MATERIAL HANDLING MACHINE

MHL360 E MATERIAL HANDLING MACHINE Technical specifications Operating weight 43.5 t 48.8 t Engine output 190 kw Reach Up to 18 m Unique features State-of-the-art technologies and unsurpassed quality achieve a significant increase in efficiency Higher engine output, combined with Stage IIIB/Tier 4i emission standards compliance results in considerably lower emissions and fuel consumption Intelligent cockpit design and a user-friendly operator information system Closed swing circuit Hose rupture valves with regeneration on the lift and stick cylinders for fuel-efficient work

SETTING NEW STANDARDS IN PERFORMANCE The new MHL360 E More power, lower fuel consumption and that is just the beginning: The new MHL360 E raises the bar in the field of cutting-edge scrap handling technology with an even more sophisticated hydraulic system, energy recovery, and a highly comfortable cockpit than previous models. With its combination of power and reduced emissions, as well as a hydraulic system that is both powerful and sensitive at the same time, the machine makes it possible to complete even the most challenging material handling tasks smoothly and efficiently. With an operating weight of 43.5 48.8 tonnes and a reach of up to 18 m, the MHL360 E is a veritable scrap handling powerhouse Ideal for use at ports A new hydraulic system design provides improved handling capacity and efficiency Excellent stability thanks to a wide undercarriage base and reinforced steel structure BlueEVOLUTION technology means the MHL360 E is ready for today s strict emission standards 02

YOUR HIGH-SPEC WORK STATION Reducing the workload. Relieving the stress. The MHL360 E operator control environment sets new standards in ergonomics and comfort. Even on the toughest jobs, our exclusive new generation of air-cushioned driver seats make this a good place to work. Intuitive joystick control, a multi-function button and keys for direct access to individual machine functions all make machine operation simple. All the relevant information is clearly presented to the driver on a high-resolution, high-contrast display screen. Structural safety has also been improved by strengthening the protective steel cab structure to meet the latest EU Machinery Directive. The driver is assisted by a rear-view camera (fitted as standard), which provides an excellent overview of the region behind the machine. Ergonomically designed, well planned interior. Aided by the colour display and the operator console, the driver can easily control every major function from the quiet comfort of his seat in the centre of the soundproofed cab Standard equipment: the rear-view camera provides a wide-angle view of the area behind the machine Comfortable interior equipment driver s seat design based on latest ergonomics research Intuitive machine controls simple-to-operate joystick, direct access to key functions Everything in view job-relevant information clearly displayed on the central highres, highcontrast WVGA colour display screen, with anti-glare shield fitted as standard Simple start/stop button (operates when ignition switched on) Improved field of view and an even better view to the rear when reversing or performing complex manoeuvres thanks to the integral rear-view camera, fitted as standard The whole cab concept is designed to support the driver and lighten his load, and promote a comfortable and productive environment 03

