TECHNICAL DOCUMENTATION Remote control slope mower Power and control in your hands
2 Maximum safety with the standard equipped roll bar. 55 55 icut4 the most powerful remote control slope mower in its category providing top performance in the most challenging ground conditions. An amazing reliable and consistent machine sticking to steep gradients like a spider on a glass wall. 4-cylinder engine more power to tackle slopes and difficult terrains. Intuitive control-box with display visualizing operations step by step. Bigger fuel tank for greater autonomy and economy. The workshops Ferri, founded in 1844, stand for innovation and quality in the design and construction of hedgecutters, flail mowers and hydraulic flail heads for excavators. A Company consistently endeavouring in the search for the highest quality and products performance associated with scrupulous customer care. icut4 is available in two versions: Fixed tracks (icut4 TRACK 1.3 m) Expandable tracks (icut4 FLEX from 1.30 m to 1 m) to work in restricted areas and facilitate the transport.
TECHNICAL DOCUMENTATION 3 Engine Diesel engine 4-cylinder Engine power 35.9 kw/49 HP Max Torque 1.800 (rpm) 139.5 Nm Displacement (cc) 2179 Engine suction natural air flow Speed (rpm) adjustable Cooling system liquid Heat exchanger for engine coolant and hydraulic oil Self clean reversible blades The most powerful engine in its category, with 4-cylinder, 35.9 kw/49 HP, 2179 cc, to deliver the maximum torque (139.5 Nm) and tackle with less effort the toughest terrain and slopes.
4 Hydraulic System The Load Sensing technology significantly reduces energy dissipation by matching the pump flow rate to that required by the user. The advantage is constituted by a hydraulic optimization of the oil flow needs for the benefit of consumption. Thanks to the Flow Sharing valve in case of saturation of flow (which occurs when the demand of oil is higher than the flow rate delivered by the pump) the distributor provides the proportional reduction of the flow of each spool. The result is a greater efficiency, characterized to ensure in all circumstances the maximum productivity. Variable displacement piston pump for travel and services; five section distributor.
TECHNICAL DOCUMENTATION 5 22 23 1 2 3 4 Control box A state-of-the-art last generation remote control box offers a LED display with: engine coolant temperature gauge hydraulic oil temperature gauge battery indicator floating system on light engine oil pressure light fuel reserve clogged up air filter light. side controls 21 5 20 19 18 side controls 6 7 8 9 An acoustic alarm alerts the operator of any faults. In addition to the immediate cut-off button the remote control box is also equipped with a safety device that sends a stop signal to the machine in the event of sudden and unjustified inclination of the control box itself. A cruise control system that can be activated from the console allows the automatic speed adjustment. 17 16 15 14 13 12 11 10 Console functions 1 display 8 key power 16 auxiliary intake 2 commands for changing parameters 9 start 17 rotor sense of direction 3 RH track forward / backward 10 rotor start 18 connecting cable 4 undercarriage opening / closing (icut4 FLEX) 11 accelerator 19 reversible self cleaning fan 5 1st and 2nd speed 12 oil flow adjustement 20 engine stop 6 floating 13 emergency push botton 21 engine start 7 horn 14 cruise control 22 arm lift and drop 15 auxiliary intake 23 LH track forward / backward
6 Starter panel The warnings as per points 1, 2, 3, 7 and 8 in the starter panel, also appear on the console display allowing the operator to have full control of the machine functions. 1 2 3 4 5 Diagnostic 12 11 10 9 8 7 6 Failures related to any operating function can be easily detected through a display located on the electric box. 1 engine oil low pressure light 7 2 clogged up air filter light 8 3 charging battery light 9 4 operating machine warning light 10 5 working lights switch 11 6 pre-heating sparking plugs light 12 high water temperature light fuel reserve ignition key cable socket power cut-off button working hours clock
TECHNICAL DOCUMENTATION 7 Adjustable undercarriage In icut4 FLEX design we have also taken into consideration: the need to operate in confined spaces (A) transporting the machine on trucks or vans (B). (A) The icut4 width can be contracted via the control box from 130 cm to 100 cm. The 135 cm flail head can be replaced with another model with a 100 cm cutting width. (B) With the 135 cm flail head, it is in any case possible from the console to reduce the width of the undercarriage and then lift and tilt the flail head obtaining an overall width well within the desired tracks contraction. icut4 FLEX
8 Tracks Wide section tracks to apply less specific pressure on the ground. STANDARD Undercarriage A triple flange track roller placed close to the sprocket along with a track chain guard secure the tracks functionality reducing detracking risks. Fixed undercarriage (serial on icut4 TRACK model) Adjustable undercarriage (serial on icut4 FLEX) 1.30 m Carrier rollers n 5 from 1.30 m to 1.00 m STANDARD PLUS 5 rollers to ensure an optimized weights distribution and to achieve a consistent grip when tackling challenging gradients. GRIP with steel treads GRIP PLUS with steel treads and spikes
Dimensions Width (without mower - icut4 TRACK model) Width (without mower - icut4 FLEX model) Heigth Length (without mower) Length (with R1000 and R1300 mower) Weight (with R1300 mower - icut4 TRACK model) Weight (with R1300 mower - icut4 FLEX model) 1,30 m from 1,30 m to 1,00 m 1,27 m 2,32 m 3,07 m 1.370 kg 1.460 kg TECHNICAL DOCUMENTATION 1270 mm 1350 mm 1300 mm 1740 mm 1480 mm 2320 mm 3070 mm 9 Floating system A mixed system, mechanical and hydraulic allows the flail mower to follow ground contours smoothly. A pre-loaded spring device moves the weight of flail mower back to the carrier decreasing friction in forward transfer.
