FritsJurgens Concealed Pivot Door System Product Range Brochure

FritsJurgens Concealed Pivot Door System Product Range Brochure

About Bellevue and FritJurgens -90 0 90 For over 30 years, the name Bellevue Architectural has been synonymous with providing the latest in designer fittings from the European marketplace that create visual attraction and differentiation without compromising quality, design or affordability. Bellevue s products have been used all over Australia and New Zealand from small projects through to large (project pricing available). Bellevue s products are designed and manufactured by people from within the design industry, people who truly believe that design and quality is an integral part of creating something special and unique. Today Bellevue is proud to present the FritsJurgens range of concealed pivots. 100% Made in the Netherlands, they are used in a variety of applications both commercial and residential. The FritsJurgens concealed pivots are ideal for doors that need to blend into a wall and provide a clean look and feel. Aesthetically pleasing to the eye as they disappear once the door is closed, the FritsJurgens pivot system has won the prestigious 2017 Red Dot Design Award. Used in residential, commercial and industrial environments, FritsJurgens pivots are ideal for front entry doors, office doors and partition doors, just to name a few. Located in the Netherlands, FritsJurgens is considered a world leader in innovation, design & quality. No other concealed pivot of this type can compete with FritsJurgens technical product strengths, durability, longevity and cost. Page 2

product index SystemOne: Manual Concealed Pivot - 360Ø Free Swing FJS01MK - doors up to 500 kg & 4000mm wide (2000mm from pivot point) Pg. 4 System3: Fully Sprung Concealed Pivot - Hold Open, Self Close, 360Ø swing FJS316K - doors up to 40 kg & 1300mm wide (650mm from pivot point) Pg. 6 FJS320K - doors up to 70 kg & 1600mm wide (800mm from pivot point) Pg. 6 FJS324K - doors up to 110 kg & 2000mm wide (1000mm from pivot point) Pg. 6 FJS328K - doors up to 200 kg & 3000mm wide (1500mm from pivot point) Pg. 6 System 4: Fully Sprung Concealed Pivot - Hold Open, Self Close, 180Ø swing with brake FJS42SK - doors up to 150 kg & 4000mm wide (1500mm from piviot point) Pg. 8 In Situ Inspirational real life environments Pg. 10 Technical Drawings, Accessories and Spare Parts General technical information Pg. 30 Setting options - top and bottom pivots Pg. 32 Product dimensions Pg. 34 Optional products Pg. 39 Top pivot with cable grommet hole (ideal for indoor security cabling) Pg. 39 Top and bottom plate options Pg. 38 Bottom plate options Pg. 39 Parts Supplied Kit components Pg. 39 ARCHITECTURAL Page 3

SystemOne pivot overview The FritsJurgens SystemOne pivot stands out from other pivot systems in that all the technology is in the door. This makes the interface with the wall, floor and the ceiling subtle and stylish. No imposing floor plate to diminish the visual attraction of the door. Designed as a free swinging pivot, it s movement is from 0 through to a full 360 degrees. The SytemOne is unlike traditional manual pivot systems due to the fact it is fully embedded in the door. The SystemOne requires a minimum pivot point from the edge of the door of only 91mm. This gives a wider opening area than some traditional pivot solutions that need to be set further in from the edge of the door. By positioning the pivot in the centre of the door you can double the door s width, you can also achieve a full 360 swing. Creating diversity in the use of a pivot door within an environment. Brilliantly designed, SystemOne is unlike traditional pivots due to it being fully embedded in the door. There is no visible pivot hardware at the top or bottom of the door. An added benefit; there is nothing to rebate into the floor or ceiling. Saving significant time and money on installation. This key aesthetic and design element is unique to the FritsJurgens systems and is no accident. All the FritsJurgens pivot systems have been designed with this key feature in mind. Nothing to rebate in the floor or ceiling Very high bearing capacity Maintenance-free system Simple, fast fitting Ideal for hydronic heated floors Minimum door thickness 40mm (unit thickness 34mm) FritsJurgens SystemOne FritsJurgens SystemOne provides the required functionality for the fitting of a pivot door in a compact system. In contrast to the System3 and System4 this system does not have a closing mechanism or hold open positions. top pivot SystemOne comes with a 2 year manufactures guarantee Minimum pivot point: 91mm from door edge Product Code max door weight (kg) maximum door width (mm) FJS01MK 500 4000 (2000 from pivot point) Swing: 0 to 360 degrees bottom pivot ceiling plate floor plate Page 4

