Advanced Foundation Technology and Equipment

Advanced Foundation Technology and Equipment Tel. 0039 0421 325077-8 - Fax 0039 0421 325079 e-mail: ncb1@dacos.it URL: www.ncbinternational.net

FOUNDATION EQUIPMENT Pile & Micro-Pile Hydraulic Rotary Rigs Casing Oscillators Casings and Casing Joints Hammer Grabs Drilling Tools Rotary Heads Hydraulic Crawler Drills Drill Rigs Truck Mounted Diaphragm Diaphragm Grabs Hydraulic Kelly Water-Stop Special Equipment Hydraulic Power Packs Desanders Wick Drain Stickers

HYDRAULIC CRAWLER DRILLS Our range of hydraulic crawler drills are designed for small to medium size drilling applications up to a maximum diameter of 600 mm. The drills are built on a robust base carrier and the best components available on the international market for outstanding performance and reliability. The drills are ready for a wide range of different applications such as micro-piles, anchor, ground consolidation, jet-grouting, geothermic energy etc. Due to different articulations our crawler drills permit an optimum drilling position for even the most demanding job site conditions and are suited to carry out following drilling works: with or without casings, roller bits, drag bits or core barrels, DTH hammers, top hammers (drifter), double rotary head, jet-grouting system, etc. Description FD 800 FD 1200 FD 1800 FD 2000 Diesel engine DEUTZ BF 4L 1011 DEUTZ BF6M 1013 C DEUTZ TCD 2013 L6 DEUTZ TCD 2013 L6 Power kw 51 148 190 190 Rotary torque (T2) kgm 990 -------------------------- 800 2500 Rotation (T2) r.p.m. 0-100 -------------------------- 0 90 0 100 Rotary torque (T3) kgm -------------------------- 1200 1800 -------------------------- Rotation (T3) r.p.m. -------------------------- 0 72 0 113 -------------------------- Mast length mm 2250 3250 6500 8000 10000 Rotary stroke mm 2600 4000 7200 7200 Extraction force kg 2000 18000 20000 30000 Crowd force kg 2000 11000 20000 17000 Auxiliary winch kg 2500 3000 Clamps diameter mm Ø252 Ø305 Ø350 Ø350 Track length mm 2000 3300 3850 4150 Track width mm 700 1200 2450 2450 2500 Total weight kg 4500 16000 23000 31000 Optional Water Pump Water Pump Fassi Crane Auxiliary Winch We reserve the right to change technical specifications without prior notice. Water Pump Fassi Crane Rod Handling Water Pump Fassi Crane Rod Handling

HYDRAULIC CASING OSCILLATOR Hydraulic casing oscillators are used to drive and to extract large steel casings with diameters ranging from 800 to 2500 mm up to depths of 70 m. The required hydraulic power is supplied either by the excavating machine (hydraulic crawler crane or drilling rig) or by separate power pack. Oscillators for Crones type MGN (long version) Model/Maximum Diameter 1000 1200 1500 1800 2000 2200 2500 Minimum casing diameter mm 600 800 1000 1200 1200 1500 1500 Overall width mm 2100 2230 2500 3000 3160 3730 4050 Overall length mm 4900 5500 6330 7800 7970 8295 8500 Overall height mm 1450 1650 1730 2185 2185 2415 2585 Total weight without tilting device kg 8000 11000 13500 24000 26500 38000 42000 Lifting force kn 1261 1596 1973 3083 3335 4440 5366 Lifting stroke mm 500 600 600 700 700 700 800 Clamping force kn 830 1105 1300 2171 2537 2900 3650 Torque moment knm 1200 1695 2160 4870 5300 7560 9433 Braking force kn 266 266 266 435 435 600 645 Maximum pressure bar 320 320 320 320 320 320 320 Oscillators for Crones type MGB/MGC (short version) Model/Maximum Diameter 800 1000 1200 1500 800 1000 1200 Minimum casing diameter mm 400 600 800 1000 400 600 800 Overall width mm 1830 2000 2240 2500 1550 1660 2100 Overall length mm 3350 3450 3700 4400 2400 2560 3100 Overall height mm 1440 1440 1500 1545 1110 1110 1450 Total weight without tilting device kg 5000 6500 8000 11000 3500 4500 5500 Lifting force kn 1265 1265 1600 2175 956 956 1270 Lifting stroke mm 500 500 500 500 400 400 500 Clamping force kn 830 830 1100 1341 810 810 985 Torque moment knm 1110 1110 1540 2370 660 722 1140 Braking force kn 190 190 266 266 190 266 266 Hydraulic power required kw 70 70 110 110 70 70 70 Hydraulic power pack for all oscillator are also available We reserve the right to change technical specifications without prior notice.

