pace saving structure Overview his direct mount cylinder is a high rigidity/small square air cylinder with excellent installation accuracy and multisurface direct mount. he square shaped body improves efficiency in the design stage. his cylinder meets needs such as small, high density and high precision in pneumatic system. eatures imple square design pace saving, simple and small square shape. witch integrated Proximity or reed switches are integrated. asy centering ocket and spigot on rod side enables easy alignment. Precise installation irect mount enables precise rod axis center parallelism and perpendicularity. hree types of mounting style hree types of mounting style such as rod side mounting, head side mounting and high rigid mounting types are available. wo lead wire directions ompact cylinder O,, 1, 2, eries variation 00 Product introduction 02 ariation and option selection table 03 afety precautions 04 ouble acting single rod type () 0 ingle acting extend type () ingle acting retract type (Y) ouble acting fine speed type () 2 ouble acting nonrotating type (M) 30 series common dimensions of types with switches 3 P*2 M2 wo switch lead wire directions such as axial and radial types. ompact cylinder pace saving structure 999
eries variation ompact cylinder eries eries eries variation P*2 M2 ariation ouble acting single rod type with switch ingle acting extend type with switch ingle acting retract type with switch ouble acting fine speed type with switch ouble acting nonrotating type with switch L Model no. JI symbol L Y YL L M ML ore size (mm),, 1, 2,,, 1, 2,,, 1, 2,,, 1, 2,,, 1, 2, tandard stroke length (mm) Mounting style 1 2 30 40 0 (ote 1) Min. stroke length (mm) 1 1 1 1 1 Max. stroke length (mm) 0 0 1 1 1 1 0 0 30 0 ustom stroke length (per mm) 1 1 1 1 1 : tandard, Option P*2 M2 ompact cylinder pace saving structure Rod end mounting type ead end mounting type : Option, igh rigid mounting type : ustom order, opper and P free P witch :ot available Page 0 2 30 00 01
P*2 M2 onvenient four surfaces installation hree types of mounting style are available with an easy operation. our surfaces direct mount is possible. mall, square shaped, and compact cylinder ( to ) hree types of mounting style lexible 4 direct installation surfaces 3 ide installation 2 Rod end Installation ( type only) (1) op surface installation (4) ead end installation etecting switch simply integrated 1 op surface installation (4 surfaces) 4 ead end installa ( type only) witch position adjustment is possible at the front wo types of detecting switch xial and radial lead wire directions rod side mounting type head side mounting type high rigid mounting type (3) ide installation witch simply installed without projection from the body. pace saving. (K2Y*/K3Y* excluded. ) (1) op surface installation (2) Rod end installation (3) ide installation (4 surfaces) (3 surfaces) (1) op surface installation (3) ide installation ccurate alignment with socket and spigot etecting switch asy position adjustment. ocket and spigot provided at bush section enables easy alignment. ( type only) 02
ariation and option selection table ode ccessory Option Port thread ariation ouble acting basic type ingle acting extend type ingle acting retract type onrotating type ith cylinder switch ine speed type P opper and P free type lean room specifications (exhaust treatment) lean room specifications (vacuum treatment) lean room specifications (exhaust treatment) lean room specifications (vacuum treatment) ustomized piston rod end form ylinder switch Rod eye Rod clevis 1 bracket 2 bracket ymbol lank Y M L P P P1 P2 P3 ** Listed on I Y 1 2 : Option : vailable (custom order) : vailable dipending on condition (consult with K) : ot available ode ariation Port thread Option ouble acting basic type ingle acting extend type ingle acting retract type onrotating type ith cylinder switch ine speed type P opper and P free type lean room specifications (exhaust treatment) lean room specifications (vacuum treatment) lean room specifications (exhaust treatment) lean room specifications (vacuum treatment) ustomized piston rod end form autions ote 1. If the size of the screw at the piston rod end is changed, this combination does not apply. onsult with K. ote 2. Refer to the "lean omponent ystem (catalog o. 033)" for clean room specifications P*. ote 3. P specifications are available as standard. (Required no indication for P ) ote 4: hen combining the clean specifications with the nonrotating type, the guide bar will slide separately from the piston rod. here are dust generating sections other than the piston rod, so this will be handled with separate symbols (P2 (exhaust treatment) and P3 (vacuum sweep)). <xample of model number> M L 1 K0 Model no. ariation Indicate symbols from left to right on the left table. Model no.: ompact cylinder Mounting style ore size o Y troke length Port thread type ariation: onrotating with switch fine speed type Mounting style : Rod end mounting type ore size : 1 mm Port thread type : Rc thread troke length : mm witch model no. : Reed K0 switch, lead wire 1 m witch quantity : 2 Option : one ccessory : one M L P P P1 ote 3 ote 3 ote 3 witch model no. ote 3 ote 3 ote 3 ote 3 ote 4 witch quantity ote 4 P2 P3 ** ote 1 ote 1 ccessory Option Indicate symbols from left to right on the left table. eries ariation and option selection table 03 P*2 M2 ompact cylinder pace saving structure
