Replacement Parts List No. 57113700 Revision AB 04/2016 McQuay Westinghouse Centrifugal Chiller PE, PEH 126 PE 550-1200 Last Manufactured: 2002 To find your Daikin Applied parts distributor, call 1-800-377-2787 or visit www.daikinapplied.com
Contents Parts List Revision History... 3 Nomenclature... 5-11 Unit Assembly Components Vessel Insulation... 12 Unit Assembly Components 1988-2002 End View- Vessel Connection End... 13 End View- Vessel Return End... 14 Expansion Valve Piping- Units With Hot Gas Bypass... 15-16 Expansion Valve Piping- Units Without Hot Gas Bypass... 17-18 Front View- Main Components... 19-22 Unit Assembly Components 1988-1996: Shell & Tube Oil Cooler Components... 23 Unit Assembly Components 1988-2002: Motor Cooling Filter Drier Assembly- Parts Detail... 24 Unit Assembly Components 1988-1996: Front View- Part Two; Insulation, Brackets, Hardware... 25 Unit Assembly Components 1988-2002: Oil Pump Piping... 26 Unit Assembly Components 1988-1996: Refrig Cooled Oil Circuit Piping; Shell & Tube Oil Cooler... 27-28 Unit Assembly Components 1996-2002: Refrig Cooled Oil Circuit Piping; Plate to Plate Oil Cooler... 29 Unit Assembly Components 1988-1996: Water Cooled Oil Cooler Piping- Shell & Tube Oil Cooler... 30-31 Unit Assembly Components 1988-1996 Water Cooled Oil Cooler Piping- Plate to Plate Oil Cooler... 32 Unit Assembly Components 1988-1996: Hot Gas Bypass- Units with Shell & Tube Oil Cooler... 33-34 Unit Assembly Components 1996-2002: Hot Gas Bypass- Units with Plate- To- Plate Oil Cooler... 35 Unit Assembly Components 1988-2002 Liquid Injection Assembly Components... 36 Expansion Valve- Parts Detail... 37 Unit Assembly Components- 1979-1988: Side Mounted Compressor... 38-39 Factory Mounted Starter... 40-41 Surge Capacitor, Power Correction Capacitor, 50 Hz Capacitor Modification, Flow Switch Option... 42 Mounting Brackets... 43 Control Box- Model 180 (1987-94)... 44-51 Control Box- Series 200... 52-57 Lube Box-Used With MicroTech Series 200 Panels... 58-59 Lube Box- 1982-1994... 60-61 Control Box- Electromechanical Controls 1982-1987... 62-65 Control Box- Electromechanical Controls 1979-1981... 66-72 Evaporator... 73-75 Condenser... 76-78 Differential Water Pressure Switch... 79-80 Compressor Gears... 81 Inlet Guide Vane Assy... 82 Front End Components- Impeller Assembly... 83-84 Front End... 85-86 High Speed Assembly... 87-88 Gear Train Assembly... 89-90 Terminals and Terminal Boxes... 91-94 Motor Housing Components... 95-96 Motor Replacement Notes... 97 Motors... 98-102 Oil Pump- 1987 to 2002... 103-108 Valve Caps... 109 Paint... 109 Oil... 109 Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 2
Parts List Revision History Revision Date Description A thru Y Revision history details archived. Z 05/12 Page 4 - Added page for information on "Other Centrifugal Model Numbers". Page 90 - Added part number for Victaulic Coupling, 14" to Ref. 153. Page 100 - Corrected part number for Ref. 461 Valve, was 735033947. Page 101 - Added page for "Compressor- Motor Replacement Notes". Pages 102 thru 106 - Updated notes to "See Compressor-Motor Replacement Notes" page. AA 02/2016 Page 59 - Corrected description and part # for T.D. Adjustable OTD, was Label 735074521; and T.D. Adjustable PLT, was Label 735074520. Pages 69-73 - Removed all Evaporator Heads (4 pages). Added note to contact Daikin Applied. Pages 77-81 - Removed all Condenser Heads (4 pages). Added note to contact Daikin Applied. Page 101 - Added part #s for O-Ring Kit and Gerotor Assy Kit. AB 04/2016 Pages 8-11: Added 4 pages for Complete Model Nomenclature- McQuay Units. Daikin Applied, 13600 Industrial Park Blvd., P.O. Box 1551, Minneapolis, MN 55440 (763) 553-5330 Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 3
Other Centrifugal Models This Replacement Parts List can be used to identify components for the Compressor, Control Panel, Oil Pump, Condenser, and Evaporator on the following unit models: Open Drive Chillers: PG, PEA*, PEL, PLA Heat Recovery Chillers: PH, PHH, PJ, PJH, PHA, PLH Condensing Units: SE, SEH, SEA* Templifiers: TPE, TEH, TEA, TFH, TPF, THH, TPH, THA, TPJ, TJH * For models PEA/SEA 050-100 also see RPL 552298. Consult Daikin Applied for identification of other components on these models. Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 4
Nomenclature Westinghouse Units: 1979-1982 Serial Numbers 1979-1982 AU 1234 Serial Number Year and Month of Manufacture: Month Year A= Jan. M= 1968 Y=1980 B= Feb. N= 1969 Z=1981 C= Mar. O= 1970 A=1982 D= Apr. P= 1971 E= May Q= 1972 F= Jun R= 1973 G= Jul S= 1974 H= Aug T= 1975 I= Sep. U= 1976 J= Oct. V= 1977 K= Nov. W= 1978 L= Dec. X= 1979 Unit Shop Order Number ex. PE4023 The Shop Order Number (called the "style number" in earlier years) was a 6 digit number that appeared on the unit data plate of all units built during the Westinghouse era. This number is the one number that allows Daikin Applied access to the original job file and Bill-of-Material. It is crucial that the field supply this number when inquiring about parts identification or when original unit data information is required. The Shop Order number is also key when requesting R134a retrofit information. Unit Style Number ex. 359A777G10 The Style Number was a 10 digit number that appeared on the unit data plate of units built in the Westinghouse era's later years. This number is the highest level bill-of material number for the specific unit. Unit Model Number PE 460 Nominal Tonnage Unit Type: PE- Centrifugal Chiller, Single Compressor Condenser Model Number KB870 Model Number See Condenser Tube Count Table Evaporator Model Number TC742 Model Number See Evaporator Tube Count Table Compressor Model Number CE 126 J BK 18 R Motor HP (X10) Gear Ratio (see Compressor Gear Tables) Impeller Type: J or K Impeller Size: 126= 12.6" Compressor Type: CE= Centrifugal Hermetic Unit Voltage N=200/60/3 B=208/60/3 P=220/60/3 V=230/60/3 W=240/60/3 U=380/60/3 A=440/60/3 R=460/60/3 S=480/60/3 D=575/60/3 M=2400/60/3 C=3300/60/3 L=4160/60/3 E=220/50/3 Y=346/50/3 F=380/50/3 G=400/50/3 K=415/50/3 H=440/50/3 J=3300/50/3 Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 5
