P/I Transmitter Products. Fairchild Industrial Products Company

P/I Transmitter Products Fairchild Industrial Products Company

The Widest Range of Products for Diverse Market Applications or 50 years, Fairchild Industrial Products Company has maintained an excellent reputation as a manufacturer of precision, high quality, pneumatic, and electro-pneumatic controls. Our line of industrial control products offers one of the largest varieties of precision pneumatic and electro-pneumatic control devices available for process, machine tool, robotic and OEM applications. Our developing technology in main product groups - pneumatic pressure regulators, volume boosters, relays and electro-pneumatic transducers and transmitters has been the basis for our growth and leadership. Fairchild is ISO 9001 certified and we are authorized to display the CE mark on our electro-pneumatic products. Many of our electro-pneumatic products are also approved for intrinsically safe, explosion-proof, and NEMA 4X (IP65) ratings by FM, CSA, ATEX and SAA. Our worldwide network of stocking distributors can assist you with application support at the local level. At the factory, our applications engineering staff can solve your problems with new or existing applications. We can work with your plant and design engineers to develop a custom product to suit a specific application. At Fairchild Industrial Products Company, we have built our reputation on providing quality products, excellent customer service, quick delivery, and immediate response to customer emergencies. VISIT www.fairchildproducts.com FOR INFORMATION ON OUR NEW PRODUCTS Fairchild Products By Industry Oil & Gas Brake Control, Compressor Control, Compressor Starting System, Choke Control, Damper Control, Drilling, Pneumatic Mud Monitoring System, Fuel Supply Louver Control, Process Control and Valve Control. I/P and E/P T6000, T7800, TXI7800 Transducers Pressure Regulators 10, 10BP, 63, 65, 100, 2400 Series Relays Pneumatic Volume Boosters 14, 24, 90, 91 20, 200, 200XLR, 4500A TA8700 TA8800 TA8900 P/I Transmitters Chemical Constant Voltage Control, Controlled Air Pressure, Corrosive Material, Heat Exchanger Control, Nitrogen Tank Blanketing, Pneumatic Pressure Switch, Pressure Valve Control, Process Control, and Waste Water Flow Control. T5200, T6000, TXI7800, T7900, T7950 10BP, 63, 65, 81 24 20, 200, 4500A TA8700 TA8900 Pharmaceutical Constant Voltage Control, Corrosive Material, Distillation Process, Mixing Speed Control, Multi-pen Recorder Ink, Nitrogen Tank Blanketing, Pneumatic Pump Control, Tank Blanketing, Tank Level Gage, Valve Control, and Ventilation (Damper). T5700, T6000, T7800, TXI7800 50, 65, 66, 66BP, 70B, 81, 1600A 24 20, 200, 4500A TA8700 TA8900 2

Industrial Automation Clean Room Air Pressure/ Temperature Control, Fuel Valve Control, Inflation and Test Pressure, Heat-treating Furnace, Injection Mold Control, Pick and Place Robot, Robot Spray Gun, Test Equipment - Manual and Automated, and Weld Pressure Cylinder Control. I/P and E/P Transducers Pressure Regulators T5220, T6000 10, 16, 30, 65A, 70, 81, 1000, 1600A, 4000A Relays Pneumatic Volume 14, 15 4500A Boosters TD8500 TA8900 P/I Transmitters Medical/Biotech Biotherapeutic Delivery Devices, Damper Control, Heart/Shunt Devices, Fluid Testing, Hyperbaric Chambers, Infant Respirators, Microfluidics, Protein Crystallization, Gas Management, Tank Blanketing, Valve Control, and Ventilatory Systems. T5700, T6000, T7800, TXI7800 50, 65, 2400 Series 15, 21, 24 20, 4500A TD8500 TA8700 TA8900 Food & Beverage Constant Voltage Control, Controlled Air Pressure, Corrosive Material, Distillation Process, Fill Systems, Heat Exchanger Control, Hopper Blanket, Product Dispensing Control, and Valve Control - Flow and Temperature. T5220, T5700, T6000, T7800, TXI7800, T7900, T7950, T8000 10, 30, 65A, 200, 2000, 4000A 14, 24 20 TD8500 Power Generation Absorption Distillation, Air Purification/ Treatment Analyzer Sampling Systems, Damper Control, Condition Monitoring, Emission Control, Feed Pump Control, Pneumatic Pump Control, Purification Process Control, Steam Process Control, Tank Level Gage and Valve Control. T7800, TXI7800, T8000 63, 65A, 2400 Series 14, 15, 24, 25 20, 200, 4500A TD8500 TA8700 TA8900 Pulp & Paper Brakes - Wind/Unwinds Stands, Damper Control, Edge Guiding, Fiber Stock Forming, Ink Jet Marking Systems, Machine Control, Paper Machinery Felt Guide, Wet Side Sheet Forming, Tension Control, Valve Control, Waste Water Flow Control and Web Tension Control. T5220, T5221, T6000, T7800, TXI7800, T7900, T7950, T8000 10, 16, 30, 65A, 70, 80, 81, 85, 100, 1000, 2800, 4000A 14, 15, 21, 22, 25, 90, 91, 1500, 2500 20, 200, 2000, 4500A TA8700 TA8800 TA8900 Automotive Concentric Testing, Data Acquisition, Inspection/Gaging, High Pressure Steam Temperature Control, Paint and Finishing Systems, Robotics, Tire Molding, Uniformity Testing, Web Tension and Welding. T5200, T5220 T6000, T7800, T7900, T7950 10, 16, 30, 65A, 70, 80, 81, 1000, 1600A, 4000A 90, 91 20, 200, 4500A TD8500 TA8700 Textile Manufacturing Brakes - Wind/Rewind, Dye Application, Hopper Blanket, Machine Control, Pneumatic Pump Control, Pressure Control, Tank Refill, Waste Water Flow Control, Web Guide and Web Tension Roll & Stand Brake. T5700, T6000, T7800, TXI7800 10, 30, 64A 14, 15, 21 20, 4500A TD8500 3

