19 140 100 75 001 001 9 H/J 3AE1 13-1... 800 05 160 3 16 36 17.9 75 8.1 19 140 115 75 0016 001 6 G/ 3AE1 13-... 150 05 160 3 16 36 17.9 75 8.1 19 140 115 75 0016 001 6 G/ Standard acc. to IEC 671-100 Possible Not available as slide-in module 1) The weight of the fixed-mounted circuit-breaker with drawout element increases by the values specified in the dimension drawing of slide-in module, page 55 46 Siemens HG 11.0 008
Technical Data Electrical data, dimensions and weights 1 kv 60 Hz Order No. Rated normal current Width across flats Pole-center distance Rated operating sequence: O-3min-CO-3min-CO O-0.3s-CO-3min-CO O-0.3s-CO-15s-CO Rated duration of short-circuit Rated short-circuit breaking current DC component in % of the rated short-circuit breaking current Asymmetrical breaking current Rated short-circuit making current (at 60 Hz) Rated lightning impulse Rated short-duration power-frequency Voltage drop ΔU between connections (according to IEC 60694 at DC 100 A) Minimum creepage distance, interrupter Minimum creepage distance, phase-to-earth Minimum clearance, phase-to-phase Minimum clearance, phase-to-earth Weight 1) (fixed-mounted circuit-breaker/slide-in module) Detailed dimension drawing (has to be ordered) Operating cycle diagram no. (see page 49) Catalog dimension drawings (see pages 54/55) (fixed-mounted circuit-breaker/slide-in module) I r t k I sc I ma U p U d A mm mm s ka % ka ka kv kv mv mm mm mm mm kg 3AE1 133-1... 800 05 160 3 0 36.4 75 8.1 19 140 115 75 0016 001 7 G/ 3AE1 133-... 150 05 160 3 0 36.4 75 8.1 19 140 115 75 0016 001 7 G/ 3AE1 134-1... 800 05 160 3 5 36 8 75 8.1 19 140 115 75 0016 001 8 G/ 3AE1 134-... 150 05 160 3 5 36 8 75 8.1 19 140 115 75 0016 001 8 G/ 3AE1 135-1... 800 05 160 3 31.5 36 35.4 75 8.1 19 140 115 75 0016 001 9 G/ 3AE1 135-... 150 05 160 3 31.5 36 35.4 75 8.1 19 140 115 75 0016 001 9 G/ 3AE1 1-1... 800 75 160 3 16 36 17.9 75 8.1 19 140 115 75 0017 001 6 F/ 3AE1 1-... 150 75 160 3 16 36 17.9 3AE1 143-1... 800 75 160 3 0 36.4 3AE1 143-... 150 75 160 3 0 36.4 75 8.1 19 140 115 75 75 8.1 19 140 115 75 75 8.1 19 140 115 75 0017 001 0017 001 0017 001 6 F/ 7 F/ 7 F/ 3 3AE1 144-1... 800 75 160 3 5 36 8 75 8.1 19 140 115 75 0017 001 8 F/ 3AE1 144-... 150 75 160 3 5 36 8 75 8.1 19 140 115 75 0017 001 8 F/ 3AE1 145-1... 800 75 160 3 31.5 36 35.4 75 8.1 19 140 115 75 0017 001 9 F/ 3AE1 145-... 150 75 160 3 31.5 36 35.4 75 8.1 19 140 115 75 0017 001 9 F/ 3AE1 1-1... 800 310 160 3 16 36 17.9 75 8.1 19 140 110 75 0018 001 6 E/ 3AE1 1-... 150 310 160 3 16 36 17.9 75 8.1 19 140 110 75 0018 001 6 E/ 3AE1 153-1... 800 310 160 3 0 36.4 75 8.1 19 140 110 75 0018 001 7 E/ 3AE1 153-... 150 310 160 3 0 36.4 75 8.1 19 140 110 75 0018 001 7 E/ 3AE1 154-1... 800 310 160 3 5 36 8 75 8.1 19 140 110 75 0018 001 8 E/ 3AE1 154-... 150 310 160 3 5 36 8 75 8.1 19 140 110 75 0018 001 8 E/ 3AE1 155-1... 800 310 160 3 31.5 36 35.4 75 8.1 19 140 110 75 0018 001 9 E/ 3AE1 155-... 150 310 160 3 31.5 36 35.4 75 8.1 19 140 110 75 0018 001 9 E/ 3AE1 16-1... 800 05 10 3 16 36 17.9 75 8.1 19 140 1 75 00 001 6 D/ 3AE1 16-... 150 05 10 3 16 36 17.9 75 8.1 19 140 1 75 00 001 6 D/ 3AE1 163-1... 800 05 10 3 0 36.4 75 8.1 19 140 1 75 00 001 7 D/ 3AE1 163-... 150 05 10 3 0 36.4 75 8.1 19 140 1 75 00 001 7 D/ Standard acc. to IEC 671-100 Possible Not available as slide-in module 1) The weight of the fixed-mounted circuit-breaker with drawout element increases by the values specified in the dimension drawing of slide-in module, page 55 Siemens HG 11.0 008 47
Technical Data Electrical data, dimensions and weights SION Vacuum Circuit-Breakers 1 kv 60 Hz Order No. Rated normal current Width across flats Pole-center distance Rated operating sequence: O-3min-CO-3min-CO O-0.3s-CO-3min-CO O-0.3s-CO-15s-CO Rated duration of short-circuit Rated short-circuit breaking current DC component in % of the rated short-circuit breaking current Asymmetrical breaking current Rated short-circuit making current (at 60 Hz) Rated lightning impulse Rated short-duration power-frequency Voltage drop ΔU between connections (according to IEC 60694 at DC 100 A) Minimum creepage distance, interrupter Minimum creepage distance, phase-to-earth Minimum clearance, phase-to-phase Minimum clearance, phase-to-earth Weight 1) (fixed-mounted circuit-breaker/slide-in module) Detailed dimension drawing (has to be ordered) Operating cycle diagram no. (see page 49) Catalog dimension drawings (see pages 54/55) (fixed-mounted circuit-breaker/slide-in module) I r t k I sc I ma U p U d A mm mm s ka % ka ka kv kv mv mm mm mm mm kg 3AE1 164-1... 800 05 10 3 5 36 8 75 8.1 19 140 1 75 00 001 8 D/ 3AE1 164-... 150 05 10 3 5 36 8 75 8.1 19 140 1 75 00 001 8 D/ 3AE1 1-1... 800 05 10 3 31.5 36 35.4 75 8.1 19 140 1 75 00 001 9 D/ 3AE1 1-... 150 05 10 3 31.5 36 35.4 75 8.1 19 140 1 75 00 001 9 D/ 3AE1 17-1... 800 75 10 3 16 36 17.9 75 8.1 19 140 1 75 003 001 6 B/C 3AE1 17-... 