*IMPORTANT: NOT ALL PRODUCTS IN THIS CATALOGUE ARE AVAILABLE EX-STOCK. PLEASE CONFIRM DELIVERY TIMES WHEN PLACING ORDERS. PAGE: 0 ISSUE DATE:

PAGE: 0 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Unable to find something in our Price List? Need further technical data? Contact our Sales Office on 07 3624 0300 or via email at sales@rodneyind.com.au and our Sales Staff will be able to assist. IRRIGATION FITTINGS RI RANGE TRAVELLING IRRIGATORS 1 26 BAUER FITTINGS WATER WINCH TRAVELLING IRRIGATORS 9 30 DRAGMASTER HOSE TURBO WINCH TRAVELLING IRRIGATORS 15 34 NELSON EXTENSION PIPES AND ADAPTORS HOSE TRAILERS 17 39 SPRINKLERS & GUNS COMPARISON CHART RAINSPAN SOFT HOSE BOOMS 20 41 NELSON BIG GUNS & SPRINKLERS MARANI HARD HOSE IRRIGATORS 21 53 SIME GUNS BRIGGS BOOMS 24 79

Manufactured from honed tube and then hot dipped galvanized, our range of half joiners are durable and reliable. Irrigation fittings may not be the most expensive component of your irrigation system, but they are essential never compromise on quality always choose Rodney s. PLAIN TO HALF JOINER SIZE CODE LIST PRICE 3 x 3½ 10004 $90.30 4 x 3 10989 $88.20 4 x 3½ 9899 $92.40 4 x 4 10012 $98.70 4 x 5 10024 $102.90 5 x 3½ 9987 $98.70 5 x 4 9988 $105.00 5 x 4½ 9989 $107.10 5 x 5 10999 $109.20 5 x 6 10025 $120.75 6 x 4 10023 $116.55 6 x 5 9900 $120.75 6 x 6 10998 $133.35 THREADED TO HALF JOINER SIZE CODE LIST PRICE 2½ x 2½ 9927 $89.25 2 x 3 9929 $92.40 2½ x 3 9930 $95.55 3 x 2½ 9926 $95.55 3 x 3 9931 $102.90 2½ x 3½ 9932 $98.70 3 x 3½ 9933 $105.00 2½ x 4 9934 $99.75 3 x 4 9935 $117.60 4 x 3½ 9937 $115.50 4 x 4 9936 $121.80 4 x 4½ 9938 $127.05 4 x 6 9939 $180.60 PAGE: 1 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Our range of Flange to Half Joiners are standard with Table D flanges. Although this is the most common flange type for this fitting, if you need it changed, please do not hesitate to contact our Sales Department for pricing. For nuts and bolts, please refer to our Metals pricelist. FLANGE TO HALF JOINER SIZE CODE LIST PRICE 2 x 2½ 9944 $92.40 2½ x 3 9946 $102.90 3 x 3 9947 $112.35 4 x 2½ 10033 $101.85 4 x 3 9948 $115.50 3 x 3½ 9949 $116.55 4 x 3½ 9950 $120.75 5 x 3½ 9951 $124.95 6 x 3½ 9952 $141.75 3 x 4 9953 $120.75 4 x 4 9964 $123.90 4 x 5 9961 $126.00 5 x 4 9954 $241.50 6 x 4 9955 $136.50 4 x 4½ 9956 $126.00 5 x 4½ 9957 $132.30 6 x 4½ 9958 $143.85 5 x 5 10007 $141.75 5 x 6 10008 $159.60 6 x 5 9960 $149.10 6 x 6 9962 $163.80 JOINER RING ONLY SIZE CODE LIST PRICE 2 9901 $21.00 2½ 9902 $26.25 3 9903 $29.40 3½ 9904 $33.60 4 9905 $36.75 4½ 9906 $38.85 5 9908 $39.90 6 9910 $47.25 PAGE: 2 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Available in both standard and reducing, our galvanized Hose Joiners are reliable and cost effective. The machined end also means that the fitting does not damage the hose. Why not suggest our hose joiners to your customer the next time they need to repair their hose - simple solution. HOSE JOINERS SIZE CODE LIST PRICE 2 9980 $64.05 2½ 9981 $70.35 3 9982 $82.95 3½ 9983 $94.50 4 9984 $131.25 4½ 9985 $147.00 5 10005 $157.50 6 10006 $178.50 HOSE JOINERS REDUCING SIZE CODE LIST PRICE 2 ½ x 3 10031 $91.35 3 x 3½ 10003 $100.80 3 x 4 9986 $108.15 3½ x 4 9978 $126.00 4 x 4½ 9979 $147.00 PAGE: 3 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

We have a range of Couplers available for your irrigation system. So which one is best suited to your requirement? Coupler Joiner: Ring Type Coupler: Standard Coupler: For joining the hydrant to ring type coupler. For coupling the irrigator to the hydrant. Heavy duty coupling from irrigator to hydrant. COUPLER JOINER SIZE CODE LIST PRICE 3 x 3 9973 $157.50 4 x 3 9974 $166.95 4 x 4 9975 $173.25 STANDARD COUPLERS SIZE CODE LIST PRICE 3½ x 4 9993 $224.70 4 x 4 9994 $234.15 4½ x 4 9995 $259.35 RING TYPE COUPLER SIZE CODE LIST PRICE 2½ x 3 9990 $75.60 2 ½ x 4 9996 $91.35 3 x 3 9991 $84.00 3 ½ x 3 10002 $89.25 3 x 4 9992 $94.50 3 ½ x 4 9997 $98.70 3 ½ x 5 10014 $102.90 4 x 4 9998 $102.90 4 x 5 10015 $107.10 4 ½ x 4 9999 $105.00 4 x 3 10000 $99.75 4 ½ x 5 10001 $117.60 5 x 4 10010 $127.05 5 x 5 10018 $132.30 6 x 6 10016 $156.45 PAGE: 4 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

All bell fittings can be manufactured without lugs, therefore clamps can be used. For a listing of clamps available, please refer to page 8 of this pricelist. FLANGE TO BELL SIZE CODE LIST PRICE 2½ x 3 9959 $107.10 3 x 3 9965 $117.60 4 x 3 9969 $126.00 3 x 4 9968 $129.15 4 x 4 9963 $129.15 5 x 4 9967 $136.50 5 x 5 10019 $141.75 6 x 4 9966 $141.75 6 x 6 10017 $157.50 6 x 8 10020 $178.50 8 x 8 10021 $183.75 MAINLINE ADAPTOR SIZE CODE LIST PRICE 3 x 3 9970 $107.65 3 x 4 9971 $116.55 3 x 5 10011 $127.60 4 x 4 9972 $122.35 4 x 5 9976 $131.25 4 x 6 10032 $141.75 5 x 5 10022 $143.85 FLANGE TO BELL NO LUGS \ LINKS SIZE CODE LIST PRICE 3 x 3 9965HA $78.00 4 x 4 9963HA $99.00 5 x 5 10019HA $132.00 6 x 6 10017HA $155.00 8 x 8 10021HA $180.00 FLANGE TO MALE WELD BELL SIZE CODE LIST PRICE 3 x 3 9965MSA $139.00 4 x 4 9963MSA $142.00 5 x 5 10019MSA $182.00 6 x 6 10017MSA $200.00 8 x 8 10021MSA $295.00 PAGE: 5 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

We can supply our range of weld bells to you in either black or galvanized. they used for? What are Used with lay flat hose ends Ring Type Coupler style Without side lug Links can be used with Travis clamps for hydrant tops Pivot and lateral connectors. WELD BELLS C/W LUGS AND LINKS (UNGALVANIZED) SIZE (mm) CODE LIST PRICE 3 80 9922 $63.00 4 100 9923 $68.25 5 125 9294 $70.35 6 150 9295 $72.45 8 200 9315 $77.70 WELD BELLS C/W LUGS AND LINKS (GALVANIZED) SIZE (mm) CODE LIST PRICE 3 80 9920 $67.20 4 100 9921 $74.55 5 125 9290 $76.65 6 150 9291 $77.70 8 200 9313 $85.05 *Note: All Weld Bells supplied with round-back gaskets PAGE: 6 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

We can supply our range of weld bells to you in either black or galvanized. What are they used for? Used with lay flat hose ends Ring Type Coupler style Without side lug Links can be used with Travis clamps for hydrant tops Pivot and lateral connectors. WELD BELL ONLY (UNGALVANIZED) SIZE (mm) CODE LIST PRICE 3 80 9297 $58.80 4 100 9298 $71.40 5 125 9299 $84.00 6 150 9300 $98.70 8 200 9317 $127.05 THREAD TO WELD BELL WITH LUGS & LINKS (GALVANIZED) SIZE (mm) CODE LIST PRICE 4 x 4 100 x 100 10026 $131.25 5 x 5 125 x 125 10027 $145.95 4 x 5 100 x 125 10028 $137.55 *Note: All Weld Bells supplied with round-back gaskets PAGE: 7 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

