Warranty Statement JHawk Instrument Inc. warrants the component parts and workmanship of its products under normal use and service for a period of one year from the date of the shipment. All obligations and liabilities assumed under this warranty are limited to the repair or replacement, at our option, FOB JHawk, of defective units that are returned, carrier charges prepaid. Improper use, application or servicing voids all warranties. In no event shall JHawk be liable for indirect or consequential damages arising out of the provision or use of its products. Warranty on products and accessories furnished by JHawk but not manufactured by JHawk, shall be limited to the respective product and/or accessory manufactured for such units. JHawk makes no warranties of any kind or nature on such equipment, and in no event shall JHawk be liable for indirect or consequential damages arising out of the provision or use of these products. 2
Table of Contents Utility Gauges 5 Liquid Fillable BB Gauges 6 Liquid Filled Gauges 7 Liquid Fillable SS Gauges 8 Solid Front Process Gauges with Phenolic Case 9 Back Connected Bi-Metal Thermometers 10 Adjustable Angle BI-Metal Thermometers 11 316 SS Thermowells 12 Brass Ball Valves 13 1-PC Hexagon Reduced Bore Ball Valves 14 2 Piece Full Port Ball Valves Screwed End V-2 15 2 Piece Full Port Ball Valves Screwed End V-2NF 16 3 Piece Full Port Ball Valves V3-M 17 Mini Valves 18 Needle Valves 19 Compression Fitting Needle Valves 20 In-Line Check Valves 21 3-PC Wafer Disc Check Valves V3 - WC 22 Y Strainer 23 Butterfly Valves 24-25 Brass Gate Valves 26 Leveling Saddles 27 Index 28 notes 29 3
4
Utility Gauges Features Dial Size: 1 1/2, 2 & 2 1/2 Superb quality, economically priced ISO 9002 certified facility Utility steel case gauges are an economical and general purpose gauge for pressure measurements from vacuum/compound through 10,000 psi. Typical applications include pumps, compression, pool filters, commercial and industrial equipment. 1 1/2 Steel Case 2 2 1/2 Lower Connection Gauge Size/Type A B C D E F 1 1/2 Inch 1.66 0.99 1.45.33.32 1.61 2 mm 42 25 37 8 5 41 Inch 2.08 1.13 1.8 0.37 0.39 2.01 mm 53 28 46 9 10 51 2 1/2 Inch 2.48 1.13 1.95.42.39 2.43 mm 63 29 50 11 10 62 Back Connection Gauge Size/Type A B E F G 1 1/2 Inch 1.60 0.99 0.31 1.61 1.56 mm 42 25 8 41 40 Inch 2.08 1.13.39 2.01 1.85 2 mm 53 29 10 51 47 2 1/2 Inch 2.49 1.13.39 2.44 1.87 mm 63 29 10 62 47 5
Liquid Fillable BB Gauges Features Dial Size: 2 1/2 Superb quality, economically priced ISO 9002 certified facility Pressure range to 10,000 psi Liquid fillable BB gauges offer exceptional service in applications where strict vibration or pulsation occur. Liquid filled gauges offer a significant cushioning and dampening effect reducing pointer flutter and internal gauge damage. These gauges have an integral bourdon tube which is soldered or brazed directly into the one-piece case/socket. BBS CASE Lower Connection BACK Connection Gauge Size/Type A B C D E F 2 1/2 Inch 2.60 1.50 2.20 0.41 1.21 2.44 mm 66 38 56 10 31 62 Gauge Size/Type A B F G 2 1/2 Inch 2.60 1.50 2.44 2.46 mm 66 38 62 62 6