CASING JOINTS (screw) Technical Data 600/40 700/40 800/40 900/40 1000/50 1200/50 1300/50 External diameter mm 600 700 800 900 1000 1200 1300 Internal diameter mm 520 620 720 820 900 1100 1200 Thickness mm 40 40 40 40 50 50 50 Single wall thickness mm 12 12 12 14 14 15 16 Double wall thickness mm 10+8 10+8 12+8 12+8 14+10 14+10 14+10 Height mm 530 530 530 530 530 590 590 Screw n 6 8 10 10 10 12 12 Threaded or conical bushes n 6 8 10 10 10 12 12 Centering keys n 2 2 2 2 2 4 4 Weight casing joint kg 275 324 373 422 649 786 854 Weight of casing single wall kg/m 174 204 233 306 340 438 506 Weight of casing double wall kg/m 283 333 414 468 643 778 846 Technical Datas 1500/50 1600/50 1800/60 2000/60 2200/60 2500/70 3000/75 External diameter mm 1500 1600 1800 2000 2200 2500 3000 Internal diameter mm 1400 1500 1680 1880 2080 2360 2850 Thickness mm 50 50 60 60 60 70 75 Single wall thickness mm 18 18 20 20 25 30 30 Double wall thickness mm 15+10 15+10 18+10 18+10 20+12 25+12 25+14 Height mm 590 590 590 590 610 610 610 Screw n 16 16 20 20 20 21 24 Threaded or conical bushes n 16 16 20 20 20 21 24 Centering keys n 4 4 5 5 5 7 8 Weight casing joint kg 991 1059 1427 1591 1815 2404 3100 Weight of casing single wall kg/m 658 702 878 976 1340 1826 2196 Weight of casing double wall kg/m 1008 1077 1426 1589 1899 2551 3287

HAMMER GRAB FOR PILES Applications: Our line of small to medium size hammer grabs is designed and manufactured to excavate circular piles from 1000 to 2000 mm diameter in a heavy wide range of soil conditions (sand, gravel, clay, sandstone and granite) with a cohesive value up to 15.000 kg/m 2 supported and operated by a single line or double line. BS Series For small to medium size piles, pull ratio 6:1, class 2 terrains Nominal jaw diameter mm 850 1050 1250 1550 1750 Feasible pile diameter mm 1000 1200 1500 1800 2000 Height with closed jaws mm 3570 3670 3850 4090 4290 Height with open jaws mm 3685 3835 4030 4370 4585 Rope diameter mm 24 24 24 30 30 Swivel capacity ton 10 10 10 10 10 Grab weight kg 3810 3980 4410 4980 5990 Weight of catching head kg 270 270 270 270 270 BSN-5 Series For medium size piles, pull ratio 5:1, class 3 terrains, smooth jaws Nominal jaw diameter mm 1050 1350 1630 1830 Feasible pile diameter mm 1200 1500 1800 2000 Height with closed jaws mm 4475 4635 4795 4885 Height with open jaws mm 4580 4780 4995 5125 Rope diameter mm 24 24 24 24 Swivel capacity ton 15 15 15 15 Grab weight kg 5420 6420 6890 8140 Weight of catching head kg 350 350 350 350 Class 1 terrains: 600-1000 kg/m 2. Class 2 terrains: 1000-2000 kg/m 2. Class 3 terrains: 2000-15000 kg/m 2 cohesive value. We reserve the right to change technical specifications without prior notice.

