Hand-operated Hydraulic Control Valve 4- way 2-position 4 Ports

Similar documents
MONOBLOCK DIRECTIONAL CONTROL VALVES

PRODUCT INFORMATION FAQ s

Auxiliary valves. Lever. Spool positioner Check valve Spool

General Valve Assembly Information

GPM Hydraulic Consulting, Inc. P.O. Box 689. Social Circle, GA Hydraulic Consulting, Inc

Available manual, pneumatic, and hydraulic spool control kits.

MP18/SIC & SIO Stacking Valve System Technical Information Manual

MP18 Stacking Valve System Technical Information Manual

4-Way Directional Control With Pressure Compensated Flow Control PSDCF120M64LF Specifications:

LOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS

and RD5000 or by the Utility section in the Series 20 valves. 7. The internal pilot pressure is used to initiate the spool shift when a solenoid is en

Module 5: Valves. CDX Diesel Hydraulics. Terms and Definitions. Categories of Valves. Types of Pressure Control Valves

Note: For use with hydraulic fluids other than those listed above, please consult Yuken representative in advance.

DC Series. 4-Way Directional Control Valve With Or Without Flow Control PDC16T4PBS PDCF16TM454LF

SECTIONAL BODY. Model SV. Directional Control Valves VALVES STANDARD FEATURES SPECIFICATIONS. Parallel or Series Circuit Construction ...

5-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow, for two pumps systems

LOGIC POPPET VALVES AND CARTRIDGE MANIFOLD SYSTEMS

PACKED SPOOL 4-WAY DIRECTIONAL CONTROL VALVE.

Sectional Directional Control Valve RSQ 240

4/2 servo solenoid valves with on-board electronics (OBE), positive overlap and position feedback

3-Way heavy duty flow control, with pressure compensated, solenoid and load sensing controlled priority flow

Section 6.1. Implement Circuit - General System. General: TF Configuration TB Configurations Implement Control Valve:

STC Solenoid Valve List Price

2005 FIRST Pneumatic Manual

RA / Pressure Reducing Valve, Pilot Operated Model DR (Series 5X) Ordering code 1/ PSI (350 bar) GPM (400 L/min)

CS-SCB Sander Control Block Manual

Manual Lever Handle Air Valves READ ONLINE

Mini 1. Compact High Flow 3-Way and 4-Way Pneumatic Directional Control Valves

LOAD SENSE SECTIONS. Series 20. Directional Control Valves NEED NEW PIC VALVES STANDARD FEATURES SPECIFICATIONS

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow

Proportional Directional Control Cartridge Valves: PSV10-34 & PSV12-34

3-Way heavy duty flow control, with pressure compensated and solenoid controlled priority flow

6 to14/2 ways/positions bankable flow diverters flangeable

Compact Hydraulics. Compact Hydraulics GoTo Europe

6 to14/2 ways/positions bankable flow diverters flangeable

Nominal sizes 08 to 10, special cavities

Slip-in Cartridge Valves Series CE, CP. General Description. Features. Pilot Control for Directional Functions

VALVES HYDRAULIC SOLUTION SPECIALISTS DISCLAIMER

TECHNICAL PAPER 1002 FT. WORTH, TEXAS REPORT X ORDER

NB: models, Codes and Specifications may be subject to change without notice. SECTION A DIRECTIONAL CONTROL VALVES MANUAL DIRECTIONAL VALVES

4-Way Directional Control Valve With Hydraulic Kick Out

HYDRAULICS VINCKE INDUSTRIAL HYDRAULIC VALVES

6/2 ways/positions flow diverters

Servo solenoid valves with on-board electronics (OBE)

Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI

Service and Parts Manual. Minimum Filtration Required:

CLS180 Proportional Load Sensing Mobile Valve

Industrial Hydraulic Valves. Directional Control, Pressure Control, Sandwich, Subplates & Manifolds, Accessories. Catalog HY /US

Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO. LPM/GPM BAR/PSI

Check Valves Check Valves are the simplest form of directional control valves, but they can also be used as pressure controls.

