Industrial Hose & Couplings METALLIC HOSE ASSEMBLIES PRODUCT INDE The improved Stainless Steel Annular Hose from Tubest is now manufactured to the newly introduced European ISO3 Standard. This has been produced to standardise European requirements for design, manufacture and testing of Stainless Steel Hose. The Standard guarantees equivalent mechanical performances of two types (Type 1 and Type 2) of the braided Stainless Steel Hose assemblies, characterised by their respective dynamic bend radii. Hose assemblies manufactured from Tubest hose are guaranteed to give a 0,000 cycle life at the maximum dynamic bend radius assuming that the hose assembly is installed correctly. This cycle life is affected by changes to either the pressure or the radius. Type 1 hose is defined as High Flexibility, Type 2 as Standard Flexibility. Both Parnor and Parrap conform to the requirements of Type 1 hose. Parrap improves on these requirements by %. All the testing of Tubest hose has been carried out under the control of Bureau Veritas file BV.SOS.4.90242/3 to ensure compliance to the Standard. This fact has allowed Tubest to be the only manufacturer able to meet the dynamic requirements for the space station Freedom. The Hose assemblies are manufactured to Quality Control standards in accordance with BS70 pt 2, ISO 9002 and EN29002 (Q09970) as assessed by the British Standards Institute. All assemblies are leak tested (air pressure under water) and Test and Material Certification is available to customer requirements if requested at the time of order. Inspection by outside authorities is also possible. The structure of the assemblies are 1 Core and 304 Braid as standard although 31 is available on request. Page Standard End Fittings 372 Parnor Hose Assemblies 372 Parrap Hose Assemblies 373 THP Hose Assemblies 373 Adflex 374 PED Pressure Equipment Directive 374 Suparflex 37 PED Pressure Equipment Directive 37 Hyparflex 37 PED Pressure Equipment Directive 37 UK: 00 38 24 38 ROI: 10 74 78 3 371
Standard End Fittings The standard range of end fittings are available in both Carbon Steel and Stainless Steel. Certification available, please ask when ordering. Most fittings in these materials can be attached to Stainless Steel hose, please contact your local Pirtek centre. Parnor Hose Assemblies Hose: AISI 31L/DIN 1.44 or AISI 1/DIN 1.441 Braid: AISI 304/DIN 1.4301 Details: Stainless Steel Annular Corrugated Hose with a standard pitch suitable for the majority of applications.. Fixed Male BSPT, BSPP, NPT. Other threads available. Fixed Barrel Male BSPT or NPT. Hygienic Fittings RJT, DIN, IDF and SMS. Swivel Female BSPP Cone or Flat Seat. Also available Fixed BSPT. Pipe and Weld Ends Please specify Length and Pipe Dimensions. Cam and Groove Couplers and Adaptors. Fixed and Swivel Flanges BS, ASA or DIN. Specials also available. DN Braid Ext Dia Min Bend Radius Max Working Pressure BAR PSIG No Braid 9.8 No Braid 1.2 1 1 2 No Braid 18. 24 1 2 No Braid 28.3 3 87 No Braid 34.8 42 4. No Braid 44 1 4. No Braid 2.4 1 1 0 No Braid 4.8 73 3 44 No Braid 7. 1 1 14. No Braid 89.8 130 1 14. 0 No Braid 114.0 0 0.9.0 1 No Braid.0 0 0.9.0 No Braid 11.0 290 0. 