Nomenclature Serial Number and Style Number- McQuay Units- 1982-2002 Serial Numbers (on all data plates) 1982-1994 5 ZA 12345 00 Serial Numbers (on all data plates) 1995- February, 1999 5 5A 12345 00 Factory 5= Staunton,VA Engineering Revision Serial Number Year and Month of Manufacture: Year Month S= 1987 A= Jan. J= Sep. T= 1988 B= Feb. K= Oct. U= 1989 C= Mar. L= Nov. V= 1990 D= Apr. M= Dec. W= 1991 E= May X= 1992 F= Jun Y= 1993 G= Jul Z= 1994 H= Aug Factory 5= Staunton,VA Engineering Revision Serial Number Year and Month of Manufacture: Year Month 5= 1995 A= Jan. G= Jul 6= 1996 B= Feb. H= Aug 7= 1997 C= Mar. D= Apr. E= May F= Jun J= Sep. K= Oct. L= Nov. M= Dec. Serial Numbers (on all data plates) February, 1999 and later STN C 99 05 048 Plant Identification Abbreviation STN = Staunton C= Compressor Year of Manufacture 99= 1999 00= 2000 01= 2001 etc. Serial Number (build sequence) Month of Manufacture 01= January 02= February 03= March 04= April 05= May 06= June 07= July 08= August 09= September 10= October 11= November 12= December Unit Style Number - 1983-2002 (On all Unit Data Plates): 0923456010 Unit Style Number - 1982 1PE6655G01 G. O. Item Number 6 digit G. O. Number Shop Order Number Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 6
Nomenclature Unit, Compressor, Condenser and Evaporator Model Number Unit Model Number PEH 126 J BK 18 R Motor HP (X10) Gear Ratio (See Compressor Gear Tables) Impeller Type: J, K,L,M Compressor Size: 126= 12.6" Impeller Dia. Unit Type: PEH= Water Cooled Centrifugal Chiller-Single Compressor- Hermetic Unit Voltage N=200/60/3 B=208/60/3 P=220/60/3 V=230/60/3 W=240/60/3 U=380/60/3 A=440/60/3 R=460/60/3 S=480/60/3 D=575/60/3 M=2400/60/3 C=3300/60/3 L=4160/60/3 E=220/50/3 Y=346/50/3 F=380/50/3 G=400/50/3 K=415/50/3 H=440/50/3 J=3300/50/3 4= 400/60/3 Q= 416/60/3 3= 2300/60/3 T= 4600/60/3 2= 6600/60/3 Z= 500/50/3 6= 3000/50/3 8= 6000/50/3 9= 6600/50/3 Compressor Model Number CE 126 J BK 18 R Motor HP (X10) Gear Ratio (See Compressor Gear Tables) Impeller Type: J,K,L,M Impeller Size: 126= 12.6" Compressor Type: CE= Centrifugal Hermetic Unit Voltage N=200/60/3 B=208/60/3 P=220/60/3 V=230/60/3 W=240/60/3 U=380/60/3 A=440/60/3 R=460/60/3 S=480/60/3 D=575/60/3 M=2400/60/3 C=3300/60/3 L=4160/60/3 E=220/50/3 Y=346/50/3 F=380/50/3 G=400/50/3 K=415/50/3 H=440/50/3 J=3300/50/3 4= 400/60/3 Q= 416/60/3 3= 2300/60/3 T= 4600/60/3 2= 6600/60/3 Z= 500/50/3 6= 3000/50/3 8= 6000/50/3 9= 6600/50/3 Evaporator Model Number E 3016 3C 2RA Nozzle Configuration A= Victaulic B= Flanged C/D= Water Boxes- Victaulic E/F= Water Boxes- Flanged Water Connection End Head Passes Tube Type Tube Count Length (in feet) Diameter (in inches) Vessel Type:E= Evaporator Condenser Model Number C 3016 3CYY 2RA Tube Type-HR Condenser Tube Count-HR Condenser Tube Type-Tower Condenser Tube Count-Tower Condenser Length (in feet) Diameter (in inches) Vessel Type: C= Condenser Nozzle Configuration A= Victaulic B= Flanged C/D= Water Boxes- Victaulic E/F= Water Boxes- Flanged Water Connection End Head Passes Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 7
Nomenclature Complete Model Number- McQuay Units PEH 126K BH 95R YY Y B E2612 3B 2RA A1 0450 CC Y A C2212 3CYY Code: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 1. Model Type PEH= Water Cooled Single Compressor Centrifugal Chiller PFH= Water Cooled Dual Compressor Centrifugal Chiller 2. Compressor Size/Impeller Type first 3 digits= Impeller Diameter 126 (12.6" impeller) fourth digit= Impeller Width G=.112"; H=.143"; J=.179"; K=.224"; M=.242" 3. Gear Ratio Code (speed code) BB, BC, BD, BE, BF, BG, BH, BJ, BK, BL, BM, BN, BP, BQ, BR, BS, BT, BU, BV 4. Motor Horsepower/Voltage first 2 digits= horsepower 60 Hz. Codes 61= 610HP 72= 720HP 84= 840HP 95= 950HP N0= 990HP N1= 1090HP N2= 1190HP N3= 1290HP M4= 1400HP 50 Hz. Codes 71= 710HP 83= 830HP N0= 990HP N1= 1090HP N2= 1190HP third digit= voltage 60 Hz. Codes N= 200V B= 208V P= 220V V= 230V W= 240V U= 380V A= 440V R= 460V R= 460V S= 480V D= 575V Q= 416V M= 2400V C= 3300V L= 4160V 50 Hz. Codes E= 220V Y= 346V F= 380V G= 400V K= 415V H= 440V J= 3300V 5. Open Drive Motor Description YY= Hermetic Motor or no motor provided 6. Sound Control L= Liquid Injection Y= None 2RAYYY B1 1400 CCYY YY A A 134 082 HA MYEYSA 2FYY2YYY 0191 H 11 Y 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 1 1 A Y W 1 1 U A 0250 U B C Y Y Y Y Y Y 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 7. Compressor Revision Level A= Rev. Level A B= Rev. Level B C= Rev. Level C 8. Evaporator Description E= Standard Evaporator digits 2 and 3= Diameter (inches); digits 4 and 5= Length (feet) 1608, 1612, 1808, 1812, 1816, 2008, 2012, 2014, 2016, 2208, 2212, 2214, 2216, 2412, 2416, 2612, 2614, 2616, 3012, 3014, 3016, 3616, 4216, 4220, 4224, 4820, 4824 Example: E2008= Standard Evaporator, 20" Diameter, 8' Long 9. Evaporator Tube Description first digit= Tube Count- Contact Daikin Applied second digit= Tube Type- Tubes have changed over the years. Listed below are the most recent and common tubes. E= Turbo EFP.025 Wall; F= Turbo EFP.028 Wall; Q= Turbo EFP.035 Wall 10. Evaporator Head Description first digit= Number of Water Passes: 1, 2, 3 second digit= Inlet Nozzle Location: L= Left R= Right third digit= Nozzle Type: A= Victaulic (std.); B= Flanged; C= Marine Box- Front Victaulic; D= Marine Box- Rear Victaulic; E= Marine Box- Front Flanged; F= Marine Box- Rear Flanged Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 8