Section 6.1. Implement Circuit - General System. General: TF Configuration TB Configurations Implement Control Valve:

MF100BH (BASIC HYDRAULICS TRAINER) PARTS LIST CATALOG APRIL 2013

6/2 ways/positions flow diverters

VINCKE INDUSTRIAL HYDRAULIC VALVES INTRODUCTION

Manual Proportional Directional Control Valve (with Pressure Compensation, Multiple Valve Series)

Pneumatic Manual 2008

6 to14/2 ways/positions bankable flow diverters flangeable

HY-SPEC CATALOGUE - HYDRAULIC VALVES. Hydraulic Valves. Visit our website Catalogue

Lesson 5: Directional Control Valves

Chapter 10: Valves for Pipe Mounting

SV SOLENOID OPERATED

Série D3 Válvula Direcional CETOP 5 e NG 10. Catálogo HY /US

«Standard» Hydraulic power unit BM

SECTIONAL BODY. Series 20. Directional Control Valves STANDARD FEATURES SPECIFICATIONS VALVES. Pressure Rating

CLS100 Proportional Load Sensing Mobile Valve

Monoblock Directional Control Valve PMB22TSTSAB PMB23TSTSTSLB PMB21TDLB

29 158/ Proportional Pressure Relief Valve Models DBE and ZDBE, Series 1X. Ordering code DBE 6 1X G24 1/ PSI (315 bar)

Proportional Pressure Reducing Valves Series PE*W (Parker), R4R (Denison)

Directional Control Valve CV550

29 160/ Proportional Pressure Relief Valve Model DBE, (Series 5X) Ordering Code DBE 5X Y G24 1/ PSI (350 bar)

6 to 12/2 ways/positions bankable flow diverters flangeable

SR1A-A2. Functional Description HA /2012. Directly Operated Pressure Relief Valves. Replaces HA /2010. Screw-in cartridge design

Series SY3000/5000/7000

Solutions. ydraulics. We Manufacture. H y d r a u l i c s. Eaton Directional Control Valves. h y d r a u l i c s. Models and 31930

Explosion protected hydraulic products. Product overview industrial and mobile hydraulics

6/2 ways/positions flow diverters L (VS120-VS125-VS129)

6/2 ways/positions flow diverters

G & J SERIES HIGH FLOW SPOOL VALVES

4/2 servo solenoid valves with positive overlap and position feedback (Lvdt AC/AC)

MDG Mobile Directional Valve Build Kit. MDG for Mobile Equipment Flows to 60 I/min (15.8 US gpm)

Electrically operated valves Series MF-04 for manifold mounting, 5/2- and 5/3-way G1/8 360 Nl/min (0.366 Cv)

USA Headquarters. Dynex/Rivett Inc. 770 Capitol Drive Pewaukee, WI U.S.A. Tel: FAX:

DEL HYDRAULICS AIR CONTROL CATALOG

DMH085** Series will be available January 1, Catalog HY /US SERIES CAVITY DESCRIPTION FLOW PRESSURE PAGE NO.

PILOT OPERATED PRESSURE REDUCING VALVE TYPE DR

6/2 ways/positions flow diverters L (VS151-VS152-VS155)

SERIES Waterman* DESCRIPTION FLOW PRESSURE PAGE NO.

N1-DP N2-DP. External Pilot

Cartridge Valves Technical Information. Spreader Valves. Spreader Valves SCHEMATIC MODEL PRESSURE FLOW* WEIGHT SPR-2FFL12 SPR-2FFLC12 SPR-2FFLW86

Pressure Control Valves Series R. General Description. Specifications. Flow Data

Section 35 Chapter 9

Sectional Directional Control Valve RS 220

Post-Compensated Proportional Valve CV2000LS

High performance pneumatic valve system 02 Directional Control Valves

Series SY3000/5000/7000

Proportional pressure reducing valve, pilot operated, with on-board electronics (OBE) and position feedback

Servo solenoid valves with on-board electronics (OBE)

V Series AXIAL PISTON PUMP ORDER CODE

Section 6.1. Implement Circuit - General System. General: TF Configuration TB Configurations Implement Control Valve:

Mechanically actuated valves

Transcription:

Hand-operated Hydraulic Control Valve 4- way 2-position 4 Ports Hydraulic Directional Valve P40 2 Spool 4 Way 3 Position Chief 220907. $137.00 Prince Hydraulic Compensated Flow Control RD-175-30 3/4" Port 0-30GPM. Directional control hydraulic valves are the most universally applied products for Hydraulics Application: Directional poppet valves, direct operated and 10, Porting pattern to DIN 24340 form A and ISO 4401, Leak-free isolation of closed port Hydraulics Application: Directional spool valves, 4/2- and 4/3- way directional. Manual Air Control Valve, 4-Way, 3-Position, Pipe Size 1/2 In., Actuator/Return Rotary Lever/Manual..More. Price $279.00 / each. Typically in Stock. Home _ Products _ Solenoid Operated Valves _ Spool Solenoid Operated _ Spool 4-Way 2- Position 4-Way,2-Position. ES-08W-4A-10-Z-04, 11, 350, 08W-4. Pilot-operated directional and proportional flow control cartridges offer multiple Sun pilot shifted 3- and 4-way directional valves can be used in hydraulic Spring Centered 4-way, 3-position Directional Cartridges, Spring Biased 3-way, 2-position 5000 psi (350 bar) at all work ports, and 500 psi (35 bar) at the pilot ports. Brevini Hydraulics Product Line: Proportional directional valves, joysticks and electronic modules. 2353 PORTS 6 MANUAL AND PNEUMATIC OPERATED VALVES (page 61) SOLENOID VALVES 4 WAY 2 POSITIONS 13 HAND PUMPS (page 107) PRESSURE COMPENSATED FLOW CONTROL VALVES. Hand-operated Hydraulic Control Valve 4-way 2- position 4 Ports >>>CLICK HERE<<< This Northman industrial 4-way valve is commonly used to extend and retract a its home all-ports blocked position until shifted to one of 2 positions to either extend or Hydraulic directional control valve, Spring offset, Hand-lever operated. Quick-Exhaust Valves/ Inlet Port Size: 1/4/ Exhaust Port Size: 3/8/ Minimum PSI: 7.1/ Hydraulic Control Valves/ Type: Hydraulic Control Valves/ GPM: 40.00/ "Manually Operated Valves/ Valve Type: 4-Way, 2 Position, bottom ported/. 1/4. VEDS-08A-42. OD.14 - X - 58 - Y - 00. Solenoid operated valves direct acting spool 4-way 2- Hydraulic. Max. operating pressure port 2-

3-4 bar (psi) 315 (4568) 2/4. Bosch Rexroth Oil Control S.p.A. OD14X58Y00 RE 18324-51/12.14. Flow Control Valves Based on ISO 1219-1 and 2 The valve shown is a 4 way two position valve. The '4 way' means it has 4 pipe connections, generally Pressure, Return, Port A are operated the spool position moves to either the right or left hand position. Hydraulic valves can be activated by in many different ways. and capacity, type of control (hand, foot, solenoid or pilot valve) all must NPT Port Size: 2 = 1/4" 6 = 3/4". 3 = 3/8" 8 = 1". 4 = 1/2" 4-wAy, 3-POSitiON Air AND HyDrAuliC VAlVeS and Foot-Operated Valves, so well known throughout. 2. QUICK INDEX. VALVES/ACTUATORS. Section. Page. Two-Way Valves all pneumatic, and for many low pressure hydraulic directional control applications VALVE SIZE. PORT NAME. 1/8. 1/4. 3/8. 1/2. 3/4. 1. 1-1/4 (sideported) 1-1/4 (subplate mounting) B Spring Centering (for 3 position manually operated valves). Ltd. Australian manufacturer of hydraulic control valves, hydraulic manifolds and stockist Flow Control Valves, 2-Way Proportional Directional Valves, 3-Port with Load Manually Operated Valves Manual Rotary Valve, 4-Way, 2-Position. hydraulic or hydraulic proportional and integral hand levers for manual override Neutral position: 110 N 2 Main relief valve. TB12. 3 Bypass flow control spool unit. TK517. 4 Plug. PE20. 1. 4. 3 With cavities for service port valves and for solenoid operated The electrical unloading valve is a 2-way, normally open. Allows the operator to manually actuate a solenoid valve with a push style tube Spool-type valves are available in 2-way 2-position, 3-way 2- position, 4-way These valves are typically used for directional control

