Product information Contents scalamobil S35 scalacombi S36 Overview 52 Product advantages 53 Product components 54 Scope of delivery 55 2 Accessories 56 scalacombi S36 58 scalachair X3 59 scalachair X3 accessories 60 scalaport X7 61 Technical data 62 51
Overview S35 Climbing stairs the easy way. 52
Product information Product advantages Product advantages scalamobil is one of the key components of the Alber mobility concept. With scalamobil, you can climb any staircase safely and with minimum effort. Main product advantages at a glance: Safety and comfort for wheelchair occupant and operator scalamobil even masters narrow and spiral staircases as well as stairs of any type of material with a step height of up to 20 cm. The patented climbing mechanism thereby protects the stair covering against damage. The innovative ErgoBalance handles can be individually adjusted in height and width, allowing safe and effortless handling. scalamobil can be installed on most wheelchairs via a specialised bracketsystem Attached to the wheelchair in seconds, without the need of any tools scalamobil can be quickly dismantled into three light-weight parts for transportation Patented IQ feature with safety sensors: programmable according to stair geometry, wheelchair and weight of wheelchair occupant SoftStep feature for smooth stair climbing thanks to electronic control of the climbing speed, based on the height of the step and the angle of inclination Wheelchair attachment Standard wheelchairs Active and lightweight wheelchairs Comfort wheelchairs Hemiplegic chairs Paediatric wheelchairs Chairs for rescue services The only requirement for using scalamobil is stub axles on the chair. Alber can provide retrofitting with stub axles on request. Certain wheelchair manufacturers provide special frames with an integrated bracket for scalamobil. For information regarding the compatibility of your wheelchair, please contact our customer service department. For an up-to-date list of all wheelchair models that are compatible with scalamobil, see our website at www.alber.de. 2 Our quality standard your safety guarantee Test mark and institute TÜV Süd, Hanover CE conformity Tested and approved for application class: X Class A Indoor use Conforms to the EU Directive for Medical Devices Class B Class C (indoor and outdoor use) (outdoor use) Other tests Awards Usability study by Stiftung Vollmarstein Climbing operation: Move scalamobil to the edge of the step climb up or down the step move to the edge of the next step. 53
Product components scalamobil S35 with ErgoBalance handles Dismantled for transportation scalamobil S28 with climbing height extension for step heights of 21 to 25 cm 54
Product information Scope of delivery Handlebar The softly padded ErgoBalance handles have been developed by specialists for optimum grip and operation with minimum effort. Separate control elements to preselect the climbing direction and to start climbing operation Ergonomically designed drive switch for fatigueless operation SoftTouch comfort pad at the rear side of the control unit Left and right handle are horizontally adjustable to adjust to the build of the operator and for use in confined staircases Stepless height adjustment of handlebar Contact to drive unit is established automatically when being attached (no cable or plug) 2 Display Clearly arranged display with indication of direction and battery warning Activation of drive away lock with magnetic key Backlit ON/OFF main switch E-box with control elements Interface for the programming and configuration of the IQ feature Switch for activation/deactivation of single step mode Stepless adjustment of climbing speed 6 19 steps/minutes Climbing unit with automatic safety brakes Patented climbing mechanism, designed for use on virtually any stair Tyres made in a non-abrasive material, protecting the stair covering against damage Four automatic safety brakes stop scalamobil at the edge of each step. With larger diameter to overcome minor obstacles more easily Lightweight housing in sturdy aluminium Practical carrying handle for easy loading and transport Equipped with bolts for attachment to wheelchair Battery pack Range of up to 300 steps with a single battery charge (weight of person approx. 70 kg) Quickly replaceable, to extend range of scalamobil Battery can also be charged when separated from scalamobil Automatic battery charger Electronic charge and switch-off mechanism LED indicating status of charging process Automatic adaptation to mains voltage 90 V - 240 V (practical for travelling) 55
Accessories scalamobil S28 with climbing height extension (without ErgoBalance handles and IQ feature) For steps up to 25 cm in height A modified frame is required for use with scalachair X3 Also available with integrated seat unit (scalafly) or universal adapter scalaport X6 Bracket For attachment of scalamobil to the wheelchair (if not installed, please order with scalamobil) Please indicate wheelchair type, seat width and seat height Brackets for scalamobil are compatible with viamobil V15 Conversion from screw to stub axles As the large wheels of the wheelchair need to be removed to climb a stair with scalamobil, the wheelchair must be equipped with a quick-release system. Conversion kit consisting of hub, spokes, stub axles, adapter sleeves and installation instructions Available for standard hubs and hubs with drum brakes Special bracket system for paediatric wheelchairs For the attachment of paediatric wheelchairs with a minimum seat width of 28 cm For the attachment of narrow wheelchairs for adults with a seat width under 40 cm Max. weight of person 60 kg Alternatively, scalaport X7 can be used to transport narrow wheelchairs with a seat width from 26 cm Tilt bar Facilitates the tilting of the wheelchair when driving over obstacles (not compatible with scalachair X3) Mounted on the wheelchair bracket for scalamobil (must be removed for stair climbing) 56