HAMMER GRAB FOR PILES (large) Applications: Our line of large hammer grabs is designed and manufactured to excavate circular piles from 1500 to 3000 mm diameter in a very wide range of soil conditions (sand, gravel, clay, sandstone and granite) with a cohesive value up to 15.000 kg/m 2 supported and operated by a single line crawler crane. BST-7 Series For large size piles, pull ratio 5:1, class 2-3 terrains, Bofors or Esco teeth Nominal jaw diameter mm 1750 1900 2200 Feasible pile diameter mm 2000 2200 2500 Height with closed jaws mm 5150 5200 5300 Height with open jaws mm 4900 4950 5050 Rope diameter mm 28 28 28 Swivel capacity ton 20 20 20 Grab weight kg 8190 8390 8790 Weight of catching head kg 360 260 360 BSA- 5 Series, class 1 terrains 7 Series, class 2-31 terrains Nominal jaw diameter mm 1350 1650 1850 2250 2750 Feasible pile diameter mm 1500 1800 2000 2500 3000 Height with closed jaws mm 4465 4705 4895 5870 6130 Height with open jaws mm 4600 5840 5015 5955 6260 Rope diameter mm 24 24 24 30 30 Swivel capacity ton 15 15 15 20 20 Grab weight kg 5960 6640 7130 10100 11850 Weight of catching head kg 130 350 350 500 500 Class 1 terrains: 600-1000 kg/m 2. Class 2 terrains: 1000-2000 kg/m 2. Class 3 terrains: 2000-15000 kg/m 2 cohesive value. We reserve the right to change technical specifications without prior notice.

DRILLING TOOLS Our line of drilling tools includes: Centrifugal bucket, clay bucket, clay double bottom bucket, cleaning bucket, rock bucket, rock double bottom bucket, clay auger, rock auger core barrel, continuous flight auger, hollow stem auger, soil displacement augers, casings, casing joints, cutting teeth, round shank carbide picks, etc HEART AUGER TRE Excavation diameter mm 600 700 800 900 1000 1200 1300 1500 Flight pitch mm 350 350 400 400 450 500 500 550 Overall height mm 2060 2060 2060 2060 2060 2160 2160 2160 Number of teeth 2 2 3 3 4 5 5 6 Weight kg 505 590 735 1000 1070 1250 1395 1770 Augers manufactured to customer specifications. ROCK AUGER TR-1 Excavation diameter mm 500 600 700 800 900 1000 1100 1200 1300 1500 Flight pitch mm 300 350 350 400 400 450 450 500 500 550 Overall height mm 1955 2155 2155 2155 2155 2155 2155 2255 2255 2255 Number of teeth 6 6 7 7 8 8 8 9 10 11 Weight kg 520 670 820 1010 1270 1390 1610 1870 2150 2870 Augers manufactured to customer specifications. CORE BARREL KR-3 Excavation diameter mm 500 600 700 800 900 1000 1100 1200 1300 1500 Overall height mm 1470 1470 147 1670 1670 1670 1670 1670 1670 1670 Number of bits 6 6 6 9 9 12 12 15 15 18 Weight kg 405 495 585 760 860 975 1070 1190 1295 1540 Augers manufactured to customer specifications. We reserve the right to change technical specifications without prior notice.

DRILLING TOOLS Our line of drilling tools includes: Centrifugal bucket, clay bucket, clay double bottom bucket, cleaning bucket, rock bucket, rock double bottom bucket, clay auger, rock auger core barrel, continuous flight auger, hollow stem auger, soil displacement augers, casings, casing joints, cutting teeth, round shank carbide picks, etc HEART BUCKET BR-E Diameter mm 500 600 700 800 900 1000 1100 1200 1300 1500 Overall height mm 2010 2210 2210 2210 2210 2210 2210 2210 2210 2210 Number of teeth 2 2 2 3 3 4 4 5 5 6 Weight kg 570 770 900 1110 1260 1440 1670 1880 2170 2600 Bucket manufactured to customer specifications. ROCK BUCKET BR1 Diameter mm 500 600 700 800 900 1000 1100 1200 1300 1500 Overall height mm 2010 2210 2210 2210 2210 2210 2210 2210 2210 2210 Number of bits 6 6 7 7 8 8 8 9 10 11 Weight kg 620 820 945 1160 1305 1485 1720 1925 2220 2645 Bucket manufactured to customer specifications. We reserve the right to change technical specifications without prior notice.