When ordering Weld Bell Clamps, be sure you double check what the size of your customer s Weld Bell is it needs to be the same size. Our range of Weld Bells are supplied standard with Round Back Gaskets if you happen to need spares or replacements at any stage, they are readily available. WELD BELL CLAMPS SIZE (mm) CODE LIST PRICE 4 100 9304 $26.25 5 125 9305 $31.50 6 150 9306 $31.50 8 200 9321 $42.00 ROUND BACK GASKETS SIZE (mm) CODE LIST PRICE 3 80 9924 $10.00 4 100 9925 $14.70 5 125 9310 $16.80 6 150 9312 $17.85 8 200 9319 $23.10 PAGE: 8 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Bauer is a known and trusted brand. They have been a part of the irrigation industry internationally for decades. Their products are tried and tested. We offer a range of Bauer couplings, seals and plugs suitable for an array of irrigation requirements. Please note: these items are not kept in stock. Please contact our Sales Department prior to purchasing for current lead times. SIZE FEMALE COUPLING MALE COUPLING RUBBER SEAL inches mm A B C D E F 2 50 48.5 72 50 48.5 62 80.6 3 76 76 98 81 76 88.5 114.5 3.5 89 89 121 93 89 108 134 4 108 108 147 112 108 132 162 5 133 132 163 137 132 152 188 6 159 158 182 155 158 170 208 8 194 194 231 200 194 220 258 BLACK STEEL COUPLING COMPLETE WITH RUBBER SEAL SIZE (mm) CODE LIST PRICE 2 50 12000 $29.00 3 76 12002 $41.00 3.5 89 12004 $60.00 4 108 12006 $70.00 5 133 12008 $99.00 6 159 12010 $128.00 8 194 12012 $232.00 BLACK STEEL MALE COUPLING SIZE (mm) CODE LIST PRICE 2 50 12014 $5.50 3 76 12016 $6.00 3.5 89 12018 $10.00 4 108 12020 $13.00 5 133 12022 $16.00 6 159 12024 $20.00 8 194 12026 $39.00 PAGE: 9 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Bauer Fittings are so versatile; they can even be used on a range of special build fittings such as flanged bends, strainers and hydrant outlets. Contact our Sales Department to find out how Bauer can work for you. GALVANIZED STEEL LEVER RING SIZE (mm) CODE LIST PRICE 2 50 12028 $21.00 3 76 12030 $33.00 3.5 89 12032 $44.00 4 108 12034 $55.00 5 133 12036 $86.00 6 159 12038 $112.00 8 194 12040 $173.00 BLACK STEEL FEMALE COUPLING WITH RUBBER SEAL SIZE (mm) CODE LIST PRICE 2 50 12042 $11.50 3 76 12044 $17.50 3.5 89 12046 $24.50 4 108 12048 $34.00 5 133 12050 $55.00 6 159 12052 $69.50 8 194 12054 $143.00 PAGE: 10 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Bauer Fittings are so versatile; they can even be used on a range of special build fittings such as flanged bends, strainers and hydrant outlets. Contact our Sales Department to find out how Bauer can work for you. RUBBER O RING SEAL SIZE (mm) CODE LIST PRICE 2 50 12056 $3.00 3 76 12058 $4.00 3.5 89 12060 $5.00 4 108 12062 $5.00 5 133 12064 $9.00 6 159 12066 $11.00 8 194 12068 $15.00 GALVANIZED STEEL MALE END PLUG WITH LEVER RING SIZE (mm) CODE LIST PRICE 2 50 12084 $72.50 3 76 12086 $106.50 3.5 89 12088 $155.50 4 108 12090 $174.00 5 133 12092 $233.00 6 159 12094 $299.00 8 194 12096 $594.00 PAGE: 11 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Bauer Fittings are so versatile; they can even be used on a range of special build fittings such as flanged bends, strainers and hydrant outlets. Contact our Sales Department to find out how Bauer can work for you. GALVANIZED STEEL FEMALE COUPLING WITH HOSE TAIL & RUBBER SEAL SIZE (mm) CODE LIST PRICE 2 50 x 50 12098 $16.00 3 76 x 76 12102 $23.00 3.5 89 x 76 12104 $30.00 4 108 x 100 12108 $39.00 5 133 x 125 12112 $54.00 6 159 x 150 12114 $68.00 8 194 x 200 12118 $134.00 GALVANIZED STEEL MALE COUPLING WITH HOSE TAIL & LEVER RING SIZE (mm) CODE LIST PRICE 2 50 x 50 12120 $35.00 3 76 x 76 12124 $52.00 3.5 89 x 89 12128 $68.00 4 108 x 108 12132 $87.00 5 133 x 125 12134 $116.00 6 159 x 159 12138 $165.00 8 194 x 200 12140 $284.00 PAGE: 12 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Bauer Fittings are so versatile; they can even be used on a range of special build fittings such as flanged bends, strainers and hydrant outlets. Contact our Sales Department to find out how Bauer can work for you. GALVANIZED STEEL FEMALE COUPLING THREADED BSPM WITH RUBBER SEAL SIZE (mm) CODE LIST PRICE 50 mm x 2 12144 $34.00 76 mm x 3 12148 $42.00 89 mm x 3 12150 $49.00 108 mm x 4 12152 $72.00 133 mm x 5 12154 $120.00 159 mm x 6 12156 $166.00 194 mm x 8 12158 P.O.A GALVANIZED STEEL FEMALE END PLUG WITH RUBBER SEAL SIZE (mm) CODE LIST PRICE 2 50 12070 $39.00 3 76 12072 $41.00 3.5 89 12074 $46.00 4 108 12076 $49.00 5 133 12078 $57.00 6 159 12080 $65.00 8 194 12082 $91.00 PAGE: 13 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Flanged Bauer fittings are especially popular for a quick and easy connection point where angles can differ and a non drip joint is needed. Remember when installing, a male coupling needs to be with female coupling. GALVANIZED STEEL FLANGED FEMALE COUPLING WITH RUBBER SEAL SIZE (mm) CODE LIST PRICE 2 50 x 50 12180 $133.00 3 80 x 89 12182 $178.00 4 100 x 108 12184 $213.00 5 125 x 133 12186 $262.00 6 150 x 159 12188 $321.00 8 200 x 194 12190 $499.00 GALVANIZED STEEL FLANGED MALE COUPLING WITH LEVER RING SIZE (mm) CODE LIST PRICE 2 50 x 50 12194 $139.00 3 80 x 89 12196 $160.00 4 100 x 108 12198 $215.00 5 125 x 133 12200 $253.00 6 150 x 159 12202 $341.00 8 200 x 194 12204 $433.00 GALVANIZED STEEL MALE COUPLING THREADED BSPM WITH LEVER RING SIZE CODE LIST PRICE 50 mm x 2 12162 $50.00 76 mm x 3 12166 $77.00 89 mm x 3 12168 $93.00 108 mm x 4 12170 $143.00 133 mm x 5 12172 $209.00 159 mm x 6 12174 $307.00 194 mm x 8 12176 P.O.A PAGE: 14 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