STOP, TURN AND HAUL When the job requires heavy hauling, you better be able to run efficiently, turn easily and stop quickly. Fairchild s P/I transmitters, such as the TD8500, enable customers to do all three by measuring the payload, providing continuous data to the steering mechanism and controlling the hydraulic braking system. This TD8500 series is a cost effective OEM solution that meets the market need in a durable and rugged package. Call or email Fairchild to find a pressure solution for your application requirements. OIL AND GAS EXTRACTION AND PROCESSING When Oil or Gas is extracted from the earth, the application calls for a high pressure, rugged P/I transmitter. Fairchild s TA8800 series is designed for pressures up to 100,000 psi. Its hermetically sealed enclosure provides dependable operation in even the harshest drilling environments. The TA8800 series offers a compact size transmitter with a variety of output ranges and options, making it ideal for any application. When your application depends on accurate pressure sensing, you can depend on Fairchild. Call or email us for more details. DEVELOPMENT, DESIGN AND PRODUCTION Fairchild has a long history of supplying pressure control products for automotive testing and factory automation. The new Fairchild series is the latest product designed to meet the testing and development needs of this industry. Whether you are measuring air, fuel or oil pressure, exhaust, vacuum or even fuel economy, Fairchild has the products for your pressure measurement needs. In addition to basic models, our standard options allow you to custom design a P/I transmitter to best suit your application. Call or email us to put our experience to the test for your future development. 4

TD8500 TA8700 TA8800 TA8900 APPROVALS APPLICATIONS General industrial Hydraulics Pneumatics Compressors Off-road vehicle Water treatment Hydraulics Pneumatics Test systems Pumps/Compressors Mining Off-road vehicles Water treatment plants Fuel tank level Chemical tank level Pumps/Compressors Chemical processing Coating / Painting / Spraying Rig safety systems Well head Oil pumping Natural gas pipelines Hazardous locations Rig safety systems Chemical processing Shipboard/Marine Gas compressors Hazardous locations FEATURES BENEFITS Low cost Small size Environmentally sealed High cycle life (1,000,000 cycles) Shock resistant Stainless steel construction DIN connector standard Spike resistant High cycle life Stainless steel construction External zero adjust All welded construction Optional external zero and span adjusts 316L SS wetted parts Ranges down to 20 WC Hermetically sealed enclosure 316L SS housing Less than 5 height 1.5 diameter < 1.3 ma current consumption available NACE complaint materials available Magnetically coupled external controls 5:1 ranging Hermetically sealed 316 SS housing 1.5 diameter < 7 height NACE compliant materials available STANDARD PSI RANGES Available in: MPa, kgf/cm 2, et al 0-100 thru 0-15,000 psig 0-5 thru 0-15,000 psig 0-10 thru 0-100 psia 0-15 psiv 0-3 thru 0-250 psig/s 0-15 thru 0-250 psia 0-15 psiv 0-100 thru 0-100,000 psis/a 0-100 thru 0-100,000 psis/a STANDARD BAR RANGES 0-10 thru 0-1,400 barg 0-0.35 thru 0-1,000 barg 0-0.7 thru 0-7 bara 0-1 barv 0-0.2 thru 0-30 bar 0-1 thru 0-30 bara 0-1 barv 0-7 thru 0-7,000 bars/a 0-7 thru 0-7,000 bars/a FULL SCALE OUTPUT (FSO) 0-5 (0-10) Vdc 4-20 ma 0-5 (0-10) Vdc 4-20 ma 0-5 (0-10) Vdc 4-20 ma 5-10 mv/v 0-5 (0-10) Vdc 4-20 ma 2 mv/v 4-20 ma NOMINAL INPUT VOLTAGES 10-30 Vdc 10-40 (15-40) Vdc 10-40 Vdc 11.5-30 Vdc 9-30 Vdc 10-15 Vdc 11.5-30 Vdc 15-30 Vdc 10-15 Vdc 11.5-30 Vdc ACCURACY [COMBINED ERROR] < ± 0.65% < ± 0.60% < ± 0.15%(> 200psi) < ± 0.25% (< 200psi) < ± 0.10% (optional) < ± 0.15% < ± 0.25% (> 20K psi) < ± 0.30% (100 psi) < ± 0.15% < ± 0.25% (> 20K psi) < ± 0.30% (100 psi) STANDARD PRESSURE CONNECTION 1/4 NPT Female 1/4 NPT Female 1/4 NPT Female 1/4 NPT Female to 15K psi High pressure tube > 20K psi 1/4 NPT Female to 15K psi High pressure tube > 20K psi STANDARD WETTED PARTS 15-5 PH SS 316L SST Buna-N O-ring 0-200 psi 316L SS 15 5 PH SS to 15K psi PH 13-8 Mo SS >20K psi 15 5 PH SS to 15K psi PH 13-8 Mo SS >20K psi WEIGHT 10 oz (284 g) 10 oz (284 g) 10 oz (284 g) 24 oz (680 g) 24 oz (680 g) 5

