MTC Series Very Narrow Aisle MTC Turret Truck 1,kg / 1,3kg / 1,5kg Integrated pantograph (reduced operating aisle) Sealed AC motors High performance Ergonomic operating environment Seated or standing operation Choice of forward mounted or seat side control Simultaneous controls, patented hydraulic control system
4.31 m1 4.12 H 4.29 b7 l l r 4.35 Wa b1 b2 b 4.25 4.27 4.21 4.21 b5 b12 e R b9 4.14 h12 4.15 h13 n13 4.38 l8 x y 4.19 l1 4.32 m2 4.8 h7 4.7 h 4.2 h1 4.5 h4 319 s 4.4 h3 4.11 h9 997 295 Ast P 4.34 Truck Dimensions MTC series 2
Mast details / Quadform Model MTC1 MTC13 MTC13 MTC13 MTC13 MTC15MWB MTC15LWB MTC15LWB Mast type Quadform Quadform Maximum fork H=h9+h3+h13 524 574 24 74 724 774 824 874 924 974 122 152 192 1142 112 1192 1232 542 592 42 92 742 792 842 892 942 992 122 192 1142 1192 1232 (main mast) h1 274 299 324 349 374 399 424 449 474 499 539 554 574 599 9 24 44 299 324 349 374 399 424 449 474 499 524 539 574 599 24 44 (mini mast) h Free lift h9 Main lift h3 31 3 41 4 51 5 1 71 7 81 84 8 93 95 9 12 33 3 43 4 53 5 3 73 7 81 8 93 9 12 Overall extended h4 227 727 7227 7727 8227 8727 9227 9727 1227 1727 1127 17 1197 1247 127 1297 1337 47 97 747 797 847 897 947 997 147 197 1127 1197 1247 1297 1337 Raised platform h12 3585 485 85 585 5585 85 585 785 85 85 855 885 925 9 995 125 15 3 4 525 5 25 725 7 825 855 925 9 125 15 Mast details 3 stage / 3 stage Quadform Model MTC13 MTC13 MTC15MWB MTC15LWB MTC15LWB Mast type 3 stage 3 stage 3 stage Quadform 3 stage Quadform Maximum fork H=h9+h3+h13 53 3 713 78 83 93 113 18 113 123 77 8 92 995 17 11 122 1295 137 (main mast) h1 249 274 299 324 349 374 399 424 449 474 324 349 374 399 424 449 474 499 524 (mini mast) h Free lift h9 Main lift h3 357 432 57 582 57 732 7 882 957 132 54 39 714 789 84 939 114 189 114 Overall extended h4 17 737 8117 887 917 137 11117 1187 1217 1337 887 9437 1187 1937 1187 12437 13187 13937 1487 Raised platform h12 39 4725 54 225 9 7725 84 9225 99 1725 795 8295 9 9795 15 11295 12 Auxillary Mini Mast options Model MTC1, MTC13, MTC13,, MTC15MWB, MTC15LWB Maximum fork h9 214 2 3 Overall extended h4 + + 1 + 74 +12 (mini mast) h 3585 385 3
Distinguishing mark VDI 2198 General Specifications Addition data engine Performance data Dimensions Tyres/chassis Weights 1.1 Manufacturer (abbreviation) 1.2 Manufacturer s type designation 1.3 Drive: electric (battery or mains), diesel, petrol, fuel gas 1.4 Operator type: hand, pedestrian, standing, seated, orderpicker 1.5 Rated capacity/rated load 1. Load centre distance 1.8 Load distance, centre of drive axle to fork 1.9 Wheelbase 2.1 Service weight 2.2 Axle loading, laden front/rear 2.3 Axle loading, laden front/rear 3.1 Tyres: solid rubber, superelastic, pneumatic, 3.2 Tyre size, front 3.3 Tyre size, rear 3.5 Wheels, number front/rear (x = driven wheels) 3. Tread, front 3.7 Tread, rear 4.2 Height of mast, lowered 4.3 Free lift 4.4 Lift 4.5 Height, mast extended 4.7 Height of additional lift mast 4.8 Seat /stand 4.11 Additional lift 4.12 Coupling 4.14 Stand, elevated 4.15 Height, lowered 4.19 Overall length 4.2 Length to face of forks 4.21 Overall width 4.22 Fork dimensions ISO 2331 4.23 Fork carriage ISO 2328, class/type A,B 4.24 Fork carriage width 4.25 Distance between fork arms 4.27 Width across guide rolls 4.29 Reach, lateral 4.31 Ground clearance, laden, below mast 4.32 Ground clearance, centre of wheelbase 4.34.2 Aisle width for pallets x 12 crossways 4.35 Turning radius 4.38 Distance to swivellingfork pivot 4.39 Length, swivellingfork 4.4 Reaching frame width 4.41 Lost swivellingfork width 4.42 Transfer aisle width pallet 12 x 12 5.1 Travel speed, laden/unladen* 5.2 Lift speed, laden/unladen 5.3 Lowering speed, laden/unladen 5.4 Reaching speed, laden/unladen 5.8 Max. gradeability, laden/unladen 5.1 Service brake.1 Drive motor rating S2 min.2 Lift motor rating at S3 15%.3 Battery according to DIN 43531/35/3 A, B, C, no.4 Battery voltage/nominal capacity K5.5 Battery weight 8.1 Type of drive unit 1.1 Operating pressure for attachments 1.2 Oil volume for attachments 1.7 Sound pressure level at the driver s seat Q (kg) c () x () y () kg kg kg b1 () b11 () h1 () h2 () h3 () h4 () h () h7 () h9 () h1 () h12 () h13 () l1 () l2 () b1/b2 () s/e/l () b3 () b5 () b () b7 () m1 () m2 () Ast () Wa () l8 () n () B () F () Au () km/h m/s m/s m/s % kw kw V / Ah kg bar l/min db (A) MTC1 1 1783 27 ø 4 x 1 / 1 / 12 (4) 51 / 9 1 (5) 7 7 414 (2) 9.9 / 1..41 /..5 /. 