Similar documents
SOLVENT MARKET. Global Trends & Forecast To MarketsandMarkets

Module 6: Chemical Resistance

Table of CONTENTS AB AB AB-138 (FDA) AB BLAST AB

Recycling with ECO-FLEX RTPV Thermoplastic Elastomer

Physical Properties. Temperature Limits. Durometer 60 +/-5. Average Elongation 350% Specific Gravity 1.50 Polymer Content 20% -20 o F to +212 o F

Series PVI/PVIF. Standard and Full Port Eccentric Plug Valves Conforming to AWWA C517

ÍNDICE FICHAS TÉCNICAS

O-Rings & Circlips Catalogue

Reach. Catalogue 01/2014. Fisatech s.r.o., Hlavná 361/53, Z. Teplica, tel.: ,

Datasheets - General Purpose Elastomers

Ensolite IR41. Chrysler Chrysler MSAY 516 Type 1 Exception to 25% compression deflection Meets at thicknesses of (1/8 ) (3.

VSI. Series BFII WATERWORKS. BUTTERFLY VALVES CONFORMING TO AWWA C504 Replaceable Seated 24-Inch and Greater Butterfly Valve

Smith-Blair OMNI Coupling System Advantages:

Pollutant Industry Impact. Status. VOCat RCO catalysts. VOC, Wood products coatings. Reduces natural gas consumption 50% lower gas.

O RINGS, GASKETS, DIAPHRAGMS SIZING GUIDE FDA AND USP CLASS VI

Sealing Elements. Technical Handbook O-rings. 22. On-line tools - Conversion Tables

PVC SCHEDULE 40 FITTINGS

Halogen Free, Flame-retardant Polyether based TPU

Safety Contact Strips. Safety Contact Strips

Table 1. INCIDENCE RATES 1 BY INDUSTRY AND CASE TYPES

Monarch. Monarch #5013. General Info

Monarch #5032. Product W L T W L T

Quant Briefing: Revenues, Earnings, & Margins

Quant Briefing: Revenues, Earnings, & Margins

The Stability of Sulfur Compounds, Low Molecular Weight Gases, and VOCs in Four Air Sample Bag Materials

Slide-Lag. REPLACEABLE Pulley Lagging for Drive Pulleys Superior Traction for Conveyor and Elevator Systems

Ensolite IV1. Formerly MILR6130-C

Paraplex Resins for Industrial Coatings

O RINGS FDA AND USP CLASS VI

MIL- DTL D TY 2 - Compressed Sheet with Aramid Fibers/SBR Binder

INDUSTRIAL TAPE PRODUCT GUIDE

Monarch #5031. Product W L T W L T

POLYCAST CELL CAST ACRYLIC Solutions for Aerospace

Piston Seals Wipers O-Rings & Kits Custom Parts Specialty Parts Services Wear Guides Rod Seals UL Compounds QUALITY VALUE SERVICE.

Nessol Solvents Sustainable solutions from your partner in solvents

TABLE OF CONTENTS. Remember ROGERS for Rubber & Plastic page 2

FluoroelastomerIs the Best Material for Water Header Gasket of Diesel Engine

LF(M) High Viscosity Filter Assemblies. hyprofiltration.com/lf

O-RINGS METRIC SIZES AVAILABLE

PETSEALS. Material TENSILE STRENGTH (KG/CM 2 ) ELONGATION(%) TEMPERATURE RANGE( ) MATERIAL %MAX HRSX NITRILE 70 (NBR 70) ~100 70H x

Best Global Brands 2018

Joint Press Release of BASF, Arsenal and Foosung. BASF acquires Novolyte Technologies. April 26, 2012

Quick Splice II. 35 kv Molded Rubber Inline Splicing Kit Data Sheet. 2. Applications. 1. Product Description

QCB Thermoplastic Bearing Units

This presentation focuses on Biodiesel, scientifically called FAME (Fatty Acid Methyl Ester); a fuel different in either perspective.

full of energy DID YOU KNOW? The CC Apex is ergonomically designed to minimize push/pull and reduce work-related injuries

TDI-terminated polyester based prepolymer

BS-40 BS-25 BS-27* BS-07* BS-10* BS-12* BS-22* BS-02* BS-15 BS-08 BS-39

Generator Start-battery Application

ÚÄÄÄÄÄÄÄÄÄÄ ÚÄÄÄÄÄÄÄÄÄÄ ³ METRIC ³ ÀÄÄÄÄÄÄÄÄÄÄÙ TT-T-306E May 28, 1993 SUPERSEDING TT-T-306D December 31, 1992 FEDERAL SPECIFICATION

TECHNICAL SPECIFICATIONS

Elastomer Guide. Butyl Rubber (IIR) General Information. Cure system - Sulfur-Cured. Service Temperatures. Other Common Variations

Quick Splice II 5451R. 25/28 kv Molded Rubber Cable Repair Splicing Kit Data Sheet. 1. Product Description. 2. Applications

Model 7706 Reducing Coupling. Deg. Axial Displacement

CHEMICAL RESISTANCE

LMT-55. Let the Evolution Begin. non-dehp laboratory and vacuum tubing

reliable Wher ver gears and shafts turn, Timken innovation is in action. From equipme t mining deep in the earth to exploration in the

Material Handlinq Components

Cargo Handling Sheet. Methyl Ethyl Ketone (MEK) Document date: 3 June 2015 Revision 3

Good for the USA. Buyer s Guide Thomas J Johnson. Helping Americans choose the global products that support American jobs.

