Boyles C5/C5C Compact and powerful core drillg rig
Power and flexibility a compact design The /C5C surface core exploration drillg rig is compact, yet powerful. Its compact design makes it easy to position and tranport, even by helicopter. The sturdy and robust design enables contuous operation remote locations and harsh operatg environments. The rig breaks down to seven ma modules, the heaviest weighg 1 000 kg (2 200 lbs). ach module is equipped with liftg pots to ensure safe and effective helicopter transport. All drillg functions are performed, usg the ergonomic and user-friendly control panel which also displays all the drillg parameters necessary to ensure productive drillg. Ma benefits Small and compact. espite it s small and compact exterior, even allowg for helicopter transport, the /C5C provides the torque and RPM necessary for BOPO size corg, makg it the most powerful rig its class. Robust design. esigned for sturdess and operation harsh environments, the Boyles C5/C5C just goes on and on without terruption, mimizg service requirements. Safety. The rig is designed with safety md, mimizg the risk of personal jury durg operation. The rig is equipped with safety guard around the rotation unit which provides operators iwth operational safety. A sturdy mast and feed system ensures mimal vibration, straight bore holes and optimum liftg capacity. It can drill effectively from 45 to 90 degree angles. The three-piece, de-mountable mast adds further to the rig s excellent mobility. The rig is equiped with the urahead 2-gear drive rotation unit that provides the necessary torque and rpm speed ranges for corg and comes with an improved design of chuck and jaws. Tier III Cus enge is recognized for its durable life, efficient operation and capability to mimize fuel consumption even the toughest of drillg operations.
Second to none its drill class /C5C The /C5C guarantees high performance and productivity coupled with the service and support necessary to mata and ensure the rig s durability and contuous uptime. It is an affordable, fully hydraulic mache that takes a leadership position its drill class segment. + epth capacity Robustly designed down to the smallest component, the /C5C has a drillg depth capacity of 800 meters N-size (2 625 ft)makg it suitable for drillg at large depths remote locations. + rgonomics and Safety The rig is easy to operate usg an tuitive control panel. All drillg functions can be operated from the control panel. or example, you can make and break rods without manual tervention or beg close to any movg parts. + Productivity and lower operational costs very part and component is of the highest quality and standard, designed with ruggedness and durability md. The /C5C is synonymous with productive drillg, maximum uptime and low matenance requirements. Wirele hoist The wirele hoist has a high level of speed control to ensure safe and consistent operation. Rotation unit The rotation unit can handle BO-PO rods and BW-W casg. It consists of a hydraulic motor, a sealed gearbox, a hollow spdle and an Atlas Copco patented hydraulic chuck, and quick change chuck jaws. The rotation speed is adjustable from the control panel. Ma hoist The powerful ma hoist, equipped with a hydraulic motor and a dual brake system, ensures a well-controlled speed. The dual brake system offers both dynamic and static breakg. When the liftg operation is stopped, firm self-lockg is applied. epth capacity corg The below drill depth capacities only serve as guideles and refer to vertical down drillg. Atlas Copco cannot guarantee that these results can be achieved all drillg conditions. Meter eet B wirele 1 000 m 3 281 N wirele 800 m 2 625 wirele 500 m 1 640 P wirele 300 m 984 Rotation unit Model urahead 6M Power ydraulic motor variable speed/reversible al drive ear driven Spdle (ner diameter) 124 (4.9 ) Max torque 5 850 Nm Max speed 1 300 rpm Mast and feed system Atlas Copco Service Mg and Rock xcavation Service division optimizes delivery of quality spare parts, as well as superior service to all customers the mg and rock excavation dustry. We act as the most competent speakg partner matters regardg customers operations of their equipment. This enhances our customers productivity, profitability, and peace of md, ensurg successful sustaable busess relationships. eed travel 2.0 m (6.6 ft) eed speeds ast and slow with variable control Mast dump 0.42 m (1.4 ft) Thrust 59.6 kn (13 390 lb) Pull 107 kn (24 055 lb) rillg angle 45 to 90 degrees Rod pull length 6.09 m (20 ft) Rod clamp ydraulically open and close. asy-to-remove jaws, coon jaws from 56 to 117 Max diameter 210 (8.3 ) Max clampg diameter 117 (4.6 ) oldg capacity Up to 13 000 kg (29 000 lb) Optional rodholder (gas pressure) Type ydraulically opened, gas pressure locked Ma hoist Sgle le capacity Bare drum 69 kn (15 500 lb) Le speed Bare drum 39.7 m/m (130 ft/m) Cable size 27 m x 16 (88.6 ft x 10/16 )
Wirele hoist Capacity 1 500 m x 6, 1 850 m x 5 Le pull Bare drum 9.0 kn, full drum 2.4 kn Le speed Bare drum 126 m/m, full drum 484 m/m C 90 90 45 45 rill base supports Trailer mounted rig with two 770 wheels and towg package Support 4 mechanical jacks and can adjust rig height manually Pad diameter 200 Leg adjust range 550 B B A A Weight Complete rig 5 700 kg (12 566 lb) Trido 140 315 kg (695 lb) Standard equipment Mast three sections Spdle data Range selection: Manual control from operator s station ged head: Swg away Large crown sheave wheel Wear lers on lower mast Safety guards Ratio Speed, rpm Torque, Nm Low speed 17.55:1 90 200 5 850 2 670 igh speed 2.70:1 595 1 300 920 420 Control panel ydraulic rod holdg clamp C Workg dimensions ydraulic oil fill pump and filtration system Tier III diesel enge C Chuck assembly Type ydraulically opened, sprg closed Maximum side diameter 124 (4.6 ) oldg capacity 18 000 kg (39 600 lb) C imension A (45 drillg) 7 719 304 7 726 304 B (90 drillg) 10 112 398 10 119 398 C (45 drillg) 7 612 300 7 599 299 (90 drillg) 6 073 239 4 513 178 4 manual levelg jacks uel tank 200 l ydraulic system uel filter and water separator Primary pump 25 MPa (182 l/m) Secondary pump 20 MPa (135 l/m) Auxiliary pump 21.5 MPa (39 l/m) ydraulic oil coolg Air ydraulic mast raise Lightg kit M mergency-stop devices Spdle tachometer Power unit Manufacturer Cus Model QSB4.5 Tier III Volume 4.5 liter, 4 cylders Power 119 kw RPM 2 200 rpm nge type iesel turbocharged, air-to-air charge air cooled ydraulic mud pump, Trido 140, 140 l/m / 7 MPa Coolg Water Water flow meter lectrical system 24 V Optional equipment as pressure rod holder ydraulic mud mixer L L I Tool kit Transport dimensions C imension 6 073 239 4 513 178 2 138 84 2 146 85 330 13 287 11 3 202 126 3 331 131 417 16 387 15 I 1 947 77 220 9 300 12 2 160 85 2 134 84 L (cl. wheels) 2 200 87 2 594 102 M 2 356 98
6991 1808 01d, 2017-06 Nanjg, Cha. Legal Notice Copyright 2017, Atlas Copco Construction and Mg quipment Co., LT. Any unauthorized use or copyg of the contents or any part thereof is prohibited. Illustrations and photos may show equipment with optional extras. No warranty is made regardg specifications or otherwise. Specifications and equipment are subject to change without notice. Consult your Atlas Copco Customer Center for specific formation. Coitted to sustaable productivity We stand by our responsibilities towards our customers, towards the environment and the people around us. We make performance stand the test of time. This is what we call Sustaable Productivity. www.atlascopco.com