A high performance flexible layflat irrigation hose - The Professionals choice Long Service Life Designed for long service life on a wide variety of ground conditions with minimal maintenance. Tough and durable rubber cover with exceptional resistance to abrasion and cutting. No other hose manufacturer can offer such a complete package of outstanding performance, long life, customer service and an industry-leading warranty. ANGUS DRAGMASTER HOSE - 2 SIZE HOSE SIZE CODE LIST PRICE 51mm I.D 2 x 100m 25021A $1695.75 2 x 200m 25022A $3391.50 ANGUS DRAGMASTER HOSE - 2½ SIZE HOSE SIZE CODE LIST PRICE 64mm I.D 2½ x 100m 25026A $2018.10 2½ x 150m 25027A $3027.15 2½ x 200m 25028A $4036.20 ANGUS DRAGMASTER HOSE - 3 SIZE HOSE SIZE CODE LIST PRICE 76mm I.D 3 x 150m 25031A $4646.25 3 x 200m 25032A $6195.00 ANGUS DRAGMASTER HOSE - 3½ SIZE HOSE SIZE CODE LIST PRICE 90mm I.D 3½ x 150m 25036A $5286.75 3½ x 200m 25037A $7048.05 ANGUS DRAGMASTER HOSE 4 SIZE HOSE SIZE CODE LIST PRICE 102mm I.D 4 x 200m 25042A $8662.50 4 x 250m 25044A $11910.95 4 x 300m 25041A $14293.15 ANGUS DRAGMASTER HOSE - 4½ SIZE HOSE SIZE CODE LIST PRICE 114mm I.D 4½ x 200m 25047A $11445.00 4½ x 300m 25053A $18884.25 ANGUS DRAGMASTER HOSE 5 SIZE HOSE SIZE CODE LIST PRICE 127mm I.D 5 x 200m 25090A $13461.00 ANGUS DRAGMASTER HOSE 6 SIZE HOSE SIZE CODE LIST PRICE 152mm I.D 6 x 200m 25091A $16065.00 * Please note, irrigation fittings not included in price of hose. PAGE: 15 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Easy to Store & Transport Lightweight, compact and excellent coilability for economical storage. More flexible than plastic hoses for smoother coiling and easier handling. Nominal Technical Specification Diameter Inch mm 2 51 2½ 63.5 Minimum Tensile Strength (kg) 2800 3100 4500 5400 7800 9900 11300 16500 Minimum Short Length Burst Pressure (bar) 36 36 36 35 35 30 30 27.5 Maximum Working pressure* (bar) 18.0 18.0 18.0 17.5 17.5 15.0 15.0 13.5 Flat Width (mm) 84 104 127 147 168 188 208 249 Wall Thickness (mm) 2.3 2.3 3.1 3.4 3.7 3.8 4.1 4.1 Standard Continuous Length** (mm) 200 200 200 200 200 200 200 200 Weight*** (kg/m) 0.46 0.53 0.97 1.14 1.44 1.66 1.98 2.30 3 76 3½ 90 4 102 Temperature Range ( C) -20 to +70 4½ 114 5 127 6 152 PAGE: 16 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Our range of Extension Pipes are the ideal way to adjust the flange pattern of your installation to your requirements. Enabling you to successfully connect your Big Gun to your irrigator or permanent installation. BIG GUN 4 HOLE SMART FLANGE SIZE (mm) CODE LIST PRICE 3 OD x 4mm Wall 100mm 25507 $81.90 560mm 25509 $100.80 750mm 25510 $109.20 1000mm 25511 $121.80 BIG GUN 4 HOLE SMART FLANGE SIZE (mm) CODE LIST PRICE 3.5 OD x 4mm Wall 100mm 25503 $85.05 560mm 25546 $117.60 750mm 25514 $131.25 1000mm 25515 $150.15 BIG GUN 6 HOLE SMART FLANGE SIZE (mm) CODE LIST PRICE 3.5 OD x 4mm Wall 100mm 25582 $102.90 560mm 25584 $136.50 750mm 25586 $150.15 1000mm 25588 $168.00 BIG GUN 6 HOLE SMART FLANGE SIZE (mm) CODE LIST PRICE 4 OD x 4mm Wall 100mm 25590 $105.00 560mm 25592 $153.30 750mm 25594 $173.25 1000mm 25596 $198.45 PAGE: 17 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Our range of Extension Pipes are the ideal way to adjust the flange pattern of your installation to your requirements. Enabling you to successfully connect your Big Gun to your irrigator or permanent installation. BIG GUN 4 HOLE X 6 HOLE SMART FLANGE SIZE (mm) CODE LIST PRICE 3 OD x 4mm Wall 100mm 25517 $91.35 560mm 25518 $111.30 750mm 25520 $118.65 1000mm 25522 $129.15 BIG GUN 4 HOLE X 6 HOLE SMART FLANGE SIZE (mm) CODE LIST PRICE 3.5 OD x 4mm Wall 100mm 25545 $93.45 560mm 25526 $127.05 750mm 25527 $140.70 1000mm 25528 $159.60 NELSON FLANGE SIZE (mm) CODE LIST PRICE SR100 100mm 25550 $74.55 560mm 25532 $93.45 750mm 25533 $101.85 1000mm 25534 $112.35 NELSON FLANGE SR150 / 200 SIZE (mm) CODE LIST PRICE 4.5 OD x 4mm Wall 100mm 25537 $90.30 560mm 25539 $118.65 750mm 25541 $128.10 1000mm 25543 $152.25 PAGE: 18 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Nelson supplies to us a wide range of Big Gun Adaptors. Not sure which one best suits your needs? Why not contact our Sales Department for assistance. BIG GUN ADAPTORS - FLANGE TO THREAD (MI) SIZE CODE LIST PRICE 4H Big Gun Multi Flange to 2.5 BSPM 25552 $97.65 4H Big Gun Multi Flange to 3 BSPM 25554 $105.00 6H Big Gun Multi Flange to 2.5 BSPM 25556 $97.65 6H Big Gun Multi Flange to 3 BSMP 25558 $105.00 BIG GUN FLANGES (BLACK WELD ON) SIZE ID SIZE CODE PRICE Nelson SR100 2½ 25512 $32.55 Nelson SR100 3 25516 $32.55 Nelson SR150 3 25500 $32.55 Nelson SR150 3½ 25504F $34.65 Nelson SR200 4 25508 $33.50 Nelson SR200 4½ 25508F $34.65 4H Big Gun Multi Flange 3 25576 $42.00 4H Big Gun Multi Flange 3½ 25502 $42.00 6H Big Gun Multi Flange 3½ 25578 $28.35 6H Big Gun Multi Flange 4 25580 $50.40 BIG GUN ADAPTORS - FLANGE TO THREAD (FI) SIZE CODE LIST PRICE SR100 Flange to 2 BSPF 25523 $97.65 SR100 Flange to 2.5 BSPF 25524 $105.00 4H Big Gun Multi Flange to 3 BSPF 25568 $112.35 6H Big Gun Multi Flange to 2.5 BSPF 76162 $84.00 6H Big Gun Multi Flange to 3 BSPF 76164 $67.20 6H Big Gun Multi Flange to 4 BSPF 25574 $123.90 PAGE: 19 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

At Rodney Industries we offer two different brands of Sprinklers and Guns, Nelson and SIME. Listed below are the equivalents for each product. For performance charts or further details on any of the sprinklers \ guns listed below, please contact our Sales Department on 07 3624 0300 or via email sales@rodneyind.com.au. SIME IMPACT K1 Ambo Hidra Duplex Sinkro Ranger Quasar (Vari-angle) Konkord (Vari-angle) Explorer Kronos (Vari-angle) Nelson P65 P85 SR75 SR100 SR150 SR200 SIME GEAR DRIVE Luxor Skipper Big River Mariner Mariner (2-speed) Gemini (2-speed) PAGE: 20 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

For quality manufactured sprinklers why not choose a Nelson Impact Sprinkler. For performance details on the following sprinklers, please contact our Sales Department. NELSON F70V DESCRIPTION CODE LIST PRICE Sprinkler Nelson F70V (Less Nozzles) 19026 $222.30 NELSON F80V DESCRIPTION CODE LIST PRICE Sprinkler Nelson F80V (Less Nozzles) 18994 $480.00 NELSON 65P (PART CIRCLE) DESCRIPTION CODE LIST PRICE Sprinkler Nelson P65 (Less Nozzles) 18914 $300.00 NELSON 85P DESCRIPTION CODE LIST PRICE Sprinkler Nelson P85 (Less Nozzles) 18783 $401.60 PAGE: 21 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

In the field of large-volume sprinklers, Nelson Big Guns are recognized the world over as the leader in quality and performance. They are engineered and precision manufactured for heavy-duty reliability and long wear life with minimum maintenance required. Every Nelson Big Gun is subjected to the toughest inspection testing and quality control standards in the industry. 75 SERIES SPECIFICATIONS: 35 GPM-190 GPM, 7 M3/H-38 M3/H DESCRIPTION CODE LIST PRICE Part Circle Slow Reverse Big Gun (without Nozzle) SR75 $1420.00 Individual Taper Ring Nozzle Specify Size, Choice of 9 (10.2mm to 20.3mm) 75TR P.O.A 100 SERIES SPECIFICATIONS: 50 GPM-300 GPM, 10 M3/H-70 M3/H DESCRIPTION CODE LIST PRICE Part Circle Slow Reverse Big Gun (without Nozzle) SR100 $1691.00 Part Circle Slow Reverse Adjustable Trajectory (without Nozzle) SRA100 $2446.50 Taper Bore Nozzle Specify Size (choice of 10) 100T P.O.A Ring Nozzle Set Cap, Body & 7 Rings 100R $160.00 Secondary Nozzle Kit Suit 100 & 150 Series 19724 $39.00 PAGE: 22 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