P*2 M2 Pneumatic components afety precautions lways read this section before starting use. Refer to Intro 1 for general details on the cylinder, and to Intro for details on the cylinder. ompact cylinder eries 1. ine speed type UIO Use with oilfree specifications. Lubrication may change characteristics. ssemble the flow control valve near the cylinder. djustments become unstable if assembled away from the cylinder. Use the 3/M, 3, M3/M, 3U eries speed control valve. enerally, the higher air pressure, and the smaller load pressure result in the more stable operation. Keep the load factor at 0% or less. table speed control is achieved with a meterout circuit. hen driving the single rod cylinder at fine speed with the operation direction set to PU, poppingout may occur if operation is started when load resistance is small. s a countermeasure, use (b), (c), or (d) circuit.ote that the (d) circuit is the most stable. a c PU: meterout PU: meterout PU: meterin PU: meterout b d PU: meterin PU: meterin PU: meterin/out PU: meterout esign & election (ote 2) hen installed vertically, the load will drop naturally if the meterin circuit is used. Use the meterout circuit in this case. peed control is unstable rops naturally when lowering (ote 3) onnect the peed control valve in the parallel with the following circuit. (ause of popping out) Reduce the flow rate to reach a fine speed at the exhaust side in a materout circuit. his results in the same pressure level on the both sides immediately after valve switched. he thrust caused by the differential of pressurized area of piston is applied to the PU direction and a poppingout of piston rod occurs. (uide for popping out occurrence) Popping out occurs when: the piston rod area x air pressure> load resistance. o not apply lateral load a cylinder. Install the cylinder to avoid the sliding guide to be twisted. he presence of load or resistance variation may result in unstable operations. Operation of a guide having a large difference in stationary and moving friction may become unstable. d peed adjustment method of PU operation of circuit: 1. et the speed with the x speed control valve 2. Lower the flow rate with the y speed control valve until popping out no longer occurs 3. Reconfirm speed void use with vibration. he product would be adversely affected by vibration and operation may become unstable. (ote 1) hen b, c and d are compared, d circuit operation is most stable. 04
eries 2 cylinders in parallel 3 or more cylinders in parallel 1. ommon UIO he cylinder may malfunction if a magnetic substance, such as a steel plate, is nearby. Move the magnetic substance to at least 3.mm from the cylinder. (ame clearance for all bore sizes) hen installing cylinders adjacently, provide the following installation pitch to prevent switches from malfunctioning. djacent conditions orizontal installation ertical installation Install the switch on the opposite side of the cylinder at the side. ertical installation Install switch at side of adjacent cylinder. orizontal installation ertical installation 2. ingle acting /Y UIO witch witch model no. K0, K K2, K3 K0, K K2, K3 K0, K K2, K3 K0, K K2, K3 K0, K K2, K3 K0, K K2, K3 K0, K K2, K3 K0, K K2, K3 K0, K K2, K3 K0, K K2, K3 o not leave the single acting cylinder in the pressurized state. If left pressurized, the piston rod may not return with spring power when pressure is released. Installation & djustment 1 2 2 29 3 1 2.. 21 2.. 2 3.. 1 21 2 29 3 19 2. 13. 22 29. 13. 2 3.. 4. 0. 4. 4 33 40.. 41 0. 1. 4.. 2 33 41 4 34 44. 1. 42 1 9. 1. 3.mm and over 4. 1. 3. ine speed type Magnetized device such as steel plate, etc. Remarks Unit: mm ote that when the cylinder is installed, the switch position cannot be adjusted if the driver length is longer than the dimension. ote that when the cylinder is installed, the switch position cannot be adjusted if the driver length is longer than the dimension. UIO djust the core, etc., so lateral load is not applied to the cylinder. djust and install so the sliding guide is not twisted. Operation may become unstable due to fluctuations and load resistance. Operation of a guide having a large difference in stationary and moving friction may become unstable. P*2 M2 1. onrotating type M UIO o not place fingers between the baffle nonrotating plate and cylinder tube. ingers may get caught between the nonrotating plate and cylinder tube when the piston rod is pulled in. o not place fingers here. uring Use & Maintenance 0 ompact cylinder pace saving structure
P*2 M2 pecifications escriptions ore size mm ctuation orking fluid Max. working pressure MPa Min. working pressure MPa ithstanding pressure MPa mbient temperature Port size troke tolerance orking piston speed mm/s ushion Lubrication llowable energy absorption J troke length 1 2 L (with switch) 1 2 ouble acting ompressed air 0. 0.1 0.1 1.0 to 0 (no freezing) M Rc1/ +1. 0 0 to 00 Rubber cushioned ot required (when lubricating, use turbine oil lass 1 IO.) 0.00 0.03 0.1 0.1 0.19 0. tandard stroke length (mm),, 1,, 2, 30,, 1,, 2, 30, 40, 0 Min. stroke length with switch Model L L/ mm ote 1: ustom stroke length is available per 1mm increment. ore size 1 2 1 2 ompact cylinder, double acting single rod type eries ore size:,, 1,, 2, JI symbol Max. stroke length (mm) 0 0 ouble acting Min. stroke length (mm) 1 1 color indicator type 2 color indicator type ith preventive maintenance output K* K* K*Y K*Y K*Y* K*Y* 1 1 1 1 0
witch specifications 1 color/2 color indicator Proximity 2wire Proximity 3wire Reed 2wire escriptions K2/K2 K2Y/K2Y K3/K3 K3P/K3P K3Y/K3Y (ustom order) K0/K0 K/K pplications Output method Power voltage Programmable controller Programmable controller, relay P output PP output P output to 2 Programmable Programmable controller, relay controller, relay I circuit (w/o indicator light), serial connection Load voltage Load current to 30 to m (ote 1) 30 or less 0m or less /24 to 0m 1 to m //24 0m or less 1 m or less Light L (O lighting) Red/green L (O lighting) L (O lighting) Yellow L (O lighting) Red/green L (O lighting) L (O lighting) Leakage current 1m or less or less 0m ote 1: Max. load current above: m at 2. he current will be lower than m if ambient temperature around switch is higher than 2. ( to m at 0 ) ith preventive maintenance output escriptions Proximity 3wire Proximity 4wire Proximity 3wire Proximity 4wire K2Y/ K3Y/ K2YM/ K3YM/ pplications Output method Programmable controller Programmable Programmable Programmable controller controller, relay controller, relay P output Installation position adjustment Red/green L (O lighting) Preventive maintenance output Yellow L (O lighting) Power voltage Load voltage Load current Leakage current Load voltage to 30 to m 1m or less to 2 30 or less 0m or less or less 30 or less to 30 to m 1.2m or less to 2 30 or less 0m or less or less Load current Leakage current m or less 0m or less to m or less or less 0m or less Light Output Preventive maintenance output ylinder weight Model no. ore size upport type 1 2 Product weight when stroke length = 0mm ouble acting 2 2 34 3 3 4 0 9 13 131 1 229 2 291 44 42 4 lean room specifications L ouble acting/with switch 2 2 34 3 3 4 4 3 1 10 2 2 33 1 49 44 3 4 1 2 Unit (g) dditional weight per = mm (atalog o. 033) ust generation preventing structure for use in clean room P* P* iscrete cylinder switch weight ame ylinder switch (xample) Product weight L1K2 Model no. K0 K2 K3 K 1m 1 1 1 1 eries pecifications Lead wire length 3m 2 2 2 2 Unit (g) m Product weight at stroke length = 0mm g dditional weight when =mm g x / = g eigh of two cylinder switches 1g x 2 = 3g Product weight g + g + 3g = 13g P*2 M2 ompact cylinder pace saving structure 0