8.0 1 Braid 11.4 0 2900 1 Braid 17.8 38 131 1900 1 Braid.2 4 11 170 1 Braid 29.9 70 9 00 1 Braid 3.4 8 4 78 1 Braid 4.4 4 1 Braid 4.4 130 37 3 0 1 Braid 7.3 10 1 Braid 78. 3 2 377 1 Braid 91.9 0 22 31 0 1 Braid 9.0 0 18.4 27 1 1 Braid 10 2 11. 17 1 Braid 1.0 0 11.2 2 Braid 13 2973 2 Braid 19.4 13 198 2 Braid 21.8 1 1813 2 Braid 31. 87 2 2 Braid 38.0 70 1 2 Braid 47.4 8 841 2 Braid.4 44 38 0 2 Braid 9.8 47 82 2 Braid.7 3 4 7 2 Braid 94.1 0 0 2 Braid 1.0 0 33 479 1 2 Braid 1.0 2.7 300 2 Braid 1 0 290 372 www.pirtek.com
Industrial Hose & Couplings METALLIC HOSE ASSEMBLIES Parrap Hose Assemblies THP Hose Assemblies Hose: AISI 31L/DIN 1.44 or AISI 1/DIN 1.441 Braid: AISI 304/DIN 1.4301 Details: Stainless Steel Annular Corrugated Hose with a very close pitch for extreme flexibility. Exceeds the requirements of ISO 3 Type 1 (High Flexibility) by %. Hose: AISI 31L/DIN 1.44 Braid: AISI 304/DIN 1.4301 Details: High pressure Stainless Steel Annular hose with a close pitch and TWO heavy braids. DN Braid Ext Dia Min Bend Radius Max Working Pressure BAR PSIG No Braid 9.8 9 27 390 No Braid 1.2 14 14 No Braid 18. 21 9 130 No Braid 28.3 4. No Braid 34.8 37 2. 3 No Braid 44 4 2. 3 No Braid 2.4 2 29 0 No Braid 4.8 1.7 No Braid 7. 0.8 No Braid 89.8 97 0.8 0 No Braid 114.0 113 0. 9 1 No Braid.0 1 0.4 No Braid 11.0 0.3 4 1 Braid 11.4 0 2900 1 Braid 17.8 131 1900 1 Braid.2 11 170 1 Braid 29.9 38 9 00 1 Braid 3.4 4 4 78 1 Braid 4.4 8 4 1 Braid 4.4 70 37 3 0 1 Braid 7.3 8 1 Braid 84 31 40 1 Braid 2. 1 3 0 1 Braid 9. 218 290 1 1 Braid 1.0 1 2 1 Braid 177.0 290 14 3 2 Braid 13.0 2973 2 Braid 19.4 13.0 198 2 Braid 21.8 1.0 1813 2 Braid 31. 87.0 2 2 Braid 38.0 70.0 1 2 Braid 47.4 8.0 841 2 Braid.4 44.0 38 0 2 Braid 9.8 47.0 82 2 Braid.7 4.0 7 2 Braid 94.1.0 0 2 Braid 1.0 30 479 1 2 Braid 1.0.7 300 2 Braid 1.0 290 DN Braid Ext Dia Max Working Min Bend Max Test Burst Pressure Radius Pressure Pressure BAR PSIG BAR PSIG BAR PSIG 2 Braid 13 293 3 2 1487 2 Braid 19.4 2 3 38 290 4 7 113 2 Braid 21.8 213 3090 4 277 1 747 830 2 Braid 30.7 147 2130 70 191 2770 13 74 2 Braid 142 0 8 184 270 498 72 2 Braid 49 134 194 174 470 81 2 Braid 7.4 4 1 130 13 190 33 2 0 2 Braid 9.8 92 133 10 119 17 1 4 UK: 00 38 24 38 ROI: 10 74 78 3 373
Adflex Description: Parmeca corrugated flexible metal hose assembly with parallel corrugations. Flexible hose meeting the requirements of the class 1 of the EN ISO 3 standard. Corrugated hose: AISI: 31L DIN: 1.44 EN: 2 Cr Ni Mo 172 AISI: 1 DIN: 1.441 EN: Cr Ni Ti 18 Braid: AISI: 304 DIN: 1.31 EN: Cr Ni 18 ND Braid (t) o.d. PMA (Bars) Dyn R Stat R GD GND LD LND (0.in) 8 (0.3in) (0.3in) (0.in) 1 (0.9in) (0.7in) (1in) 9.8 11.4 11.9 1 14. 1.1 1. 18.2 19. 21.1.4 27.0 30.8.4 3 18 11 1 8 1 7 0. 38 1 130 1 19 2 20 9 11 14 38 1 4 18 8 70 30 8 PED Pressure Equipment Directive GD Dangerous Gas LD Dangerous Liquid GND Non dangerous Gas LND Non Dangerous Liquid Requirements related to the PED, according to Pr EN 148. PS 0. b Not subject to. Subject to, and meeting the requirements of the EN ISO 3 std (rules of art). Z Cat. 1 & 2 Subject to, refer to the standard or the Tubest technical guide. Cat. 3 On request. Temperature: Determination of the PED category: Do not take the working temperature into account. PMA calculation: refer to the derating factors of the EN ISO 3 standard. 374 www.pirtek.com
