INSULRIP Plugs and Connectors INSULRIP Plugs and Connectors
Technical Information HBL5266C HBL5269C INSULRIP Plugs and Connectors Specifications Plug Part Description Typical Specification Catalog No. HBL5266C Plug 15A Manufacturer s Identification Hubbell HBL5266C Plug Housing Nylon Black Blade Holder Nylon Natural Description Straight Body Plug Retainer Polycarbonate Clear Type 2 Pole, 3 ire, rounding Cord Clamp Nylon Natural Rating 15A, 125V Contact Blades.060" (1.5) Brass Certification UL Listed File E1706, CSA Certified round Contact Blade.040" (1.0) Copper Alloy IP Suitability Binding Screws Brass Combination Phillips/Slotted Hex. HD. Binding Screw Brass (reen) Phillips/Slotted ire Clamps.062" (1.5) steel Nickel Finish Connector Part Description Typical Specification Catalog No. HBL5269C Connector 15A Manufacturer s Identification Hubbell HBL5269C Housing Nylon Black Connector Contact Holder Nylon Natural Description Straight Body Connector Retainer Polycarbonate Clear Type 2 Pole, 3 ire, rounding Cord Clamp Nylon Natural Rating 15A, 125V Contacts.040" (1.0) Copper Alloy Certification UL Listed File E1706, CSA Certified Binding Screws Brass Combination Phillips/Slotted (15A only) r. Hex. HD. Binding Screw Brass (reen) Phillips/Slotted IP Suitability ire Clamps.062" (1.5) steel Nickel Finish Performance Electrical Dielectric Voltage Max. orking Voltage Current Interrupting Temperature Rise Mechanical Terminal Identification Terminal Accommodation Product Identification Torque Range Cord Diameter Range Environmental Flammability Operating Temperatures ithstands 2,000V minimum. 125V or 250V as rated. Certified for current interrupting at full rated current. Max 30 C temperature rise at full rated current after 50 cycles of overload at 150% of rated current with direct current. Terminals identified in accordance with UL498 (Brass, hite, reen). #18-10 A. Ratings are a permanent part of the device. Cord clamp/terminal screws 9 to 12 in. lbs..230".720" (5.8 18.3) Integral cord grip. UL 94 HB or better. Maximum continuous 60 C, minimum 40 C (w/o impact). Please consult the factory for product dimensions and specifications for other products listed in this catalog. Note: Insulgrip products with CN suffix feature combination Robertson/slotted screws. A-46 Dimensions in Inches (mm)
INSULRIP 15 & 20 Ampere Plugs and Connectors Featuring Integral VARI-SIZE Cord rip Individually molded face for each blade configuration keeps debris out of plug interior. Roomy wiring chamber provides ample space for wiring. Individual wiring terminals completely enclosed in their own separate chambers. Powerful, offsetting cord grips clamp on individual conductors and outer cord jacket to prevent strain on terminals. Ribbed nylon housing is impact and chemical resistant. Bevelled housing prevents snagging when dragged across uneven surfaces. Integral VARI-SIZE insert adjusts to a wide range of cord sizes:.230-.720. Combination Phillips/slotted* head screws provide screwdriver versatility. Pocketed recess for cord grip screws deter slippage of the screwdriver. VARI-SIZE pointer set to smaller than gauge position. Cord diameter range is.230 -.360 (5.8-9.0). Accepts slotted and Phillips head drivers. Transparent angled wiring entrance holes permit straight in conductor insertion. Catalog number is visible on the device while in use for easy identification. Powerful offsetting cord grips clamp on individual conductors and outer cord jacket to prevent strain on terminations. *Combination Robertson/slotted screws available on certain configurations and are indicated with CN suffixes in the catalog. A-20