ROTARY HEADS Main applications: The hydraulic rotary heads are designed and built for heavy duty drilling work with continuous flight augers, DTH, rock bits, with hollow stem flight augers and with soil displacement augers. Main advantage: Wide range of torque from 400 to 25000 kgm Can be mounted to any leader of suitable strength Available for a wide range of drilling works Very robust and extremely reliable Variable speed and torque Micro - Piles Version Technical Datas T1 400 T2 1000 T2 2000 T2 4000 T3 2000 Torque Kgm 400 1000 2000 4000 2000 Rotation Speed r.p.m. 0-130 0-100 0-113 0-100 0-113 Piles Version Technical Datas T2 4000 T2 8000 T2 12000 T2 18000 T2 20000 T2 25000 Torque Kgm 4000 8000 12000 18000 20000 25000 Rotation Speed r.p.m. 10 55 10 50 8 26 8 23 8 23 5-38 Spin-Off Speed r.p.m. 75 70 145 145 145 145 We reserve the right to change technical specifications without prior notice.

HYDRAULIC ROTARY RIGS Our range of Rotary Rig are suitable for a lot type of job. Torque between 10 and 20 tons with some special Rigs equipped with a rotary head of 6 and 25 tons torque. Each machine can be equipped with CFA kit. Type FD 100 FD 120 FD 180 FD 200 FD 250 UNDERCARRIAGE Overall Length mm 4510 5190 5250 5250 5250 Track Shoe Width mm 600 700 700 700 800 Overall Width (Extended) mm 3700 3900 3900 3900 4500 Overall Width (Retracted) mm 2500 2500 2500 2500 2980 Ground Pressure Mpa 0.067 0.074 0.082 0.091 0.11 BASE MACHINE Type E 215 E 215 E 385 E 485 E 485 Diesel Engine CNH CNH ISUZU ISUZU ISUZU FABE8604B FABE8604B 6HKXABEB AA-6SD1XQY AA-6SD1XQY Installed Power Kw 118 @ 2150 rpm 118 @ 2150 rpm 185 @ 2100 rpm 250 @ 1950 rpm 250 a@1950 rpm HYDRAULIC PUMPS Main Pump l/min 2 X 210 2 X 195 2 X 200 2 X 285 2 X 370 Auxiliary Pumps l/min 22 140 140 195 195 Working Pressure bar 320 320 320 320 320 ROTARY TABLE Maximum Torque knm 100 120 180 200 250 Max Drilling Speed r.p.m. 30 28 25 23 23 Spin-Off Speed r.p.m. 137 140 145 145 145 Pull-Down Pull/Push kn 135 / 103 200 / 160 220 / 200 220 / 200 250/320 Pull-Down Stroke mm 3500 3500 5100 6700 6500 MAIN WINCH 1 st Layer Nominal Pull kn 100 120 180 200 230 1 st Layer Nominal Speed m/min 59 60 60 50 60 Rope Diameter mm 22 22 26 26 32 AUXILIARY WINCH 1 st Layer Nominal Pull kn 60 60 100 100 100 1 st Layer Nominal Speed m/min 55 40 55 55 70 Rope Diameter mm 16 17 20 20 20 PILE DIAMETER Max Pile Diameter mm 1200 1500 1800 2000 2000 Max Pile Depth m 40 48 49 49 49.5 C.F.A. Max Pile Depth m 16 16 18 22 22 Max Pile Depth (cleaner) m 14.2 14.2 16.2 20.2 21 Max Pile Diameter mm 600 600 800 1000 1200 Extraction Force kn 320 480 520 800 920 WEIGHT & DIMENSIONS Transport Width mm 2500 2500 2500 3000 3000 Transport Height mm 3242 3400 3400 3350 5200 Transport Length mm 12180 12410 12410 16500 17000 Operating Weight ton 33 42 58 68 75

