Section 25 Project Surplus Packages - Sales Item

Similar documents
Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963

ISV Series BF1BU. Industrial Floating Ball Valve Flanged Ends, Split Body Adjustable Stem Packing Design

Ball Valves. Quality Valves at Low Cost

Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6

Block & Bleed Valve.

Engineered Valves For Pipeline Service Application

Full Opening Swing CHECK VALVE - API 6D

BLOCK & BLEED VALVE. High Technology Valve & Fitting Series.

Condensed Valve Guide Gate Globe Check Ball Strainer. Warren Valve - Quality Since 1963

One and Two-Piece Carbon Steel Flanged Ball Valves Illustrated Index

Design & Technology in Valves

BALL VALVE DATA SHEET NO. 01 (150#)

BALL VALVES 4Evergreen Valve

Three Piece Forged Trunnion Mounted Ball Valve

RAIMONDI TRUNNION MOUNTED FULLY WELDED BALL VALVE FIGURE 5600

International Standard Valve, Inc. Trunnion Mounted Ball Valve

Industrial Threaded Ball Valves

Industrial Threaded Ball Valves (Includes socket weld & buttweld ends) Carbon & Stainless Steel

International Standard Valve, Inc. Trunnion Mounted Ball Valve

TRUNNION BALL VALVES. TBV 7.10

GWC Italia. Proven technology for individual valve solutions worldwide. flanged floating ball valves FBV-1002

TM SERIES Engineered Valves For Pipeline Service Application

we are very grateful to our valuable customers who have shown a deep attention on to KpLÕ s growth and extended generous supports.

PBV. Threaded and Socketweld Ball Valves P.B.V.

PRODUCT NEWS CAT.NO.-70 KPC CORPORATION FLOW CONTROL DIVISION

509F. Multi-Port Flanged Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial

Ball Valves. Seal Welded Style BVS2...2 Carbon Steel Technical Data 2200 PSI ¼ Stainless Steel Technical Data 2160 PSI ¼

Introduction. Application & Installation. Integral Block & Bleed Valves

BALL VALVE SERIES Electric actuator - El-O-matic

Stafford, Texas USA. 55,000 square feet ISO 9001:2008 API 6D CE/PED ISO/TS API Q1

CAST STEEL GATE VALVE

GWC Valve International

Trunnion Mounted Ball Valves

M Series Floating Metal Seat Ball Valve

GWC Italia. Proven technology for individual valve solutions worldwide FSV-1005

Ball valves class 150, 300, 400, 600, 800, 900,1500 and 2500 ANSI

TRUNNION MOUNTED BALL VALVES API 6D & API 6A. Side_Entry Ball Valve SE type

Trunnion Mounted Ball Valves

Ball Valves. DHV Industries, Inc. DHV Valve Company Inc Pegasus Drive Bakersfield, CA U.S.A. Phone: (661) Fax: (661)

SVF FLOW CONTROLS. Series # Flanged Standard Port Fire Safe / API th Edition. Performance Engineered I N C O R P O R A T E D

88A-100 Series. Carbon Steel ANSI Class 150 Flanged Std. Port Ball Valve - 1-1/2 through 2 STANDARDS COMPLIANCE STANDARD FEATURES

BALL VALVES AND ACTUATORS E-CATALOG

DM2500/2500 Series. Direct Mount 2 Piece Flanged Ball Valve STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES

Gate Valve (Model 1000)

505F. Multi-Port Ball Valve. Full Port ISO 5211 Mounting Pad. For Automated & Manual Service. General Chemical. Industrial

BALL valve FLOATING BALL VALVE

Trunnion Ball Valves

Trunnion Ball Valves

Features BALL VALVES. Split Wafer. Carbon steel wafer PN ANSI 600 STANDARD FEATURES FEATURES ON REQUEST

Fully Welded Ball Valves

Carbon Steel ANSI Class 150 Flanged Full Port Ball Valve -

BALL VALVE MODEL SCHEDULE ILLUSTRATION

Contents. G Series stainless steel ball valves. F Series flanged ball valves. C Series carbon steel ball valves. B Series brass/bronze ball valves