Features Dial Size: 1 1/2, 2 1/2 & 4 Superb quality, economically priced ISO 9002 - certified facility Pressure range to 15,000 psi Liquid Filled Gauges Liquid filled SS case, brass internal gauges are designed to perform in rugged applications and harsh environmental conditions - especially where pulsation and vibration are a problem. Liquid filled gauges offer a significant cushioning and dampening effect reducing pointer flutter and internal gauge damage. 2 1/2 Case 4 Lower Connection Gauge Size/Type A B C D E F 1 1/2 Inch 1.78 1.00 1.50 0.34 0.19 1.84 mm 45 25 38 9 5 47 2 1/2 Inch 2.62 1.13 2.08 0.39 0.22 2.45 4 mm 66 29 53 10 5 62 Inch 4.29 1.42 3.14 0.46 0.29 3.88 mm 109 36 80 12 7 98 Back Connection Gauge Size/Type A B F G 1 1/2 Inch 1.78 1.00 1.61 1.62 mm 45 25 41 41 2 1/2 Inch 2.62 1.13 2.45 2.05 mm 66 29 62 52 7
Liquid Fillable SS Gauges Features Dial Size: 1 1/2, 2 1/2 &4 Superb quality, economically priced ISO 9002 - certified facility Pressure range to 15,000 psi 4 Liquid fillable all stainless steel gauges are the ultimate incorrosion resistant, heavy duty, vacuum and pressure gauges. They are used in corrosive service where ruggedness and reliability are critical. Typical applications include chemical and petroleum refineries, pharmaceutical, offshore drilling and production, paper mills, fertilizer, etc. 2. 1/2 Lower Connection Gauge Size/Type A B C D E F 1 1/2 Inch 1.78 1.00 1.50.34.19 1.61 mm 45 25 38 9 5 41 2 1/2 Inch 2.62 1.13 2.08.39.22 2.45 mm 66 29 53 10 5 62 Inch 4.29 1.42 3.14.46.29 3.88 mm 109 36 80 12 7 98 4 8 Back Connection Gauge Size/Type A B F G 1 1/2 Inch 1.78 1.00 1.61 1.62 mm 45 25 41 41 2 1/2 Inch 2.62 1.13 2.45 2.05 mm 66 29 62 52
Solid Front Process Gauges with Phenolic Case The J Hawk solid front process gauges with phenolic case are widely used for petrochemical and chemical processing industries. These gauges are also applied to compressors, water treatment plants, food processing plants, power generating stations and pulsating pumps. There is a solid wall between pressure sensing element and the window. This design provides better safety for monitoring the gauges in the envent of the gauge failure. The bourdon tube has stainless steel internal parts such as bourdon tube, socket, movement and screw washers. The stainless steel sensing element is suitable for use in corrosive media and the pressure system is not subject to damage. JHawk Gauge offers liquid fillable cases. The liquid filling may be glycerin or silicone. This gauge features a filling vent. This special design lets users quickly and conveniently fill dry gauges without special tools or fixtures. Case Dial Size A B D E F G H I J 4 1/2 5.813 0.236 4.006 1.493 3.378 1.021 0.589 5.067 1.610 115 mm 148 6 102 38 86 26 15 129 41 Specifications Solid front with pressure relief back to ASME B40.1 standard that will reduce the possibility of window failure and projection of parts outward through the front of the gauge. Dial Size Case & Ring Socket Material Movement 4 ½ (115mm) Phenolic case & bezel ring threaded with a gasket 316 Stainless steel 304 Stainless steel The phenolic case and