GS-HYDRO GATES HOSES & CARBON STEEL COUPLINGS

GS-HYDRO GATES HOSES & CARBON STEEL COUPLINGS

General Information GS-Hydro supplies a comprehensive selection of hoses and hose couplings which includes BSP, NPT, JIC, Metric, SAE 3000/6000 Flanges and GS Retain Ring Flanges to various applications. GS-Hydro hoses can meet several industry standards and type approvals of main certificate institutes. Please specify your requirements when ordering. In order to guarantee peak performance of the hose, you should select the type of the hose according to specific conditions under which it is to be used. Therefore it is essential to obtain precise information about the application and required connections. Make sure that all requirements of the application are fulfilled. The system should not exceed published working s. Approved working s are indicated in the enclosed table. Do not use hydraulic hoses in place of permanent piping. Flexible hoses are to be used where it is necessary due to vibrations or flexible mounting of the machinery only. For gas applications the cover of the hose needs to be pin-prickled to allow diffused gas to escape and not be accumulated under the cover. Index G1, G2... 4 M3K, M4K... 5 M5K, M6K... 6 C1TH, CM2T Megaflex... 7 EFG3K, EFG4K... 8 EFG5K, EFG6K... 9 1PC PowerClean, 2PC PowerClean... 10 R7 (SAE100 R7)... 11 R8 (SAE100 R8)... 12 375, T9... 13 Ferrules... 14 GS-retain ring flange hose couplings... 17 GS-retain ring flange hose couplings, I-series... 18 G-series & GSP-series couplings BSP 60 cone, BSP/NPT... 19 JIC 37 cone, DKOL/Metric L - Standpipe... 20 DKOS/Metric S, SAE code 61 3000 psi... 21 GL-series SAE code 61 3000 psi... 22 GS-series & GSM-series couplings Ferrules... 22 BSP 60 cone, JIC 37 cone... 23 DKOS/Metric S, SAE code 61 3000 psi... 24 SAE code 62 6000 psi, CAT style O-ring flange... 25 Komatsu, ORFS/SAE J1453... 26 P-series couplings BSP 60 cone... 27 BSP/NPT, JIC 37 cone... 28 DKOL/Metric L, DKOS/Metric S... 29 Standpipe... 30 SAE Code 61 3000 psi, SAE Code 62 6000 psi... 31 JIS, Komatsu, Banjo, Kobelco, Kärcher... 32 ORFS/SAE J1453... 33 I-series interlock couplings DKOS/Metric S... 33 SAE Code 61 3000 psi, SAE Code 62 6000 psi... 34 Ferrules, BSP & NPT couplings, JIC 37 cone... 35 Protection for hoses Pyrojacket, Silicone rubber end dip... 36 Pyrotape, Pyrosil, Silicaflex... 37 Safe spirals... 38 Safe tool... 39 Technical information size selection nomogram... 40 Pressure drop in hoses... 41 Bending radius theory for hoses... 42 3

G1 (EN 853/1SN) TECHNICAL SPECIFICATION: Recommended: Hydraulic systems, lubr. oils Construction: NBR tube 1 wire reinforced SBR-CR cover Temperature: -40 C +100 C Intermittent +120 C Couplings: G-/GSP-series and P-series Compatibility: The hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids ID Code bore O.D Min. burst Max. working [inch] [psi] [bar] [psi] [bar] G1-04 5101001100 1/4 6 13,5 13050 900 3262 225 50 0,22 G1-05 5101001110 5/16 8 15,1 12325 850 3117 215 55 0,26 G1-06 5101001120 3/8 10 17,1 10440 720 2610 180 65 0,32 G1-08 5101001130 1/2 12 20,3 9380 640 2320 160 90 0,39 G1-10 5101001140 5/8 16 23,5 7540 520 1885 130 100 0,46 G1-12 5101001150 3/4 20 27,6 6090 420 1522 105 120 0,59 G1-16 5101001160 1 25 35,4 5075 350 1276 88 150 0,84 G1-20 5101001170 1 1/4 32 43,5 3625 250 913 63 210 1,28 G1-24 5101001180 1 1/2 38 50,0 2900 200 725 50 250 1,46 G1-32 5101001190 2 50 64,0 2320 160 580 40 315 2,07 Min. bend radius Weight [kg/m] G2 (EN 853/2SN) TECHNICAL SPECIFICATION: Recommended: High hydraulic oil lines Construction: NBR tube 2 wire braid reinforcement CR cover Temperature: -40 C +100 C Intermittent +120 C Couplings: G-/GSP-series and P-series Compatibility: The hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids ID Code bore Min. burst Max. working Min. bend O.D radius Weight [kg/m] [inch] [psi] [bar] [psi] [bar] G2-04 5101003100 1/4 6 15,0 23200 1600 5800 400 50 0,35 G2-05 5101003110 5/16 8 16,3 20300 1400 5075 350 55 0,40 G2-06 5101003120 3/8 10 18,8 19140 1320 4785 330 65 0,52 G2-08 5101003130 1/2 12 21,8 15950 1100 3987 275 90 0,63 G2-10 5101003140 5/8 16 25,1 14500 1000 3625 250 100 0,75 G2-12 5101003150 3/4 20 29,0 12325 850 3117 215 120 0,91 G2-16 5101003160 1 25 37,6 9425 650 2392 165 150 1,34 G2-20 5101003170 1 1/4 32 47,5 7250 500 1812 125 210 1,92 G2-24 5101003180 1 1/2 38 54,6 5220 360 1305 90 250 2,23 G2-32 5101003190 2 50 67,3 4640 320 1160 80 315 2,78 4

M3K 3000 psi constant TECHNICAL SPECIFICATION: Recommended: High hydraulic applications Tube: NBR (Nitrile) Reinforcement: -4-5-6-8: one braid of steel wire -10-12-16: two braids of steel wire Cover: NBR/ VC, MSHA approval, available with MegaTuff and XtraTuff covers Temp. range: -40 C to +100 C constant +120 C intermittent Couplings: G-series and P-series Compatibility: The hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids ID Code bore Min. burst Max. working Min. bend O.D radius Weight [kg/m] [inch] [psi] [bar] [psi] [bar] M3K-04 5101006100 1/4 6 12,2 13000 900 3250 225 40 0,17 M3K-05 5101006110 5/16 8 15,1 13000 900 3250 225 45 0,26 M3K-06 5101006120 3/8 10 16,0 13000 900 3250 225 50 0,28 M3K-08 5101006130 1/2 12 20,2 13000 900 3250 225 70 0,41 M3K-10 5101006140 5/8 16 25,2 13000 900 3250 225 75 0,73 M3K-12 5101006150 3/4 19 29,0 13000 900 3250 225 95 0,91 M3K-16 5101006160 1 25,4 37,6 13000 900 3250 225 115 1,55 M4K 4000 psi constant TECHNICAL SPECIFICATION: Recommended: High hydraulic applications Tube: NBR (Nitrile) Reinforcement: 2 braids of high tensile steel wire Cover: NBR/PVC, MSHA approval Available with MegaTuff and XtraTuff covers Temp. range: -40 C to +100 C constant +120 C intermittent Couplings: G-series and P-series Compatibility: The hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids ID Code bore Min. burst Max. working Min. bend O.D radius Weight [kg/m] [inch] [psi] [bar] [psi] [bar] M4K-04 5101006300 1/4 6 13,7 16000 1120 4000 280 40 0,33 M4K-05 5101006310 5/16 8 15,4 16000 1120 4000 280 45 0,34 M4K-06 5101006320 3/8 10 17,5 16000 1120 4000 280 50 0,46 M4K-08 5101006330 1/2 12 20,8 16000 1120 4000 280 70 0,51 M4K-10 5101006340 5/8 16 24,9 16000 1120 4000 280 75 0,74 M4K-12 5101006350 3/4 19 29,0 16000 1120 4000 280 95 0,93 5

M5K 5000 psi constant TECHNICAL SPECIFICATION: Recommended: High hydraulic applications Tube: NBR (Nitrile) Reinforcement: 2 braids of high tensile steel wire Cover: NBR/PVC, MSHA approval Available with abrasion resistant MegaTuff and XtraTuff covers Temp. range: -40 C to +100 C constant +120 C intermittent Couplings: G-series and P-series Compatibility: The hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids ID Code bore Min. burst Max. working Min. bend O.D] radius Weight [kg/m] [inch] [psi] [bar] [psi] [bar] M5K-04 5101006510 1/4 6 13,7 20000 1400 5000 350 50 0,30 M5K-05 5101006520 5/16 8 15,4 20000 1400 5000 350 55 0,34 M5K-06 5101006530 3/8 10 17,5 20000 1400 5000 350 65 0,41 M5K-08 5101006540 1/2 12 20,8 20000 1400 5000 350 90 0,51 M6K 6000 psi constant TECHNICAL SPECIFICATION: Recommended: High hydraulic applications Tube: NBR (Nitrile) Reinforcement: 2 braids of high tensile steel wire Cover: NBR/PVC, MSHA approval Temp. range: -40 C to +100 C constant +120 C intermittent Couplings: G-series and P-series Compatibility: The hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids bore Min. burst Max. working Min. bend ID Code O.D radius Weight [kg/m] [inch] [psi] [bar] [psi] [bar] M6K-04 5101006700 1/4 6 15,0 24000 1680 6000 420 50 0,35 6