Model TD8500 P/I Pressure Transmitter A High Pressure OEM Solution Shown with Standard 4 pin DIN Connector LONG LIFE OPERATION Designed to exceed 100,000 cycles, the TD8500 is shock and vibration resistant for rough duty. OUTPUTS THAT YOU NEED Available with either 0 to 5 VDC (10VDC option) or 4 to 20 ma output. SMALL SIZE, BIG PERFORMANCE The small size makes it ideal for tight spots. All-welded stainless construction for demanding industrial and heavyduty applications. The TD8500 is environmentally sealed and factory preset for no field adjustment, to provide a sealed transmitter impervious to contamination from the environment. ENHANCED DURABILITY The diaphragm, machined from corrosion resistant billet steel, is free from oil fills, isolation diaphragms or silicon sensing chips, enhancing its durability. Features: Compact Size Long service life (100K cycles) Shock and Vibration resistant All-Welded Design Environmentally sealed Typical Applications: Off Road Vehicles Hydraulic Systems Pumps and Compressors Heavy Machinery General Industrial 6

SPECIFICATIONS Performance Full Scale Pressure Range (FSPR)...........................See Ordering Information Non-linearity (Best Fit Straight Line)................................... ± 0.5% FSO Hysteresis and repeatability......................................... ± 0.3% FSO Full Scale Output (FSO) TD8501....................................................5 VDC ± 3% @ 70 o F TD8502....................................................16 ma ± 3% @ 70 o F Long Term Stability..................................... ± 0.5% FSO per 6 months Compensated Temperature Range...................................70 o F to 170 o F Maximum Operating Temperature Range..............................200 o F Process Minimum Operating Temperature Range......................................-20 o F Non-Operating Temperature Range................................-60 o F to +250 o F Thermal Effect on Zero............................... ± 3% FSO per 100 o F typical Thermal Effect on Span............................... ± 2% FSO per 100 o F typical Electrical Supply Voltage.....................................................10 to 30 VDC Power Supply Regulation TD8501.................................................. ± 0.05% FSO per volt TD8502.................................................. ± 0.08% FSO per volt Output Signal TD8501..........................................0-5 VDC (0-10VDC optional) TD8502...........................................................4-20 ma Circuit Protection......................... Reverse polarity protected. Varistor protected across the input leads for surges above 40VDC and currents to 8 Amps peak with a pulse width of 1 msec. Insulation Resistance.............................................1000 MegOhms at 50 VDC Response Time..................................................................< 5 msec Electrical Connection........................................................DIN plug 43650 Mechanical Proof Connection.........................................1/4 NPT Female Proof Pressure......................... 1.5X FSPR or 25K psi, whichever is less Burst Pressure......................... 5 X FSPR or 30K psi, whichever is less Pressure Cavity Volume....................................0.07 cubic inches Mounting.................................May be supported by process piping Materials of Construction Wetted Parts........................................15-5PH Stainless Steel Housing...............................................304 Stainless Steel Weight..........................................................10 oz. ORDERING INFORMATION T D 8 5 0 Output 0-5 VDC...................... 1 4-20 ma...................... 2 Input Range * (gage format standard) 0-100 psi............................... 12 0-300 psi............................... 13 0-500 psi............................... 14 0-1000 psi.............................. 15 0-1500 psi.............................. 16 0-2000 psi.............................. 17 0-5000 psi.............................. 18 0-15000 psi............................. 19 [0-10 BAR].............................. 22 [0-25 BAR].............................. 23 [0-40 BAR].............................. 24 [0-75 BAR].............................. 25 [0-100 BAR]............................. 26 [0-150 BAR]............................. 27 [0-350 BAR]............................. 28 [0-1000 BAR]............................ 29 SPECIAL RANGE*.................... (Please specify desired range) 00 Pressure Format Absolute....................................... Gage.......................................... Performance Options Mating Electrical Connector................................. *Custom calibrated pressure ranges available A G I Accessories Adapters Available for: G1/2 male thread G1/4 male thread 1/4 NPT male thread GROUND 2 1 3 TD8501 TD8502 Pin 1 +Power +Power / +Signal Pin 2 +Signal -Power / -Signal Pin 3 Common No connection Ground Spade Case Ground Case Ground Mating connector sold separately 7

Model P/I Pressure Transmitter A Low Cost, High Performance Solution DESIGNED FOR HARSH CONDITIONS Fairchild s Model uses bonded foil sensing technology to offer a rugged but inexpensive solution that is small and fits into hard-to-access areas. INSPIRED BY DIVERSE NEEDS Hydraulic systems in test and control applications generate severe spikes that overpressure many sensors. To combat spikes, Fairchild employs a bonded foil strain gage on a hardened stainless steel diaphragm. This higher mass diaphragm withstands short-term overpressure conditions inherent in hydraulic applications. For measuring low pressures (5 to 200 PSI), Fairchild uses a corrosion resistant ceramic diaphragm sensor. EASILY ADAPTABLE The series utilizes several features to fit the widest possible applications. The standard DIN 43650 connector is an industrial standard with excellent weather resistance. Shown with 4 pin DIN and Optional mating connector The can be fitted with a 6-pin bayonet or a direct coupled cable. The has no oil fill or isolation diaphragms and has a 1/4" NPT or SAE female pressure port. A standard zero adjustment control makes setup simple. Features: Low Cost Adjustable zero Resistant to pressure spikes Cost effective DIN connector Welded stainless steel construction Typical Applications: Hydraulic systems Injection molding Die casting Off road vehicles Compressors and pumps High volume usage 8

