No: 882089 En Revision 2.0 202.0 Parts List MAJOR MSHA 80.08 www.grindex.com 2 3 5 6 7 8 9 0 7 8 9 2 3 5 6 2 3 5 6 7 8 9 50 5 52 53 20 2 22 23 2 25 26 27 28 29 30 5 55 56 57 58 59 60 6 62 63 500 3 32 33 3 35 H 6 65 66 N 67 36 68 69 600 37 70 38 39 7 0 72 2000A_803_80_08_expl_view
Parts List MAJOR MSHA 80.08 Overview Table of Contents This publication contains the following topics: Topic Introduction... Practical Information... 5 Data Plate Interpretation... 6 Order parts... 7 Spare Parts... 8 Parts List, MAJOR MSHA 80.08 3
Introduction Purpose The purpose of this manual is to give the reader information about available spare parts and accessories for the product. Recipient The manual is principally intended for Grindex customers service personnel sales personnel Contact For more information contact your Grindex representative visit http://www.grindex.com/ Reference More information about the product is available in the following documents: Installation, Operation and Maintenance Grindex accessories list Parts List, MAJOR MSHA 80.08
Practical Information Overview Table of Contents This chapter contains the following topics: Topic Data Plate Interpretation... 6 Data Plate... 6 Order parts... 7 Parts List, MAJOR MSHA 80.08 5
Data Plate Interpretation Introduction The Grindex product is always provided with data plates: The general data plate is used on all products. The approval plate is added to all explosion proof products. Data Plate The product may only be operated within the parameters stated on the data plate. Illustration This is an illustration of a general data plate. Field description This table shows the fields on the general data plate, and which information each field contains. Field Description Field Description Pump type number Degree of protection 2 Frequency 2 Maximum capacity 3 Phases, type of current 3 Rated current Rated shaft power Direction of the start reaction 5 Thermal class 5 Direction of the impeller rotation 6 Locked rotor code-letter 6 Maximum head 7 Country of origin 7 Serial number 8 Maximum power consumption 8 Rated voltage 9 Product weight 9 Pump model 0 Maximum submersion depth - - 6 Parts List, MAJOR MSHA 80.08
Order parts Order When ordering spare parts, state product number and serial number of the product, spare part number and quantity. Requirements Genuine Grindex parts must always be used for repairs if the product is to fulfill requirements and obtain official approval. Specially Approved Products Spare parts marked with (EX) after the part number are subject to dimensional accuracy inspection. Parts List,MAJOR MSHA 80.08 7
Spare Parts NOTE! Parts with position numbers that end with.9xx are NOT included in the unit and must be ordered separately. Pos. No Part. No Denomination 0 533 Hexagon flange screw M8X0-A2-70 2 5 9 00 Lifting handle 3 0 535 Hex.socket hd screw M0X20-A2-70 50 30 00 Lock washer A2-0 5 536800(EX) Glandscrew 6 33 023 Seal sleeve (20)-22 MM 6 50 03 0 Seal sleeve (22)-2 MM 7 50 926 05 Cable clip (20)-22 MM 7 50 926 08 Cable clip (22)-2 MM 8 50 27 00 Plain washer (2)-26 MM 8 50 27 0 Plain washer (0)-22 MM 9 0 52 Cable tie 200X.8 0 0 069 