150 75 10 3 16 36 17.9 75 8.1 19 140 1 75 003 001 6 B/C 3AE1 173-1... 800 75 10 3 0 36.4 75 8.1 19 140 1 75 003 001 7 B/C 3 3AE1 173-... 150 75 10 3 0 36.4 3AE1 174-1... 800 75 10 3 5 36 8 3AE1 174-... 150 75 10 3 5 36 8 75 8.1 19 140 1 75 75 8.1 19 140 1 75 75 8.1 19 140 1 75 003 001 003 001 003 001 7 B/C 8 B/C 8 B/C 3AE1 175-1... 800 75 10 3 31.5 36 35.4 75 8.1 19 140 1 75 003 001 9 B/C 3AE1 175-... 150 75 10 3 31.5 36 35.4 75 8.1 19 140 1 75 003 001 9 B/C 3AE1 1-1... 800 310 10 3 16 36 17.9 75 8.1 19 140 160 75 004 001 6 A/C 3AE1 1-... 150 310 10 3 16 36 17.9 75 8.1 19 140 160 75 004 001 6 A/C 3AE1 183-1... 800 310 10 3 0 36.4 75 8.1 19 140 160 75 004 001 7 A/C 3AE1 183-... 150 310 10 3 0 36.4 75 8.1 19 140 160 75 004 001 7 A/C 3AE1 184-1... 800 310 10 3 5 36 8 75 8.1 19 140 160 75 004 001 8 A/C 3AE1 184-... 150 310 10 3 5 36 8 75 8.1 19 140 160 75 004 001 8 A/C 3AE1 184-4... 000 310 10 3 5 36 8 75 8 1.5 19 110/ 150 008 001 8 L/C 3AE1 184-6... 500 310 10 3 5 36 8 75 8 1.5 19 110/ 150 008 001 8 L/C 3AE1 185-1... 800 310 10 3 31.5 36 35.4 75 8.1 19 140 160 75 004 001 9 A/C 3AE1 185-... 150 310 10 3 31.5 36 35.4 75 8.1 19 140 160 75 004 001 9 A/C 3AE1 185-4... 000 310 10 3 31.5 36 35.4 75 8 1.5 19 110/ 150 008 001 9 L/C 3AE1 185-6... 500 310 10 3 31.5 36 35.4 75 8 1.5 19 110/ 150 008 001 9 L/C Standard acc. to IEC 671-100 Possible Not available as slide-in module 1) The weight of the fixed-mounted circuit-breaker with drawout element increases by the values specified in the dimension drawing of slide-in module, page 55 48 Siemens HG 11.0 008
Technical Data Electrical data, dimensions and weights 1 kv 60 Hz Order No. Rated normal current Width across flats Pole-center distance Rated operating sequence: O-3min-CO-3min-CO O-0.3s-CO-3min-CO O-0.3s-CO-15s-CO Rated duration of short-circuit Rated short-circuit breaking current DC component in % of the rated short-circuit breaking current Asymmetrical breaking current Rated short-circuit making current (at 60 Hz) Rated lightning impulse Rated short-duration power-frequency Voltage drop ΔU between connections (according to IEC 60694 at DC 100 A) Minimum creepage distance, interrupter Minimum creepage distance, phase-to-earth Minimum clearance, phase-to-phase Minimum clearance, phase-to-earth Weight 1) (fixed-mounted circuit-breaker/slide-in module) Detailed dimension drawing (has to be ordered) Operating cycle diagram no. (see below) Catalog dimension drawings (see pages 54) (fixed-mounted circuit-breaker/slide-in module) I r t k I sc I ma U p U d A mm mm s ka % ka ka kv kv mv mm mm mm mm kg 3AE1 186-... 150 310 10 3 40 36 44.9 100/ 104 3AE1 186-4... 000 310 10 3 40 36 44.9 100/ 104 3AE1 186-6... 500 310 10 3 40 36 44.9 100/ 104 3AE1 186-7... 3150 310 10 3 40 36 44.9 100/ 104 3AE1 545-... 150 75 160 3 31.5 36 35.4 3AE1 575-... 150 75 10 3 31.5 36 35.4 3AE1 575-6... 500 75 10 3 31.5 36 35.4 3AE1 576-... 150 75 10 3 40 36 44.9 100/ 104 3AE1 576-4... 000 75 10 3 40 36 44.9 100/ 104 3AE1 576-6... 500 310 10 3 40 36 44.9 100/ 104 3AE1 576-7... 3150 310 10 3 40 36 44.9 100/ 104 75 8 1.7 145 155 169 140 75 8 1.0 145 49 149 140 75 8 1.0 145 49 149 140 75 8 1.0 145 49 149 140 / 160 160/ 10 160/ 10 160/ 10 0070 001 0071 001 0071 001 0071 001 10 M/C 10 M/C 10 M/C 10 M/C 75 8.1 19 140 115 75 9 / 75 8.1 19 140 160 75 9 / 75 8 1.5 19 110/ 9 / 75 8 1.7 145 155 169 140 / 10 / 75 8 1.0 145 49 149 140 160/ 10 / 75 8 1.0 145 49 149 140 160/ 10 / 75 8 1.0 145 49 149 140 160/ 10 / 3 Standard acc. to IEC 671-100 Possible Not available as slide-in module 1) The weight of the fixed-mounted circuit-breaker with drawout element increases by the values specified in the dimension drawing of slide-in module, page 55 Operating cycle diagrams for 1 kv Operating cycle No. 0 000 10 000 5 000 000 1 000 500 00 180 100 80 50 0 6 8 10 10 0.5 1 5 ka 10 16 0 5 40 50 Breaking current (r.m.s. value) HG11-734_en eps The permissible number of electrical operating cycles is shown as a function of the breaking current (r.m.s. value). All SION vacuum circuit-breakers fulfil the endurance classes E, M and C according to IEC 671-100. The curve shape beyond the parameters defined in IEC 671-100 is based on average experience data. The number of operating cycles that can actually be reached can be different depending on the respective application. Operating cycle No. 0 000 10 000 5 000 000 1 000 500 00 100 50 0 7 9 10 0.5 1 5 ka 10 0 31.5 50 Breaking current (r.m.s. value) HG11-735_en eps Siemens HG 11.0 008 49