eries P*2 M2 ow to order ithout switch ith switch L <xample of model number> L1K0R 1 K2 R Port thread type ote on model no. selection ore size 1 2 1 troke length (head end mounting type) (high rigid mounting type) mm stroke mm stroke mm stroke mm stroke Model: ompact cylinder Mounting style : Rod end mounting type ore size : mm Port thread type : Rc thread troke length : 1mm witch model no. : Reed switch K0, lead wire length 1m witch quantity : 1 on rod end ow to order switch K2 Mounting style ore size ote 1: or mounting style "" or "", if "" indicated on "witch selection table", K* type (axial lead wire) cannot be installed. Please use K* type (radial lead wire). witch selection table ote 2: Refer to page 0 for min. stroke length with switch. ote 3: opper and P free as standard. witch model no. ote 1 witch quantity ymbol escriptions Mounting style Rod end mounting type ead end mounting type igh rigid mounting type 1 2 ) custom order thread (only ) custom order troke length (mm) ore size troke length ote 2 ustom stroke length to 1 1 to 0 y 1 mm increment to 1 to 0 witch model no. xial lead wire K0* K* K2* K3* K3P* K2Y* K3Y* K2Y* K3Y* K2YM* K3YM* K0* K* K2* K3* K3P* K2Y* K3Y* K2Y* K3Y* K2YM* K3YM* *Lead wire length lank 3 1 2 Port thread type lank Rc thread P thread (only Radial lead wire 1m (standard) 3m (option) m (option) witch quantity R 1 on rod end 1 on head end wo ontact Indicator Lead wire Reed Proximity 1 color indicator type ithout indicator light 1 color indicator type 1 color indicator type (custom order) 2 color indicator type 2 color indicator type (/o indicator light for preventive maintenance output) 2 color indicator type (/ indicator light for preventive maintenance output (1 color)) 2wire 2wire 3wire 3wire 2wire 3wire 3wire 4wire 3wire 4wire witch model no. (Item above) 0
Internal structure and parts list ouble acting/with switch, magnet builtin type L, 1,, 2, ouble acting, 1,, 2, 1 1 2 3 4 9 o. Parts name Material 1 2 Piston rod ap tainless steel luminum alloy 3 Rod packing seal itrile rubber 4 Rod bushing ylinder body asket luminum alloy luminum alloy itrile rubber ushion rubber (R) Urethane rubber Piston luminum alloy 9 Piston packing seal itrile rubber Repair parts list 1 1 1 2 3 4 9 1 1 3 4 9 1 1 1 1 1 Kit o. K K 1K 13 13 1 1 1 13 Remarks o., 2, industrial chrome plating lumite 13 ard alumite 1 1 1 1 1 1 3 4 9 Parts name pacer Material luminum alloy ushion rubber () Urethane rubber ase plate luminum alloy asket itrile rubber type snap ring teel Magnet Plastic Mount luminum alloy exagon socket head cap bolt lloy steel exagon nut teel Remarks hromate Phosphoric acid zinc lack alumite lackening ickeling Repair parts number Kit o. Repair parts number K 3 9 13 2 2K 3 9 13 K 1 1 eries ouble acting single rod type 13 P*2 M2 ompact cylinder pace saving structure 09
eries P*2 M2 imensions ouble acting/with switch, rod end mounting type (L), 1,, 2, ymbol 1 2 ymbol 1 2 idth across flats idth across flats M J.. M M M 13.4 22.4 1.4 24.4.4.4 M2. depth M3 depth M4 depth 3.4 (penetrating).9 spot face depth.3 3.4 (penetrating).9 spot face depth. 4. (penetrating). spot face depth M3 M4 M 3 4 1 9 1. 2.4 3.2 1 1 24 13. 1. 13 1. M M 2.4 40.4.4 0.4 M depth M depth. (penetrating) 9 spot face depth.. (penetrating) 9 spot face depth 9. M M 9 1 1 13 1 3. 30 3 21 1 19. Rc1/ 40.4 2.4 21 M depth 9. (penetrating). spot face depth M x 1.2 1 24 4 ith switch /o / /o / K0/K K2/K3 K0/K K2/K3 switch switch switch switch..2 13 3 3 1 1 1.0 2.0.0 3.0.0.0.0.0.0..2 1 41 41 1.0 0.. 1.0.0 2.. 4.0.0.2 1.2 1 40 0 0. 1..0 0..0 1..0 2..0 13.2.2 1 19 4 0... 4. 13. 2.. 1. 13. 1.2 2.2 23 0 0 3 3 0.... 13... 4. 13..2 31.2 24 2 2 2 9 99 0. 9.0 19.0.0.0 19.0.0.0 K M ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: egative dimension shows dimensions of projecting section of switch from main body. ote 3: Refer to page 3 for, and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. 2J 2J 4K 2 + stroke length + stroke length 2J 2J 4K 2 + stroke length + stroke length R 2 U 2 U R U
imensions ouble acting/with switch, head end mounting type (L), ymbol 1 2 ymbol 1 2 1,, 2, U 2 2 U idth across flats idth across flats J K eries ouble acting single rod type M MP. M 13.4 22.4 M2. depth 3.4 (penetrating).9 spot face depth.3 M3 3 1. 1. 13. 1. 13 1. M M M M 1.4 24.4.4.4 2.4 40.4.4 0.4 M3 depth M4 depth M depth M depth 3.4 (penetrating) 4. (penetrating). (penetrating). (penetrating).9 spot face depth.. spot face depth 9 spot face depth. 9 spot face depth 9. M4 M M M 4 9 1 1 1 13 9 1 2.4 3.2 3. 1 24 30 3 21 1 19. Rc1/ 40.4 2.4 21 M depth 9. (penetrating). spot face depth M x 1.2 1 1 24 4 ith switch Y /o / /o / K0/K K2/K3 K0/K K2/K3 switch switch switch switch..2 1 3 3 2 2 1.0 1..0 2..0 1..0 2..0..2 1 1 41 41 1.0 3.. 4..0 3.. 4..0.2 1.2 1 1 40 0 0..0.0.0.0.0.0.0.0 13.2.2 1 19 1. 4 0... 9. 13... 9. 13. 1.2 2.2 23 2 0 0 3 3 0.... 13.... 13..2 31.2 24 2 2 2 2 9 99 0. 19.0 13..0 19.0 13..0 ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: egative dimension indicates dimensions of projecting section of switch from main body. ote 3: or, mm stroke cylinders, use K* switch because K* switch cannot be installed. ote 4: or mm stroke cylinder, use K* switch because K* switch cannot be installed. M MP 0 0.1 MP 0.1 0 Y 2 2J + stroke length + stroke length 2J 4K 2 2J + stroke length + stroke length R 2J 4K ote : Refer to page 3 for / and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. R U P*2 M2 ompact cylinder pace saving structure