Product information Accessories Safety lap belt With tried and tested safety quick-locking buckle 90 cm long Easy installation on wheelchair Anti-tippers 2 With quick-release mechanism Adjustable in height and length With automatic swivelling function for the crossing of curbs and steps Mounted on the wheelchair bracket for scalamobil attachment (must be removed for stair climbing) Headrest Ensures optimum support and stability for the head and neck area during stair climbing With clip function for scalamobil and scalacombi With soft padding Adjustable in height, depth and angle of inclination Wheel transport bracket For the transport of the wheelchair wheels with scalamobil The wheels do not need to be removed Bracket is compatible with most wheelchair models Car charger NEW! Battery pack can be charged in the car during travel Automatic charge and switch-off mechanism (function depending on vehicle used) Display with indication of charging status Input 12 V 32 V 57
scalacombi S36 Product advantages With integrated seat unit, for the transport of persons that do not depend on a wheelchair Ideal for narrow staircases and confined spaces that might be too small for a wheelchair Attractively designed seat and backrest with soft padding Steering front wheels with parking brake Swivelling armrests for easy access to seat Easily foldable for storage Dismantling for transport takes only a few seconds Upgradeable with climbing height extension for steps of up to 25 cm in height (scalafly) Conforming to CE Directive for Medical Devices scalacombi S36 Technical data (A) Overall length from rear wheel to front edge of footrest 73 cm (B) Length from rear wheel to front edge of seat 57 cm Foldable for easy storage Dismantled for transport (C) Overall width (with armrests) 49 cm (D) Seat width 35 cm (E) Seat depth 45 cm C (F) Seat height above floor at rear 45 cm D (G) Seat height above floor, front (H) Ground clearance of footrest 47 cm 3 cm G E F Total weight 37.5 kg Weight of seat unit Max. weight of person 12.5 kg 140 kg* A B Max. permissible total weight 180 kg* * For details regarding the maximum permissible weight of the person, see note regarding weights 58
Product information scalachair X3 Product advantages Comfortable push wheelchair designed for use with scalamobil Integrated bracket for scalamobil Great manoeuvrability and functionality thanks to compact dimensions Specially suitable for use at home and around the house Can be equipped with seat shells (not available from Alber) 2 Function Cushions can be removed for washing and provide good user comfort. The soft wheels with integrated brakes allow easy pushing. The scalachair X3 is easily folded away by hand (optional), does not require a lot of storage space. scalastuhl X3 (available as folding or rigid model) Technical data (A) Seat width (B) Overall width (C) Overall height 41.0 cm 51.0 cm 95.0 cm To provide optimum safety and comfort during stair climbing, the backrest is extended to support the shoulder area of the user. The footrest can be folded upwards to allow toe contact to the floor. The integrated bracket with automatic centring mechanism ensures fast and safe docking to the scalamobil. To allow for easy reseating, the armrests can be folded upwards out of the way. (D) Depth with footrest (E) Depth without footrest 65.0 cm 42.0 cm B Depth with scalamobil (F) Seat height 80.0 cm 45 cm F A C i For combined use with S28, modifications to the frame are required. Weight 12.8 kg D E 59
scalachair X3 accessories Braces belt system with foot belt for scalachair X3 Push handles for scalachair X3 adjustable in height Headrest for scalachair X3 Adjustable in height and depth Foot belt for scalachair X3 Lap belt for scalachair X3 60
Product information scalaport X7 Product advantages Wheelchairs can be attached to scalamobil without the need for any bracket or modification Compatible with all conventional wheelchairs; also suitable for paediatric wheelchairs with seats of minimum 26 cm in width Ideal for professional wheelchair transporting services and public buildings Easy to transport thanks to innovative folding mechanism 2 scalamobil S35 with scalaport X7 Easy clamping mechanism at backrest Folding mechanism for easy transport Quick adjustment to wheelchair width Dimensions Minimum Maximum 1 Wheelchair wheel distance 39 cm at inside 73 cm at outside 2 Seat height, rear of wheelchair approx. 35 cm above ground 3 Wheelchair frame height 14 cm above ground 4 Backrest width 35 cm* *with adapter: 26 cm Weight of scalaport without scalamobil 11 kg System weight 35.5 kg Max. weight of person 120 kg * Max. total weight 160 kg * 55 cm* * with adapter: 40 cm * For details regarding the maximum permissible weight of the person, see note re. weights 61
45 cm 115 cm Technical data Battery pack Battery cells, range: i 2 x 12 V; 3.4 Ah; Leak-proof and maintenance-free, range up to 300 steps (corresponding to approx. 20 floors, depending on the weight of the wheelchair user and the wheelchair) Climbing unit Max. weight of person i 140 kg* Max. total weight i 180 kg* Step height max. 20 cm S28 with climbing height extension up to 25 cm Step depth min. 11 cm (13 cm for S28) Motor power rating Climbing speed Operating voltage i 176 W 6 19 steps/minute 24 V Battery charger Input voltage 90 240 V (AC), 50 60 Hz; automatic adaptation to mains voltage Output voltage 24 V (DC) Charging current 1 A Battery charging time approx. 3.5 h Weights Total weight 25 kg Climbing unit with battery Climbing unit without battery 20.1 kg 17.4 kg Battery pack 2.7 kg Handlebar 4.9 kg * Depending on suitability of operator and wheelchair model. See also note re. weight specifications Conforming to CE Directive for Medical Devices 43 cm - 52 cm 36 cm 34 cm 62