Cast Steel. Carbon and Stainless Steel Gate, Globe and Check Valves

GWC Italia. Proven technology for individual valve solutions worldwide HIGH PERFORMANCE BUTTERFLY VALVE HPB-1003

Standard-Low Emission Valves to 100 PPM. A-Series Brass Appliance Valves CSA Approved; 1 & 2 piece Body Designs; Threaded & Flare End connections

Mars Series 88 Stainless Steel Reduced Bore Or Full Bore Ball Valve, Lever Operated, BSP Or Socket Weld Ends

Control Valve. 3-Piece 30, 60, or 1/8" Slotted Port. General Chemical. Industrial. Power INLINE BALLVALVE.COM

GWC Italia. Proven technology for individual valve solutions worldwide THREADED AND SOCKET WELD FLOATING BALL VALVES SBV-1002

Solution Partner. Leak - Proof Flow & Control. Integral Block & Bleed Valves. W e. s u p p o r t. t h e. i n n o v a t i o n s. o f.

9400 Series. Top Entry Valves STANDARDS FEATURES & BENEFITS APPLICATIONS & INDUSTRIES

MADE OF STAINLESS...

KE Series. Through Conduit, Double Expanding Gate Valves

GLOBAL VALVE PRODUCTS GENERAL PRODUCTS BROCHURE A DIVISION OF THE GLOBAL GROUP, INC.

M21Fi ISO Ball Valve DN15 to DN150

Size : Ends : Min Temperature : Max Temperature : Max Pressure : Specifications : Carbon steel or stainless steel. Page 1

Series FS50 Fire Safe API 607 4th Edition Full Port Flanged Ball Valves

F20 Series Ball Valve Index

Suppliers to the worlds Oil and Petrochemical Industries

SUZHOU LETE VALVE CO.,LTD.

Two-Way Soft Seated Ball Valve Type 14-S

Forged 3 Piece Trunnion Mounted Ball Valves Series PL

SOFT SEATED TRUNNION MOUNTED BALL VALVES CSTS SERIES

L&T VALVES BUSINESS GROUP A

DOUBLE BLOCK AND BLEED VALVES

BALL VALVE SERIES Pneumatic actuator - Actreg

PRODUCT OVERVIEW. Our BDB (Bolted Body) and BW3 (Fully Welded Body) trunnion-mounted ball valves are designed and manufactured

MODEL NUMBER - VALVE SELECTION CODES

International Standard Valve, Inc. Slab and Expanding Gate Valves

The VALTORC 520-SN Series 3/4/5-Way Sanitary Ball Valve. Standard Features and Benefits. Specifications

3Z Rising Stem Ball Valves

FORTUNE BRASS, CARBON, STAINLESS STEEL BALL VALVES

M21Fi ISO Reduced Bore Firesafe API607 Ball Valve DN15 to DN150 Flanged PN40

SHARPE HIGH PERFORMANCE VALVES STANDARD FEATURES ADVANTAGES

The excellent performance of the pressure seal type range, is optimal in high pressure and high temperature applications.

NELES TRUNNION MOUNTED BALL VALVE SERIES D

Butterfly Valve. Resilient or Sleeved (Model 9400) Damper or Clearance (Model9300)

RAIMONDI. High pressure forged globe valves to guarantee the pressure envelope integrity on harsh services.

PBV Ball Valves. Two Piece Flanged Trunnion Supported Ball Valves. REQUEST A QUOTE SCHEDULE SERVICES

BALL VALVE SERIES Pneumatic actuator - El-O-Matic

(GATE, GLOBE, CHECK & BUTTERFLY)

Bulletin: Floating Ball Valve. Tartarini Floating Ball Valve. Introduction. Features and Benefits

Ref FIRE SAFE BALL VALVE ISO PN50 ANSI Model/Ref:

2 PIECES BALL VALVE PN63

TRUNNION MOUNTED BALL VALVES

Valves INC QTY 18" 1 16" 1 14" 1 14" 1 12" 1 12" 1 NO DB-BE3489-PI-0025-A1C

Double Block & Bleed Pipeline Ball Valves Taurus Series

T-Bar Bonnet. Monoflanges STANDARD OPTIONS. O.S.&Y. Bonnet (firesafe) Gas Solution Bonnet. Anti-Tamper Bonnet

Series 50 Full Port Flanged Ball Valves

w w w.fastwell.in FORGED STEEL VALVES GATE, GLOBE & CHECK PRESSURE CLASS: ASME SIZE RANGE : 1/4-3 API STANDARDS : 602 ASME B16.

