IRONWORKERS The Piranha Model P-50 features Automatic Urethane Hold Downs on the Punch Stripper and Bar, Plate and Angle Shear. This assures precise cuts and longer punch and blade life. Complete Punching Attachment with split dove tail mounting 14 Punch and Die sets 8" bending Attachment with split dove tail mounting Automatic Urethane Hold Down on the Punch Stripper and on Angle, Plate and Bar Shear Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral Remote Electric Foot Switch that can be connected at either end of the machine Electric Limit Switches that can be set for stroke control when using foot control Set of Round Bar Knives [2 way] (customers choice to 1-1/2") Set of 12.125 Knives [4 way] CAPACITIES & SPECIFICATIONS: MODEL P-50 50 TON Throat 8" Open Height 13-1/2" Depth Closed 9-1/4" Work Stations From Floor 42" Height w/o Die Block 10.5 Stroke Length 4-1/4" System R/V 2600 PSI Round(Min. to Max.) Square (Min. to Max.) 1/4" to 1-1/2" 1/2 " to 1" Motor STD. 230/460 1800 rpm 10 HP 3 Phase 50 Tons Max. 13/16" thru 3/4" Material *5" thru 1/8" Max. Hole 10"X17" *Special Tool Platen Table Size (D-W) (NET) W-L- 24 "x66"x60" H Bending Attachment 8" Strokes Per Minute Optional Lengths Available Weight (NET) lbs 2600 60 @ 1/2" Angle Shear (Max.) w/special Blade 56 2-3/4" x 4" x 1/4" 15" Long 3/4" x 10" 5/8" x 15" 5" x 5" x 3/8" 4" x 4" x 1/2"
The Piranha Model P-70 extends your work week. putting more power, more precision on the job, day after day. The P-70 features Automatic Urethane Punch Strippers and Bar, Plate and Angle Shear Hold Downs to assure precise cuts and longer punch and blade life. Complete Punching Attachment with split dove tail mounting 12" bending Attachment with split dove tail mounting Automatic Urethane Hold Down on the Punch Stripper and on Angle Plate and Bar Shear Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral Remote Electric Foot Switch that can be connected at either end of the machine Electric Limit Switches that can be set for stroke control when using foot control Set of Round Bar Knives [2 way] (customers choice to 2) Set of 14.50 Knives [4 way] Extra Blank Knife to extend shear to 18" CAPACITIES & SPECIFICATIONS: MODEL P-70 70 TON Throat Depth 10" Open Height 15" Closed Height w/o Die Block 10-1/8" Work Stations From Floor 42" 15 2600 Stroke Length 4-7/8" 1/4" to 1-1/2" 1/2 " to 1" 70 Tons 1-3/16" thru 3/4" *4-1/2" thru 3/16" 12"X21" 31 "x79"x64" 15 HP 3 Phase 75 3-1/2" x 5" x 3/8" 18" Long 1" x 6" 3/4" x 12" 1/2" x 18" Bending Attachment 12" Optional Lengths Available Weight (NET) lbs 4250 Strokes Per Minute 30 @ 3/4" Angle Shear (Max.) 5" x 5" x 1/2"
The Piranha P90 is the workhorse of the industry. Its six (6) workstations are designed for ease of operation featuring Automatic Material Hold Downs and Punch Strippers. If your fabrication requirements include punching high tonnage holes and shearing ¾" or thicker plate, the P90 is the ideal machine for you. Complete Punching Attachment with split dove tail mounting 12" bending Attachment with split dove tail mounting Automatic Urethane Hold Down on the Punch Stripper and on Angle, Plate and Bar Shear Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral Remote Electric Foot Switch that can be connected at either end of the machine Electric Limit Switches that can be set for stroke control when using foot control Set of Round Bar Knives [2 way] (customers choice to 2) Set of 16.625 Knives [4 way] Set of 20.5" Knives [4 way] (instead of Round Bar Knives and 16.625" Knives) Extra Blank Knife to extend shear to 20.5" CAPACITIES & SPECIFICATIONS: MODEL P-90 90 TON Throat Depth Closed Height w/o Die Block 12" Open Height 15-1/2" 10-1/4" Work Stations From Floor 44" Stroke Length 5-1/4" 32 2750 1/2" to 2" 1/2 " to 1-3/8" 15 HP 3 Phase 90 Tons 1-1/8" thru 1" *5" thru 3/16" 14-1/2"X21" 95 4" x 6" x 3/8" Bending Attachment 12" 20-1/2" Long 35 "x90"x66-1/2" 1" x 12" 3/4" x 18" 1/2" x 20" Optional Lengths Available Weight (NET) lbs 5800 Strokes Per Minute 40 @ 3/4" Angle Shear (Max.) 6" x 6" x 5/8"