HYDRAULIC ROTARY RIGS PICTURES Follow some pictures of previous Rigs FD 100

HYDRAULIC ROTARY RIGS PICTURES Follow some pictures of previous Rigs FD 120

HYDRAULIC ROTARY RIGS PICTURES FD 180

HYDRAULIC ROTARY RIGS PICTURES FD 200

HYDRAULIC ROTARY RIGS PICTURES FD 250

DRILL RIGS TRUCK MOUNTED Base Machine: IVECO AD190; Hydraulic Power Pack (Truck Mounted): Engine Type CUMMINS QSB 5.9; Power 178 kw @ 2200 r.p.m.; Hydraulic System Pumps (Brevini) 1 X 108 + 1 X 75 + 1 X 35 + 1X20 l/min; Hydraulic Oil Tank 500 l; Diesel Tank 300 l; Water Pump UDOR 200 (200 l/min); Drilling System: Mast Length 7000 mm; Rotary Heads Stroke 4300 mm; Pull Down (Cylinder) Push/Pull 14000/20000 kg; Clamps Blocking Ø max 360 mm; Clamping Force 16000 kg; Break-Out Ø max 360 mm; Clamping Force 16000 kg; Break-Out Force 18900 kg; Rotary Head T2 Maximum Torque 2045 danm; Maximum Speed 113 r.p.m.; Rotary Head T3 Maximum Torque 2045 danm; Maximum Speed 113 r.p.m.; Winches Main Maximum Pull 4300 kg; Auxiliary Maximum Pull 500 kg; Additional Installed Components: Preventer for drilling material exhaust, Mechanical-Hydraulic System fit for rods installation, Air-Water Swivel Weight (Truck + Drill) 20000 kg

HYDRAULIC DIAPHRAGM WALL GRAB Cable suspended grab 180 rotation device. The operator check trough the screen, the position of the grab inside the wall and can adjust the verticality by means of the electronic device. DIAPHRAGM SYSTEM HGV Minimum jaw width mm 600 Maximum jaw width mm 1500 Minimum jaw opening mm 2500 Maximum jaw opening mm 3500 Minimum width of guides mm 2430 Height with open jaws* mm 7300 * Value refered to rectangular section jaws of opening 3200mm Height with closed jaws* mm 8170 Rotation of grab 180 Verticality adjustment x,z Verticality adjustment angle ± 2 Maximum pressure bar 320 Hydraulic power pack Kw 132 HYDRAULIC GRAB HGV 3200/600-1200 HGV 3200/800-1500 Jaw width mm 600 800 1000 1200 800 1000 1200 1500 Jaw opening mm 3200 3200 3200 3200 3200 3200 3200 3200 Grab weight kg 10800 12000 13200 14400 12200 13400 14600 16400 Maximum closing force kn 1630 1630 1630 1630 2010 2010 2010 2010 Jaw opening/closing time Sec. 10/8 10/8 10/8 10/8 10/8 10/8 10/8 10/8 Excavation sets of intermediate dimensions to the above can be supplied on request. We reserve the right to change technical specifications without prior notice.

MECHANICAL DIAPHRAGM WALL GRAB HG type NCB Rope Mechanical Diaphragm Wall Grab Range, is been designed and manufactured for Diaphragm Wall Excavation in all soil conditions and can be equipped with a wild range of excavation set without grab body replacement. MAIN FEATURES HG- 80 110 150 Installable Excavation Set Rect/Semic Rect/Semic Rect/Semic Minimum Jaws Width mm 400 500 600 Maximum Jaws Width mm 800 1000 1200 Minimum Jaws Opening mm 2000 2500 2500 Maximum Jaws Opening mm 2500 3000 4000 Main Rope Diameter mm 26 28 32 Auxiliary Rope Diameter mm 26 28 32 Jaws Closing Force ton ~50 ~50 ~50 Weight kg 8000 11000 15000