Technical Data Electrical data, dimensions and weights SION Vacuum Circuit-Breakers 17.5 kv 60 Hz Order No. Rated normal current Width across flats Pole-center distance Rated operating sequence: O-3min-CO-3min-CO O-0.3s-CO-3min-CO O-0.3s-CO-15s-CO Rated duration of short-circuit Rated short-circuit breaking current DC component in % of the rated short-circuit breaking current Asymmetrical breaking current Rated short-circuit making current (at 60 Hz) Rated lightning impulse Rated short-duration power-frequency Voltage drop ΔU between connections (according to IEC 60694 at DC 100 A) Minimum creepage distance, interrupter Minimum creepage distance, phase-to-earth Minimum clearance, phase-to-phase Minimum clearance, phase-to-earth Weight 1) (fixed-mounted circuit-breaker/slide-in module) Detailed dimension drawing (has to be ordered) Operating cycle diagram no. (see page 53) Catalog dimension drawings (see pages 54/55) (fixed-mounted circuit-breaker/slide-in module) I r t k I sc I ma U p U d A mm mm s ka % ka ka kv kv mv mm mm mm mm kg 3AE1 01-1... 800 05 150 3 1.5 36 14.9 31/ 33 95 38.1 19 75 37 150 0013 001 11 K/ 3AE1 01-... 150 05 150 3 1.5 36 14.9 31/ 33 95 38.1 19 75 37 150 0013 001 11 K/ 3AE1 0-1... 800 05 150 3 16 36 17.9 95 38.1 19 75 37 150 0013 001 1 K/ 3AE1 0-... 150 05 150 3 16 36 17.9 95 38.1 19 75 37 150 0013 001 1 K/ 3AE1 04-1... 800 05 150 3 5 36 8 95 38.1 19 75 37 150 0013 001 13 K/ 3AE1 04-... 150 05 150 3 5 36 8 95 38.1 19 75 37 150 0013 001 13 K/ 3AE1 05-1... 800 05 150 3 31.5 36 35.4 95 38.1 19 75 37 150 0013 001 14 K/ 3 3AE1 05-... 150 05 150 3 31.5 36 35.4 3AE1 11-1... 800 75 150 3 1.5 36 14.9 3AE1 11-... 150 75 150 3 1.5 36 14.9 31/ 33 31/ 33 95 38.1 19 75 37 150 95 38.1 19 75 14 150 95 38.1 19 75 14 150 0013 001 0014 001 0014 001 14 K/ 11 I/J 11 I/J 3AE1 1-1... 800 75 150 3 16 36 17.9 95 38.1 19 75 14 150 0014 001 1 I/J 3AE1 1-... 150 75 150 3 16 36 17.9 95 38.1 19 75 14 150 0014 001 1 I/J 3AE1 14-1... 800 75 150 3 5 36 8 95 38.1 19 75 14 150 0014 001 13 I/J 3AE1 14-... 150 75 150 3 5 36 8 95 38.1 19 75 14 150 0014 001 13 I/J 3AE1 15-1... 800 75 150 3 31.5 36 35.4 95 38.1 19 75 14 150 0014 001 14 I/J 3AE1 15-... 150 75 150 3 31.5 36 35.4 95 38.1 19 75 14 150 0014 001 14 I/J 3AE1 1-1... 800 310 150 3 1.5 36 14.9 31/ 33 95 38.1 19 75 190 150 0015 001 11 H/J 3AE1 1-... 150 310 150 3 1.5 36 14.9 31/ 33 95 38.1 19 75 190 150 0015 001 11 H/J 3AE1-1... 800 310 150 3 16 36 17.9 95 38.1 19 75 190 150 0015 001 1 H/J 3AE1 -... 150 310 150 3 16 36 17.9 95 38.1 19 75 190 150 0015 001 1 H/J 3AE1 4-1... 800 310 150 3 5 36 8 95 38.1 19 75 190 150 0015 001 13 H/J 3AE1 4-... 150 310 150 3 5 36 8 95 38.1 19 75 190 150 0015 001 13 H/J 3AE1 5-1... 800 310 150 3 31.5 36 35.4 95 38.1 19 75 190 150 0015 001 14 H/J 3AE1 5-... 150 310 150 3 31.5 36 35.4 95 38.1 19 75 190 150 0015 001 14 H/J 3AE1 31-1... 800 05 160 3 1.5 36 14.9 31/ 33 95 38.1 19 75 47 150 0019 001 11 G/ 3AE1 31-... 150 05 160 3 1.5 36 14.9 31/ 33 95 38.1 19 75 47 150 0019 001 11 G/ Standard acc. to IEC 671-100 Possible Not available as slide-in module 1) The weight of the fixed-mounted circuit-breaker with drawout element increases by the values specified in the dimension drawing of slide-in module, page 55 50 Siemens HG 11.0 008
Technical Data Electrical data, dimensions and weights 17.5 kv 60 Hz Order No. Rated normal current Width across flats Pole-center distance Rated operating sequence: O-3min-CO-3min-CO O-0.3s-CO-3min-CO O-0.3s-CO-15s-CO Rated duration of short-circuit Rated short-circuit breaking current DC component in % of the rated short-circuit breaking current Asymmetrical breaking current Rated short-circuit making current (at 60 Hz) Rated lightning impulse Rated short-duration power-frequency Voltage drop ΔU between connections (according to IEC 60694 at DC 100 A) Minimum creepage distance, interrupter Minimum creepage distance, phase-to-earth Minimum clearance, phase-to-phase Minimum clearance, phase-to-earth Weight 1) (fixed-mounted circuit-breaker/slide-in module) Detailed dimension drawing (has to be ordered) Operating cycle diagram no. (see page 53) Catalog dimension drawings (see pages 54/55) (fixed-mounted circuit-breaker/slide-in module) I r t k I sc I ma U p U d A mm mm s ka % ka ka kv kv mv mm mm mm mm kg 3AE1 3-1... 800 05 160 3 16 36 17.9 95 38.1 19 75 47 150 0019 001 1 G/ 3AE1 3-... 150 05 160 3 16 36 17.9 95 38.1 19 75 47 150 0019 001 1 G/ 3AE1 34-1... 800 05 160 3 5 36 8 95 38.1 19 75 47 150 0019 001 13 G/ 3AE1 34-... 150 05 160 3 5 36 8 95 38.1 19 75 47 150 0019 001 13 G/ 3AE1 35-1... 800 05 160 3 31.5 36 35.4 95 38.1 19 75 47 150 0019 001 14 G/ 3AE1 35-... 150 05 160 3 31.5 36 35.4 95 38.1 19 75 47 150 0019 001 14 G/ 3AE1 41-1... 800 75 160 3 1.5 36 14.9 31/ 33 95 38.1 19 75 4 150 000 001 11 F/ 3AE1 41-... 150 75 160 3 1.5 36 14.9 3AE1-1... 800 75 160 3 16 36 17.9 3AE1 -... 150 75 160 3 16 36 17.9 31/ 33 95 38.1 19 75 4 150 95 38.1 19 75 4 150 95 38.1 19 75 4 150 000 001 000 001 000 001 11 F/ 1 F/ 1 F/ 3 3AE1 44-1... 800 75 160 3 5 36 8 95 38.1 19 75 4 150 000 001 13 F/ 3AE1 44-... 150 75 160 3 5 36 8 95 38.1 19 75 4 150 000 001 13 F/ 3AE1 45-1... 800 75 160 3 31.5 36 35.4 95 38.1 19 75 4 150 000 001 14 F/ 3AE1 45-... 150 75 160 3 31.5 36 35.4 95 38.1 19 75 4 150 000 001 14 F/ 3AE1 51-1... 800 310 160 3 1.5 36 14.9 31/ 33 95 38.1 19 75 00 150 001 001 11 E/ 3AE1 51-... 