7.5 2 x 12 DIN B / DIN C / DIN C 48 / 5, 48 / 5, 48 / 7 95 / 1 / 13 MTC13 13 1943 71 ø 4 x 1 / 1 / 12 (4) 51 / 9 1 (5) 225 7 7 4295 (2) 1.4 / 1.5.41 /..5 /. 7.5 2 x 12 DIN B / DIN C 48 / 7, 48 / 84 13 / 13 (2) +7 for 3 stage mast with n = 7 (MTC13, MTC13,,, MTC15MWB, MTC15LWB) (4) Available fork length, 1, 1 and 12 (5) Ast: load dimension function * 12km/h speed application specific. 4 MTC series
MTC13 13 1943 71 ø 4 x 1 / 1 / 12 (4) 51 / 9 MTC13 LWB 13 23 734 ø 4 x 178 / 1 / 12 (4) 51 / 9 MTC15 SWB 23 714 ø 4 x 178 / 1 / 12 (4) 51 / 9 MTC15 MWB 2193 78 ø 4 x 178 / 1 / 12 (4) 51 / 9 MTC15 LWB 2388 7921 ø 4 x 178 / 1 / 12 (4) 51 / 9 1.1 1.2 1.3 1.4 1.5 1. 1.8 1.9 2.1 2.2 2.3 3.1 3.2 3.3 3.5 3. 3.7 4.2 4.3 4.4 4.5 4. 4.8 4.11 4.12 4.14 4.15 4.19 4.2 4.21 4.22 4.23 4.24 4.25 4.27 4.29 4.31 4.32 Dimensions Tyres/chassis Weights Distinguishing mark 1 (5) 225 7 7 1 (5) 237 7 7 1 (5) 237 7 7 1 (5) 2495 7 7 1 (5) 285 7 7 4.34.2 4.35 4.38 4.39 4.4 4.41 4295 (2) 11.9 12..41..5. 8. 2 x 15 DIN A /42 13 441 (2) 1.4 1.5.41..5. 7.5 2 x 12 DIN B 48/185 15 441 (2) 11.9 12..41..5. 8. 2 x 15 DIN A /5 1 4 (3) 11.9 12..41..5. 8. 2 x 15 DIN A /7 19 4735 (3) 11.9 12..41..5. 8. 2 x 15 DIN A /84 19 4.42 5.1 5.2 5.3 5.4 5.7 5.1.1.2.3.4.5 8.1 1.1 1.2 1.7 Addition data engine Performance data 5
MTC series Models: MTC1, MTC13,, MTC13,, MTC15MWB, MTC15LWB Forward mounted controls Operator controls are adjustable in, angle and plane, allowing perfect ergonomic operation in both seated and standing positions. Each truck function can be controlled without repositioning the hands. Proportional control affords total control of the machine and turret head at all times allowing simultaneous multiple truck movements. Seat sided controls Seat side controls (optional) give the operator the ideal driving position with ultimate comfort, specifically designed for extended shift periods requiring a high through rate of pallet movements. Drivers cabin The cabin is equipped with a soft, nonslip rubber floor mat providing extra operator comfort. A large operator presence foot sensor mounted under the mat allows freedom of movement without confinement to a single position. The luxury driver s seat is adjustable with an ergonomically designed high backrest, thick padding, 2 degrees of rotation with spring loaded return to centre plus 3 different locking positions. The operator can comfortably turn while traveling in the reverse direction. The fold up seat is padded on the underside allowing it to by used as a backrest while operating in the the standing position. Visibility The front lean bar with integrated screen allows full and unobscured visibility of the forks, pallet and racking at all times, reducing the risk of product damage and allowing the operator to remain in a comfortable driving position. Steering Electronic steering utilizes direct drive to the steer wheel through a gear, employing an automotive style wheel with integral steering knob or optional return to center steering. Auto centering with system check and calibration on power up eliminates operator error when starting off. Turret head Designed for pallet handling in three different directions, configurations are available for various pallet dimensions. Top and bottom mounting of the turret head gives excellent load stability at all times and at all lift s. An integral pantograph hidden in the fork carriage allows the truck