10 Flail mowers News Model R1000 R1300 R1700 Working width m 1,05 1,35 1,65 Weight kg 170 190 240 Multiuse blades n 36 44 Forged hammers n 18 22 Articulated y blades n 36 44 56 Multiuse blades Cutting tools Forged hammers Articulated y blades News Hydraulic forestry mulcher Model News RF1300 Working width m 1,32 Weight kg 370 Turning hammers n 18 Cutting tools Turning hammers
TECHNICAL DOCUMENTATION 11 Technical features Engine ENGINE ENGINE POWER POWER 4-cylinder Diesel ISUZU 35.9 kw/49 HP Diesel LUBRICATION from 0 to 55 FUEL TANK CAPACITY MAX TORQUE DISPLACEMENT INTAKE SPEED COOLING SYSTEM HEAT EXCHANGER FAN Hydraulic System PUMP FOR TRAVEL AND SERVICES ROTOR DRIVE PUMP DISTRIBUTOR HYDRAULIC Controls RADIO CONTROL MOVEMENTS THROUGH JOYSTICK MACHINE MOVEMENTS Transmission 32 liters 139.5 Nm at 1800 rpm 2179 cc natural adjustable (rpm) liquid MAXIMUM WORKING GRADIENT 55 TRANSMISSION BRAKE TRAVEL SPEED Undercarriage for engine coolant and hydraulic oil reversible self cleaning fan piston with variable displacement and load sensing piston fixed displacement 5 sections Flow Sharing oil 46 liters 100-150 m radius proportional forward-backward / left-right hydraulic - 2 speed negative automatic 0-3.5 km/h slow from 0 to 7.0 km/h fast FIXED UNDERCARRIAGE serial on icut4 TRACK model (1.3 m) ADJUSTABLE UNDERCARRIAGE serial on icut4 FLEX model (from 1.3 m to 1.0 m) CARRIER ROLLERS n 5 Flail mowers ROTOR RPM 3000 ROTOR DSR (Double Sense of Rotation) BLADE TIP SPEED 1 m/sec. HYDRAULIC MOTOR piston REAR ADJUSTABLE ROLLER (three position) (R Serie) WEAR RESISTANT SIDE SKIDS adjustable in height (R and RF Serie) FLOATING SYSTEM mechanical and hydraulic TRANSMISSION toothed belt and pulley Standard equipment CABLE REMOTE CONTROL EMERGENCY CABLE CONTROL BEACON LIFTING HOOKS ADDITIONAL ELECTRICAL CONNECTOR HYDRAULIC QUICK COUPLINGS FIRST AUXILIARY HYDRAULIC INTUITIVE CONTROL BOX WITH DISPLAY EMERGENCY PUSH BOTTON ROLL BAR BIOLOGIC OIL TOWBAR SECOND AUXILIARY HYDRAULIC (TRACK Serie) FRONT HOOD OPENING KIT FOR FLAIL HEAD (RF Serie) Optional equipment SECOND AUXILIARY HYDRAULIC (FLEX Serie) TABLE LIGHT TRIANGLE (500 mm) SPOTLIGHT PAINTING ON REQUEST WINCH FRONT HOOD OPENING KIT FOR FLAIL HEAD (R Serie - Only Extra C.E. countries) FLAIL HEAD SIDESHIFT KIT Interchangeable tools SNOW BLADE SNOW BLOWER SWEEPER SPUMP GRINDER TRENCHER
Remote control slope mower icut4 - EN - 01.15-250 - campbelladv.com - 68214 Ferri srl Via Govoni, 30-44034 Tamara (FE) Italy Tel. +39 0532 866866 - Fax +39 0532 866851 www.ferrisrl.it - info@ferrisrl.it FERRI France Plaine de Fontgrave - 81800 RABASTENS Tél. +33 (0)5 63 40 84 00 - Fax +33 (0)5 63 40 84 08 www.ferri-france.fr - contact@ferri-france.fr www.icut4.com