Transcription:

Section 25 Project Surplus Packages - Sales Item 25010112 Project Unused Surplus Package. Valves, Pipe and Various Pipe Fittings in Carbon and Stainless Steel. All Certification available. Stored in Bulgaria DETAIL AS FOLLOWS: 1. Valve List 2. Piping List 3. Fitting List

1. VALVE LIST Item Size Rating Qty Details 1 2 3 4 5 6 1 DBB-8011 2" 300 1 2 DBB-8006 2" 300 1 3 DBB-047 3" 600 1 4 DBB-048 3" 600 1 5 DBB-043x1 6" 900 1 6 DBB-044x1 6" 900 1 7 DBB-045x1 6" 900 1 BALL VALVE, CL300 RF RB FLOATING BALL, SPRING LOADED METAL SEATS, LEVER OP, LF2 BODY, 316SS SURSULF NITRIDE COATING, STEM 17.4PH STEM, SEAT 316SS/SURSULF, GRAPHITE GLAND PACKING & GASKETS, BOLTING B7/GRADE 2H, NACE BALL VALVE, CL300 RF RB FLOATING BALL, SPRING LOADED METAL SEATS, LEVER OP, LF2 BODY, 316SS SURSULF NITRIDE COATING, STEM 17.4PH STEM, SEAT 316SS/SURSULF, GRAPHITE GLAND PACKING & GASKETS, BOLTING B7/GRADE 2H, NACE 3" Ball Valve class 600 RF FB Body & Ball 316SS stem 17/4PH Devlon Seats, Gland Packing & Gaskets Graphite Bolting B8/Gr 8 BS6755 API 6D Nace 3" Ball Valve class 600 RF FB Body & Ball 316SS stem 17/4PH Devlon Seats, Gland Packing & Gaskets Graphite Bolting B8/Gr 8 BS6755 API 6D Nace 6" Ball valve class 900 RTJ full bore Gear operated API 6D trunnion mounted. Double block and bleed NACE Firesafe BS6755, Antistatic and anti blow out proof stem. Design B16.34/API 6D See note on bleed size C90 6" Ball valve class 900 RTJ full bore Gear operated API 6D trunnion mounted. Double block and bleed NACE Firesafe BS6755, Antistatic and anti blow out proof stem. Design B16.34/API 6D See note on bleed size C90 6" Ball valve class 900 RTJ full bore Gear operated API 6D trunnion mounted. Double block and bleed NACE Firesafe BS6755, Antistatic and anti blow out proof stem. Design B16.34/API 6D See note on bleed size C90

Item Size Rating Qty Details 8 DBB-046x1 6" 900 1 9 DBB-068 8" 300 1 10 DBB-001x1 8" 300 1 11 DBB-002x1 8" 300 1 12 DBB-003x1 8" 300 1 13 DBB-001x1 8" 300 1 6" Ball valve class 900 RTJ full bore Gear operated API 6D trunnion mounted. Double block and bleed NACE Firesafe BS6755, Antistatic and anti blow out proof stem. Design B16.34/API 6D See note on bleed size C90 8" Ball Valve class 300 RF FB Gear operated EOL985 seals LF2 body/316ss ball/f51 stem Devlon seats BS6755 API 6D nace 8" Ball valve class 300 RF full bore Gear operatedapi 6D trunnion mounted Double block and bleed NACE Firesafe BS6755, antistatic and anti blow out proof stem. Design B16.34/API 6D See note on bleed size C30 See note 5 8" Ball valve class 300 RF full bore Gear operatedapi 6D trunnion mounted Double block and bleed NACE Firesafe BS6755, antistatic and anti blow out proof stem Design B16.34/API 6D See note on bleed size C30 See note 5 8" Ball valve class 300 RF full bore Gear operatedapi 6D trunnion mounted Double block and bleed NACE Firesafe BS6755, antistatic and anti blow out proof stem Design B16.34/API 6D See note on bleed size C30 See note 5 8" Ball valve class 300 RF full bore Gear operatedapi 6D trunnion mounted Double block and bleed NACE Firesafe BS6755, antistatic and anti blow out proof stem. Design B16.34/API 6D See note on bleed size C30 See note 5

