Visit us at 5170 N 125th St. Butler WI or online at 59

Most small body mono-tube shocks have too much rod pressure which removes driver feel and causes the race car to feel like it is on top of the race track instead of gripping the track. The 3200 series shock utilizes a base valve installed between the floating piston and the valving piston to isolate the pressure, allowing for substantial reduction in rod pressure. Maximum traction is obtained because pressure build up is dramatically reduced with the use of the low rod pressure. The base valve design requires so little gas pressure that certain valvings have only 3 lbs. of rod pressure. This low rod pressure creates more driver feel which is lost in many high pressure shocks. The 3200 series shock will accept gas pressure from 10 lbs. to 100 lbs. which provides for fine tuning the chassis balance with gas pressure. 014-1022 is a split valve shock used on the front to promote weight transfer 014-1034 and 014-1035 are split valve shocks for rear applications. Softer compression speeds up weight transfer and heavy rebound keeps rear weight in the car. Application Valve Comp Ext Mount Part Number Price GM full size and GM Metric, 7 (Ex Heavy) 10-1/2 15-1/2 Front 014-1020 63.99 Ford full size and mid-size, 6 (Heavy) 10-1/2 15-1/2 Front 014-1021 63.99 Merc Montego and Cougar, 7-4 (slick) 10-1/2 15-1/2 Front 014-1022 63.99 70-81 Camaro, Firebird GM (Both) 63-86 Malibu, 5 (Medium) 13 21 Rear 014-1030 63.99 Chevelle, Monte Carlo, 6 (Heavy) 13 21 Rear 014-1031 63.99 Cutlass, Grand Prix, GTO,, 3-5 Soft/Heavy 13 21 Rear 014-1035 63.99 Regal,Skylark, 68-79 Nova All 70-81 Camaro and Firebird 5 (Medium) 14-1/2 22-1/2 Rear 014-1032 63.99 6 (Heavy) 14-1/2 22-1/2 Rear 014-1033 63.99 3-5 (Soft/Hvy) 14-1/2 22-1/2 Rear 014-1034 63.99 1971-78 Pinto 5 (Medium) 9 11-5/8 Front 014-1040 63.99 5 (Medium) 10-3/4 16 Rear 014-1041 63.99 Mustang ll 74-78 5 (Medium) 9 11-5/8 Front 014-1040 63.99 5 (Medium) 11-1/4 17 Rear 014-1042 63.99 1979-83 Mustang, most Fords 5 (Medium) 13 21-1/2 Rear 014-1043 63.99 Shrader valve for Adjusting gas pressure Dry Slick Tracks Description Stroke Compression Rebound Part Number Price Left Front Non-Adjustable 6 4 valve 4 valve 048-2064 200.00 Left Front Eye Adjustable Rebound 7 3 valve 6.5 to 4.5 valve 048-E3376.5-4.5/3 650.00 Right Front Non-Adjustable 7 5 valve 3 valve 048-2073/5 200.00 Right Front Eye Adjustable Rebound 7 5 valve 6.5 to 2 valve 048-E3376.5-2/3 650.00 Left Rear Eye Adjustable Rebound 8 3 valve 10 to 8 valve 048-E34WINGLR5/3 650.00 Right Rear Eye Adjustable Rebound 9 5 valve 6 to 4 valve 048-E3376-4/5 650.00 Average to Fast Heavy Tracks Description Stroke Compression Rebound Part Number Price Left Front Non-Adjustable 6 4 valve 6 valve 048-2066/4 200.00 Left Front Eye Adjustable Rebound 7 3 valve 6.5 to 4.5 valve 048-E3376.5-4.5/3 650.00 Right Front Non-Adjustable 7 5 valve 5 valve 048-2075 200.00 Right Front Eye Adjustable Rebound 7 5 valve 6.5 to 2 valve 048-E3376.5-2/3 650.00 Left Rear Eye Adjustable Rebound 8 3 valve 10 to 8 valve 048-E34WINGLR5/3 650.00 Right Rear Eye Adjustable Rebound 9 5.5 valve 6 to 4 valve 048-E3396-4/5.5 650.00 Right Rear Eye Adjustable Compression 9 6.5-5 valve 5 valve 048-E3276-4/5 650.00 1020 / 1021 / 1022 1030 / 1031 / 1035 1032 / 1033 / 1034 Visit us at 5170 N 125th St. Butler WI 53007 or online at www.behlingracing.com 59 1040 1041 1042 1043 Eye Adjustable compression or rebound Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks

Shocks Coil Sp ri ngs Le a f S pr in gs S h o ck s Co il Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Economical sealed body shock Grooved for use in coil-over application Best twin tube value on the market 2.03 OD body Steel body Fixed bearing shock Comp/Reb 7 Stroke 9 Stroke Price 3 Valve 014-1473 014-1493 64.99 3-5 Valve 014-1473-5 014-1493-5 64.99 4 Valve 014-1474 014-1494 64.99 5 Valve 014-1475 014-1495 64.99 5-3 Valve 014-1475-3 014-1495-3 64.99 6 Valve 014-1476 014-1496 64.99 6-2 Valve 014-1476-2 **N/A** 64.99 7 Valve 014-1477 **N/A** 64.99 7-2 Valve **N/A** 014-1497-2 64.99 9-1 Valve 014-1479-1 **N/A** 64.99 Works with all shocks 014-A700500058 21.99 Steel body monotube shock Shock Compressed Extended 7 Stroke 12.85 19.76 9 Stroke 14.85 23.76 Schrader valve allows tuning with gas pressure Great performance on fast and rough tracks Grooved for coilover applications Racer rebuildable and revalveable 13T, 19, 23, and 24 Series wrench 014-A700500175 49.99 Schrader valve allows tuning Shock Compressed Extended 7 Stroke 12.95 18.85 9 Stroke 14.95 22.85 Comp/Reb 7 Stroke 9 Stroke Price 3 Valve 014-2373 014-2393 149.99 3-5 Valve 014-2373-5 014-2393-5 149.99 3-6 Valve 014-2373-6 014-2393-6 149.99 3-8 Valve 014-2373-8 014-2393-8 149.99 4 Valve 014-2374 014-2394 149.99 4-6 Valve 014-2374-6 014-2394-6 149.99 5 Valve 014-2375 014-2395 149.99 5-3 Valve 014-2375-3 014-2395-3 149.99 6 Valve 014-2376 014-2396 149.99 6-0 Valve 014-2376-0 014-2396-0 149.99 6-3 Valve 014-2376-3 014-2396-3 149.99 8-2 Valve 014-2378-2 014-2398-2 149.99 9-1 Valve 014-2379-1 014-2399-1 149.99 9-2 Valve 014-2379-2 014-2399-2 149.99 Twin tube design for those hard to get a hold of tracks Shim stack provides consistent results Owner rebuildable and serviceable Comp/Reb 7 Stroke 9 Stroke Price 3 Valve 014-1973 014-1993 149.99 3-5 Valve 014-1973-5 014-1993-5 149.99 4 Valve 014-1974 014-1994 149.99 4-6 Valve 014-1974-6 014-1994-6 149.99 5 Valve 014-1975 014-1995 149.99 5-3 Valve 014-1975-3 014-1995-3 149.99 6 Valve 014-1976 014-1996 149.99 6-2 Valve 014-1976-2 014-1996-2 149.99 6-4 Valve 014-1976-4 014-1996-4 149.99 8-2Valve 014-1978-2 014-1998-2 149.99 9-2Valve 014-1979-2 014-1999-2 149.99 OEM parts Tuning kits Other parts available Rebuild Kit Part Number Price Main shims 014-MT/TTSB 199.99 Base/Bleed Shims 014-19BV/AC 271.99 IMCA Legal Great performance on fast and rough tracks Grooved for coilover applications Racer rebuildable and revalveable Custom valving available Steel body monotube shock Shock Compressed Extended 7 Stroke 12.85 19.76 9 Stroke 14.85 23.76 Shock Compressed Extended 7 Stroke 12.95 18.85 9 Stroke 14.95 22.85 Comp/Reb 7 Stroke 9 Stroke Price 3 Valve 014-2473 014-2493 149.99 3-5 Valve 014-2473-5 014-2493-5 149.99 3-6 Valve 014-2473-6 014-2493-6 149.99 3-8 Valve 014-2473-8 014-2493-8 149.99 4 Valve 014-2474 014-2494 149.99 4-6 Valve 014-2474-6 014-2494-6 149.99 5 Valve 014-2475 014-2495 149.99 5-3 Valve 014-2475-3 014-2495-3 149.99 6 Valve 014-2476 014-2496 149.99 6-0 Valve 014-2476-0 014-2496-0 149.99 6-3 Valve 014-2476-3 014-2496-3 149.99 8-2 Valve 014-2478-2 014-2498-2 149.99 9-1 Valve 014-2479-1 014-2499-1 149.99 9-2 Valve 014-2479-2 014-2499-2 149.99 60 Call 800-255-4117 or 262-783-7474 for Current Pricing! Fax us 24hr at 262-783-6293

014-MT59506 14.99 Twin tube design and revalveable Aluminum threaded body The popular twin tube choice Uses coilover kit 014-20135 (sold separate) Shim stack technology Excellent consistency & repeatability Excellent on slick and smooth tracks Shock Compressed Extended 7 Stroke 13.32 20.25 9 Stroke 15.32 24.25 Comp/Reb 7 Stroke 9 Stroke Price 3 Valve 014-1373T 014-1393T 163.99 3-5 Valve 014-1373-5T 014-1393-5T 163.99 3-7 Valve 014-1373-7T **N/A** 163.99 4 Valve 014-1374T 014-1394T 163.99 4-6 Valve 014-1374-6T 014-1394-6T 163.99 5 Valve 014-1375T 014-1395T 163.99 5-3 Valve 014-1375-3T 014-1395-3T 163.99 5-6 Valve 014-1375-6T 014-1395-6T 163.99 6 Valve 014-1376T 014-1396T 163.99 6-2 Valve 014-1376-2T **N/A** 163.99 6-4 Valve 014-1376-4T **N/A** 163.99 7 Valve 014-1377T **N/A** 163.99 7-2 Valve **N/A** 014-1397-2T 163.99 9-1 Valve 014-1379-1T **N/A** 163.99 0 Dummy **N/A** 014-1390T 163.99 Monotube gas shock and revalveable Premium quality shock without the premium price DURox chrome shaft Asphalt valving: Big rebound valve codes built with high clamp force Includes tuning guide and second-to-none technical support Includes coilover hardware Adjustable compression and rebound Swivels 360 586-31030310-SG 82.50 OEM parts Tuning kits Other parts available Rebuild Kit Part Number Price Main shims 014-MT/TTSB 199.99 Base/Bleed Shims 014-19BV/AC 271.99 Twin tube design and revalveable Aluminum small body smooth The Popular wing sprint car choice Excellent consistency & repeatability Excellent on slick and smooth tracks Shim stack technology Shock Compressed Extended 7 Stroke 12.59 19.69 8 Stroke 13.59 21.69 9 Stroke 14.59 23.69 Comp/Reb 7 Stroke 8 Stroke 9 Stroke Price 3 Valve 014-1673S 014-1683S 014-1693S 159.99 3-5 Valve 014-1673-5S 014-1683-5S 014-1693-5S 159.99 3-6 Valve 014-1673-6S 014-1683-6S 014-1693-6S 159.99 3-8 Valve 014-1673-8S 014-1683-8S 014-1693-8S 159.99 4 Valve 014-1674S 014-1684S 014-1694S 159.99 4-5 Valve 014-1674-5S 014-1684-5S 014-1694-5S 159.99 4-6 Valve 014-1674-6S 014-1684-6S 014-1694-6S 159.99 4-7 Valve 014-1674-7S 014-1684-7S 014-1694-7S 159.99 5-2 Valve 014-1675-2S 014-1685-2S 014-1695-2S 159.99 5-3 Valve 014-1675-3S 014-1685-3S 014-1695-3S 159.99 5-4 Valve 014-1675-4S 014-1685-4S 014-1695-4S 159.99 5 Valve 014-1675S 014-1685S 014-1695S 159.99 5 Rough Track 014-1675RTS 014-1685RTS 014-1695RTS 159.99 5-6 Valve 014-1675-6S 014-1685-6S 014-1695-6S 159.99 6 Valve 014-1676S 014-1686S 014-1696S 159.99 6-2 Valve 014-1676-2S 014-1686-2S 014-1696-2S 159.99 Adjustable compression and rebound Recommended for Big Bar with Soft Spring Description Stroke Compression Rebound Part Number Price Left/Right Front double adjustable gas shock 7 3-6 valve 9-14 valve 014-62736-914Z 449.99 Left/Right Rear double adjustable gas shock 7 3-6 valve 3-6 valve 014-62736-36Z 449.99 Left/Right Rear double adjustable gas shock 9 3-6 valve 3-6 valve 014-62936-36Z 449.99 Recommended for Convetional Setup Description Stroke Compression Rebound Part Number Price Left/Right Front double adjustable gas shock 7 3-6 valve 7-12 valve 014-62736-712Z 449.99 Left/Right Rear double adjustable gas shock 7 3-6 valve 3-6 valve 014-62736-36Z 449.99 Left/Right Rear double adjustable gas shock 9 3-6 valve 3-6 valve 014-62936-36Z 449.99 Visit us at 5170 N 125th St. Butler WI 53007 or online at www.behlingracing.com 61 Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks

Shocks Coil Sp ri ngs Le a f S pr in gs S h o ck s Co il Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Monotube gas shock and revalveable Premium quality shock without the premium price DURox chrome shaft Latest technology in double adjustable shocks, including smart valving Includes tuning guide and second-to-none technical support Includes coilover hardware Adjustable compression and rebound Monotube gas shock and revalveable Premium quality shock without the premium price DURox chrome shaft Latest technology in double adjustable shocks, including smart valving Includes tuning guide and second-to-none technical support Includes coilover hardware Adjustable compression and rebound Adjustable compression and rebound Basic Track Conditions Description Stroke Compression Rebound Part Number Price Left/Right Front double adjustable gas shock 6 3-6 valve 4-8 valve 014-6260HSR 449.99 Left/Right Rear double adjustable gas shock 8 3-6 valve 3-6 valve 014-6280SA 449.99 Slick Track Conditions Description Stroke Compression Rebound Part Number Price Left Front double adjustable gas shock 6 3-6 valve 3-6 valve 014-6260 449.99 Right Front double adjustable gas shock 6 3-6 valve 4-8 valve 014-6260S 449.99 Left/Right Rear double adjustable gas shock 8 3-6 valve 3-6 valve 014-6280SA 449.99 Rough Track Conditions Description Stroke Compression Rebound Part Number Price Left Front double adjustable gas shock 6 3-6 valve 4-8 valve 014-6260HSR 449.99 Right Front double adjustable gas shock 6 3-6 valve 4-8 valve 014-6260HSR 449.99 Left/Right Rear double adjustable gas shock 8 3-6 valve 3-6 valve 014-6280SA 449.99 586-31030310-SG 82.50 586-31030310-SG 82.50 Adjustable compression and rebound Basic Track Conditions Description Stroke Compression Rebound Part Number Price Left Front double adjustable gas shock 7 3-6 valve 3-6 valve 014-6270 449.99 Right Front double adjustable gas shock 7 3-6 valve 4-8 valve 014-6270S 449.99 Left Rear Front / Traction double adj shock 9 3-6 valve 3-6 valve 014-6290LRF 449.99 Left Rear Behind shock double adj shock 9 3-6 valve 3-6 valve 014-6290RR 449.99 Right Rear double adjustable shock 9 3-6 valve 3-6 valve 014-6290RR 449.99 Fifth Coil / Torque Arm double adj shock 7 3-6 valve 3-6 valve 014-6270 449.99 Slick Track Conditions Description Stroke Compression Rebound Part Number Price Left Front double adjustable gas shock 7 3-6 valve 3-6 valve 014-6270 449.99 Right Front double adjustable gas shock 7 3-6 valve 4-8 valve 014-6270SX2 449.99 Left Rear Front / Traction double adj shock 9 3-6 valve 3-6 valve 014-6290LRF 449.99 Left Rear Behind shock double adj shock 9 3-6 valve 3-6 valve 014-6290RR 449.99 Right Rear double adjustable shock 9 3-6 valve 3-6 valve 014-6290S 449.99 Fifth Coil / Torque Arm double adj shock 7 3-6 valve 3-6 valve 014-6270 449.99 Rough Track Conditions Description Stroke Compression Rebound Part Number Price Left Front double adjustable gas shock 7 3-6 valve 3-6 valve 014-6270HSR 449.99 Right Front double adjustable gas shock 7 3-6 valve 4-8 valve 014-6270HSR 449.99 Left Rear Front / Traction double adj shock 9 3-6 valve 3-6 valve 014-6290LRF 449.99 Left Rear Behind shock double adj shock 9 3-6 valve 3-6 valve 014-6290RR 449.99 Right Rear double adjustable shock 9 3-6 valve 3-6 valve 014-6290RR 449.99 Fifth Coil / Torque Arm double adj shock 7 3-6 valve 3-6 valve 014-6270 449.99 62 Call 800-255-4117 or 262-783-7474 for Current Pricing! Fax us 24hr at 262-783-6293