Motor cable 0AWG/3-2--GC OD=20-22MM 0.90 32 35 Insulating hose (8-22MM) * 0.902 0 503 Hex.socket hd screw M6X2-A2-70 0.903 0 77 Cable lug INSUL.UL/CSA 2.62-6.6MM2 0 002 Hexagon head screw M8X30-A-70 2 0 538 Lock washer 37A-8-A2 3 5 36 00 (EX) Cover 30 93 O-ring 39.3X5.7 NBR 5 0 050 Hex.socket hd screw M8X30-A2-70 6 0 538 Lock washer 37A-8-A2 8 7 50 022 22 Hexagon nut M0-A-70 2 8 50 022 26 Plain washer 0-A-70 2 9 3 569 Discharge connection DN 00 HOSE " 9 32 78 Discharge connection DN 75 HOSE 3" 9 50 87 02 Discharge connection DN 00 NPT -8 OUTER 9 50 39 00 Discharge connection DN 75 NPT 3-8 OUTER Qty/Version 08 * 8 8 Parts List, MAJOR MSHA 80.08
Pos. No Part. No Denomination 20 3 656 O-ring 0,X5,3 NBR 2 0 69 Stud 0X35-A2-70 2 22 0 000 Drive screw X5-A2-70 23 50 888 00 Plate-blank Use 50 907 0 as spare part. 2 50 836 00 Air release valve 25 5 363 00 (EX) Main cover 26 50 899 00 Connection plate Ordered separately. 26 5 37 00 Connection plate 3-phase Y, D. 27 32 5 O-ring 259.3X5.7 NBR 28 50 858 00 Cooling jacket 29 0 75 Terminal block 600V/65A UL/CSA 30 0 76 Tension pin 2 3 0 503 Hex.socket hd screw M6X2-A2-70 32 0 77 Cable lug INSUL.UL/CSA 2.62-6.6MM2 33 50 037 8 O-ring 89.5X3 NBR 3 0 020 O-ring 27.0X.0 NBR 35 50 99 0 (EX) Stator housing 36 0 02 O-ring 92.0X.0 NBR 37 50 980 3 Stator 5--2b 3-phase 0V-80V Y. 37 50 980 5 Stator 5--2b 3-phase 575V-600V Y. 38 0 023 O-ring 52.5X3.0 FPM 39 50 287 0 Ball bearing 630-2Z/C3WT 20X52X5 0 5 0 0 (EX) Shaft unit 50 950 0 (EX) Bearing housing 2 0 03 Ball bearing 330A- 2Z/C3VT3 3 0 08 O-ring 29.5X3 NBR 50 987 00 Seal ring 5 0 377 O-ring.5X3.0 NBR 6 33 063 Inspection screw 3 7 33 06 O-ring 9.2X3 NBR 3 8 50 95 00 (EX) Adapter 9 0 533 Hexagon flange screw M8X0-A2-70 50 0 538 Lock washer 37A-8-A2 5 0 533 Hexagon flange screw M8X0-A2-70 52 50 90 23 Mechanical seal Qty/Version 08 2 3 Parts List, MAJOR MSHA 80.08 9
Pos. No Part. No Denomination 53 0 083 O-ring 57.5X3.0 FPM 5 0 0 Pressure equalizer 55 0 02 O-ring 92.0X.0 NBR 56 50 952 00 Seal housing cov.coa H. 56 50 953 00 Seal housing cov.coa N. 57 50 020 0 Hex.socket hd screw M6X20-A-70 58 50 97 00 Sleeve 59 50 93 00 Adjustment screw 60 50 958 00 Impeller H. 60 50 960 0 Impeller N. 6 50 02 38 Plain washer 8-A-70 62 0 006 Hexagon head screw M8X60-A-80 63 50 95 00 Diffuser coat. H. 63 50 955 00 Diffuser coat. N. 6 50 022 26 Plain washer 0-A-70 65 0 007 Hexagon head screw M0X90-A-80 66 0 09 O-ring 59.3X5.7 NBR N. 66 50 037 5 O-ring 8.3X5.7 NBR H. 67 50 956 00 Suction cover H. 67 50 957 00 Suction cover N. 68 50 022 26 Plain washer 0-A-70 69 0 00 Hexagon head screw M0X30-A2-70 70 50 962 00 Damper complete 7 50 96 00 Strainer 72 50 02 37 Hexagon nut M8-A-70 73 0 7 O-ring 5.29X.78 NBR 7 50 278 02 Retaining ring SGA 20 500 5 39 00 O-ring kit Contains all pos. numbered O-rings. 600 5 378 00 Basic repair kit 80 5 325 00 Zinc anode set * Quantity per meter Qty/Version 08 0 Parts List, MAJOR MSHA 80.08
Grindex AB Box 7025 SE-7 07 Sundbyberg Sweden Tel +6 8 606 66 00 Fax +6 8 75 53 28 marketing@grindex.com Grindex AB. The original instruction is in English. All non-english instructions are translations of the original instruction.