eries P*2 M2 imensions ouble acting/with switch, high rigid mounting type (L), ymbol 1 2 ymbol 1,, 2, 1 2 idth across flats idth across flats J K M. M 13.4 22.4 M2. depth 3.4 (penetrating).9 spot face depth.3 M3 3 1. 1 M 1.4 24.4 M3 depth 3.4 (penetrating).9 spot face depth. M4 4 9 2.4 1. M.4.4 M4 depth 4. (penetrating). spot face depth M 1 3.2 24 13. M 2.4 40.4 M depth. (penetrating) 9 spot face depth. M 9 1 1 3. 30 1. 13 1. M.4 0.4 M depth. (penetrating) 9 spot face depth 9. M 1 13 3 21 1 19. Rc1/ 40.4 2.4 21 M depth 9. (penetrating). spot face depth M x 1.2 1 24 4 ith switch /o / /o / K0/K K2/K3 K0/K K2/K3 switch switch switch switch..2..2.2 1.2 13.2.2 1.2 2.2 1 13 1 1 19 23 49 2 1 49 2 1 2 1 0 2 1 90 9 1.0 1.0 0. 0. 0. 1. 3..0...0..0.. 2. 4..0 9...0.0.0 13. 13. 1. 3..0...0..0.. 2. 4..0 9...0.0.0 13. 13..2 31.2 24 2 2 92 9 9 0. 19.0 13..0 19.0 13..0 ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: egative dimension indicates dimensions of projecting section of switch from main body. ote 3: or, mm stroke cylinders, use K* switch because K* switch cannot be installed. ote 4: or mm stroke cylinder, use K* switch because K* switch cannot be installed. M Y 2J 2J 4K 2J 2 2J 2J 4K + stroke length + stroke length 2 2J + stroke length + stroke length P 2J 4K R 2J 4K ote : Refer to page 3 for / and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. R U
P*2 M2 pecifications escriptions ore size ctuation mm (L) Y (L) orking fluid Max. working pressure MPa Min. working pressure MPa (L) Y (L) ithstanding pressure MPa mbient temperature Port size troke tolerance orking piston speed ushion mm mm/s (L) Y (L) Lubrication llowable energy absorption J troke length 1 2 Model L YL L/ YL/ ore size 1 2 1 2 1 2 0.3 0.3, Y L, YL (with switch) 1 2 ingle acting, extend type ingle acting, retract type ompressed air 0. 1 color indicator type 2 color indicator type ith preventive maintenance output K* K* K*Y K*Y K*Y* K*Y* 1 0.2 1.0 to 0 (no freezing) M Rc1/ +1. 0 0 to 00 Rubber cushioned at only retract side Rubber cushioned at only extend side ot required (when lubricating, use turbine oil lass 1 IO.) 0.00 0.03 ote: o not leave the single acting cylinder in the pressurized state. If left in the pressurized state, the piston rod may not return with spring force when pressure is released. 0.1 0.1 tandard stroke length (mm) Max. stroke length (mm),, 1 ote 1: ustom stroke length is available per 1mm increment. Min. stroke length with switch ompact cylinder, Y eries ore size:,, 1,, 2, JI symbol ingle acting, extend type single acting extend type/with switch single acting retract type/with switch 0.19 1 1 1 1 ingle acting, retract type 0.1 0. Min. stroke length (mm)
witch specifications 1 color/2 color indicator Y cylinder weight (eight with switch is with a 2 piece by cylinder switch lead wire length 1m.) Unit (g) troke length (mm) 1 upport type /o switch ith switch /o switch ith switch /o switch ith switch 1 2 33 41 4 4 3 2 1 23 24 33 494 41 9 2 1 93 13 13 229 223 20 3 34 41 1 00 4 3 3 44 0 49 1 91 9 1 19 21 290 21 3 4 3 9 2 29 30 391 31 43 4 3 3 39 3 4 4 3 9 9 4 1 10 22 30 29 39 4 4 93 1 0 9 13 1 2 0 301 29 342 42 41 49 90 2 19 /Y spring load ore size (mm) 1 troke length (mm) 1 1 1 troke length 0 3.42 2.3 2.2.13.03 3.92. 9.99.3 ull stroke length during operation 4.02.2 1.3 ore size (mm) 2 troke length (mm) 1 1 1 iscrete cylinder switch weight ylinder switch troke length 0 13.. 9. 33.3 2. 24.0 34.4 29.4 24. ame Unit: ull stroke length during operation 1. 3 39. Model no. K0 K2 K3 K 1m 1 1 1 1 Y eries pecifications Proximity 2wire Proximity 3wire Reed 2wire escriptions K2/K2 K2Y/K2Y K3/K3 K3P/K3P K3Y/K3Y (ustom order) K0/K0 K/K pplications Output method Power voltage Programmable controller Programmable controller, relay P output PP output P output to 2 Programmable Programmable controller, relay controller, relay I circuit (without indicator light), serial connection Load voltage to 30 30 or less /24 1 //24 1 Load current to m (ote 1) 0m or less to 0m to m 0m or less m or less Light L (O lighting) Red/green L (O lighting) L (O lighting) Yellow L (O lighting) Red/green L (O lighting) L (O lighting) Leakage current 1m or less or less 0m ote 1: Max. load current above: m at 2. he current will be lower than m if ambient temperature around switch is higher than 2. ( to m at 0 ) ith preventive maintenance output escriptions Proximity 3wire Proximity 4wire Proximity 3wire Proximity 4wire K2Y/ K3Y/ K2YM/ K3YM/ pplications Output method Programmable controller Programmable Programmable Programmable controller controller, relay controller, relay P output Installation position adjustment section Red/green L (O lighting) Preventive maintenance output Yellow L (O lighting) Power voltage Load voltage Load current Leakage current Load voltage to 30 to m 1m or less to 2 30 or less 0m or less or less 30 or less to 30 to m 1.2m or less to 2 30 or less 0m or less or less Load current Leakage current m or less 0m or less to m or less or less 0m or less Light Output Preventive maintenance output Lead wire length 3m 2 2 2 2 Unit (g) m 1 P*2 M2 ompact cylinder pace saving structure
Y eries P*2 M2 ow to order ithout switch ith switch L ore size 1 2 Model no. ote on model no. selection (head end mounting type) mm stroke mm stroke Mounting style ore size 1 (high rigid mounting type) mm stroke mm stroke YL (single acting retract type) ore (head end mounting type) (high rigid mounting type) size mm stroke mm stroke mm stroke mm stroke 1 2 1 K2 R Port thread type troke length ote 1: or mounting style "" or "", if "" indicated on "witch selection table", K* type (axial lead wire) cannot be installed. Please use K* type (radial lead wire). witch selection table L (single acting extend type with switch) ote 2: Refer to page for min. stroke length with switch. ote 3: opper and P free as standard. witch model no. ote 1 witch quantity ymbol escriptions Model no. ingle acting extend type Y ingle acting retract type Mounting style Rod end mounting type ead end mounting type igh rigid mounting type 1 1 2 2 Port thread type lank troke length (mm) ore size troke length ote 2 to 1 to 1 witch model no. xial lead Radial lead wire wire ontact