FASTER AND MORE PRECISE THAN BEFORE The machine s sophisticated hydraulic system is yet another Terex Fuchs highlight The new hydraulic system design of the MHL360 E provides even greater power and handling efficiency than before. The use of separate circuit systems means that the swiveling unit can be forcefully started and stopped without this having an impact on the rest of the hydraulic system. In addition, it makes it possible to perform simultaneous swiveling and lifting maneuvers at high speeds with utmost precision even when handling large loads. The energy recovery system in the hydraulic system is also an innovation worth mentioning: When the superstructure retards, the braking energy is fed back into the main pump. Moreover, standard hose rupture valves with regeneration helps ensure that the system requires lower pump delivery rates, saving additional energy in the process. These features not only reduce the load on the engine, but also increase the machine s handling capacity up to 20% compared to the D-series while maintaining the same levels of fuel consumption. 04 The new MHL360 E features a highly efficient cooling system: Advanced flow design, self-regulating fan drive, and thermally insulated cooling systems provide outstanding cooling performance even under adverse conditions. Maintenance is easier by design: Special access steps, large standing platforms improve accessibility to all components, and a clearly-arranged electrical system all help reduce service complexity

PERFORMANCE UP, EMISSIONS DOWN BlueEVOLUTION : The future generation stronger, quieter and cleaner than ever Evolution means a continuous development of the good to the even better. Terex has employed this philosophy on our Terex Fuchs material handlers from the beginning, making us the innovation leader in this market. The driving force of these efforts is our aim to provide the most modern technologies and the best quality to you, our customer. BlueEVOLUTION represents our latest step forward, an all-embracing intelligent set of energy-related measures harmonizing, performance, resource saving, and operating costs. Efficiency and innovation are at the heart of BlueEVOLUTION. The new MHL360 E has been equipped with a more powerful turbo-diesel engine, which not only boasts an impressive increase in output, but also uses significantly less fuel protecting the environment and reducing your costs at the same time. The engine s high-performance cooling unit keeps the engine at the ideal temperature level, and thus increases its efficiency. The engine works in harmony with our load sensing hydraulic system, which provides the power you need on demand, but doesn t waste fuel generating excess hydraulic flow. The complete package offers a future-oriented solution for performance-oriented material handling businesses with a strong sense of responsibility who are already thinking of tomorrow today. The Terex Fuchs MHL360 E machine with BlueEVOLUTION technology meets strict TIER4i/IIIB emission limits Despite systematically reducing emission levels, engine power has been increased to 190 kw Low fuel consumption puts the brakes on operating costs caused by today s high oil prices Intelligent engine management and a high-performance cooling system protects against overloading and deliver real benefits in efficiency A powerful new heart beats quietly inside the Terex Fuchs MHL360 E: a 6-cylinder engine at the cutting edge of technology a great platform for efficient energy use. Through BlueEVOLUTION, we re not just helping your business, but also this blue planet we all live on Burner Fuel supply air pump Diesel particle filter 05