In the field of large-volume sprinklers, Nelson Big Guns are recognized the world over as the leader in quality and performance. They are engineered and precision manufactured for heavy-duty reliability and long wear life with minimum maintenance required. Every Nelson Big Gun is subjected to the toughest inspection testing and quality control standards in the industry. 150 SERIES SPECIFICATIONS: 100 GPM-550 GPM, 23 M3/H-129 M3/H DESCRIPTION CODE LIST PRICE Part Circle Slow Reverse Flange or ANSI Flange (without Nozzle) SR150 $2723.00 Part Circle Slow Reverse Adjustable Trajectory (without Nozzle) SRA150 $3411.00 Part Circle Slow Reverse Flanged Connection Stainless Steel SR150SS $7533.00 (Includes Nozzle) Taper Bore Nozzle Specify Size 150T P.O.A Ring Nozzle Set Cap, Body & 7 Rings 150R $259.00 200 SERIES SPECIFICATIONS: 250 GPM-1000 GPM, 55 M3/H-270 M3/H DESCRIPTION CODE LIST PRICE Full Circle Flange (without Nozzle) F200 $3163.00 Part Circle Slow Reverse Flanged Connection (without Nozzle) SR200 $4572.00 Taper Bore Nozzle Specify Size 200T P.O.A Ring Nozzle Set & 7 Rings 200R $344.00 PAGE: 23 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Sime offer a range of small and medium capacity sprinklers for full or part circle operation, equipped with an adjustable jet-breaker which allow a good rainfall all over the wetted area. They are suitable for irrigating mixed crops, orchards, fruits, gardens, playgrounds and frost protection. Detailed specifications of the guns listed below are available from our office. K1 8 Full Circle K1 8 Part Circle K1 24 Part Circle Ambo Part Circle Hidra Part Circle Duplex Part Circle MOUNTING NOZZLE SIZE & RANGE FLOW SIZE THREADED OR CODE PRICE LPM FLANGED PRIMARY SECONDARY RADIUS-METS K1 8 Full Circle 32mm BSPF 8-12mm 12-26 49-224 140005 $150.00 K1 8 Part Circle 32mm BSPF 8-12mm 12-26 49-224 140008 $180.00 K1 24 Part Circle 32mm BSPF 8-12mm 12-26 49-224 140010 $180.00 Ambo Part Circle 40mm BSPF 8-16mm 6mm 16-29 76-406 140012 $200.00 Hidra Part Circle 40mm BSPF 12-18mm 5mm 20-36 152-533 140020 $275.00 Duplex Part Circle 50mm BSPF 12-20mm 8mm 20-43 159-657 140030 $450.00 PAGE: 24 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Sprinklers of middle or high capacity and pressure rotating at full circle or parts circle, with slow return. Particularly suitable for all types of watering machines can be used also for center pivots and normal installations. An intermittent and adjustable jet-breaker working only on the return, allows the user to get a uniform distribution of rain fall all over the irrigated area. Detailed specifications of the guns listed below are available from our office. Synkro Big Gun 25 Ranger Big Gun 25 Skipper Explorer Master Mariner 25 Mariner 25 2 speed Gemini 25 2 speed SIZE MOUNTING THREADED OR FLANGED PRIMARY NOZZLE SIZE & RANGE SECONDARY RADIUS- METS FLOW LPM CODE Synkro Big Gun 25 63mm BSPF 14-22mm 23-48 150-741 140035 $1000.00 Ranger Big Gun 25 80mm BSPF 24-34mm 33-64 509-1913 140050 $1352.40 Explorer Big Gun 25 Flanged 30-40mm 48-78 974-2834 140055 $1960.00 Skipper 40mm BSPF 12-20mm 5mm 22-41 159-617 140065 $560.00 Master 140075 $1450.00 Mariner 25 63mm BSP F.I 26-34mm 42-67 800-2162 140080 $1450.00 Mariner 25 2 speed 63mm BSP F.I 26-34mm 42-67 800-2162 140085 $1900.00 Gemini 25 2 speed Flanged 32-40mm 56-78 1602-3233 140090 $3000.00 PRICE PAGE: 25 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

They may be the smallest of our irrigator range, but the RI 10, RI 20 and RI 30 have the features to prove they are the best small irrigator on the market. If reliability and performance is what you are after, why not consider the RI Range. RI 10 RI 20 RI 30 Features: Australian designed and manufactured Positive drive via winch cable & anchor Power to handle all conditions Hot dip galvanized Self propelled Auto stop Heavy duty design Integral hose reel (RI-20/30) Adjustable speed Easy to operate Spare parts and backup service available Applications: Turf Watering Playing fields, parks, gardens, lawn cemeteries, golf courses, race courses. Agriculture Small crops, nurseries, turf farms. Dust Control Mining and building sites. PAGE: 26 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

The RI 10 is the perfect solution for your small scale irrigation needs such as parks, gardens, nurseries etc. Sprinkler: Hose: Flow Rate: Operating Pressure Range: Travel Distance Per Run: Wetted Width: Driving Mechanism: Construction: Nelson F70V Sprinkler 55 metres x 25mm (1 inch) 0.69 to 1.37 litres per second 245 to 345 kpa 110 metres 34 to 40 metres Water-jet powered rotary driving arms acting through high quality worm reduction drive to cable winch. Heavy duty welded steel chassis all hot dip galvanized. SIZE CODE PRICE BASIC Basic Irrigator (without Hose Kit & Sprinkler) RI010 $2717.00 COMPLETE 1 x 55m Hose Kit (with hose connections) Nelson F70 Sprinkler with 6mm Nozzle 2 x 1/8 Jets for drive arms RI010K $3147.00 NOZZLES 5.5mm Nozzle 7RN732 $5.57 6.3mm Nozzle 7RN14 $5.57 7.1mm Nozzle 7RN932 $5.57 7.5mm Nozzle 7RN1964 $5.57 PAGE: 27 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

With an increase in wetted width and operating pressure, the RI 20 can handle irrigating small crops with ease and minimal effort from the user. Sprinkler: Hose: Flow Rate: Operating Pressure Range: Travel Distance Per Run: Wetted Width: Driving Mechanism: Construction: Option: Nelson F80V Sprinkler 67 metres x 40mm (1 ½ inch) 1.73 to 7.12 litres per second 345 to 483 kpa 130 metres 51 to 69 metres Water-jet powered rotary driving arms acting through high quality worm reduction drive to cable winch. Heavy duty welded steel chassis all hot dip galvanized. Choice of skid or front wheels. SIZE CODE PRICE WHEELS BASIC Basic Irrigator (without Hose Kit & Sprinkler) RI020W $3468.00 WHEELS COMPLETE 1 1/2 x 67m Hose Kit (with hose connections) Nelson F80 Full Circle Sprinkler with 9.0mm Main Nozzle 2 x 1/8 Jets for drive Arms RI020KW $4185.00 SKIDS BASIC Basic Irrigator (without Hose Kit & Sprinkler) RI020S $3225.00 SKIDS COMPLETE 1 1/2 x 67m Hose Kit (with hose connections) Nelson F80 Full Circle Sprinkler with 9.0mm Main Nozzle 2 x 1/8 Jets for drive Arms RI020KS $3941.00 NOZZLES 6.5mm Drive Nozzle XSP188A $4.05 9.5mm Nozzle 8DRN38 $31.85 11.1mm Nozzle 8DRN716 $30.31 11.9mm Nozzle 8DRN1532 $30.31 12.7mm Nozzle 8DRN12 $30.31 14.3mm Nozzle 8DRN916 $30.31 15.1mm Nozzle 8DRN1932 $30.31 PAGE: 28 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Need a solution to dust suppression in mines, building and construction sites? Our RI 30 is your answer. Sprinkler: Hose: Flow Rate: Operating Pressure Range: Travel Distance Per Run: Wetted Width: Driving Mechanism: Construction: Hose Reel: Nelson P85 Sprinkler 100 metres x 50mm (2 inch) Angus Hi-Flow 1.7 to 7.3 litres per second 413 to 551 kpa 200 metres 46 to 70 metres Powerful piston type water motor with lever action drive to large diameter cable winch. Heavy duty welded steel chassis all hot dip galvanized. Vertical type for easy layout and rewind. SIZE CODE PRICE BASIC Basic Irrigator With Hose Reel (without Hose Kit & Sprinkler) RI030B $6998.00 COMPLETE With Hose Reel 100m x 2 Angus Hi-Flow Irrigator Hose Set of 2 x 1 Hose connections Nelson P85 Part Circle Knocker Sprinkler with Plug 11/32 Nozzle and Stream Straightening Vane RI030X $9237.00 NOZZLES 9.5mm Nozzle (3/8 ) 8DRN38 $31.85 10.3mm Nozzle (13/32 ) 8DRN1332 $30.31 11.1mm Nozzle (7/16 ) 8DRN716 $30.31 11.9mm Nozzle (15/32 ) 8DRN1532 $30.31 12.7mm Nozzle (1/2 ) 8DRN12 $30.31 13.5mm Nozzle (17/32 ) 8DRN1732 $30.31 14.3mm Nozzle (9/16 ) 8DRN916 $30.31 15.1mm Nozzle (19/32 ) 8DRN1932 $30.31 15.9mm Nozzle (5/8 ) 8DRN58 $30.31 17.5mm Nozzle (11/16 ) 8DRN1116 $30.31 PAGE: 29 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