SPECIFICATIONS PERFORMANCE Full Scale Pressure Range.......... Non-Linearity (Best Fit Straight Line)... Hysteresis & Repeatability........... Full Scale Output (FSO) Model TD8601.................... Model TD8602.................... Resolution....................... Long Term Stability................ Compensated Temperature Range.... Maximum Operating Temperature..... Minimum Operating Temperature...... Non-Operating Temperature Range.... Thermal Effect on Zero............. Thermal Effect on Span............. ELECTRICAL Supply Voltage................... Power Supply Regulation Model TD8601.................... Model TD8602.................... Current consumption............... Output Signal Model TD8601.................... Model TD8601 w/ DM option......... Model TD8602.................... Load Resistance (Model TD8602 only).. Circuit Protection.................. Insulation Resistance.............. Response Time................... Electrical Connections.............. MECHANICAL Pressure Connections....... 1/4" NPT Female Proof Pressure............ 1.5 times FSPR or 25K PSI, whichever is less Burst Pressure............ 5 times FSPR or 30K PSI, whichever is less Pressure Cavity Volume..... 0.07 cubic inches Mounting................ May be supported by process piping Materials of Construction Wetted Parts 0-15 thru 200 PSI......... 316 stainless steel, Buna-N O-Ring, Alumina ceramic 0-300 PSI and above....... 15-5PH stainless steel Housing................. 304 stainless steel Weight................ 10 oz Identification.............. Label attached onto body ACCESSORIES......... Digital indicator Protective cover Adapters Available for: G1/2 male thread G1/4 male thread 1/4 NPT male thread 0-20K PSIG(See Ordering Information) < ± 0.5% FSO < 0.25% FSO 4 VDC ± 2% at 70 F 16 ma ± 2% at 70 F Infinite < ± 0.5% FSO per 6 months 70 F to 170 F 200 F -20 F -60 F to +250 F < ± 3% FSO per 100 F Typical < ± 2% FSO per 100 F Typical 9 to 30 VDC < ± 0.05% FSO per Volt < ± 0.08% FSO per Volt <1.1mA 0.25-4.25 VDC 0 to 10 VDC (requires 15 VDC supply minimum) 4 to 20 ma 1500 Ohms maximum at 40 VDC Reverse polarity protected. Varistor protected across input leads for surges above 40 VDC and currents to 8 A peak with a pulse width of 10 x 1000 µsec <5nS < 5 msec for 90% change in output DIN plug 43650 1/2-5/8 (TYP) ORDERING INFORMATION T D 8 6 0 Output 0-5 VDC...................... 1 4-20 ma...................... 2 Input Range * (gage format standard) 0-5 psi................................. 11 0-30 psi................................ 12 0-100 psi............................... 13 0-300 psi............................... 14 0-750 psi............................... 15 0-1500 psi.............................. 16 0-5000 psi.............................. 17 0-10 kpsi............................... 18 0-20 kpsi............................... 19 [0-1 BAR]............................... 21 [0-10 BAR].............................. 22 [0-50 BAR].............................. 23 [0-100 BAR]............................. 24 [0-250 BAR]............................. 25 [0-500 BAR]............................. 26 [0-750 BAR]............................. 27 [0-1000 BAR]............................ 28 [0-1300 BAR]............................ 29 SPECIAL RANGE*.................... (Please specify desired range) 00 Pressure Format Absolute..................................... Gage........................................ Vacuum (< 15 Psi).............................. Performance Options Mating Electrical Connector................................. I 6 Pin Bayonet Connector................................... BY Modified Output (0-10 VDC, TD8601 only)....................... DM Modified Output (< 5 VDC, TD8601 only)..................... DX Special Calibration........................................ EA Viton O-Ring............................................. GA Ethylene Propylene O-Ring................................. GD CE Approval............................................. NJ *Custom calibrated pressure ranges available 2 3/4 7/16 A G V 1 1/4 FLATS Ø1 1/2 TD8601 TD8602 Pin 1 +Power +Power / +Signal Pin 2 +Signal -Power / -Signal Pin 3 Common No connection Ground Spade Case Ground Case Ground ALL STAINLESS STEEL HOUSING ACCESS SCREW FOR ZERO ADJUSTMENT PRESSURE CONNECTION: 1/4-18NPT THREAD Note: Vented gage units should only be installed in environments that allow the breather to remain dry and free from contamination. Application of some available options may affect standard performance. NOTE: ALL DIMENSIONS ARE NOMINAL, IN INCHES AND FOR REFERENCE PURPOSES ONLY 9

Model TA8700 P/I Pressure Transmitter Rugged Industrial Pressure Transmitter HIGH ACCURACY Combined accuracy is 0.25% or better with an optional improved accuracy of better than 0.1%. Standard ranges are from 3 PSI to 250 PSI with outputs of mv/v, 4-20 ma and 0-5 VDC. Also available is an optional zero and span adjustment. FOR SPECIAL OR CORROSIVE ENVIRONMENTS The TA8700 Series features all welded stainless steel construction with 316L stainless steel wetted parts. In addition, Special cleaning for Oxygen service is available on the TA8700 series. A VARIETY OF OPTIONS The TA8700 Series has offers a variety of standard options and our ability to modify our products provides flexibility to meet your specific application needs. Options include alternate pressure ports, electrical connectors and various electrical outputs. Features: All welded construction 316L SS wetted parts Ranges down to 20" WC full scale High accuracy Typical Applications: Fuel tank level Chemical tank level Pumps and Compressors Chemical processing Wiring Connections TA8701 TA8702 TA8703 Red +Power +Power/Signal +Power Black +Signal -Power/Signal +Signal Green Case Ground Case Ground -Power White - Power/Signal NA -Signal Brown NA NA Case Ground 10