to operate in the smallest of aisles with maximum side operating clearances. Various different lift s enable truck configurations to suit a customers specific application. The truck features automatic synchronous fork rotation with operator graphical feedback on the user interface display. Masts Duplex or triplex masts in both a triform or quadform provide excellent mast rigidity and stability, using a series of torsion tubes. The triplex mast is perfect for low door clearances or overhead obstruction which require a low closed. The MTC15MWB and MTC15LWB utilize the patented four point quadform mast which provides exceptional rigidity at the highest of s for operator comfort, stability and minimum aisle requirments. Rectangular steel cross members give torsional rigidity and minimise deflection enabling a reach exceeding 1, AC technology Three phase AC technology is employed on all traction and steering hydraulic motors. All four motors are sealed to prevent dust or dirt ingress to improve long term reliability and performance. MTC series
Brakes Regenerative braking provides high efficiency and maintance free braking without wear to any of the components. An electric magnetic braking system secures the truck when stationary. Hydraulics The truck is equipped with proportional valve technology providing smooth control and movement of turret head functions. Two powerful hydraulic lift motors provide independent power, or they can be linked to allow ultimate control whilst operating any of the truck s functions simultaneously. CANBus counication system All sensors, controls, hydraulic actuators and motor controls are networked together to share information and counicate with one another. Elimination of multiple wiring improves reliability, performing an array of truck functions for safe, controllable and rapid operation of the machine. Cabin, turret head position and truck movement are continuously monitored so each function can operate at its optimum level. Operator pin numbers can give different performance settings to suit driver abilities and prevent unauthorized access. Service functions give engineers a comprehensive information and diagnostics, from current draws on motors to a history log of faults. Guidance Trucks are equipped with external guide wheels and an automatic aisle detection for rail guided applications. For Wire Guided applications, the truck quickly locks onto the wire when entering an aisle, if the guidance system isn t switched on, traction automatically reduces. If the truck is switched off while on the system, it automatically switches back onto the guidance system on restart. Options Cold storage 4ºC Shuttle table Pre selector Radio Data terminal wiring and bracket End of aisle controls Passcode start Mirrors Load wheel braking Zero thickness hydraulic fork positioner. Prograable cabin lift interrupts with override Seat side controls te: SWB = Short Wheel Base MWB = Medium Wheel Base LWB = Long Wheel Base 7
MTC series Models: MTC1, MTC13,, MTC13,, MTC15MWB, MTC15LWB NACCO Materials Handling Limited trading as Europe Materials Handling Flagship House, Reading Road rth, Fleet, Hampshire GU51 4WD, United Kingdom. Tel: + 44 () 1252 777 Fax: + 44 () 1252 77784 www.yaleforklifts.eu Country of Registration: England. Company Registration Number: 237 Safety. This truck conforms to the current EU requirements. Specification is subject to change without notice., VERACITOR and are registered trademarks. PEOPLE, PRODUCTS, PRODUCTIVITY, PREMIER, HiVis, and CSS are trademarks in the United States and certain other jurisdictions. MATERIALS HANDLING CENTRAL and MATERIAL HANDLING CENTRAL are Service Marks in the United States and certain other jurisdictions. is a Registered Copyright. Europe Materials Handling 213. All rights reserved. Truck shown with optional equipment Printed in The United Kingdom (313HG) EN Publication part no. 29213 Rev.3