150 310 160 3 1.5 36 14.9 31/ 33 95 38.1 19 75 00 150 001 001 11 E/ 3AE1-1... 800 310 160 3 16 36 17.9 95 38.1 19 75 00 150 001 001 1 E/ 3AE1 -... 150 310 160 3 16 36 17.9 95 38.1 19 75 00 150 001 001 1 E/ 3AE1 54-1... 800 310 160 3 5 36 8 95 38.1 19 75 00 150 001 001 13 E/ 3AE1 54-... 150 310 160 3 5 36 8 95 38.1 19 75 00 150 001 001 13 E/ 3AE1 55-1... 800 310 160 3 31.5 36 35.4 95 38.1 19 75 00 150 001 001 14 E/ 3AE1 55-... 150 310 160 3 31.5 36 35.4 95 38.1 19 75 00 150 001 001 14 E/ 3AE1 61-1... 800 05 10 3 1.5 36 14.9 31/ 33 95 38.1 19 75 1 150 005 001 11 D/ 3AE1 61-... 150 05 10 3 1.5 36 14.9 31/ 33 95 38.1 19 75 1 150 005 001 11 D/ 3AE1 6-1... 800 05 10 3 16 36 17.9 95 38.1 19 75 1 150 005 001 1 D/ 3AE1 6-... 150 05 10 3 16 36 17.9 95 38.1 19 75 1 150 005 001 1 D/ Standard acc. to IEC 671-100 Possible Not available as slide-in module 1) The weight of the fixed-mounted circuit-breaker with drawout element increases by the values specified in the dimension drawing of slide-in module, page 55 Siemens HG 11.0 008 51
Technical Data Electrical data, dimensions and weights SION Vacuum Circuit-Breakers 17.5 kv 60 Hz Order No. Rated normal current Width across flats Pole-center distance Rated operating sequence: O-3min-CO-3min-CO O-0.3s-CO-3min-CO O-0.3s-CO-15s-CO Rated duration of short-circuit Rated short-circuit breaking current DC component in % of the rated short-circuit breaking current Asymmetrical breaking current Rated short-circuit making current (at 60 Hz) Rated lightning impulse Rated short-duration power-frequency Voltage drop ΔU between connections (according to IEC 60694 at DC 100 A) Minimum creepage distance, interrupter Minimum creepage distance, phase-to-earth Minimum clearance, phase-to-phase Minimum clearance, phase-to-earth Weight 1) (fixed-mounted circuit-breaker/slide-in module) Detailed dimension drawing (has to be ordered) Operating cycle diagram no. (see page 53) Catalog dimension drawings (see pages 54/55) (fixed-mounted circuit-breaker/slide-in module) I r t k I sc I ma U p U d A mm mm s ka % ka ka kv kv mv mm mm mm mm kg 3AE1 64-1... 800 05 10 3 5 36 8 95 38.1 19 75 1 150 005 001 13 D/ 3AE1 64-... 150 05 10 3 5 36 8 95 38.1 19 75 1 150 005 001 13 D/ 3AE1-1... 800 05 10 3 31.5 36 35.4 95 38.1 19 75 1 150 005 001 14 D/ 3AE1 -... 150 05 10 3 31.5 36 35.4 95 38.1 19 75 1 150 005 001 14 D/ 3AE1 71-1... 800 75 10 3 1.5 36 14.9 31/ 33 95 38.1 19 75 1 150 006 001 11 B/C 3AE1 71-... 150 75 10 3 1.5 36 14.9 31/ 33 95 38.1 19 75 1 150 006 001 11 B/C 3AE1 7-1... 800 75 10 3 16 36 17.9 95 38.1 19 75 1 150 006 001 1 B/C 3 3AE1 7-... 150 75 10 3 16 36 17.9 3AE1 74-1... 800 75 10 3 5 36 8 3AE1 74-... 150 75 10 3 5 36 8 95 38.1 19 75 1 150 95 38.1 19 75 1 150 95 38.1 19 75 1 150 006 001 006 001 006 001 1 B/C 13 B/C 13 B/C 3AE1 75-1... 800 75 10 3 31.5 36 35.4 95 38.1 19 75 1 150 006 001 14 B/C 3AE1 75-... 150 75 10 3 31.5 36 35.4 95 38.1 19 75 1 150 006 001 14 B/C 3AE1 81-1... 800 310 10 3 1.5 36 14.9 31/ 33 95 38.1 19 75 160 150 007 001 11 A/C 3AE1 81-... 150 310 10 3 1.5 36 14.9 31/ 33 95 38.1 19 75 160 150 007 001 11 A/C 3AE1-1... 800 310 10 3 16 36 17.9 95 38.1 19 75 160 150 007 001 1 A/C 3AE1 -... 150 310 10 3 16 36 17.9 95 38.1 19 75 160 150 007 001 1 A/C 3AE1 84-1... 800 310 10 3 5 36 8 95 38.1 19 75 160 150 007 001 13 A/C 3AE1 84-... 150 310 10 3 5 36 8 95 38.1 19 75 160 150 007 001 13 A/C 3AE1 84-4... 000 310 10 3 5 36 8 95 38 1.5 19 110/ 150 009 001 13 L/C 3AE1 84-6... 500 310 10 3 5 36 8 95 38 1.5 19 110/ 150 009 001 13 L/C 3AE1 85-1... 800 310 10 3 31.5 36 35.4 95 38.1 19 75 160 150 007 001 14 A/C 3AE1 85-... 150 310 10 3 31.5 36 35.4 95 38.1 19 75 160 150 007 001 14 A/C 3AE1 85-4... 000 310 10 3 31.5 36 35.4 95 38 1.5 19 110/ 150 009 001 14 L/C 3AE1 85-6... 500 310 10 3 31.5 36 35.4 95 38 1.5 19 110/ 150 009 001 14 L/C Standard acc. to IEC 671-100 Possible Not available as slide-in module 1) The weight of the fixed-mounted circuit-breaker with drawout element increases by the values specified in the dimension drawing of slide-in module, page 55 Siemens HG 11.0 008
Technical Data Electrical data, dimensions and weights 17.5 kv 60 Hz Order No. Rated normal current Width across flats Pole-center distance Rated operating sequence: O-3min-CO-3min-CO O-0.3s-CO-3min-CO O-0.3s-CO-15s-CO Rated duration of short-circuit Rated short-circuit breaking current DC component in % of the rated short-circuit breaking current Asymmetrical breaking current Rated short-circuit making current (at 60 Hz) Rated lightning impulse Rated short-duration power-frequency Voltage drop ΔU between connections (according to IEC 60694 at DC 100 A) Minimum creepage distance, interrupter Minimum creepage distance, phase-to-earth Minimum clearance, phase-to-phase Minimum clearance, phase-to-earth Weight 1) (fixed-mounted circuit-breaker/slide-in module) Detailed dimension drawing (has to be ordered) Operating cycle diagram no. (see below) Catalog dimension drawings (see pages 54/55) (fixed-mounted circuit-breaker/slide-in module) I r t k I sc I ma U p U d A mm mm s ka % ka ka kv kv mv mm mm mm mm kg 3AE1 86-... 