SPECIFICATIONS Performance Full Scale Pressure Range........... (FSPR) Accuracy (combined linearity, hysterisis and repeatability).......... Hysteresis & Repeatability........... Full Scale Output (FSO) TA8701..................... TA8702..................... TA8703..................... Zero Balance..................... Long Term Stability................. Response Time................... Temperature Effect on Zero.......... Temperature Effect on Span.......... Compensated Temperature Range..... Operating Temperature Limits........ Storage Temperature Limits.......... Electrical Supply/Voltage TA8701/TA8702............... TA8703..................... Power Supply Regulation Effect....... Output Signal TA8701..................... TA8702..................... TA8703..................... Load Resistance: TA8702............ Circuit Protection.................. Electrical Connection............... 0-3 thru 0-250 PSIG/PSIS 0-15 thru 0-250 PSIA, 0-15 PSIV <± 0.25% ±0.1% FSO 5 vdc 16 ma 5, 10mV/V <±1% FSO ±0.25% FSO per 6 months <1 msec for 10% to 90% FSO ±1.0% per 100 F ±1.0% per 100 F 32 F to +180 F -40 F to +185 F -40 F to +250 F 9.0 to 30 VDC 15 VDC max ±0.0001% FSO per Volt 0 to 5 VDC 4 to 20 ma 3 to 5 PSI: 5 mv/v >10 PSI: 10 mv/v 12 VDC min with 150 ohm/and 30 VDC max with 1050 ohms Output may be short-circuited indefinitely. Input polarity may be reversed. Over-voltage protected to 1000 volts. < 1 msec duration. 1/2" NPT (M), 18 AWG wire(6 ft St d) ORDERING INFORMATION T A 8 7 0 Output 0-5 VDC...................... 1 4-20 ma...................... 2 5, 10 mv/v.................... 3 Input Range * (gage/sealed format standard) 0-3 psi............................... 11 0-30 psi.............................. 12 0-100 psi............................. 13 0-150 psi............................. 14 0-250 psi............................. 15 [0-0.5 BAR]........................... 21 [0-1 BAR]............................. 22 [0-10 BAR]............................ 23 [0-20 BAR]............................ 24 [0-30 BAR]............................ 25 SPECIAL RANGE*................... 00 (Please specify desired Range) Pressure Format Absolute.................................... Gage....................................... Sealed Gage................................. Vacuum..................................... A G S V MECHANICAL Pressure Connection............... Proof Pressure.................... Burst Pressure.................... Diameter........................ Weight.......................... MATERIALS OF CONSTRUCTION 1/4"-18 NPT female 3 times rated range or 10K PSI whichever is less 5 times rated range or 10K PSI whichever is less 1.5 inches 10 oz. Enclosure Housing................. 304 and 316 stainless steel Pressure Connection............... 316 stainless steel Sensor.......................... 316 stainless steel Mounting........................ May be supported by pressure connection Identification...................... Laser etched onto body Performance Options Bleed Port................................................ D F Improved Accuracy 0.1% FSO.............................. D N Modified Output (0 to 10 VDC, TA8701 Only).................... D M Cleaning for Oxygen Service................................. D Q Modified Output (0 to 4.5 VDC, TA8701 Only).................... D X Special Calibration Run..................................... E A Customer specified indentification............................. N H CE Design and label (consult factory).......................... N J 1/8 DIN digital indicator (consult factory)........................ PW External Zero and Span Adjustment........................... TH Alternate Pressure Ports (consult factory).......................w ( ),Y ( ) Direct Coupled Cable...................................... ZU *Custom calibrated pressure ranges available ACCESSORIES (Contact Factory) Mounting Bracket Conduit Connection Box Loop Powered Digital Indicator Protective Cover Note: For units equipped with a breather vent, consideration should be given to ensure that the breather element is kept clear and exposure to Contamination is minimized. Application of some available options may affect standard performance. BREATHER ELEMENT FOR USE ON PSIG RANGES 4.45 [11.3] (STD) 4.70 [11.9] ( TF ) CONDUIT CONNECTION: 1/2-14 NPT FOR CUSTOMER SUPPLIED JUNCTION BOX OR CONDUIT ELECTRICAL CONNECTION: #18 GAGE, VINYL WIRE LENGTH 6' STD Ø1.50 [3.8] 1.25 [3.2] HEX FLATS 1.125 [2.9] WRENCH FLATS 11

