D Series Pump End Kits PAGE: CP-43 DATE: June, 06 D Maximize your fl exibility and response time for standard or special applications using end suction centrifugal pumps... industrial use, transfer circulation or booster service. Features: Each kit has a maximum O.D. impeller that can be trimmed to satisfy any of several horsepower requirements, thus eliminating the need to stock a complete unit for each horsepower. Note: Impellers should be balanced after trimming. A case, bracket, and hardware kit come with each kit to build a complete pump (motor not included). DC4-0HP pump end kits are available with either NPT suction/discharge or fl anged suction/discharge. All other models are NPT only. Heavy-duty cast iron body for increased durability. DA1A, DA1B, DB1-1/2, DC1-1/2, and DB2 Series are fi tted with bronze impeller. DB3 is fi tted with cast iron impeller. DC4 is fi tted with epoxy coated cast iron impeller. DDD models include thermoplastic impellers. 1/3-2HP models have 6C frame motors with shaft coupling design for easy removal. (Except DDD models which have 6Z frame motors.) - 0HP models have JM frame motors with shaft sleeve/ o-ring design for added protection against shaft damage. 3HP models can use either JM or 6 frame motors. Mechanical shaft seal handles water temperatures up to 212 o F. Note: For higher temperature applications, consult your mechanical seal supplier. Max. operating working pressure is 10 PSI. All models are 300 RPM. Models DB1, DB1-1/2, and DB2 are also available in 170 RPM. Mi8316 0 East Spring Street, Bluffton, IN 46714
D Series Pump End Kits - Ordering Information PAGE: CP-4 DATE: June, 06 D SERIES CENTRIFUGAL PUMP END KITS for 300 R.P.M. - O.D.P. MOTORS Series Suction x HP Motor Frame Max. Imp. PUMP END KIT Phase Discharge Range Size Diameter Model No. Order No. Wt. DA1A 1-1/4 x 1 1/3-1 1 or 3 6C -1/16 FPDA1A-K1 93167413R011 1 DA1B 1-1/4 x 1 1/2-2 1 or 3 6C -1/16 FPDA1B-K1 93167413R021 1 3/4-3 1 or 3 6C 6-1/8 FPDB1-K1 93167413R032 2 DB1 1-1/2" x 1" 3 182JM 1 184JM 6-7/16 FPDB1-K2 93167413R03 3 1-3 1 or 3 6C -1/8 FPDB1-1/2-K1 93167413R072 3 182JM DB1-1/2 2" x 1-1/2" 1 184JM 6-7/16 FPDB1-1/2-K2 93167413R083 7-1/2 3 184JM 7-1/2 1 213JM 6-7/16 FPDB1-1/2-K3 93167413R093 4 3 3 14JM 3 1 182JM 3 182JM -3/16 FPDC1-1/2-K2 93167413R133 4 1 184JM DC1-1/2 2" x 1-1/2" 7-1/2 3 184JM 6-/8 FPDC1-1/2-K2A 93167413R143 4 7-1/2 1 213JM 6-/8 FPDC1-1/2-K3A 93167413R163 3 213JM 1 21JM 8-3/8 FPDC1-1/2-K3 93167413R173 1 3 21JM 1-1/2-3 1 or 3 6C 4-1/2 FPDB2-K1 93167413R2 3 182JM 1 184JM -3/16 FPDB2-K2 93167413R113 0 7-1/2 3 184JM DB2 3" x 2" 7-1/2 1 213JM 3 213JM 6-7/16 FPDB2-K3 93167413R123 60 1 21JM 1 3 21JM 7-1/4 FPDB2-K3A 93167413R193 6 3 24JM 7-1/16 FPDB2-K4 93167413R4 70 3 182JM 1 184JM 4-1/16 FPDB3-K2 93167413R21 60 7-1/2 3 184JM 7-1/2 1 213JM DB3 4" x 3" 3 213JM -3/4 FPDB3-K3 93167413R22 70 1 21JM 1 3 21JM 3 24JM 6 FPDB3-K4 93167413R236 7 3 24JM 2 3 26JM 7-1/32 