K0* K0* K* K* K2* K2* K3* K3* K3P* K3P* K2Y* K2Y* K3Y* K3Y* K2Y* K2Y* K3Y* K3Y* K2YM* K2YM* K3YM* K3YM* *Lead wire length lank 1m (standard) 3 3m (option) m (option) witch quantity R Rc thread P thread (only ) custom order thread (only ) custom order 1 on rod end 1 on head end wo Reed Proximity Proximity ustom stroke length 1 mm increment Indicator 1 color indicator type ithout indicator light 1 color indicator type 1 color indicator type (custom order) 2 color indicator type 2 color indicator type (/o indicator light for preventive maintenance output) 2 color indicator type (/ indicator light for preventive maintenance output (1 color)) Lead wire 2wire 2wire 3wire 3wire 2wire 3wire 3wire 4wire 3wire 4wire 1 <xample of model number> L1K0R Model: ompact cylinder Model no. Mounting style : ingle acting extend type : Rod end mounting type ore size : mm Port thread type : Rc thread troke length : 1mm witch model no. : Reed switch K0, lead wire length 1m witch quantity : 1 on rod end ow to order switch K2 witch model no. (Item above)
eries Internal structure and parts list Internal structure and parts list ingle acting extend type/with switch, magnet builtin type L, 1,, 2, ingle acting extend type, 1,, 2, o. Parts name 1 exagon nut 2 Rod bushing 3 ylinder body 4 pring Piston rod 1 2 3 4 pring holder pacer Magnet Repair parts list 1 1 1 1 2 3 4 1 1 Material teel luminum alloy luminum alloy teel tainless steel luminum alloy luminum alloy Plastic 9 1 2 3 4 13 9 1 2 3 4 13 Remarks ickeling lumite ard alumite lectrode position coating, 2, Industrial chrome plating 1 1 13 o. Parts name Material 9 Piston packing seal Piston itrile rubber luminum alloy ushion rubber () Urethane rubber 13 asket ase plate itrile rubber luminum alloy type snap ring teel 1 Mount luminum alloy 1 exagon socket head cap bolt lloy steel 9 1 1 13 Remarks hromate Phosphoric acid zinc lack alumite lackening Kit o. Repair parts number Kit o. Repair parts number K K K 1K 9 2 2K K 9 9 P*2 M2 ompact cylinder pace saving structure 1
Y eries P*2 M2 Internal structure and parts list o. 1 2 3 4 ingle acting retract type/with switch, magnet builtin type YL, 1,, 2, ingle acting, retract type Y, 1,, 2, Parts name Material exagon nut teel ap luminum alloy Rod packing seal itrile rubber ylinder body luminum alloy Rod bushing luminum alloy asket itrile rubber Piston rod tainless steel ushion rubber (R) Urethane rubber Repair parts list 1 2 3 4 1 2 3 4 1 1 1 13 1 Kit o. YK YK Y1K 9 Remarks ickeling ard alumite lumite, 2, industrial chrome plating Repair parts number 3 1 3 4 9 1 3 4 1 1 13 1 o. Parts name Material 9 13 pacer Magnet Piston packing seal Piston pring ase plate luminum alloy Plastic itrile rubber luminum alloy teel luminum alloy 1 type snap ring teel 1 Mount luminum alloy 1 exagon socket head cap bolt lloy steel 2 1 1 13 1 Kit o. YK Y2K YK 9 1 1 13 1 Remarks lectrode position coating hromate Phosphoric acid zinc lack alumite lackening Repair parts number 3 1
imensions ingle acting extend type/with switch, rod end mounting type (L), 1,, 2, ymbol 1 2 ymbol 1 2 idth across flats idth across flats M J K. M M 13.4 22.4 M2. depth 3.4 (penetrating).9 spot face depth.3 1.4 24.4 M3 depth 3.4 (penetrating).9 spot face depth. M3 M4 3 4 9 1. 2.4 1 1...2.2. M.4.4 M4 depth 4. (penetrating). spot face depth M 1 3.2 24.2 1.2 13. M 2.4 40.4 M depth. (penetrating) 9 spot face depth. M 9 1 1 3. 30 13.2.2 1. 13 1. M.4 0.4 M depth. (penetrating) 9 spot face depth 9. M 1 13 3 1.2 2.2 21 1 19. Rc1/ 40.4 2.4 M depth 9. (penetrating). spot face depth M x 1.2 1 24 4.2 31.2 ith switch st st 1st st st 1st K0/K K2/K3 K0/K K2/K3 /o / /o / /o / /o / /o / /o / 13 4 4 3 3 1 1 1 1 1.0 2.0.0 3.0.0.0.0.0.0 1 1 1 1 1 2 2 1.0 0.. 1.0 2.. 4.0 1 0 0 0 0 1 1 0. 1. 1.0 0. 1.0 1. 1.0 2. 1.0 1 19 1 1 0 90 9 0.. 1. 4. 1. 2. 1. 1. 1. 23 0 0 0 0 3 93 9 93 3 0.. 1.. 1.. 1. 4. 1. 24 2 2 2 2 92 99 9 4 4 9 9 0. 9.0 24.0 2.0.0 24.0.0 2.0 ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: egative dimension indicates dimensions of projecting section of switch from main body. ote 3: Refer to page 3 for, and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. 2J 2J 4K 2J 2J 4K M R eries ingle acting extend type R 2 U U 2 U 19 P*2 M2 ompact cylinder pace saving structure
eries P*2 M2 imensions ingle acting extend type/with switch, head end mounting type (L), 1,, 2, ymbol 1 2 ymbol 1 2 U 2 2 U idth across flats idth across flats J K. M 13.4 22.4 M2. depth 3.4 (penetrating).9 spot face depth.3 M3 3 1. 1..2 M 1.4 24.4 M3 depth 3.4 (penetrating).9 spot face depth. M4 4 9 2.4 1..2. M.4.4 M4 depth 4. (penetrating). spot face depth M 1 3.2 24.2 1.2 13. M 2.4 40.4 M depth. (penetrating) 9 spot face depth. M 9 1 1 3. 30 13.2.2 1. 13 1. M.4 0.4 M depth. (penetrating) 9 spot face depth 9. M 1 13 3 1.2 2.2 21 1 19. Rc1/ 40.4 2.4 M depth 9. (penetrating). spot face depth M x 1.2 1 1 24 4.2 31.2 ith switch st st 1st st st 1st K0/K K2/K3 K0/K K2/K3 /o / /o / /o / /o / /o / /o / 1 1 1 19 4 1 0 4 1 0 3 1 3 1 1 0 1 0 2 2 3 1 0 3 1 90 2 2 9 1.0 1.0 0. 0. 1. 3..0..0. 1.0 1. 2. 4..0 9..0 1.0 1. 1. 3..0..0. 1.0 1. 2. 4..0 9..0 1.0 1. 23 0 0 0 0 3 93 9 93 3 0.. 1.. 1.. 1.. 1. 24 2 2 2 2 92 99 9 4 4 9 9 0. 24.0 13. 2.0 24.0 13. 2.0 ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: egative dimension indicates dimensions of projecting section of switch from main body. ote 3: or, mm stroke cylinders, use K* switch because K* switch cannot be installed. ote 4: or mm stroke cylinder, use K* switch because K* switch cannot be installed. MP 0 0.1 MP 0 0.1 M Y Y 2J 2J 4K 2J R 2J 4K M MP R ote : Refer to page 3 for / and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. U