C1TH, high temperature TECHNICAL SPECIFICATION: Recommended: Medium and high temperature hose lines Construction: NBR tube 1 wire braid reinforcement CSM (Hypalon) cover Temperature: -40 C +135 C Intermittent +150 C Couplings: G-series and P-series ID Code bore Min. burst Max. working Min. bend O.D radius Weight [kg/m] [inch] [psi] [bar] [psi] [bar] C1TH-06 5101002120 3/8 10 17,4 9135 630 2320 160 65 0,35 C1TH-08 5101002130 1/2 12 20,6 8120 560 2030 140 90 0,43 C1TH-12 5101002150 3/4 19 27,7 5075 350 1305 90 120 0,64 C1TH-16 5101002160 1 25 35,6 4060 280 1015 70 150 0,91 C1TH-20 5101002170 1 1/4 31 43,6 2500 172 625 43 210 1,19 CM2T Megaflex /EN 857, compact hose, very tight bend radius TECHNICAL SPECIFICATION: Recommended: High hydraulic oil lines Construction: NBR tube 2 wire braid reinforcement CR cover Temperature: -40 C +120 C Intermittent +150 C Couplings: G-series and P-series Also available with extremely abraison resistant MegaTuff cover Compatibility: The hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleumbased fluids ID Code bore Min. burst Max. working Min. bend O.D radius Weight [kg/m] [inch] [psi] [bar] [psi] [bar] CM2T-04 5101004100 1/4 6 14,1 23200 1600 5800 400 50 0,31 CM2T-05 5101004110 5/16 8 15,5 20300 1400 5075 350 55 0,35 CM2T-06 5101004120 3/8 10 17,7 19140 1320 4785 330 65 0,42 CM2T-08 5101004130 1/2 12 20,8 15950 1100 3987 275 90 0,51 CM2T-10 5101004140 5/8 16 24,6 14500 1000 3625 250 100 0,70 CM2T-12 5101004150 3/4 19 27,8 12300 850 3100 215 120 0,81 CM2T-16 5101004160 1 25 35,8 9400 650 2400 165 150 1,15 Twin hose CM2T-06TW 5101004300 3/8 10 19140 1320 4785 330 CM2T-08TW 5101004310 1/2 12 15950 1100 3987 275 7

EFG3K 3000 psi constant TECHNICAL SPECIFICATION: Recommended: Extreme high and high impulse hydr. applications Tube: CR (Cloroprebe) Reinforcement: 4 alternating layers of spiralled, high tensile steel wire Cover: CR (Cloroprene). MSHA Approval Available with abrasion resistant MegaTuff cover Temp. range: -40 C to +121 C Couplings: GS-series, GSP-series and P-series Compatibility: The hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids ID Code bore Min. burst Max. working Min. bend O.D radius Weight [kg/m] [inch] [psi] [bar] [psi] [bar] EFG3K-20 5102001000 1 1/4 31 47,0 12000 840 3000 210 210 2,90 EFG3K-24 5102001020 1 1/2 38 53,6 12000 840 3000 210 250 3,20 EFG3K-32 5102001040 2 51 66,8 12000 840 3000 210 635 4,39 EFG4K 4000 psi constant TECHNICAL SPECIFICATION: Recommended: Extremely high and high impulse hydraulic applications Tube: NBR (Nitrile) Reinforcement: 4 alternating layers of spiralled, high tensile steel wire Cover: CR (Chloroprene), MSHA Approval, available with abrasion resistant MegaTuff cover Temp. range: -40 C to +121 C Couplings: GS-series and P-series Characteristics and benefits: Extremely flexible. Superior flex impulse perform ance: tested to 1000000 impulse cycles at 50% of EN 856 R12 and SAE 100R12 bend radii. 50% of EN 856 4SP bend radius. Compatibility: The hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids ID Code bore Min. burst Max. working Min. bend O.D radius Weight [kg/m] [inch] [psi] [bar] [psi] [bar] EFG4K-12 5102001130 3/4 19 30,7 16000 1120 4000 280 120 1,31 EFG4K-16 5102001140 1 25 38,1 16000 1120 4000 280 150 1,93 EFG4K-20 5102001150 1 1/4 31 47,0 16000 1120 4000 280 210 2,89 8

EFG5K 5000 psi constant TECHNICAL SPECIFICATION: Recommended: Extremely high and high impulse hydraulic applications. Tube: NBR: 08-20 CR.24-32 (Cloroprene). Reinforcement: -08-10-12-16: 4 alternating layers of spiralled, high tensile steel wire -20-24-32: 6 layers. Cover: CR (Chloroprene), MSHA Approval, available with abrasion resistant MegaTuff cover Temp. range: -40 C to +121 C Couplings: GS-series, GSM-series, P-series and I-series Compatibility: The hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids ID Code bore Min. burst Max. working Min. bend O.D radius Weight [kg/m] [inch] [psi] [bar] [psi] [bar] EFG5K-08 5102002100 1/2 12 23,9 20000 1400 5000 350 90 0,89 EFG5K-10 5102002110 5/8 16 28,2 20000 1400 5000 350 100 1,16 EFG5K-12 5102002120 3/4 19 32,0 20000 1400 5000 350 120 1,47 EFG5K-16 5102002130 1 25 38,9 20000 1400 5000 350 150 2,28 EFG5K-20 5102002140 1 1/4 31 50,0 20000 1400 5000 350 210 4,08 EFG5K-24 5102002150 1 1/2 38 57,4 20000 1400 5000 350 250 4,82 EFG5K-32 5102002160 2 51 71,1 20000 1400 5000 350 635 7,19 EFG6K 6000 psi constant TECHNICAL SPECIFICATION: Recommended: Extremely high and high impulse hydraulic applications such as hydrostatic transmissions, etc. Tube: NBR: 08-20 CR.24-32 (Cloroprene), MSHA Approval Reinforcement: Alternating layers of spiraled high tensile steel wire, 4 layers for -06 to -16, 6 layers for -20 to -32 Cover: CR (Chloroprene), MSHA Approval, available with abrasion resistant MegaTuff cover Temp. range: -40 C to +121 C Couplings: GS-series, GSM-series, P-series and I-series* Compatibility: The hose is compatible with biodegradable hydraulic fluids like synthetic esters, polyglycols and vegetable oils as well as petroleum-based fluids ID Code bore Min. burst Max. working Min. bend O.D radius Weight [kg/m] [inch] [psi] [bar] [psi] [bar] EFG6K-06 5102003100 3/8 10 20,3 24000 1680 6000 420 65 0,73 EFG6K-08 5102003110 1/2 12 23,9 24000 1680 6000 420 90 0,89 EFG6K-10 5102003120 5/8 16 28,2 24000 1680 6000 420 100 1,16 EFG6K-12 5102003130 3/4 19 32,0 24000 1680 6000 420 120 1,47 EFG6K-16 5102003140 1 25 38,9 24000 1680 6000 420 150 2,28 EFG6K-20 5102003150 1 1/4 31 50,0 24000 1680 6000 420 210 4,08 EFG6K-24 5102003160 1 1/2 38 57,4 24000 1680 6000 420 250 4,82 EFG6K-32 5102003170 2 51 71,1 24000 1680 6000 420 635 7,19 9

1PC PowerClean, 1 wire Non-skive, blue cover TECHNICAL SPECIFICATION: Recommended: Hot and cold water high- cleaning equipment For agricultural, sports, valet and maintenance applications. PowerClean is suitable for use in hospitals, swimming pools and other applications. Construction: NBR tube Blue NBR/PVC cover 1 wire braid reinforcement Temperature: -40 C +121 C Couplings: G-series and P-series ID Code bore Min. burst Max. working Min. bend O.D radius Weight [kg/m] [inch] [psi] [bar] [psi] [bar] 1PC-05B 5101005100 5/16 8 15,1 14400 993 3600 248 130 0,23 1PC-06B 5101005110 3/8 10 17,2 12000 827 3000 207 130 0,33 1PC-08B 5101005120 1/2 12 20,3 9300 641 2500 172 180 0,43 2PC, PowerClean TECHNICAL SPECIFICATION: Recommended: Hot and cold water high- cleaning equipment. For agricultural, sports, valet and maintenance service applications. Grey and blue PowerClean for use in hospitals, swimming pools and other applications. Not recommended for steam service. Tube/Cover: NBR (nitrile) based. Specially compounded for high water service. Reinforcement: 2 braids of high tensile steel wire Temperature: -40 C +121 C Standards: Gates proprietary Couplings: G-series and P-series ID Code bore Burst Max. working Min. bend O.D radius Weight [kg/m] inch DN [psi] [bar] [psi] [bar] 2PC-05B 5110003100 5/16 8 16,3 19200 1324 5000 345 130 0,40 2PC-06B 5110003110 3/8 10 18,8 19200 1324 5000 345 130 0,52 2PC-08B 5110003120 1/2 12 21,8 16000 1103 4000 276 180 0,62 10

R7 (SAE100 R7), thermoplastic 1P TECHNICAL SPECIFICATION: Recommended: Air,water and hydraulic oil lines Very flexible Construction: Polymer tube, polyester reinforcement Polymer cover Temperature: -40 C +100 C Couplings: P-series ID Code bore O.D. Min. burst Max. working [inch] [psi] [bar] [psi] [bar] Min. bend radius R7-04 5105001100 1/4 6,4 12,2 11000 770 2750 190 50 0,095 R7-06 5105001120 3/8 9,6 16,0 9000 630 2250 155 80 0,135 R7-08 5105001130 1/2 12,7 20,3 8000 560 2000 140 95 0,19 R7-10 5105001140 5/8 15,9 23,5 6000 420 1500 105 130 - R7-12 5105001150 3/4 19,0 26,5 5000 350 1250 87 185 0,26 R7-16 5105001160 1 25,0 32,5 4000 280 1000 70 230 0,30 Weight [kg/m] R7 (SAE100 R7), twin hose, thermoplastic 1PTW TECHNICAL SPECIFICATION: Recommended: Air,water and hydraulic oil lines Very flexible Construction: Polymer tube, polyester reinforcement Polymer cover Temperature: -40 C +100 C Couplings: P-series ID Code bore Min. burst Max. working Min. bend O.D. radius Weight [kg/m] [inch] [psi] [bar] [psi] bar] R7-04TW 5105001300 1/4 6,50 24,0 11000 758 2750 190 50 0,185 R7-06TW 5105001310 3/8 9,50 32,5 9000 620 2250 155 80 0,26 R7-08TW 5105001320 1/2 13 41,0 8000 552 2000 138 95 0,30 11