FPDC4-K4 93167413R277 14 4" x 4" 3 284JM 3 286JM 9-1/32 FPDC4-K 93167413R288 1 0 3 324JM DC4 3 24JM 7-1/32 FPDC4-K4F 93167413R297 160 2 3 26JM " x 4" Flanged 3 284JM 3 286JM 9-1/32 FPDC4-KF 93167413R8 170 0 3 324JM Notes: Maximum O.D. impeller supplied with P.E. Kits. Impeller must be trimmed to match motor H.P. Refer to performance curves for specifi c impeller trim diameters. Consult catalog for specifi c trims sizes and performance. Impellers should be rebalanced after trimming. D
D Series Pump End Kits - Ordering Information D SERIES CENTRIFUGAL PUMP END KITS for 170 R.P.M. - O.D.P. MOTORS Series Suction x HP Motor Frame Max. Imp. PUMP END KIT Phase Discharge Range Size Diameter Model No. Order No. Wt. DB1 1-1/2" x 1" 1/3-1/2 1 or 3 6C 6-7/16 FPDB1-K1 93167413R242 2 DB1-1/2 2" x 1-1/2" 1/3-1 1 or 3 6C 6-7/16 FPDB1-1/2-K1 93167413R22 Notes: DB2 3" x 2" 1/2-3/4 1 or 3 6C 6-7/16 FPDB2-K1 93167413R262 1-1-1/2 1 or 3 6C 6-7/16 FPDB2-K2 93167413R272 Maximum O.D. impeller supplied with P.E. Kits. Impeller must be trimmed to match motor H.P. Consult catalog for specifi c trims sizes and performance. Impellers should be rebalanced after trimming. Kit No. Frame Size Fit K1 6 K2 14-182-184JM K3 213-21JM K4 24-26JM K 284-286-324-326JM Mi8317 0 East Spring Street, Bluffton, IN 46714
Model DB1 Performance 1 Discharge x 1-1/2 Suction (170 RPM) PAGE: CP-44 DATE: June, 06 6-7/16 DIA. 6-1/8 DIA. 0% 2% PSI 1 TOTAL HEAD - FEET 6% 4% 2% 0%. BHP.3 BHP NPSHR NPSHR - FEET 0 1 2 3 CAPACITY - GALLONS PER MINUTE DB1 1-1/2 Suction x 1 Discharge Capacities GPM Total Head in Feet HP Imp. Dia. 1 2 3 4 0 1/3 6-1/8 39 33 26 16 38 1/2 6-7/16 3 21 44 Note: 170 RPM Models are available as D Series Pump End Kits only. Shut-off Head (Ft.) D
Model DB1-1/2 Performance 1-1/2 Discharge x 2 Suction (170 RPM) 6-7/16 DIA. 1-3/4 DIA. 67% PSI TOTAL HEAD - FEET -1/8 DIA. 4-/8 DIA. 68%. BHP % 1 BHP.7 BHP NPSHR - FEET NPSHR.3 BHP 0 60 80 0 1 1 160 CAPACITY - GALLONS PER MINUTE DB1-1/2 2 Suction x 1-1/2 Discharge Capacities GPM Total Head in Feet HP Imp. Dia. 1 2 3 4 0 1/3 4-/8 64 0 24 21 1/2-1/8 66 2 27 3/4-3/4 84 70 4 3 1 6-7/16 98 86 70 46 43 Note: 170 RPM Models are available as D Series Pump End Kits only. Shut-off Head (Ft.) Mi8318 0 East Spring Street, Bluffton, IN 46714
Model DB2 Performance 2 Discharge x 3 Suction (170 RPM) PAGE: CP-40 DATE: June, 06 6-7/16 DIA. 70% 1-13/16 DIA. 70% PSI TOTAL HEAD - FEET -1/8 DIA. 4-7/8 DIA. 72% 1. BHP. BHP.7 BHP 1 BHP NPSHR - FEET NPSHR 0 60 80 0 1 1 CAPACITY - GALLONS PER MINUTE DB2 3 Suction x 2 Discharge Capacities GPM Total Head in Feet HP Imp. Dia. 1 2 3 4 0 1/2 4-7/8 114 90 6 22 3/4-1/8 112 88 2 1-13/16 127 4 70 33 1-1/2 6-7/16 16 144 128 8 69 42 Note: 170 RPM Models are available as D Series Pump End Kits only. Performance supplied for D Series Pump End Kit sizing. Complete 170 RPM units not available. Shut-off Head (Ft.) Mi8319 0 East Spring Street, Bluffton, IN 46714