Polyimide ring supply better performance to resist rugged, corrosive and high temperature environment. Mounting Window Material Stem, surface & flush Tempered Safety Glass The stainless steel rotary geared movement reduces friction and corrosion which assures a smooth-moving pointer and accurate pressure indication. Bourdon Tube Pointer 316 Stainless steel Anodized aluminum with black finish Maximum and minimum pressure stop of movement can be offered to protect against damage caused by sudden vacuum or over pressure. Scale Adjustment psi, kpa (single or dual) Micro-adjustable pointer Process gauges are equipped with pressure compensating diaphragm installed in the casing back and connected to the outer atmosphere by compensating hole. Connection Size Accuracy 1/2 & 1/4 NPT standard Grade 2A to ASME B40.1 (Full scale 0.5% accuracy) 9
Back Connected Bi-Metal Thermometers Model 300 3 Diameter Head with Calibrator Model 500 5 Diameter Head with Calibrator Features Type 304 stainless steel All welded construction Easy to calibrate Dial printed with large black numbers and graduations - easy to read from any angle Hermetically sealed per ASME B40.3 Connection nut: 1/2 NPT Stem diameter 1/4 Standard stem lengths (including threads): 2 1/2, 4, 6, 12, 15, 18 & 24 Actuated by super-sensitivemetallic Helix Coil Bi-Metal element dampened with silicone for minimum vibration and maximum heat transfer Accuracy to within 1% total scale range Extra heavy glass crystal. Plastic or tempered crystal available Back Connection Temperature Ranges Size In Inches A B C 3 2.76 3.23 0.75 5 4.53 5.12 0.87 D In Inches 0.25 S In Inches 2-1/2 4 6 9 12 Fahrenheit /Div 80 to 120 2 0 to 250 2 50 to 300 2 50 to 500 5 100 to 800 5 200 to 1000 10 10
Adjustable Angle BI-Metal Thermometers Features Type 304 stainless steel All welded construction Easy to calibrate Dial printed with large black numbers and graduations - easy to read from any angle Hermetically sealed per ASME B40.3 Connection nut: 1/2 NPT Stem diameter 1/4 Standard stem lengths (including threads): 2 1/2, 4, 6, 12, 15, 18 & 24 Actuated by super-sensitive-metallic helix coil Bi-Metal element dampened with Silicone for minimum vibration and maximum heat transfer Accuracy to within 1% total scale range Extra heavy glass crystal. Plastic or tempered crystal available Adjustable Angle Connection Size In Inches A B C 3 2.76 3.23 0.75 5 4.53 5.12 0.87 D In Inches 0.25 S In Inches 2-1/2 4 6 9 12 11
316 SS Thermowells.260 Bore.260 Threaded Thermowells Size P Dim. In Inches No Lag U In Inches Stem S Dim.718 Bore 1/2 NPT, 3/4 NPT or 1 1 5/8 2 1/2 2 3-3/4 2 1/2 4 3 4-3/4 4 5-3/4 4 1/2 6 6 7-3/4 7 1/2 9 8 7-3/4 10 1/2 9-3/4 U DIM in inches A DIM in inches 2 3-3/4 3 4-3/4 4 5-3/4 6 7-3/4 8 9-3/4.718 Bore 12.260 Bore
Brass Ball Valves Features Standard teflon seats Chrome plated ball Full-Port 600 psi WOG 1/4-4 Size In Inches 1/4 3/8 A B C D DN CH 1/2 3.78 1.93 2.91.87.59.98 3/4 3.78 2.17 3.15.87.79 1.22 1 4.72 2.48 3.43.87.98 1.57 1-1/4 4.72 2.68 4.33 1.06 1.26 1.93 1-1/2 5.91 3.04 4.69 1.06 1.57 2.16 2 5.91 3.66 5.31 1.26 1.97 2.68 3 4 13