R8 (SAE100 R8), thermoplastic 1A TECHNICAL SPECIFICATION: Recommended: Air,water and hydraulic oil lines Very flexible Construction: Polymer tube, Kevlar reinforcement Polymer cover Temperature: -40 C +100 C Couplings: P-series ID Code bore Min. burst Max. working Min. bend O.D. radius Weight [kg/m] [inch] [psi] [bar] [psi] [bar] R8-04 5105002100 1/4 6,5 12,3 20300 1400 5075 350 50 0,095 R8-06 5105002110 3/8 9,5 16,7 16240 1120 4060 280 80 0,135 R8-08 5105002120 1/2 13 20,5 14210 980 3550 245 95 0,19 R8-12 5105002140 3/4 19 28,0 9430 650 2350 162 185 0,26 R8-16 5105002150 1 25 34,7 8270 570 2060 142 230 0,30 R8 (SAE100 R8), twin hose, thermoplastic 1ATW TECHNICAL SPECIFICATION: Recommended: Air,water and hydraulic oil lines Very flexible Construction: Polymer tube, Kevlar reinforcement Polymer cover Temperature: -40 C +100 C Couplings: P-series ID Code bore Min. burst Max. working Min. bend O.D. radius Weight [kg/m] [inch] [psi] [bar] [psi] [bar] R8-04TW 5105002300 1/4 6,50 25,0 20300 1400 5075 350 50 0,18 R8-06TW 5105002310 3/8 9,50 34,0 16240 1120 4060 280 80 0,23 R8-08TW 5105002320 1/2 13 41,0 14210 980 3550 245 95 0,30 12

375 (SAE 100 R8), Non-conductive TECHNICAL SPECIFICATION: Recommended: Hydraulic and lubricating oil lines - non conductive Construction: Hytrel / Polymer tube, with Kevlar reinforcement, fire resistant Polymer cover with Kevlar reinforcement Cover: Orange polyurethan Temperature: -40 C +100 C Couplings: P-series bore Min. burst Max. working Min. bend Weight ID Code O.D radius kgs. [inch] [psi] [bar] [psi] [bar] 100 m 375-04 5105003100 1/4 6,4 12,9 20000 1380 5000 345 50 0,095 375-06 5105003110 3/8 9,5 16,8 16000 1140 4000 280 80 0,135 375-08 5105003120 1/2 12,7 20,5 14000 966 3500 245 95 0,23 375-10 5105003130 5/8 16,0 24,5 11300 780 2830 195 130-375-12 5105003140 3/4 19,1 27,5 9000 631 2250 160 185 0,26 375-16 5105003150 1 25,1 34,7 8270 570 2060 140 230 0,36 T9, teflon hose smooth bore TECHNICAL SPECIFICATION: Recommended: Aggresive fluids and high temperature applications Construction: PTFE tube, stainless steel braid Temperature: -60 C +260 C Couplings: P-series ID Code bore Min. burst Max. working Min. bend O.D radius Weight [kg/m] [inch] [psi] [bar] [psi] [bar] T9-04 5105004100 1/4 6,5 9,4 11300 780 2800 195 75 0,11 T9-06 5105004110 3/8 10,3 13,6 8700 600 2200 150 75 0,20 T9-08 5105004120 1/2 13 16,5 8400 580 2100 145 135 0,24 T9-12 5105004130 3/4 19,8 23,5 5500 380 1400 95 210 0,37 T9-16 5105004140 1 24,7 28,0 4000 280 1000 70 260 0,44 13

Ferrules Coupling category GS-Hydro Size Design and preparation G series G3... -04 to -20 One-piece Non-skive GSP series GSP3... -24 and -32 Two-piece Non-skive GS series G5... -06 to -24 Two-piece Non-skive GSH series GSH5... -24 and -32 One-piece Non-skive P series 3... -04 to -32 Two-piece Non-skive / Skive I series 5... -12 to -32 Two-piece Interlock GSM GSM5... -24 to -32 One-piece Non-skive Ferrules for Gates wire braided hoses G-SERIES COUPLING P-SERIES COUPLING Ferrule Skiving Ferrule Skiving G1-04 1-PC non-skive 399-04 non-skive G1-05 1-PC non-skive 399-05 non-skive G1-06 1-PC non-skive 399-06 non-skive G1-08 1-PC non-skive 399-08 non-skive G1-10 1-PC non-skive 399-10 non-skive G1-12 1-PC non-skive 399-12 non-skive G1-16 1-PC non-skive 399-16 non-skive G1-20 1-PC non-skive 399-20 non-skive G1-24 GSP392-24 non-skive 399-24 non-skive G1-32 GSP392-32 non-skive 399-32 non-skive G2-04 1-PC non-skive 399-04 non-skive G2-05 1-PC non-skive 399-05 non-skive G2-06 1-PC non-skive 399-06 non-skive G2-08 1-PC non-skive 399-08 non-skive G2-10 1-PC non-skive 399-10 non-skive G2-12 1-PC non-skive 399-12 non-skive G2-16 1-PC non-skive 399-16 non-skive G2-20 1-PC non-skive 399-20 non-skive G2-24 GSP392-24 non-skive 399-24 non-skive G2-32 GSP392-32 non-skive 399-32 non-skive M3K-04 1-PC non-skive 393-04 non-skive M3K-05 1-PC non-skive 393-05 non-skive M3K-06 1-PC non-skive 393-06 non-skive M3K-08 1-PC non-skive 393-08 non-skive M3K-10 1-PC non-skive 399-10 non-skive M3K-12 1-PC non-skive 399-12 non-skive M3K-16 1-PC non-skive 399-16 non-skive M4K-04 1-PC non-skive 399-04 non-skive M4K-05 1-PC non-skive 399-05 non-skive M4K-06 1-PC non-skive 399-06 non-skive M4K-08 1-PC non-skive 399-08 non-skive M4K-10 1-PC non-skive 399-10 non-skive M4K-12 1-PC non-skive 399-12 non-skive M5K-04 1-PC non-skive 399-04 non-skive M5K-05 1-PC non-skive 399-05 non-skive M5K-06 1-PC non-skive 399-06 non-skive M5K-08 1-PC non-skive 399-08 non-skive M6K-04 1-PC non-skive 399-04 non-skive 1-PS: One-piece coupling, no seperate ferrule needed Skiving length and crimping diameter has to be chosen according to the lates version of the GSH crimping chart. 14

Ferrules Ferrules for Gates wire braided hoses G-SERIES COUPLING P-SERIES COUPLING Ferrule Skiving Ferrule Skiving C1TH-06 1-PC no-skive 399-06 no-skive C1TH-08 1-PC no-skive 399-08 no-skive C1TH-12 1-PC no-skive 399-12 no-skive C1TH-16 1-PC no-skive 399-16 no-skive C1TH-20 1-PC no-skive 381-20 outside CM2T-04 1-PC non-skive 399-04 non-skive CM2T-05 1-PC non-skive 399-05 non-skive CM2T-06 1-PC non-skive 399-06 non-skive CM2T-08 1-PC non-skive 399-08 non-skive CM2T-10 1-PC non-skive 399-10 non-skive CM2T-12 1-PC non-skive 399-12 non-skive CM2T-16 1-PC non-skive 399-16 non-skive Ferrules for Gates spiral hoses GS-SERIES COUPLING P-SERIES COUPLING P-SERIES COUPLING I-SERIES COUPLING Ferrule Skiving Ferrule Skiving Ferrule Skiving Ferrule Skiving EFG3K-20 G594-20 non-skive 384-20 outside EFG3K-24 GSP394-24 non-skive 384-24 outside EFG3K-32 GSP394-32 non-skive 384-32 outside EFG4K-12 G599-12 non-skive 396-12 non-skive 384-12 outside EFG4K-16 G599-16 non-skive 396-16 non-skive 384-16 outside EFG4K-20 G594-20 non-skive 384-20 outside EFG5K-08 G599-08 non-skive 396-08 non-skive 384-08 outside EFG5K-10 G599-10 non-skive 396-10 non-skive 384-10 outside EFG5K-12 G599-12 non-skive 396-12 non-skive 384-12 outside 594-12 in/outside EFG5K-16 G599-16 non-skive 396-16 non-skive 384-16 outside 594-16 in/outside EFG5K-20 G596-20 non-skive 596-20 in/outside EFG5K-24 1-PC non-skive 596-24 in/outside EFG5K-32 1-PC non-skive 596-32 in/outside EFG6K-06 G599-06 non-skive 396-06 non-skive 384-06 outside EFG6K-08 G599-08 non-skive 396-08 non-skive 384-08 outside EFG6K-10 G599-10 non-skive 396-10 non-skive 384-10 outside EFG6K-12 G599-12 non-skive 396-12 non-skive 384-12 outside 594-12 in/outside EFG6K-16 G599-16 non-skive 396-16 non-skive 384-16 outside 594-16 in/outside EFG6K-20 G596-20 non-skive 596-20 in/outside EFG6K-24 1-PC non-skive 596-24 in/outside EFG6K-32 1-PC non-skive Ferrules for Gates wire braided hoses G-SERIES COUPLING P-SERIES COUPLING Ferrule Skiving Ferrule Skiving 1PC-05B 1-PC non-skive 399-05 non-skive 1PC-06B 1-PC non-skive 399-06 non-skive 1PC-08B 1-PC non-skive 399-08 non-skive 2PC-05B 1-PC non-skive 399-05 non-skive 2PC-06B 1-PC non-skive 399-06 non-skive 2PC-08B 1-PC non-skive 399-08 non-skive 1-PS: One-piece coupling, no seperate ferrule needed Skiving length and crimping diameter has to be chosen according to the lates version of the GSH crimping chart. 15

Ferrules Ferrules for thermoplastic hoses and teflon hose G-SERIES COUPLING P-SERIES COUPLING Ferrule Skiving Ferrule Skiving R7-04 394-04 non-skive R7-06 394-06 non-skive R7-08 394-08 non-skive R7-10 394-10 non-skive R7-12 394-12 non-skive R7-16 394-16 non-skive R8-04 394-04 non-skive R8-06 394-06 non-skive R8-08 394-08 non-skive R8-12 394-12 non-skive R8-16 394-16 non-skive 375-04 394-04 non-skive 375-06 394-06 non-skive 375-08 394-08 non-skive 375-10 394-10 non-skive 375-12 394-12 non-skive 375-16 394-16 non-skive ID codes for ferrules dim. T9-04 395-04 non-skive T9-06 395-06 non-skive T9-08 395-08 non-skive T9-12 395-12 non-skive T9-16 395-16 non-skive 1-PS: One-piece coupling, no seperate ferrule needed Skiving length and crimping diameter has to be chosen according to the lates version of the GSH crimping chart. GSP392- GSP394- G594- G596- G599-384- 393-04 1/4 - - - - - 5203001400 5203001600 05 5/16 - - - - - 5203001410 5203001610 06 3/8 - - - - 5202001200 5203001420 5203001620 08 1/2 - - - - 5202001210 5203001430 5203001630 10 5/8 - - - - 5202001220 5203001440-12 3/4 - - - - 5202001230 5203001450-16 1 - - - - 5202001240 5203001460-20 1 1/4 - - 5202001000 5202001100-5203001470 - 24 1 1/2 5201012500 5201012000 - - 5202001260 5203001480-32 2 5201012510 5201012010 - - 5202001270 5203001490 - ID Code dim. 394-395- 396-398- 399-594- 596-04 1/4 5203001800 5203001200 5203002000-5203002400 - - 05 5/16 5203001810 5203001210 5203002010-5203002410 - - 06 3/8 5203001820 5203001220 5203002020-5203002420 - - 08 1/2 5203001830 5203001230 5203002030 5203002200 5203002430 - - 10 5/8 5203001840 5203001240 5203002040-5203002440 - - 12 3/4 5203001850 5203001250 5203002050-5203002450 5204006000 5204006200 16 1 5203001860 5203001260 5203002060-5203002460 5204006010 5204006210 20 1 1/4-5203001270 - - 5203002470 5204006020 5204006220 24 1 1/2-5203001280 - - 5203002480 5204006030 5204006230 32 2-5203001290 - - 5203002490 5204006040 5204006240 ID Code 16