imensions ingle acting extend type/with switch, high rigid mounting type (L), 1,, 2, ymbol 1 2 ymbol 1 2 idth across flats idth across flats J K. M 13.4 22.4 M2. depth 3.4 (penetrating).9 spot face depth.3 M3 3 1. 1..2 M 1.4 24.4 M3 depth 3.4 (penetrating).9 spot face depth. M4 4 9 2.4 1..2. M.4.4 M4 depth 4. (penetrating). spot face depth M 1 3.2 24.2 1.2 13. M 2.4 40.4 M depth. (penetrating) 9 spot face depth. M 9 1 1 3. 30 13.2.2 1. 13 1. M.4 0.4 M depth. (penetrating) 9 spot face depth 9. M 1 13 3 1.2 2.2 21 1 19. Rc1/ 40.4 2.4 M depth 9. (penetrating). spot face depth M x 1.2 1 24 4.2 31.2 ith switch st st 1st st st 1st K0/K K2/K3 K0/K K2/K3 /o / /o / /o / /o / /o / /o / 13 1 9 2 9 2 4 4 9 2 9 2 2 2 3 3 2 2 1.0 1.0 1. 3..0. 2. 4..0 1. 3..0. 2. 4..0 1 0 0 1 91 9 91 1 0..0 1.0.0 1.0.0 1.0.0 1.0 1 19 23 1 1 0 90 1 91 9 90 0 9 0 1 0. 9 3 3 0... 1. 1. 9.. 1. 1... 1. 1. 9.. 1. 1. 24 2 92 2 9 2 2 9 9 4 134 9 139 0. 24.0 13. 2.0 24.0 13. 2.0 ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: egative dimension indicates dimensions of projecting section of switch from main body. ote 3: or, mm stroke cylinders, use K* switch because K* switch cannot be installed. ote 4: or mm stroke cylinder, use K* switch because K* switch cannot be installed. M P 2J 2J 4K 2J 2J 4K P 2J 2J 4K 2J M R 2J 4K eries ingle acting extend type R ote : Refer to page 3 for / and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. U 21 P*2 M2 ompact cylinder pace saving structure
Y eries P*2 M2 imensions ingle acting retract type/with switch, rod end mounting type Y(L), ymbol 1 2 ymbol 1,, 2, 1 2 idth across flats idth across flats M J K M R U st st 1st. M 13.4 22.4 M2. depth 3.4 (penetrating).9 spot face depth.3 M3 3 1. 1..2 1 23 2 M 1.4 24.4 M3 depth 3.4 (penetrating).9 spot face depth. M4 4 9 2.4 1..2 21 2 31. M.4.4 M4 depth 4. (penetrating). spot face depth M 1 3.2 24.2 1.2 21 2 31 13. M 2.4 40.4 M depth. (penetrating) 9 spot face depth. M 9 1 1 3. 30 13.2.2 1 24 29 34 1. 13 1. M.4 0.4 M depth. (penetrating) 9 spot face depth 9. M 1 13 3 1.2 2.2 3 33 3 21 1 21 19. Rc1/ 40.4 2.4 21 M depth 9. (penetrating). spot face depth M x 1.2 1 24 4.2 31.2 24 3 42 ith switch st st 1st st st 1st K0/K K2/K3 K0/K K2/K3 /o / /o / /o / /o / /o / /o / 4 1 4 1 3 3 1 1 2 2 2 2 92 92 1.0 1.0 3.0..0. 2.0 4.0.0.0 0.0 2..0. 1.0 1.0.0.0 0 0 0 0 1 1 1 91 91 1 0...0..0 3..0 2..0 0 0 0 1 1 0 0 0 90 9 90 9 0 0 1 0. 0.. 13... 9.. 13. 13...... 9. 13. 13. 2 2 2 92 4 4 4 4 4 134 0..0 19.0 13.0.0.0 19.0.0.0 ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: egative dimension indicates dimensions of projecting section of switch from main body. ote 3: Refer to page 3 for, and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. 2J 2J 4K 2J 2J 4K R 2 U 2 U 22
imensions ingle acting retract type/with switch, head end mounting type Y(L), ymbol 1 2 ymbol 1,, 2, 1 2 2 U 2 U idth across flats idth across flats J K M MP R U st st 1st. 13. 1.. 13 1. M M M M M 13.4 22.4 1.4 24.4.4.4 2.4 40.4.4 0.4 M2. depth 3.4 (penetrating).9 spot face depth.3 M3 depth 3.4 (penetrating).9 spot face depth. M4 depth 4. (penetrating). spot face depth M depth. (penetrating) 9 spot face depth. M depth. (penetrating) 9 spot face depth 9. M3 M4 M M M 3 4 9 1 1 1 13 9 1 1. 2.4 3.2 3. 1 1 24 30 3..2..2.2 1.2 13.2.2 1 1.2 2.2 19 22 21 24 2 24 2 2 29 33 29 31 34 3 21 1 19. Rc1/ 40.4 2.4 21 M depth 9. (penetrating). spot face depth M x 1.2 1 1 24 4.2 31.2 24 3 42 ith switch Y st st 1st st st 1st K0/K K2/K3 K0/K K2/K3 /o / /o / /o / /o / /o / /o / 1 4 4 3 3 1.0..0..0..0..0 1 1 1 1 1 3 3 3 3 3 93 1.0.. 9..0.. 9..0 1 0 0 0 0 1 1 1 91 91 1 0..0.0.0.0.0.0.0.0 1. 0 1 1 0 90 90 0 0 1 0. 13... 13. 13... 13. 2 0 0 0 0 9 9 0. 1.. 1. 13. 1.. 1. 13. 2 2 2 2 92 4 4 4 4 4 134 0. 1.0 19.0 1..0 1.0 19.0 1..0 ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: egative dimension shows dimensions of projecting section of switch from main body. ote 3: or mm stroke, use K* switch because K* switch cannot be installed. M MP 0 0.1 MP 0 0.1 Y Y 2J 2J 4K 2J 2J R 4K Y eries ingle acting retract type ote 4: Refer to page 3 for / and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. P*2 M2 ompact cylinder pace saving structure 23
Y eries P*2 M2 imensions ingle acting retract type with switch, high rigid mounting type Y(L), ymbol 1 2 ymbol 1,, 2, 1 2 idth across flats idth across flats J K M R U st st 1st. M 13.4 22.4 M2. depth 3.4 (penetrating).9 spot face depth.3 M3 3 1. 1..2 1 23 2 M 1.4 24.4 M3 depth 3.4 (penetrating).9 spot face depth. M4 4 9 2.4 1..2 21 2 31. M.4.4 M4 depth 4. (penetrating). spot face depth M 1 3.2 24.2 1.2 21 2 31 13. M 2.4 40.4 M depth. (penetrating) 9 spot face depth. M 9 1 1 3. 30 13.2.2 1 24 29 34 1. 13 1. M.4 0.4 M depth. (penetrating) 9 spot face depth. M 1 13 3 1.2 2.2 2 33 3 21 1 19. Rc1/ 40.4 2.4 21 M depth 9. (penetrating). spot face depth M x 1.2 1 24 4.2 31.2 24 3 42 ith switch st st 1st st st 1st K0/K K2/K3 K0/K K2/K3 /o / /o / /o / /o / /o / /o / 9 9 4 4 9 9 9 9 1.0..0..0..0..0 2 2 2 2 3 3 93 93 3 3 1.0.. 9..0.. 9..0 0 0 9 9 0..0.0.0.0.0.0.0.0 1 1 0 90 1 91 9 9 0. 3 3 3 3 3 133 0. 13. 1.... 1. 13. 13. 13. 1.... 1. 13. 13. 92 2 9 2 2 4 134 134 4 4 0. 1.0 19.0 1..0 1.0 19.0 1..0 ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: egative dimension indicates dimensions of projecting section of switch from main body. ote 3: or mm stroke cylinder, use K* switch because K* switch cannot be installed. M 2J 2J 4K 2J 2J 4K 2J 2J 4K 2J R 2J 4K ote 4: Refer to page 3 for / and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. 24
P*2 M2 pecifications escriptions ore size mm ctuation orking fluid Max. working pressure MPa Min. working pressure MPa ithstanding pressure MPa mbient temperature Port size troke tolerance mm orking piston speed mm/s ushion Lubrication llowable energy absorption J troke length Model no. L ote 1: ustom stroke length is available per 1mm increment. ompact cylinder, fine speed type eries ore size:,, 1,, 2, JI symbol ouble acting /L (with switch) 1 2 ouble acting ompressed air 0.0 0.1 0. 1.0 to 0 M +1. 0 1 to 0 Rubber cushioned Must be oil free 0.00 0.03 0.1 0.1 0.19 0.,, 1, 2, Min. stroke length with switch Model L L/,, 1,, 2, 30,, 1,, 2, 30, 40, 0 0 0 1 Rc 1/ tandard stroke length (mm) Max. stroke length (mm) Min. stroke length (mm) ore size 1 2 1 2 1 color indicator type 2 color indicator type ith preventive maintenance output K* K* K*Y K*Y K*Y* K*Y* 1 1 1 1 lean room specifications (atalog o. 033) ust generation preventing structure for use in clean room P* 2