Nomenclature Complete Model Number- McQuay Units 11. Evaporator Design Pressures first digit= Refrigerant Side Pressure: B= 180 PSIG second digit= Waterside Pressure: 1= 150 PSIG ASME; 2= 250 PSIG ASME; 3= 350 PSIG ASME; 4= 150 PSIG Non-ASME 12. Evaporator Leaving Water Temperature Code is listed in tenths of F (example 0450= 45.0 F) 13. Evaporator Tube Sheet & Head Material first digit= Tube Sheet Material: C= Carbon Steel second digit= Head Material: C= Carbon Steel 14. Evaporator Tube Cleaning System Y= None 15. Evaporator Model Revision A= Rev. Level A B= Rev. Level B C= Rev. Level C 16. Condenser Description E= Standard Condenser digits 2 and 3= Diameter (inches); digits 4 and 5= Length (feet) 1608, 1612, 1808, 1812, 1814, 1816, 2008, 2012, 2016, 2208, 2212, 2214, 2216, 2412, 2416, 2612, 2614, 2616, 3012, 3014, 3016, 3616, 4216, 4220, 4224, 4816, 4820, 4824 Example: C2008= Standard Condenser, 20 Diameter, 8 Long 17. Condenser Tube Description first digit= Tube Count- Contact Daikin Applied second digit= Tube Type- Tubes have changed over the years. Listed below are the most recent and common tubes. E= Turbo EFP.025 Wall; F= Turbo EFP.028 Wall; Q= Turbo EFP.035 Wall 18. Condenser Head Description first digit= Number of Water Passes: 1, 2, 3 second digit= Inlet Nozzle Location: L= Left R= Right third digit= Nozzle Type: A= Victaulic (std.); B= Flanged; C= Marine Box- Front Victaulic; D= Marine Box- Rear Victaulic; E= Marine Box- Front Flanged; F= Marine Box- Rear Flanged If there is no Heat Recovery Condenser digits 4, 5 & 6= YYY 19. Condenser Design Pressures first digit= Refrigerant Side Pressure: D= 225 PSIG; E= 250 PSIG; F= 275 PSIG; G= 300 PSIG second digit= Waterside Pressure: 1= 150 PSIG ASME; 2= 250 PSIG ASME; 3= 350 PSIG ASME; 4= 150 PSIG Non-ASME (std.) 20. Maximum Condenser Leaving Water Temperature Code is listed in tenths of F (example 1370= 137.0 F) 21. Condenser Tube Sheet & Head Material first digit= Tube Sheet Material: C= Carbon Steel (std.) second digit= Head Material: C= Carbon Steel (std.) If there is no Heat Recovery Condenser digits 3 & 4= YY 22. Condenser Tube Cleaning System YY= None 23. Condenser Model Revision A= Rev. Level A B= Rev. Level B C= Rev. Level C 24. Pressure Vessel Code A= ASME (standard) 25. Refrigerant Type 134= Refrigerant 134a Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 9
Nomenclature Complete Model Number- McQuay Units 26. Refrigerant Weight Total weight divided by 10 rounded to next whole number (example: 1712/10= 172) 27. Main Expansion Valve/ Pilot Valve first digit= Main Expansion Valve: F= 125 ton; G= 150 ton; H= 180 ton; I= 250 ton; J= 300 ton; K= 350 ton; L= 375 ton; O= 1400 ton; P= 800 ton; Q= 550 ton; R=1100 ton second digit= Pilot Valve: A= 4 ton; B= 9 ton; C= 10 ton 28. Controller Options M= MicroTech 200 second digit= Sensor Functions: A= Outdoor Air (OA) Thermistor S20; B= OA and HR; H= Heat Recovery (HR) Thermistors S21/S22 third digit= Language: E= English Language/English Units; M= English Language/Metric Units fourth digit= Instruments: M= Modem; Y= None fifth digit= Special Functions: A= Analog Outputs; B= Analog Outputs & Signal Converter; S= Signal Converter; Y= None sixth digit= Enclosure: A= NEMA 1 29. Starter Options first digit= Starter Type: 1= Star-Delta Open; 2= Star-Delta Closed; 3= Across-The-Line; 4= Auto Transformer; 5= Primary Reactor; 6= Solid State second digit= Enclosure: C= NEMA 1 Compact; D= NEMA 1 Double Door Compact; F= NEMA 1 Full Size; K= Evap brackets only; S= NEMA 1 Shelf-Mounted; Y= None third digit= Meters: 1= Voltmeter; Y= None fourth digit= Disconnect: A= Circuit Breaker; B= MCP Motor Circuit Protector; C= Non-fused Disconnect Switch; Y= None fifth digit= Surge Protection Capacitor: 1= P.F. Correction; 2= Surge Protection; 3= P.F. and Surge Protection; Y= None sixth digit= Phase Loss/Rotation Protection: A= PVR Relay Under; B= PVR Relay Over and Under; Y= None seventh digit= Ground Fault Protection: 1= with Groundgard; Y= None eighth digit= Load Balance: 2= 2 Machine load balance; 3= 3 Machine load balance; 4= 4 Machine load balance; Y= None 30. Rated Load Amps Actual RLA 31. Hot Gas Bypass H= Hot Gas Bypass Y= None 32. Insulation first digit= Condenser & Evaporator Shell Insulation: H= 3/4" Closed Cell Foam Insulation on Evaporator Shell, Suction Piping, Compressor Inlet, Motor Barrel + High Humidity 2= 3/4" Closed Cell Foam Insulation on Condenser Shell Only 3= 1-½" Closed Cell Foam Insulation on Evap. Shell, ¾" Insulation on Suction Piping, Comp. Inlet, Motor Barrel + High Humidity 5= Code H + Code 2 6= Sound Insulation on Condenser & Discharge Line 7= Sound Insulation on Discharge Line Only M= Code H + Code 7 N= Code 3 + Code 7 S= Code H + Code 6 T= Code 3 + Code 6 Y= None second digit= Condenser & Evaporator Head Insulation: 1= Return Heads Only; 2= Return & Connection Heads; Y= None 33. Water Pressure Differential Switch E= Evaporator C= Condenser B= Both Evaporator & Condenser Y= None 34. Paint 1= Standard Painting 35. Packaging 1= Standard Wood Skid; 2= Open Export Crate; 3= Totally Enclosed Export Crate; 4= Shipping Bag w/wood Skid 5= Shipping Bag Only; 6= Shipping Bag w/ Totally Enclosed Export Crate; 7= Shipping Bag w/open Export Crate; Y= None 36. Refrigerant Tag A= Full Factory Charge B= Holding Charge 37. Miscellaneous Y= None X= Special (specials not covered in the normal code string) Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 10
Nomenclature Complete Model Number- McQuay Units 38. Oil Cooler R= Refrigerant; W= Water; S= Water Cooled w/factory Solenoid; Y-None 39. Rebate Y= None; R= Rebate 40. Testing 1= Standard Factory Performance Test 2, 9, A, B, C, D, E, F, G, H, J, Q, S= Various Witness Tests 3, 4, 5, 6, 7, 8, K, L, M, N, P, R, T= Various Certified Performance Tests Y= None 41. Approval Listing A= ARI Approval U= UL C= Canadian UL V= ARI + UL D= Canadian ARI + UL Y= None 42. Latest Unit Model Revision A= Rev. Level A B= Rev. Level B C= Rev. Level C 43. Tons Actual Tons 44. Startup Y= Export- No Startup U= Domestic Startup 7= Canadian Startup 45. Labor Warranty Y= Export Order, no labor warranty B= Domestic Order, 1st year labor warranty 7= Canadian Order, 1st year labor warranty 46. Extended Warranties Y= None C= Extended 1 year parts; D= Extended 1 year parts + labor; E= Extended 2 year parts; F= Extended 2 year parts + labor; G= Extended 3 year parts; H= Extended 3 year parts + labor; J= Extended 4 year parts; K= Extended 4 year parts + labor 47, 48, 49, 50, 51, 52 Always Y Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 11