MECHANICAL DIAPHRAGM WALL GRABS Our grabs are designed for rectangular or semicircular excavation of diaphragm or slurry walls. Grabs and guides are interchangeable on the same body for maximum flexibility. BF-9 Series Minimum crane capacity 40 tons, 2 winch, pull ratio 5:1, stabilizer available Jaw width mm 600 800 1000 1200 Minimum jaw opening mm 2000 2000 2000 2000 Maximum jaw opening mm 3500 3500 3500 3500 Minimum width of guides mm 1800 1800 1800 1800 Maximum width of guides mm 3300 3300 3300 3300 Rope diameter mm 24-26 24-26 24-26 24-26 Overall height with open jaws mm 4800 4800 4800 4800 Overall height with closed jaws mm 5470 5470 5470 5470 Jaw capacity l 1000 1300 1600 1900 Maximum closing force tons 23 25 28.5 30.5 Weight kg 6370 6920 7790 8390 BF-12 Series Minimum crane capacity 50 tons, 2 winch, pull ratio 5:1 Jaw width mm 800 1000 1200 1500 Minimum jaw opening mm 2000 2000 2000 2000 Maximum jaw opening mm 4000 4000 4000 4000 Minimum width of guides mm 1800 1800 1800 1800 Maximum width of guides mm 3800 3800 3800 3800 Rope diameter mm 28-30 28-30 28-30 28-30 Overall height with open jaws mm 7075 7075 7075 7075 Overall height with closed jaws mm 6820 6820 6820 6820 Jaw capacity l 1300 1600 1900 2400 Maximum closing force tons 38.5 41.35 46 51 Weight kg 10500 11500 12500 1400 We reserve the right to change technical specifications without prior notice.

MECHANICAL DIAPHRAGM WALL GRABS Our grabs are designed for rectangular or semicircular excavation of diaphragm or slurry walls. Grabs and guides are interchangeable on the same body for maximum flexibility. BF-5 Series Minimum crane capacity 22 tons, 2 winch, pull ratio 4:1 Jaw width mm 300 500 600 800 Minimum jaw opening mm 1500 1500 1500 1500 Maximum jaw opening mm 2500 2500 2500 2500 Minimum width of guides mm 1300 100 1300 1300 Maximum width of guides mm 2300 2300 2300 2300 Rope diameter mm 20-22 20-22 20-22 20-22 Overall height with open jaws mm 4145 4145 4145 4145 Overall height with closed jaws mm 4840 4840 4840 4840 Jaw capacity l 700 900 1000 1300 Maximum closing force tons 8 9 10 10.5 Weight kg 3350 3700 3860 4000 BF-6/L Series Minimum crane capacity 30 tons, 2 winch, pull ratio 5:1 Jaw width mm 500 600 800 1000 1200 Minimum jaw opening mm 2000 2000 2000 2000 2000 Maximum jaw opening mm 2500 2500 2500 2500 2500 Minimum width of guides mm 1800 1800 1800 1800 1800 Maximum width of guides mm 2300 2300 2300 2300 2300 Rope diameter mm 22-24 22-24 22-24 22-24 22-24 Overall height with open jaws mm 4120 4120 4120 4120 4120 Overall height with closed jaws mm 4760 4760 4760 4760 4760 Jaw capacity l 900 1000 1300 1600 1900 Maximum closing force tons 14.5 15 17 20 24 Weight kg 3910 4250 4830 5410 6190 We reserve the right to change technical specifications without prior notice.

HYDRAULIC KELLY Full guidance during excavation; Reels with an automatic device for the tensioning and recovery of the hydraulic flexible hoses; High closing force; Excavation sets of different dimensions and variable section; rectangular or semicircular are interchangeable on the same grab body; Hydraulic rotation of the grab by ±45 ; Mast mounted HGR Kelly can be powered by the hydraulic plant of the drilling rig; Crane mounted CHP 100K hydraulic power pack meant to actuate the HGG Kelly; Possibility to hydraulically correct the verticality of the telescopic shaft assembly independently of the position of the base machine. DIAPHRAGM SYSTEM HGR Minimum jaw width mm 400 Maximum jaw width mm 1200 Minimum jaw opening mm 2000 Maximum jaw opening mm 3000 Height with open jaws* mm 2620 Height with closed jaws* mm 3280 Rope diameter (2 nd line pull) mm 26 Maximum pressure bar 320 Maximum lifting/lowering speed m/min 35 HYDRAULIC GRAB HG 2500/500-1200 Jaw width mm 500 600 800 1000 1200 Jaw opening mm 2500 2500 2500 2500 2500 Grab weight kg 4000 4300 4900 5300 5900 Maximum closing force kn 1630 1630 1630 1630 1630 Excavation sets of intermediate dimensions to the above can be supplied on request. We reserve the right to change technical specifications without prior notice.