Products of integrity from people of integrity. w w w. n e w m a n g a s k e t. c o m

Autonomous Vehicles: A look into the past - a look into the future

Conley Product Bulletin

CRN. Series 740 Safety Valves. 4 Aquatrol Safety Relief Valves

Fuel Resistant. Punishing Conditions. Supreme Production.

INDUSTRIAL LUBRICANTS THAT CAN REDUCE PRODUCTION DOWNTIME

DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, CROSSLINKED CHLORINATED POLYOLEFIN, FLEXIBLE

Please see the judging schedule for dates and times if you would like to do face to face judging.

SOLO KICK SCOOTER -MANUAL-

3PC TONNEAU COVER WITH SPORTS BAR INSTALLATION INSTRUCTIONS

Liquid Propane Autogas

52 INDUSTRIAL HOSE. Biofuel Petroleum Suction & Discharge Hose. T650AH 150 PSI Oil Discharge Hose PETROLEUM HOSE INDUSTRIAL RUBBER HOSE"

INNOVATION INSIDE. SENSORS & TPMS COMPONENTS FLUID CONTROL & HIGHLY ENGINEERED VALVES TIRE HARDWARE, REPAIR & AIR ACCESSORIES

COMPRESSED SHEET GASKET MATERIAL AVAILABLE MATERIALS

Green Polymeric Materials Inc.

CRN. Series 740 Safety Valves. Aquatrol Safety Relief Valves

Model HD20F. DATA SHEET Specifications & Performance. Non-Metallic Flap Valve Design Level 1. Certified Quality

Available End Connections & Size Range

Precision and Saturn Series Nozzles Genuine Nordson nozzles provide superior pattern placement, bead consistancy and cutoff.

Chemical Protective Clothing Standards Update. Ulf Nyström

Couplings. Ductile Iron Housing Specifications. Coatings. Gasket Specifications. Bolt/Nut Specifications

Customers' Photes

Flame Resistance, LOI 95 >

High Surface Area Silica. High Performance Tread. STRUKTOL SCA 98 (Tetrasulfide)

Manway Gaskets for the Rail Industry

SATURN KICK SCOOTER -MANUAL-

Significance of Each Test. 1. Color (Visual)

CRN. Series 560/570 Safety Valves. 12 Aquatrol Safety Relief Valves

SCHEDULE 80 PVC PRESSURE FITTINGS L80P EFFECTIVE JULY 1, 2017 REVISED PRODUCTS PRICE LIST INCLUDES: SCHEDULE 80 PVC 1/4 TO 12

ECCENTRIC PLUG VALVES

Testing based on UL 1667 (Tall Institutional Carts for Audio, Video and TV-Type Equipment)

SERIES GVI AWWA C509/C515 RESILIENT SEATED GATE VALVES 2-48

DETAIL SPECIFICATION SHEET INSULATION SLEEVING, ELECTRICAL, HEAT SHRINKABLE, POLYOLEFIN, FLEXIBLE, CROSSLINKED

High Temperature Marker Tag

P17 Tempra Pro plugs, mobile sockets, fixed sockets, surface mounting sockets and appliance inlets - IP 66/67-63 A A

SERIES CVI AWWA C508 SWING CHECK VALVES 2-48

Technical Data Sheet SUPER SAP CLR Epoxy System Clear, General Purpose Liquid Epoxy Resin

kysmall, Yet Flexible

CRC Report No. E-79 COORDINATING RESEARCH COUNCIL, INC MANSELL ROAD SUITE 140 ALPHARETTA, GA 30022

VentureClad Insulation Jacketing Tapes 1577 Series

Transcription:

. Barefoot! Material, Warranty and Specifications industrial ergonomic flooring Why Rubber. Tires are made of rubber, not plastic, for a good reason. Performance begins with the material. Rubber is resilient, elastic and durable. It is ideal for making athletic shoes, tires and floor matting. Barefoot uses highest quality rubber- free of clay or filler- that meets or exceeds Clean room Classification 1000. TRUE: Barefoot endured 280 cycles of compression and release per minute for sixty hours. When one million cycles were completed the sample was sent back to the lab and was found to have lost no measurable amount of mechanical performance. Versions: Solid Drain Material Grades: Standard: High-quality automotive grade EPDM with excellent physical properties in non-oily environments. Nitrile: Specially formulated oil-resistant rubber. ESD: Certified to be 1 x 10 4 th to 1 x 10 6 th ohms surface to ground resistance. 8-Year Warranty Warranty: Barefoot will retain its exceptional ergonomic performance for 8 years. Oil and Chemical Resistance / Nitrile compound: In areas that are exposed to grease and oil, use Nitrile rubber. Nitrile rubber (acrylonitrile butadiene rubber) has resistance to aliphatic and aromatic hydrocarbons, acid and alkali. Examples include motor oil, hydraulic oil and petroleum greases and paint thinner. Nitrile rubber performs poorly when exposed to oxygenated solvents and chlorinated hydrocarbons. Examples include MEK (methyl ethyl ketone) methylene chloride, xylene and bleach. Please inquire about specific applications. Mats in oily areas must be properly maintained. Warranty is pro-rated from time of purchase. Warranty assumes usage of two shifts, five days a week. Warranty does not cover misuse of product such as heavy fork-lift traffic, spiked shoes or lack of maintenance. Specifications Material Specifications: Specific gravity ASTM 297: 1.18. Tear resistance ASTM D-624: 150 psi, min; Tensile strength ASTM D-412: 1300 psi, min; Elongation at break ASTM D-412 500% min; Shore A hardness ASTM D-2240 45-55; Compression set ASTM D-395: 15%. Flame resistance: Exceeds FMVSS-302. Certified clean room: Class 1000. Physical Specifications. Weight: 1.3 lbs per square foot. Height: 15.5mm. Lengths and widths: +/- 1%. Custom cutting: specified to the inch; cut within +/- 1. Freight FOB Geneva, OH 44041. Made in OHIO, USA Barefoot Made by Beagle I, Inc. Phones: 213-229-0830, 800-860-8448. www.barefoot-flooring.com

Barefoot Sizes Schedule 200 6: Size Sq. Ft. Size Sq. Ft. Size Sq. Ft. Size Sq. Ft. Size Sq. Ft. 2 x 3 6 3 x 4 12 4 x 6 24 6 x 4 24 8 x 3 24 2 x 6 12 3 x 6 18 4 x 9 36 6 x 6 36 8 x 6 48 2 x 9 18 3 x 8 24 4 x 12 48 6 x 8 48 8 x 9 72 2 x 12 24 3 x 10 30 4 x 15 60 6 x 10 60 8 x 12 96 2 x 15 30 3 x 12 36 4 x 18 72 6 x 12 72 8 x 15 120 2 x 18 36 3 x 14 42 4 x 21 84 6 x 14 84 8 x 18 144 2 x 21 42 3 x 16 48 4 x 24 96 6 x 16 96 8 x 21 168 2 x 24 48 3 x 18 54 4 x 27 108 6 x 18 108 8 x 24 192 2 x 27 54 3 x 20 60 4 x 30 120 6 x 20 120 8 x 27 216 2 x 30 60 3 x 22 66 4 x 33 132 6 x 22 132 8 x 30 240 2 x 33 66 3 x 24 72 4 x 36 144 6 x 24 144 8 x 33 264 2 x 36 72 3 x 26 78 4 x 39 156 6 x 26 156 8 x 36 288 2 x 39 78 3 x 28 84 4 x 42 168 6 x 28 168 8 x 39 312 2 x 42 84 3 x 30 90 4 x 45 180 6 x 30 180 8 x 42 336 2 x 45 90 3 x 32 96 4 x 48 192 6 x 32 192 8 x 45 360 2 x 48 96 3 x 34 102 4 x 51 204 6 x 34 204 8 x 48 384 2 x 51 102 3 x 36 108 4 x 54 216 6 x 36 216 8 x 51 408 2 x 54 108 3 x 38 114 4 x 57 228 6 x 38 228 8 x 54 432 2 x 57 114 3 x 40 120 4 x 60 240 6 x 40 240 8 x 57 456 2 x 60 120 3 x 42 126 4 x 63 252 6 x 42 252 8 x 60 480 2 x 63 126 3 x 44 132 4 x 66 264 6 x 44 264 and so on. 2 x 66 132 3 x 46 138 4 x 69 276 6 x 46 276 2 x 69 138 3 x 48 144 4 x 72 288 6 x 48 288 2 x 72 144 3 x 50 150 4 x 75 300 6 x 50 300 2 x 75 150 3 x 52 156 4 x 78 312 6 x 52 312 2 x 78 156 3 x 54 162 4 x 81 324 6 x 54 324 2 x 81 162 3 x 56 168 4 x 84 336 6 x 56 336 2 x 84 168 3 x 58 174 4 x 87 348 6 x 58 348 2 x 87 174 3 x 60 180 4 x 90 360 6 x 60 360 2 x 90 180 3 x 62 186 4 x 93 372 and so on. 2 x 93 186 3 x 64 192 4 x 96 384 2 x 96 192 3 x 66 198 4 x 99 396 2 x 99 198 3 x 68 204 4 x 102 408 9, 10 and 12 widths are available 2 x 102 204 3 x 70 210 4 x 105 420 at special pricing. 2 x 105 210 3 x 72 216 4 x 108 432 2 x 108 216 3 x 74 222 4 x 111 444 Custom work is available. 2 x 111 222 3 x 76 228 4 x 114 456 2 x 114 228 3 x 78 234 4 x 117 468 2 x 117 234 3 x 80 240 4 x 120 480 2 x 120 240 3 x 82 246 3 x 84 252 Part Numbering 3 x 86 258 1. Select type of material: Standard, Nitrile or ESD (S, N or E) 3 x 88 264 2. Select Surface Solid or Drain. (S or D) 3 x 90 270 3. Indicate size 3 x 92 276 4. Part Number Type-Surface -Size Examples: 3 x 94 282 SBFD23 Standard (Barefoot) Drain 2 x 3 3 x 96 288 NBFD412 Nitrile (BF) Drain 4 x 12 3 x 98 294 SBFS23 Standard BF Solid 2 x 3 3 x 100 300 NBFD860 Nitrile BF Drain 8 x 60 3 x 102 306 EBFS6100 ESD BF Solid 6 x 100 3 x 104 312 3 x 100 318 3 x 108 324 Footnotes: 3 x 110 330 1. 2 x 3 and 3 x 4 are sin gle modules that do not need bonding. 3 x 112 336 2. 2 x 3 and 3 x 4 modules interlock to make runners and blocks. 3 x 114 342 3. For long runners and large blocks, we recommend bonding. 3 x 116 348 4. Bonding is done by taking a separate s trip of rubber and Permanent ly sealing the modules from both the top and the bottom.