Unit Assembly Components Vessel Insulation Evaporator The Evaporator may be ordered with 3/4" or 1 1/2" insulation on the vessel and piping. The part numbers are the same and the 3/4" insulation is double-layered on units using the 1 1/2" application. The Evaporator Vessel nomenclature is as follows: 3616 Vessel Diameter Vessel Length Vessel Application Quantity---------------------------------------Part Number 3016 3/4" 148 square feet-------------------------------047662050 3616 3/4" 172 square feet-------------------------------047662050 4216 3/4" 198 square feet-------------------------------047662050 3016 1 1/2" 290 square feet-------------------------------047662050 3616 1 1/2" 341 square feet-------------------------------047662050 4216 1 1/2" 392 square feet-------------------------------047662050 Condenser The Condenser may be ordered with standard 3/4" foam insulation, or with a Sound Insulation package for the Condenser Vessel and Discharge Line. The Condenser Vessel nomenclature is as follows: 3616 Vessel Diameter Vessel Length Vessel Application Quantity--------------------------------Part Number 3016 No Sound 128 square feet-----------------------047662050 3616 No Sound 153 square feet-----------------------047662050 4216 No Sound 178 square feet-----------------------047662050 3016 Sound 205 square feet-----------------------047662050 175 square feet-----------------------070715401 3616 Sound 200 square feet-----------------------047662050 185 square feet-----------------------070715401 4216 Sound 235 square feet-----------------------047662050 205 square feet-----------------------070715401 Evaporator/Condenser Heads The Insulation used on the Evaporator and Condenser Heads is the same. As with the Evaporator Vessel each head may have 3/4" or 1 1/2" insulation. Diameter Application Quantity----------------------------- Part Number 30 3/4" 12 square feet---------------------- 047662050 36 3/4" 15 square feet---------------------- 047662050 42 3/4" 21 square feet---------------------- 047662050 30 1 1/2" 25 square feet---------------------- 047662050 36 1 1/2" 33 square feet---------------------- 047662050 42 1 1/2" 44 square feet---------------------- 047662050 Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 12
Unit Assembly Components 1988-2002 End View- Vessel Connection End 30" Condenser Common Parts Ref # Qty. Description-----------------Part Number 21 10 Washer------------------------ 040500311 22 10 Lock Washer----------------- 048164814 23 4 Screw-------------------------- 735033845 24 8 Screw-------------------------- 735033847 25 2 Oil Pump Bracket Thru 12/96----------------- 070014405 1/97 and later- Right--- 071530811 1/97 and later- Left----- 071530911 35 8 Screw-------------------------- 000086100 36 8 Washer------------------------ 040500316 37 8 Lock Washer----------------- 048164812 40 2 Bracket------------------------ 070192101 43 8 Screw-------------------------- 735033878 57 12 Nut------------------------------ 735029608 36" & 42" Condenser Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 13
Unit Assembly Components 1988-2002 End View- Vessel Return End 30" Condenser Ref # Qty. Description----------------------- Part Number 55 16 Screw------------------------------- 735033878 216 1 Flange------------------------------ 735031833 217 1 Pipe Cond. Ref. Press= 225 (std)-070277301 Cond. Ref. Press.= 250-300-070269601 218 1 Reducer Flange High Pressure Units Only---- 070400607 1 O'Ring- all units------------------ 735073649 219 1 Pipe--------------------------------- 070740801 221 12 Nut---------------------------------- 735029609 223 1 Screw- Discharge Check Valve Cond. Ref. Press.= 225 (std) 735034153 Cond. Ref. Press.= 250-300-735034151 224 1 Discharge Check Valve Cond. Ref. Press.= 225 (std) 735040342 Cond. Ref. Press.= 250-300-735040343 225 2 Gasket- Disch. Check Valve-- 070199019 265 1 Flange- Evap. Inlet-------------- 070359501 266 1 O'Ring------------------------------ 735073630 274 1 Tube- Shell & Tube Oil Cooler 30" Evaporator---------- 070208252 36" Evaporator---------- 070208278 Tube- Plate to Plate Oil Cooler All Sizes------------------- 074797501 275 1 Tube- Shell & Tube Oil Cooler 30" Evaporator--------- 070208220 36" Evaporator--------- 070208246 Tube- Plate to Plate Oil Cooler All Sizes------------------- 074797601 30" Condenser (illustration is of older style Shell & Tube Oil Cooler unit) 36" & 42" Condenser Ref # Qty. Description----------------------- Part Number 55 16 Screw------------------------------- 735033878 216 1 Flange------------------------------ 735031833 217 1 Pipe Cond. Ref. Press= 225 (std)-072909401 Cond. Ref. Press.= 250-300-070264201 218 1 Reducer Flange High Pressure Units Only---- 070400607 1 O'Ring- all units------------------ 735073649 219 1 Pipe- 36" Condenser----------- 070740901 42" Condenser------------ 070741001 221 12 Nut---------------------------------- 735029609 223 1 Screw- Discharge Check Valve Cond. Ref. Press= 225 (std)-735034153 Cond. Ref. Press.= 250-300-735034151 224 1 Discharge Check Valve Cond. Ref. Press= 225 (std)-735040342 Cond. Ref. Press = 250-300-735040343 225 2 Gasket- Disch. Check Valve-- 070199019 265 1 Flange- Evap. Inlet-------------- 047139505 266 1 O'Ring------------------------------ 735073630 274 1 Tube- Shell & Tube Oil Cooler 30" Evaporator---------- 070208278 36" Evaporator---------- 070208316 Tube- Plate to Plate Oil Cooler All Sizes------------------- 074797501 275 1 Tube- Shell & Tube Oil Cooler 30" Evaporator---------- 070208246 36" Evaporator---------- 070208284 Tube- Plate to Plate Oil Cooler All Sizes------------------- 074797601 36" & 42" Condenser (illustration is of older style Shell & Tube Oil Cooler unit) Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 14
Unit Assembly Components 1988-2002 Expansion Valve Piping- Units With Hot Gas Bypass Diagrams 30" Condenser 269 280 36" & 42" Condenser These components only pertain to units with Shell & Tube Oil Coolers 269 Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 15