1-PC Hexagon Reduced Bore Ball Valves Features Pipe thread in accordance with ANSI B2.1, ANSI B1 20 1983, BS21-1973; ISO 228 Blow-out proof stem 2000 psi (138 BAR) WOG Material: ASTM-A351-CF8, ASTM-A351- CF8M, /A1018 Optional wing handles The 1-PC hexagonal reduced bore ball valve is made of stainless steel or carbon steel. Materials # Parts Carbon Stainless 1 Body A1018 CF8M 2 Insert A1018 SS 316 3 Ball CF8M CF8M 4 Seat TEFLON TEFLON 5 Stem SS 316 SS 316 6 Spring Washer SS 304 SS 304 stem 7 Seal TEFLON TEFLON 8 Lever Handle SS 304 SS 304 9 Handle Sleeve PLASTIC PLASTIC 10 Nut SS 304 SS 304 11 Washer SS 304 SS 304 14 SIZE in inches 1/4 3/8 1/2 3/4 1 1-1/4 1-1/2 2 A 2.402 3.386 4.331 4.331 4.765 5.748 5.748 5.984 B 1.122 1.319 2.492 2.441 2.626 3.252 3.252 3.411 C 1.626 1.839 2.252 2.563 3.000 3.626 3.874 4.500 D 0.197 0.283 0.354 0.492 0.591 0.787 0.984 1.260
2 Piece Full Port Ball Valves Screwed End V-2 Features Pipe thread in accordance with ANSI B2.1, BS 21 1973 With mounting pad Blow-out proof stem/full port Investment casting body and cap 2000 psi WOG Locking device. Size 1/4-2 # Parts Qty Materials V2-316 V2 - WCB 1 Body 1 ASTM-A351-CF8M ASTM-A216-WCB 2 Cap 1 ASTM-A351-CF8M ASTM-A216-WCB 3 Ball 1 ASTM-A351-CF8M ASTM-A351-CF8M 4 Ball Seat 2 15%R-PTFE 15%R-PTFE 5 Joint Gasket 1 PTFE PTFE 6 Stem 1 AISI 316 AISI 316 7 Thrust Washer 1 PFTE PFTE 8 Stem Packing 2 PFTE PFTE 9 Gland Nut 1 AISI 304 AISI 304 10 Handle 1 AISI 304 AISI 304 11 Spring Washer 1 AISI 304 AISI 304 12 Stem Nut 1 AISI 304 AISI 304 13 Plastic Cover 1 PLASTIC PLASTIC 14 Lock Device 1 AISI 304 AISI 304 Stainless Steel AISI-316 (ASTM-A351-CF8M) Carbon Steel S-45C (ASTM-A216-WCB) Size d d1 L L1 H W S S1 X N P BL in inches inches CV Torque Weight Factor In lbs 1/4 0.457 0.276 2.456 0.496 2.008 4.134 0.650 0.402 0.197 0.492 1.122 5/16 6.6 35 0.639 3/8 0.500 0.335 2.500 0.520 2.008 4.134 0.650 0.402 0.197 0.492 1.122 5/16 7.9 35 0.639 1/2 0.591 0.492 2.913 0.657 2.087 4.134 0.650 0.402 0.197 0.492 1.122 5/16 11.2 47 0.772 3/4 0.787 0.689 3.228 0.717 2.323 4.921 0.787 0.531 0.259 0.827 1.370 3/8 21 65 1.213 1 0.984 0.929 3.878 0.874 2.874 6.229 0.925 0.630 0.315 0.886 1.370 7/16 35 90 1.984 1-1/4 1.260 1.213 4.409 0.925 3.071 6.299 0.925 0.630 0.315 0.925 1.500 7/16 57 117 2.954 1-1/2 1.496 1.441 4.980 0.925 3.583 7.480 1.004 0.669 0.354 0.925 1.500 1/2 80 156 4.497 2 1.969 1.870 5.984 1.094 3.898 7.480 1.004 0.669 0.354 0.925 1.500 1/2 148 217 7.275 15
2 Piece Full Port Ball Valves Screwed End V-2NF Size 1/4-4 # Part Qty Materials V2 -NF 1 Body 1 ASTM-A351-CF8M 2 Cap 1 ASTM-A351-CF8M 3 Ball 1 ASTM-A351-CF8M 4 Ball Seat 2 15%R-PTFE 5 Joint Gasket 1 PFTE 6 Stem 1 AISI 316 7 Thrust Washer 1 PFTE 8 Stem Packing 2 PFTE 9 Gland Nut 1 AISI 304 10 Handle 1 AISI 304 11 Spring Washer 1 AISI 304 12 Stem Nut 1 AISI 304 13 Plastic Cover 1 PLASTIC 14 Lock Device 1 AISI 304 Features Pipe thread in accordance with ANSI B2.1, BS 21 1973 With mounting pad Blow-out proof stem/full port Investment casting body and cap 2000 PSI (138 BAR) WOG Locking device Stainless Steel AISI-316 (ASTM-A351-CF8M) 16 Nominal Size in inches d L H W S S1 X N P BL inches