TECHNICAL DATA OPERATING WEIGHT WITHOUT ATTACHMENTS MHL360 Series E DIESEL ENGINE Manufacturer and model Design Engine control Type Engine output 43.5 t - 48.8 t Deutz 7.8 L6 4V 6-cylinder inline EMR IV 4-stroke diesel, common rail direct injection, turbocharger, controlled exhaust gas recirculation, diesel particulate filter with automatic regeneration 190 kw Nominal speed 2000 min -1 Displacement Cooling system Emission standard Air filter design Usable tank capacity 7.8 l Combi-cooler (coolant/charge air) with fan speed control system; optional reversing function Stage IIIB / EPA Tier 4 interim Two-stage filter with safety cartridge and pre-separator with discharge valve 653 l ELECTRICAL SYSTEM Generator Operating voltage Battery Lighting set Option TRAVEL DRIVE Maximum speed, 1st gear Maximum speed, 2nd gear 28 V / 100 A 24 V 2 x 12 V / 110 Ah / 750 A 2 x H3 headlamps, turn indicators and tail lights 20 kw or 30 kw DC generator with controls and insulation monitoring, driven by V-belt direct from diesel engine Hydrostatic travel drive via infinitely variable axial piston motor with directly mounted travel brake valve, two-speed manual gearshift, 4-wheel drive max. 5 km/h max. 15 km/h Gradeability max. 30 % Turning radius SWING DRIVE Swing gear Drive Upper carriage swing speed Swing brake Max. pivot torque 8.0 m Internally toothed double-row ball ring gear 3-stage planetary gear with integrated multi-disc brake 0-6 min -1 infinitely variable Electrically operated 91 knm UNDERCARRIAGE Front axle Rear axle Stabilizers Planetary drive axle with integrated drum brake, rigidly mounted, max. steering angle 27 Oscillating planetary drive rear axle with integrated drum brake and selectable oscillating axle lock 4-point stabilizers Tires Solid rubber, 8-ply 12.00-24 BRAKE SYSTEM Service brake Parking brake HYDRAULIC SYSTEM Hydraulic single-circuit braking system acting on all four wheel pairs Electrically operated disc brake on transmission, acting on both front and rear axles REXROTH mobile hydraulic system with load limit control and fuel-saving power demand control; closed swing circuit; hose rupture valves with regeneration on the lift and stick cylinders for fuel-efficient work Hydraulic oil filter Integral return filter in oil tank for work hydraulics, with 3000 operating hrs service interval; oil filtration on closed swing circuit Max. Pump capacity Max. Operating pressure Hydraulic oil tank OPERATOR CAB Cab raising system Heating Operator s seat Monitoring Air conditioning Acoustic power level 2 x 280 l/min & 1 x 140 l/min (for swing operation) 320/360 bar 520 l usable tank capacity Elastically supported, infinitely variable hydraulically elevatable with max. eye level of 6.10m; independent forward movement of up to 2.20 m; Sound-deadened; heat-insulated windows for optimum view; windshield with pull-down sunblind that slides under the cab roof; viewing window on cab roof; sliding window in cab door; height and tilt-adjustable steering column Infinitely variable heating with 3-speed fan, 6 adjustable defroster nozzles (hot water system) Air-cushioned comfort-seat with integrated headrest, safety belt and lumbar support, seat heating with integrated A/C function optional. Comfortable operation with multi-purpose adjustment options for seat position, seat inclination, and seat cushion placement in relation to armrests and pilot control units Ergonomic layout; anti-glare instrumentation. Multifunction display, automatic monitoring and recording of abnormal operating conditions (including all hydraulic oil filters, hydraulic oil temperature (cold/hot) - coolant temperature and charge air temperature - diesel particulate filter load), visual and audible warning indication with shutdown of pilot controls/engine power reduction. Diagnosis of individual sensors possible via the multifunction display. Rear view camera Automatic L W(A) = 102 db(a) (guaranteed) in accordance with directive 2000/14/EC OFFICIAL HOMOLOGATION Certified in accordance with CE regulations 06