150 310 10 3 40 36 44.9 100/ 104 3AE1 86-4... 000 310 10 3 40 36 44.9 100/ 104 3AE1 86-6... 500 310 10 3 40 36 44.9 100/ 104 3AE1 86-7... 3150 310 10 3 40 36 44.9 100/ 104 95 38 1.7 145 49 169 140 95 38 1.0 145 49 149 140 95 38 1.0 145 49 149 140 95 38 1.0 145 49 149 140 / 160 160/ 10 160/ 10 160/ 10 0070 001 0071 001 0071 001 0071 001 15 M/C 15 M/C 15 M/C 15 M/C Standard acc. to IEC 671-100 Possible Not available as slide-in module 1) The weight of the fixed-mounted circuit-breaker with drawout element increases by the values specified in the dimension drawing of slide-in module, page 55 3 Operating cycle diagrams for 17.5 kv Operating cycle No. 0 000 10 000 5 000 000 1 000 500 180 00 100 80 50 0 1 13 15 10 0.5 1 5 ka 10 16 0 5 40 50 Breaking current (r.m.s. value) HG11-537b_en eps The permissible number of electrical operating cycles is shown as a function of the breaking current (r.m.s. value). All SION vacuum circuit-breakers fulfil the endurance classes E, M and C according to IEC 671-100. The curve shape beyond the parameters defined in IEC 671-100 is based on average experience data. The number of operating cycles that can actually be reached can be different depending on the respective application. Operating cycle No. 0 000 10 000 5 000 000 1 000 500 350 00 100 50 0 11 14 10 0.5 1 5 ka 10 1.5 0 31.5 50 Breaking current (r.m.s. value) HG11-541a_en eps Siemens HG 11.0 008 53
Technical Data Dimensions drawings for voltage levels 7. kv to 17.5 kv SION Vacuum Circuit-Breakers Dimension drawings for 7. to 17.5 kv 370 5 10 10 ca.93 HG11-519_en eps 370 5 10 10 57.5 517.5 ca.93 540 HG11-0_en eps 56.5 37.5 310 517.5 540 56.5 17.5 75 0 310 380 79 0 310 380 79 Dimension drawing A Dimension drawing B 30 10 100 47/ 1) 794 10 10 187 HG11-1a_en eps Width across flats mm Height mm a b 3 688/738 1) Dimension drawing C 43 7.5 345 b 86.5 a 7.5 310 905 75 850 1) for 40 ka 370 5 10 10 517.5 540 ca.93 56.5 17.5 05 HG11-_en eps 370 4 160 160 57,5 517.5 540 ca.93 56.5 37.5 310 HG11-3_en eps 0 310 380 79 0 310 380 79 Dimension drawing D Dimension drawing E 370 4 160 160 ca.93 HG11-4_en eps 370 4 160 160 517.5 540 56.5 17.5 75 ca.93 517.5 540 56.5 17.5 05 HG11-5_en eps 0 310 380 79 0 310 380 79 Dimension drawing F Dimension drawing G 54 Siemens HG 11.0 008
Technical Data Dimensions drawings for voltage levels 7. kv to 17.5 kv Dimension drawings for 7. to 17.5 kv 370 445 150 150 ca.93 HG11-6_en eps 370 445 150 150 57.5 517.5 540 56.5 37.5 310 517.5 ca.93 540 56.5 17.5 75 HG11-7_en eps 0 310 380 79 0 310 380 79 Dimension drawing H Dimension drawing I 30 10 100 47 594 150 150 147 HG11-8a_en eps Width across flats mm Height mm a b 310 905 341 b 66.5 a 75 850 688 710 Dimension drawing J 43 7.5 7.5 3 370 445 150 150 ca.93 517.5 540 HG11-9_en eps 370 5 10 10 56.5 17.5 05 581 517.5 ca.93 540 56.5 37.5 310 HG11-530_en eps 0 310 380 79 0 310 380 79 Dimension drawing K Dimension drawing L 600 50 0 10 10 350 450 Dimension drawing M 79 ca.93 540 37.5 310 HG11-531_en eps a c d HG11-589 eps 4 107 PCD a c d Weight 150 9 500 470 ca. 15 kg 160 9 500 470 ca. 15 kg 10 679 0 60 ca. 0 kg Height of drawout element: 60 PCD a c d Pole-center distance Width of drawout elements Total width across wheels Distance between wheels Dimension drawing of slide-in module Siemens HG 11.0 008 55
Technical Data Electrical data, dimensions and weights SION Vacuum Circuit-Breakers 4 kv 60 Hz Order No. Rated normal current Width across flats Pole-center distance Rated operating sequence: O-3min-CO-3min-CO O-0.3s-CO-3min-CO O-0.3s-CO-15s-CO Rated duration of short-circuit Rated short-circuit breaking current DC component in % of the rated short-circuit breaking current Asymmetrical breaking current Rated short-circuit making current (at 60 Hz) Rated lightning impulse Rated short-duration power-frequency Voltage drop ΔU between connections (according to IEC 60694 at DC 100 A) Minimum creepage distance, interrupter Minimum creepage distance, phase-to-earth Minimum clearance, phase-to-phase Minimum clearance, phase-to-earth Weight 1) (fixed-mounted circuit-breaker/slide-in module) Detailed dimension drawing (has to be ordered) Operating cycle diagram no. (see page 57) Catalog dimension drawings (see page 58) (fixed-mounted circuit-breaker/slide-in module) I r t k I sc I ma U p U d A mm mm s ka % ka ka kv kv mv mm mm mm mm kg 3AE1 31-1... 800 310 10 3 1.5 36 14.9 31/ 33 15 50.6 00 350 00 10 / 160 0050 001 16 N/P 3AE1 31-... 150 310 10 3 1.5 36 14.9 31/ 33 15 50.6 00 350 00 10 / 160 0050 001 16 N/P 3AE1 3-1... 800 310 10 3 16 36 17.9 15 50.6 00 350 00 10 / 160 0050 001 17 N/P 3AE1 3-... 150 310 10 3 16 36 17.9 15 50.6 00 350 00 10 / 160 0050 001 17 N/P 3AE1 3-4... 