CV Torque Factor In lbs Weight 1/4 0.457 2.352 2.087 4.134 0.650 0.402 0.197 0.492 1.122 5/16 6.6 40 0.728 3/8 0.500 2.382 2.087 4.134 0.650 0.402 0.197 0.492 1.122 5/16 7.9 40 0.728 1/2 0.591 2.451 2.087 4.134 0.650 0.402 0.197 0.492 1.22 5/16 11.2 47 0.750 3/4 0.787 30.31 2.362 4.921 0.787 0.531 0.256 0.827 1.370 3/8 21 68 1.323 1 0.984 3.543 2.913 6.299 0.925 0.630 0.315 0.886 1.370 7/16 35 92 2.249 1-1/4 1.260 3.937 3.150 6.299 0.925 0.630 0.315 0.925 1.500 7/16 57 130 3.461 1-1/2 1.496 4.646 3.622 7.480 1.004 0.669 0.354 0.925 1.500 1/2 80 174 5.027 2 2.000 5.433 3.976 7.480 1.004 0.669 0.354 0.925 1.500 1/2 150 243 8.157 2-1/2 2.559 6.575 5.118 9.646 1.614 1.161 0.472 1.378 2.205 3/4 265 434 15.653 3 3.150 7.598 5.591 9.646 1.614 1.161 0.472 1.378 2.205 3/4 415 668 25.750 4 3.937 10.236 6.850 12.795 1.890 1.437 0.630 1.969 2.408 1 780 955 50.706
3 Piece Full Port Ball Valves V3-M Features Pipe thread in accordance with ANSI B2.1, BS21 1973 Blow-out proof stem/full port Investment casting body and cap 1500-1/4-1.5 1000-2 PSI (69 Bar) WOG Mounting flanged for ISO Standard 5211 Screwed end, butt weld end, socket weld end Material: ASTM-A351-CF8M Stainless Steel AISI 316 Item Materials # Parts Qty V3M 1 Body 1 ASTM-A351-CF8M 2 Cap 2 ASTM-A351-CF8M 3 Ball 1 ASTM-A351-CF8M 4 Ball Seat 2 15%R-PTFE 5 Joint Gasket 2 15%R-PTFE 6 Stem 1 AISI 316 7 Thrust Washer 1 PFTE 8 Stem Packing 1 PFTE 9 Gland Nut 1 AISI 304 10 Handle 1 AISI 304 11 Spring Washer 1 AISI 304 12 Stem Nut 1 AISI 304 13 Plastic Cover 1 PLASTIC 14 Lock Device 1 AISI 304 15 Bolt 4(4X6 SET) AISI 304 16 Spring Washer 4(4X6 SET) AISI 304 17 Hex Nut 4(4X6 SET) AISI 304 18 Stop Pin 1 AISI 304 Size 1/4-2 Nominal Size in inches d L H W S S1 X BL inches CV Torque Weight Factor In lbs 1/4 0.457 2.559 2.008 4.124 0.650 0.402 0.197 5/16 6.6 35 0.970 3/8 0.500 2.559 2.008 4.134 0.650 0.402 1.197 5/16 7.9 35 0.970 1/2 0.591 2.598 2.165 4.921 0.728 0.504 0.256 3/8 11.2 47 1.477 3/4 0.787 3.189 2.362 4.921 0.787 0.531 0.256 3/8 21 68 1.940 1 0.984 3.740 2.913 6.299 0.945 0.630 0.315 7/16 35 92 2.778 1-1/4 1.260 4.291 3.150 6.299 0.945 0.630 0.315 7/16 57 130 4.497 1-1/2 1.496 5.079 3.622 7.480 1.024 0.669 0.354 1/2 80 174 6.173 2 2.00 5.906 3.976 7.480 1.024 0.669 0.354 1/2 150 243 9.458 17
Mini Valves Technical Data 1/4 NPT (all configurations) Carbon steel & 316 SS 3,000 psi max O-ring stem seal Teflon soft seat Description Feature relatively high pressure rating, soft seats and stainless steel stems at an economical price. These units are O-ring sealed and stem locknut is standard for tamper proof operation. The seat is encapsulated by the bonnet and provides a positive seal against the stem. Mini Needle Valves TYPE SIZE A B C D F X F 1/4 NPT 1.59.75 1.06 -- M X F 1/4 NPT 1.72.75 1.06 0.50 M X M 1/4 NPT 1.88.75 1.56 0.50 18
Features 1/4-1/2 NPT inline (all configurations) Carbon steel & 316 SS 10,000 psi max O-ring stem seal Metal seat Applications Needle Valves Valves are available in bar stock models and can be used to pressures up to 10,000 psi. Designed for a wide variety of applications requiring throttling or shut off. This is an extremely versatile valve with a wide selection of inlet and outlet configurations. Needle Valves TYPE SIZE A B C D F X F 1/4 NPT.98 2.16 3.03 ---- M X F 1/4 NPT.98 2.66 3.03 0.50 F X F 1/2 NPT 1.44 2.69 3.31 ---- M X F 1/2 NPT 1.44 3.41 3.31.72 19
