Self-propelled sprayer HT 160 The self-propelled sprayer for your individual requirements
Self-propelled sprayer HT 160 Robust, strong, agile, designed for high performance the HT 160. With working widths up to 36m and tank sizes up to 8.000 liters for large area coverage. A self-propelled sprayer made for your individual requirements. Convince yourself of the innovative highlights... The hydraulic height adjustment Hydraulic height adjustment from 1,20 m to 1,60 m - your benefits: Adjust the height by pressing a button - the height adjustment from 1,20 m - 1,60 m Protects the stocks especially at flowering treatment in rape and phytosanitary measures in corn Always spray at the optimum time, regardless of the stock level This means higher yields and crop protection for you Independent suspension with hydropneumatic suspension for the best driving comfort The hydraulic track width adjustment Hydraulic track width adjustment from 1,80 m to 2,30 m Your profit: Continuous track width adjustment from 1,80 m to 2,30 m 1,8 m 2,3 m An advantage for contractors and farmers: Optimal utilization of the self-propelled sprayer in different crops with variable tracks Short downtimes continuous and rapid adjustment of the track comfortably out of the cabin The comfort cabine Relaxed leaving even after long working days - the comfort cabin Features: Overpressure cabine tested according cate- Comfortable and large-scale work Overpressure cabine tested according category 4 - EN 15695-1 gory 4 Excellent all-round visibility through large glass areas Vibration-free cabin and air suspension ensure a smooth ride Air suspended driver s seat Bräutigam-Trac-Control-touch display for innovative operation and control of the vehicle
The engine and traction drive Deutz-engine TCD 6.1 with 180 kw (245 HP), TIER IV The Deutz-engine - powerfull and efficient Automotive driving and cruise control Up to 50 kph with reduced diesel engine speed with approximately 1.700 RPM (40 kph with approximately 1350 RPM) Antistall against stalling of the engine Hydraulic fan drive, reversible and fuel-efficient The intelligent boom suspension Boom height management consisting of a parallelogram and mast - combining the best of both systems: Parallelogram and mast - combining the best of both systems Centre of gravity is at any time close to the Suspension comfort via the parallelogram vehicle Maximum lifting height with mast plus parallelogram Height adjustment by automatic boom guidance primarely via the parallelogram Long durability of the hoist rope by low flexing movement during the spraying operation The nozzle body system 25cm-nozzle body system, pneumatically switchable Low target surface distance by 25 cm-nozzle body system Benefits characterized: Low distance to the surface Extended operation times Drift risk of spray cone is decreased High profitability of the vehicle Optimal moisturizing of the stock The comfort folding Characteristics: Schematic diagramm of the folding operation folding speed 10 8 6 Folding the boom with just one keystroke Convenient for the user and reduced load on 4 2 0 0 5 10 folding angle20 15 Hydraulic folding of all boom wings the boom Timesaving Operation via ME-touch display Error minimization in the operation Variable folding speed for a rapid, but harmonious folding operation
The highlights of the HT 160 at a glance + + Hydraulic height adjustment from 1,20 m to 1,60 m* + + Independent suspension with hydropneumatic suspension + + Hydraulic track width adjustment, continuous from 1,80 m to 2,30 m* + + Comfort cabine tested according to category 4 + + Driving speed from 50 kph with reduced diesel engine speed with approximately 1.700 RPM* + + Fully automatic boom control with ME Distance Control II + + Job computer 3 with ME-touch display for operation of the sprayer + + Separate pump for the injection process, the cleaning and filling + + Innovative boom suspension combination of mast and parallelogram + + 25 cm-nozzle body system to minimize the target area and drift risk of spray cone + + The comfort folding automatic boom folding with just one keystroke + + Bräutigam-Trac-Control-touch display for innovative operation and control of the vehicle + + Complete roadworthiness with a permissible total weight of 18 tonnes *special equipment
Technical data basic vehicle Engine Deutz-engine TCD 6.1 L6 TIER IV Technical data sprayer Tank sizes norminal volume [L] 5.000/6.000/7.000/8.000 Engine power 180 kw (245 HP) Volume of fresh water [L] 600 Driving Speed 0-40 oder 0-50 kph Agitator 2 hydr. injector agigators Cabin Rear suspension Front suspension Types of steering Tyres Track width [m]* comfort cabine, air suspension, heating, air-conditioning, air suspension seat, passenger seat, windscreen washer, overpressure cabine category 4, tested according EN 15695-1 hydropneumatic hydropneumatic front axle, rear axle, all-wheel drive, crab steering from 380/90 R50 to 650/65 R42 1,80 to 2,30 Continual tank cleaning number of agigator nozzle External cleaning Filter unit Spray pump Filling pump Cleaning pump 4 automatic hose, pressure 15 bars 1 suction filter 3 1 pressure filter 2 centrifugal pump max. 800 L/min centrifugal pump max. 1000 L/min piston diaphragm pump 70 L/min, max. 15 bars Wheelbase [m] Ground clearance [m] 3,50 1,20 (- 1,60 with hydraulic height adjustment) Induction hopper volumen 60 L, hydraulically foldable, circular flushing line, canisters cleaning, spray pistol Permissible axle load fa/ra [kg] Empty weight with sprayer [kg] Max. total weight [kg] Weight distribution fa/ra [%] with emtpy sprayer Weight distribution fa/ra [%] with filled sprayer Fuel capacity diesel [L] 10.000 about 11.000 18.000 55/45 45/55 330 Changover main tank-fresh water tank Control pressure side Control suction side Level indicator Sprayer boom electropneumatic electropneumatic electropneumatic elektronic of main- and fresh water tank working width from 24-36 m: individual pneumatic nozzle switching incl. circulation line Hydraulic (Load-Sensing) max. output/pressure [L/bars] 170/200 Dimensions (l x w x h) [m] (with sprayer) 8,50 x 2,95 x 3,95 Extra equipment trailer coupling (trailing load 16.000 kg), air brake system, continuous hydraulic track width adjustment *Depending on tyres / technical changes reserved
Bräutigam GmbH - Mechanical engineering-agriculture engineering-hydraulic Your reliable partner for the agricultural machinery - in particular vehicles with hydrostatic drives Design, assembly to service - everything from one source We can work out custom solutions together with you Each vehicle will be manufactured exclusively to order - individually for you Years of experience - design of carrier vehicles since 1998 Using only high-quality components from reputable manufacturers Visit us at www.braeutigam-landtechnik.de Bräutigam GmbH Dorlaer Weg 2 34281 Gudensberg (GERMANY) phone: +49 (0)5603 4592 fax: +49 (0)5603 5920 mail: info@braeutigam-landtechnik.de