000 310 10 3 16 36 17.9 15 50.0 00 340 00 05 1 180 0051 001 17 N/P 3AE1 33-1... 800 310 10 3 0 36.4 15 50.6 00 350 00 10 / 160 0050 001 18 N/P 3AE1 33-... 150 310 10 3 0 36.4 15 50.6 00 350 00 10 / 160 0050 001 18 N/P 3 3AE1 33-4... 000 310 10 3 0 36.4 3AE1 33-6... 500 310 10 3 0 36.4 3AE1 34-1... 800 310 10 3 5 36 8 15 50.0 00 340 00 05 15 50.0 00 340 00 05 15 50.6 00 350 00 10 1 180 1 180 / 160 0051 001 0051 001 0050 001 18 N/P 18 N/P 19 N/P 3AE1 34-... 150 310 10 3 5 36 8 15 50.6 00 350 00 10 / 160 0050 001 19 N/P 3AE1 34-4... 000 310 10 3 5 36 8 15 50.0 00 340 00 05 1 180 0051 001 19 N/P 3AE1 34-6... 500 310 10 3 5 36 8 15 50.0 00 340 00 05 1 180 0051 001 19 N/P 3AE1 3-1... 800 310 75 3 16 36 17.9 15 50.6 00 350 10 / 180 00 001 17 R/T 3AE1 3-... 150 310 75 3 16 36 17.9 15 50.6 00 350 10 / 180 00 001 17 R/T 3AE1 3-4... 000 310 75 3 16 36 17.9 15 50.0 00 340 05 1 00 0053 001 17 S/T Standard acc. to IEC 671-100 Possible Not available as slide-in module 1) The weight of the fixed-mounted circuit-breaker with drawout element increases by the values specified in the dimension drawing of slide-in module, page 58 56 Siemens HG 11.0 008
Technical Data Electrical data, dimensions and weights 4 kv 60 Hz Order No. Rated normal current Width across flats Pole-center distance Rated operating sequence: O-3min-CO-3min-CO O-0.3s-CO-3min-CO O-0.3s-CO-15s-CO Rated duration of short-circuit Rated short-circuit breaking current DC component in % of the rated short-circuit breaking current Asymmetrical breaking current Rated short-circuit making current (at 60 Hz) Rated lightning impulse Rated short-duration power-frequency Voltage drop ΔU between connections (according to IEC 60694 at DC 100 A) Minimum creepage distance, interrupter Minimum creepage distance, phase-to-earth Minimum clearance, phase-to-phase Minimum clearance, phase-to-earth Weight 1) (fixed-mounted circuit-breaker/slide-in module) Detailed dimension drawing (has to be ordered) Operating cycle diagram no. (see below) Catalog dimension drawings (see page 58) (fixed-mounted circuit-breaker/slide-in module) I r t k I sc I ma U p U d A mm mm s ka % ka ka kv kv mv mm mm mm mm kg 3AE1 353-1... 800 310 75 3 0 36.4 3AE1 353-... 150 310 75 3 0 36.4 3AE1 353-4... 000 310 75 3 0 36.4 3AE1 353-6... 500 310 75 3 0 36.4 3AE1 354-1... 800 310 75 3 5 36 8 3AE1 354-... 150 310 75 3 5 36 8 3AE1 354-4... 000 310 75 3 5 36 8 3AE1 354-6... 500 310 75 3 5 36 8 3AE1 74-... 150 30 10 3 5 36 8 3AE1 754-6... 500 30 75 3 5 36 8 15 50.6 00 350 10 15 50.6 00 350 10 15 50.0 00 340 05 15 50.0 00 340 05 15 50.6 00 350 10 15 50.6 00 350 10 15 50.0 00 340 05 15 50.0 00 340 05 / 180 / 180 1 00 1 00 / 180 / 180 1 00 1 00 00 001 00 001 0053 001 0053 001 00 001 00 001 0053 001 0053 001 18 R/T 18 R/T 18 S/T 18 S/T 19 R/T 19 R/T 19 S/T 19 S/T 15 50.6 00 350 00 10 / 19 / 15 50.0 00 340 00 05 1 19 / 3 Standard acc. to IEC 671-100 Possible Not available as slide-in module 1) The weight of the fixed-mounted circuit-breaker with drawout element increases by the values specified in the dimension drawing of slide-in module, page 58 Operating cycle diagrams for 4 kv Operating cycle No. 0 000 10 000 5 000 000 1 000 500 00 150 100 50 0 16 18 10 0.5 1 5 10 1.5 0 ka 50 Breaking current (r.m.s. value) HG11-538b_en eps The permissible number of electrical operating cycles is shown as a function of the breaking current (r.m.s. value). All SION vacuum circuit-breakers fulfil the endurance classes E, M and C according to IEC 671-100. The curve shape beyond the parameters defined in IEC 671-100 is based on average experience data. The number of operating cycles that can actually be reached can be different depending on the respective application. Operating cycle No. 0 000 10 000 5 000 000 1 000 500 00 100 90 30 50 0 10 0.5 1 5 10 16 5 ka 50 Breaking current (r.m.s. value) 17 19 Siemens HG 11.0 008 HG11-5a_en eps 57
Technical Data Dimensions drawings for voltage level 4 kv SION Vacuum Circuit-Breakers Dimension drawings for 4 kv 0 570 10 10 ca.93 HG11-53 eps a 4 PCD a c d Weight 10 679 0 60 ca. 0 kg 75 879 850 0 ca. 5 kg Height of drawout element: 60 739 540 739 83 310 c 107 PCD a c d Pole-center distance Width of drawout element Total width across wheels Distance between wheels 58 360 468 69 d HG11-590 eps Dimension drawing N Dimension drawing of slide-in module 30 11 100 53 794 10 10 187 HG11-533b_en eps 3 0 700 75 75 ca.93 HG11-534 eps 0 700 75 75 739 540 739 83 310 739 540 739 83 310 485.5 1013 346 1040.5 33 310 Dimension drawing P 788 810 41.5 7.5 7.5 ca.93 HG11-535 eps 58 360 468 69 58 360 468 69 Dimension drawing R Dimension drawing S 30 11 100 53 994 75 75 485.5 1013 HG11-536b_en eps 346 1040.5 33 310 Dimension drawing T 788 810 41.5 7.5 7.5 58 Siemens HG 11.0 008