Compression Fitting Needle Valves Description Compression fitting ends are provided for integration of the valve with standard tubing. The compression fitting is more economical to install and can be used up to pressures 6,000 psi. Size A B C 1/4 2.559 0.984 3.74 3/8 2.559 0.984 3.78 1/2 2.913 0.984 3.563 3/4 3.312 1.250 3.875 20
In-Line Check Valves Features Choice of body material Brass or 316 stainless Viton o-ring seat 316 SS spring and ball standard Application For liquid, air, gas, vapor, steam or cryogenic service. Suitable for injection lines such as chemical and lubrication. Standard spring opens with 10 psi flow pressure. Connection WP Material 1/4 NPT FXM 3000# MAX Brass 1/4 NPT FXM 6000# MAX 316 SS 1/8 NPT FXM 3000# MAX Brass 1/8 NPT FXM 6000# MAX 316 SS Item Parts Material 1 Outer Body 316 SS Outer Body Brass 2 Spring 316 SS 3 Ball 316 SS 4 O-Ring Vitan 5 Inlet Body 316 SS Inlet Body Brass Steel Case 21
3-PC Wafer Disc Check Valves Investment Casting V3 - WC Features Size: 1/2-4 Body in ASTM A351-CF8M Trim in ASI 316 Disc in ASTM-A351 -CF8M 2000 psi Suitable for horizontal or vertical installation Connection D d L W K S Lbs. Size 1/2.59.59 2.66 1.00 2.17 2.80 1.26 3/4.79.59 2.66 1.00 2.17 2.80 1.43 1 1.00.79 2.95 1.09 2.50 3.15 1.70 1-1/4 1.26.98 3.25 1.18 3.03 3.76 2.62 1-1/2 1.50 1.18 3.86 1.39 3.43 4.17 3.62 2 2.00 1.50 4.29 1.52 4.29 5.04 5.09 2-1/2 2.56 2.46 5.51 1.85 5.35 6.42 11.16 3 3.15 3.03 6.06 2.07 6.46 7.60 17.26 4 3.94 3.78 7.68 2.68 8.11 9.49 34.70 22
Y Strainers Features Investment casting body Max. Pressure 800 PSI Max. working temperature 487 F Thread end conform to ANSI B2, 1, BS 21 Nominal Size in inches D L H H1 A B 1/4.39 2.24 1.38 1.77.63.31 3/8.39 2.24 1.38 1.77.63.31 1/2.59 2.36 1.50 2.01.63.31 3/4.79 2.72 1.65 2.17.63.31 1.98 3.35 1.97 2.60.81.39 1-1/4 1.26 3.90 2.17 2.87.98.47 1-1/2 1.50 4.37 2.32 3.15.98.47 2 2.01 5.39 2.87 3.94 1.26.47 of standard Screen Item # Parts Materials 1 Body ASTM-A351-CF8M 2 Cap AISI 316 3 Ball PTFE 4 Ball Seats ASTM-A351-CF8M 5 Joint Gasket VITON 6 Stem ASTM-A351-CF8M 23
Butterfly Valves Features & Benefits Primary stem seal, formed by preloaded contact of disc hub with flattened seat surfaces, completely isolates stem and body parts from the media. Secondary stem seal, formed by an engineered interface fit of the stem through the seat, provides additional sealing integrity. Rounded, polished disc edge provides full 360 degrees concentric seating, minimum flow restriction, lower seating and unseating torques and maximum seat life. Superior, one-piece thru-shaft design proves high strength and positive disc control. Molded-in O-ring provides positive seal against standard ANSI flange faces. Replaceable seat, also serving as flange gasket, isolates stem and body parts from the line media. Self-adjusting, bi-directional stem seal, located in the upper journal, is suitable for vacuum and pressure, preventing external contamination of the stem area. Dove-tail seat retention method eliminates the need for bonding, making seat replacement easy and fast. Extra heavy edge section resists tearing. Factory testing to 110% of specified pressure rating of each valve assures drop-tight shutoff. Cast in top plates are an integral part of the body and are standardized to allow direct mounting all actuators. 24