GS-retain ring flange hose couplings L L Straight 90 H H L 45 Ferrule GS-hose coupling, straight GS-hose coupling, 90 Size ID Code L 3/4 12020G 5301001100 100 1 16020G 5301001420 111 1 1/4 20020G 5301001820 128 1 1/2 24020G 5301002220 134 2 32020G 5301002620 200 GS-hose coupling, 45 Size ID Code L H 3/4 12022G 5301040020 132 36 1 16022G 5301040500 152 38 1 1/4 20022G 5301040900 186 44 1 1/2 24022G 5301041220 200 52 2 32022G 5301041620 274 60 Ferrule Size ID Code L H 3/4 12021G 5301042020 115 69 1 16021G 5301042420 134 78 1 1/4 20021G 5301042820 137 88 1 1/2 24021G 5301043620 177 102 2 32021G 5301044020 254 126 Size ID Code D (after crimping) 3/4 G599-12 5202001230 37.4 37.8 1 G599-16 5202001240 44.3 44.7 1 1/4 G596-20 5202001100 56.2 56.6 1 1/2 G599-24 5202001260 63.3 63.7 2 integrated in hose couplings 76.6 78.1 Component material: Carbon steel, zinc plated 17

GS-retain ring flange hose couplings, I-Series L L Straight 90 H H L Type 594- Type 596-45 Ferrules GS-hose coupling, straight GS-hose coupling, 90 GS-hose coupling, 45 Size ID Code L 3/4 12020-IT 5301001105 44.2 1 16020-IT 5301001425 48.3 1 1/4 20020-IT 5301001825 82.3 1 1/2 24020-IT 5301002225 83.4 2 32020-IT 5301002625 96.9 Size ID Code L H 3/4 12021-IT 5301042025 59.2 64 1 16021-IT 5301042425 76.3 75 1 1/4 20021-IT 5301042825 95.1 93 1 1/2 24021-IT 5301043625 111.8 110 2 32021-IT 5301044025 149.5 140 Size ID Code L H 3/4 12022-IT 5301040025 72.2 32.0 1 16022-IT 5301040505 88.3 36.1 1 1/4 20022-IT 5301040905 112.1 43.8 1 1/2 24022-IT 5301041225 128.8 51.7 2 32022-IT 5301041625 166.4 65.9 Ferrules Type Size G5K/EFG5K G6K/EFG6K ID Code ID Code 3/4 594-12 5204006000 594-12 5204006000 1 594-16 5204006010 594-16 5204006010 1 1/4 596-20 5204006220 596-20 5204006220 1 1/2 596-24 5204006230 596-24 5204006230 2 596-32 5204006240 596-32 5204006240 Component material: Carbon steel, zinc plated 18

G-series one piece couplings/gsp-series two piece in -24 and -32 BSP 60 cone Ferrules: for 2-layer hose GSP39224 & GSP392232 for 4-layer hose GSP39424 & GSP39432 G301- Straight female G303-90º female G304-45º female G305-90º compact ID Code ID Code ID Code ID Code 02-04 1/8 1/4 5201001000 - - 5201001900 04-04 1/4 1/4 5201001010 5201001300 5201001600 5201001910 06-04 3/8 1/4 5201001020 5201001310 5201001610-04-06 1/4 3/8 - - - 5201001920 06-06 3/8 3/8 5201001030 5201001320 5201001620 5201001930 08-06 1/2 3/8 5201001040 5201001330 5201001630-06-08 3/8 1/2 5201001050 - - 5201001940 08-08 1/2 1/2 5201001060 5201001340 5201001640 5201001950 12-08 3/4 1/2 5201001070 - - 5201001960 10-10 5/8 5/8 5201001080 5201001350 5201001650 5201001970 12-10 3/4 5/8 5201001090 5201001360 5201001660 5201001980 12-12 3/4 3/4 5201001100 5201001370 5201001670 5201001990 16-16 1 1 5201001110 5201001380 5201001680 5201002000 20-20 1 1/4 1 1/4 5201001120 5201001390 5201001690-24-24* 1 1/2 1 1/2 5201001150 5201001420 5201001720-32-32* 2 2 5201001160 5201001430 5201001730 - *) Sizes -24 and -32 new design, two-piece coupling. starts with GSP3... instead of G3... for those couplings. BSP/NPT G302- Male parallel G920- Female flat face G310- Male taper G900- Banjo BSP G311- NPT Male ID Code ID Code ID Code ID Code ID Code 02-04 1/8 1/4 - - - 5201003800 04-04 1/4 1/4 5201003000-5201003330 5201003600 5201003810 06-04 3/8 1/4 5201003010-5201003340 5201003610 5201003820 04-06 1/4 3/8 - - - 5201003620 5201003830 06-06 3/8 3/8 5201003020 5201003300 5201003350 5201003630 5201003840 08-06 1/2 3/8 5201003030 5201003310 5201003360 5201003640 5201003850 06-08 3/8 1/2 5201003040-5201003370 - 5201003860 08-08 1/2 1/2 5201003050 5201003320 5201003380 5201003650 5201003870 12-08 3/4 1/2 - - - - 5201003880 10-10 5/8 5/8 5201003060-5201003390 - 5201003890 12-10 3/4 5/8 5201003070 - - - 5201003900 12-12 3/4 3/4 5201003080 5201003325 5201003400 5201003660 5201003910 16-16 1 1 5201003090-5201003410 - 5201003920 20-20 1 1/4 1 1/4 5201003100 - - - 5201003930 24-24* 1 1/2 1 1/2 5201003130 - - - 5201003960 32-32* 2 2 5201003140-5201003430 - 5201003970 *) Sizes -24 and -32 new design, two-piece coupling. starts with GSP3... instead of G3... for those couplings. 19

G-series one piece couplings/gsp-series two piece in -24 and -32 JIC 37 cone G313- Straight Female G316-90º Female G317-45º Female G314- Straight Male ID Code ID Code ID Code ID Code 07-04 7/16-20 1/4 5201005000 5201005300 5201005460 5201005900 08-04 1/2-20 1/4 5201005010 5201005310 5201005600 5201005910 09-04 9/16-18 1/4 5201005020 5201005320 5201005610 5201005920 09-06 9/16-18 3/8 5201005030 5201005330 5201005620 5201005930 12-06 3/4-16 3/8 5201005040 5201005340 5201005630 5201005940 12-08 3/4-16 1/2 5201005050 5201005350 5201005640 5201005950 14-08 7/8-14 1/2 5201005060 5201005360 5201005650 5201005960 14-10 7/8-14 5/8 5201005070 5201005370 5201005660 5201005970 17-10 1 1/16-12 5/8 5201005080 5201005380 5201005670 5201005980 17-12 1 1/16-12 3/4 5201005090 5201005390 5201005680 5201005990 19-12 1 3/16-12 3/4 5201005100 5201005400-5201006000 21-12 1 5/16-12 3/4 5201005110-5201005690 5201006010 21-16 1 5/16-12 1 5201005120 5201005410 5201005700 5201006020 26-16 1 5/8-12 1 5201005130 5201005420 5201005710 5201006030 26-20 1 5/8-12 1 1/4 5201005140 5201005430 5201005720 5201006040 30-24* 1 7/8-12 1 1/2 5201005170 5201005452 5201005750 5201006070 40-32* 2 1/2-12 2 5201005180 5201005454 5201005760 5201006080 *) Sizes -24 and -32 new design, two-piece coupling. starts with GSP3... instead of G3... for those couplings. DKOL/Metric L - Standpipe Pipe G320- Male straight G333- Female O-ring G334- G335- Female 90º O-ringFemale 45º O-ring G339- Standpipe ID Code ID Code ID Code ID Code ID Code 06-04 6 12 x 1,5 1/4 5201007000 5201007200 5201007400 5201007600 5201007800 08-04 8 14 x 1,5 1/4 5201007010 5201007210 5201007410 5201007610 5201007810 10-04 10 16 x 1,5 1/4 5201007020 5201007220 5201007420 5201007620 5201007820 10-06 10 16 x 1,5 3/8 5201007030 5201007230 5201007430 5201007630 5201007830 12-06 12 18 x 1,5 3/8 5201007040 5201007240 5201007440 5201007640 5201007840 15-08 15 22 x 1,5 1/2 5201007050 5201007250 5201007450 5201007650 5201007850 18-08 18 26 x 1,5 1/2 5201007060 5201007260 5201007460 5201007660-18-10 18 26 x 1,5 5/8 5201007070 5201007270 5201007470 5201007670 5201007860 22-12 22 30 x 2,0 3/4 5201007080 5201007280 5201007480 5201007680 5201007870 28-16 28 36 x 2,0 1 5201007090 5201007290 5201007490 5201007690-35-20 35 45 x 2,0 1 1/4 5201007100 5201007300 5201007500 5201007700-42-24* 42 52 x 2,0 1 1/2 5201007120 5201007320 5201007520 5201007720 - *) Sizes -24 and -32 new design, two-piece coupling. starts with GSP3... instead of G3... for those couplings. 20