Technical Data Operating times, short-circuit protection of motors, consumption data of releases Operating times at rated voltage of the secondary circuit Vacuum circuit-breaker equipment Equipment of circuit-breaker Operating time Closing time < 75 ms Opening time 1 st shunt release < ms nd release < 50 ms Arcing time < 15 ms Break time 1 st shunt release < 80 ms nd release < ms Dead time 300 ms CLOSE/OPEN contact time 1 st shunt release < 75 ms nd release < 60 ms Minimum command duration Closing solenoid 45 ms 1 st shunt release 40 ms nd release 0 ms Pulse time for circuit-breaker tripping signal 1 st shunt release > 15 ms nd release > 10 ms Charging time for electrical operation <10 s Synchronism error between the poles ms Short-circuit protection of motors (fuse protection of drive motors) Rated voltage of the motor Operating voltage Power consumption of the motor Smallest possible rated current 1) of the m.c.b. (miniature circuit-breaker) with C-characteristic V max. V min. V W (at DC) VA (at AC) A 4 DC 6 0 350 8 48 DC 53 41 350 6 60 DC 66 51 350 4 110 DC 11 93 350 0 DC 187 350 1.6 110 AC 11 93 400 30 AC 44 187 400 1.6 3 1) The current inrush in the drive motor can be neglected due to its very short presence Consumption data of releases Release Power consumption Tripping ranges DC approx. W Operation at Tripping voltage Tripping voltage or tripping current AC 60 Hz approx. VA at DC at AC 60 Hz Closing solenoid 3AY15 10 140 140 85 to 110 % U 85 to 110 % U 1 st shunt release 140 140 70 to 110 % U 85 to 110 % U (without energy store) 3AY15 10 nd shunt release (with energy store) 3AY11 01 70 50 70 to 110 % U 85 to 110 % U Undervoltage release 3AY11 03 0 0 35 to 0 % U 35 to 0 % U Current-transformer operated release 3AX11 0 10 ) 90 to 110 % I a (rated normal current 0.5 A or 1 A) Current-transformer operated release 3AX11 04 (tripping pulse W 0.1 Ws) ) Consumption at pickup current (90 % of the rated normal current) and open armature Siemens HG 11.0 008 59
Technical Data Circuit diagrams SION Vacuum Circuit-Breakers Basic equipment X1 X1 1 -S1 -M1 A1 M 1= D -S 1 1 -K1 31 -K1 3 A1 -Y9 A 1 -S3 13 14 A1 -K1 11 A -S1 1 -S4 13 14 1 -Y1 A1 A -S1 3 4 HG11-505 eps -S1 11 13 1 14 1 3 4 31 3 33 34 41 43 51 53 61 63 44 54 6 64 HG11-506 eps Motor Closing and anti-pumping Signal closing 1 st shunt Auxiliary switch 6 NO + 6 NC operating for motor operating spring charged release mechanism stored-energy mechanism Additional equipment X0 X1 X0 X1 -X0 3 1 -S3 1 13 -K1 14 31 -K1 A1 3 -K1 11 A1 A -S1 -Y9 1 A 13 -S5 14 13 -S1 14 X1 X0 HG11-507 eps 13 -S6 14 11 13 1 3 31 33 41 43 51 53 61 63 71 73 81 83 91 93 101 103 111 113 11 13 -S1 1 14 4 3 34 44 54 6 64 7 74 84 9 94 10 104 11 114 1 14 HG11-508a eps X1 -X0 X0 Closing and anti-pumping Circuit-breaker Auxiliary switch 1 NO + 1 NC for motor operating tripping signal stored-energy mechanism Additional equipment: Releases (for possible combinations see chapter under Secondary equipment ) X0 X0 X0 X0 X1 X1 X1 X1 HG11-509 eps -Y7 D1 X1 X0 -Y -S1 A1 A 33 34 HG11-510 eps X1 X0 -Y4 A1 A HG11-511 eps nd shunt Current-transformer Low-energy current- Undervoltage release release operated release transformer operated 0.5 A or 1 A release 0.1 Ws Legend K1 Contactor (anti-pumping) M1 Motor operating mechanism R1 Resistance S1 Auxiliary switch S1 Mechanical interlocking S1 Position switches S (to de-energize the motor operating mechanism after charging S3 S4 S5 S6 X0 X1 X0 -Y6 A1 A HG11-51 eps Position switch (anti-pumping) Position switch (for closing spring charged) Electrical closing lock-out Circuit-breaker tripping signal Plug connector, 4-pole or 64-pole X1 X0 X1 Y1 Y Y4 Y6 D -S1 43 44 -R1 1 HG11-513 eps Terminal strip, 7-pole 1 st shunt release nd shunt release Current-transformer operated release (rated normal current 0.5 A or 1 A) Current-transformer operated release (tripping pulse W W 0.1 Ws) Y7 Undervoltage release Y9 Closing solenoid Abbreviations: NC Normally closed NO Normally open The circuit diagrams shown here are examples from the manifold possibilities of circuit-breaker wiring 60 Siemens HG 11.0 008
Annex Contents Contents Annex Page 61 Inquiry form Configuration instructions Configuration aid 6 63 Foldout page Brandenburg Gate, Berlin, Germany R-HG11-181.tif 4 Switchgear Factory in Berlin, Germany R-HG11-180.eps Siemens HG 11.0 008 61
Annex Inquiry form SION Vacuum Circuit-Breakers Please copy, fill in and return to your Siemens partneroryoucanuseourpromptedonline configurator under www.siemens.com/sion Inquiry concerning Technical data Other values SION standard circuit-breaker SION slide-in module Rated voltage Rated lightning impulse 7. kv 4 kv 60 kv 15 kv 1 kv 75 kv 17.5 kv 95 kv kv kv Please Submit an offer Call us Visit us Your address Company Dept. Name Street Postal code/city Phone Fax Rated short-duration power-frequency Rated short-circuit breaking current Rated normal current 0 kv kv 1.5 ka 5 ka 800 A 500 A 8 kv 50 kv 16 ka 31.5 ka 150 A 3150 A 38 kv 55 kv 0 ka 40 ka 000 A kv ka ka Pole-center distance 150 mm 160 mm 10 mm 75 mm Width across flats 05 