Butterfly Valves Wafer Type Applications The JHawk Instrument Inc. butterfly valve is a heavy duty, resilient seated butterfly valve that is ideally suited for many tough applications, such as bulk handling and tank trailers. Parts Material Materials Specifications ASTM Remarks Body ductile Iron A-536-65-45-12 2 ~ 10 Liner Stem NBR Buna Viton STAINLESS STEEL A 182F 410 A 182F 304 A 182F 316 Disc STAINLESS STEEL A351 CF8M Taper Pin STAINLESS STEEL A 182F 316 Bushing NYLON O-Ring NBR (NITRILE) 14 º~ 176 º F 10 ~ 400 º F Technical Data Size 2-10 Range Pressure 150 psi Range Flange ANSI 125/150 Standard valve Size A B C D E F G C1 D1 B1 B2 lbs. 2 2.52 5.91 6.57 2.52 5.75 4.92 6.22 1.69.1.97 51.31 8.82 2 1/2 3.07 6.18 6.57 3.07 5.79 4.92 6.22 1.81 2.56.51.31 9.92 3 3.19 6.54 6.57 3.19 6.38 4.92 6.22 1.81 3.15.51.31 10.58 4 4.06 7.40 8.86 4.06 7.24 4.92 6.22 2.05 3.86.63.43 14.77 5 4.72 7.83 8.86 4.72 7.68 4.92 6.22 2.20 4.88.63.43 19.84 6 5.43 9.02 8.86 5.43 8.86 4.92 6.22 2.20 5.83.79.43 23.15 8 6.89 10.08 13.58 6.89 10.08 6.89 9.25 2.36 7.83.87.51 37.48 10 8.03 11.34 13.58 8.03 11.34 6.89 9.25 2.68 9.80.98.63 55.16 25
Brass Gate Valves Technical Standard Nominal pressure: 200 psi Working medium: water, oil, gas Working temperature 338º F Taper pipe thread to ANSI B1.20 NPT Connection Size in inches L B H D 1/4 40 9.5 61.5 45 3/8 42 9.5 61.5 45 1/2 43 12.8 72.1 55 3/4 45 17 76.7 55 1 52 21 87.6 60 1-1/4 59.5 27 103 72 1-1/2 63 34 113.7 72 2 69 45 147.7 80 2-1/2 88 56 163.5 100 3 95 68 190 110 26 4 114 90 235 130
Leveling Saddles Features Ductile iron construction Standard 2 NPT meter mount Pipe sizes: 2, 3, 4, 6 & 8 Technical Data Application A leveling saddle is an accepted means to support chart recorders and electronic flow meters on meter runs or an an economical means to support pipe runs. Specifications Size - 2, 3,4, 6 & 8 Saddle - Ductile Iron Materials Mount - Ductile Iron U-Bolt - Carbon Steel 27
Index 1-PC Hexagon Reduced Bore Ball Valves 14 2-Piece Full Port Ball Valves Screwed End V-2 15-17 3-PC Wafer Disc Check Valves V3 - WC 24 3-Piece Full Port Ball Valves V3-M 18-19 316 Bore Thermowells 12 Adjustable Angle BI-Metal Thermometers 11 Back Connected BI-Metal Thermometers 10 Brass Ball Valves 13 Brass Gate Valves 26 Butterfly Valves 24-25 Compression Fitting Needle Valves 20 In-Line Check Valves 21 Leveling Saddles 27 Liquid Fillable BB Gauges 6 Liquid Filled Gauges 7 Liquid Fillable SS Gauges 8 Mini Valves 18 Needle Valves 19 Solid Front Process Gauges with Phenolic Case 9 Utility Gauges 5 Y Strainer 23 28
Notes 29
30 Notes
31
13313 Western Oak Helotes, Texas 78023 210-408-6393 Office 210-408-0140 Fax Local Distributor 2004