Model TA8800 P/I Pressure Transmitter High Pressure Transmitter RUGGED CONSTRUCTION All welded construction and stainless steel surfaces makes the TA8800 ideal for corrosive environments. The transmitters O-Ring free design ensures reliability with corrosive media. Fairchild s TA8800 FM approved labelled units are designed to meet NEC/API Dual Seal requirements. The Model TA8800 is hermetically sealed, to eliminate contamination from liquid or gas intrusion. For the most corrosive environments, Hastelloy, Inconel, and 316 SS wetted parts are available. OVERPRESSURE PROTECTION Model TA8800 features bonded foil strain gage sensors. The overpressure protection in this technology helps to eliminate damage to the sensors when they are exposed to transient pressure spikes. Fairchild also offers isolation diaphragms and oil fills for specific application requirements. Features: All stainless steel construction Small size - 1.5 diameter Exotic wetted materials available Watertight/submersible design 4 20 ma, 0 5 V, mv/volt output FM, ATEX, CSA, and CE approvals available Typical Applications: Off shore rigs Gas compressors Paint spraying Water treatment Natural gas pipeline Polyethylene manufacture Rolling mills Stamping presses PRESSURE MEASUREMENT SOLUTION You ll find complete specifications on the facing page to help you select the right TA8800 transmitter for your application. Fairchild offers a full line of pressure measurement and control products for the process control industry including a low power version of the TA8800 which draws less than 1 ma of current. AGENCY APPROVALS AVAILABLE SPRING 2008 CERTIFICATIONS Consult factory for available Options FM.................. Intrinsic Safety (TA8802 only): Class I, II, III, Division 1, Groups A-G, Class I, Zone 0, AEx ia IIC, T4 at Ta=80ºC, T5 at Ta=40ºC Entity, Type 4X hazardous locations Explosion Proof: Class I, II, III, Division 1, Groups A-G, AEx d IIC, T5 at Ta=88ºC NEMA 4X hazardous locations Nonincendive (TA8802 only): Class I,II,III Division 2, Groups A,B,C,D,F,G, Class I, Zone 2, Group IIC, T4 at Ta=80ºC T5 at Ta=40ºC, Type 4X hazardous locations CSA.................. Intrinsic Safety (TA8802 only): Ex ia IIC; Class I, Zone 0; Class I, II, III, Groups A-G; Type 4, T4 at Ta=80ºC, T5 at Ta=40ºC Explosion Proof (TA8802,TA8803 only): Class I, II, III, Groups A-G Hazardous Locations ATEX.................. Intrinsic Safety (TA8802) II 1G EEx ia IIC, -20ºC, Ta <40ºC Flameproof: II 2 G EEx d IIC, T5 (-20ºC < Ta < 80ºC) CE.................. EMC Directive 89/336/EEC and Low Voltage Directive 72/23/EEC EN 61010-1 (1993)/ Safety Requirements EN 61326-(2001) - EMC Requirements PED Directive 97/23/EC 12

PERFORMANCE Full Scale Pressure Range (FSPR).... ORDERING INFORMATION 0-100 thru 0-100K PSIS, PSIA Linearity (Best Fit Straight Line) 0-100 PSI....................... ±0.5% 150-10K PSI..................... ±0.2% T A 8 8 0 15K-100K PSI.................... ±0.25% Hysteresis....................... <0.15% FSO Output Repeatability..................... <0.15% FSO 0-5 VDC...................... 1 Full Scale Output (FSO) TA8801......................... 5 VDC 4-20 ma...................... 2 TA8802......................... 16 ma 2mV/V........................ 3 TA8803......................... 2 mv/v Zero and Span Balance............. ±1% FSO Input Range * Long Term Stability................ <±0.25% FSO per 6 months (gage/sealed format standard) Response Time................... <1 msec to reach 90% of FSO Temperature Effect on Zero.......... <±1% FSO per 100 F 0-100 psi............................. 11 Temperature Effect on Span.......... <±1% FSO per 100 F 0-250 psi............................. 12 Compensated Temperature.......... 70 F to +170 F Operating Temperature............. -40 F to+190 F 0-500 psi............................. 13 Non-Operating Temperature......... -65 F to +250 F 0-750 psi............................. 14 ELECTRICAL Supply Voltage 0-1000 psi............................ 15 TA8801/TA8802................... 12 to 36 VDC 0-5000 psi............................ 16 TA8803......................... 10 V nominal, 15 V maximum Power Supply Regulation Effect 0-10000 psi......................... 17 TA8801/TA8802................... <±0.02% FSO per Volt 0-50000 psi......................... 18 TA8803......................... Ratiometric Output Signal 0-100000 psi (not agency approved)...... 19 TA8801......................... 0-5 VDC TA8802......................... 4-20 ma TA8803......................... [0-7 BAR]............................. 21 2 mv/volt (Nominal) Load Impedance [0-20 BAR]............................ 22 TA8801......................... 100K Ohms minimum TA8802......................... [0-50 BAR]............................ 23 1500 Ohms max. at 40 VDC & 0 Ohms at 10 VDC Bridge Impedance [0-100 BAR]........................... 24 (All)........................... 5000 Ohms nominal Circuit Protection [0-250 BAR]........................... 25 (TA8801/TA8802)................. Varistor protected across the input leads for surges [0-500 BAR]........................... 26 above 40 V and currents to 250 Amps peak with a pulse width of 20 µsecs. Reverse polarity protected. Insulation Resistance TA8801/TA8802................... >200 MegOhms to case ground TA8803......................... >1000 MegOhms to case ground at 50 VDC and 70 F Electrical Connection............... 1/2 NPT (M), 18 AWG wire, 72 TA8801 TA8802 TA8803 Red +Power +Signal +Power Black +Signal -Signal +Signal Green Case Ground Case Ground -Power White -Power/-Signal -Signal Brown Case Ground MECHANICAL Pressure Connection 0-100 thru 0-15K PSI...... 1/4-18 NPT Female 0-20K thru 0-50K PSI...... 1/4 F250-C High Pressure Tube 0-60K thru 0-100K PSI..... 5/16 F312-C High Pressure Tube Proof Pressure 0-100 thru 0-15K PSI...... 1.5 times FSPR or 20K PSI, whichever is less 0-20K thru 0-100K PSI..... 1.2 times FSPR Burst Pressure 0-100 thru 0-15K PSI...... >2.3 to 5 times FSPR dependent on sensor 0-20K thru 0-100K PSI..... >1.5 times FSPR or 125K PSI, whichever is less Mounting............... Supported by process piping or optional mounting bracket Materials of Construction Enclosure 0-100 thru 0-15K PSI...... 15-5 PH and 316 stainless steel 0-20K thru 0-100K PSI..... 316 SST and PH 13-8 Mo SST Wetted Parts 0-100 thru 0-15K PSI...... 15-5 PH stainless steel 0-20K thru 0-100K PSI..... PH 13-8 Mo SST Shock Limitation......... 100 Gs Weight................. 24 oz. Identification............. Laser etched onto body Enclosure............... Classification NEMA 4X, 6 1 1/2 DIA ALL WELDED DESIGN NO O -RINGS OR SEALS 1 1/4 FLATS UNIT INFORMATION LASER MARKED ON HOUSING 4 15/16 1/2-14 NPT FOR CONDUIT 72" MIN (TYP) ELECTRICAL CONNECTION: #18 AWG, VINYL WIRE STANDARD PRESSURE CONNECTION: 1/4-NPT (FEMALE) STANDARD WETTED PARTS MATERIAL: 15-5PH SST [0-1000 BAR].......................... 27 [0-3500 BAR].......................... 28 [0-6600 BAR] (not agency approved)....... 29 SPECIAL RANGE*................... 00 (Please specify desired range) Pressure format Sealed Gage................................. S Absolute.................................... A Performance Options Bleed Port (10K PSI and below)............................... D F Improved temp compensation ( < 0.5 % / 100 F for Zero/Span)..... D G Modified Output (0 to 10VDC, TA8801 Only)..................... D M Cleaning for Oxygen Service................................. D Q Modified Output (< 5VDC, TD8801 only)........................ DX Special Calibration Run*..................................... E A Direct Mount Indicator with explosion proof housing............... J J Direct Mount Indicator...................................... J S CSA Explosion proof label (TA8802/TA8803).................... M E Modified electrical damping (TA8802).......................... M R ATEX Flameproof label..................................... N G Customer specified indentification............................. N H CE label (TA8801/TA8802).................................. N J ATEX Intrinsic Safety label (TA8802)........................... N K CSA Instrinsic Safety label (TA8802)........................... N X FM Explosion Proof label (TA8802)............................ N Y FM Non-incendive label (TA8802)............................. N Z 1/8 DIN digital indicator (consult factory)........................ P W 316 Stainless steel wetted parts............................... Q A Inconel (X-750) wetted parts................................. Q B Hastelloy (C-276) wetted parts................................ Q C FM Instrinsic Safety label (consult factory)....................... T F Alternate Pressure Ports (consult factory)....................... W( ), Y( ) Direct Coupled Cable...................................... ZU *Custom calibrated pressure ranges available 13