eries pecifications witch specifications 1 color/2 color indicator Proximity 2wire Proximity 3wire Reed 2wire escriptions K2/K2 K2Y/K2Y K3/K3 K3P/K3P K3Y/K3Y (ustom order) K0/K0 K/K pplications Output method Power voltage Programmable controller Programmable controller, relay P output PP output P output to 2 Programmable Programmable controller, relay controller, relay I circuit (without indicator light), serial connection Load voltage Load current to 30 to m (ote 1) 30 or less 0m or less /24 to 0m 1 to m //24 0m or less 1 m or less Light L (O lighting) Red/green L (O lighting) L (O lighting) Yellow L (O lighting) Red/green L (O lighting) L (O lighting) Leakage current 1m or less or less 0m ote 1: Max load current above: m at 2. he current will be lower than m if ambient temperature around switch is higher than 2. ( to m at 0 ) ith preventive maintenance output escriptions Proximity 3wire Proximity 4wire Proximity 3wire Proximity 4wire K2Y/ K3Y/ K2YM/ K3YM/ pplications Output method Programmable controller Programmable Programmable Programmable controller controller, relay controller, relay P output Installation position adjustment section Red/green L (O lighting) Preventive maintenance output Yellow L (O lighting) Power voltage Load voltage Load current Leakage current Load voltage to 30 to m 1m or less to 2 30 or less 0m or less or less 30 or less to 30 to m 1.2m or less to 2 30 or less 0m or less or less Load current m or less 0m or less to m or less 0m or less Leakage current or less Light Output Preventive maintenance output eight P*2 M2 ompact cylinder pace saving structure It is the same as the double acting/single rod type series. Refer to page 0. imensions It is the same as the double acting/single rod type series. Refer to pages to. 2
eries P*2 ow to order ithout switch 1 ith switch L ore size K2 Mounting style Port thread type troke length ote on model no. selection ote 1: or mounting style "" or "", if "" indicated on "witch selection table", K* type (axial lead wire) cannot be installed. Please use K* type (radial lead wire). witch selection table ore (head end mounting type) (high rigid mounting type) size mm stroke mm stroke mm stroke mm stroke 1 2 ote 2: Refer to page 2 for min. stroke length with switch. M2 <xample of model number> L1K0R Model: ompact cylinder fine speed type Mounting style : Rod end mounting type ore size : mm Port thread type : Rc thread troke length : 1mm witch model no. : Reed switch K0, lead wire length 1m witch quantity : 1 on rod end ow to order switch K2 1 R witch model no. ote 1 witch quantity ymbol escriptions Mounting style Rod end mounting type ead end mounting type igh rigid mounting type 1 2 1 2 Port thread type lank Rc thread P thread (only ) (custom order) thread (only ) (custom order) troke length (mm) ore size troke length ote 2 ustom stroke length to 1 to witch model no. xial lead Radial lead wire wire K0* K0* K* K* K2* K2* K3* K3* K3P* K3P* K2Y* K2Y* K3Y* K3Y* K2Y* K2Y* K3Y* K3Y* K2YM* K2YM* K3YM* K3YM* *Lead wire length lank 3 1 to 0 1 to 0 1m (standard) 3m (option) m (option) witch quantity R 1 on rod end 1 on head end wo ontact Reed Proximity Proximity 1 mm increment Indicator 1 color indicator type ithout indicator light 1 color indicator type 1 color indicator type (custom order) 2 color indicator type 2 color indicator type (/o indicator light for preventive maintenance output) 2 color indicator type (/ indicator light for preventive maintenance output (1 color)) Lead wire 2wire 2wire 3wire 3wire 2wire 3wire 3wire 4wire 3wire 4wire witch model no. (Item above) 2
P*2 M2 pecifications escriptions ore size mm ctuation orking fluid Max. working pressure MPa Min. working pressure MPa ithstanding pressure MPa mbient temperature Port size troke tolerance mm orking piston speed mm/s ushion Lubrication Revolvable angle tolerance ote llowable torque m llowable energy absorption J troke length M ML (with switch) 1 2 ouble acting ompressed air 0. 0.1 0.1 1.0 to 0 (no freezing) M Rc1/ +1. 0 0 to 00 Rubber cushioned ot required (when lubricating, use turbine oil lass 1 IO.) 0. 0. 0.00 0.02 0.0 0.1 0.33 0. 0.00 0.03 0.1 0.1 0.19 0. ote: alue for stroke 0 (excluding piston rod deflection) tandard stroke length (mm) Max. stroke length (mm),, 1,, 2, 30 30 1 2,, 1,, 2, 30, 40, 0 0 ote 1: ustom stroke length is available per 1mm increment. Min. stroke length with switch ML Model ore size 1 2 ompact cylinder, double acting nonrotating type M eries ore size:,, 1,, 2, JI symbol M ouble acting nonrotating type Min. stroke length (mm) 1 1 color indicator type 2 color indicator type ith preventive maintenance output K* K* K*Y K*Y K*Y* K*Y* 1 1 1 30
witch specifications 1 color/2 color indicator Proximity 2wire Proximity 3wire Reed 2wire escriptions K2/K2 K2Y/K2Y K3/K3 K3P/K3P K3Y/K3Y K0/K0 K/K (ustom order) pplications Programmable controller Programmable controller, relay Programmable Programmable controller, relay controller, relay I circuit (without indicator light), serial connection Output method Power voltage P output PP output P output to 2 Load voltage to 30 30 or less /24 1 //24 1 Load current to m (ote 1) 0m or less to 0m to m 0m or less m or less Light L (O lighting) Red/green L (O lighting) L (O lighting) Yellow L (O lighting) Red/green L (O lighting) L (O lighting) Leakage current 1m or less or less 0m ote 1: Max. load current above: m at 2 ith preventive maintenance output. he current will be lower than m if ambient temperature around switch is higher than 2. ( to m at 0 ) escriptions Proximity 3wire Proximity 4wire Proximity 3wire Proximity 4wire K2Y/ K3Y/ K2YM/ K3YM/ pplications Programmable controller Programmable Programmable Programmable controller controller, relay controller, relay Output method Installation position adjustment section P output Red/green L (O lighting) Preventive maintenance output Yellow L (O lighting) Power voltage Load voltage Load current Leakage current Load voltage to 30 to m 1m or less to 2 30 or less 0m or less or less 30 or less to 30 to m 1.2m or less to 2 30 or less 0m or less or less Load current Leakage current m or less 0m or less to m or less or less 0m or less ylinder weight Unit (g) iscrete cylinder switch weight Unit (g) Product weight when stroke length = 0mm Model no. dditional weight Lead wire length M ML ame Model no. double acting double acting/with switch per = mm 1m 3m m 30 30 3 K0 1 2 43 43 4 K2 1 2 ylinder switch 1 9 9 K3 1 2 1 K 1 2 2 21 4 29 1 2 (xample) Product weight ML1K2 Product weight when stroke length = 0mm 9g dditional weight when =mm g x / = g eigh of two cylinder switches 1g x 2 = 3g Product weight 9g + g + 3g = g M2 Light Output P*2 ompact cylinder pace saving structure Preventive maintenance output M eries pecifications 31