EQUIPMENT MHL360 E ENGINE STANDARD OPTION UNDERCARRIAGE STANDARD OPTION Exhaust gas turbocharger All-wheel drive with differential Charge air cooling Drum brakes Direct electronic fuel injection/common rail Rear axle oscillating lock Automatic idle 2-speed powershift transmission Engine preheating 4-point stabilizers Engine diagnostics interface Stabilizer cylinders with integrated two-way check valves System-controlled fan drive with fan speed monitoring Piston rod protection on stabilizer cylinders Stabilizer plates 510 mm x 665 mm CAB STANDARD OPTION 4-point stabilizers, individually controllable Cab system horizontally and vertically adjustable Dozer blade with plastic or Hardox edge (in addition to 4-point stabilizers) Safety glass Tool box Hinged windscreen Special paint (customer paint work) Sliding window in cab door Glazed roof panel EQUIPMENT STANDARD OPTION Hinged roof opening 20 kw DC generator with controls and insulation monitoring Reinforced glass (windscreen and roof panel) 30 kw DC generator with controls and insulation monitoring Windscreen washer system Close proximity range limiter for dipperstick Windshield washer system (lower portion of windshield) Coolant and hydraulic oil level monitoring system Air-cushioned operator seat with headrest, seatbelt, and lumbar support Filter system for attachments Seat heating with integrated A/C function Hose rupture value for boom cylinder Steering column, height and tilt adjustable Hose rupture value for stick cylinder Automatic air conditioning system Overload warning device Independent heating system Quick coupling on dipperstick Multi-function display Cut-off ball valve on dipperstick Document clip Dipperstick impact protection Protective grilles to front and roof Cyclonic pre-separator for air-filter 12V transformer Hydraulic oil preheating 230 V Radio CD player Float switch 12V power outlet Joystick steering Fire extinguisher, dry powder Lubrication of the grab suspension by central lubrication system Rotating beacon H3 headlamps H3 worklights on boom and dipperstick (up to 4) UPPER CARRIAGE STANDARD OPTION Xenon worklights on boom and dipperstick (up to 4) Separate cooling systems (combi-cooler for engine and hydraulic oil Front-mounted Xenon worklights (up to 2) cooler) Xenon worklights on cab roof (up to 4) Cooling system fan speeds controlled by operating parameters Fan drive reversing function Further optional equipment on request Lockable maintenance hatches, with gas struts Automatic central lubrication system Rear view camera Reversing alarm Electric refuelling pump Lighting protection Special paint (customer paint work) 07

DIMENSIONS MHL360 E 195 3315 1595 2900 3555 540 1935 3200 5980 1700 2940 3000 3000 4520 5030 TRANSPORT DIMENSIONS MHL360 E Loading system 18 m cranked: Undercarriage equipped with dozer blade, rotated by 180 290 615 E D 195 2010 Avg. center of gravity in transport position B 1900 C A Dimensions Reach 16.5 m Reach 18.0 m Reach 18.0 m cranked A 13.830 mm 14.615 mm 14.610 mm B 6.375 mm 6.400 mm 5.915 mm C 1.715 mm 1.715 mm 1.715 mm D 3.555 mm/3.750 mm* 3.555 mm/3.750 mm* 3.555 mm/3.750 mm* E 3.400 mm 3.700 mm 3.750 mm * with a protective mesh for the cab roof LOADING SYSTEM WITH DIPPERSTICK MHL360 E Components 16.5 m 18.0 m 18.0 m cranked Straight boom 8.9 m Straight boom 9.7 m Cranked boom 9.7 m Dipperstick 7.0 m Dipperstick 7.8 m 08