Item Size Rating Qty Details 14 DBB-002x1 8" 300 1 15 DBB-003x1 8" 300 1 8" Ball valve class 300 RF full bore Gear operatedapi 6D trunnion mounted Double block and bleed NACE Firesafe BS6755, antistatic and anti blow out proof stem Design B16.34/API 6D See note on bleed size C30 See note 5 8" Ball valve class 300 RF full bore Gear operatedapi 6D trunnion mounted Double block and bleed NACE Firesafe BS6755, antistatic and anti blow out proof stem Design B16.34/API 6D See note on bleed size C30 See note 5 16 DBB-050 2pcs 3" 600 1 3" Ball Valve class 600 RF FB Lever Operated EOL985 seals Body LF2/316/F51 PTFCG API 6D Nace 17 DBB-057 1pcs 2" 1500 1 2" Ball valve class 1500 (same as class 900 RTJthis size and rating) API 6D trunnion mounted Double block and bleed (see notes) Bolted construction Body and ends A182 F316/ball and stem 316 Nylon seats AED orings NACE Firesafe BS6755 Antistatic and anti blow out proof stem Design B16.34/API 6D See note on bleed size S90 C30 RB 300 RF temp +180 OT151 Due to the operating temperature being stated as 151 metal seated option will give greater longevity in service. We offer fully rated valves for 180 degreec C split body reduced bore spring loaded metal seats anti blow out proof stem and anti static Bi-directional Firesafe to BS6755 Lever operated Body A350 LF2 ball 316SS ball coating sursulf nitride stem 17/4PH 316SS/sursulf notride seat gland packing and gaskets graphite Bolting B7/2H 18 VB-127 2" 300 1

Item Size Rating Qty Details 19 VB- 2" 300 1 C30 RB 300 RF temp +180 OT151 Due to the operating temperature being stated as 151 metal seated option will give greater longevity in service. We offer fully rated valves for 180 degreec C split body reduced bore spring loaded metal seats anti blow out proof stem and anti static Bi-directional Firesafe to BS6755 Lever operated Body A350 LF2 ball 316SS ball coating sursulf nitride stem 17/4PH 316SS/sursulf notride seat gland packing and gaskets graphite Bolting B7/2H 20 VB-356 4" 600 1 BALL VALVE, FB, TRUNNION MOUNTED, 2-PC, LEVER OP, LF2 BODY, TRIM F51, DEVLON SEAT 21 VB-221 2" 150 1 BALL VALVE, RB, RF FLOATING BALL, 1-PC-LEVER OP, WCB / 316 22 VB-199 2" 150 1 BALL VALVE, RB, RF FLOATING BALL, 1-PC-LEVER OP, WCB / 316 23 VB-411 2" 150 1 BALL VALVE, RB, FLOATING BALL, 1-PC-LEVER OP, WCB / 316 24 VB-302 2" 150 1 BALL VALVE, RB, RF FLOATING BALL, 1-PC-LEVER OP, WCB / 316 25 VB- 2" 150 1 BALL VALVE, RB, RF FLOATING BALL, 1-PC-LEVER OP, WCB / 316 26 VB- 2" 150 1 BALL VALVE, RB, RF FLOATING BALL, 1-PC-LEVER OP, WCB / 316 27 VB- 2" 150 1 BALL VALVE, RB, RF FLOATING BALL, 1-PC-LEVER OP, WCB / 316 28 VB- 2" 150 1 BALL VALVE, RB, RF FLOATING BALL, 1-PC-LEVER OP, WCB / 316 29 VB- 2" 150 1 BALL VALVE, RB, RF FLOATING BALL, 1-PC-LEVER OP, WCB / 316 30 VB- 2" 150 1 BALL VALVE, RB, RF FLOATING BALL, 1-PC-LEVER OP, WCB / 316 31 VB-217 1/2" 300 1 32 VB-214 1/2" 300 1 33 VB-178 1/2" 300 1 C30 RB 300 RFBall valves class 300 RF reduced bore floating ball design 1 piece construction Body material A216 WCB trim 316 Hypatite seats NACE Firesafe and anti static anti blow out proof stem Design BS5351 C30 RB 300 RFBall valves class 300 RF reduced bore floating ball design 1 piece construction Body material A216 WCB trim 316 Hypatite seats NACE Firesafe and anti static anti blow out proof stem Design BS5351 C30 RB 300 RF Ball valves class 300 RF reduced bore floating ball design 1 piece construction Body material A216 WCB trim 316 Hypatite seats NACE Firesafe and anti static anti blow out proof stem Design BS5351