mm 75 mm 310 mm Secondary equipment For possible combinations see pages 3 to 6 or 3 to 35 Circuit-breaker equipment (only for standard circuit-breaker) Fixed mounting With drawout element Drawout element, contact arms Drawout element, contact arms, bushings Motor operating mechanism VDC VAC, Hz Closing solenoid VDC VAC, Hz 1 st shunt release VDC VAC, Hz nd shunt release VDC VAC, Hz Current-transformer operated release Undervoltage release VDC AC V, Hz 4 E-mail Siemens AG Auxiliary switch 6NO+6NC 1 NO + 1 NC Low-voltage connection Mechanical interlocking Circuit-breaker tripping signal 7-pole terminal strip 4-pole plug 64-pole plug Dept. Electrical closing lock-out Name Operating instructions English German French Spanish Street Application and other requirements Postal code/city Fax Please check off _ Please fill in 6 Siemens HG 11.0 008
You prefer to configure your SION vacuum circuit-breaker on your own? Please follow the steps for configuration and enter the order number in the configuration aid. Alternatively you can also use our prompted online configurator under www.siemens.com/sion. For configuration of your SION vacuum circuit-breaker 1 3 4 5 6 7 8 9 10 11 1 13 14 15 16 Instruction for configuration of the SION vacuum circuit-breaker 3 A E 1 Z 1 st step: Definition of the primary part (see pages 15 to and pages 8 to 31) Please specify the following ratings: Possible options: Rated voltage (U r ) U r : 7. kv to 4 kv Rated lightning impulse (U p ) U p : 60 kv to 15 kv Rated short-duration power-frequency (U d ) U d : 0kVto55kV Rated short-circuit breaking current (I sc ) I sc : 1.5 ka to 40 ka Rated normal current (I r ) I r : 800 A to 3150 A Pole-center distance 150 mm to 75 mm Width across flats 05 mm to 310 mm These ratings define the positions 5 to 8 of the order number Seepage15or8 to page or 31 Seepage3or3 Seepage3or3 Seepage4or33 Seepage4or33 3 A E 1 + + + + + + + + 3 A E 1 Seepage5or34 Seepage5or34 Seepage6or35 Seepage6or35 Seepage7or36 nd step: Definition of the secondary equipment (see pages 3 to 6 and pages 3 to 35) + + + + + + + + Please specify the following equipment features: Possible options: 3 A E 1 Release combination (position 9) Closing solenoid (position 10) Operating voltage of the releases (positions 11 / 1) Installation accessories (position 13) Motor operating mechanism (position 14) Number of auxiliary contacts (position 15) Design of the control cable connection (position 15) Mechanical interlocking, circuit-breaker tripping signal (position 15) Language of the documentation (position 16) Frequency of the operating voltage of the secondary equipment at AC (position 16) These equipment features define the positions 9 to 16 of the order number Shunt release, current-transformer operated release and undervoltage release Operating voltages from 4 V DC to 40 V AC Operating voltages from 4 V DC to 40 V AC Fixed mounting; with drawout element, contact arms, contact system; slide-in module Operating voltages from 4 V DC to 40 V AC 6NO+6NC,1NO+1NC 7-pole terminal strip, 4-pole plug connector 64-pole plug connector With or without English, German, French, Spanish 50 Hz/60 Hz + + + + + + + + 3 A E 1 + + + + + + + + 3 A E 1 + + + + + + + + 3 A E 1 + + + + + + + + 3 rd step: Do you have any further requirements concerning the equipment? (Please refer to pages 7 and 36) Should you still need more options than the possible special equipment like halogen-free and flame-retardant or silicone-free version, condensation protection or an additional rating plate, etc., please contact your responsible sales partner. 3 A E 1 + + + + + + + + 3 A E 1 + + + + + + + + 3 A E 1 + + + + Siemens HG 11.0 008 63 + + + +
Published by and copyright 008: Siemens AG Energy Sector Freyeslebenstrasse 1 91058 Erlangen, Germany Siemens AG Energy Sector Power Distribution Division Medium Voltage Nonnendammallee 104 1363 Berlin, Germany www.siemens.com/sion For more information, please contact our Customer Support Center. Phone: +49 180 4 70 00 Fax: +49 180 4 4 71 (Charges depending on provider) E-mail: support.energy@siemens.com KG 08.08 0.0 66 En 6101/13187 10317 All rights reserved. If not stated otherwise on the individual pages of this catalog, we reserve the right to include modifications, especially regarding the stated values, dimensions and weights. Drawings are not binding. All product designations used are trademarks or product names of Siemens AG or other suppliers. If not stated otherwise, all dimensions in this catalogaregiveninmm. Subject to change without prior notice. The information in this document contains general descriptions of the technical options available, which maynotapplyinallcases.therequiredtechnical options should therefore be specified in the contract. Responsible for Technical contents: Siemens AG, E D MV C Berlin General editing: Siemens AG, E CC MCC R Erlangen www.siemens.com/energy R-HG11-1.tif