Unit Assembly Components 1988-2002 Expansion Valve Piping- Units With Hot Gas Bypass Components Expansion Valve Piping Ref # Qty. Description------------------------------------------------Part Number 55 16 Screw--------------------------------------------------------735033878 205 1 Shut Off Valve---------------------------------------------735039929 210 1 Flare Cap- after 3/95------------------------------------000140300 Flare Nut- before 3/95-----------------------------------073243901 265 1 Flange- Evaporator Inlet--------------------------------047139505 269 1 Weld Ring--------------------------------------------------735031342 271 1 Coupling Adapter-----------------------------------------071562001 272 1 Main TXV 1400 Ton (C27-1= O)---------------------------------070848001 900 Ton (C27-1= R)-----------------------------------070848011 273 1 Strainer Assembly----------------------------------------070977802 277 1 Liquid Tube Ass'y Stack 3030----------------------------------------------072102306* Stack 3630----------------------------------------------072102305* Stack 3636----------------------------------------------072102304* Stack 4236----------------------------------------------072102303* Stack 4242----------------------------------------------072102302* 278 1 Pilot Expansion Valve-----------------------------------735048667 279 1 Tube- Pilot Valve Stack 3030/3630--------------------------------------074818101 Stack 3636/4236/4242-------------------------------074807901 280 1 Ball Valve---------------------------------------------------036562904 281 1 Tube- Pilot Valve Stack 3030/3630---------------------------------------074818201 Stack 3636/4236/4242--------------------------------074808001 282 1 Tube- Pilot Valve-----------------------------------------070140131 283 1 Reducer-----------------------------------------------------041116611 312 1 Tube- Pilot Valve Stack 3030----------------------------------------------074818401 Stack 3630----------------------------------------------074818301 Stack 3636----------------------------------------------070208030 Stack 4236/4242--------------------------------------070208035 313 1 Strainer------------------------------------------------------735030501 314 1 Bushing-----------------------------------------------------041116716 315 2 T--------------------------------------------------------------071996102 316 1 Tube---------------------------------------------------------070978811 317 2 Flange- 4"--------------------------------------------------071992102 318 1 Coupling Adapter-----------------------------------------071901601 319 4 Screw--------------------------------------------------------735033967 320 1 Flange-------------------------------------------------------071269601 321 1 O'Ring-------------------------------------------------------735073695 334 1 Gasket-------------------------------------------------------735073403 340 1 O'Ring-------------------------------------------------------735073633 341 1 Coupling Adapter-----------------------------------------071900701 The following parts pertain only to units with shell & tube oil coolers) 712 1 Hot Gas Bypass Expansion Valve-------------------070848005 713 1 Coupling----------------------------------------------------070194801 714 1 T--------------------------------------------------------------735031349 715 1 Reducer-----------------------------------------------------735031365 716 1 T--------------------------------------------------------------041117803 717 1 T Assembly------------------------------------------------735061480 718 1 Gasket-------------------------------------------------------735073403 719 1 Flange-------------------------------------------------------071992102 722 2 Weld Ring- 4"----------------------------------------------735031319 727 4 Screw--------------------------------------------------------735033968 *Liquid Tube Components- Detail 070847502 Ref # Qty. Description----------- Part Number 2 1 Sight Glass Saddle-- 071901901 3 1 Sight Glass------------ 022427700 6 1 Valve Core------------- 026541100 7 1 Valve Cap-------------- 032943500 Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 16
Unit Assembly Components 1988-2002 Expansion Valve Piping- Units Without Hot Gas Bypass Diagrams 30" Condenser 282 283 36" & 42" Condenser 282 283 Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 17
Unit Assembly Components 1988-2002 Expansion Valve Piping- Units With Out Hot Gas Bypass Components Expansion Valve Piping Ref # Qty. Description------------------------------------------------Part Number 55 16 Screw--------------------------------------------------------735033878 205 1 Shut Off Valve---------------------------------------------735039929 210 1 Flare Cap- after 3/95------------------------------------000140300 Flare Nut- before 3/95-----------------------------------073243901 265 1 Flange- Evaporator Inlet--------------------------------047139505 269 1 Weld Ring--------------------------------------------------735031342 270 1 Elbow--------------------------------------------------------735031343 271 1 Coupling Adapter-----------------------------------------071562001 272 1 Main TXV 1400 Ton (C27-1= O)---------------------------------070848001 900 Ton (C27-1= R)-----------------------------------070848011 273 1 Strainer Assembly----------------------------------------070977802 277 1 Liquid Tube Ass'y Stack 3030----------------------------------------------072102306* Stack 3630----------------------------------------------072102305* Stack 3636----------------------------------------------072102304* Stack 4236----------------------------------------------072102303* Stack 4242----------------------------------------------072102302* 278 1 Pilot Expansion Valve-----------------------------------735048667 279 1 Tube- Pilot Valve Stack 3030/3630--------------------------------------074818101 Stack 3636/4236/4242-------------------------------074807901 280 1 Ball Valve---------------------------------------------------036562904 281 1 Tube- Pilot Valve Stack 3030/3630---------------------------------------074818201 Stack 3636/4236/4242 ------------------------------074808001 282 1 Tube- Pilot Valve-----------------------------------------070140131 283 1 Reducer-----------------------------------------------------041116611 312 1 Tube- Pilot Valve Stack 3030----------------------------------------------074818401 Stack 3630----------------------------------------------074818301 Stack 3636----------------------------------------------070208030 Stack 4236/4242--------------------------------------070208035 