There are three models within our range of Water Winch Travelling Irrigators; RI250P, RI300P and RI350P. They are the ideal machine for irrigating sporting fields right through to medium scale crops. They are also great for dust suppression at mine and building sites. Flows of the machines range from 5.15lps to 34.42lps. Operating pressures range from 413kPa to 620kPa. Features: There are many features that allow our Water Winch Travelling Irrigators to stand out from the competitors, here are just a few: Applications: Australian designed and manufactured Piston type water motor Positive drive via winch Cable and anchor Hot dip galvanized Self propelled Safe and easy operation Auto stop Heavy duty design P.T.O hose reel Adjustable speed Spare parts and backup service available Turf Watering Playing fields parks, gardens, lawn cemeteries, golf courses, race courses. Agriculture Small crops, nurseries, turf farms. Dust Control Mining and building sites. Fully welded design hose reel Combined PTO drives Hose reel PAGE: 30 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Are you on a mine or building site? Need to control the dust? For a cost effective solution, try our Water Winch a heavy duty machine yet easy to handle. You won t be disappointed. Sprinkler: Nelson SR100 21 Hose: 2.5 to 3 Dragmaster Hose Flow Rate: 5.15 to 12.51litres per second Operating Pressure Range: 413 to 482 kpa Travel Distance Per Run: Up to 400 metres Wetted Width: 69 to 89 metres Driving Mechanism: Double acting cylinder water motor and drive mechanism for reliable services in the heaviest soil conditions. Construction: Heavy duty welded steel chassis all hot dip galvanized. Hose Reel: Fully welded, galvanized hose reel. SIZE CODE PRICE BASE IRRIGATOR With hose reel with 310 m x 6 mm wire rope No brakes No purge 175/75 x 14 Galvanized Steel rims & tyres PTO Shaft Galvanized Chassis Galvanized Reel 25009 $13944.00 OPTIONAL EXTRAS Purge kit(model M500 Vacuum Pump) 76099 $2401.35 Irrigator Brake Kit 76201 $430.50 Upgrade - Wire Rope 6mm x 410mtr PLUS $160.00 Nelson Big Gun SR100 Complete SR100K $1870.00 2.5 x 3 Hose Couplers 9990 $75.60 3 x 3 Hose Couplers 9991 $84.00 PAGE: 31 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

We understand that every irrigation project is different. With our range of Water Winch Travelling Irrigators, you can take our base model and add the options you need brake kit, purge kit etc. Sprinkler: Nelson SR100 21 \ Nelson SR150 21 Hose: 2.5 to 4 Dragmaster Hose Flow Rate: 10.38 to 24.03 litres per second Operating Pressure Range: 413 to 551 kpa Travel Distance Per Run: Up to 400 metres Wetted Width: 81 to 112 metres Driving Mechanism: Double acting cylinder water motor and drive mechanism for reliable services in the heaviest soil conditions. Construction: Heavy duty welded steel chassis all hot dip galvanized. Hose Reel: Fully welded, galvanized hose reel. SIZE CODE PRICE BASE IRRIGATOR With hose reel with 410 m x 6 mm wire rope No brakes No purge 175/75 x 14 Galvanized Steel rims & tyres PTO Shaft Galvanized Chassis 25010 $15541.05 OPTIONAL EXTRAS Purge kit (Model M500 Vacuum Pump) 76099 $2401.35 Irrigator brake kit 76201 $430.50 Nelson Big Gun SR100 Complete SR100K $1870.00 Nelson Big Gun SR150 Complete SR150K $3000.00 3x3 Hose Couplers 9991 $84.00 3.5 x 3 Hose Couplers 10002 $89.25 PAGE: 32 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

The type of terrain is a key factor in determining which irrigator to purchase. Some terrains require a machine to have the extra stability from wider tyres. Perhaps you need to reduce rutting in your crop? Or even soil compaction? An option we offer on our RI-350P Water Winch is floatation tyres (pictured). For more information, why not contact our Sales Department. Sprinkler: Nelson SR150 21 \ Nelson SR200 21 Hose: 2.5 to 4 Dragmaster Hose Flow Rate: 7.58 to 34.42 litres per second Operating Pressure Range: 482 to 620 kpa Travel Distance Per Run: Up to 400 metres Wetted Width: 80 to 132 metres Driving Mechanism: Double acting cylinder water motor and drive mechanism for reliable services in the heaviest soil conditions. Construction: Heavy duty welded steel chassis all hot dip galvanized. Hose Reel: Fully welded, galvanized hose reel. SIZE CODE PRICE BASE IRRIGATOR With hose reel with 410 m x 7 mm wire rope No brakes No purge 175/75 x 14 Galvanized Steel rims & tyres PTO Shaft Galvanized Chassis 25011 $16368.45 OPTIONAL EXTRAS Purge kit (Model M500 Vacuum Pump) 76099A $2436.75 Irrigator brake kit 76201 $430.50 Nelson Big Gun SR150 Complete SR150K $3000.00 Nelson Big Gun SR200 Complete SR200K $4940.00 4 x 4 Hose coupling with lock ring 9994 $234.15 3½ x 4 Hose coupling with lock ring 9997 $98.70 Floatation (Wide wheels) 225/65 X 15 P.O.A PAGE: 33 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

There are four models within our range of Turbo Winch Travelling Irrigators; RI300T, RI350T, RI400T and RI450T. They are the ideal machine for irrigating sporting fields right through to medium scale crops. The four wheel stance makes the Turbo Winch perfect for uneven terrain. Flows of the machines range from 12.43 lps to 53.99 lps. Operating pressures range from 482kPa to to 620kPa. Features: There are many features that allow our Turbo Winch Travelling Irrigators to stand out from the competitors, here are just a few: Australian designed and manufactured Radial inflow turbine Fully galvanized chassis Travel shut off mechanism Industrial type 4 speed gearbox Four wheel stance Safe and easy operation Robust construction Spare parts and backup service available Radial inflow turbine Applications: Turf Watering Playing fields parks, gardens, golf courses, race courses. Agriculture Small to medium crops, dairy farms, pastures, lucerne. Dust Control Mining, building and construction sites. Industrial type 4 speed gearbox Purge pump PAGE: 34 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

We understand that every irrigation project is different. With our range of Water Winch Travelling Irrigators, you can take our base model and add the options you need brake kit, purge kit etc. Sprinkler: Nelson SR150 21 - Nelson SR200 21 Hose: 2.5 to 4.5 Dragmaster Hose Flow Rate: 12.43 to 19.56 litres per second Operating Pressure Range: 482 to 620 kpa Travel Distance Per Run: Up to 400 metres Wetted Width: 92 to 110 metres Driving Mechanism: Exclusive Radial Inflow Turbine. Specifically designed for travelling irrigator requirements. Delivers high torque at low RPMs; especially efficient when under load. Construction: Robust construction. Easily attaches to towing vehicle no jack needed to support draw bar. Hose Reel: Fully welded, galvanized hose reel. SIZE CODE PRICE BASE IRRIGATOR With hose reel with 410 m x 6 mm wire rope No brakes M500 Purge 175/75 x 14 Galvanized Steel rims & tyres PTO Shaft Fully galvanized chassis 25005 $20900.00 OPTIONAL EXTRAS Irrigator brake kit 76203 $430.50 Nelson Big Gun SR150 Complete SR150K $3000.00 Nelson Big Gun SR200 Complete SR200K $4940.00 3 x 3 Hose coupling with lock ring 9991 $84.00 3½ x 4 Hose coupling with lock ring 9997 $98.70 Floatation (Wide wheels) 225/65 x 15 P.O.A PAGE: 35 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Our range of Turbo Winch Irrigators, as standard, come complete with an industrial type four speed gearbox. How does this benefit the end user? The speed of travel can easily be selected to suit the crop/terrain being irrigated. Sprinkler: Nelson SR150 21 - Nelson SR200 21 Hose: 2.5 to 4.5 Dragmaster Hose Flow Rate: 12.43 to 39.50 litres per second Operating Pressure Range: 482 to 620 kpa Travel Distance Per Run: Up to 400 metres Wetted Width: 92 to 136 metres Driving Mechanism: Exclusive Radial Inflow Turbine. Specifically designed for travelling irrigator requirements. Delivers high torque at low RPMs; especially efficient when under load. Construction: Robust construction. Easily attaches to towing vehicle no jack needed to support draw bar. Hose Reel: Fully welded, galvanized hose reel. SIZE CODE PRICE BASE IRRIGATOR With hose reel with 410 m x 7 mm wire rope No brakes M500 Purge Kit 175/75 x 14 Galvanized Steel rims & tyres PTO Shaft Fully galvanized chassis 25006 $24050.00 OPTIONAL EXTRAS Irrigator brake kit 76203 $430.50 Nelson Big Gun SR150 Complete SR150K $3000.00 Nelson Big Gun SR200 Complete SR200K $4940.00 4 x 4 Hose coupling with lock ring 9994 $234.15 3½ x 4 Hose coupling with lock ring 9997 $98.70 Floatation (Wide wheels) 225/65 x 15 P.O.A PAGE: 36 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