G-series one piece couplings/gsp-series two piece in -24 and -32 DKOS/Metric S Pipe G323- Male straight G336- Female O-ring G337- Female 90º O-ring G338- Female 45º O-ring ID Code ID Code ID Code ID Code 06-04 6 14 x 1,5 1/4-5201008200 5201008500-08-04 8 16 x 1,5 1/4 5201008000 5201008210 5201008510 5201008700 10-04 10 18 x 1,5 1/4 5201008010 5201008220 5201008520 5201008710 10-06 10 18 x 1,5 3/8 5201008020 5201008230 5201008530 5201008720 12-06 12 20 x 1,5 3/8 5201008030 5201008240 5201008540 5201008730 14-06 14 22 x 1,5 3/8 5201008040 5201008250 5201008550 5201008740 16-06 16 24 x 1,5 3/8 - - - - 16-08 16 24 x 1,5 1/2 5201008050 5201008260 5201008560 5201008750 20-10 20 30 x 2,0 5/8 5201008060 5201008270 5201008570 5201008760 20-12 20 30 x 2,0 3/4 5201008070 5201008280 5201008580 5201008770 25-12 25 36 x 2,0 3/4 5201008080 5201008290 5201008590 5201008780 25-16 25 36 x 2,0 1 5201008090 5201008300 5201008600-30-16 30 42 x 2,0 1 5201008100 5201008310 5201008610 5201008790 38-20 38 52 x 2,0 1 1/4 5201008110 5201008320 5201008620 5201008800 38-24* 38 52 x 2,0 1 1/2-5201008340 5201008640 5201008820 *) Sizes -24 and -32 new design, two-piece coupling. starts with GSP3... instead of G3... for those couplings. SAE Code 61 3000 psi G343- Straight SAE G344-90º SAE Flange G345-45º SAE Flange 943- Splitflange ID Code ID Code ID Code ID Code 08-08 1/2 1/2 5201010000 5201010200-5207001000 12-12 3/4 3/4 5201010010 5201010210 5201010400 5207001010 16-12 1 3/4 5201010020 5201010220 5201010410 5207001020 16-16 1 1 5201010030 5201010230 5201010420 5207001030 20-16 1 1/4 1 5201010040 5201010240 5201010430 5207001040 20-20 1 1/4 1 1/4 5201010050 5201010250 5201010440 5207001050 24-20 1 1/2 1 1/4 5201010060 5201010260-5207001060 24-24* 1 1/2 1 1/2 5201010100 5201010300 5201010480 5207001070 32-24* 2 1 1/2 5201010110 5201010310 5201010490 5207001080 32-32* 2 2 5201010120 5201010320 5201010500 5207001090 *) Sizes -24 and -32 new design, two-piece coupling. starts with GSP3... instead of G3... for those couplings. 21

GL-series one piece couplings SAE Code 61 3000 psi Dim. Steel ID Code 32 32 2 2 5201011000 5201011200 5201011400 40 40 2 1/2 2 1/2 5201011010 5201011210 5201011410 48 40 3 2 1/2 5201011020 5201011220 5201011420 48 48 3 3 5201011030 5201011230 5201011430 56 56 3 1/2 3 1/2 5201011040 5201011240 5201011440 64 64 4 4 5201011050 5201011250 5201011450 GS-series two piece couplings and GSM-series one piece couplings Ferrules GL343- GL344- GL345- G594- G3K-G4K G596- G5K-G6K G599- G3K-G4K-G5K-G6K ID Code ID Code ID Code 06 3/8 - - 5202001200 08 1/2 - - 5202001210 10 5/8 - - 5202001220 12 3/4 - - 5202001230 16 1 - - 5202001240 20 1 1/4 5202001000 5202001100-24 1 1/2 - - 5202001260 32 2 - - 5202001270 22

GS-series two piece couplings and GSM-series one piece couplings BSP 60 cone G502- Male parallel G501- Female O-ring G503- Female 90º O-ring G504- Female 45º O-ring G511- NPT Male ID Code ID Code ID Code ID Code ID Code 06-06 3/8 3/8 5202002000 5202002070 5202002200 5202002400 5202002600 08-08 1/2 1/2 5202002010 5202002080 5202002210 5202002410 5202002610 10-10 5/8 5/8 5202002020 5202002090 5202002220 5202002420-12-12 3/4 3/4 5202002030 5202002100 5202002230 5202002430 5202002620 16-16 1 1 5202002040 5202002110 5202002240 5202002440 5202002630 20-20 1 1/4 1 1/4 5202002050 5202002120 5202002250 5202002450 5202002640 24-24* 1 1/2 1 1/2 5202002066 5202002150 5202002270 5202002470 5202002670 32-32* 2 2 5202002067 5202002160 - - 5202002680 *) Sizes -24 and -32 new design one piece coupling. starts with GSM5... instead of G5... for those couplings. JIC 37 cone G513- Female straight G514- Male straight G516- Female 90º G517- Female 45º ID Code ID Code ID Code ID Code 12-06 3/4-16 3/8 5202003000 5202003200 5202003400 5202003600 14-08 7/8-14 1/2 5202003010 5202003210 5202003410 5202003610 17-10 1 1/16-16 5/8 5202003020 5202003220 5202003420 5202003620 17-12 1 1/16-12 3/4 5202003030 5202003230 5202003430 5202003630 21-12 1 5/16-12 3/4 5202003040 5202003240 5202003440 5202003640 21-16 1 5/16-12 1 5202003050 5202003250 5202003450 5202003650 26-16 1 5/8-12 1 5202003060 5202003260 5202003460 5202003660 26-20 1 5/8-12 1 1/4 5202003070 5202003270 5202003470 5202003670 30-24* 1 7/8-12 1 1/2 5202003100 5202003300 5202003490 5202003690 40-32* 2 1/2-12 2 5202003110 5202003310 - - *) Sizes -24 and -32 new design one piece coupling. starts with GSM5... instead of G5... for those couplings 23

GS-series two piece couplings and GSM-series one piece couplings DKOS/Metric S Pipe G523- Male straight G536- Female O-ring G537- Female 90º O-ring G538- Female 45º O-ring ID Code ID Code ID Code ID Code 12-06 12 20 x 1,5 3/8 5202004000 5202004200 5202004400 5202004600 16-08 16 24 x 1,5 1/2 5202004010 5202004210 5202004410 5202004610 20-10 20 30 x 2 5/8 5202004020 5202004220 5202004420 5202004620 20-12 20 30 x 2 3/4 5202004030 5202004230 5202004430 5202004630 25-12 25 36 x 2 3/4 5202004040 5202004240 5202004440 5202004640 25-16 25 36 x 2 1 5202004050 5202004250 5202004450 5202004650 30-16 30 42 x 2 1 5202004060 5202004260 5202004460 5202004660 38-20 38 52 x 2 1 1/4 5202004070 5202004270 5202004470 5202004670 38-24* 38 52 x 2 1 1/2-5202004290 5202004500 5202004700 *) Sizes -24 and -32 new design one piece coupling. starts with GSM5... instead of G5... for those couplings. SAE Code 61 3000 psi G543- Straight SAE fl. G544-90º SAE fl. G545-45º SAE fl. 943- Split flange 945- Monoblock ID Code ID Code ID Code ID Code ID Code 08-08 1/2 5202005000 5202005200 5202005400 5207001000 5207003000 12-10 5/8 5202005010 5202005210 5202005410 - - 12-12 3/4 5202005020 5202005220 5202005420 5207001010 5207003010 16-12 3/4 5202005030 5202005230 5202005430 5207001020 5207003020 16-16 1 5202005040 5202005240 5202005440 5207001030 5207003030 20-16 1 5202005050 5202005250 5202005450 5207001040 5207003040 20-20 1 1/4 5202005060 5202005260 5202005460 5207001050 5207003050 24-20 1 1/4 5202005070 5202005270 5202005470 5207001060 5207003060 24-24 1 1/2 5202005080 5202005280 5202005480 5207001070 5207003070 32-24 1 1/2 5202005090 5202005290 5202005490 5207001080 5207003080 *) Sizes -24 and -32 new design one piece coupling. starts with GSM5... instead of G5... for those couplings. 24

GS-series two piece couplings and GSM-series one piece couplings SAE Code 62 6000 psi G546- Straight SAE fl. G547-90º SAE fl. G548-45º SAE fl. 944- Split flange 946- Monoblock ID Code ID Code ID Code ID Code ID Code 08-08 1/2 5202006000 5202006200 5202006400 5207002000 5207004000 12-10 5/8 5202006010 5202006210 5202006410 - - 12-12 3/4 5202006020 5202006220 5202006420 5207002010 5207004010 16-12 3/4 5202006030 5202006230 5202006430 5207002020 5207004020 16-16 1 5202006040 5202006240 5202006440 5207002030 5207004030 20-16 1 5202006050 5202006250 5202006450 5207002040 5207004040 20-20 1 1/4 5202006060 5202006260 5202006460 5207002050 5207004050 24-20 1 1/4 5202006070 5202006270 5202006470 5207002060 5207004060 24-24* 1 1/2 5202006110 5202006310 5202006510 5207002070 5207004070 32-24* 1 1/2 5202006130 5202006320 5202006520 5207002080 5207004080 32-32* 2 5202006140 5202006330 5202006530 5207002090 5207004090 24-32* 2 5202006120 - - - - *) Sizes -24 and -32 new design one piece coupling. starts with GSM5... instead of G5... for those couplings. Catepillar style O-ring flange G583- Straight SAE flange G586-22º SAE flange G587-30º SAE flange G585-45º SAE flange G588-60º SAE flange G589-67º SAE flange G584-90º SAE flange ID Code ID Code ID Code ID Code ID Code ID Code ID Code 12-12 3/4 3/4 5202007000 5202007200 5202007400 5202007600 - - - 12-12L 3/4 3/4 - - - - - - 5202008100 12-12S 3/4 3/4 - - - - - - 5202008110 16-12 1 3/4 5202007010 5202007210 5202007410 5202007610 5202007800 - - 16-12S 1 3/4 - - - - - - 5202008120 16-16 1 1 5202007020 5202007220 5202007420 5202007620 5202007810 5202008000-16-16S 1 1 - - - - - - 5202008140 16-16L 1 1 - - - - - - 5202008130 20-16 1 1/4 1 5202007030 5202007230 5202007430 5202007630 5202007820 5202008010 5202008150 20-20 1 1/4 1 1/4 5202007040 5202007240 5202007450 5202007640 5202007830 5202008020-20-20S 1 1/4 1 1/4 - - - - - - 5202008160 24-20 1 1/2 1 1/4 5202007050 5202007250 5202007440 5202007650 5202007840 5202008030-24-20S 1 1/2 1 1/4 - - - - - - 5202008170 24-24* 1 1/2 1 1/2 5202007090 - - 5202007690 - - 5202008200 32-24* 2 1 1/2 5202007100 - - 5202007700 - - - 32-32* 2 2 5202007110 - - 5202007710 - - 5202008210 *) Sizes -24 and -32 new design one piece coupling. starts with GSM5... instead of G5... for those couplings. Cat GSM-couplings on request. 25