WORKING RANGES/LIFTING CAPACITIES MHL360 E REACH 16.5 M WITH DIPPERSTICK Loading system Boom 8.9 m, Dipperstick 7.0 m, Cactus grab 0.8 m 3 open RECOMMENDED ATTACHMENTS Terex Fuchs cactus grab 0.6 m 3 Terex Fuchs cactus grab 0.8 m 3 Terex Fuchs cactus grab 1.0 m 3 Terex Fuchs MAGNETIC PLATE MP 1350 dia. = 1350 mm with magnet system 30 kw Clamshell grab 1.4 m 3 Loose goods density up to 1,600 kg/m 3 Clamshell grab 2.0 m 3 Loose goods density up to 800 kg/m 3 Lift hooks 20 t The lift capacity values are stated in metric tons (t). The pump pressure is 360 bar. In accordance with ISO 10567 the lift capacity values represents 75% of the static tipping loads or 87% of the hydraulic lifting force (marked ). On solid and level ground the values apply to a swing range of 360. The (...) values apply in the longitudinal direction of the undercarriage. The values for not supported only apply via the steering axle or the locked oscillating axle. The weights of the attached load hoisting equipment (grab, load hook, etc.) must be deducted from the lift capacity values. The working load of the lifting devise must be observed. In accordance with the EN 474-5 for object handling application hose rupture valves on the boom and stick cylinders, an overload warning device and the lift capacity table in the cab are required. For object handling application the machine has to be supported on a level ground. 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0-1 -2-3 -4-5 -6-7 -8 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 3Reach in m Height m 15 13.5 12 10.5 9 7.5 6 4.5 3 1.5 0-1.5-3 -4.5 2.7 Undercarriage Reach m stabilization 6 7.5 9 10.5 12 13.5 15 16.5 Without stabilizers (8.4 ) (5.8 ) With 4-pt stabilizers 8.4 (8.4 ) 5.8 (5.8 ) Without stabilizers (8.7) (6.7) (5.2) With 4-pt stabilizers 9.3 (9.3 ) 8.3 (8.3 ) 5.8 (5.8 ) Without stabilizers (8.8) (6.8) (5.3) (4.2) With 4-pt stabilizers 9.2 (9.2 ) 8.2 (8.2 ) 7.5 (7.5 ) 5.0 (5.0 ) Without stabilizers (8.8) (6.8) (5.3) (4.3) With 4-pt stabilizers 9.2 (9.2 ) 8.2 (8.2 ) 7.4 (7.4 ) 6.5 (6.7 ) Without stabilizers (8.6) (6.7) (5.3) (4.3) (3.4) With 4-pt stabilizers 9.4 (9.4 ) 8.3 (8.3 ) 7.5 (7.5 ) 6.4 (6.7 ) 5.3 (5.6 ) Without stabilizers (11.2 ) (8.4) (6.5) (5.2) (4.2) (3.4) With 4-pt stabilizers 11.2 (11.2 ) 9.7 (9.7 ) 8.5 (8.5 ) 7.6 (7.6 ) 6.4 (6.8 ) 5.3 (6.0 ) Without stabilizers (14.8 ) (10.6) (8.0) (6.2) (5.0) (4.1) (3.4) With 4-pt stabilizers 14.8 (14.8 ) 12.2 (12.2 ) 10.2 (10.2 ) 8.8 (8.8 ) 7.6 (7.7 ) 6.3 (6.8 ) 5.2 (6.0 ) Without stabilizers (13.8) (9.9) (7.5) (5.9) (4.8) (3.9) (3.3) (2.7) With 4-pt stabilizers 17.0 (17.0 ) 13.1 (13.1 ) 10.7 (10.7 ) 9.0 (9.0 ) 7.4 (7.8 ) 6.1 (6.8 ) 5.2 (6.0 ) 4.4 (4.8 ) Without stabilizers (12.3) (9.0) (7.0) (5.6) (4.6) (3.8) (3.2) (2.7) With 4-pt stabilizers 18.4 (18.4 ) 13.8 (13.8 ) 10.9 (10.9 ) 8.7 (9.2 ) 7.1 (7.9 ) 6.0 (6.8 ) 5.1 (5.8 ) 4.4 (4.8 ) Without stabilizers (11.1) (8.3) (6.5) (5.3) (4.4) (3.7) (3.1) (2.7) With 4-pt stabilizers 12.2 (12.2 ) 13.6 (14.0 ) 10.4 (11.2 ) 8.4 (9.2 ) 6.9 (7.8 ) 5.8 (6.7 ) 5.0 (5.6 ) 4.3 (4.4 ) Without stabilizers (9.1 ) (7.8) (6.2) (5.0) (4.2) (3.5) (3.0) (2.7) With 4-pt stabilizers 9.1 (9.1 ) 13.0 (13.6 ) 10.0 (10.9 ) 8.1 (9.0 ) 6.7 (7.5 ) 5.7 (6.4 ) 4.9 (5.2 ) 3.8 (3.8 ) Without stabilizers (8.9 ) (7.5) (6.0) (4.9) (4.1) (3.5) (3.0) With 4-pt stabilizers 8.9 (8.9 ) 12.6 (12.6 ) 9.8 (10.2 ) 7.9 (8.5 ) 6.6 (7.0 ) 5.6 (5.8 ) 4.6 (4.6 ) Without stabilizers (9.6 ) (7.4) (5.8) (4.8) (4.0) (3.4) (3.0) With 4-pt stabilizers 9.6 (9.6 ) 10.9 (10.9 ) 9.1 (9.1 ) 7.5 (7.5 ) 6.2 (6.2 ) 5.0 (5.0 ) 3.6 (3.6 ) Without stabilizers (7.5) (5.8) (4.8) (4.0) With 4-pt stabilizers 8.7 (8.7 ) 7.4 (7.4 ) 6.2 (6.2 ) 5.0 (5.0 ) max. reach 16.7 m Without stabilizers (2.6) With 4-pt stabilizers 4.0 (4.0 ) 09