2 Pole, 3 ire rounding 15 and 20 Ampere, 125 Volts INSULRIP Heavy Duty Plugs Insulgrip Plugs Black and white nylon..230-.720" HBL5266C HBL5366C Corrosion resistant yellow nylon..230-.720" HBL52CM66C HBL53CM66C 8-position angle plug, black.325-.655" HBL5266CA HBL5366CA and white nylon. (8.3-16.6) 8-position angle plug,.325-.655" HBL5266CAT transparent enclosure. (8.3-16.6) Anchor lock, black and.230-.720" HBL5280C white nylon. Anchor lock, corrosion resistant.230-.720" HBL52CM80C yellow nylon. Finger grip, black neoprene,.312-.468" HBL5921 slotted screws. (7.9-11.9) Fusible, black vinyl housing,.296-.625 HBL5299 slotted screws. (7.5-15.9) Insulgrip Plugs Robertson /Slotted Screws Black and white nylon..230-.720" HBL5266CCN HBL5366CCN Yellow and white nylon..230-.720" HBL5266CYCN 8-position angle plug,.325-.655" HBL5266CACN black and white nylon. (8.3-16.6) 8-position angle plug,.325-.655" HBL5266CATCN transparent enclosure. (8.3-16.6) Insulgrip, Hospital rade Plugs Black and white nylon..230-.720" HBL8215C HBL8315C Transparent housing..230-.720" HBL8215CT HBL8315CT 8-position angle plug,.250-.655" HBL8215CAT HBL8315CAT transparent enclosure. (6.4-16.6) Insulgrip, Hospital rade Plugs Robertson / Slotted Screws Black and white nylon..230-.720" HBL8215CCN Transparent housing..230-.720" HBL8215CTCN 8-position angle plug,.250-.655" HBL8215CATCN transparent enclosure. (6.4-16.6) Notes: Horsepower ratings listed above are AC only. * UL component listed only. Accessories Seal-Tite triple seal black elastomer cover for Insulgrip plugs when used in a cord set, and connectors when used with flanged inlets. Same as above except yellow elastomer. PLUOUT Lockout device for Hubbell plugs and others. HBL6017* HBL60CM17* HLD Notes: See page A-43 for accessories. See page A-46 for technical information. NEMA 5-15P 15A 125V 0.5 HP NEMA 5-20P 1 HP Discontinued when stock is exhausted HBL5266C 1.22" (30.9) HBL5266CA HBL5280C HBL8215C 1.22" (30.9) HBL8215CAT 2.11" (53.6) 2.11" (53.6) Straight Blade Devices 15A & 20A, 125V, 2P 3 Plugs Dimensions in Inches (mm) A-21
2 Pole, 3 ire rounding 15 and 20 Ampere, 125 Volts INSULRIP Connector Bodies 15A only Insulgrip Connector Bodies NEMA 5-15R 15A 125V NEMA 5-20R UL Listed HBL5269C Black and white nylon..230-.720" HBL5269C HBL5369C Black and white nylon..230-.720" HBL5269CCN * Corrosion resistant yellow nylon..230-.720" 52CM69C 53CM69C Steel armored, brown phenolic,.296-.625" 5269 slotted screws. (7.5-15.9) Insulgrip Hospital rade, Connector Bodies HBL8219C Black and white nylon..230-.720" HBL8219C HBL8319C Black and white nylon..230-.720" HBL8219CCN * Transparent enclosure..230-.720" HBL8219CT HBL8319CT Transparent enclosure..230-.720" HBL8219CTCN* *Note:Catalog numbers listed above with suffix CN have combination Robertson/ slotted head terminal and assembly screws. Accepts 20A plug only. Insulgrip Connector Bodies Robertson/ Slotted Screws 5-20R Canadian HBL6334CCN Heavy duty,.230-.720" HBL6334CCN black and white nylon. Hospital grade,.230-.720" HBL8319CCN black and white nylon. Notes: Connector bodies are not HP rated. See Section H for complete line of hospital grade devices. See page A-46 for technical information. See accessories at back of this section. Accessories Seal-Tite triple seal black elastomer cover for Insulgrip connector bodies when used in a cord set. Same as above except yellow elastomer. Closure plug, black. Closure plug, yellow. PLUOUT Lockout device for Hubbell connectors and others HBL6018* HBL60CM18* HBL6019 HBL60CM19 HLD Notes: *IP55 suitability if closure plug inserted or when installed and used properly with HBL6017 or HBL60CM17. A-22 Dimensions in Inches (mm)