Page 5

System3 pivot overview The FritsJurgens System3 pivot stands out from other pivot systems in that all the technology is in the door. This makes the interface with the wall, floor and the ceiling subtle and stylish. No imposing floor plate to diminish the visual attraction of the door. Traditional spring pivots require you to push the door to nearly, if not 90 before the hold open activates, System3 only requires the door go beyond 45 for activation. By letting go at that point, System3 will automatically move the door into the hold open position by itself. The Self Close function works in reverse. By letting go before the door reaches 45, the door will self-close, it will move by itself back to its original position. For a 90 or 180 swinging door, minimum pivot point from the edge of the door is only 91mm. This gives a wider opening area than traditional pivot solutions that need to be set further in from the edge of the door. By positioning the pivot in the centre of the door you can double the door s width, you can also achieve a full 360 swing & utilize the Hold Open and the Self Close functions. Creating diversity in the use of a pivot door within an environment. Brilliantly designed, System3 is unlike traditional pivots due to it being fully embedded in the door. There is no visible pivot hardware at the top or bottom of the door. An added benefit; there is nothing to rebate into the floor or ceiling. Saving significant time and money on installation. This key aesthetic and design element is unique to the FritsJurgens systems and is no accident. All the FritsJurgens pivot systems have been designed with this key feature in mind. Nothing to rebate in the floor or ceiling Very high bearing capacity Maintenance-free system Simple, fast fitting Hold position at 0º, 90º, 180º and 270º Ideal for hydronic heated floors Minimum door thickness 40mm (unit thickness 34mm) FritsJurgens System3 FritsJurgens System3 is characterised by a hold-open position at 0º, 90º, 180º and 270º. This means that the door is spring-loaded and closes from each 45º in both directions and stops in the desired direction. top pivot System3 comes with a 2 year manufactures guarantee Minimum pivot point: 91mm from door edge ceiling plate Product Code max door weight (kg) maximum door weight at guaranteed closing force (kg) maximum door width (mm) FJS316K 500 to 40 1300 (650 from pivot point) FJS320K 500 to 70 1600 (800 from pivot point) FJS324K 500 to 110 2000 (1000 from pivot point) FJS328K 500 up to 200 3000 (1500 from pivot point) Swing: 0 to 360 degrees Hold Open - 0, 90, 180, 270 degrees Self close - at 45 degrees, within each 90 degree quadrant bottom pivot floor plate Page 6

Page 7

System4 pivot overview The FritsJurgens System4 pivot stands out from other pivot systems in that all the technology is in the door. This makes the interface with the wall, floor and the ceiling subtle and stylish. No imposing floor plate to diminish the visual attraction of the door. The System4 pivot has been designed to provide 0 to 90 for single swing doors or 0 to 180 movement for double action doors. In either case the door will always stay open with the built in Hold Open function set at 90 and -90. The System4 requires a minimum pivot point from the edge of the door of only 91mm. This gives a wider opening area than traditional pivot solutions that need to be set further in from the edge of the door. System4 incorporates an adjustable closing force feature, this feature allows you to increase and decrease the closing force / strength of the pivot, thus the speed of the door. If the door is moving too fast, simply increase the brake and it will slow down. An added benefit is that you do not need to bring the door down to make this adjustment. Using the Allen key supplied simply insert and twist. Brilliantly designed, System4 is unlike traditional pivots due to it being fully embedded in the door. There is no visible pivot hardware at the top or bottom of the door. An added benefit; there is nothing to rebate into the floor or ceiling. Saving significant time and money on installation. This key aesthetic and design element is unique to the FritsJurgens systems and is no accident. All the FritsJurgens pivot systems have been designed with this key feature in mind. 50 Nothing to rebate in the floor or ceiling Maintenance-free system Simple, fast fitting Damped closure Adjustable closing force Ideal for hydronic heated floors Minimum door thickness 50mm (unit thickness 45mm) FritsJurgens System4 FritsJurgens System4 stands out from other systems by virtue of the unique way in which the door closes. This pivot door system with infinitely variable closing force is suitable for doors up to 150kg. The system has a hold position at 90 and -90 degrees. System4 comes with a 2 year manufactures guarantee Minimum pivot point: 91mm from door edge top pivot ceiling plate Product Code max door weight (kg) maximum door weight at guaranteed closing force (kg) maximum door width (mm) FJS42SK 150 up to 150 4000 (1500 from pivot point) Swing: 90 to -90 (180) degrees Hold Open 90, 0, -90 degrees Soft close with variable closing speed Self close - let go before 88 degrees, within each 90 degree quadrant Hold open - push the door past 88 degrees, within each 90 degree quadrant Note: Consult with your builder and or door manufacture as to required door thickness before door is ordered. Recommended minimum door thickness is 50mm if factory fitted, thicker if done by hand. bottom pivot floor plate Page 8