We are passionate about our Travelling Irrigators, and for this reason, we use and recommend Nelson Australia s Sprinklers and Angus Dragmaster Hose. If you would like further information on either of these products, please do not hesitate in contacting our Sales Department. Sprinkler: Nelson SR150 21 - Nelson SR200 21 Hose: 2.5 to 4.5 Dragmaster Hose Flow Rate: 12.43 to 39.50 litres per second Operating Pressure Range: 482 to 620 kpa Travel Distance Per Run: Up to 400 metres Wetted Width: 92 to 136 metres Driving Mechanism: Exclusive Radial Inflow Turbine. Specifically designed for travelling irrigator requirements. Delivers high torque at low RPMs; especially efficient when under load. Construction: Robust construction. Easily attaches to towing vehicle no jack needed to support draw bar. Hose Reel: Fully welded, galvanized hose reel. SIZE CODE PRICE BASE IRRIGATOR With hose reel with 410 m x 7 mm wire rope No brakes M500 Purge Kit 175/75 x 14 Galvanized Steel rims & tyres PTO Shaft Fully galvanized chassis 24998 $23999.00 OPTIONAL EXTRAS Irrigator brake kit 76203 $430.50 Nelson Big Gun SR150 Complete SR150K $3000.00 Nelson Big Gun SR200 Complete SR200K $4940.00 4 x 4 Hose coupling with lock ring 9994 $234.15 3½ x 4 Hose coupling with lock ring 9997 $98.70 Floatation (Wide wheels) 225/65 x 15 P.O.A PAGE: 37 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

The type of terrain is a key factor in determining which irrigator to purchase. Some terrains require a machine to have the extra stability from wider tyres. Perhaps you need to reduce rutting in your crop? Or even soil compaction? An option we offer on our RI-450P Turbo Winch is floatation tyres. For more information, why not contact our Sales Department. Sprinkler: Nelson SR150 21 - Nelson SR200 21 Hose: 3 to 4.5 Dragmaster Hose Flow Rate: 18.65 to 53.99 litres per second Operating Pressure Range: 482 to 620 kpa Travel Distance Per Run: Up to 400 metres Wetted Width: 104 to 148 metres Driving Mechanism: Exclusive Radial Inflow Turbine. Specifically designed for travelling irrigator requirements. Delivers high torque at low RPMs; especially efficient when under load. Construction: Robust construction. Easily attaches to towing vehicle no jack needed to support draw bar. Hose Reel: Fully welded, galvanized hose reel. SIZE CODE PRICE BASE IRRIGATOR With hose reel with 410 m x 8 mm wire rope No brakes M500 Purge 225/65 x 15 Galvanized Steel rims & tyres PTO Shaft Fully galvanized chassis 25007 $25049.85 OPTIONAL EXTRAS Heavy Duty mod. M3000 compressor PLUS $1110.00 Nelson Big Gun SR200 Complete SR200K $4940.00 Irrigator brake kit 76205 $436.80 4½ x 4 Hose coupling with lock ring 9995 $259.35 4 x 4 Hose coupling with lock ring 9994 $234.15 3½ x 4 Hose coupling with lock ring 9997 $98.70 Floatation tyres 11 x 16.5 P.O.A PAGE: 38 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

HT SERIES HOSE TRAILER Easy to operate An adjustable hose reel brake is fitted for better control on the hose layout operation The flat base is for maximum hose protection to maximise hose life Available in single or double The P.T.O is permanently fitted to allow hose retrieval to be carried out while in the towing position. High Clearance SIZE CODE LIST PRICE HT35/1 SINGLE HOSE REEL TRAILER No purge kit fitted 25135 $7974.75 To suit up to 3½ x 200m Hose 175 / 75 x 14 Galvanized steel rims & tyres HT45/1 SINGLE HOSE REEL TRAILER No purge kit fitted 24999 $8289.75 To suit up to 4½ x 200m Hose 225 / 65 x 15 Galvanized steel rims & tyres HT45/2 SINGLE REEL HOSE TRAILER No purge kit fitted To suit up to 4½ x 300m Hose 225/ 65 x 15 Galvanized steel rims & tyres HT45/3 DOUBLE REEL HOSE TRAILER No purge kit fitted To suit up to 4½ x 300m Hose - 1 x 100m & 1 x 200m hose combination 225/ 65 x 15 Galvanized steel rims & tyres 25000 $8289.75 25001 $9333.45 PAGE: 39 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

GROUND CLEARANCE HT SERIES HOSE TRAILER LENGTH WIDTH HEIGHT WEIGHT 400mm 3400mm 2000mm 1400mm 450mm Hose Sizes 2 up to 6 Maximum Hose Length Double reel 400 metres * Note: Weight and height will vary depending on model SIZE CODE PRICE HT45/4 DOUBLE REEL HOSE TRAILER No purge kit fitted 25002 $9670.50 To suit up to 4½ x 400m Hose - 2 x 200m hose combination 225/65 x 15 Galvanized steel rims & tyres HT45/5 SINGLE REEL HOSE TRAILER No purge kit fitted 25003 $10132.50 To suit 5 and 6 x 200m Hose - 1 x 200m hose combination 225/65 x 15 Galvanized steel rims & tyres HT45/6 DOUBLE REEL HOSE TRAILER No purge kit fitted 25004 $11130.00 To suit 5 and 6 x 400m Hose - 2 x 200m hose combination 225/65 x 15 Galvanized steel rims & tyres UPGRADE TO M500 Purge Pump 76905 $2625.00 Heavy Duty Compressor Model M3000 76903 $3360.00 PAGE: 40 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

The Rainspan Boom Irrigator Range has evolved into the most reliable, strongest, efficient and user friendly machine, whilst boasting the largest range of boom irrigator s on the Market. Features: There are many features that allow our Booms to stand out from the competitors, here are just a few: On Board Hose Reel Perma-coupled hose makes it easy to lay out hose and cable in the one operation. Gearbox for smooth safe operation specifically designed for Irrigator. New Generation Turbines that are the best in the industry. Reliable High volume Purge Pump. Boom lengths from 28m (38m wetted width) to 99m (119m wetted width). Runs up to 600m. Towers: 2.2m to 3.5m. Auto stop. Options: Each model has its own unique options but some of the standard options are: Speed controller computer. Controls speed through run Electronic Speed counter. Gives an accurate travel speed of Irrigator In Line Filter. Stops any large material that won t pass through the sprinklers Remote Slew from Irrigator. 1000 & 2000 slews boom from Irrigator Remote Slew from tractor. 350 & 550 slews boom from Tractor Water Supply Shutdown. Stops water flow to boom Pressure Sustaining Valve. Maintains pre set pressure to Irrigator Flow Control Valve. Maintains pre set flow to Irrigator Auto Boom Flush. First flush of boom Tower Extension. For higher crops Sprinkler Upgrades. Nutators, Spinners, Trash busters, I-Wob sprinklers available End Guns. For extra width or uneven fields and corners. Flexible Sprinkler Drops. To lower sprinklers. Turf Tyre Upgrade. Wider and smoother for no tracks. Brake kit. PAGE: 41 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Details on the field layout with a Rainspan Soft Hose Boom Irrigator Field layout for the irrigator will depend on boom width and field dimensions as shown by the example given below; Lanes are recommended to be kept straight level grassed mowed and free from trash; Width of run is at least 1m wider than machine width (see specifications); Hydrants are located halfway and to the side of each run (Take half the width of the machine shown in specifications for model and add 1.5m); Each dealer will determine how much over laps is needed to suit the crop requirements, field arrangement and wind conditions in their particular area. A standard 2m overlap is recommended. PAGE: 42 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

When asking irrigation dealers why they choose Rainspan Low Pressure Boom Irrigators, Superior quality of construction, simplicity of design and optimum efficiency are standard replies. SB 350 BASE IRRIGATOR CODE LIST PRICE Radial Flow Turbine Drive 3 Speed Gearbox 2.2m Tower 7mm Ø x 420m Wire Rope 4 Galvanized Hose Reel Purge Pump PTO Shaft 10.5 x 16.5 front & rear tyres 3 Wheel Chassis Flow range between 6,000 to 13,000 GPH @50PSI at the Machine. *Does not include Hose / Boom R350 $26827.50 SB 350 NO HOSE REEL Radial Flow Turbine Drive 3 Speed Gearbox 2.2m Tower 7mm Ø x 420m Wire Rope 10.5 x 16.5 front & rear tyres 3 Wheel Chassis Flow range between 6,000 to 13,000 GPH @50PSI at the Machine. *Does not include Hose / Boom R350NHR $20229.30 BOOM (H/D GALVANIZED) Includes Nelson R3000 Rotating Sprinklers on every (2nd)* Second outlet, or at ** every outlet to accommodate higher flow rates Each R3000 sprinkler includes a (galv) gooseneck and 300mm Dropper PAGE: 43 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Performance charts are available for our Soft Hose Boom range. Just call or email our office with the model\s you are after and one of our Sales Team members will be more than happy to send them through to you. Our sales email address is sales@rodneyind.com.au OPTIONS ADD In-line Filter $661.50 High Pressure Shutdown Valve $1344.00 Computer Speed Controller (150 Series) $3279.40 2 x end guns $352.80 HYD Slew $1853.25 Brake Kit $287.50 BOOM WIDTH NO. OF SPRINKLERS BOOM OPTIONS FLOW RATES CODE LIST PRICE 28 8* (7,860 gph/9.9 lps max flow @ 20psi) R35028 $7401.45 28 14** (13,755 gph/17.3 lps max flow @ 20psi) R35028A $7841.40 41 10* (9,825 gph/12.4 lps max flow @ 20psi) R35041 $9716.70 41 20** (19,650 gph/24.8 lps max flow @ 20psi) R35041A $10197.60 48 12* (11,790 gph/14.9 lps max flow @ 20psi) R35047 $12187.35 48 24** (23,580 gph/29.7 lps max flow @ 20psi) R35047A $12808.95 * MINIMUM SPRINKLER OUTLETS ARE SET AT 4.3M CENTRES, (IE. EVERY 2 ND OUTLET) ** MAXIMUM SPRINKLER OUTLETS ARE SET AT 2.15M CENTRES, (IE. EVERY OUTLET) PAGE: 44 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