Item Size Rating Qty Details 34 VB-249 1/2" 300 1 35 VB-297 2" 150 1 36 VB-295 2" 150 1 37 VB-287 2" 150 1 C30 RB 300 RFBall valves class 300 RF reduced bore floating ball design 1 piece construction Body material A216 WCB trim 316 Hypatite seats NACE Firesafe and anti static anti blow out proof stem Design BS5351 S15 RB either 150RF or NPTF This option for ANSI 150 RF flanged Ball valves reduced bore Floating ball design hypatite seats ASTM A351 CF8M Stainless steel body/f316 NACE Firesafe BS6755 Lever operated S15 RB either 150RF or NPTF This option for ANSI 150 RF flanged Ball valves reduced bore Floating ball design hypatite seats ASTM A351 CF8M Stainless steel body/f316 NACE Firesafe BS6755 Lever operated S15 RB either 150RF or NPTF This option for ANSI 150 RF flanged Ball valves reduced bore Floating ball design hypatite seats ASTM A351 CF8M Stainless steel body/f316 NACE Firesafe BS6755 Lever operated 38 VB-325 2" 150 1 39 VB-326 3/4" 150 1 40 VB-327 3/4" 150 1 41 VB-197 4" 300 1 42 VB-268 4" 300 1 BALL VALVE, RF, RB, SPLIT BODY, SPRING LOADED PCTFE SEATS, ANTI BLOW OUT STEM DESIGN, TRUNNION MOUNTED, ANTI STATIC DESIGN, BI-DIRECTIONAL, FIRESAFE BS 6755 PART 2, ANSI B16.10 LONG PATTERN, LEVER OP, 316SS BODY & BALL, 17.4PH SS STEM, 316SS/PCTFE SEAT, GRAPHITE GLAND PACKING AND GASKETS, BOLTING B8/GRADE 8, NACE C15 RB 150 RF Ball valve class 150 RF reduced bore one piece construction floating ball design Lever operated Body A216 WCB trim 316/CF8M Hypatite seats NACE Firesafe and anti static anti blow out proof stem BS5351 C15 RB 150 RFBall valve class 150 RF reduced bore one piece construction floating ball design Lever operated Body A216 WCB trim 316/CF8M Hypatite seats NACE Firesafe and anti static anti blow out proof stem BS5351 C30 RB 300 RF (hold 5)Ball valves class 300 RF reduced bore floating ball design 1 piece construction Body material A216 WCB trim 316 Hypatite seats NACE Firesafe and anti static anti blow out proof stem Design BS5351 C30 RB 300 RF(hold 5)Ball valves class 300 RF reduced bore floating ball design 1 piece construction Body material A216 WCB trim 316 Hypatite seats NACE Firesafe and anti static anti blow out proof stem Design BS5351