Suparflex Industrial Hose & Couplings METALLIC HOSE ASSEMBLIES Description: Parnor corrugated flexible metal hose assembly with close pitch annular corrugations, obtained by hydroforming. Flexible hose meeting the requirement of the class 1 of the ENISO3 standard. Corrugated hose: AISI: 31L DIN: 1.44 EN: 2 Cr Ni Mo 172 AISI: 1 DIN: 1.441 EN: Cr Ni Ti 18 Braid: AISI: 304 DIN: 1.31 EN: Cr Ni 18 ND Braid (t) o.d. PMA (Bars) Dyn R Stat R GD PED CATEGOR: CA CAT2 According to Pressure (Bar) GND LD LND (0.in) (0.3in) (0.in) (0.7in) (1in) (1.in) (1.in) 0 (2in) (2.in) (3in) 0 (4in) 1 (in) (in) 9.8 11.4 1.2 17.8 18..2 28.3 29.9 34.8 3.4 44 4.4 2.4 4.4 4.8 7.3.9 84 99. 2.. 9..0 1.0 174.0 177.0 18 1 0 4.3 0 3 3 2.2 2.1 1.3 1.4 0. 1 0.4 13 0.3 11 1 1 2 20 300 3 390 40 0 70 00 1 24 39 3 0 42 73 1 90 1 11 73 1 89 17 8 2 290 147 3 19 390 PS 31.2 PS 31.2 PS PS PS PS PS 1.4 PS 1.4 PS 1.4 PS 1.4 PS. PS. PS. PS. PS PS PS PS Cat 2 PS 8 PS 8 Cat 2 PS. PS. PS PS PS PS PED Pressure Equipment Directive GD Dangerous Gas LD Dangerous Liquid GND Non dangerous Gas LND Non Dangerous Liquid Requirements related to the PED, according to Pr EN 148. PS 0. b Not subject to. Subject to, and meeting the requirements of the EN ISO 3 std (rules of art). Z Cat. 1 & 2 Subject to, refer to the standard or the Tubest technical guide. Cat. 3 On request. Temperature: Determination of the PED category: Do not take the working temperature into account. PMA calculation: refer to the derating factors of the EN ISO 3 standard. UK: 00 38 24 38 ROI: 10 74 78 3 37
Hyparflex Description: Parrap corrugated flexible metal hose assembly with close pitch annular corrugations, obtained by hydroforming. Flexible hose meeting the requirement of the class 1 of the ENISO3 standard. Corrugated hose: AISI: 31L DIN: 1.44 EN: 2 Cr Ni Mo 172 AISI: 1 DIN: 1.441 EN: Cr Ni Ti 18 Braid: AISI: 304 DIN: 1.4301 EN: Cr Ni 18 ND Braid (t) o.d. PMA (Bars) Dyn R Stat R GD PED CATEGOR: CA CAT2 According to Pressure (Bar) GND LD LND (0.in) (0.3in) (0.in) (0.7in) (1in) (1.in) (1.in) 0 (2in) (2.in) (3in) 0 (4in) 1 (in) (in) 9.8 11.4 1.2 17.8 18..2 28.3 29.9 34.8 3.4 44 4.4 2.4 4.4 4.8 7.3.9 84 99. 2.. 9..0 1.0 174.0 177.0 18 11 2.2 1.8 1. 1.2 1 0. 0.7 0.4 1 0. 13 0.2 11 1 4 19 19 2 2 293 34 49 3 00 9 14 21 38 37 4 4 8 70 8 97 1 113 218 1 290 PS 31.2 PS 31.2 PS PS PS PS PS 1.4 PS 1.4 PS. PS. PS PS Cat 2 Cat 2 PS PS PS PS PS 1.4 PS 1.4 PS. PS. PS PS PS 8 PS 8 PS. PS. PED Pressure Equipment Directive GD Dangerous Gas LD Dangerous Liquid GND Non dangerous Gas LND Non Dangerous Liquid Requirements related to the PED, according to Pr EN 148. PS 0. b Not subject to. Subject to, and meeting the requirements of the EN ISO 3 std (rules of art). Z Cat. 1 & 2 Subject to, refer to the standard or the Tubest technical guide. Cat. 3 On request. Temperature: Determination of the PED category: Do not take the working temperature into account. PMA calculation: refer to the derating factors of the EN ISO 3 standard. 37 www.pirtek.com