313 1 Strainer------------------------------------------------------735030501 314 1 Bushing-----------------------------------------------------041116716 315 2 Tee-----------------------------------------------------------071992102 316 1 Tube---------------------------------------------------------070978811 317 2 Flange- 4"--------------------------------------------------071992102 318 1 Coupling Adapter-----------------------------------------071901601 319 4 Screw--------------------------------------------------------735033967 320 1 Flange-------------------------------------------------------071269601 321 1 O'Ring-------------------------------------------------------735073695 334 1 Gasket-------------------------------------------------------735073403 341 1 Coupling Adapter-----------------------------------------071900701 *Liquid Tube Components- Detail 070847502 Ref # Qty. Description----------- Part Number 2 1 Sight Glass Saddle-- 071901901 3 1 Sight Glass------------ 022427700 6 1 Valve Core------------- 026541100 7 1 Valve Cap-------------- 032943500 Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 18
Unit Assembly Components 1988-2002 Front View- Main Components 30" Condenser 950 951 952 Expansion Valve Piping Ref # Qty. Description------------------------------------------------Part Number 17 8 Screw--------------------------------------------------------000164500 18 11 Nut-----------------------------------------------------------040499901 19 11 Lock Washer-----------------------------------------------048164808 207 1 Condenser 3- Way Valve-------------------------------735039964 208 1 Condenser Pipe Nipple with Sound Insulation-------------------------------071935501 without Sound Insulation---------------------------735031797 209 2 Evaporator Relief Valve---------------------------------See Relief Valve Tables 213 2 Condenser Relief Valve---------------------------------See Relief Valve Tables 226 1 Pipe----------------------------------------------------------P028UDBEAA 227 1 Pipe 30" Evaporator----------------------------------------P028UDBEAA 36" Evaporator----------------------------------------P032UDBEAA 228 1 Elbow--------------------------------------------------------073222101 229 2 Weld Ring--------------------------------------------------735031339 231 1 Coupling- 12"----------------------------------------------070193901 Coupling Gasket- 12"------------------------------------070194001 232 2 Drier Strap- through 9/96-------------------------------735057284 Drier Clamp- 10/96 to 2002----------------------------074674101 233 1 Tube- Motor Cooling 18" Motors (HP: 280, 350, 400, 450, 500, 550, 600, 650)-----072223501 22" Motors (HP: 600, 650, 700, 750, 800, 950, 1300)----------072223501 27" Motors (HP: 850, 1000, 1100, 1200, 1400)------------------072220901 235 1 Tube- Motor Cooling 18" Motors (HP: 280, 350, 400, 450, 500, 550, 600, 650)-----072223901 22" Motors (HP: 600, 650, 700, 750, 800, 950, 1300)----------074500701 27" Motors (HP: 850, 1000, 1100, 1200, 1400)------------------072223801 Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 19
Unit Assembly Components 1988-2002 Front View- Main Components 30" Condenser, Continued 236 1 Flange- thru 6/97-----------------------------------------070290301 Flange- 7/97 to 2002------------------------------------074614801 237 1 O'Ring-------------------------------------------------------735073629 238 2 Screw--------------------------------------------------------735033851 239 1 Tube- Motor Cooling 18" Motors (HP: 280, 350, 400, 450, 500, 550, 600, 650)-----070269401 22" Motors (HP: 600, 650, 700, 750, 800, 950, 1300)----------070264501 27" Motors (HP: 850, 1000, 1100, 1200, 1400)------------------070206050 240 1 Tube 30" Condenser----------------------------------------070369301 36" Condenser----------------------------------------070367301 42" Condenser----------------------------------------070363701 241 1 Filter Drier Assembly 18" Motors (HP: 280, 350, 400, 450, 500, 550, 600, 650)-----070024501* 22" Motors (HP: 600, 650, 700, 750, 800, 950, 1300)----------070024501* 27" Motors (HP: 850, 1000, 1100, 1200, 1400)------------------070024502* 243 1 Motor Cooling Flange 18" Motors (HP: 280, 350, 400, 450, 500, 550, 600, 650)-----744341501 22" Motors (HP: 600, 650, 700, 750, 800, 950, 1300)----------744341501 27" Motors (HP: 850, 1000, 1100, 1200, 1400)------------------775226601 244 2 Gasket-------------------------------------------------------070199014 246 4 Screw--------------------------------------------------------735017319 249 1 Tube Units with Shell & Tube Oil Cooler---------------070365101 Units with Plate to Plate Oil Cooler--------------074778301 250 1 Liquid Injection Assembly------------------------------070023801 (for components see Liquid Injection Detail) 251 2 Screw--------------------------------------------------------735033846 253 1 Tube- 30" Evaporator------------------------------------070368301 36" Evaporator-----------------------------------070367101 254 1 Tube- Motor Cooling 18" Motors (HP: 280, 350, 400, 450, 500, 550, 600, 650)-----072126602 22" Motors (HP: 600, 650, 700, 750, 800, 950, 1300)----------072126601 27" Motors (HP: 850, 1000, 1100, 1200, 1400)------------------072126601 257 2 Check Valve-----------------------------------------------735040326 259 1 Tube- w/hot gas only------------------------------------070208097 260 1 Tube---------------------------------------------------------070083601 261 1 Tube---------------------------------------------------------070373301 262 1 Tube---------------------------------------------------------070208035 263 4 Elbow--------------------------------------------------------041117106 282 1 Tube- Pilot Valve-----------------------------------------070140131 283 1 Reducer-----------------------------------------------------041116611 290 1 Line- Motor Drain-----------------------------------------744425301 292 1 T Assembly------------------------------------------------735061444 326 3 Screw--------------------------------------------------------735032732 327 3 Nut-----------------------------------------------------------040499805 350 4 Relief Valve Elbow- Condenser & Evaporator----735031239 950 1 Main Liquid (King) Valve--------------------------------735039809 951 1 King Valve Gasket---------------------------------------070199106 952 1 Motor Cooling Shut Off Valve-------------------------735039929 *For Filter Drier Assembly Components see Motor Cooling Filter Drier Assembly Components Section Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 20