Model TA8900 P/I Pressure Transmitter Adjustable High Pressure Transmitter COMPACT AND COMPLETELY SEALED The TA8900 is designed to withstand harsh atmospheres and submersion to 100 feet. All welded construction combined with 316 stainless steel makes the TA8900 airtight, watertight, and ideal for corrosive environments. An O-Ring free design ensures reliability. APPROVAL OPTIONS Model TA8900 qualifies for FM, CSA, and ATEX ratings. External zero, span, and calibration controls are hermetically sealed, yet easily adjusted by means of Fairchild s unique magnetically coupled adjustments. The signal conditioner in the TA8900 allows for 5:1 ranging of the transmitter s standard pressure range. IN-FIELD SETUP AND RANGING A calibration circuit permits ranging and setup without a calibrated pressure source. When the cal switch is activated, an electronic signal is sent through the unit, simulating the level or pressure. To speak to a member of the Fairchild process team, call us at (336) 659-3400 or email to CS@fairchildproducts.com. Features: All stainless steel construction Small size - 1.5 diameter Exotic wetted materials available Watertight/submersible design 4 20 ma output FM, ATEX, CSA, and CE approvals available Typical Applications: Off shore rigs Gas compressors Paint spraying Water treatment Natural gas pipeline Polyethylene manufacture Rolling mills Stamping presses AGENCY APPROVALS AVAILABLE SPRING 2008 CERTIFICATIONS Consult factory for available Options FM............ Intrinsic Safety: Class I, II, III, Division 1, Groups A-G, and AEx ia IIC, T4 at Ta=80ºC, T5 at Ta=40ºC, Indoor and Outdoor NEMA/Type 4X Hazardous Locations Explosion Proof: for use in Class I, Division 1, Groups A-D, Class II, Groups E,F,G, Class III, AEx d IIC, T5 at Ta=88ºC, NEMA/Type 4X, Hazardous Locations Nonincendive: Class I,II,III Div. 2, Groups A-G and Class I, Zone 2, Group IIC, T4 at Ta=80ºC, T5 at Ta=40ºC CSA........... Intrinsic Safety: Class I, Div. 1, A-D Class II, E-G, Class III, Ex ia IIC T4 at Ta=80ºC, T5 at Ta=40ºC Explosion Proof: Class I, A-D, Class II, E-G Class III Hazardous Locations. ATEX.......... Intrinsic Safety: II 1 G EEx ia IIC, -20ºC T4, Ta <50ºC Flameproof: II 2 G CE............ EEx d IIC, T5 (-20ºC < Ta < 80ºC) EMC Directive 89/336/EEC and Low Voltage Directive 72/23/EEC EN 61010-101993/A2:1995: Low Voltage Standard EN 61326: EMC Conformity Standard PED Directive 97/23/EC 14