We are passionate about our Soft Hose Booms, and for this reason, we use and recommend Nelson Australia s Sprinklers and Angus Dragmaster Hose. If you would like further information on either of these products, please do not hesitate in contacting our Sales Department. SB 550 BASE IRRIGATOR CODE LIST PRICE Radial Flow Turbine Drive 4 Speed Gearbox 2.2m Tower 9mm Ø x 420m Cable 4 Hose Reel Purge Pump PTO Shaft Brakes 14.9 x 24 front & rear (tractor) tyres. Flow range between 8,000 to 15,000 GPH @50PSI at the Machine R550 $39990.30 *Does not include Hose / Boom BOOM (H/D GALVANIZED) Includes Nelson R3000 Rotating Sprinklers on every (2nd)* Second outlet, or at ** every outlet to accommodate higher flow rates. Each R3000 sprinkler includes a (galv) gooseneck and 300mm Dropper. PAGE: 45 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Through research and development, including practical input from the farming community, Rodney Industries Rainspan Booms have evolved into an excellent product that gives owners years of trouble free service. OPTIONS ADD 2 Additional Bypass $346.50 Upgrade 10mm Ø 520m Wire Rope $702.45 In-line Filter $661.50 High Pressure Shutdown Valve $1417.50 Tyre Sizes and Patterns (other than standard rear 14.9 x 24 ) P.O.A Computer Speed Controller (150 Series) $3279.40 2 x end guns K1 8 $352.80 Hydraulic Slew $3465.00 BOOM WIDTH NO. OF SPRINKLERS FLOW RATES CODE LIST PRICE BOOM OPTIONS 54 14* (13,755 gph/17 lps max flow @ 20psi) R55054 $15838.20 54 26** (25,545 gph/32 lps max flow @ 20psi) R55054A $16884.55 67 18* (17,680 gph/22 lps max flow @ 20psi) R55067 $18064.20 67 32** (31,440 gph/39.5 lps max flow @ 20psi) R55067A $19219.20 74 20* (19,650 gph/25 lps max flow @ 20psi) R55074 $19209.75 74 36** (35,370 gph/44.5 lps max flow @ 20psi) R55074A $20513.85 * MINIMUM SPRINKLER OUTLETS ARE SET AT 4.3M CENTRES, (IE. EVERY 2 ND OUTLET) ** MAXIMUM SPRINKLER OUTLETS ARE SET AT 2.15M CENTRES, (IE. EVERY OUTLET) PAGE: 46 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Rainspan Boom Irrigators are designed to be cost effective. Thoughtful design, low maintenance costs, low water pressure, lower pumping costs, minimal evaporation and excellent uniformity add up to significant financial benefits to Rainspan owners. SB 1000 BASE UNIT CODE LIST PRICE Axial Flow Turbine Drive 2.2m Tower Speed Compensator 9mm Ø x 420m Cable 4 Hose Reel Purge Pump PTO Shaft Hydraulic Boom Slew 14.9 x 24 rear (tractor) tyres. Flow range between 10,000 to 35,000 GPH @35PSI at the turbine. R1000 $54987.45 *Does not include Hose / Boom SB 1000 NO HOSE REEL Axial Flow Turbine Drive 2.2m Tower Speed Compensator 9mm Ø x 420m Cable Hydraulic Boom Slew 14.9 x 24 rear (tractor) tyres. Flow range between 10,000 to 35,000 GPH @35PSI at the turbine. R1000NHR $47112.45 *Does not include Hose / Boom PAGE: 47 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Did you know that for an additional fee, a Rodney Industries representative can go out onsite to commission the machine? They will assist your crew in the installation of the Soft Hose Boom Irrigator as well as provide training to those in need. Ask for this service when you request your quote. SB 1000 DIESEL DRIVE CODE LIST PRICE Diesel Drive 2.2m Tower Speed Compensator 9mm Ø x 420m Cable 4 Hose Reel Purge Pump PTO Shaft Hydraulic Boom Slew 14.9 x 24 rear (tractor) tyres. Flow range between 10,000 to 35,000 GPH @35PSI at the turbine. R1000D $58280.25 *Does not include Hose / Boom BOOM (H/D GALVANIZED) Includes Nelson R3000 Rotating Sprinklers on every (2nd)* Second outlet, or at ** every outlet to accommodate higher flow rates Each R3000 sprinkler includes a (galv) gooseneck and 300mm Dropper. PAGE: 48 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Nelson s R3000 Rotator is the world s premier pivot sprinkler. It operates with a proven, patented drive principle and simplicity of design with only one moving part. You can expect the highest levels of reliability and long wear life under tough field conditions. Even distribution throughout full coverage area produces low instantaneous application rates. OPTIONS ADD Upgrade 10mm Ø 520m Wire Rope $702.45 Upgrade 10mm Ø 620m Wire Rope $973.90 In-line Filter $661.50 Remote Slew Adaptor on Irrigator $1533.00 High Pressure Shut Down Valve $1417.50 Computer Speed Controller (150 Series) $3279.40 Computer Speed Controller (300 Series) $3591.00 2 x end guns $352.80 BOOM WIDTH NO. OF SPRINKLERS BOOM OPTIONS FLOW RATES CODE PRICE 54 *14 (13,755 gph/17 lps max flow @ 20psi) R100054 $16138.50 54 **26 (25,545 gph/32 lps max flow @ 20psi) R100054A $17109.75 67 *18 (17,680 gph/22 lps max flow @ 20psi) R100067 $18064.20 67 **32 (31,440 gph/25 lps max flow @ 20psi) R100067A $19219.20 74 *20 (19,650 gph/25 lps max flow @ 20psi) R100074 $19209.75 74 **36 (35,370 gph/44 lps max flow @ 20psi) R100074A $20513.85 * MINIMUM SPRINKLER OUTLETS ARE SET AT 4.3M CENTRES, (IE. EVERY 2 ND OUTLET) ** MAXIMUM SPRINKLER OUTLETS ARE SET AT 2.15M CENTRES, (IE. EVERY OUTLET) PAGE: 49 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

All of our Soft Hose Boom Irrigators come complete with an instruction manual and boom assembly manual. In addition to the hard copy instructions, there are many instructional stickers located on the irrigator. It is imperative that all instruction manuals and stickers are read in full by the end user prior to operating the machine. SB 2000 STANDARD CODE LIST PRICE Axial Flow Turbine Drive 2.4m Tower Speed Compensator 9mm Ø x 420m Cable 4 Hose Reel Purge Pump PTO Shaft Hydraulic Boom Slew 16.9 x 28 rear tractor tyres. Flow range between 10,000 to 35,000 GPH @35PSI at the machine. R2000 $66748.50 *Does not include Hose/ Boom SB 2000 NO HOSE REEL Axial Flow Turbine Drive 2.4m Tower Speed Compensator 9mm Ø x 420m Cable Hydraulic Boom Slew 16.9 x 28 rear tractor tyres. Flow range between 10,000 to 35,000 GPH @35PSI at the machine. R2000NHR $55356.00 *Does not include Hose/ Boom PAGE: 50 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