Page 9

Page 10

Page 11

Page 12

Page 13

Page 14

Page 15

Page 16

Page 17

Page 18

Page 19

Page 20

Page 21

Page 22

Page 23

Page 24

Page 25

Page 26

Page 27

Page 28

Page 29

technical features The FritsJurgens pivot door system stands out because all the technology is fitted in the door. This makes the interface with the wall, floor ceiling subtle and stylish. It is a pivot door system with hold-open position at 0, 90, 180 and 270. FritsJurgens pivot door system can be used with swing doors and doors with a stop, up to a maximum weight of 500 kg and a maximum width of 2,000 mm from the pivot point to the end of the door. Wider doors are possible, closing force decreases. For particularly high doors, heavy doors and / or constant headwind or overpressure in closing doors, increase to one pivot door strength higher than usual. 40 N Nothing in the floor or in the ceiling 35 N 30 N 25 N 20 N 15 N 10 N 5 N 0 N 0 15 30 45 60 75 90 Self-closing hold positions 800 mm 900 mm 1000 mm 1100 mm 1200 mm All the door technology is fitted in the door not in the floor. The top pivot is also fitted in the door, no rebates need to be made in the ceiling. A beautiful door requires outstanding technology. Self-closing with a hold position every ninety degrees. Which means you no longer need spring latches, cranks, frames or slats. Very high bearing capacity It is technically possible to achieve high bearing capacities by using floating bearings that are manufactured using very wear-resistant polymers and are improved by the addition of reinforcement materials and solid lubricants geared precisely to each other. Which means that large pivot doors are not a problem. Maintenancefree system Thanks to the use of very high-quality materials the system is maintenance-free. Opened and closed one million times, equating to 136 years of intensive use. The system is also fully manufactured from materials with a high corrosion-resistance. Page 30

technical features The unique characteristics No devices need to be fitted in the structural framework Door can be fitted afterwards Minimum pivot point: 91mm from end of door Can be used in situations with underfloor heating All the main functions have been integrated Fully tested. Robust construction for doors weighing up to a max. of 500 kg Standard door thickness The FritsJurgens pivot door system can be used with doors upwards of 40mm thick. Standard doors, exceptional manufacture. Simple, fast fitting The use of the unique ceiling and floor plate makes the fitting of a pivot simple. FritsJurgens pivot doors are positioned between a floor plate and a ceiling plate that are fitted to the finished floor and the finished ceiling. Applicable on each floor The FritsJurgens pivot door stands on a floor plate 80mm and gives a pressure (FW) of 1 N/mm, oak has a compressive strength (Fw) of 50 N/mm. Common screeds have a minimum compressive strength ( Fw ) of 12 N/mm. For specific floors we refer to the specifications of the manufacturer. Every door - its own motor Every door has to work optimally regardless of the weight of the door or its size. So we have developed a mechanical drive unit in four different strengths so that every door up to 200kg remains in the hold position and closes with a good spring action. Every weight - its own motor. All variants of the System3- series have secured positions at 0, 90 and -90, the same geometry, and fit into the same slot in the door. The pivot door systems have a load capacity of 500 kg. Page 31

the pivot system 165 mm 143 mm 8 mm Page 32

setting options Bottom pivot 2,5 2,5 Loosen if the pivot is set off-centre, align door and then tighten. Securing bolts - standard for System3 & System4 Top pivot 5 mm 5 mm Allen key (5 mm) for mounting the door To the right = fitting To the left = removal Allen key (5 mm) for setting the hanging and closure joint To the right = door to the right To the left = door to the left Page 33

dimensions FJATC9001 Top pivot for SystemOne, System3 and Sytem4 10 10 41 35 6 13 34 15 milling drawing 76 71 85 80 165 dimensions around door 32 16.2 15 7 16.2 15 7 R5 R9.2 X = Door thickness in mm divided by 10 PPR80-B01 RVS 71 76 85.2 57 71 80.2 10 X Pivot point min. 91mm 44 34 10mm (2x) Ceiling plate FJPP6040T Floor plate FJVP8040B 34 30 30 40 70 80 R43 6 6 13 Draaipuntafstand minimaal 91mm Minimal pivot point distance 91 mm 16 4 6 20 20 10 60 30 30 20 20 41 2 32 143 9 42 9 7 8 Page 34