Item Size Rating Qty Details 43 VB-132 6" 300 1 C30 RB 300 RF temp +180 OT50Ball valves class 300 RF reduced bore floating ball design 1 piece construction Body material A216 WCB trim 316 Hypatite seats NACE Firesafe and anti static anti blow out proof stem Design BS5351 44 VB-8037 8" 300 1 BALL VALVE, CL300 RF RB FLOATING BALL, SPRING LOADED METAL SEATS, GEAR OP, LF2 BODY, 316SS SURSULF NITRIDE COATING, STEM 17.4PH STEM, SEAT 316SS/SURSULF, GRAPHITE GLAND PACKING & GASKETS, BOLTING B7/GRADE 2H, NACE 45 VB-8034 8" 300 1 46 VB-175 1/2" 300 1 47 VB-246 1/2" 300 1 48 VB-014 3/4" 300 1 49 VB- 3" 150 1 50 VB- 3" 150 1 51 VC-008 6" 300 1 52 VC-022 6" 150 1 BALL VALVE, CL300 RF RB FLOATING BALL, SPRING LOADED METAL SEATS, GEAR OP, LF2 BODY, 316SS SURSULF NITRIDE COATING, STEM 17.4PH STEM, SEAT 316SS/SURSULF, GRAPHITE GLAND PACKING & GASKETS, BOLTING B7/GRADE 2H, NACE C30 RB 300 RF Ball valves class 300 RF reduced bore floating ball design 1 piece construction Body material A216 WCB trim 316 Hypatite seats NACE Firesafe and anti static anti blow out proof stem Design BS5351 C30 RB 300 RFBall valves class 300 RF reduced bore floating ball design 1 piece construction Body material A216 WCB trim 316 Hypatite seats NACE Firesafe and anti static anti blow out proof stem Design BS5351 C30 RB 300RF temp +150 OT60 Ball valves class 300 RF reduced bore floating ball design 1 piece construction Body material A216 WCB trim 316 Hypatite seats NACE Firesafe and anti static anti blow out proof stem Design BS5351 3" Ball valve class 150 RF FB Lever Operated LF2 body/316ss ball 17/4PH stem/ball & seats with sursulf nitride coating graphite gland packing & gaskets 3" Ball valve class 150 RF FB Lever Operated LF2 body/316ss ball 17/4PH stem/ball & seats with sursulf nitride coating graphite gland packing & gaskets Swinged check valve flanged class 300 RF. Bolted cover A216 WCB body and cover 316 full stellite trim. NACE. Kltz manufacture C30 Swinged check valve flanged class 150 RF. Bolted cover A216 WCB body and cover 13% chrome hard faced seats. NACE Kltz manufacture C15 53 VC-013 6" 900 1 Swinged check valve flanged class 900 RTJ. A352 LCC/ 316 full stellite trim. NACE. PK manufacture C90

Item Size Rating Qty Details 54 VC-014 6" 900 1 Swing check valve flanged class 900 RTJ. A352 LCC/ 316 full stellite trim. NACE. PK manufacture C90 55 VC-021 3" 300 1 Swing check valves class 600 RF bolted cover Body A216 WCB Trim 16 Kitz manufacture 56 VG-021 2" 300 1 Globe Valves BB OS+Y plug type dlsc. Body material A216 WCB cast standard carbon steel ends flanged ANSI 300 RF Trim API Number 5.13% chrome with hard faced seats and plug. Design ANSI B16.34 and BS1873. Shell wall thickness API 600. NACE CE/PED compliant

2. PIPE LIST Item Size Rating Qty (Metres) Type of steel 1 Pipe 1/2" 160 19,5 A 106 GR.B 2 Pipe 14" 20 12 A 106 GR.B 3 Pipe 2" 80 204 A 106 GR.B 4 Pipe 2" 160 143 A 106 GR.B 5 Pipe 3" 80 27 A 106 GR.B 6 Pipe 3" 40 120 A 106 GR.B 7 Pipe 3/4" 160 25,5 A 106 GR.B 8 Pipe 4" 40 60 A 106 GR.B 9 Pipe 4" 80 115 A 106 GR.B 10 Pipe 6" 120 456 A 106 GR.B 11 Pipe 6" 40 252 A 106 GR.B 12 Pipe 8" 40 169 A 106 GR.B 13 Pipe 16" 10S 3 SS 14 Pipe 4" 10S 48 SS