WORKING RANGES/LIFTING CAPACITIES REACH 18 M WITH DIPPERSTICK Loading system Boom 9.7 m, Dipperstick 7.8 m, Cactus grab 0.8 m 3 open RECOMMENDED ATTACHMENTS Terex Fuchs cactus grab 0.6 m 3 Terex Fuchs cactus grab 0.8 m 3 Terex Fuchs MAGNETIC PLATE MP 1350 dia. = 1350 mm with magnet system 30 kw Clamshell grab 1.4 m 3 Loose goods density up to 1,600 kg/m 3 Clamshell grab 2.0 m 3 Loose goods density up to 800 kg/m 3 Lift hooks 20 t The lift capacity values are stated in metric tons (t). The pump pressure is 360 bar. In accordance with ISO 10567 the lift capacity values represents 75% of the static tipping loads or 87% of the hydraulic lifting force (marked ). On solid and level ground the values apply to a swing range of 360. The (...) values apply in the longitudinal direction of the undercarriage. The values for not supported only apply via the steering axle or the locked oscillating axle. The weights of the attached load hoisting equipment (grab, load hook, etc.) must be deducted from the lift capacity values. The working load of the lifting devise must be observed. In accordance with the EN 474-5 for object handling application hose rupture valves on the boom and stick cylinders, an overload warning device and the lift capacity table in the cab are required. For object handling application the machine has to be supported on a level ground. 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0-1 -2-3 -4-5 -6-7 -8-9 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 3Reach in m Height m 15 13.5 12 10.5 9 7.5 6 4.5 3 1.5 0-1.5-3 -4.5-6 2.7 Undercarriage Reach m stabilization 6 7.5 9 10.5 12 13.5 15 16.5 18 Without stabilizers (8.8 ) (6.8) (5.3) With 4-pt stabilizers 8.8 (8.8 ) 7.9 (7.9 ) 6.3 (6.3 ) Without stabilizers (7.0) (5.5) (4.3) With 4-pt stabilizers 7.7 (7.7 ) 7.0 (7.0 ) 5.9 (5.9 ) Without stabilizers (7.0) (5.5) (4.4) (3.5) With 4-pt stabilizers 7.7 (7.7 ) 6.9 (6.9 ) 6.3 (6.3 ) 5.1 (5.1 ) Without stabilizers (6.9) (5.4) (4.4) (3.5) With 4-pt stabilizers 7.7 (7.7 ) 6.9 (6.9 ) 6.3 (6.3 ) 5.4 (5.7 ) Without stabilizers (8.8) (6.7) (5.3) (4.3) (3.5) (2.8) With 4-pt stabilizers 9.0 (9.0 ) 7.9 (7.9 ) 7.0 (7.0 ) 6.3 (6.3 ) 5.4 (5.7 ) 4.5 (5.1 ) Without stabilizers (8.4) (6.5) (5.2) (4.2) (3.4) (2.8) With 4-pt stabilizers 9.3 (9.3 ) 8.1 (8.1 ) 7.2 (7.2 ) 6.4 (6.4 ) 5.3 (5.7 ) 4.5 (5.1 ) Without stabilizers (10.7) (8.0) (6.2) (4.9) (4.0) (3.3) (2.7) With 4-pt stabilizers 11.8 (11.8 ) 9.8 (9.8 ) 8.4 (8.4 ) 7.3 (7.3 ) 6.2 (6.5 ) 5.2 (5.7 ) 4.4 (5.1 ) Without stabilizers (13.7) (9.8) (7.4) (5.8) (4.7) (3.9) (3.2) (2.7) (2.2) With 4-pt stabilizers 16.5 (16.5 ) 12.6 (12.6 ) 10.3 (10.3 ) 8.6 (8.6 ) 7.3 (7.4 ) 6.0 (6.5 ) 5.2 (5.7 ) 4.4 (5.0 ) 3.7 (4.2 ) Without stabilizers (12.0) (8.8) (6.8) (5.4) (4.4) (3.7) (3.1) (2.6) (2.2) With 4-pt stabilizers 17.8 (17.8 ) 13.3 (13.3 ) 10.6 (10.6 ) 8.6 (8.8 ) 7.0 (7.5 ) 5.9 (6.5 ) 5.0 (5.7 ) 4.3 (4.9 ) 3.7 (4.0 ) Without stabilizers (9.1 ) (8.0) (6.3) (5.1) (4.2) (3.5) (3.0) (2.5) (2.2) With 4-pt stabilizers 9.1 (9.1 ) 13.2 (13.5 ) 10.2 (10.7 ) 8.2 (8.8 ) 6.7 (7.5 ) 5.7 (6.4 ) 4.8 (5.5 ) 4.2 (4.7 ) 3.7 (3.7 ) Without stabilizers (6.9 ) (7.4) (5.9) (4.8) (4.0) (3.5) (2.9) (2.5) (2.1) With 4-pt stabilizers 6.9 (6.9 ) 12.6 (13.1 ) 9.7 (10.5 ) 7.9 (8.7 ) 6.5 (7.3 ) 5.5 (6.2 ) 4.7 (5.3 ) 4.1 (4.4 ) 3.3 (3.3 ) Without stabilizers (6.9 ) (7.1) (5.6) (4.6) (3.8) (3.2) (2.8) (2.4) With 4-pt stabilizers 6.9 (6.9 ) 12.1 (12.1 ) 9.4 (9.9 ) 7.6 (8.2 ) 6.4 (6.9 ) 5.4 (5.8 ) 4.7 (4.9 ) 3.9 (3.9 ) Without stabilizers (7.5 ) (6.9) (5.4) (4.4) (3.7) (3.2) (2.7) (2.4) With 4-pt stabilizers 7.5 (7.5 ) 10.7 (10.7 ) 8.9 (8.9 ) 7.5 (7.5 ) 6.2 (6.2 ) 5.3 (5.3 ) 4.3 (4.3 ) 3.2 (3.2 ) Without stabilizers (6.9) (5.4) (4.4) (3.7) (3.1) (2.7) With 4-pt stabilizers 8.8 (8.8 ) 7.6 (7.6 ) 6.4 (6.4 ) 5.4 (5.4 ) 4.4 (4.4 ) 3.4 (3.4 ) Without stabilizers (4.4) (3.7) With 4-pt stabilizers 5.0 (5.0 ) 4.1 (4.1 ) max. reach 18.2 m Without stabilizers (2.1) With 4-pt stabilizers 3.6 (3.8 ) 10