Monotube gas shock and revalveable Premium quality shock without the premium price DURox chrome shaft Latest technology in double adjustable shocks, including smart valving Includes tuning guide and second-to-none technical support Adjustable compression and rebound Newest and hottest small body shock on the market Big adjustment at a small price Extra long hose and adjuster cable available Extremely low gas pressure needed Threaded body uses coilover kit 20123A (NOT included) Fits Steel body shocks Accepts big 5 spring Kit is made of aluminum Sold with 7 sleeve Threaded body Optional cockpit adjuster cable 20150 (NOT included) Basic, Slick and Rough Track Conditions Description Stroke Compression Rebound Part Number Price Left Front double adjustable gas shock 7 2-5 valve 2-8 valve 014-1672528 399.99 Right Front double adjustable gas shock 7 2-5 valve 1-5 valve 014-1672515 399.99 Left Rear double adjustable gas shock 8 2-6 valve 2-10 valve 014-16826210 399.99 Left Rear double adjustable gas shock 9 2-6 valve 2-10 valve 014-16926210 399.99 Right Rear double adjustable gas shock 9 3-6 valve 3-8 valve 014-1693638 399.99 Small body cockpit adjuster cable (NOT included) 014-20150 69.99 Small body Coilover kit (NOT included) 014-20123A 36.99 Fits Steel body shocks Accepts standard 2-5/8 I.D. spring Kit is made of aluminum Available with 5 or 7 sleeve Description 10 & 14 Series Price 19, 23 & 24 Series Price C/O kit w/5 sleeve 014-20125A 58.99 014-20125AR 58.99 C/O kit w/7 sleeve 014-20125A-7 65.99 014-20125A-7R 61.99 Spring Seat only 014-20128 21.99 014-20130C 22.99 Adjuster Nut only 014-20133 21.99 014-20133 21.99 5 sleeve only 014-20134 24.99 014-20134 24.99 7 sleeve only 014-20134-7 24.99 014-20134-7 24.99 Diaper pin only 014-10157 2.99 014-10157 2.99 Snap Ring only 014-10242 1.99 014-10242 1.99 Fits Aluminum threaded shocks Big Body accepts 2-5/8 spring Small body accepts 1-7/8 spring 014-20135 Pictured Accepts Big 5 OD Coil Spring Description Small Body Price Big Body Price Coilover Kit 014-20123A 39.99 014-20135 59.99 Spring Seat only 014-20129 21.99 014-20130C 22.99 Adjuster Nut only 014-20148 19.99 014-20131A 22.49 Retaining Ring 014-10243 4.49 014-10243 4.49 774-20144 44.99 Adjustable compression and rebound Optional Cockpit adjuster cable with mounting bracket Description 10 & 14 Series Price 19, 23 & 24 Series Price C/O kit w/7 sleeve 014-20125A-7K 104.99 014-20125A-7KR 104.99 Spring Seat only 014-20128 21.99 014-20130C 22.99 Adapter spring seat 014-20118 14.99 014-20118 14.99 Adjuster Nut only 014-20118-1X 44.99 014-20118-1X 44.99 7 sleeve only 014-20134-7 24.99 014-20134-7 24.99 Diaper pin only 014-10157 2.99 014-10157 2.99 Snap Ring only 014-10242 1.99 014-10242 1.99 This kit installs at the bottom of the 2-1/2 I.D. coil-over spring & allows easier adjustment of your ride height. 2 Beaings 4 Washers Convoluted bump rubbers fit on your shocks to prevent them from bottoming out and getting damaged on a rough track. They re cheap insurance for expensive shocks Not all bumpers include cone Bumper Standard End Standard w/come 014-20174 22.99 Blue Standard 014-20174-1 16.99 Yellow Medium 014-20174-2 19.99 Black Hard 014-20174-3 19.99 Alum Cone Only 014-20173 10.99 Visit us at 5170 N 125th St. Butler WI 53007 or online at www.behlingracing.com 63 Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks

Shocks Coil Sp ri ngs Le a f S pr in gs S h o ck s Co il Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Description Standard End Price 1 extension Price 2 extension Price Bearing Only Price 13T series big body threaded 014-20176 28.99 014-20176-1 31.99 014-20176-2 31.99 014-1000 10.99 16s series small body smooth 014-1007S 27.99 014-20178* 18.99 014-20178-1* 18.99 014-1000 10.99 16 Dbl Adj small body threaded 014-20172 41.95 ***N/A*** ***N/A*** 014-1000 10.99 19, 23, 24 steel body 014-20176S 24.95 014-20176-1S 29.95 014-20176-2S 29.95 014-1000 10.99 62 Series Dbl Adj big body threaded 014-20177 67.99 014-20177-1 89.99 014-20177-2 89.95 014-1000 10.99 * This is a shaft extension not an extended rod end Steel Body Non- Shock Can be mounted upside down for reduced unsprung weight Designed for coilover and non coil-over applications Cam Over Seal Design that eliminates over 60% of normal seal drag. 2.10 outer diameter bod 5/8 shaft diameter Comp/Reb 7 Stroke 9 Stroke Price 3 Valve 586-310-42173 586-310-42193 73.95 3-5 Valve 586-310-42173-5 586-310-42193-5 73.95 4 Valve 586-310-42174 586-310-42194 73.95 4-6 Valve 586-310-42174-6 586-310-42194-6 73.95 4-8 Valve 586-310-42174-8 ***N/A*** 73.95 5 Valve 586-310-42175 586-310-42195 73.95 5-3 Valve 586-310-42175-3 ***N/A*** 73.95 6 Valve 586-310-42176 586-310-42196 73.95 6-3 Valve 586-310-42176-3 586-310-42196-3 73.95 8-2 Valve ***N/A*** 586-310-42198-2 73.95 9-1 Valve 586-310-42179-1 ***N/A*** 73.95 Compression valve shims Rebound valve shims Reb bleed & comp cyl Rebound shims 5 shelf alum carrying bin Other rebuild parts 586-310-43240 538.00 Revolutionary Deflective Disc Valve Design makes this shock very consistent throughout the entire velocity range Mounted upside down for reduced unsprung weight Racer rebuildable, re-valvable, & repairable 12-1/2 Compression, 19-1/2 extension Custom valving is available 12mm shaft diameter and 1.75 OD body Shock Compressed Extended 7 Stroke 12.25 19.25 9 Stroke 14.85 23.76 Shock Compressed Extended 7 Stroke 12.5 19.5 9 Stroke 14.5 23.5 Comp/Reb 7 Stroke 9 Stroke Price 2-4 Valve ***N/A*** 586-310-43192-4 181.95 3 Valve 586-310-43173 586-310-43193 181.95 3-5 Valve 586-310-43173-5 586-310-43193-5 181.95 3-6 Valve 586-310-43173-6 ***N/A*** 181.95 3-7 Valve 586-310-43173-7 ***N/A*** 181.95 4 Valve 586-310-43174 586-310-43194 181.95 4-6 Valve 586-310-43174-6 586-310-43194-6 181.95 4-8 Valve 586-310-43174-8 ***N/A*** 181.95 5 Valve 586-310-43175 586-310-43195 181.95 5-3 Valve 586-310-43175-3 586-31043195-3 181.95 5-6 Valve 586-310-43175-3 ***N/A*** 181.95 6 Valve 586-310-43176 586-310-43196 181.95 6-2 Valve 586-310-43176-3 586-310-43196-2 181.95 6-3 Valve 586-310-43176-3 586-310-43196-3 181.95 6-4 Valve 586-310-43176-4 ***N/A*** 181.95 7 Valve 586-310-43177 ***N/A*** 181.95 8-2 Valve ***N/A*** 586-310-43198-2 181.95 9-1 Valve 586-310-43179-1 ***N/A*** 181.95 Fits shocks from 1-1/2 to 2-1/8 OD Specially sized rubber seals that conforms easily throught the range. 586-310-43244 27.99 376-19300 48.99 586-310-30900-1 19.00 64 Call 800-255-4117 or 262-783-7474 for Current Pricing! Fax us 24hr at 262-783-6293

Available in linear, digressive, and linear/digressive piston configurations Optional base valve design that helps eliminate rod pressure Machined snap ring grooves allow for coil over application 7 & 9 Steel Mono-Tube Shock Schrader Valve for nitrogen charging Specify valving, custom valving available For use in racing series that requires steel shocks Billet aluminum piston Nitrogen separator piston Owner serviceable, repairable and revalvable Linear Valving Base Valving Comp/Reb 7 Stroke 9 Stroke Price 7 Stroke 9 Stroke Price 3 Valve 586-310-40173S 586-310-40193S 324.95 586-310-40273S 586-310-40293S 425.00 3-5 Valve 586-310-40173-5S 586-310-40193-5S 324.95 586-310-40273-5S 586-310-40293-5S 425.00 3-6 Valve 586-310-40173-6S 586-310-40193-6S 324.95 586-310-40273-6S 586-310-40293-6S 425.00 3-8 Valve 586-310-40173-8S 586-310-40193-8S 324.95 586-310-40273-8S 586-310-40293-8S 425.00 4 Valve 586-310-40174S 586-310-40194S 324.95 586-310-40274S 586-310-40294S 425.00 4-6 Valve 586-310-40174-6S 586-310-40194-6S 324.95 586-310-40274-6S 586-310-40294-6S 425.00 5 Valve 586-310-40175S 586-310-40195S 324.95 586-310-40275S 586-310-40295S 425.00 5-3 Valve 586-310-40175-3S 586-310-40195-3S 324.95 586-310-40275-3S 586-310-40295-3S 425.00 6 Valve 586-310-40176S 586-310-40196S 324.95 586-310-40276S 586-310-40296S 425.00 6-0 Valve 586-310-40176-0S 586-310-40196-0S 324.95 586-310-40276-0S 586-310-40296-0S 425.00 6-3 Valve 586-310-40176-3S 586-310-40196-3S 324.95 586-310-40276-3S 586-310-40296-3S 425.00 8-2 Valve 586-310-40178-2S 586-310-40198-2S 324.95 586-310-40278-2S 586-310-40298-2S 425.00 9-1 Valve 586-310-40179-1S 586-310-40199-1S 324.95 586-310-40279-1S 586-310-40299-1S 425.00 9-2 Valve 586-310-40179-2S 586-310-40199-2S 324.95 586-310-40279-2S 586-310-40299-2S 425.00 Available in linear, digressive, and linear/digressive piston configurations Optional base valve design that helps eliminate rod pressure Machined snap ring grooves allow for coil over application 7 & 9 Steel Mono-Tube Shock Specify valving, custom valving available For use in racing series that requires steel shocks Billet aluminum piston Nitrogen separator piston Owner serviceable, repairable and revalvable No Schrader valve makes this shock IMCA Legal! 586-31030310-SG 82.50 Linear Valving Base Valving Comp/Reb 7 Stroke 9 Stroke Price 7 Stroke 9 Stroke Price 3 Valve 586-310-40173SNSV 586-310-40193SNSV 324.95 586-310-40273SNSV 586-310-40293SNSV 425.00 3-5 Valve 586-310-40173-5SNSV 586-310-40193-5SNSV 324.95 586-310-40273-5SNSV 586-310-40293-5SNSV 425.00 3-6 Valve 586-310-40173-6SNSV 586-310-40193-6SNSV 324.95 586-310-40273-6SNSV 586-310-40293-6SNSV 425.00 3-8 Valve 586-310-40173-8SNSV 586-310-40193-8SNSV 324.95 586-310-40273-8SNSV 586-310-40293-8SNSV 425.00 4 Valve 586-310-40174SNSV 586-310-40194SNSV 324.95 586-310-40274SNSV 586-310-40294SNSV 425.00 4-6 Valve 586-310-40174-6SNSV 586-310-40194-6SNSV 324.95 586-310-40274-6SNSV 586-310-40294-6SNSV 425.00 5 Valve 586-310-40175SNSV 586-310-40195SNSV 324.95 586-310-40275SNSV 586-310-40295SNSV 425.00 5-3 Valve 586-310-40175-3SNSV 586-310-40195-3SNSV 324.95 586-310-40275-3SNSV 586-310-40295-3SNSV 425.00 6 Valve 586-310-40176SNSV 586-310-40196SNSV 324.95 586-310-40276SNSV 586-310-40296SNSV 425.00 6-0 Valve 586-310-40176-0SNSV 586-310-40196-0SNSV 324.95 586-310-40276-0SNSV 586-310-40296-0SNSV 425.00 6-3 Valve 586-310-40176-3SNSV 586-310-40196-3SNSV 324.95 586-310-40276-3SNSV 586-310-40296-3SNSV 425.00 8-2 Valve 586-310-40178-2SNSV 586-310-40198-2SNSV 324.95 586-310-40278-2SNSV 586-310-40298-2SNSV 425.00 9-1 Valve 586-310-40179-1SNSV 586-310-40199-1SNSV 324.95 586-310-40279-1SNSV 586-310-40299-1SNSV 425.00 9-2 Valve 586-310-40179-2SNSV 586-310-40199-2SNSV 324.95 586-310-40279-2SNSV 586-310-40299-2SNSV 425.00 Visit us at 5170 N 125th St. Butler WI 53007 or online at www.behlingracing.com 65 Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks

Shocks Coil Sp ri ngs Le a f S pr in gs S h o ck s Co il Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Available in linear, digressive, and linear/digressive piston configurations Optional base valve design that helps eliminate rod pressure Machined snap ring grooves allow for coil over application 7 & 9 Aluminum Threaded body Mono-Tube Shock Schrader Valve for nitrogen charging Specify valving, custom valving available For use in racing series that requires steel shocks Billet aluminum piston Nitrogen separator piston Owner serviceable, repairable and revalvable Linear Valving Base Valving Comp/Reb 7 Stroke 9 Stroke Price 7 Stroke 9 Stroke Price 3 Valve 586-310-40173 586-310-40193 349.95 586-310-40273 586-310-40293 449.95 3-5 Valve 586-310-40173-5 586-310-40193-5 349.95 586-310-40273-5 586-310-40293-5 449.95 3-7 Valve 586-310-40173-7 586-310-40193-7 349.95 586-310-40273-7 586-310-40293-7 449.95 4 Valve 586-310-40174 586-310-40194 349.95 586-310-40274 586-310-40294 449.95 4-6 Valve 586-310-40174-6 586-310-40194-6 349.95 586-310-40274-6 586-310-40294-6 449.95 5 Valve 586-310-40175 586-310-40195 349.95 586-310-40275 586-310-40295 449.95 5-3 Valve 586-310-40175-3 586-310-40195-3 349.95 586-310-40275-3 586-310-40295-3 449.95 5-6 Valve 586-310-40175-6 586-310-40195-6 349.95 586-310-40275-6 586-310-40295-6 449.95 6 Valve 586-310-40176 586-310-40196 349.95 586-310-40276 586-310-40296 449.95 6-2 Valve 586-310-40176-2 586-310-40196-2 349.95 586-310-40276-2 586-310-40296-2 449.95 6-4 Valve 586-310-40176-4 586-310-40196-4 349.95 586-310-40276-4 586-310-40296-4 449.95 7 Valve 586-310-40177 586-310-40197 349.95 586-310-40277 586-310-40297 449.95 7-2 Valve 586-310-40177-2 586-310-40197-2 349.95 586-310-40277-2 586-310-40297-2 449.95 9-1 Valve 586-310-40179-1 586-310-40199-1 349.95 586-310-40279-1 586-310-40299-1 449.95 Kit includes (2) boxes containing rebuild valving parts for aluminum or steel stealth series shocks 586-310-30202 315.00 Double banded floating piston for optimum seal and low friction Pivots a full 360 degrees at both ends Features both a compression and rebound adjuster For all types of racing! Just let us know your application Custom valving available Specify Application Adjustable Rebound Works with all 40 series shocks 586-310-30312 27.99 Description Stroke Comp/Rebound Part Number Price Left Front double adjustable gas shock 7 Specify Application 586-310-40470-LF 699.95 Right Front double adjustable gas shock 7 Specify Application 586-310-40470-RF 699.95 Left Rear double adjustable shock 7 Specify Application 586-310-40470-LR 699.95 Left Rear double adjustable shock 9 Specify Application 586-310-40490-LR 699.95 Right Rear double adjustable shock 7 Specify Application 586-310-40470-RR 699.95 Right Rear double adjustable shock 9 Specify Application 586-310-40490-RR 699.95 586-310-30200 39.95 Adjustable Rebound Canister Mount Swivels 360 586-31030310-SG 82.50 1-3/4 586-310-30605 36.99 1-1/2 586-310-30604 39.99 1-1/4 586-310-30603 39.99 66 Call 800-255-4117 or 262-783-7474 for Current Pricing! Fax us 24hr at 262-783-6293

World Class piston design with larger disc diameter for more consistent damping force. Internal piston adjusting mechanism for compression and rebound 12 Position independent adjustment for BOTH rebound and compression Specially designed bladder and base valve technology Rod end selector for compression or rebound Includes coil-over kit For all types of racing! Just let us know your application Custom valving available World Class piston design Larger disc diameter for more consistent damping force Fits Aluminum threaded shocks Accepts 2-5/8 spring Coilover Kit 586-310-30200 39.95 Spring Seat only 586-310-30299 19.00 Adjuster Nut only 586-310-30298 19.50 Retaining Ring 586-310-30200-4 2.00 Fits steel body shocks Available for 2-1/2 & 5 spring Specify Application Description Stroke Comp/Rebound Part Number Price Left Front Internal double adjustable 7 Specify Application 586-310-60470-LF 799.95 Right Front Internal double adjustable 7 Specify Application 586-310-60470-RF 799.95 Left Rear Internal double adjustable 7 Specify Application 586-310-60470-LR 799.95 Left Rear Internal double adjustable 9 Specify Application 586-310-60490-LR 799.95 Right Rear Internal double adjustable 7 Specify Application 586-310-60470-RR 799.95 Right Rear Internal double adjustable 9 Specify Application 586-310-60490-RR 799.95 Swivels 360 Accepts double adjustable shock Quick release cam lever 1-3/4 Cam Clamp 586-310-30605 59.99 1-1/2 Cam Clamp 586-310-30604 59.99 1-1/4 Cam Clamp 586-310-30603 59.99 2-1/2 Springs 40 Steel Mono Price 43 Take-A-Part Price 42 Fixed Brg Price Kit for 2-1/2 Spring 586-310-30529 48.00 586-310-30528 48.00 586-310-30530 48.00 2-1/2 Seat only 586-310-30299 19.00 586-310-30299 19.00 586-310-30299-1 19.00 2-1/2 Adjuster Nut 586-310-30528N 14.95 586-310-30528N 14.95 586-310-30528N 14.95 5 Springs Kit for 5 Spring 586-310-30526 98.50 586-310-30527 98.95 586-310-30525 98.95 5 Seat only 586-310-30526C 29.95 586-310-30526C 29.95 586-310-30525C 29.95 5 Adjuster Nut only 586-310-30525N 29.95 586-310-30525N 29.95 586-310-30525N 29.95 Universal Parts Sleeve only 586-310-30526S 23.95 586-310-30527S 23.95 586-310-30525S 23.95 Diaper pin only 014-10157 2.99 014-10157 2.99 014-10157 2.99 Snap Ring only 586-310-30526SR 1.25 586-310-30527SR 1.25 586-310-30525SR 1.25 Retaing plate & scews ************** ************** 586-310-30525CP 7.75 Non-Adjustable Shock Ends Double Adjustable Remote Canister Style Double Adjustable IDA Style Adjustable compression and rebound Tumbler for IDA (Not included w/eye) Description Standard End Price 1 extension Price 2 extension Price Bearing Only Price 40S Series Steel Mono-Tube 586-310-30224 29.50 586-310-30403S 33.50 586-310-30404S 38.50 586-310-30327 6.00 40 Series Aluminum Mono-Tube 586-310-30402 28.50 586-310-30403 33.50 586-310-30404 38.50 586-310-30327 6.00 43 Series Take-A-Part Twin Tube 586-310-30224 29.50 586-310-30403S 33.50 586-310-30404S 38.50 586-310-30327 6.00 Double Adjustable Canister Style 586-310-30409 120.00 586-310-30409-1 130.00 ***N/A*** 586-310-30327 6.00 IDA eye (does NOT include tumbler) 586-310-60030-50 97.50 586-310-60029-50 107.50 ***N/A*** 586-310-30327 6.00 IDA Tumbler (NOT included w/eye) 586-310-60031 25.55 586-310-60031 25.55 ***N/A*** ***N/A*** Visit us at 5170 N 125th St. Butler WI 53007 or online at www.behlingracing.com 67 Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks

Shocks Coil Sp ri ngs Le a f S pr in gs S h o ck s Co il Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Monotube Shock Absorber Can be mounted upside down Linear and Digressive Valving Available Designed for unparalleled repeatability. 46mm Piston diameter Racer Revalveable and One-Piece Body Design Electroless Nickel Plated Body Deflective Disk Valving Custom Valving Available Schrader valve included for tunning Shock Compressed Extended 7 Stroke 13.00 20.50 9 Stroke 15.00 24.50 2.5 Coilover kit 5 Sleeve 608-CK5005 44.99 7 Sleeve 608-CK5007 55.99 IMCA LEGAL Monotube Shock Absorber Can be mounted upside down Linear and Digressive Valving Available Designed for unparalleled repeatability. 46mm Piston diameter Racer Revalveable and One-Piece Body Design Electroless Nickel Plated Body Deflective Disk Valving Custom Valving Available NO Schrader valve Shock Compressed Extended 7 Stroke 13.00 20.50 9 Stroke 15.00 24.50 2.5 Coilover kit 5 Sleeve 608-CK5005 44.99 7 Sleeve 608-CK5007 55.99 Designed to work with QA1 s Monotube shocks 5 Coilover kit 608-CK5009 75.99 5 Coilover kit 608-CK5009 75.99 Schrader valve (not pictured) Steel body monotube shock Linear Valving Digressive Valving Comp/Reb 7 Stroke 9 Stroke 7 Stroke 9 Stroke Price 3 Valve 608-2673M 608-2693M 608-2673 608-2693 119.99 3-5 Valve 608-2673-5M 608-2693-5M 608-2673-5 608-2693-5 119.99 3-7 Valve 608-2673-7M ********* 608-2673-7 ********* 119.99 4 Valve 608-2674M 608-2694M 608-2674 608-2694 119.99 5 Valve 608-2675M 608-2695M 608-2675 608-2695 119.99 5-3 Valve 608-2675-3M 608-2695-3M 608-2675-3 608-2695-3 119.99 6 Valve 608-2676M ********* 608-2676 ********* 119.99 6-2 Valve ********* 608-2696-2M ********* 608-2696-2 119.99 6-4 Valve 608-2676-4M ********* 608-2676-4 ********* 119.99 7 Valve 608-2677M ********* 608-2677 ********* 119.99 7-2 Valve ********* 608-2697-2M ********* 608-2697-2 119.99 7-3 Valve 608-2677-3M ********* 608-2677-3 ********* 119.99 8-2 Valve ********* 608-2698-2M ********* 608-2698-2 119.99 9-1 Valve ********* ********* ********* 608-2699-1B 119.99 Steel body monotube shock Linear Valving Digressive Valving Comp/Reb 7 Stroke 9 Stroke 7 Stroke 9 Stroke Price 3 Valve 608-26A73M 608-26A93M 608-26A73 608-26A93 119.99 3-5 Valve 608-26A73-5M 608-26A93-5M 608-26A73-5 608-26A93-5 119.99 3-7 Valve 608-26A73-7M Non-Stock 608-26A73-7 Non-Stock 119.99 4 Valve 608-26A74M 608-26A94M 608-26A74 608-26A94 119.99 5 Valve 608-26A75M 608-26A95M 608-26A75 608-26A95 119.99 5-3 Valve 608-26A75-3M 608-26A95-3M 608-26A75-3 608-26A95-3 119.99 6 Valve 608-26A76M Non-Stock 608-26A76 Non-Stock 119.99 6-2 Valve Non-Stock 608-26A96-2M Non-Stock 608-26A96-2 119.99 6-4 Valve 608-26A76-4M Non-Stock 608-26A76-4 Non-Stock 119.99 7 Valve 608-26A77M Non-Stock 608-26A77 Non-Stock 119.99 7-2 Valve Non-Stock 608-26A97-2M Non-Stock 608-26A97-2 119.99 7-3 Valve 608-26A7-37M Non-Stock 608-26A77-3 Non-Stock 119.99 8-2 Valve Non-Stock 608-26A98-2M Non-Stock 608-26A98-2 119.99 9-1 Valve Non-Stock Non-Stock Non-Stock 608-26A99-1B 119.99 Includes: O-rings, Seals, Assortment of defective disks and instructions Includes: Piston rod seal, O-rings & travel indicator Actual kit is not displayed Shock wrench works with 26, 26A, 28, 28A, 50 and 62 series QA1 5wt shock oil is specially formulated for use with QA1 shocksions 608-7791-140 123.99 608-TK08 209.99 608-RK10 21.49 608-7791-104 20.99 608-SF04 12.95 68 Call 800-255-4117 or 262-783-7474 for Current Pricing! Fax us 24hr at 262-783-6293

Monotube Shock Absorber Can be mounted upside down Linear and Digressive Valving Available Designed for unparalleled repeatability. 46mm Piston diameter Racer Revalveable and One-Piece Body Design Electroless Nickel Plated Body Deflective Disk Valving Custom Valving Available Schrader valve for tunning 2.5 Coilover kit 5 Sleeve 608-CK5005 44.99 7 Sleeve 608-CK5007 55.99 Designed to work with QA1 s Monotube shocks IMCA LEGAL Monotube Shock Absorber Can be mounted upside down Linear and Digressive Valving Available Designed for unparalleled repeatability. 46mm Piston diameter Racer Revalveable and One-Piece Body Design Electroless Nickel Plated Body Deflective Disk Valving Custom Valving Available NO Schrader valve 2.5 Coilover kit 5 Sleeve 608-CK5005 44.99 7 Sleeve 608-CK5007 55.99 586-31030310-SG 82.50 5 Coilover kit 608-CK5009 75.99 5 Coilover kit 608-CK5009 75.99 Schrader valve Includes: O-rings, Seals, Assortment of defective disks and instructions Comp/Reb Comp/Ext 7 Stroke Comp/Ext 9 Stroke Price 3 Valve 13.10 /20.10 608-2873 15.10 /24.10 608-2893 238.99 3-5 Valve 13.10 /20.10 608-2873-5 15.10 /24.10 608-2893-5 238.99 3-7 Valve 13.10 /20.10 608-2873-7 15.10 /24.10 ********* 238.99 4 Valve 13.10 /20.10 608-2874 15.10 /24.10 608-2894 238.99 5 Valve 13.10 /20.10 608-2875 15.10 /24.10 608-2895 238.99 5-3 Valve 13.10 /20.10 608-2875-3 15.10 /24.10 608-2895-3 238.99 6 Valve 13.10 /20.10 608-2876 15.10 /24.10 ********* 238.99 6-2 Valve 13.10 /20.10 ********* 15.10 /24.10 608-2896-2 238.99 6-4 Valve 13.10 /20.10 608-2876-4 15.10 /24.10 ********* 238.99 7 Valve 13.10 /20.10 608-2877 15.10 /24.10 ********* 238.99 7-2 Valve 13.10 /20.10 ********* 15.10 /24.10 608-2897-2 238.99 7-3 Valve 13.10 /20.10 608-2877-3 15.10 /24.10 ********* 238.99 8-2 Valve 13.10 /20.10 ********* 15.10 /24.10 608-2898-2 238.99 9-1 Valve 13.10 /20.10 ********* 15.10 /24.10 608-2899-1B 238.99 Includes: Piston rod seal, O-rings & travel indicator Actual kit is not displayed Shock wrench works with 26, 26A, 28, 28A, 50 and 62 series Steel body monotube shock Steel body monotube shock Comp/Reb Comp/Ext 7 Stroke Comp/Ext 9 Stroke Price 3 Valve 13.10 /20.10 608-28A73 15.10 /24.10 608-28A93 238.99 3-5 Valve 13.10 /20.10 608-28A73-5 15.10 /24.10 608-29A3-5 238.99 3-7 Valve 13.10 /20.10 608-28A73-7 15.10 /24.10 ********* 238.99 4 Valve 13.10 /20.10 608-28A74 15.10 /24.10 608-28A94 238.99 5 Valve 13.10 /20.10 608-28A75 15.10 /24.10 608-28A95 238.99 5-3 Valve 13.10 /20.10 608-28A75-3 15.10 /24.10 608-28A95-3 238.99 6 Valve 13.10 /20.10 608-28A76 15.10 /24.10 ********* 238.99 6-2 Valve 13.10 /20.10 ********* 15.10 /24.10 608-28A96-2 238.99 6-4 Valve 13.10 /20.10 608-28A76-4 15.10 /24.10 ********* 238.99 7 Valve 13.10 /20.10 608-28A77 15.10 /24.10 ********* 238.99 7-2 Valve 13.10 /20.10 ********* 15.10 /24.10 608-28A97-2 238.99 7-3 Valve 13.10 /20.10 608-28A77-3 15.10 /24.10 ********* 238.99 8-2 Valve 13.10 /20.10 ********* 15.10 /24.10 608-28A98-2 238.99 9-1 Valve 13.10 /20.10 ********* 15.10 /24.10 608-28A99-1B 238.99 QA1 5wt shock oil is specially formulated for use with QA1 shocksions 608-7791-140 123.99 608-TK08 209.99 608-RK10 21.49 608-7791-104 20.99 608-SF04 12.95 Visit us at 5170 N 125th St. Butler WI 53007 or online at www.behlingracing.com 69 Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks

Shocks Coil Sp ri ngs Le a f S pr in gs S h o ck s Co il Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Twin Tube Shock Absorber Can be mounted upside down Digressive Valving Designed for unparalleled repeatability. Racer Revalveable and 2.0 Steel body One-Piece Body Design Deflective Disk Valving Custom Valving Available IMCA Legal Shock Compressed Extended 7 Stroke 13.00 20.00 9 Stroke 15.00 24.00 Comp/Reb 7 Stroke 9 Stroke Price 3 Valve 608-5073 608-5093 99.99 3-5 Valve 608-5073-5 608-5093-5 99.99 4 Valve 608-5074 608-5094 99.99 4-3 Valve 608-5074-3 ********* 99.99 4-5 Valve ********* 608-5094-5 99.99 4-6 Valve 608-5074-6 608-5094-6 99.99 5 Valve 608-5075 608-5095 99.99 5-3 Valve 608-5075-3 608-5095-3 99.99 5-6 Valve 608-5075-6 608-5095-6 99.99 5-7 Valve 608-5075-7 ********* 99.99 5-9 Valve 608-5075-9 ********* 99.99 5-10 Valve 608-5075-10 ********* 99.99 6 Valve 608-5076 608-5096 99.99 6-3 Valve ********* 608-5096-3 99.99 6-4 Valve 608-5076-4 ********* 99.99 6-5 Valve 608-5076-5 ********* 99.99 7 Valve 608-5077 ********* 99.99 7-2 Valve ********* 608-5097-2 99.99 7-3 Valve ********* 608-5097-3 99.99 8-2 Valve ********* 608-5098-2 99.99 Dummy 608-507D 608-509D 99.99 All steel body shocks Sleeve Part Number Price 5 608-CK5005 44.99 7 608-CK5007 55.99 Includes: Piston rod seal, O-rings & travel indicator 50 Series 608-RK02 9.59 62 Series 608-RK01 9.59 All steel body shocks 608-CK5009 75.99 Shock wrench works with 26, 26A, 50 and 62 series Twin Tube Shock Absorber Can be mounted upside down Digressive Valving Designed for unparalleled repeatability. Racer Revalveable and Large body threaded shock One-Piece Body Design Deflective Disk Valving Custom Valving Available Shock Compressed Extended 7 Stroke 13.00 20.00 9 Stroke 15.00 24.00 Aluminum threaded body 608-CK6201 31.99 Comp/Reb 7 Stroke 9 Stroke Price 3 Valve 608-6273 608-6293 143.99 3-5 Valve 608-6273-5 608-6293-5 143.99 4 Valve 608-6274 608-6294 143.99 4-3 Valve ********* 608-6294-3 143.99 4-5 Valve ********* 608-6294-5 143.99 4-6 Valve 608-6274-6 608-6294-6 143.99 5 Valve 608-6275 608-6295 143.99 5-3 Valve 608-6275-3 608-6295-3 143.99 5-4 Valve 608-6275-4 ********* 143.99 5-6 Valve 608-6275-6 608-6295-6 143.99 5-7 Valve 608-6275-7 608-6295-7 143.99 6 Valve 608-6276 608-6296 143.99 6-4 Valve 608-6276-4 ********* 143.99 6-5 Valve ********* 608-6296-5 143.99 6-7 Valve 608-6276-7 ********* 143.99 7 Valve 608-6277 608-6297 143.99 7-10 Valve ********* 608-6297-10 143.99 Fits 62 Series aluminum threaded body 608-CK6201 31.99 Replacement shock ends fit all QA1 shocks. Ends are 9/16-20 and available in aluminum and steel, they include bearing Includes: O-rings, Seals, Assortment of defective disks and instructions 50 & 62 Series 608-TK01 147.99 Replacement bearing and clips for all QA1 shocks. Kit does both ends of shock (2 bearings & 4 clips) Aluminum 608-9036-104 24.95 608-7791-104 20.99 Steel 608-9036-103 19.95 608-EMB8-101PK 25.99 70 Call 800-255-4117 or 262-783-7474 for Current Pricing! Fax us 24hr at 262-783-6293

The 8300 Series double adjustable shock absorber provides more adjustability options and features to the serious racer. The double adjustable, coilover damper is suitable for a variety of applications. The rebound adjuster features 25 sweeps of bleed adjustment in the shaft. The compression adjuster features 20 clicks of linear-stepped adjustment. This is accomplished by a parabolic needle valve that adjusts a fluid bypass past a standard shim stack. The 8300 Series is available in a pibbyback or remote style mount. Description Valve Part Number Price 7 Stroke Double Adjustable shock Specify 174-PS-83DA-7 725.00 9 Stroke Double Adjustable shock Specify 174-PS-83DA-9 725.00 # Part 1 1.025 SPIROLOC, STAINLESS 174-RR-16 0.80 2 MONOBALL,.500 ID X 1.00 OD 174-MO-8T 17.85 MONOBALL, 15MM ID X 1.00 OD 174-MO-15T 18.40 3 BODYCAP, 8300 0 174-BC-830 108.15 BODYCAP, 8300 90 174-BC-8390 108.15 4 RIDE HEIGHT, 8300 2.25 174-RH-83225 58.50 RIDE HEIGHT, 8300 2.50 174-RH-83250 58.50 5 BODY, 8300 C/O 10-24 ALUMINUM 174-BD-83 155.00 6 SHAFT, ADJ 10-24 174-SH- 163.00 7 SPRING RETAINER, 8100 2.50 174-SR-81250 50.40 8 O-RING, 2-221 BUNA 70 DURO 174-OR-2221-B 0.75 9 SCREW M6 X 8MM STEEL W/NYLON 174-SC-M6M8-S 5.00 10 O-RING, 2-221 BUNA 70 DURO 174-OR-2221-B 0.75 11 O-RING, 2-114 VITON 75 DURO 174-OR-2114-V 1.00 12 SHAFT WIPER,.625 POLY (BLUE) 174-SL-09 7.30 13 BUSHING, DU.625 X.625 174-BU-10DU10 6.00 14 SHAFT BEARING, 8760 174-SB-765 53.55 15 NEEDLE, 8760 174-NE-76 23.00 16 O-RING, 2-007 BUNA 70 DURO 174-OR-2007-B 0.50 17 METERING ROD 174-MR-ROD 28.00 18 JAM NUT,.625 X 18 174-NT-04J 10.70 19 REBOUND SCREW, ADJ SHAFT 174-RS-81 17.80 20 O-RING, 2-008 BUNA 70 DURO 174-OR-2008-B 0.50 21 EYELET, 8100 1.60 SWEEP 0 174-EY-81160 59.60 EYELET, 8100 1.60 SWEEP NO HOLE 174-EY-81160NH 59.60 EYELET, 8100 1.60 SWEEP 90 174-EY-811690 59.60 EYELET, 8100 2.00 SWEEP 0 174-EY-81200 80.00 EYELET, 8100 2.30 SWEEP 0 174-EY-81230 80.00 22 RESERVOIR BODY, (4-7 ) 174-RB-76_ 90.00 23 PISTON, 8760 RESERVOIR 174-PI-76 48.70 24 QUAD RING,4-222 BUNA 70 DURO 174-OR-4222-B 2.25 25 SCREW, SHCS 4-40 X1/4 174-SC-18 0.50 26 SEAL, DOWTY 174-SL-87 3.85 27 O-RING, 2-222 BUNA 70 DURO 174-OR-2222-B 1.00 28 WIRE RING,.0625 X 1.900 174-RR-06 3.95 29 CAP, RESERVOIR PORT O-RING 174-CP-76 44.50 30 O-RING, 2-010 BUNA 70 DURO 174-OR-2010-B 0.75 31 AIR VALVE, PORT O-RING, ALUM. 174-IU-20-A 15.90 Aluminum threaded body Adjustable gas pressure Double Adjustable # Part 32 VALVE CAP, HIGH TEMPERATURE 174-IU-06 0.90 33 VALVE CORE, 2000 PSI 174-IU-04 2.60 34 JET, 8300 CD ADJUSTER 174-JT-83LS 50.10 35 O-RING, 2-012 BUNA 70 DURO 174-OR-2012-B 0.50 36 O-RING, 2-028 BUNA 70 DURO 174-OR-2028-B 0.75 37 O-RING, 2-013 BUNA 70 DURO 174-OR-2013-B 0.75 38 SCREW, SOCKET SET8/32 X 1/8 174-SC-08 0.85 39 SPRING, (A109) 174-SP-14 2.90 40 BALL, 1/8 STEEL 174-BA-125-ST 0.50 41 KNOB, 8300 CD ADJUSTER 174-KN- 83LS 28.10 42 SCREW, 8300 CD ADJUSTER 174-SC-83LS 15.25 43 O-RING, 4 MM X1 MM BUNA 174-OR-4MMX1MM-B 1.00 44 WASHER, 8300 CD ADJUSTER 174-VW-83CD 1.25 45 CRUSH WASHER,.25 ID. COPPER 174-VW-01-C 0.95 46 O-RING, 2-222 BUNA 70 DURO 174-OR-2222-B 1.00 47 SCREW, 1/2-20 X 3/4 174-SC-06 1 0.50 48 WASHER, 1.200 X.012 X.500 VALVE 174-VW-120012 1.50 49 WASHER, 1.050 X.012 X.500 VALVE 174-VW-105012 1.50 50 WASHER,.900 X.012 X.500 VALVE 174-VW-90012 1.50 51 O-RING, 2-028 BUNA 70 DURO 174-OR-2028-B 0.75 52 PISTON BAND, 55MM 174-PB-55 15.70 53 PISTON 174-PI- 62.70 54 RING NUT,.500 X 20,. 440 LONG 174-NT-02R 12.20 55 JET, RD STRAIGHT THRU 174-JT-RDHSNG 54.50 56 RETAINING RING,.250 INTERNAL 174-RR-05 0.80 57 JET, TOP HAT 174-JT-76HAT 11.65 58 SPRING, (FF71) 174-SP-15 2.90 59 JET, POPPET 174-JT-76POP 19.65 60 VALVE STACK, (AA-F) 174-VS- 6.95 61 TOP OUT PLATE, 1.375 X.500 174-VW-99 4.85 62 WASHER,.750 X.020 X.500 VALVE 174-VW-75020 1.55 63 PISTON, 8300 CD ADJUSTER 174-PI-83CD 71.25 64 HOUSING, 8300 SIDE, BANJO 174-HG-83SIDE 111.40 65 SCREW, SOCKET SET 6-32 X.500 174-SC-91 0.50 66 DOWEL PIN, 1/16 X 3/8 174-DO-06 0.95 67 SPRING, (TA2086) 174-SP-10 2.90 68 BALL, 1/4 STEEL 174-BA-250-ST 0.50 69 HOSE, 8300 (6-36 ), SWIVEL HEAD 174-HO-83 -SW 98.85 Visit us at 5170 N 125th St. Butler WI 53007 or online at www.behlingracing.com 71 Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks

Shocks Coil Sp ri ngs Le a f S pr in gs S h o ck s Co il Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks The 7500 Series is our most popular short track shock option, featuring an aluminum body and nitrogen separator piston for increased performance. This damper is offered in a coilover or non-coilover style in all body lengths and is available as sealed, non-adjustable unit or with a single shaft adjuster. Single shaft adjuster options include rebound, compression, or open bleed bypass. A selection of fixed bleed jets are available for the non-adjustable version. The 7500 series is offered with either a 5/8 or 3/4 diameter shaft depending on the application. For Adjustable gas pressure increased accessibility, a remote cockpit adjuster is available as an additional option. Description Valve Part Number Price 7 Stroke Single Adjustable shock Specify 174-PS-75COSA-7 420.00 9 Stroke Single Adjustable shock Specify 174-PS-75COSA-9 420.00 Item Description Part Number 1 BODY CAP, 7500 NO VALVE SEALED 174-BC75NV 70.00 BODY CAP, 7500 W/TANK VALVE 174-BC75TV 70.00 2 AIR VALVE, PORT O-RING, S.S. 174-IU22S 14.00 3 VALVE CAP, HIGH TEMPERATURE 174-IU06 0.90 4 VALVE CORE, 2000 PSI 174-IU04 2.60 5 O-RING, 2-010 BUNA 70 DURO 174-OR2010B 0.75 6 RIDE HEIGHT, 7500 2.25 174-RH75225 41.45 RIDE HEIGHT, 7500 2.50 174-RH75250 41.45 7 BODY, 7500 C/O 10.503 174-BD757CO 120.00 BODY, 7500 C/O 12.770 174-BD759CO 120.00 8 SHAFT, 7500 ADJ 10.000 174-SH75A7 110.00 SHAFT, 7500 ADJ 11.875 174-SH75A9 110.00 9 SPRING RETAINER, 7500 2.50 174-SR75250 29.25 SPRING RETAINER, 7500 2.50 FLAT 174-SR75250F 29.25 10 RETAINING PIN, 7500 SPRING RETAINER 174-RR42 1.95 11 EYELET, 7500 1.60 SWEEP 0 174-EY75160 54.50 EYELET, 7500 1.60 SWEEP 90 174-EY751690 47.50 12 MONOBALL,.500 ID X 1.00 OD X.625W 174-MO09 12.95 13 RET. RING, 1.025 SPIROLOC, STAINLESS 174-RR16 0.80 14 O-RING, 2-133 BUNA 70 DURO 174-OR2133B 1.00 15 QUAD RING, 4-221 BUNA 70 DURO 174-OR4221B 3.00 16 PISTON, 7500 FLOATING 174-PI75 19.90 17 WIRE RING,.0625 WIRE DIAM.X1.900 174-RR06 3.95 18 PISTON 174-PI-HF00005 62.70 Threaded body shock Adjustable at shock eye Item Description Part Number 19 PISTON BAND, 55MM 174-PB55 15.70 20 O-RING, 2-028 BUNA 70 DURO 174-OR2028B 0.75 21 VALVE STACK (AA - F) 174-VS 6.95 22 TOP OUT PLATE, 1.375 X.500 174-VW99 4.85 23 METERING ROD 174-MRROD 28.90 24 RETAINING RING,.250 INTERNAL 174-RR05 0.80 25 JET, RD STRAIGHT THRU 174-JTRDHSNG 54.50 JET, REBOUND (ITEMS 24-28) 174-JT76RD 82.70 JET, COMPRESSION 174-JT76CD 89.85 26 JET, TOP HAT 174-JT76HAT 11.65 27 SPRING, (FF71) 174-SP15 2.90 28 JET, POPPET 174-JT76POP 19.65 29 RING NUT,.500 X 20,.440 LONG 174-NT02R 12.20 30 O-RING, 2-221 BUNA 70 DURO 174-OR2221B 0.75 31 BUSHING, DU.625 X.625 174-BU10DU10 6.00 32 SHAFT BEARING, 7500 THREADED 174-SB75TH 53.55 33 O-RING, 2-114 VITON 75 DURO 174-OR2114V 1.00 34 SHAFT WIPER,.625 POLY (BLUE) 174-SL09 7.30 35 O-RING, 2-007 BUNA 70 DURO 174-OR2007B 0.50 36 NEEDLE, 8760 174-NE76 23.00 37 JAM NUT,.625 X 18 174-NT04J 10.70 38 O-RING, 2-008 BUNA 70 DURO 174-OR2008B 0.50 39 REBOUND SCREW, ADJ SHAFT 174-RS81 17.80 72 Call 800-255-4117 or 262-783-7474 for Current Pricing! Fax us 24hr at 262-783-6293