3. FITTING LIST Item Size Rating Qty Type of steel 1 2 3 4 5 6 57 Gasket 1" 300 16 58 Gasket 10" 300 8 59 Gasket 14" 150 4 60 Gasket 16" 150 2 61 Gasket 2" 150 135 62 Gasket 2" 3-600 237 63 Gasket 3" 3-600 36 64 Gasket 3" 150 9 65 Gasket 3/4" 300 9 66 Gasket 4" 600 9 67 Gasket 6" 600 32 68 Gasket 8" 300 10 69 Gasket 8" 150 6 70 Drip ring 2" 300 2 71 Drip ring 2" 600 2 72 Drip ring 8" 300 4 73 Eccentric Red. 3"/2" 40 2 74 Eccentric Red. 10"/6" 40 1 75 Eccentric Red. 10"/8" 40 2 76 Eccentric Red. 8"/6" 40 2 77 Weldolet 1"x1/2" 40 26 SS 78 Weldolet 16"x2" 10 5 SS 79 Weldolet 20"-16"x4" 10 3 SS 80 Flange 10" 150 1 SS 81 Blind Flange 10" 300 5 82 Blind Flange 2" 600 16 83 Blind Flange 2" 150 14 84 Blind Flange 2" 300 15 85 Blind Flange 2" 900 6 86 Blind Flange 3" 300 2 87 Blind Flange 4" 150 4 88 Blind Flange 4" 300 17 89 Blind Flange 4" 300 2 90 Blind Flange 4" 600 2 91 Blind Flange 4" 150 4 SS 92 Blind Flange 6" 150 3 93 Blind Flange 6" 300 2 94 Blind Flange 6" 900 1

Item Size Rating Qty Type of steel 95 Blind Flange 8" 300 3 96 Blind Flange 2" 150 1 SS 97 Blind Flange 14" 150 2 98 Blind Flange 16" 150 5 99 Blind Flange 2" 300 65 100 Blind Flange 4" 150 5 101 Blind Flange 6" 600 9 102 Sp.blind 2" 300 11 103 Sp.blind 3" 300 2 104 Sp.blind 6" 300 3 105 Sp.blind 8" 300 1 108 Elbow 45 6" 40 8 109 Elbow 45 8" 40 7 110 Elbow 45 16" 20 2 111 Elbow 45 3" 40 1 112 Elbow 45 4" 40 8 113 Elbow 90 16" 80 3 114 Elbow 90 8" 40 4 115 Elbow 90 10" 40 2 116 Elbow 90 14" 20 1 117 Elbow 90 2" 160 17 118 Elbow 90 2" 80 64 119 Elbow 90 3" 80 26 120 Elbow 90 3" 40 1 121 Elbow 90 4" 80 1 122 Elbow 45 6" 120 1 123 Elbow 90 4" 40 3 124 Elbow 90 6" 40 15 125 Elbow 90 6" 80 3 126 Elbow 90 6" 120 10 127 Elbow 10" 10 1 SS 128 Elbow 2" 10 1 SS 129 Elbow 3" 10 1 SS 130 Elbow 6" 10 11 SS 131 Con.Reducer 16"/10" 40 3 132 Reducer 6"x4" 10 5 SS 133 Con.Reducer 2"/1/1/2" 80 4 134 Con.Reducer 10"/4" 40 1 135 Con.Reducer 12"/8" 80 1 136 Con.Reducer 2"/3/4" 80/160 4 137 Con.Reducer 3"/1" 40 4 138 Con.Reducer 3"/2" 80 10