GS-series two piece couplings and GSM-series one piece couplings Komatsu style SAE flange G553- Straight SAE flange G555-45º SAE flange G554-90º SAE flange ID Code ID Code ID Code 10-08 5/8 1/2 5202011000 - - 10-10 5/8 5/8 5202011010 5202011030 5202011100 10-12 5/8 3/4 5202011020-5202011110 ORFS/SAE J1453 G560- Male straight G561- Female straight G562- Female 45º G563- Female 90º G564- Female 135º ID Code ID Code ID Code ID Code ID Code 06-06S 11/16-12UN 3/8 - - - 5202009810-06-06L 11/16-12UN 3/8 - - - 5202009800-06-06 11/16-16UN 3/8 5202009000 5202009200 5202009500 - - 08-06 13/16-12UN 3/8-5202009210 5202009510 5202009820-08-08 13/16-16UN 1/2 5202009010 5202009220 5202009520 - - 08-08S 13/16-12UN 1/2 - - - 5202009830-10-08 1-14UNS 1/2-5202009230 5202009530 5202009840-12-08S 13/16-12UN 1/2 - - - 5202009880-12-08 13/16-12UN 1/2-5202009260 - - - 10-10 1-14UNS 5/8-5202009240 5202009540 5202009850-10-10L 1-14UNS 5/8 - - - 5202009860-10-12 1-14UNS 3/4-5202009250 - - - 10-12S 1-14UNS 3/4 - - - 5202009870-12-12S 13/16-12UN 3/4 - - - 5202009910-12-12 13/16 -UN 3/4 5202009020 5202009270 5202009550 5202009890-12-12L 13/16-12UN 3/4 - - - 5202009900-16-12S 17/16-12UN 3/4 - - - 5202009920-16-12 17/16-12UN 3/4 5202009030 5202009280 5202009560-5202010100 16-16S 17/16-12UN 1 - - - 5202009960-16-16 17/16-12UN 1 5202009040 5202009290 5202009570 5202009930-16-16L 17/16-12UN 1 - - - 5202009940-20-16S 1.11/16-12UN 1 - - - 5202009980-20-16 1.11/16-12UN 1-5202009300 5202009580 5202009970-20-20S 111/16-12UN 1 1/4 - - - 5202010010-20-20 111/16-12UN 1 1/4 5202009050 5202009310 5202009590 5202009990-20-20L 111/16-12UN 1 1/4 - - - 5202010000-24-20 2-12UN 1 1/4-5202009320 - 5202010020-24-24 2-12UN 1 1/2-5202009340* 5202009600 5202010020 - *) Size -24 new design one piece coupling. GSM561-24-24 26

P-series coupling (1-4 wire) BSP 60 cone 301- Straight female 303-90º female 304-45º female 305-90º compact 02-04 1/8 1/4 5203003000 5203003200 5203003500 5203003800 04-04 1/4 1/4 5203003010 5203003210 5203003510 5203003810 06-04 3/8 1/4 5203003020 5203003220 5203003520 5203003820 06-06 3/8 3/8 5203003040 5203003240 5203003540 5203003830 08-06 1/2 3/8 5203003050 5203003250 5203003550 5203003850 06-08 3/8 1/2 5203003060 5203003260 5203003560 5203003860 08-08 1/2 1/2 5203003070 5203003270 5203003570 5203003870 12-08 3/4 1/2 5203003080 5203003280 5203003580 5203003880 10-10 5/8 5/8 5203003090 5203003290 5203003590 5203003890 12-10 3/4 5/8 5203003100 5203003300 5203003600 5203003900 12-12 3/4 3/4 5203003110 5203003310 5203003610 5203003910 16-16 1 1 5203003120 5203003320 5203003620 5203003920 20-20 1 1/4 1 1/4 5203003130 5203003330 5203003630 5203003930 24-24 1 1/2 1 1/2 5203003140 5203003340 5203003640 5203003940 32-32 2 2 5203003150 5203003350 5203003650 5203003950 ID Code BSP 60 cone 302- Male parallel 307- Female O-ring 920- Female flat face 02-04 1/8 1/4 5203004100 5203004400 5203004700 04-04 1/4 1/4 5203004110 5203004410 5203004710 06-04 3/8 1/4 5203004120 5203004420 5203004720 04-06 1/4 3/8 5203004130 5203004430 5203004730 06-06 3/8 3/8 5203004140 5203004440 5203004740 08-06 1/2 3/8 5203004150 5203004450 5203004750 06-08 3/8 1/2 5203004160 5203004460 5203004760 08-08 1/2 1/2 5203004170 5203004470 5203004770 12-08 3/4 1/2 5203004180 5203004480 5203004780 10-10 5/8 5/8 5203004190 5203004490 5203004790 12-10 3/4 5/8 5203004200 5203004500 5203004800 12-12 3/4 3/4 5203004210 5203004510 5203004810 16-16 1 1 5203004220 5203004520 5203004820 20-20 1 1/4 1 1/4 5203004230 5203004530 5203004830 24-24 1 1/2 1 1/2 5203004240 5203004540 5203004840 32-32 2 2 5203004250 5203004550 5203004850 ID Code 27

P-series coupling (1-4 wire) BSP/NPT 310- Male Taper 900- Banjo BSP 311- NPT Male 02-04 1/8 1/4 5203005000 5203005300 5203005600 04-04 1/4 1/4 5203005010 5203005310 5203005610 06-04 3/8 1/4 5203005020 5203005320 5203005620 04-06 1/4 3/8 5203005030 5203005330 5203005630 06-06 3/8 3/8 5203005040 5203005340 5203005640 08-06 1/2 3/8 5203005050 5203005350 5203005650 06-08 3/8 1/2 5203005060 5203005360 5203005660 08-08 1/2 1/2 5203005070 5203005370 5203005670 12-08 3/4 1/2 5203005080 5203005380 5203005680 10-10 5/8 5/8 5203005090 5203005390 5203005690 12-10 3/4 5/8 5203005100 5203005400 5203005700 12-12 3/4 3/4 5203005110 5203005410 5203005710 16-16 1 1 5203005120 5203005420 5203005720 20-20 1 1/4 1 1/4 5203005130 5203005430 5203005730 24-24 1 1/2 1 1/2 5203005140 5203005440 5203005740 32-32 2 2 5203005150 5203005450 5203005750 ID Code JIC 37 cone 313- Straight Female 316-90º Female 317-45º Female 314- Straight Male 315- Fem. compact 90º 07-04 7/16-20 1/4 5203006000 5203006300 5203006600 5203006900 5203007200 08-04 1/2-20 1/4 5203006010 5203006310 5203006610 5203006910 5203007210 09-04 9/16-18 1/4 5203006020 5203006320 5203006620 5203006920 5203007220 09-06 9/16-18 3/8 5203006030 5203006330 5203006630 5203006930 5203007230 12-06 3/4-16 3/8 5203006040 5203006340 5203006640 5203006940 5203007240 12-08 3/4-16 1/2 5203006050 5203006350 5203006650 5203006950 5203007250 14-08 7/8-14 1/2 5203006060 5203006360 5203006660 5203006960 5203007260 14-10 7/8-14 5/8 5203006070 5203006370 5203006670 5203006970 5203007270 17-10 1 1/16-12 5/8 5203006080 5203006380 5203006680 5203006980 5203007280 17-12 1 1/16-12 3/4 5203006090 5203006390 5203006690 5203006990 5203007290 19-12 1 3/16-12 3/4 5203006100 5203006400 5203006700 5203007000 5203007300 21-12 1 5/16-12 3/4 5203006110 5203006410 5203006710 5203007010 5203007310 21-16 1 5/16-12 1 5203006120 5203006420 5203006720 5203007020 5203007320 26-16 1 5/8-12 1 5203006130 5203006430 5203006730 5203007030 5203007330 26-20 1 5/8-12 1 1/4 5203006140 5203006440 5203006740 5203007040 5203007340 30-24 1 7/8-12 1 1/2 5203006150 5203006450 5203006750 5203007050 5203007350 40-32 2 1/2-12 2 5203006160 5203006460 5203006760 5203007060 5203007360 ID Code 28

P-series coupling (1-4 wire) DKOL/Metric L 320- Male straight 333- Female O-ring 334- Female 90º O-ring 335- Female 45º O-ring Pipe 06-04 6 12x1,5 1/4 5203008000 5203008300 5203008600 5203008900 08-04 8 14x1,5 1/4 5203008010 5203008310 5203008610 5203008910 10-04 10 16x1,5 1/4 5203008020 5203008320 5203008620 5203008920 10-06 10 16x1,5 3/8 5203008030 5203008330 5203008630 5203008930 12-06 12 18x1,5 3/8 5203008040 5203008340 5203008640 5203008940 15-08 15 22x1,5 1/2 5203008050 5203008350 5203008650 5203008950 18-08 18 26x1,5 1/2 5203008060 5203008360 5203008660 5203008960 18-10 18 26x1,5 5/8 5203008070 5203008370 5203008670 5203008970 22-12 22 30x2,0 3/4 5203008080 5203008380 5203008680 5203008980 28-16 28 36x2,0 1 5203008090 5203008390 5203008690 5203008990 35-20 35 45x2,0 1 1/4 5203008100 5203008400 5203008700 5203009000 42-24 42 52x2,0 1 1/2 5203008110 5203008410 5203008710 5203009010 ID Code DKOS/Metric S 323- Male straight 336- Female O-ring 337- Female 90º O-ring 338- Female 45º O-ring Pipe 08-04 8 16 x 1,5 1/4 5203010000 5203010300 5203010600 5203010900 10-04 10 18 x 1,5 1/4 5203010010 5203010310 5203010610 5203010910 10-06 10 18 x 1,5 3/8 5203010020 5203010320 5203010620 5203010920 12-06 12 20 x 1,5 3/8 5203010030 5203010330 5203010630 5203010930 14-06 14 22 x 1,5 3/8 5203010040 5203010340 5203010640 5203010940 16-06 16 24 x 1,5 3/8 5203010050 5203010350 5203010650 5203010950 16-08 16 24 x 1,5 1/2 5203010060 5203010360 5203010660 5203010960 20-10 20 30 x 2,0 5/8 5203010070 5203010370 5203010670 5203010970 20-12 20 30 x 2,0 3/4 5203010080 5203010380 5203010680 5203010980 25-12 25 36 x 2,0 3/4 5203010090 5203010390 5203010690 5203010990 25-16 25 36 x 2,0 1 5203010100 5203010400 5203010700 5203011000 30-16 30 42 x 2,0 1 5203010110 5203010410 5203010710 5203011010 38-20 38 52 x 2,0 1 1/4 5203010120 5203010420 5203010720 5203011020 38-24 38 52 x 2,0 1 1/2 5203010130 5203010430 5203010730 5203011030 ID Code 29