WATER STOP Our range of water-stop can be supply in various width and length and divided by foot element, intermediate element, male element and lifting-up element. WIDTH (mm) A (mm) B (mm) C (mm) D (mm) E (mm) L (mm) 500 450 355 200 228 194 3-6-9000 600 550 455 200 328 294 3-6-9000 800 740 578 248 325 370 3-6-9000 1000 940 778 248 525 570 3-6-9000 1200 1140 978 268 725 770 3-6-9000

HYDRAULIC POWER PACKS Technical Datas CHP 100 150 150K 150HD 200 200HD 250 Type of circuit Open Open Open Open Open Open Open Maximum Power kw 86 113 132 132 175 186 242 Maximum Speed r.p.m. 2500 2500 2500 2500 2200 2100 2100 Speed setting r.p.m. 2100 2100 2400 2100 2100 2100 2100 Fuel tank capacity l 325 325 325 325 400 400 400 Nominal delivery l/min 2X116 2X168 1X294 2X225 2X257 2X257 2X360 Maximum pressure bar 320 320 320 320 320 320 320 Hydraulic oil tank capacity l 560 560 560 900 1000 1000 1000 Width mm 1250 1250 1250 1280 1960 1960 1960 Length mm 3030 3030 3030 4300 5260 5260 5260 Height mm 2130 2130 2130 2130 2350 2350 2350 Weight kg 3000 3500 3000 4000 5500 6000 6500 Applications MGN 1000 MGN 1200 MGN 1500 The data may depending on the components installed. We reserve the right to change technical specifications without prior notice. HGV MGN 1500 HD MGN 1800 MGN 2000 MGN 2000 HD MGN 2200 MGN 2500 MGN 2500 HD MGN 3000

DESANDERS MODEL type NCB 60 E NCB 120 D NCB 120 E Efficiency m3 /h 60 120 120 Installed Power KW 25 55 30 Motor KW 11 Electric 66.5 Diesel 18.5 Electric Pump type PEMO A/O 603 WARMAN 4/3 C-AH PEMO K 125 WARMAN 4/3 C-AH PEMO K 125 Vibrators type OLI OLI OLI Centrifuge Separator mm Ø280 Ø390 Ø390 Main Screen mm 550 X 1600 OTP 4 X 20 650 X 1600 OTP 4 X 20 650 X 1600 OTP 4 X 20 Vertical Dryer Screen mm 550 X 300 650 X 300 650 X 300 OTP 1 OTP 1 Horizontal Dryer Screen mm 550 X 1200 650 X 1200 OTP 0.7 OTP 0.7 DIMENSIONS Height mm 2400 2500 2500 Width mm 1200 1500 1500 Total Length mm 3300 4400 4000 Weight Kg 1600 2500 2200 OTP 1 650 X 1200 OTP 0.7

VERTICAL DRAIN EQUIPMENT Self-erecting, excavator mounted, hydraulic PVD installation equipment. Insertion and extraction of the robust mandrill (manufactured in high tensile steel) is effected by means of a hydraulic winches which acts on a 2 nd line pull sheave transmission. Mast D-18 D-22 D-26 Maximum Length (1) mm 20000 24000 28000 Maximum drain installation depth mm 18000 22000 26000 Weight kg 8000 9000 10000 Hydraulic winches line pull t 10 10 10 Sheave transmission 2 2 2 Rope diameter mm 20 20 20 Performance Data Driving force (250 bar) kg 20000 20000 20000 Extraction force (250 bar) kg 20000 20000 20000 Hydraulic excavator (2) Power kw 165 190 210 Delivery l/min 280 280 280 Pressure bar 320 320 320 Operating weight kg 35000 40000 45000 (1) Including telescopic foot module; (2) Recommended features;

Tel. 0039 0421 325077-8 - Fax 0039 0421 325079 e-mail: ncb1@dacos.it URL: www.ncbinternational.net