Item Size Rating Qty Type of steel 139 Con.Reducer 4"/3" 40/80 1 140 Con.Reducer 4"/3" 40 6 141 Con.Reducer 4"/2" 40 1 142 Con.Reducer 4"/1/1/2" 40/80 2 143 Con.Reducer 6"/3" 40 7 144 Con.Reducer 6"/4" 40 12 145 Con.Reducer 8"/4' 40 13 146 Con.Reducer 8"/6' 40 5 147 SS 4GUF8 26 SS 4GUM8-148 F8 18 149 Bolt 14x65 167 150 Bolt 16x110 417 151 Bolt 16x110 340 152 Bolt 16x115 19 153 Bolt 16x125 32 154 Bolt 16x85 248 155 Bolt 16x90 655 156 Bolt 16x95 20 157 Bolt 16x80 133 158 Bolt 20x100 18 159 Bolt 20x105 80 160 Bolt 20x110 24 161 Bolt 20x125 15 162 Bolt 20x145 40 163 Bolt 20x160 62 164 Bolt 24x140 81 165 Bolt 24x125 48 166 Bolt 24x145 4 167 Bolt 27x125 92 168 Bolt 27x160 108 169 Bolt 27x170 70 170 Bolt 27x200 21 171 Bolt 27x270 24 172 Bolt 30x190 62 173 Bolt 30x195 588 174 Reducer 2"x1" 40 1 SS 175 OBO RT610 FS 5 176 OBO RT630 FS 2 177 OBO RAA610 FS 1 178 OBO RAA620FS 3 179 CAP 4" 40 5

Item Size Rating Qty Type of steel 180 CAP 8" 40 4 181 CAP 1" 40 13 SS 182 Straight Tee 10" 40 1 183 Straight Tee 8" 40 6 184 Straight Tee 4" 10 11 SS 185 Straight Tee 4" 40 14 186 Straight Tee 3" 10 2 SS 187 Reducing Tee 3"x2" 10 1 SS 188 Straight Tee 14" 20 1 189 Straight Tee 16" 20 2 190 Straight Tee 2" 160 11 191 Straight Tee 2" 80 53 192 Straight Tee 3" 40 12 193 Straight Tee 3" 80 5 194 Straight Tee 6" 80 7 195 Straight Tee 6" 120 3 196 Reducing Tee 10"/8" 40 2 197 Reducing Tee 16"/10" 10S 1 SS 198 Reducing Tee 16"/6" 10S 5 SS 199 Straight Tee 4" 40 3 200 Reducing Tee 8"/6" 40 2 201 Reducing Tee 4"x2" 10 11 SS 202 Reducing Tee 3"/2" 80/40 10 203 Reducing Tee 3"/2" 80/160 9 204 Reducing Tee 6"/4" 40 1 228 SS 810-1-6 25 229 SS 810-9 70 230 2507-810-P 30 231 SS 810-3 100 232 Flange 3" 600 10 SS 233 Flange 4" 150 7 234 Flange 6" 900 79 235 Flange 8" 150 1 236 Flange 8" 40 14 237 Flange 18" 150 1 SS 238 Flange 16" 150 2 SS 239 Flange 1" 150 5 SS 240 Flange 1" 150 2 241 Flange 1" 300 10 242 Flange 1/2" 300 2 243 Flange 10" 300 5 244 Flange 12" 300 3

Item Size Rating Qty Type of steel 245 Flange 14" 150 1 246 Flange 16" 150 5 SS 247 Flange 16" 150 1 248 Flange 2" 150 2 SS 249 Flange 2" 150 6 250 Flange 2" 300 67 251 Flange 2" 150 96 252 Flange 2" 300 207 253 Flange 2" 600 64 254 Flange 2" 900 6 255 Flange 20" 150 2 256 Flange 3" 150 3 SS 257 Flange 3" 300 13 258 Flange 3" 150 4 259 Flange 3" 300 32 260 Flange 3" 600 7 261 Flange 4" 300 1 SS 262 Flange 4" 300 3 263 Flange 4" 150 19 264 Flange 4" 300 43 265 Flange 4" 600 2 266 Flange 3/4" 600 2 267 Flange 3/4" 160 2 268 Flange 6" 150 2 269 Flange 6" 300 30 270 Flange 6" 150 8 271 Flange 6" 300 39 272 Flange 8" 300 11 273 OBO RB90 610 FS 2 274 OBO RB90 620 FS 18 275 OBO RB90 630 FS 1

Notes: Purchase to be made in full for each or all sections above. All items subject to prior sale. Located in Bulgaria. Full Certification / Documentation Packages are available upon request. Price by Offer. Inspection arranged by Prior Appointment. Photographs available upon request.