The 7500 Series is our most popular short track shock option, featuring an aluminum body and nitrogen separator piston for increased performance. This damper is offered in a coilover or non-coilover style in all body lengths and is available as sealed, non-adjustable unit or with a single shaft adjuster. Single shaft adjuster options include rebound, compression, or open bleed bypass. A selection of fixed bleed jets are available for the non-adjustable version. The 7500 series is offered with either a 5/8 or 3/4 diameter shaft depending on the application. For increased accessibility, a remote Adjustable gas pressure cockpit adjuster is available as an additional option. Description Valve Part Number Price 7 Stroke Threaded Body shock Specify 174-PS-75CONA-7 315.00 9 Stroke Threaded Body shock Specify 174-PS-75CONA-9 315.00 Item 1 VALVE CAP, HIGH TEMPERATURE 174-IU-06 0.90 2 VALVE CORE, 2000 PSI 174-IU-04 2.60 3 AIR VALVE, PORT O-RING, S.S. 174-IU-22-S 14.00 4 O-RING, 2-010 BUNA 70 DURO 174-OR-2010-B 0.75 5 BODY CAP, 7500 NO VALVE SEALED 174-BC-75NV 70.00 BODY CAP, 7500 W/TANK VALVE 174-BC-75TV 70.00 6 BODY, 7500 C/O 10.503 174-BD757CO 120.00 BODY, 7500 C/O 12.770 174-BD759CO 120.00 7 SHAFT, 7500 NON ADJ 10.000 174-SH-75NA7 40.25 SHAFT, 7500 NON ADJ 11.875 174-SH-75NA9 40.25 8 JAM NUT,.625 X 18 174-NT-04J 10.70 9 EYELET, 7500 NON-ADJ 174-EY-75NA 39.15 10 WIRE RING,.0625 WIRE DIAM.X1.900 174-RR-06 3.95 11 PISTON, 7500 FLOATING 174-PI-75 19.90 12 QUAD RING, 4-221 BUNA 70 DURO 174-OR-4221-B 3.00 13 MONOBALL,.500 ID X 1.00 OD X.625W 174-MO-09 12.95 14 RET. RING, 1.025 SPIROLOC, STAINLESS 174-RR-16 0.80 15 O-RING, 2-133 BUNA 70 DURO 174-OR-2133-B 1.00 16 JET,.000 BLEED 174-JT-000 11.40 JET,.020 BLEED 174-JT-020 13.60 Desription 7500 Series Shock 8300 Sereis Shock Price Seat (Cone) 174-SR-75250 174-SR-83250 50.40 Adjuster Nut 174-RH-75250 174-RH83250 48.30 Threaded body shock Item 16 JET,.040 BLEED 174-JT-040 13.60 JET,.070 BLEED 174-JT-070 11.40 JET, 7300 RD NON-ADJ/CHECKBALL 174-JT-73RD 32.00 17 RING NUT,.500 X 20,.440 LONG 174-NT-02R 12.20 18 PISTON 174-PI-HF00005 62.70 19 PISTON BAND, 55MM 174-PB-55 15.70 20 O-RING, 2-028 BUNA 70 DURO 174-OR-2028-B 0.75 21 VALVE STACK (AA - F) 174-VS- 6.95 22 WASHER,.750 X.020 X.500 VALVE 174-VW-75020 1.55 23 TOP OUT PLATE, 1.375 X.500 174-VW-99 4.85 24 O-RING, 2-221 BUNA 70 DURO 174-OR-2221-B 0.75 25 BUSHING, DU.625 X.625 174-BU-10DU10 6.00 26 SHAFT BEARING, 7500 THREADED 174-SB-75TH 53.55 27 O-RING, 2-114 VITON 75 DURO 174-OR-2114-V 1.00 28 SHAFT WIPER,.625 POLY (BLUE) 174-SL-09 7.30 Inflation unit works with all schrader valve shocks. Shock wrench works with all current penske shocks 174-TL-COMPUNIT 99.75 174-TL-76W 21.00 Visit us at 5170 N 125th St. Butler WI 53007 or online at www.behlingracing.com 73 Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks

Shocks Coil Sp ri ngs Le a f S pr in gs S h o ck s Co il Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Description Valve Part Number Price 7 Stroke Smooth Steel Body Shock Specify 174-PS-71NA-7 205.00 9 Stroke Smooth Steel Body Shock Specify 174-PS-71NA-9 205.00 Item 1 BODY CAP, 7500 W/TANK VALVE 174-BC75TV 70.00 BODY CAP, 7500 NO VALVE SEALED 174-BC75NV 70.00 2 AIR VALVE, PORT ORING, S.S. 174-IU22S 14.00 3 VALVE CAP, HIGH TEMPERATURE 174-IU06 0.90 4 VALVE CORE, 2000 PSI 174-IU04 2.60 5 ORING, 2010 BUNA 70 DURO 174-OR2010B 0.75 6 BODY, 7100 9.400 STEEL 174-BD717 57.95 BODY, 7100 11.400 STEEL 174-BD719 57.95 7 SHAFT, NONADJ 10.500 174-SHNA7 57.35 SHAFT, NONADJ 12.500 174-SHNA9 57.35 8 JAM NUT,.625 X 18 174-NT04J 10.70 9 EYELET, 7500 NONADJ 174-EY75NA 39.15 10 RET RING, 1.025 SPIROLOC, STAINLESS 174-RR16 0.80 11 MONOBALL,.500 ID X 1.00 OD X.625W 174-MO09 12.95 12 ORING, 2221 BUNA 70 DURO 174-OR2221B 0.75 13 JET,.000 BLEED 174-JT000 11.40 Inflation unit works with all schrader valve shocks. 174-TL-COMPUNIT 99.75 Shock wrench works with all current penske shocks 174-TL-76W 21.00 Steel body shock Adjustable gas pressure Item 13 JET,.020 BLEED 174-JT020 13.60 JET,.040 BLEED 174-JT040 13.60 JET,.070 BLEED 174-JT070 11.40 JET, 7300 RD NONADJ/CHECKBALL 174-JT73RD 32.00 14 RING NUT,.500 X 20,.440 LONG 174-NT02R 12.20 15 PISTON 174-PI-HF00005 62.50 16 ORING, 2028 BUNA 70 DURO 174-OR2028B 0.75 17 PISTON BAND, 55MM 174-PB 15.70 18 VALVE STACK, (AA F) 174-VS 6.95 19 WASHER,.750 X.020 X.500 VALVE 174-VW75020 1.55 20 TOP OUT PLATE, 1.375 X.500 174-VW99 4.85 21 BUSHING, DU.625 X.625 174-BU10DU10 6.00 22 ORING, 2221 BUNA 70 DURO 174-OR2221B 0.75 23 ORING, 2114 VITON 75 DURO 174-OR2114V 1.00 24 SHAFT BEARING, 8760 174-SB765 53.55 25 SHAFT WIPER,.625 POLY (BLUE) 174-SL09 7.30 Available in 2.5 and 5wt Sold by the quart Weight Part Number Price 2.5 174-AC-OIL25Q 19.95 5.0 174-AC-OIL50Q 19.95 Fits Penske steel body shock 586-100-24-605-7BK 48.00 74 Call 800-255-4117 or 262-783-7474 for Current Pricing! Fax us 24hr at 262-783-6293

OEM Replacement parts For revalving and servicing Includes A-D shims and seals Call for complete listing of parts 174-KT-STVW 230.80 Made with the same high quality as all pro shocks Made to be a direct stock replacement Available as an adjustable shock Description Mount Comp Ext Stroke Part Number Price GM full-size and mid-size Front 8.5 13.1 4.6 606-SS100 58.99 Chevelle, Monte Carlo, Rear 12.75 20.95 8.2 606-SS201 58.99 Cutlass, Grand Prix, GTO Tempest, Regal and Skylark Camaro and Firebird 70-81 Front 8.5 13.1 4.6 606-SS100 58.99 Rear 12.85 21.69 8.84 606-SS200 58.99 Ford full-size and mid-size Front 8.5 13.1 4.6 606-SS100 58.99 Mercury and Cougar Rear 12.85 21.69 8.84 606-SS400 58.99 Mustang ll 74-78 Front 7.26 10.72 3.45 606-SS300 58.99 Rear 9.81 15.81 6 606-SS402 58.99 Mustang Rear 12.85 21.69 8.84 606-SS400 58.99 Pinto 71-80 (Except SW) Front 7.26 10.72 3.45 606-SS300 58.99 Rear 8.77 14.17 5.4 606-SS401 58.99 In order to adjust the shock compress the shaft all the way in. Keep light pressure on the collapsed shaft and turn counter-clockwise until you feel tang drop into slot. As you rotate clockwise there will be 3 sets of 3 different adjustments (9 positions). Continue to rotate until the mark on the shaft aligns with the desired dampening letter, marked on the shock body. If you don t know what postion the shock is in you should be able to tell by cycling the shock a couple of times and notice the difference in dampening force. Description Mount Comp Ext Stroke Part Number Price GM full-size and mid-size Front 8.5 13.1 4.6 606-SS100A 65.99 Chevelle, Monte Carlo, Cutlass, Grand Prix, GTO Tempest, Regal and Skylark Ford full-size and mid-size Mercury and Cougar Camaro and Firebird 70-81 Camaro and Firebird 70-81 Rear 12.85 21.69 8.84 606-SS200A 65.99 Chevelle, Monte Carlo, Rear 12.75 20.95 8.2 606-SS201A 65.99 Cutlass, Grand Prix, GTO Tempest, Regal and Skylark Valve 1.35 OD 1.20 OD 1.05 OD.900 OD.750 OD Part Number Price AA.004.004.004.004.020 174-VS-AA 6.95 AA+.004.004.006.006.020 174-VS-AAP 6.95 A-.006.006.004.004.020 174-VS-AM 6.95 A.006.006.006.006.020 174-VS-A 6.95 A+.006.006.008.008.020 174-VS-AP 6.95 B-.008.008.006.006.020 174-VS-BM 6.95 B.008.008.008.008.020 174-VS-B 6.95 B+.008.008.010.010.020 174-VS-BP 6.95 C-.010.010.008.008.020 174-VS-CM 6.95 C.010.010.010.010.020 174-VS-C 6.95 C+.010.010.012.012.020 174-VS-CP 6.95 D-.012.012.010.010.020 174-VS-DM 6.95 D.012.012.012.012.020 174-VS-D 6.95 D+.012.012.015.015.020 174-VS-DP 6.95 E-.015.015.012.012.020 174-VS-EM 6.95 E.015.015.015.015.020 174-VS-E 6.95 E+.015.015.020.020.020 174-VS-EP 6.95 F-.020.020.015.015.020 174-VS-FM 6.95 F.020.020.020.020.020 174-VS-F 6.95 Visit us at 5170 N 125th St. Butler WI 53007 or online at www.behlingracing.com 75 SS100 SS200 SS201 SS300 SS400 SS401 SS402 SS100A SS200A SS201A Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks

Shocks Coil Sp ri ngs Le a f S pr in gs S h o ck s Co il Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks The WB series shocks are in an inexpensive, welded bearing shock that are designed especially for non-coil over applications Includes bearing ends and travel indicator These shocks can be mounted upside down Comp/Reb 7 Stroke 9 Stroke Price 3 Valve ********* 606-WB93 65.99 3-5 Valve 606-WB735 606-WB935 65.99 4 Valve 606-WB74 606-WB94 65.99 4-6 Valve 606-WB746 606-WB946 65.99 5 Valve 606-WB75 606-WB95 65.99 5-3 Valve 606-WB753 606-WB953 65.99 6 Valve 606-WB76 606-WB96 65.99 6-3 Valve 606-WB763 ********* 65.99 7 Valve 606-WB77 606-WB97 65.99 8 Valve 606-WB78 ********* 65.99 9-1 Valve 606-WB791 ********* 65.99 Aluminum threaded body Large body shock These shocks can be mounted upside down Includes shock ends and travel indicator Uses coilover kit 606-C320 Shock Comp Ext 7 Stroke 12.50 19.50 9 Stroke 14.50 23.50 Aluminum Smooth Body Shock Comp Ext 7 Stroke 12.50 19.50 9 Stroke 14.50 23.50 Comp/Reb 7 Stroke 9 Stroke Price 3 Valve 606-AC730B 606-AC930B 164.99 3-5 Valve 606-AC735B 606-AC935B 164.99 3-6 Valve 606-AC736B 606-AC936B 164.99 3-8 Valve *********** 606-AC938B 164.99 4 Valve 606-AC740B 606-AC940B 164.99 4-2 Valve 606-AC742B *********** 164.99 4-6 Valve 606-AC746B 606-AC946B 164.99 4-7 Valve *********** 606-AC947B 164.99 5 Valve 606-AC750B 606-AC950B 164.99 5-1 Valve 606-AC751B *********** 164.99 5-2 Valve 606-AC752B *********** 164.99 5-3 Valve 606-AC753B 606-AC953B 164.99 5-4 Valve 606-AC754B 606-AC954B 164.99 5-6 Valve 606-AC756B 606-AC956B 164.99 5-7 Valve 606-AC757B 606-AC957B 164.99 6 Valve 606-AC760B 606-AC960B 164.99 6-3 Valve 606-AC763B 606-AC963B 164.99 6-4 Valve 606-AC764B 606-AC964B 164.99 7 Valve 606-AC770B 606-AC970B 164.99 8 Valve 606-AC780B 606-AC980B 164.99 9-1 Valve 606-AC791B ********* 164.99 Comp/Reb 7 Stroke 9 Stroke Price 3 Valve 606-TA7300 606-TA9300 98.99 3-8 Valve ********* 606-TA9380 98.99 4 Valve 606-TA7400 606-TA9400 98.99 4-6 Valve 606-TA7460 ********* 98.99 5 Valve 606-TA7500 606-TA9500 98.99 5-3 Valve 606-TA7530 ********* 98.99 6 Valve ********* 606-TA9560 98.99 6 Valve 606-TA7600 606-TA9600 98.99 6-3 Valve 606-TA7630 ********* 98.99 7 Valve 606-TA7700 606-TA9700 98.99 8 Valve 606-TA7800 606-TA9800 98.99 9-1 Valve 606-TA7910 ********* 98.99 Aluminum Smooth body Large body shock These shocks can be mounted upside down Includes shock ends and travel indicator Popular choice for sprint cars Shock Comp Ext 7 Stroke 12.50 19.50 9 Stroke 14.50 23.50 Steel body shock will accept coilover sleeve Factory Rebuildabe Includes travel indicator These shocks can be mounted upside down Ends sold separate Aluminum Smooth Body Shock Comp Ext 7 Stroke 12.50 19.50 9 Stroke 14.50 23.50 Comp/Reb 7 Stroke 9 Stroke Price 3 Valve 606-A730B 606-A930B 144.99 3-5 Valve 606-A735B 606-A935B 144.99 3-6 Valve 606-A736B 606-A936B 144.99 3-8 Valve ********* 606-A938B 144.99 4 Valve 606-A740B 606-A940B 144.99 4-2 Valve 606-A742B ********* 144.99 4-6 Valve 606-A746B 606-A946B 144.99 4-7 Valve ********* 606-A947B 144.99 5 Valve 606-A750B 606-A950B 144.99 5-1 Valve 606-A751B ********* 144.99 5-2 Valve 606-A752B ********* 144.99 5-3 Valve 606-A753B 606-A953B 144.99 5-4 Valve 606-A754B 606-A954B 144.99 5-6 Valve 606-A756B 606-A956B 144.99 5-7 Valve 606-A757B 606-A957B 144.99 6 Valve 606-A760B 606-A960B 144.99 6-3 Valve 606-A763B 606-A963B 144.99 6-4 Valve 606-A764B 606-A964B 144.99 7 Valve 606-A770B 606-A970B 144.99 8 Valve 606-A780B 606-A980B 144.99 9-1 Valve 606-A791B ********* 144.99 76 Call 800-255-4117 or 262-783-7474 for Current Pricing! Fax us 24hr at 262-783-6293