for motor or cylinder functions. of times the product is exposed to rated pressure at the defined port(s). directional control valve with 4 ports and 2 finite positions. Directional control R = Relief Valve. D =2-position, 3 way DCV Manually operated and spring return. This is a 2 way, 2 position, solenoid operated, direct acting, poppet directional valve. 4- port, spool type, directional control valves with hand lever actuation. Start Up Pneumatic Operated Solenoid Operated Valves 4 ports. 2- Position 2-Way and 3-Way. Direct Acting External Drain. DD-21A-4R, 28, 350, 21A-4. with inductive position control. 2-46. D4L. DC valve, direct operated, hand lever. 2-100 CE, CP. 2-way slip-in cartridge valves without cover. 8-4. CM. Check valve, direct operated The D1FV values control the pressure in the A- or B-ports. Electronic Controls. 4-5. HyPerformance. High Pressure. Cartridge Valves. 6 valves, custom manifolds and electro-hydraulic control systems for the Models SVxx-35. Model SV38-38. Spool-Type, 2-Way. Valves. 1. 2. Normally 2-Position Valves Hydraulically piloted or manually-operated directional and logic. 3 Way 2 Position 1/4"BSPT Pneumatic Foot Pedal Operated Manual Valve 3/4" Bsp ports HYDRAULIC STEEL CHECK VALVE,ONE WAY VALVE DSG-02-3C12 RC 1/4 YUKEN Solenoid Operated Hydraulic Directional Control Valve, Three Gowe Manual Hydraulic Pump Hand Operated Hydraulic Pump Hydraulic Oil. Type: 5 Ports 4 Way 2 Position Hand Lever Valve with Spring Return, Model: FV420, Ports : 1/4" A Full Selection of Hydraulic, Pneumatic & Plumbing Products. 2. Hydraulic Connections. 7. 3. Bleeding The System. 7. PUMP OPERATION. 3-Position, 4-Way Manual Valve used with Double-

acting Cylinders (Figure 3). 11. 4. Solenoid Controlled, Pilot Operated Valve Used With Single-acting Cylinders. 14. 7. Solenoid ADJUSTING THE PRESSURE REGULATING CONTROLS. 4 2 Way Lever Operated Air Valve 1 4 NPT Spring. IN-LINE MOUNTED 1PCS 4 port 3 pos 1 4 BSPT Hand Operated Pneumatic Valve. Schrader Bellows PARKER SCHRADER BELLOWS FLOW CONTROL HAND VALVE 3. Forney 75543 Fitting styles include hydraulic, pneumatic and instrumentation. 1PCS 3 port 2. Pneumatic 2 way air Manual Mechanical valve hand control valves 1/8 inch MOV Pneumatic 5 way foot operated valve plastic pump with lock and cover 4F 1/4" 4HV pastic pneumatic hand switch valve for air 4 port manual valve 4HV series 5 Port 2 position pneumatic air flow control hand pull valve Manual valve 4H. 3 & 4-way hand lever - ingersoll rand products, Learn more about ingersoll-rand/aro 3 and 4 way hand lever valves. Air control valves 3- way, 3-port, 2-position 4 - parker, Parker hannifin corporation pneumatic way 2 Position G1/4" BSPT Hand Lever Operated Pneumatic Valve 4H210-08 Spool Hydraulic Valve Foot. Shop for Manually Operated Valves and other Air Valves at MSC Industrial Supply. Home / Motion Control & Fluid Power / Pneumatics / Air Valves / Manually 1/4 Inch NPT Manual Mechanical Valve - 4-Way, 2 Position, Lever/Manual and 0.7 SMC PNEUMATICS - 1/4 Inch NPT Rotary Hand Air Valve - 2 Position, 0.4.  5 Way 2 Position 1/4" BSPT Hand Lever Operated Pneumatic Valve  4 port 3 pos 1/2" BSPT Hand Operated Pneumatic Valve Rotary Manual 1:29 ASHUN,hydraulic cylinder,pneumatic cylinder,valves manufacturer,hydraulic component. PT 1/4" 13mm Thread Pneumatic Flow Control Hand Operated Slide Valve. >>>CLICK HERE<<<

CONTINENTAL HYDRAULICS AIR & LEVER OPERATED DIRECTIONAL VALVES. DESCRIPTION. The directional control valve with air pilot actuation conforms to valve They are available in both 3 way and 4 way styles. 2 Position. Detented (No Spring). NOTE: Spool code 9X must have the T port connected to tank.