PERFORMANCE Full Scale Pressure Range (FSPR).... Non-linearity (Best fit straight line)..... Hysteresis & Repeatability........... Full Scale Output (FSO)............. Resolution....................... Long Term Stability................. Response time (mechanical & electrical combined).... Temperature effect on zero........... Temperature effect on Span.......... TEMPERATURE EFFECT ON ZERO AND SPAN Combined at 5:1 range down......... Compensated Temperature Range..... Maximum operating temperature...... Minimum operating temperature....... Non-operating temperature range...... ELECTRICAL Supply Voltage.................... Power Supply Regulation............ Output Signal..................... Load Impedance.................. ZERO ADJUSTMENT Elevation........................ Suppression...................... Span Adjustment.................. Range Calibration Signal............ Calibration Signal Accuracy.......... Circuit Protection.................. Bridge Resistance................. Insulation Resistance............... RFI/EMI Suppression............... Electrical Connection............... Red........................... Black........................... Green........................... MECHANICAL PRESSURE CONNECTIONS 100 thru 15K PSI.................. 20K thru 50K PSI.................. 60K thru 100K PSI................. PROOF PRESSURE 100 thru 0-15K PSI................. 20K thru 0-100K PSI............... BURST PRESSURE 100 thru 0-3K PSI.................. Up to 5K PSI..................... 7.5K thru 10K PSI................. 15K PSI......................... 20K PSI......................... Shock Limitation................... Weight.......................... ENCLOSURE MATERIALS 100 thru 15K PSI.................. 20K thru 100K PSI................. WETTED MATERIALS 50 thru 15K PSI................... 20K thru 100K PSI................. Enclosure Classification............. ACCESSORIES Mounting Bracket Conduit Connection Box Loop Pwr Digital Indicator 0-100 thru 0-100K PSIA/PSIS 100-150 PSI typical at 0.2% FSO 300-10K PSI typical at 0.1% FSO >10K PSI typical at 0.25% FSO < ±0.05% FSO 16 ma at 70 F Infinite <±0.25% FSO per 6 months <5mSec to reach 90% of FSO <±0.5% FSO per 100 F <±0.5% FSO per 100 F <±4.0% FSO per 100 F 70 F to +170 F +190 F -40 F -65 F to 250 F 12 to 40 VDC <±0.02% FSO per volt 4-20 ma 1500 Ohms maximum at 40 VDC -100% of FSO +50% of FSO Rangeable down 5:1 from standard range 20% of FSPR externally switched ±1.0% FSO. The exact signal to pressure correlation is provided with each unit. Varistor protected across the input leads for surges above 40V and currents to 250A peak with a pulse width of 20 µsec. Reverse polarity protected. 5K Ohms nominal >200 MegOhms to case ground Negligible to 500 MHz at 5 Watts direct contact 1/2" NPT Male, 18 AWG, 72" +Signal -Signal Case Ground 1/4" NPT female Autoclave Engineers F250-C 1/4" High Pressure Tube Autoclave Engineers F312-C 5/16" High Pressure Tube 1.5 times FSPR or 20K PSI, whichever is less 1.2 times FSPR >5 times FSPR >4 times FSPR >2.7 times FSPR >2.3 times FSPR >1.5 times FSPR or 125K PSI, whichever is less 100G s 24oz. 15-5 PH and 316 stainless steel PH 13-8 Mo SST and 300 Series SST 15-5 PH stainless steel PH 13-8 Mo SST NEMA/Type 4x 1.25 Hex 1.50 Shunt Calibration ORDERING INFORMATION Output T A 8 9 0 4-20 ma...................... 2 Input Range * (sealed gage format standard; contact factory for options) 0-100 psi............................. 12 0-250 psi............................. 13 0-500 psi............................. 14 0-1000 psi............................ 15 0-5000 psi............................ 16 0-10000 psi......................... 17 0-50000 psi......................... 18 0-100000 psi........................ 19 [0-3.5 BAR]........................... 21 [0-10 BAR]............................ 22 [0-50 BAR]............................ 23 [0-100 BAR]........................... 24 [0-250 BAR]........................... 25 [0-500 BAR]........................... 26 [0-1000 BAR].......................... 27 [0-3500 BAR].......................... 28 [0-6600 BAR].......................... 29 SPECIAL RANGE*................... 00 (Please specify desired range) Pressure Format Sealed Gage................................. Absolute.................................... Performance Options Mini change electrical connector (Consult factory)................. B B Micro change electrical connector (Consult factory)................ B P Bleed port (10K psi and below)............................... D F Improved temperature and compensation....................... D G Special Shunt calibration.................................... D K Cleaning for oxygen service.................................. D Q Special calibration run...................................... E A CSA Explosion - proof label.................................. M E ATEX Flameproof label..................................... N G Customer specified indentification............................. N H CE label................................................. N J Secondary containment..................................... N T CSA Instrinsic Safety label.................................. N X FM Explosion Proof label.................................... N Y FM Non-incendive label..................................... N Z FM Instrinsic Safety label................................... T F Hastelloy, Inconel or 316 SST wetted parts...................... Q( ) Alternate pressure ports.................................... W( ), Y( ) Direct coupled cable........................................ Z U *Custom calibrated pressure ranges available Coarse Zero Red Black Green S A TA8902 +Signal -Signal Case Ground Pressure Range Length A 0-50 thru 0-15,000 psi 6.35 0-20,000 thru 0-50,000 psi 6.72 0-60,000 thru 0-100,000 psi 7.47 Span A Fine Zero 15

Fairchild Industrial Products Company 3920 West Point Boulevard Winston-Salem, NC 27103 phone: 336-659-3400 fax: 336-659-9323 sales@fairchildproducts.com www.fairchildproducts.com P/I TRANSMITTER PRODUCTS Rev 01/2008 Litho in USA