Fits Pro WB and TA Series shocks Accepts 2-1/2 ID springs Kit with 5 sleeve 586-100-24-605BK 47.99 Kit with 7 sleeve 586-100-24-605-7BK 52.49 Shock ends fit TA, AC and A Series Pro Shocks Aluminum end pictured Steel End 606-WB200 9.99 Alum End 606-B200 12.99 Made of Micro-Cellular polyurethane Convoluted design for smooth progression Designed and tested for the Car of Tomorrow Available in two heights 2.25 and 3 Available in (3) durometers Shims.100 thick Cup for C/O and non shocks Fits Pro AC Series shocks Accepts 2-1/2 ID springs Shim.100 Non-Coilover Cup Coilover Cup Bump Stop Description 2.25 Tall 3.00 Tall Price Soft - Red 586-310-3018-27 586-310-3019-41 18.99 Medium -White 586-310-3018-33 586-310-3019-50 18.99 Hard - Black 586-310-3018-39 586-310-3019-59 18.99 Coilover Bumper Cup (works for most shocks) 586-310-30198 15.99 Non-Coilover (Integra) Bumper Cup 586-310-30199 35.95 Plastic bumper shim.100 586-310-30196 2.25 Three densities available and distinguishable by color Mirco-Cell foam construction Ribbed (convoluted) wall for progressive rate Length can be cut to fit your needs Soft - Red 174-BR-28 20.85 Medium - Yellow 174-BR-32 20.85 Hard - Black 174-BR-38 20.85 X-Hard - Blue 174-BR-47 20.85 Shock ends fit TA, AC and A Series Pro Shocks A great choice for racing or hot rod use These ends can convert a bearing end shock to a stock mount shock Ends accept 9/16-18 threaded shafts 606-S500 606-S506 606-S512/14 Rubber bushing eye with 1/2 sleeve 606-S500 6.79 Studded mount with rubber bushing 606-S506 6.79 Rubber eye with flat bar (GM Front) 606-C512 9.00 Rubber eye with flat bar (GM Rear) 606-S514 9.00 Installs at bottom of 2-1/2 coil spring and allows easier adjustment of your ride height. Includes 2 bearings & 4 washers Shock mount adapter 606-C320 35.99 774-20144 44.99 014-10240 8.99 Bump Stop is designed for front or left rear of an Asphalt Late Model running a Big Bar-Soft Spring set-up Bump engagement can be tuned by adjusting upper bushing plate Travel can be measured with the use of the built-in travel indicator Travel can be adjusted with the use of harder or softer poly bushings Stops a car from bottoming out Helps a car turn in the middle of a corner Easy to install and to adjust Comes standard with two yellow bushings 1.5 of adjustment is available Bump Stop Assembly 695-6000 132.55 Soft - Green (50) 695-4563-G 14.49 Standard - Yellow (75) 695-4563-Y 14.49 Medium - Blue (80) 695-4563-B 14.49 Hard - Red (87) 695-4563-R 14.49 Replacement Rod End 774-CM8 5.99 Convoluted bump rubbers fit on your shocks to prevent them from bottoming out and getting damaged on a rough track. They re cheap insurance for expensive shocks Only standard bumpers include cone Bumper Standard End Price Standard w/come 014-20174 22.99 Blue (Standard) 014-20174-1 16.99 Yellow Medium 014-20174-2 19.99 Black Hard 014-20174-3 19.99 Alum Cone Only 014-20173 10.99 Visit us at 5170 N 125th St. Butler WI 53007 or online at www.behlingracing.com 77 Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks

Shocks Coil Sp ri ngs Le a f S pr in gs S h o ck s Co il Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Fits 42 series Integra, 10 &14 series Afco and 50 series QA1 shocks Available for other shocks Accepts 5 coil spring Anodized Black Made in the USA Kit for 5 Spring 586-310-30525 98.95 5 Seat only 586-310-30525C 29.95 5 Adjuster Nut only 586-310-30525N 29.95 Sleeve only 586-310-30525S 23.95 Retainer Plate and Screws 586-310-30525CP 7.75 Adapts 2-1/2 spring plate for 5 spring Made of aluminum No need to buy complete kit Uses existing hardware Saves money! Sold individually 338-30203 19.00 Universal coilover adjuster wrench works with most manufacturer s shocks 606-Z902 7.49 Universal coilover adjuster wrench works with most manufacturer s shocks Swivels to easily adjust nut JOES Shock Workstation lets you hold on to your shock body and the shaft at the same time, making it a lot faster, easier and cleaner to work on your shocks. Just put the JOES Workstation in a vise and you re ready to go or mount it securely to a workbench or pit cart with our base (Sold Separately #19250). Shock Workstation 376-19200 179.99 Workstation Base 376-19250 39.95 Coilover kit comes with 7 sleeve Available for other shocks Anodized black Made in USA Description Billstein Koni Price Complete Kit 586-100-24-612-7BK 586-100-24-611-7BK 52.49 Coilover Top 586-100-24-612-T 586-100-24-611-T 21.99 Adjuster Nut 586-100-24-612-N 586-100-24-611-N 14.95 7 Sleeve 586-100-24-612-7S 586-100-24-611-7S 19.99 Snap Ring 586-100-24-612-SR 586-100-24-611-SR 1.25 Used to keep spring in place when suspension travel unloads main spring Used on left front of dirt late model and right rear of modified Nylon slider and spring sold separate Spring has a low rate of 5# Take-Up-Spring 586-310-3006-005 40.00 Nylon Slider 586-310-30400 17.00 Universal coilover adjuster wrench works with most manufacturer s shocks 490-62030 24.99 014-20110 27.99 376-19075 64.99 Shock Workstation Base (NOT included) Swivels to easily adjust nut Replaceable 4130 steel pins. Back tappered pins keep you from slipping out of the holes. Includes hex for shim stack. 376-19085 49.95 Swivels 360 586-31030310-SG 82.50 Replaceable 4130 steel pin. Includes Both hex sizes for large and small nut in you Penske Shock. Replaceable 4130 steel pins. Available for both small and large body shocks. Large Body 376-19078 49.95 Small Body 376-19079 49.95 Designed to fit shocks 1-1/2 to 2-1/8 with a specially sized rubber seals that conforms easily throughout the range. 376-19300 48.99 78 Call 800-255-4117 or 262-783-7474 for Current Pricing! Fax us 24hr at 262-783-6293

Aluminum clamp Holds canisters 1-1/2-3 Available in 3 tubing sizes Works with almost every shock Durable padding keeps canister held tight Quick release nylon strap 1-1/4 Tube 376-19410 64.99 1-1/2 Tube 376-19412 64.99 1-3/4 Tube 376-19414 64.99 Quick, easy, neat mounting Thicker - only 1 bracket needed Prevents reservoir distortion Lightweight billet aluminum 1-3/4 Tube 426-22764 34.99 Shock mounts are universal mounts and are used in a variety of applications Made of Steel and includes hardware as shown Made in the USA 1/2 Through bolt (Includes bolt, spacer & nut) Through Bolt Style Description Through Bolt Price Spud Style Price 1-1/4 Tube 826-35-3321 13.49 826-35-3327 10.99 1-1/2 Tube 826-35-3322 13.49 826-35-3324 10.99 1-3/4 Tube 826-35-3323 13.49 826-35-3326 10.99 Includes hardware as shown Made of Steel Made in the USA Quick Release cam lever 1/2-13 spud Spud Style Includes hardware as shown Made of Steel Made in the USA With its full 360 turning radius, the Swivel Banjo Canister Clamp gives you the flexibility to mount your shock to match your specific needs Just lift the lever on the clamp to release the grip on the canister, making it easy to remove 1-1/4 Tube 586-310-30603 59.99 1-1/2 Tube 586-310-30604 59.99 1-3/4 Tube 586-310-30605 59.99 Clamps to 3 axle tube Mount coilover Available in 5 or 7 extension Made of steel 5 long bracket 826-35-3340 49.05 7 long bracket 826-35-3350 49.05 826-35-3325 5.25 826-35-3310 5.25 826-35-3120 5.25 Bolt 1/2-13 x 2-1/4 826-990-5013-225 0.69 Bolt 1/2-13 x 2-3/4 826-990-5013-275 0.79 Flange Nut 1/2-13 230-NAS5 0.65 Spacer 1/4 Long 826-999-5507-025 1.40 Spacer 1/2 Long 826-999-5507-050 1.40 Spacer 1/2 Long 826-999-5507-075 1.40 Rotates 360 Shock mounts are universal mounts and are used in a variety of applications Made of Steel and includes hardware as shown Painted Black Extension Clamps to 1-3/4 tube Made in the USA 1/2-13 Through bolt 2 Extension 418-001-5 17.00 3 Extension 418-001-6 18.00 Includes hardware as shown Made of Steel Made in the USA Replaces bolt and spacer Won t need to fumble for spacer at the track Made in the USA Offset is from center of bolt to tube (Not center) 1-3/4 Tube Offset Part Number Price 2 826-35-3140 7.75 3 418-001-390-3 10.49 4 418-001-390-4 10.99 Uses a hair pin for fast removal Non wrenches need to change shocks Replaces bolt and spacer Saves time Includes pin Short Pin 860-WM148SS 6.99 Long Pin 860-WM148SL 6.99 586-310-30500 7.50 Visit us at 5170 N 125th St. Butler WI 53007 or online at www.behlingracing.com 79 Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks

Shocks Coil Sp ri ngs Le a f S pr in gs S h o ck s Co il Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks 2-5/8 ID Coil Spring Ultra lightweight Tightest tolerances Most precise rates Consistent performance Lifetime warranty (2% of free height) Rate 10 Tall 12 Tall 14 Tall Price 80# ***N/A*** 014-22080 ***N/A*** 54.99 100# 014-23100 014-22100 014-24100 54.99 110# ***N/A*** 014-22110 014-24110 54.99 125# 014-23125 014-22125 014-24125 54.99 150# 014-23150 014-22150 014-24150 54.99 175# 014-23175 014-22175 014-24175 54.99 200# 014-23200 014-22200 014-24200 54.99 225# 014-23225 014-22225 014-24225 54.99 250# 014-23250 014-22250 014-24250 54.99 275# 014-23275 014-22275 014-24275 54.99 300# 014-23300 014-22300 014-24300 54.99 325# 014-23325 014-22325 014-24325 54.99 350# 014-23350 014-22350 014-24350 54.99 375# 014-23375 014-22375 ***N/A*** 54.99 400# 014-23400 014-22400 ***N/A*** 54.99 425# 014-23425 014-22425 ***N/A*** 54.99 450# 014-23450 014-22450 ***N/A*** 54.99 475# 014-23475 014-22475 ***N/A*** 54.99 500# 014-23500 014-22500 ***N/A*** 54.99 525# 014-23525 014-22525 ***N/A*** 54.99 550# 014-23550 014-22550 ***N/A*** 54.99 575# 014-23575 ***N/A*** ***N/A*** 54.99 600# 014-23600 014-22600 ***N/A*** 54.99 650# 014-23650 014-22650 ***N/A*** 54.99 5-1/2 x 12 Coil Spring Pigtail spring one end ground flat on other Designed for stock GM rear suspensions Lifetime warranty Painted black 5 x 11 Coil Spring Black finish Made for racing Most precise rates Consistent performance Lifetime warranty Rate Part Number Price 150# 014-25150SS 47.99 175# 014-25175SS 47.99 200# 014-25200SS 47.99 225# 014-25225SS 47.99 250# 014-25250SS 47.99 275# 014-25275SS 47.99 300# 014-25300SS 47.99 Rate Part Number Price 800# 014-20800-6 47.99 900# 014-20900-6 47.99 1000# 014-21000-6 51.99 1100# 014-21100-6 51.99 1200# 014-21200-6 51.99 1300# 014-21300-6 51.99 1400# 014-21400-6 51.99 5 x 9-1/2 64-72 Chevelle & Monte Carlo, 67-69 Camaro and 68-74 Nova 5 Or 5-1/2 x 9-1/2 Springs 5-1/2 x 9-1/2 Ground flat on one end Most Fords, 73 - Up Chevelle &M/C, 70-Up Camaro 74-Up Nova Tightest tolerances Most precise rates Consistent performance Lifetime warranty (2% of free height) Rate 5 x 9-1/2 5-1/2 x 9-1/2 Price 500# 014-20500 014-20500-1 47.99 550# 014-20550 014-20550-1 47.99 600# 014-20600 014-20600-1 47.99 650# 014-20650 014-20650-1 47.99 700# 014-20700 014-20700-1 47.99 750# 014-20750 014-20750-1 47.99 800# 014-20800 014-20800-1 47.99 850# 014-20850 014-20850-1 47.99 900# 014-20900 014-20900-1 47.99 950# 014-20950 014-20950-1 47.99 1000# 014-21000 014-21000-1 51.99 1050# 014-21050 014-21050-1 51.99 1100# 014-21100 014-21100-1 51.99 1150# 014-21150 014-21050-1 51.99 1200# ***N/A*** 014-21200-1 51.99 1300# ***N/A*** 014-21300-1 51.99 1350# 014-21350 ***N/A*** 63.99 1400# ***N/A*** 014-21400-1 57.99 5 Rear Coil Spring Ground flat on both ends Ultra lightweight Tightest tolerances Most precise rates Consistent performance Lifetime warranty (2% of free height) Rate 5 x 11 5 x 13 Price 100# 014-25100 ***N/A*** 47.99 125# 014-25125 014-25125-1 47.99 150# 014-25150 014-25150-1 47.99 175# 014-25175 014-25175-1 47.99 200# 014-25200 014-25200-1 47.99 225# 014-25225 014-25225-1 47.99 250# 014-25250 014-25250-1 47.99 275# 014-25275 014-25275-1 47.99 300# 014-25300 014-25300-1 47.99 325# 014-25325 014-25325-1 51.99 350# 014-25350 014-25350-1 51.99 375# 014-25375 014-25375-1 51.99 400# 014-25400 014-25400-1 51.99 80 Call 800-255-4117 or 262-783-7474 for Current Pricing! Fax us 24hr at 262-783-6293