Unit Assembly Components 1988-2002 Front View- Main Components 36" & 42" Condenser 350 213 259 952 950 951 Expansion Valve Piping Ref # Qty. Description--------------------------------------------Part Number 17 8 Screw-----------------------------------------------------000164500 18 11 Nut--------------------------------------------------------040499901 19 11 Lock Washer-------------------------------------------048164808 207 2 Condenser 3- Way Valve----------------------------735039964 208 2 Condenser Pipe Nipple with Sound Insulation----------------------------071935501 without Sound Insulation------------------------735031797 209 2 Evaporator Relief Valve-----------------------------See Relief Valve Tables 213 4 Condenser Relief Valve-----------------------------See Relief Valve Tables 226 1 Pipe-------------------------------------------------------P028UDBEAA 227 1 Pipe- 36" Evaporator---------------------------------P032UDBEAA Pipe- 42" Evaporator---------------------------------P036UDBEAA 228 1 Elbow-----------------------------------------------------073222101 229 2 Weld Ring-----------------------------------------------735031339 231 1 Coupling- 12"-------------------------------------------070193901 Coupling Gasket- 12"---------------------------------070194001 232 2 Strap------------------------------------------------------735057284 233 1 Tube- Motor Cooling- 36" Evaporator 18" Motors (HP: 280, 350, 400, 450, 500, 550, 600, 650)-072221201 22" Motors (HP: 600, 650, 700, 750, 800, 950, 1300)------072221201 27" Motors (HP: 850, 1000, 1100, 1200, 1400)---------------072220901 Tube- Motor Cooling- 42" Evaporator 18" Motors (HP: 280, 350, 400, 450, 500, 550, 600, 650)-072223501 22" Motors (HP: 600, 650, 700, 750, 800, 950, 1300)------072223501 27" Motors (HP: 850, 1000, 1100, 1200, 1400)---------------072220901 Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 21
Unit Assembly Components 1988-2002 Front View- Main Components 36" & 42" Condenser, Continued Ref # Qty. Description--------------------------------------------Part No. 235 1 Tube- Motor Cooling- 36" Evaporator 18" Motors (HP: 280, 350, 400, 450, 500, 550, 600, 650)-072221301 22" Motors (HP: 600, 650, 700, 750, 800, 950, 1300)------072221301 27" Motors (HP: 850, 1000, 1100, 1200, 1400)---------------072221001 Tube- Motor Cooling- 42" Evaporator 18" Motors (HP: 280, 350, 400, 450, 500, 550, 600, 650)-072223601 22" Motors (HP: 600, 650, 700, 750, 800, 950, 1300)------072223601 27" Motors (HP: 850, 1000, 1100, 1200, 1400)---------------072220701 236 1 Flange thru 6/97--------------------------------------------070290301 7/97 to 2002----------------------------------------074614801 237 1 O'Ring----------------------------------------------------735073629 238 2 Screw-----------------------------------------------------735033851 239 1 Tube- Motor Cooling 18" Motors (HP: 280, 350, 400, 450, 500, 550, 600, 650)-070269401 22" Motors (HP: 600, 650, 700, 750, 800, 950, 1300)------070264501 27" Motors (HP: 850, 1000, 1100, 1200, 1400)---------------070206050 240 1 Tube------------------------------------------------------070369301 241 1 Filter Drier Assembly 18" Motors (HP: 280, 350, 400, 450, 500, 550, 600, 650)-070024501* 22" Motors (HP: 600, 650, 700, 750, 800, 950, 1300)------070024501* 27" Motors (HP: 850, 1000, 1100, 1200, 1400)---------------070024502* 243 1 Motor Cooling Flange 18" Motors (HP: 280, 350, 400, 450, 500, 550, 600, 650)-744341501 22" Motors (HP: 600, 650, 700, 750, 800, 950, 1300)------744341501 27" Motors (HP: 850, 1000, 1100, 1200, 1400)---------------775226601 244 2 Gasket---------------------------------------------------070199014 246 4 Screw-----------------------------------------------------735017319 249 1 Tube- units with shell & tube oil cooler----------070365101 Tube- units with plate-to-plate oil cooler---------074778301 250 1 Liquid Injection Assembly---------------------------070023821 (for components see Liquid Injection Detail) 251 2 Screw-----------------------------------------------------735033846 253 1 Tube- 36" Evaporator--------------------------------070367101 36" Evaporator--------------------------------072244101 254 1 Tube- Motor Cooling 18" Motors (HP: 280, 350, 400, 450, 500, 550, 600, 650)-072126602 22" Motors (HP: 600, 650, 700, 750, 800, 950, 1300)------072126601 27" Motors (HP: 850, 1000, 1100, 1200, 1400)---------------072126601 257 2 Check Valve--------------------------------------------735040326 259 1 Tube- w/hot gas only---------------------------------070208097 260 1 Tube------------------------------------------------------070083601 261 1 Tube- units with shell & tube oil cooler----------070373301 261 1 Tube- units w/plate-to-plate oil cooler 074778101 262 3 Tube 070208035 263 5 Elbow 041117106 282 1 Tube- Pilot Valve 070140131 283 1 Reducer 041116611 290 1 Line- Motor Drain 744425301 292 1 T Assembly 735061444 326 3 Screw 735032732 327 3 Nut 040499805 350 6 Relief Valve Elbow- Cond. & Evap. 735031239 950 1 Main Liquid (King) Valve 735039809 951 1 King Valve Gasket 070199106 952 1 Motor Cooling Shut Off Valve 735039929 *For Filter Drier Assembly Components see Motor Cooling Filter Drier Components Section Condenser Relief Valve Cond Size Ref. Press. Relief Valve All 225 PSI (Std) 735045829 All 250 PSI 735045824 All 275 PSI 735045826 All 300 PSI 735045834 Evaporator Relief Valve Size Ref. Pressure Water Press. Relief Valve All 180 PSI (Std) 150 PSI (Std.) 735045811 All 225 PSI 250 PSI 735045840 Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 22