The Piranha P120 is the largest single operator ironworker that Piranha has manufactured. Piranha's 50, 70 and 90 ton models have long dominated the market, but the industry has demanded an extension of that line with increased capacities. The P120 has 120 tons of punching capacity and can punch a 1 1/2" hole in 1" material or a 5" hole in 1/4" material. If your fabrication requirements include additional capacities than the P90 offers, the P120 is the ideal machine for you. Complete Punching Attachment with split dove tail mounting 12" Bending Attachment with split dove tail mounting Automatic Urethane Hold Down on the Punch Stripper and on Angle, Plate and Bar Shear Front and rear 5 position joy stick controls (electric) with jog up & down, fast up & down, neutral Remote Electric Foot Switch that can be connected at either end of the machine Electric Limit Switches that can be set for stroke control when using foot control Set of Round Bar Knives [2 way] (customers choice to 2) Set of 16.625 Knives [4 way] Set of 20.5" Knives [4 way] (instead of Round Bar Knives and 16.625" Knives) Extra Blank Knife to extend shear to 20.5" CAPACITIES & SPECIFICATIONS: MODEL P-120 120 TON Throat Depth 12" Open Height 15-1/2" Closed Height w/o Die Block 10-1/4" Work Stations From Floor 44" 15 3500 Stroke Length 5-1/4" 1/2" to 2" 1/2 " to 1-3/8" 20 HP 3 Phase 120 Tons 1-1/2" thru 1" *5" thru 1/4" 14-1/2" x 21" 95 4" x 6" x 3/8" Bending Attachment 12" 35 " x 90" x 68-1/2" Optional Lengths Available Weight (NET) lbs 6200 20-1/2" Long 1" x 12" 3/4" x 18" 1/2" x 20" Strokes Per Minute 40 @ 3/4" Angle Shear (Max.) 6" x 6" x 5/8"
The Piranha Model PII-88 has dual-operator controls for the punch station and shear/coper stations and an Automatic Urethane Hold Down on the Plate and Angle Shear. Both ends of the machine can be operated independently of each other at the same time. A large, open punch station allows the use of a virtually unlimited range of standard accessories and special tooling, in addition to a 24" plate shear capacity. Complete Punching Attachment with stripper Front and rear 2 position joy stick controls (electric) Front and rear Remote Electric Foot Switches Front limit switch stroke control Set of Round Bar Knives [2 way] (customers choice to 1-1/2") Set of 20.625" Knives [4 way] Set of Blank Knives to extend shear to 24" Set of Angle Shear Knives [8 way top] [4 way bottom] Chip Buckets (coper end) Coupling Wrench Intergral Lifting Lug for instant portability CAPACITIES & SPECIFICATIONS: MODEL PII-88 88 TON Throat Depth 9" Open Height 14" Closed Height w/o Die Block 7-3/4" Work Stations From Floor 41" 7.5 3500 Stroke Length 7" 1/4" to 1-1/2" 1/2 " to 1" 88 Tons 1-1/16" thru 1" *5" thru 3/16" 11" x 38" 38 "x90"x72" Bending Attachment (optional) 18", 24", 36", or 48" Weight (NET) lbs 4700 Strokes Per Minute 19 @ 1" Angle Shear (Max.) w/special Blade 10 HP 3 Phase 56 2-3/4" x 4" x 1/4" 24" Long 3/4" x 8" 5/8" x 12" 1/4" x 24" 5" x 5" x 3/8" 4" x 4" x 1/2"
The Piranha Model PII-140 have dual-operator electric controls (foot pedal and joystick) for the punch stations and shear/coper stations. Also featured are Automatic Urethane Hold Downs on the Angle, Plate and Bar Shears. The large, open punch stations allow the use of a virtually unlimited range of standard accessories and special tooling. Complete Punching Attachment with stripper Automatic Urethane Hold Down on the Plate, Angle, and Bar Shear Front and rear 2 position joy stick controls (electric) Front and rear Remote Electric Foot Switches Front limit switch stroke control Set of Round Bar Knives [2 way] (customers choice to 2") Set of 14.5" Knives [4 way]: For PII-110 Set of 16.625" Knives [4 way]: For PII-140 Set of 20.5" Knives [4 way] instead of Round Bar Knives and 16.625" Knives: For PII-140 Extra Blank Knife to extend shear to 18" on PII-110 or 20.5" on PII-140 Set of Angle Shear Knives [2 way top] [4 way bottom] Chip Buckets (coper end) Coupling Wrench Intergral Lifting Lug for instant portability CAPACITIES & SPECIFICATIONS: MODEL PII-140 140 TON Throat Depth 20.5" Open Height 14" Closed Height w/o Die Block 7-3/4" Work Stations From Floor 44" 15 3700 Stroke Length 7" 1/2" to 2" 1/2" to 1-3/8" 140 Tons *1-3/4" thru 1" 5-5/16" 16" x 36" 38 "x120"x85" 20 HP 3 Phase 95 4" x 6" x 3/8" 20-1/2" Long 1" x 14" 3/4" x 18" 1/2" x 20" Bending Attachment (optional) 18", 24", 36", or 48" Weight (NET) lbs 11,930 Strokes Per Minute (Approx.) 24 @ 1" Angle Shear (Max.) 6" x 6" x 5/8"