5 x 6-5/8 Springs Designed for Torque Link Ground flat on both ends Tightest tolerances Consistent performance Lifetime warranty (2% of free height) A MUST HAVE!! Minimal, if any bowing or buckling More deflection and higher solid loads than any competitor Straight deflection and larger body bulge eliminates any shock body interference. Total deflection increased 0.500 to 0.700 Total deflection is usable deflection. Designed to stress levels that permit banging to solid countless times without taking any set. Exceptional accuracy of rate and linearity of rate through 80% of deflection. Rate 12 Tall Ultra-Clearance 14 Tall Ultra-Clearance Price 110# 346-12B0110UHT ***N/A*** 65.99 125# 346-12B0125UHT 346-14B0125UHT 65.99 150# 346-12B0150UHT 346-14B0150UHT 65.99 175# 346-12B0175UHT 346-14B0175UHT 65.99 185# 346-12B0185UHT 346-14B0185UHT 65.99 200# 346-12B0200UHT 346-14B0200UHT 65.99 225# 346-12B0225UHT 346-14B0225UHT 65.99 250# 346-12B0250UHT 346-14B0250UHT 65.99 275# 346-12B0275UHT ***N/A*** 65.99 1-7/8 ID 10 Tall Ground flat on both ends More rates available Consistent performance Lifetime warranty Rate Part Number Price 600# 014-270600 47.99 700# 014-270700 47.99 800# 014-270800 47.99 900# 014-270900 47.99 1050# 014-271050 47.99 1200# 014-271200 47.99 Progressive 014-270000PR 59.99 Rate 10 Tall 1-7/8 ID Price 125# 346-1810D0125 67.99 150# 346-1810D0150 67.99 175# 346-1810D0175 67.99 185# 346-1810D0185 67.99 200# 346-1810D0200 67.99 225# 346-1810D0225 67.99 250# 346-1810D0250 67.99 275# 346-1810D0275 67.99 5 Rear Coil Spring Ground flat on both ends Lightest conventional available Springs are pounds lighter then competition Rate 5 x 11 5 x 13 Price 125# 346-18SN125 346-18S125 48.99 150# 346-18SN150 346-18S150 48.99 175# 346-18SN175 346-18S175 48.99 185# ***N/A*** 346-18S185 48.99 200# 346-18SN200 346-18S200 48.99 225# 346-18SN225 346-18S225 48.99 250# 346-18SN250 346-18S250 48.99 275# 346-18SN275 346-18S275 48.99 300# 346-18SN300 346-18S300 48.99 Rate 10 Tall 12 Tall 14 Tall Price 100# ***N/A*** ***N/A*** 346-1814B0100 58.99 110# ***N/A*** 346-1812B0110 ***N/A*** 58.99 125# 346-1810B0125 346-1812B0125 346-1814B0125 58.99 150# 346-1810B0150 346-1812B0150 346-1814B0150 58.99 175# 346-1810B0175 346-1812B0175 346-1814B0175 58.99 185# 346-1810B0185 346-1812B0185 346-1814B0185 58.99 200# 346-1810B0200 346-1812B0200 346-1814B0200 58.99 225# 346-1810B0225 346-1812B0225 346-1814B0225 58.99 250# 346-1810B0250 346-1812B0250 346-1814B0250 58.99 275# 346-1810B0275 346-1812B0275 346-1814B0275 58.99 300# 346-1810B0300 346-1812B0300 346-1814B0300 58.99 325# 346-1810B0325 346-1812B0325 346-1814B0325 58.99 350# 346-1810B0350 346-1812B0350 346-1814B0350 58.99 375# 346-1810B0375 346-1812B0375 346-1814B0375 58.99 400# 346-1810B0400 346-1812B0400 346-1814B0400 58.99 425# 346-1810B0425 346-1812B0425 ***N/A*** 58.99 450# 346-1810B0450 346-1812B0450 ***N/A*** 58.99 475# 346-1810B0475 346-1812B0475 ***N/A*** 58.99 500# 346-1810B0500 346-1812B0500 ***N/A*** 58.99 525# 346-1810B0525 346-1812B0525 ***N/A*** 58.99 550# 346-1810B0550 346-1812B0550 ***N/A*** 58.99 575# 346-1810B0575 346-1812B0575 ***N/A*** 58.99 600# 346-1810B0600 346-1812B0600 ***N/A*** 58.99 5 x 9-1/2 64-72 Chevelle & Monte Carlo, 67-69 Camaro and 68-74 Nova 5 Or 5-1/2 x 9-1/2 Springs 5-1/2 x 9-1/2 Ground flat on one end Most Fords, 73 - Up Chevelle &M/C, 70-Up Camaro 74-Up Nova Lightest conventional available Springs are pounds lighter then competition Consistent performance All springs made of new high strength steel alloys Rate 5 x 9-1/2 5-1/2 x 9-1/2 Price 550# 346-18Y0550 346-18Z0550 48.99 600# 346-18Y0600 346-18Z0600 48.99 650# 346-18Y0650 346-18Z0650 48.99 700# 346-18Y0700 346-18Z0700 48.99 750# 346-18Y0750 346-18Z0750 48.99 800# 346-18Y0800 346-18Z0800 48.99 850# 346-18Y0850 346-18Z0850 48.99 900# 346-18Y0900 346-18Z0900 48.99 950# 346-18Y0950 346-18Z0950 48.99 1000# 346-18Y1000 346-18Z1000 48.99 1050# 346-18Y1050 346-18Z1050 48.99 1100# 346-18Y1100 346-18Z1100 48.99 1150# 346-18Y1150 ***N/A*** 48.99 1200# ***N/A*** 346-18Z1200 48.99 Visit us at 5170 N 125th St. Butler WI 53007 or online at www.behlingracing.com 81 Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks

Shocks Coil Sp ri ngs Le a f S pr in gs S h o ck s Co il Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Engineered for up to 30% more spring travel Extra spring travel gives you more consistent linear rate VMX high tensile alloy not found in other racing springs 2-5/8 ID springs Up to 30% lighter More stroke means less chance of coil bind Guaranteed to stay within 1% of square and 2% of free height Black powder coated Rate etched into end of spring Rate 10 Tall 12 Tall 14 Tall Price 100# ***N/A*** ***N/A*** 586-310-2514-100MX 75.00 125# ***N/A*** ***N/A*** 586-310-2514-125MX 75.00 150# ***N/A*** 586-310-2512-150MX 586-310-2514-150MX 75.00 175# ***N/A*** 586-310-2512-175MX 586-310-2514-175MX 75.00 185# ***N/A*** 586-310-2512-185MX 586-310-2514-185MX 75.00 200# ***N/A*** 586-310-2512-200MX 586-310-2514-200MX 75.00 225# ***N/A*** 586-310-2512-225MX 586-310-2514-225MX 75.00 250# ***N/A*** 586-310-2512-250MX 586-310-2514-250MX 75.00 275# 586-310-2510-275MX 586-310-2512-275MX 586-310-2514-275MX 75.00 300# 586-310-2510-300MX 586-310-2512-300MX ***N/A*** 75.00 325# 586-310-2510-325MX 586-310-2512-325MX ***N/A*** 75.00 350# 586-310-2510-350MX 586-310-2512-350MX ***N/A*** 75.00 375# 586-310-2510-375MX 586-310-2512-375MX ***N/A*** 75.00 400# 586-310-2510-400MX 586-310-2512-400MX ***N/A*** 75.00 425# 586-310-2510-425MX 586-310-2512-425MX ***N/A*** 75.00 450# 586-310-2510-450MX 586-310-2512-450MX ***N/A*** 75.00 475# 586-310-2510-475MX ***N/A*** ***N/A*** 75.00 500# 586-310-2510-500MX ***N/A*** ***N/A*** 75.00 525# 586-310-2510-525MX ***N/A*** ***N/A*** 75.00 550# 586-310-2510-550MX ***N/A*** ***N/A*** 75.00 575# 586-310-2510-575MX ***N/A*** ***N/A*** 75.00 600# 586-310-2510-600MX ***N/A*** ***N/A*** 75.00 5 x 11 or 13 tall Springs Ground flat on both ends Guaranteed to stay within 1% of square and 2% of free height Black powder coated Rate etched into end of spring Rate 5 x 11 5 x 13 Price 125# 586-310-5011-125 586-310-5013-125 56.50 150# 586-310-5011-150 586-310-5013-150 56.50 175# 586-310-5011-175 586-310-5013-175 56.50 200# 586-310-5011-200 586-310-5013-200 56.50 225# 586-310-5011-225 586-310-5013-225 56.50 250# 586-310-5011-250 586-310-5013-250 56.50 275# 586-310-5011-275 586-310-5013-275 56.50 300# 586-310-5011-300 586-310-5013-300 61.00 325# 586-310-5011-325 586-310-5013-325 61.00 350# 586-310-5011-350 586-310-5013-350 61.00 375# ***N/A*** 586-310-5013-375 61.00 Conventional double grooved urethane spring rubbers Features molded in handle for fast and easy removal Made from K-Prene Urethane Yellow - Soft 586-310-30102 38.95 Orange - Med 586-310-30103 38.95 Red - Hard 586-310-30104 38.95 5 Or 5-1/2 x 9-1/2 Springs Ground flat on one end Guaranteed to stay within 1% of square and 2% of free height Black powder coated Rate etched into end of spring 5 x 9-1/2 64-72 Chevelle & Monte Carlo, 67-69 Camaro and 68-74 Nova 5-1/2 x 9-1/2 Most Fords, 73 - Up Chevelle &M/C, 70-Up Camaro 74-Up Nova Rate 5 x 9-1/2 5-1/2 x 9-1/2 Price 400# 586-310-5095-400 586-310-5595-400 56.50 450# 586-310-5095-450 586-310-5595-450 56.50 500# 586-310-5095-500 586-310-5595-500 56.50 550# 586-310-5095-550 586-310-5595-550 56.50 600# 586-310-5095-600 586-310-5595-600 56.50 650# 586-310-5095-650 586-310-5595-650 56.50 700# 586-310-5095-700 586-310-5595-700 56.50 750# 586-310-5095-750 586-310-5595-750 56.50 800# 586-310-5095-800 586-310-5595-800 56.50 850# 586-310-5095-850 586-310-5595-850 56.50 900# 586-310-5095-900 586-310-5595-900 56.50 950# 586-310-5095-950 586-310-5595-950 56.50 1000# 586-310-5095-1000 586-310-5595-1000 61.75 1100# 586-310-5095-1100 586-310-5595-1100 61.75 1200# ***N/A*** 586-310-5595-1200 61.75 5 x 16 tall Springs Ground flat on both ends Guaranteed to stay within 1% of square and 2% of free height Black powder coated Rate etched into end of spring Rate Part Number Price 125# 586-310-5016-125 75.00 150# 586-310-5016-150 75.00 175# 586-310-5016-175 75.00 200# 586-310-5016-200 75.00 225# 586-310-5016-225 75.00 250# 586-310-5016-250 75.00 275# 586-310-5016-275 75.00 300# 586-310-5016-300 75.00 Conventional double grooved urethane spring rubbers Features molded in handle for fast and easy removal Comes in 3 different durometers Made from K-Prene Urethane works with 5 and 5-1/2 spring Yellow - Soft 586-310-30112 31.25 Orange - Med 586-310-30113 31.25 Red - Hard 586-310-30114 31.25 82 Call 800-255-4117 or 262-783-7474 for Current Pricing! Fax us 24hr at 262-783-6293

Using H5S.TW and special tempering methods Swift s require fewer coils Swifts H5S.TW allows thinner spring wire and fewer coils to make their springs dramatically lighter Swift springs have over 6 times the durability of the competition Lightest unsprung mass Smoother weight transfer Designed to solve bowing poblems Maximized spring stoke Rate Part Number Price 100# 780-140-250-100B 99.95 125# 780-140-250-125B 99.95 150# 780-140-250-150B 99.95 175# 780-140-250-175B 99.95 185# 780-140-250-185B 99.95 200# 780-140-250-200B 99.95 225# 780-140-250-225B 99.95 250# 780-140-250-250B 99.95 275# 780-140-250-275B 99.95 300# 780-140-250-300B 99.95 Conventional double grooved urethane spring rubbers Features molded in handle for fast and easy removal Made from K-Prene Urethane Yellow - Soft 586-310-30102 38.95 Orange - Med 586-310-30103 38.95 Red - Hard 586-310-30104 38.95 Available in single or double groove works with 5 and 5-1/2 spring Single Groove 586-310-30100 13.99 Double Groove 586-310-30101 13.99 0-3000 lbs. by 1 lb. Travel to.001 6 to 20 tall springs Coil and coil-over springs, square end and pigtail Available in metric Includes easy-to-use digital indicator to measure the spring s travel and a digital load readout Important Note: You MUST preload the spring to a minimum of 1/2. Manufacturers rate springs with a higher preload. The higher the preload, the higher the spring rate because the end coils start to touch, effectively shortening the spring. Without adequate preload, readings may be inconsistant. Coil springs - even the best quality - can vary as much as 5% from the stated rate. This is normal manufacturing tolerance. 426-73505 935.99 Conventional double grooved urethane spring rubbers Features molded in handle for fast and easy removal 3 different durometers available Made from K-Prene Urethane Works with 2-1/2 and 2-5/8 spring Yellow - Soft 586-310-30112 31.25 Orange - Med 586-310-30113 31.25 Red - Hard 586-310-30114 31.25 Fine tune your spring rate for the perfect setup Make quick adjustments during practice or on pit stops For coilover springs 2-1/2 and 2-5/8 ID Clear - 10 - Extra Soft 426-61010 36.99 Orange - 15 - Soft 426-61015 36.99 Red - 40 - Medium 426-61040 36.99 Blue - 50 - Hard 426-61050 36.99 Black - 70 - Extra Hard 426-61070 36.99 New Longacre Large Spacing Spring Rubbers for your big bar soft spring set-up. Designed for the big gap in large travel springs Fine tune your spring rate for the perfect setup Make quick adjustments during practice or on pit stops Used by virtually all Sprint Cup teams in every race For coilover springs 2-1/2 and 2-5/8 ID Orange - 15 - Soft 426-61016 35.99 Red - 40 - Medium 426-61041 35.99 Blue - 50 Hard 426-61051 35.99 Spacers raise hide heigh up without increasing rate Spacers are machined to be lightweight Made of aluminum Made in the USA 1 Spacer 170-ST-409-1 17.99 2 Spacer 170-ST-409-2 19.99 3 Spacer 170-ST-409-3 25.99 586-100-305 21.25 586-100-306 41.95 Visit us at 5170 N 125th St. Butler WI 53007 or online at www.behlingracing.com 83 Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks

Shocks Coil Sp ri ngs Le a f S pr in gs S h o ck s Co il Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Comes with alum weight jack plate Available with steel or aluminum bolt Bolt is 1-1/8 SAE fine thread Comes with 6 or 8 long bolt Works with 5 and 5-1/2 Springs Description 5 Spring Price 6 Aluminum Bolt kit 014-20197 49.99 8 Aluminum Bolt kit 014-20197-8 49.99 Replacement parts for afco weight jack Bolt is 1-1/8 SAE fine thread 6 or 8 long bolt available Bolt & plate available in alum & steel Works with 5 and 5-1/2 Springs Bolts work with spring bucket 826-35-1001 Description 5 Spring Price 5-1/2 Spring Price Alum plate 014-20197R 22.99 014-20197R 22.99 Steel plate 014-20199R 22.99 014-20198R 22.99 6 Alum Bolt 014-20201-6 16.99 014-20201-6 16.99 8 Alum Bolt 014-20201-8 16.99 014-20201-8 16.99 6 Steel Bolt 014-20201-6S 16.99 014-20201-6S 16.99 8 Steel Bolt 014-20201-8S 16.99 014-20201-8S 16.99 Nut with zerk 014-20202 9.99 014-20202 9.99 Get the needed edge with the Swiveler! The spring cup pivots on the bolt virtually eliminating bind during travel! Swivler relieves coil bind Durable steel construction Cup is rebuildable Bolt is 1 course thread 1-1/8 SAE fine available by request Kits are sold with 1 course bolt 4, 6 or 8 long bolt available Different threads available Works with 5 and 5-1/2 Springs Description 5 Spring Price Assembly 4 Bolt 695-3030-C4 39.88 Assembly 6 Bolt 695-3030-C6 39.88 Assembly 8 Bolt 695-3030-C8 39.88 Swivler Cup 695-3030 33.88 4 jack bolt only 1 cr 695-3022 8.93 6 jack bolt only 1 cr 695-3023 9.99 8 jack bolt only 1 cr 695-3024 9.63 Comes with steel weight jack plate Available with steel or aluminum bolt Bolt is 1-1/8 SAE fine thread Comes with 6 or 8 long bolt Available for 5 and 5-1/2 Springs Description 5 Spring Price 5-1/2 Spring Price 6 Steel Bolt kit 014-20199-6S 38.99 014-20198-6S 41.99 8 Steel Bolt kit 014-20199-8S 38.99 014-20198-8S 41.99 6 Alum Bolt kit 014-20199-6 38.99 014-20198-6 41.99 8 Alum Bolt kit 014-20199-8 38.99 014-20198-8 41.99 Works with 5 and 5-1/2 Springs Uses 1-1/8 SAE fine bolts 826-35-1001 33.50 For 5 and 5-1/2 springs Made of steel 1 Course thread 1 course thread 418-001-301 5.99 1/2 Square drive (1/2 ratchet) Made of steel 1 course thread Solid 8 Bolt 338-300 12.99 11 Bolt 338-3003 12.99 Works with 5 and 5-1/2 Springs Universal lower coil spring plate welds to axle tube 418-109-303 9.00 Works with 5 and 5-1/2 Springs Painted black 418-001-304 7.99 1/2 Square drive (1/2 ratchet) Made of steel 1 course thread Gundrilled 8 Bolt 826-35-1102 14.99 11 Bolt 826-35-1104 15.99 230-NAJO 1.40 014-20202 9.99 84 Call 800-255-4117 or 262-783-7474 for Current Pricing! Fax us 24hr at 262-783-6293

Outlaw bearing allows for less maintenance and higher load rating. The Outlaw bearing uses aircraft technologies to produce the smoothest bearing on the market. The Outlaw bearing can run 20x more side load than the standard liner bearing and has 5 times the life of a standard bearing Bearing style slider Double lip dirt seal 5/8 hardened shaft and chrome plated Pin release lock nut Slotted top plate for fast spring change Floating lower plate 2 high spring retainers Totally sealed tube for less maintenance 2 Extended shaft available Outlaw Slider Compressed Extended Standard 16.20 24.40 2 Extended 17.60 25.80 Description 5 Spring Price Outlaw assembly std shaft 100-7500 150.00 Outlaw assy with 2 longer shaft 100-7500-2 154.00 Outlaw Rebuild Kit std shaft 100-7518 49.50 Outlaw Rebuild Kit 2 longer 100-7518-2 53.50 100-7502 25.99 Made for adjusting slider wrench Steel wrench 100-7510 11.99 100-7503 25.99 Locking pin for adjuster nut 100-7516 1.99 Rate 5 x 11 5 x 13 Price 125# 346-18SN125 346-18S125 48.99 150# 346-18SN150 346-18S150 48.99 175# 346-18SN175 346-18S175 48.99 185# ***N/A*** 346-18S185 48.99 200# 346-18SN200 346-18S200 48.99 225# 346-18SN225 346-18S225 48.99 250# 346-18SN250 346-18S250 48.99 275# 346-18SN275 346-18S275 48.99 300# 346-18SN300 346-18S300 48.99 The outlaw slider is great but the XD slider may be the last one you ever buy. BSB designed the XD series for the racer that wants to spend less time on his race car parts and more time on his race setup. BSB added an invert bearing surface to the face of the plunger to give it super stability at full extension Bearing style slider AN wiper Double lip seal 5/8 hardened shaft and chrome plated Quick release pin Slotted top plate for fast spring change Floating lower plate 2 high spring retainers Totally sealed tube for less maintenance 2 Extended shaft available XD Slider Compressed Extended Standard 15.70 24.70 2 Extended 17.10 26.10 XD assembly std shaft 100-7540 175.99 XD assy with 2 longer shaft 100-7540-2 175.99 11 to 16 long Works with 5 ID springs Pull pin design for easy spring adjustment 26 Extended and 16 collapsed Complete with 1/2 rod ends Lightweight and durable steel construction 851-CSS 150.00 Rate Part Number Price 125# 586-310-5011-125 56.50 150# 586-310-5011-150 56.50 175# 586-310-5011-175 56.50 200# 586-310-5011-200 56.50 225# 586-310-5011-225 56.50 250# 586-310-5011-250 56.50 275# 586-310-5011-275 56.50 300# 586-310-5011-300 56.50 Visit us at 5170 N 125th St. Butler WI 53007 or online at www.behlingracing.com 85 Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks

Shocks Coil Sp ri ngs Le a f S pr in gs S h o ck s Co il Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Highest quality racing springs Chrysler or Camaro type High strength Chrome Vandium Hard plastic rub blocks Available with and without bushing Great for Modifieds Description Arch Rate Part Number Price Chrysler 5-5/8 102 014-20230L 128.99 Chrysler 5-5/8 142 014-20230 140.99 Chrysler 6-5/8 102 014-20231L 128.99 Chrysler 6-5/8 122 014-20231M 128.99 Chrysler 6-5/8 142 014-20231 140.99 Chrysler 6-5/8 155 014-20231MHD 140.99 Chrysler 6-5/8 166 014-20231HD 150.99 Chrysler 6-5/8 194 014-20231XHD 150.99 Camaro 6-3/8 153 014-20228LW 140.99 Camaro 6-3/8 176 014-20228 140.99 Camaro 6-3/8 205 014-20228HD 150.99 Highest quality racing springs Chrysler type leaf spring High strength multi leaf Hard plastic rub blocks Great for Modifieds Description Arch Rate Part Number Price Chrysler 6-1/4 105 338-L21 165.99 Chrysler 5-1/4 120 338-L30 165.99 Chrysler 6-1/4 120 338-L31 165.99 Chrysler 5-1/4 150 338-L40 165.99 Chrysler 6-1/4 150 338-L41 165.99 014-20232 12.99 3-1/2 W x 6-5/16 L x 2-9/16 T Width of flange is 4-1/2 Mounting holes on width are 1-13/16 C-C Mounting holes on length are 3 and 5-1/16 Slider assembly 014-20236S 74.99 Replacement bearing 014-20236S-2 9.99 014-20232-1 55.99 Highest quality racing springs Shot peened and stress relieved High strength Chrome Vandium Hard plastic rub blocks Available with and without bushing Great for Modifieds Light weight Mono-leaf Description Arch Rate Part Number Price 5 x.291 4-1/4 47 014-20242 65.99 5 x.262 4-1/4 34 014-20242LW 64.99 Highest quality racing springs High strength mono leaf Hard plastic rub blocks Great for Modifieds Arch Rate Part Number Price 5-1/4 35 338-L21M 59.99 5-1/4 45 338-L50M 63.99 RH mount 014-20249 25.99 LH mount 014-20250 25.99 8 U-bolt 014-20238 5.99 9 U-bolt 014-20238-9 6.99 3 mounting position 014-20250B 64.99 014-50200 17.99 86 Call 800-255-4117 or 262-783-7474 for Current Pricing! Fax us 24hr at 262-783-6293

Aluminum lowering blocks Available in a variety of heights Stackable to obtain correct height Height Part Number Price 1/2 Block 014-20244 7.99 3/4 Block 014-20245 8.99 1 Block 014-20246 8.99 1-1/2 Block 014-20247 9.99 2 Block 014-20248 10.99 3 Block 014-20243 12.99 Chrysler Style Assembly 014-20236 24.99 End bushing 338-L410 3.00 Center bushing 338-L411 3.00 Made in the USA 46 C-C mounting end 32 straight tube before the bends Right side has mounting hole Left side is turned up Universal fit sway bar Most popular sway bar on the market Striped with a color code to easily identify the nominal rate of bar Available in 7 different rates 32 46 C-C Eliminates the need for rubber bushings in Chrysler rear spring eye. Prevents binding and eases leaf spring maintenance Assembly 014-20235 12.99 Bolt only 014-20235-3 17.99 Alum bushing 014-20235-4 9.99 Diameter Rate Color Part Number Price 1 150# Blue 138-F-354-100 129.99 1 1/16 175# Green 138-F-354-106 138.99 1 1/8 200# Yellow 138-F-354-112 139.99 1 1/4 300# Red 138-F-354-125 142.99 1 3/8 400# Brown 138-F-354-137 144.99 1 3/8 HD 475# Silver 138-F-354-137HW 179.99 1 3/8 XHD 550# Gold 138-F-354-137XHW 223.99 1 1/2 625# Purple 138-F-354-150HW 226.99 Adjustable lowering blocks allow you to adjust the lead in the rear end. 1-1/2 Tall Block 2-1/2 wide 014-20270 39.99 Replaces rubber bushing Allows front eye to rotate and twist to react to spring movement Promotes more consistent handling Gets rid of bind 014-20229P 54.99 Available in aluminum and steel 2 required per spring 5/16 thick Aluminum 014-20235 12.99 Steel 012-AA160A1 14.95 3 piece design allows eye to rotate Inner steel sleeve protects bushing and mount hardware for longer life Fits Chrysler type spring 014-20229N 34.99 1-1/4 diameter 49 spline 37.5 long Multiple effective diameters and rates available Available in solid and hollow Bar rate is figured with 12-1/2 arm Made in the USA Hollow sway bars are gun drilled All bars are made from solid material Made of aircraft quality steel CNC machined to ensure extreme accuracy 1-1/4-49 spline Bars are polished and heat treated to be free of any imperfections Effective Solid Sway Bar Price Tubular Sway Bar Price 3/4 311-1449SD-75 127.00 13/16 311-1449SD-136 127.00 7/8 135# 311-1449SD-78 127.00 311-1449HW-78 177.00 15/16 311-1449SD-156 150.00 311-1449HW-156 177.00 1 200# 311-1449SD-1 127.00 311-1449HW-1 177.00 1-1/16 225# 311-1449SD-1116 127.00 311-1449HW-1116 177.00 1-1/8 250# 311-1449SD-118 127.00 311-1449HW-118 177.00 1-3/16 300# 311-1449SD-1316 127.00 311-1449HW-1316 177.00 1-1/4 350# 311-1449SD-114 127.00 311-1449HW-114 177.00 1-5/16 400# 311-1449SD-1516 235.00 311-1449HW-1516 290.00 1-3/8 450# 311-1449SD-138 150.00 311-1449HW-138 230.00 1-7/16 500# 311-1449SD-1716 150.00 311-1449HW-1716 230.00 1-1/2 550# 311-1449SD-112 150.00 311-1449HW-112 230.00 Visit us at 5170 N 125th St. Butler WI 53007 or online at www.behlingracing.com 87 Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks

Shocks Coil Sp ri ngs Le a f S pr in gs S h o ck s Co il Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks Coil Springs Leaf Springs Shocks 1-3/4 diameter 48 spline 37.5 long Multiple effective diameters and rates available Available in solid and hollow Bar rate is figured with 12-1/2 arm Made in the USA Hollow sway bars are gun drilled All bars are made from solid material Made of aircraft quality steel 1-1/4-49 spline CNC machined to ensure extreme accuracy Bars are polished and heat treated to be free of any imperfections 1-3/4 bars have less spring rate loss than smaller bars Effective Rate Part Nubmer Price 1-3/8 750# 311-134-HW-138 275.00 1-1/2 800# 311-134-HW-112 290.00 1-5/8 850# 311-134-HW-158 265.00 1-11/16 900# 311-134-HW-11116 265.00 1-3/4 950# 311-134-HW-134 265.00 1-13/16 1000# 311-134-HW-11316 290.00 1-7/8 1075# 311-134-HW-178 290.00 2 1225# 311-134-HW-2 290.00 Solid mount adjuster bolt 7/8-9 thread Made of steel 1-1-1/16 (1-3/8 ID) 138-F-354K1-1 11.08 1-1/8-1-1/4 (1-1/2 ID) 138-F-354K2-1 11.08 1-3/8 (1-3/4 ID) 138-F-354K3-1 12.50 1-1/2 (2 ID) 418-001-23922 15.49 Adjusting the sway bar preload has now become easier. No need to jack up the car. To adjust, use a 3/8 drive wrench on the top and simply turn in or out the preload. A thread drag adjuster prevents it from moving on its own. 7/8-9 thread Up to 1-3/8 bar Complete Assy 338-23997 40.69 Bushing Only 338-23996 11.99 Eye Bolt Only 338-24097 35.99 Threaded shank 338-BOLTONLY 9.99 Detent ball 338-23994.69 Allen Screw 338-23995 1.29 Pivoting Eye Prevents bind 7/8-9 thread 2 ID hole for large sway bar Sold less frame nut 7/8-9 Jam Nut 138-240 1.50 Pivots 360 for easy adjustment Pivots 360 for easy adjustment When Sold pairs broach is timed Made of 4130 chromoly Available for 1-1/4 and 1-3/4 bars Extra long pad C-C from 10-5/8 to 14-13/16 Made in the USA Spline Bend Up Offset Quanity Part Number 1-1/4 49 15 None Pair 311-125-15LP-4130 345.00 1-3/4 48 15 None Pair 311-175-15LP-4130 345.00 Following fits Lefthander 03-07 Wide Fab Stub Spline Bend Up Offset Quanity Part Number 1-1/4 49 15 30 Pair 311-125-15LP-4130-3 360.00 1-3/4 48 15 30 Pair 311-175-15LP-4130-3 360.00 Solid mount adjuster bolt 7/8-9 thread Made of Aluminum Takes the guess work out of the initial preload adjustment Enables quick and precise sway bar preload Eliminates critical spline indexing Spline 1-1/4 Spline Price 1-3/4 Spline Price Complete Arm Assy 695-2700 152.68 695-2727 165.95 Replacement adjuster 695-2700-A 136.45 695-2727-A 138.65 Replacement steer arm 695-2726 36.99 695-2726 36.99 586-100-2816 21.99 Adapts to many chassis. Plastic bushing helps eliminate suspension bind 1-1/4 sway bar 695-9978 12.23 1-1/2 sway bar 695-9979 12.23 1-3/4 sway bar 695-9980 12.23 Simply bolt on to the right side of the frame and you re in business. Adjust the rate by moving ahead and back. Complete Assembly 338-23990 92.99 Frame Mount Only 338-23698 29.39 1 ID 338-23701 12.99 1-1/16 ID 338-23706 12.99 1-1/8 ID 338-23700 9.69 1-1/4 ID 338-23704 9.69 1-3/8 ID 338-23705 9.69 1-1/2 ID 338-23702 11.79 418-001-2399720 52.99 88 Call 800-255-4117 or 262-783-7474 for Current Pricing! Fax us 24hr at 262-783-6293