MHL360 E REACH 18 M CRANKED Loading system Cranked Boom 9.7 m, Dipperstick 7.8 m, Cactus grab 0.8 m 3 open RECOMMENDED ATTACHMENTS Terex Fuchs cactus grab 0.6 m 3 Terex Fuchs cactus grab 0.8 m 3 Terex Fuchs MAGNETIC PLATE MP 1250 dia. = 1250 mm with magnet system 30 kw Clamshell grab 1.4 m 3 Loose goods density up to 1,600 kg/m 3 Clamshell grab 2.0 m 3 Loose goods density up to 800 kg/m 3 Lift hooks 20 t The lift capacity values are stated in metric tons (t). The pump pressure is 360 bar. In accordance with ISO 10567 the lift capacity values represents 75% of the static tipping loads or 87% of the hydraulic lifting force (marked ). On solid and level ground the values apply to a swing range of 360. The (...) values apply in the longitudinal direction of the undercarriage. The values for not supported only apply via the steering axle or the locked oscillating axle. The weights of the attached load hoisting equipment (grab, load hook, etc.) must be deducted from the lift capacity values. The working load of the lifting devise must be observed. In accordance with the EN 474-5 for object handling application hose rupture valves on the boom and stick cylinders, an overload warning device and the lift capacity table in the cab are required. For object handling application the machine has to be supported on a level ground. 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0-1 -2-3 -4-5 -6-7 -8-9 -10 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0 3Reach in m Height m 15 13.5 12 10.5 9 7.5 6 4.5 3 1.5 0-1.5-3 -4.5-6 2.7 Undercarriage Reach m stabilization 6 7.5 9 10.5 12 13.5 15 16.5 18 Without stabilizers (6.5 ) (5.3) With 4-pt stabilizers 6.5 (6.5 ) 5.5 (5.5 ) Without stabilizers (5.4) (4.2) With 4-pt stabilizers 5.9 (5.9 ) 5.2 (5.2 ) Without stabilizers (5.5) (4.3) (3.4) With 4-pt stabilizers 5.8 (5.8 ) 5.4 (5.4 ) 4.4 (4.4 ) Without stabilizers (5.4) (4.3) (3.4) With 4-pt stabilizers 5.9 (5.9 ) 5.4 (5.4 ) 5.0 (5.0 ) Without stabilizers (6.6 ) (5.3) (4.2) (3.4) (2.7) With 4-pt stabilizers 6.6 (6.6 ) 6.0 (6.0 ) 5.5 (5.5 ) 5.1 (5.1 ) 4.4 (4.4 ) Without stabilizers (6.5) (5.1) (4.1) (3.3) (2.7) With 4-pt stabilizers 6.8 (6.8 ) 6.1 (6.1 ) 5.6 (5.6 ) 5.1 (5.1 ) 4.4 (4.7 ) Without stabilizers (7.9) (6.1) (4.9) (3.9) (3.2) (2.7) With 4-pt stabilizers 8.3 (8.3 ) 7.2 (7.2 ) 6.4 (6.4 ) 5.7 (5.7 ) 5.1 (5.1 ) 4.3 (4.7 ) Without stabilizers (13.7) (9.7) (7.3) (5.7) (4.6) (3.8) (3.1) (2.6) (2.1) With 4-pt stabilizers 14.0 (14.0 ) 10.8 (10.8 ) 8.9 (8.9 ) 7.6 (7.6 ) 6.6 (6.6 ) 5.9 (5.9 ) 5.0 (5.2 ) 4.3 (4.7 ) 3.6 (3.6 ) Without stabilizers (11.8) (8.7) (6.7) (5.3) (4.3) (3.6) (3.0) (2.5) (2.1) With 4-pt stabilizers 15.7 (15.7 ) 11.7 (11.7 ) 9.4 (9.4 ) 7.9 (7.9 ) 6.8 (6.8 ) 5.8 (6.0 ) 4.9 (5.3 ) 4.2 (4.7 ) 3.6 (4.0 ) Without stabilizers (10.4) (7.8) (6.1) (4.9) (4.1) (3.4) (2.8) (2.4) (2.1) With 4-pt stabilizers 10.6 (10.6 ) 12.4 (12.4 ) 9.8 (9.8 ) 8.0 (8.0 ) 6.6 (6.9 ) 5.6 (6.0 ) 4.7 (5.3 ) 4.1 (4.7 ) 3.6 (4.0 ) Without stabilizers (7.8 ) (7.2) (5.7) (4.6) (3.8) (3.2) (2.7) (2.3) With 4-pt stabilizers 7.8 (7.8 ) 12.3 (12.6 ) 9.6 (10.0 ) 7.7 (8.2 ) 6.4 (7.0 ) 5.4 (6.0 ) 4.6 (5.2 ) 4.0 (4.5 ) Without stabilizers (7.6 ) (6.8) (5.4) (4.4) (3.7) (3.1) (2.7) (2.3) With 4-pt stabilizers 7.6 (7.6 ) 11.9 (12.3 ) 9.2 (9.9 ) 7.5 (8.1 ) 6.2 (6.9 ) 5.3 (5.9 ) 4.5 (5.1 ) 4.0 (4.3 ) Without stabilizers (7.9 ) (6.6) (5.2) (4.2) (3.6) (3.0) (2.6) (2.3) With 4-pt stabilizers 7.9 (7.9 ) 11.6 (11.6 ) 9.0 (9.4 ) 7.3 (7.8 ) 6.1 (6.6 ) 5.2 (5.6 ) 4.5 (4.7 ) 3.9 (3.9 ) Without stabilizers (8.6 ) (6.6) (5.1) (4.2) (3.5) (3.0) (2.6) With 4-pt stabilizers 8.6 (8.6 ) 10.4 (10.4 ) 8.6 (8.6 ) 7.2 (7.2 ) 6.0 (6.0 ) 5.1 (5.1 ) 4.2 (4.2 ) Without stabilizers (9.3 ) (6.7) (5.2) (4.2) (3.5) (3.0) (2.7) With 4-pt stabilizers 9.3 (9.3 ) 8.9 (8.9 ) 7.5 (7.5 ) 6.3 (6.3 ) 5.3 (5.3 ) 4.4 (4.4 ) 3.3 (3.3 ) max. reach 18.1 m Without stabilizers (2.0) With 4-pt stabilizers 3.5 (3.5 ) 11