P-series coupling (1-4 wire) Standpipe 339- Straight standpipe 326-90º standpipe 328-45º standpipe 06-04 6 1/4 5203017000 5203017500 5203018000 08-04 8 1/4 5203017010 5203017510 5203018010 10-04 10 1/4 5203017020 5203017520 5203018020 10-06 10 3/8 5203017030 5203017530 5203018030 12-06 12 3/8 5203017040 5203017540 5203018040 14-06 14 3/8 5203017050 5203017550 5203018050 15-06 15 3/8 5203017060 5203017560 5203018060 12-08 12 1/2 5203017070 5203017570 5203018070 15-08 15 1/2 5203017080 5203017580 5203018080 16-08 16 1/2 5203017090 5203017590 5203018090 18-08 18 1/2 5203017100 5203017600 5203018100 18-10 18 5/8 5203017110 5203017610 5203018110 20-10 20 5/8 5203017120 5203017620 5203018120 20-12 20 3/4 5203017130 5203017630 5203018130 22-12 22 3/4 5203017140 5203017640 5203018140 25-12 25 3/4 5203017150 5203017650 5203018150 25-16 25 1 5203017160 5203017660 5203018160 28-16 28 1 5203017170 5203017670 5203018170 30-16 30 1 5203017180 5203017680 5203018180 35-20 35 1 1/4 5203017190 5203017690 5203018190 38-20 38 1 1/4 5203017200 5203017700 5203018200 42-24 42 1 1/2 5203017210 5203017710 5203018210 ID Code 30

P-series coupling (1-4 wire) SAE Code 61 3000 psi 343- Straight SAE 344-90 SAE flange 345-45 SAE flange 943- splitflange 945- monoblock 08-08 1/2 1/2 5203012000 5203012400 5203012800 5207001000 5207003000 12-12 3/4 3/4 5203012010 5203012410 5203012810 5207001010 5207003010 16-12 1 3/4 5203012020 5203012420 5203012820 5207001020 5207003020 16-16 1 1 5203012030 5203012430 5203012830 5207001030 5207003030 20-16 1 1/4 1 5203012040 5203012440 5203012840 5207001040 5207003040 20-20 1 1/4 1 1/4 5203012050 5203012450 5203012850 5207001050 5207003050 24-20 1 1/2 1 1/4 5203012060 5203012460 5203012860 5207001060 5207003060 24-24 1 1/2 1 1/2 5203012070 5203012470 5203012870 5207001070 5207003070 32-24 2 1 1/2 5203012080 5203012480 5203012880 5207001080 5207003080 32-32 2 2 5203012090 5203012490 5203012890 5207001090 5207003090 SAE Code 62 6000 psi ID Code 346-347- 348-944- 946-08-08 1/2 1/2 5203012200 5203012600 5203013000 5207002000 5207004000 12-12 3/4 3/4 5203012210 5203012610 5203013010 5207002010 5207004010 16-12 1 3/4 5203012220 5203012620 5203013020 5207002020 5207004020 16-16 1 1 5203012230 5203012630 5203013030 5207002030 5207004030 20-16 1 1/4 1 5203012240 5203012640 5203013040 5207002040 5207004040 20-20 1 1/4 1 1/4 5203012250 5203012650 5203013050 5207002050 5207004050 24-20 1 1/2 1 1/4 5203012260 5203012660 5203013060 5207002060 5207004060 24-24 1 1/2 1 1/2 5203012270 5203012670 5203013070 5207002070 5207004070 32-24 2 1 1/2 5203012280 5203012680 5203013080 5207002080 5207004080 32-32 2 2 5203012290 5203012690 5203013090 5207002090 5207004090 31

P-seriess coupling (1-4 wire) JIS Komatsu Banjo Kobelco Kærcher 712- JIS Japanese 335- JIS Komatsu 324- Kobelco mm 330- Kærcher 901- Banjo mm 02-04 1/8 1/4 5203014000 - - - - 04-04 1/4 1/4 5203014010 - - - - 06-04 3/8 1/4 5203014020 - - - - 06-06 3/8 3/8 5203014030 - - - - 08-06 1/2 3/8 5203014040 - - - - 08-08 1/2 1/2 5203014050 - - - - 12-12 3/4 3/4 5203014060 - - - - 16-16 1 1 5203014070 - - - - 20-20 1 1/4 1 1/4 5203014080 - - - - 24-24 1 1/2 1 1/2 5203014090 - - - - 32-32 2 2 5203014100 - - - - 04-04 14 x 1,5 1/4-5203014200 - - - 06-06 18 x 1,5 3/8-5203014210 - - - 08-08 22 x 1,5 1/2-5203014220 - - - 12-12 30 x 1,5 3/4-5203014230 - - - 16-16 33 x 2,0 1-5203014240 - - - 02-04 10 x 1,0 1/4 - - - - 5203014500 04-04 12 x 1,5 1/4 - - - - 5203014510 05-04 14 x 1,5 1/4 - - - - 5203014520 06-06 16 x 1,5 3/8 - - - - 5203014530 08-06 18 x 1,5 3/8 - - - - 5203014540 08-08 18 x 1,5 1/2 - - - - 5203014550 14-04 22 x 1,5 1/4 - - - 5203014400-14-05 22 x 1,5 5/16 - - - 5203014410-14-06 22 x 1,5 3/8 - - - 5203014420-10-22 30 x 1,5 5/8 - - 5203014300 - - 12-28 36 x 1,5 3/4 - - 5203014310 - - 16-28 36 x 1,5 1 - - 5203014320 - - ID Code 32

P-series couplings ORFS/SAE J1453 360- ORFS Male 361- ORFS Female 362- ORFS 45º 363- ORFS 90º 04-04 9/16-18 1/4 5203015000 5203015300 5203015500 5203015700 06-04 11/16-16 1/4 5203015010 5203015310 5203015510 5203015710 06-05 11/16-16 5/16 5203015020 5203015320 5203015520 5203015720 06-06 11/16-16 3/8 5203015030 5203015330 5203015530 5203015730 08-06 13/16-16 3/8 5203015040 5203015340 5203015540 5203015740 08-08 13/16-16 1/2 5203015050 5203015350 5203015550 5203015750 10-08 1-14 1/2 5203015060 5203015360 5203015560 5203015760 10-10 1-14 5/8 5203015070 5203015370 5203015570 5203015770 12-10 1.3/16-12 5/8 5203015080 5203015380 5203015580 5203015780 12-12 1.3/16-12 3/4 5203015090 5203015390 5203015590 5203015790 16-12 1.7/16-12 3/4 5203015100 5203015400 5203015600 5203015800 16-16 1.7/16-12 1 5203015110 5203015410 5203015610 5203015810 ID Code I-series interlock couplings DKOS/Metric S 523- Male straight 536- Female O-ring 537- Female 90º O-ring 538- Female 45º O-ring Pipe 20-12 20 30 x 2 3/4 5204005000 5204005200 5204005400 5204005600 25-12 25 36 x 2 3/4 5204005010 5204005210 5204005410 5204005610 25-16 25 36 x 2 1 5204005020 5204005220 5204005420 5204005620 30-16 30 42 x 2 1 5204005030 5204005230 5204005430 5204005630 38-20 38 52 x 2 1 1/4 5204005040 5204005240 5204005440 5204005640 38-24 38 52 x 2 1 1/2 5204005050 5204005250 5204005450 5204005650 ID Code 33

I-series interlock couplings (4 6 spiral) SAE Code 61 3000 psi 543- Straight SAE fl. 544-90º SAE fl. 545-45º SAE fl. 943- Splitflange 945- Monoblock 12-12 3/4 3/4 5204001000 5204001200 5204001400 5207001010 5207003010 16-16 1 1 5204001010 5204001210 5204001410 5207001030 5207003030 20-16 1 1/4 1 5204001020 5204001220 5204001420 5207001040 5207003040 20-20 1 1/4 1 1/4 5204001030 5204001230 5204001430 5207001050 5207003050 24-20 1 1/2 1 1/4 5204001040 5204001240 5204001440 5207001060 5207003060 24-24 1 1/2 1 1/2 5204001050 5204001250 5204001450 5207001070 5207003070 32-24 2 1 1/2 5204001060 5204001260 5204001460 5207001080 5207003080 32-32 2 2 5204001070 5204001270 5204001470 5207001090 5207003090 24-32 1 1/2 2 5204001080 5204001280 5204001480 - - ID Code SAE Code 62 6000 psi 546- Straight SAE fl. 547-90º SAE flange 548-45º SAE flange 944- Splitflange 946- Monoblock 12-12 3/4 3/4 5204002000 5204002200 5204002400 5207002010 5207004010 16-16 1 1 5204002010 5204002210 5204002410 5207002030 5207004030 20-16 1 1/4 1 5204002020 5204002220 5204002420 5207002040 5207004040 20-20 1 1/4 1 1/4 5204002030 5204002230 5204002430 5207002050 5207004050 24-20 1 1/2 1 1/4 5204002040 5204002240 5204002440 5207002060 5207004060 24-24 1 1/2 1 1/2 5204002050 5204002250 5204002450 5207002070 5207004070 32-24 2 1 1/2 5204002060 5204002260 5204002460 5207002080 5207004080 32-32 2 2 5204002070 5204002270 5204002470 5207002090 5207004090 24-32 1 1/2 2 5204002080 5204002280 5204002480 - - ID Code 34