Who buys Barefoot! Government: Barefoot has been deemed The Gold Standard for the AAFES (Army/Air Force Exchange Service). Private sector: the companies below have bought Barefoot within the last two years. Notice that most share one common element: they have a trained and skilled work force, whose productivity and well-being of employees are very important to management. Company Industry Alcoa Metals Amazon.com On-line retailing BMW Automotive assembly Boeing Aerospace Delphi Automotive components Disney World Theme parks DuPont Chemicals Eli-Lilly Pharmaceuticals GE Engines Aerospace GE Transportation Locomotives General Dynamics Defense builder General Motors Transportation Goodyear Rubber and tires Google IT Harley-Davidson Motorcycle manufacturing H J Heinz Food processing H-P Electronics IBM Electronics J C Penney Catalogue order fulfillment Lear Aircraft Levolor Home furnishing L. L. Bean Sporting goods / Apparel Los Angeles Times Newspaper publishing Maytag Appliances Mayo Clinic Medical facilities Michelin Tires Monsanto Agricultural chemicals New York Transit Authority Toll booths Nissan Auto manufacturing Pepperidge Farms Specialty foods RR Donnelly Publishing SC Johnson Consumer personal products Sony Electronics Consumer electronics Stanley Tool Hand tools Steelcase Office equipment Toyota Motor Sales Distribution centers Tree Top Specialty foods Visteon Automotive parts Xerox Office equipment

Barefoot and the Competition The Making of SmartCells by A Brief History Back in 1987 SATECH introduced a surface for fall protection in playgrounds. The matting, however, could not pass the Consumer Product Safety Council standards for falls over eighteen inches. Then in 1990, SATECH claimed their mat was for landing helicopters. That did not exactly work for the industry. And now, in 2007, the same mat is claimed to be for people who stand. Playgrounds, helicopters or people? The Patents: SmartCells has five U.S. patent numbers boldly embossed on its surface. A patent search revealed that none of the patents are related to people standing. All of the patents are related to playgrounds and helicopters. See patents 5,013,029, 4,998,717, 4,846,457, 4,948,116and 4,727,697. No claims related to people standing. Optimum Compressibility: SmartCells claims it has optimum compressibility. That number is said to be between 0.6 and 0.9 Megapascals. (www.satechinc.com/the satech story). Claims of perfection should draw attention. Doing the homework, we discovered that a megapascal can be converted into something we all understand: Pounds per square inch. The conversion is simple: From: Megapascals (MPa). To: Pounds per Square Inch. Multiply by: 145.05. The calculation equals 87 to 130 pounds per square inch. Who can exert 100 lbs per square inch? Industrial ergonomic flooring. 800-860-8448 Our Patents are related to people. Our science was done at Caltech. Barefoot