Unit Assembly Components 1988-1996 Shell & Tube Oil Cooler Components Ref # Qty. Description---------------------------------------Part Number 14 2 Adapter---------------------------------------------070296601 16 2 Sealing Ring--------------------------------------736017604 Complete Ass'y -------------------------------------------------------072102201 Connection Head -------------------------------------------------------070083101 Return Head -------------------------------------------------------070083201 Head Gasket (2) -------------------------------------------------------070199401 Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 23
Unit Assembly Components 1988-2002 Ref# 241: Motor Cooling Filter Drier Assembly- Parts Detail 18" & 22" Motors HP: 280, 350, 400, 450, 500, 550, 600, 650, 700, 750, 800, 950, 1300 27" Motors HP: 850, 1000, 1100, 1200, 1400 Ref # Qty. Description-------------------Part Number 1 1 Ball Valve----------------------036562904 2 1 Tube-----------------------------070208020 3 1 Tube through 9/99--------------070208035 10/99 to 2002-------------350144201 4 2 T----------------------------------041117925 5 4 Filter Drier Line---------------735902101 6 1 Reducer------------------------041116611 7 2 Filter Drier--------------------- through 9/99--------------021057417 10/99 to 2002-------------735028827 8 1 Check Valve------------------- through 9/99--------------735040326 10/99 to 2002-------------735040332 Ref # Qty. Description-------------------Part Number 9 1 Tube through 9/99--------------070206020 10/99 to 2002-------------070206037 10 1 Tee------------------------------041117929 The following no longer used as of 9/99: 11 1 Valve Core---------------------026541100 12 1 Valve Fitting-------------------071100801 13 1 Valve Cap----------------------032943500 Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 24
Unit Assembly Components 1988-1996 Front View- Part Two Shell & Tube Oil Cooler Units Insulation, Brackets, Hardware Ref # Qty. Description-------------------------------Part Number 4 1 Complete Oil Pump Assembly------- 070019255 11 2 Oil Cooler Bracket-----------------------070466101 14 4 Strap- Oil Cooler-------------------------735057281 15 1 Oil Cooler----------------------------------072102201 17 8 Screw---------------------------------------000164500 18 11 Nut------------------------------------------040499901 19 11 Lockwasher-------------------------------048164808 20 8 Washer-------------------------------------735043230 21 10 Washer-------------------------------------040500311 22 10 Lock Washer------------------------------048164814 24 8 Screw---------------------------------------735033847 28 1 Clamp--------------------------------------040971308 29 1 Screw---------------------------------------735032727 35 8 Screw---------------------------------------000861000 36 8 Washer-------------------------------------040500316 37 4 Washer-------------------------------------048164812 38 4 Nut------------------------------------------040499906 49 4 Vibration Mount--------------------------735970805 54 12 Washer-------------------------------------735043211 55 16 Screw---------------------------------------735033878 56 4 Lock Washer-----------------------------048164816 57 12 Nut------------------------------------------735029608 190 Insulation Adhesive---------------------000986000 195 42 sq. ft. Insulation- Suction Line----------------047662050 196 10.3 ft. Insulation- Tube--------------------------026218800 198 6.5 ft. Insulation- Tube--------------------------047351700 199 10.5 ft. Insulation- Tube--------------------------047352000 Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 25
Unit Assembly Components 1988-2002 Oil Pump Piping Top View 247 Front View Oil Pump 257 262 Ref # Qty. Description-------------------Part Number 206 2 Screw---------------------------735033846 214 1 O'Ring---------------------------735073649 215 1 Flange--------------------------735055290 247 1 Tube-----------------------------070359601 257 2 Check Valve-------------------735040326 262 1 Tube-----------------------------070208035 285 1 Tube----------------------------- Until 5/98-------------------070211060 6/98 and later-------------070211065 286 1 Elbow---------------------------041117110 287 1 Tube- Vent Drain-------------070365601 288 1 Tube- Vent Drain-------------070962701 289 1 Coupling------------------------735044222 293 1 Reducer------------------------041116528 296 1 Tube- Drain 30" Condenser------------070837402 36" & 42" Condenser----070837401 Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 26
Unit Assembly Components 1988-1996 Refrigerant Cooled Oil Circuit Piping (optional) Shell & Tube Oil Cooler Diagrams 672 Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 27
Unit Assembly Components 1988-1996 Refrigerant Cooled Oil Circuit Piping (optional) Shell & Tube Oil Cooler Components Refrigerant-Cooled Oil Cooler Ref # Qty. Description-----------------------------Part Number 268 1 Pipe Assembly-------------------------072102404 655 1 Tube- Refrigerant Return------------072204301 656 2 Ball Valve--------------------------------036562904 657 1 Tube- Refrigerant Return------------072204401 659 1 Strainer-----------------------------------735030501 660 2 Tube--------------------------------------070208078 661 1 Oil Temp. Control Ass'y--------------070023701* 662 2 Adapter-----------------------------------735044361 663 1 Elbow-------------------------------------041117106 664 2 Tube--------------------------------------070208020 665 2 Seal Ring--------------------------------736017604 670 1 Tube- Refrigerant Return------------071160601 671 1 Tube--------------------------------------070208102 672 1 Tube--------------------------------------070208206 673 1 T-------------------------------------------041117984 674 1 Tube- Refrigerant Supply------------071294101 * Oil Temperature Control Ass'y Detail Ref # Qty. Description----------- Part Number 1 1 TXV- 12 Ton---------- 070301501 2 1 TXV Tube-------------- 070725801 3 2 T------------------------- 041117809 4 1 Tube-------------------- 070206052 5 1 Orifice------------------ 070263101 6 2 Reducer---------------- 041116611 7 1 Tube-------------------- 070263001 Centrifugal Chiller; PE126, PEH126, PE550-1200 Rev. AB 04/2016 RPL 571137 /Page 28