dimensions Bottom pivot for SystemOne 34 54 39 6 33 39 6 33 9 9 17 17 32 53 93 60 100 160 milling drawing dimensions around door 91mm 91mm 14.214.2 7 6 40 91mm X 13 R7.5 R17.2 7 R7.2 X = thickness of door in mm divided by 10 53 93 20 20 35.5 74 60.2 100.2 Page 35

dimensions Bottom pivot for System3 34 54 13 156 143 9 9 17 17 32 milling drawing dimensions around door 91mm 6 22 144 91mm X 91mm 13 R17.2 R10 R7.5 14.2 10 7 14.2 10 7 5 143 20 123 53 93 36 74 60 100 160 R12.5 R7.2 53 93 20 20 35.5 74 60.2 100.2 X = thickness of door in mm divided by 10 Page 36

dimensions 45 Bottom pivot for System4 45 4 4 198 68 68 62 198 68 68 62 12 12 22 22 44 58 76 83 108 90 115 205 Closing force can be set using the Allen key supplied milling drawing dimensions around door 91mm R10 90.2 66.2 40.2 22.7 22.2 12 4 34 69 Ø10 137 199 91mm 40 22.7 85.7 115.2 X 13 R23 22.2 12 X = thickness of door in mm divided by 10 83 108 Note: Consult with your builder and or door manufacture as to required door thickness before door is ordered. Recommended minimum door thickness is 50mm if factory fitted, thicker if done by hand. Page 37

optional products FJATC9101 Top pivot with 8mm cable grommet hole An addition to the existing FritsJurgens systems is the top pivot with cable grommet and associated ceiling plate. The pin or spindle has an 8mm hole, through which a cable can be fitted in the door. This extra functionality can be used, for example, for electric security or access control within the door.. With an 8mm hole for electrical cables 32 Ø15 41 35 6 13 34 19 1 31 Ø15 41 35 6 19 76 71 19 66 43 37 85 80 165 Ceiling plate FJPPK59T Ceiling plate FJVP6040TE Ceiling plate FJPPR80T Ø10 80 40 40 6 41 10 4 41 10 32 32 BUITENZIJDE outside Ø10 6 Ø80 60 20 R3 20 30 30 59 20 19 9 R3 62 R3 9 20 19 59 40 20 20 R3 13 15 13 13 13 40 40 12 36 12 Page 38

optional products Floor plate FJVPR80B Floor plate FJVP8352BE 28 28 83 FritsJurgens R32 FritsJurgens 6 143 32 16 29 23 52 R3 8 15 21 8 outside 7 20+X 20 X 22 20 20 22 80 22 20 20 22 Ø7 8 6 parts supplied Quantity Part Description 1 Item SERIES (1MK/316K/320K/324K/328K/42SK) Bottom pivot 1 Item FJATC9001 Top pivot 1 Item FJPP6040T Ceiling plate 1 Item FJVP8040B Floor plate 1 Item S01 Adjustment spanner 1 Item Fitting template 95 mm 1 Tube Fitting adhesive 1 Item Fitting instructions 1 Item Allen key - (custom lengths available) The Fritsjurgens System kits contains all the elements needed to hang 1 pivot door. Bottom pivot FJS BOTTOM PIVOT-SERIES (1MK/316K/320K/324K/328K/42SK) Top pivot FJATC9001 Floor plate FJVP8040B Ceiling plate FJPP6040T Fitting template Adjustment spanner Allen key Fitting adhesive S01 250 mm Page 39

by Bellevue Bellevue Architectural 954 Glenhuntly Road, Caulfield South, Victoria, Australia, 3162 Call Us Or Visit Our Web Site For Your Nearest Display Centre. Phone: +61 (0)3 9571 5666 Web: www.bellevuearch.com.au Fax: +61 (0)3 9571 1347 email: info@bellevuearch.com.au FritsJurgens System: Product Brochure V12017 This catalogue & products may be updated. Registered trademarks and patented designs. All rights reserved FritsJurgens & Bellevue Imports. Bellevue Imports P/L trading as Bellevue Architectural