M eries P*2 M2 ow to order ithout switch M ith switch 1 ML 1 K2 R ote on model no. selection ote 1:or the item indicated by "" on the switch selection guide, K* type (axial lead wire) switch cannot be installed. Use K* type (radial lead wire) switch. witch selection table ore size mm stroke mm stroke 1 2 <xample of model number> ML1K0R troke length witch model no. ote 1 Model: ompact cylinder ore size : mm Port thread type : Rc thread troke length : 1mm witch model no. : Reed switch K0, lead wire length 1m witch quantity : 1 on rod end ow to order switch ore size K2 Port thread type ote 2: Refer to page 30 for min. stroke length with switch. ote 3: opper and P free as standard. witch quantity ymbol 1 1 2 2 escriptions troke length (mm) ore size troke length ote 2 ustom stroke length witch model no. xial lead Radial lead wire wire K0* K0* K* K* K2* K2* K3* K3* K3P* K3P* K2Y* K2Y* K3Y* K3Y* K2Y* K2Y* K3Y* K3Y* K2YM* K2YM* K3YM* K3YM* *Lead wire length Port thread type lank to 1 to lank 3 Rc thread P thread (only ) (custom order) thread (only ) (custom order) 1 to 30 1 to 0 1m (standard) 3m (option) m (option) witch quantity R 1 on rod end 1 on head end wo ontact Reed Proximity Proximity 1 mm increment Indicator 1 color indicator type ithout indicator light 1 color indicator type 1 color indicator type (custom order) 2 color indicator type 2 color indicator type (/o indicator light for preventive maintenance output) 2 color indicator type (/ indicator light for preventive maintenance output (1 color)) Lead wire 2wire 2wire 2wire 3wire 2wire 3wire 3wire 4wire 3wire 4wire witch model no. (Item above)
Internal structure and parts list o. 1 2 3 4 9 ouble acting nonrotating type (with switch) ML, ouble acting nonrotating type M, Parts name exagon nut exagon socket head cap bolt onrotating plate ap Rod packing seal ylinder body Rod bushing asket Piston rod ushion rubber (R) pacer Repair parts list 1 2 3 4 19 21 13 1 1 1 1 22 23 1 2 3 4 1 1,, 2, 9 1 2 3 ote: o not move the position of baffle plate (3) when using. Moving the position results in insufficient performance of nonrotation function.,, 2, ote: o not move the position of baffle plate (3) when using. Moving the position results in insufficient performance of nonrotation function. Material Remarks o. Parts name Material teel ickeling Magnet Plastic lloy steel lackening 13 Piston packing seal itrile rubber luminum alloy hromate Piston luminum alloy luminum alloy 1 ushion rubber () Urethane rubber itrile rubber 1 asket itrile rubber luminum alloy ard alumite 1 ase plate luminum alloy luminum alloy lumite 1 type snap ring teel itrile rubber 19 exagon socket set screw lloy steel tainless steel, 2, industrial uide bar tainless steel chrome plating 21 onrotating bush Placental Urethane rubber 22 Mount luminum alloy luminum alloy 23 exagon socket head cap bolt lloy steel Kit o. K K 1K Repair parts number 13 1 1 19 21 13 9 1 2 3 19 21 13 1 1 1 1 22 23 19 21 13 2 Kit o. K 2K K M eries Internal structure and parts list 9 1 1 1 1 22 23 9 1 1 1 1 22 23 Remarks hromate Phosphoric acid zinc lackening industrial chrome plating lack alumite lackening Repair parts number 13 1 1 P*2 M2 ompact cylinder pace saving structure 33
M eries P*2 M2 imensions ouble acting nonrotating type (with switch) M (L), or mm bore size and and mm stroke, K* switch cannot be installed. Use K* switch. or mm bore size and mm stroke, K* switch cannot be installed. Use K* switch. ouble acting nonrotating type (with switch) M (L),, 2, ymbol 1 2 ymbol 1 2 or 1, mm bore size and mm stroke, K* switch cannot be installed. Use K* switch.. 13. 1. 21 M (Penetrating) M M (Penetrating) M M M. 13 1 1. 19. ithout 3 41 40 4 0 2 M M M M M 13.4 M 1.4 M.4 M 2.4 M.4 Rc1/ 40.4 ith 3 41 0 0 2 M M M M 22.4 24.4.4 40.4 0.4 2.4 21 ithout 3 3 4 J 3.4 (penetrating) 3.4 (penetrating) 4. (penetrating). (penetrating). (penetrating). (penetrating) ith 3 93 4 idth across flats P M M idth across flats P K.9 spot face depth.3.9 spot face depth.. spot face depth 9 spot face depth. 9 spot face depth 9.. spot face depth ith switch 1.0 1.0 0. 0. 0. 0. M M3 M4 M M M M x 1.2 M M M M M M M M M. 9. 22.. 30 1.. 33 19. 13. 1 1 13 1 M3 M3 M4 M4 3 4 9 43. 24. 19 1. 30. 21 2 2 M M ote 1: and dimensions for, stroke will differ from these due to manufacturing. ote 2: or and mm stroke, use K* switch because K* switch cannot be installed. ote 3: or mm stroke, use K* switch because K* switch cannot be installed. ote 4: Refer to page 3 for / and dimensions of projecting section of 2 color indicator type preventive maintenance output switch. 1. 3..0.. 2 + stroke length + stroke length 2 + stroke length + stroke length 2J 2J 4K R P 13 1 22 29 1 1 1 R 13 1 9 1 24 1. 2.4 3.2 3....2 13.2 1.2.2.2.2 1.2.2 2.2 31.2 K0/K K2/K3 K0/K K2/K3.0..0.. 19.0 2. 4..0 9.. 13..0.0.0 13. 13..0 1. 3..0...0..0.. 19.0 2. 4..0 9.. 13. 2J 2J 4K 1 24 19 22 2 29 33 42.0.0.0 13. 13..0 34
M eries imensions of types with switches imensions (2 color indicator type, preventive maintenance output switch) ML (with switch: K2Y/, K3Y/) 1 2 13.. 1. 19. 22. 2. ML (with switch: K2Y/, K3Y/, K2YM/, K3YM/) 1 21.0 2.0 29.0.0 34.0 K K2Y K2Y K 4.0.0 9.0 1. 0. 2. 4.0.0.0. P*2 M2 1 2 19.0.0 22.0 2.0 2 1 21.0 2.0 29.0.0 4.0.0 9.0 0. 2. 4.0.0.0 ompact cylinder pace saving structure.0 34.0 1.. 3
eries P*2 M2 series common dimensions of types with switches (2 color indicator type, preventive maintenance output switch) L (with switch: K2Y/, K3Y/) L YL 1 2 13.. 1. 19. 22. 2. 1 21.0 2.0 29.0.0 34.0 4.0.0 9.0 1. ote: If the dimensions are negative, the leadin dimensions from the cylinder end are indicated. L (with switch: K2Y/, K3Y/, K2YM/, K3YM/) L YL 1 L YL K K2Y K K2Y L 9.0.0.0 1.0 1.0 23. L L...0 2.0 2.0 2. YL 3. 1. 0.0 3.0.0. L YL L L L YL 1 2 19.0.0 22.0 2.0 2.0 1 21.0 2.0 29.0.0 34.0 4.0.0 9.0 1. 9.0.0.0 1.0 1.0 23... 4.0 1.0 3.0 3. 2. 0. 1.0 4.0. ote: If the dimensions are negative, the leadin dimensions from the cylinder end are indicated. 3