I-series interlock couplings (4 6 spiral) Ferrules BSP and NPT couplings 594-4-spiral ferrule 596-6-spiral ferrule 501- Female O-ring 503-90º Fem. O-ring 504-45º Fem. O-ring 511- NPT Male 12-12 3/4 3/4 5204006000 5204006200 5204003300 5204003500 5204003600 5204003800 16-16 1 1 5204006010 5204006210 5204003310 5204003510 5204003610 5204003810 20-20 1 1/4 1 1/4 5204006020 5204006220 5204003320 5204003520 5204003620 5204003820 24-24 1 1/2 1 1/2 5204006030 5204006230 5204003330 5204003530 5204003630 5204003830 32-32 2 2 5204006040 5204006240 5204003340 5204003540 5204003640 5204003840 ID Code JIC 37 cone 513- Female straight 514- Male straight 516- Female 90º 517- Female 45º 17-12 1 1/16-12 3/4 5204004000 5204004200 5204004400 5204004600 21-16 1 5/16-12 1 5204004010 5204004210 5204004410 5204004610 26-20 1 5/8-12 1 1/4 5204004020 5204004220 5204004420 5204004620 30-24 1 7/8-12 1 1/2 5204004030 5204004230 5204004430 5204004600 40-32 2 1/2-12 2 5204004040 5204004240 5204004440 5204004640 ID Code 35

Heat resistance, protection for hoses Pyrojacket Application: Pyrojacket is used to insulate and protect hoses, pipes/tubes and cables in demanding industrial environments. assemblies are protected in work situations that involve smelting, welding and casting/founding. The pyro material insulates very hot hoses and tubes/pipes, protecting workers from injuries. Material: The pyro product keeps its flexibility and insulating qualities both at extremely high and low temperatures. The Pyrojacket is excellent for usage in smelting plants and offshore. The protective hose protects hoses and cables against fire and heat, and may for a shorter period of time be exposed to melted metal and glass, holding temperatures up to 1650ºC. The hose s red silicone rubber cover reduces heat loss if high temperature mediums are transported inside the hose. TUBE: COVER: REINF: TEMP: Fibreglass Silicone Polyester -65 C + -1650 C Description Stand length I.D. 902016 Pyrojacket for 1/4 hose 30 m 16 902019 Pyrojacket for 3/8 hose 30 m 19 902025 Pyrojacket for 1/2 hose 30 m 25 902032 Pyrojacket for 3/4 hose 30 m 32 902041 Pyrojacket for 1 hose 30 m 41 902051 Pyrojacket for 1-1/4 hose 30 m 51 902064 Pyrojacket for 1-1/2 hose 30 m 64 902076 Pyrojacket for 2 hose 30 m 76 Silicone rubber end dip Application: Odourless non-toxic curing agent protective tape for hoses. Designed to coat Pyrojacket at the ends. Material: Unique liquid silicone rubber formulation utilizes a non-toxic, odour free curing agent, eliminating the need for costly ventilation systems during the curing process. Temperature: Silicone rubber end dip withstands a continuous operating temperature of 260 C. Maximum short term exposure is 1093 C. * 1 liter can ** 310 ml cartridge Description 902905 Silicone rubber end dip* 902906 Silicone rubber** 36

Heat resistance, protection for hoses Pyrotape Application: Protective tape for hoses. Material: Non-adhesive high bulk glass fiber tape withstands intense heat and flame and sheds molten splash immediately. Temperature: Pyrotape withstands continuous exposure to 500 F (260 C), up to 2000 F (1090 C) for 15-20 minutes, and up to 3000 F (1650 C) for 15-30 seconds Description Stand length 902901 Pyrotape 25 mm wide 15 m 902902 Pyrotape 51 mm wide 15 m Pyrosil Application: Protective tape for hoses. Prevents leakage. Material: A heat resistant silicone rubber tape. The tape forms a non-adhesive, self-bonding, self-curing, liquid-tight insulation barrier. Temperature: Pyrosil is designed to withstand continuous exposure to temperatures up to 475 F (246 C). Description Stand length 902903 Pyrosil tape 25 mm wide 11 m Silicaflex Application: Protective tape for hoses Material: A user friendly, non-expensive on-site installable tape. Silicaflex is an excellent solution to the most demanding tape challenges, which may appear at extremely high temperatures. Temperature: Suitable for use at 1800 F (982 C), and able to withstand short term exposure up to 3000 F (1650 C), Silicaflex tape sets the standard for flexibility and minimum lineal shrinkage under high heat conditions. Description Stand length 902904 Silicaflex tape 51 mm wide 45 m 37

Safe spirals, protection for hoses Safe spirals Safe-Spirals, plastic hose protectors, protect hydraulic and pneumatic hoses from deterioration, shocks and abrasion. They improve the visibility of hoses, thus preventing dangerous situations. The protective spirals are easy to install either before or after hose installation. Safe-Spirals are manufactured by direct compression of the raw material. Due to the manufacturing method the product has a more durable construction and rounded edgeswhich do not damage the hoses. Safe-Spirals are: resistant to acids, oils and solvents flexible UV protected made of HD PE plastic operative at temperature range -50 C +100 C. recyclable Nominal o.d. ø mm Nominal i.d. ø mm Wall v Pitch P Distance of hole x mm 10-24Hole dia z 24-28mm28-40 Recommended hose range of use (dia) 12 9,6 1,2 10,5 - - - 16 13,4 1,3 12 - - 13-18 20 10,0 20,0 20 - - 10-24 25 20,6 2,2 25 - - 24-28 32 27,0 2,5 30 - - 28-40 40 34,6 2,7 24 - - 35-45 50 43,2 3,4 30 - - 40-55 63 55,6 3,7 37 - - 55-62 75 66,2 4,4 42 35 10 60-70 90 80,2 4,9 45 35 10 70-90 110 99,0 5,5 50 35 10 80-105 140 127,0 6,5 55 35 10 102-150 38

Safe spirals, protection for hoses Spiral, plastic, black Description Pack. Weight per m [kg] 906012 12 / 9,6 mm 25 0,04 906016 16 / 13,4 mm 25 0,06 906020 20 / 16,0 mm 25 0,09 906025 25 / 20,6 mm 25 0,15 906032 32 / 27,0 mm 25 0,19 906040 40 / 34,6 mm 25 0,30 906050 50 / 43,2 mm 25 0,40 906063 63 / 55,6 mm 25 0,65 906075 75 / 66,2 mm 20 0,73 906090 90 / 80,2 mm 20 1,20 906110 110 / 99,0 mm 15 1,76 906140 140 / 127 mm 10 2,50 Spiral, plastic, yellow Description Pack. Weight per m [kg] 907012 12 / 9,6 mm 25 0,04 907016 16 / 13,4 mm 25 0,06 907020 20 / 16,0 mm 25 0,09 907025 25 / 20,6 mm 25 0,15 907032 32 / 27,0 mm 25 0,19 907040 40 / 34,6 mm 25 0,30 907050 50 / 43,2 mm 25 0,40 907063 63 / 55,6 mm 25 0,65 907075 75 / 66,2 mm 20 0,73 907090 90 / 80,2 mm 20 1,20 907110 110 / 99,0 mm 15 1,76 907140 140 / 127 mm 10 2,50 Safe tool, mounting tool for safe spirals Description 906001 20-50 mm 906002 63-140 mm Safe tool, mounting instructions Start by rotating the spiral 1-2 rounds onto the hose / hose bundle (if the spiral is long it is better to start from the middle). Lift the spiral on top of the pin, the pin towards the mounting direction. Holding spring follows the hose. Turn the tool by its handle. 39

size selection nomogram To determine the recommended hose assembly size where the flow rate is known, lay a straight edge across the three colums so that the edge registers with the flow rate figure in the left hand scale, and the recommended velocity range in the right hand scale. The point at which the straight edge intersects the centre scale indicates the recommended hose bore size. be adjusted up or down, within the recommended velocity range, until the straight edge registers with a standard bore size in the centre scale. Example: Where flow rate is 100 litres per minute and recommended flow velocity is 4.5 metres per second a 25 mm (1 inch) bore size hose assembly is indicated. Should this reading not coincide with a standard hose assembly bore size, the right hand edge of the straight edge may Flow Litres per minute Imp. gallons per minute Flow velocity Bore Centimeters Bore Inches Metres/sec. Feet/sec. Note: Flow velocities in range A are recommended for suction and return lines. Flow velocities in range B are recommended for delivery lines. 40

Pressure drop in hoses The drop in hoses is determined based on the following information: type of application, fluid type and viscosity (at desired temperature), fluid temperature, fluid flow rate, hose size and length, number and type of fittings. The following graph will help you to determine the amount of drop. Imperial gallons per minute Pressure loss in millibars per metre Pressure loss in PSI per metre Litres per minute Based on: fluid viscosity 20 cst specific gravity 0.875 41

Bending radius theory for hoses α When a hose is bent between two points, it should not bend more than its minimum bend radius, under given maximum working. When hose is used beyond specified recommendations, unnecessary strain on the reinforcement and/or hose / coupling interface will shorten assembly life. Minimum bend radius for steel reinforced hose is determined under impulse testing and is specified on GS data sheet for each hose type. To identify the hose length necessary to respect the minimum d OD L = ( R + ) π x 2 x α +2S 2 360 where L = hose length R = bend radius, in mm d OD = outside diameter, in mm α = bend angle S = straight hose portion on coupling 42

GS-Hydro is the original provider of non-welded piping solutions with numerous benefits for a wide variety of demanding applications. We create value together with our customers by providing innovative fluid transfer solutions which enable safe operation, reduced environmental impact and lower total cost of ownership. We deliver our piping and hose solutions globally in more than twenty-five countries through own companies and partners. GS-Hydro system offering 8990306609 Product Offering Gates s & Carbon steel Couplings, September 2016 GS-Hydro sales@gshydro.com www.gshydro.com leak-free reliable highest level of cleanliness small space requirement prefabrication fast and easy on-site installation zero-fire hazard