Powered by TCPDF (www.tcpdf.org) MHL360 E A history of great ideas since 1888 Powerful performance with low fuel consumption levels, extreme loading capacities, high speeds: These characteristics make the Terex Fuchs MHL360 E mobile material handling machine stand out among the competition and show how the unit s new generation has been fine-tuned even further in order to perfectly meet our customers needs. The fully reengineered hydraulic system design in particular provides previously inconceivable performance levels in terms of efficiency and speed, performing day after day of demanding work. And it goes without saying that operators will be able to control this powerhouse with utmost safety and precision from the unit s high-comfort cab, which has numerous features designed to provide a comfortable and ergonomic working environment. Product range/standard machines Ever since the business was founded in 1888, the Fuchs name has signified a wealth of ideas and innovation. Whether developing the legendary Fuchs 301 cable excavator in 1957 or patenting the elevatable cab in 1975, pioneering technical advances have shaped the brand s history right up to the present day, and helped Terex Fuchs machines to win their reputation for top quality workmanship and endurance. Terex Fuchs focuses its resources on clearly defined areas of application, offering highperformance materials handlers to the recycling, scrap handling, port and timber industries. This concentration on core sectors delivers important user benefits: instead of standard off-the-shelf products, we provide tailored, highly customisable machine solutions, which can be adapted to the precise needs of our customers. MHL320 MHL331 MHL335 MHL340 MHL340 FQC MHL350 MHL350 FQC MHL360 MHL380 MHL454 MHL474 85 kw 114 kw 114 kw 128 kw 128 kw 160 kw 160 kw 190 kw 273 kw 8.2-10.4 m 10.7-12.0 m 10.7-12.0 m 12.2-13.7 m 11.0-11.2 m 14.0-16.0 m 12.5-13.0 m 16.5-18.0 m 18.5-22.0 m 17.8-19.0 t 22.0-23.5 t 23.5-25.0 t 27.5-29.0 t 28.5-31.3 t 33.0-35.5 t 33.0-37.8 t 43.5-48.8 t 62.5-68.5 t 0.4-0.6 m 3 0.4-0.6 m 3 0.4-0.8 m 3 0.4-0.8 m 3 Attachments on request 0.6-0.8 m 3 Attachments on request 0.6-1.0 m 3 1.0-1.4 m 3 176 kw 213 kw 9.8-10.85 m 11.15 m 31.0-32.5 t 41.5-44.0 t 1.7-2.5 m 2 2.0-4.0 m 2 www.terex-fuchs.com Valid from: Juli 2012. Product specifications and prices are subject to change without notice or obligation. The photographs and/or drawings contained in this document are for illustrative purposes only. Please refer to the appropriate Operator s Manual for instructions on the proper use of this equipment. Failure to follow the appropriate Operator s Manual when using our equipment or to otherwise act irresponsibly may result in serious injury or death. The only warranty applicable to our equipment is the standard written warranty applicable to the particular product. Terex makes no other warranty, expressed or implied. Products and services listed may be trademarks, service marks or trading names of Terex Corporation and/or its subsidiaries in the USA and other countries. All rights reserved. Terex is a registered trademark of Terex Corporation in the United States of America and in many other countries. 2012 Terex Corporation.