In addition to the standard equipment on the previous model SB2000, this particular SB2000 comes complete with a Kubota Diesel Drive. The diesel drive boasts: Type Air/Oil cooled vertical diesel engine No. Cylinders 1 Combustion System Three Vortex combustion system Max Output continuous 6.2 h @ 3600 rpm Starting system Electric Start Fuel tank 3.6 ltrs SB 2000 DIESEL DRIVE CODE LIST PRICE Diesel Drive 2.4m Tower Speed Compensator 9mm Ø x 420m Cable 4 Hose Reel Purge Pump PTO Shaft Hydraulic Boom Slew 16.9 x 28 rear tractor tyres. Flow range between 10,000 to 35,000 GPH @35PSI at the machine. R2000D $70455.00 *Does not include Hose/ Boom BOOM (H/D GALVANIZED) Includes Nelson R3000 Rotating Sprinklers on every (2nd)* Second outlet, or at ** every outlet to accommodate higher flow rates Each R3000 sprinkler includes a (galv) gooseneck and 300mm Dropper. OPTIONS ADD 3.5m Tall Tower $1260.00 3.1 Mid Tower $787.50 Upgrade 10mm Ø 520m Wire Rope $702.45 Upgrade 10mm Ø 620m Wire Rope $973.90 In-line Filter $661.50 4.0 Double Hose Reel $1417.50 4.5 Hose Reel $262.50 4.5 Double Hose Reel $1680.00 Remote Slew Adaptor on Irrigator $1533.00 High Pressure Shut Down Valve $1417.50 Computer Speed Controller (150 Series) $3279.40 Computer Speed Controller (300 Series) $3591.00 2 x end guns $352.80 PAGE: 51 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Interested in this machine but you do not have an account with a freight company? Don t panic. We have several freight companies delivering around Australia. Our despatch team can provide a competitive quote for transporting the machine to you (or your customer direct) you just need to organise the unloading. DETAILS BOOM NO. OF WIDTH SPRINKLERS FLOW RATES CODE PRICE 67 *18 (17,680 gph/22 lps max flow @ 20psi) Non Standard R200067 $18064.20 67 **32 (31,440 gph/39.5 lps max flow @ 20psi) Non Standard R200067A $19219.20 74 *20 (19,650 gph/25 lps max flow @ 20psi) Non Standard R200074 $19209.75 74 **36 (35,370 gph/44.5 lps max flow @ 20psi) Non Standard R200074A $20513.85 80 *22 (21,600 gph/27 lps max flow @ 20psi) Fitted R200080 $21825.85 80 **40 (39,300 gph/49.5 lps max flow @ 20psi) Fitted R200080A $23221.80 87 *24 (23,580 gph/29.7 lps max flow @ 20psi) Fitted R200087 $22760.85 87 **44 (43,200 gph/54.5 lps max flow @ 20psi) Fitted R200087A $24289.65 93 *24 (23,580 gph/29.7 lps max flow @ 20psi) Fitted R200093 $25754.95 93 **44 (43,200 gph/54.5 lps max flow @ 20psi) Fitted R200093A $27306.30 100 *26 (25,550 gph/32 lps max flow @ 20psi) Fitted R200099 $26912.55 100 **48 (47,160 gph/59.1 lps max flow @ 20psi) Fitted R200099A $28618.80 PAGE: 52 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Marani has one of the largest specific ranges of poly reel irrigators available in all markets worldwide ranging from a 40mm to a 160mm machine. Every machine is complete with manuals, instruction stickers, spare parts lists and performance sheets to make the end user run the machine very easily by themselves. Features: There are many features that allow our Marani Hard Hose Irrigators to stand out from the competitors, here are just a few: Fully Galvanized Corrosion resistance Extra durability Fourth Generation Choke Flow Lower pressure loss over turbine More economical to run Gives a wider speed control range Direct coupled to gearbox PE Hose Manufactured to resist heavy drags Will work at high pressures Tachometer Retraction speed can be instantly read out Drum Supports Drums are supported by large water proof bearings giving an increase in drum life Hose Guide System Scroll Bar Guarantees a perfect layering of the PE hose Reduces hose wear to a minimum Gearbox 3, 4 & 6 Speed gearboxes Ease of speed changing PAGE: 53 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

There is something special about the Turbine on a Marani Hard Hose Irrigator. If you require more technical information then what is below, just contact our Sales Department on 07 3624 0300 or via email at sales@rodneyind.com.au Marani assembles and offers to their customers the fourth generation turbine system, providing excellent results even at very low pressures. The choke-flow turbine with built in bypass and flanged directly to a gearbox represents a significant advance in hose reel irrigators drive system and makes the system very reliable for a performance point of view. The turbine is made with a special aluminium alloy and machined using automatic machine tools. The current turbine-gearbox system has eliminated the transmission belt and the external bypasses. The turbine is connected directly to the gearbox and the bypass is internal. This keeps the pressure absorption to a minimum, allowing the machine to run more smoothly. PAGE: 54 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

The F010B is the smallest irrigator within the range of Marani Hard Hose Irrigators. It is the perfect solution for the irrigation needs of parks, gardens and sporting fields. Easy to use and easy to handle, the F010B is the ideal machine for the transition from Soft Hose to Hard Hose. Standard Equipment: Mechanical lifting device of trolley Mechanical feet Single Gear Multi Speed gearbox Water Inlet Shut-Off Valve Flexible connection pipe 2 x 6m Galvanized raingun trolley Pressure gauge (glycerine bath) Hot galvanized chassis and reel Winding handle Safety guards Turbine flanged on the gearbox with external bypass DESCRIPTION CODE LIST PRICE Marani F010B 40mm x 130m A F010B40130 $8081.00 SIME K1 24 Part Circle Gun 140010 $180.00 Nelson P65 Gun 18914K $300.00 Marani F010B 50mm x 170m E F010B50170 $10725.00 SIME Hydra Part Circle 140020 $275.00 Nelson P85 Gun 18783K $550.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** PAGE: 55 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

All of our Marani Hard Hose Irrigators come complete with an instruction manual and spare parts listing. In addition to the hard copy instructions, there are many instructional stickers located on the irrigator. It is imperative that all instruction manuals and stickers are read in full by the end user prior to operating the machine. Standard Equipment: Automatic lifting device of trolley P.T.O. Turbine flanged on the gearbox with external bypass Single gear multi speed gearbox Hose guide system Flexible connection pipe 2 x 6m Automatic lifting device of trolley Safety guards Pressure gauge (glycerine bath) Galvanized raingun trolley mounted on variable track wheels Hot Galvanized chassis, turret and reel Winding handle Water Inlet Shut-Off Valve DESCRIPTION CODE LIST PRICE Marani GT015B 58mm x 200m C GT015B58200 $16819.00 SIME Hidra Part Circle 140020 $275.00 Nelson P85 Gun 18783K $550.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** PAGE: 56 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Performance charts are available for the Marani Hard Hose Range. Just call or email our office with the model\s you are after and one of our Sales Team members will be more than happy to send them through to you. When requesting the charts, please also let the Sales Team know which sprinkler\gun you are interested in as this will change the performance data for the machine. Our sales email address is sales@rodneyind.com.au Standard Equipment: Mechanical lifting device trolley Telescopic mechanical feet Single speed gearbox Safety guards P.T.O. Turbine flanged on the gearbox with external by-pass Flexible connection pipe 2 x 6m Hot galvanized chassis and reel Winding handle Galvanized raingun trolley mounted on variable track wheels Mechanical lifting device trolley Pressure gauge (glycerine bath) DESCRIPTION CODE LIST PRICE Marani GT020B 63mm x 200m E GT020B63200 $19822.00 SIME Hidra Part Circle 140020 $275.00 Nelson P85 Gun 18783K $550.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** PAGE: 57 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

If you need information on which gun best suits your needs, please call or email our office and ask for a specification sheet. Our sales email address is sales@rodneyind.com.au Standard Equipment: Mechanical lifting device of trolley Telescopic mechanical feet 3 Speed gearbox PTO Mechanical lifting device of trolley Water Inlet Shut-Off Valve Turbine mounted on the gearbox with built-in bypass Flexible connection pipe 3 x 6m Pressure gauge (glycerine bath) Speed equalizer Hot galvanized chassis and reel Winding handle Safety guards Galvanized raingun trolley mounted on variable track pneumatic wheels DESCRIPTION CODE LIST PRICE Marani GT022B 63mm x 250m B GT022B63250 $23602.00 SIME Hidra Part Circle 140020 $275.00 Nelson P85 Gun 18783K $550.00 Marani GT022B 75mm x 250m D GT022B75250 $23396.00 SIME Synkro Big Gun 25 140035 $1000.00 Nelson SR100 Gun SR100K $1870.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** OPTIONS CODE PRICE Computer MA-RAIN 26 35462703 $1784.20 Computer MA-RAIN 36 35430912 $993.30 Solar Panel 35000150 $429.00 Tachometer 35462711 $295.90 PAGE: 58 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Is workplace safety a concern to your customer? Are they looking for a machine that is easy to operate as well as safe? With the inclusion of panels and guards on the Marani Hard Hose Irrigators, the risk of injury is considerably reduced. Standard Equipment: Mechanical lifting device of trolley Telescopic mechanical feet 3 Speed gearbox PTO Water Inlet Shut-Off Valve Turbine mounted on the gearbox with built-in bypass Flexible connection pipe 3 x 6m Pressure gauge (glycerine bath) Speed equalizer Hot galvanized chassis and reel Galvanized raingun trolley mounted on variable track pneumatic wheels Winding handle Safety guards DESCRIPTION CODE LIST PRICE Marani GT026B 75mm x 300m C GT026B75300 $27870.00 SIME Synkro Big Gun 25 140035 $1000.00 Nelson SR100 Gun SR100K $1870.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** OPTIONS CODE PRICE Computer MA-RAIN 26 35462703 $1784.20 Computer MA-RAIN 36 35430912 $993.30 Solar Panel 35000150 $429.00 Tachometer 35462711 $295.90 Hydraulic Rotation with Hydraulic Lift of Trolley and Hydraulic Lift of Drawbar with Tractor Jacks 80430300 $2824.00 PAGE: 59 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Interested in this machine but you do not have an account with a freight company? Don t panic. We have several freight companies delivering around Australia. Our despatch team can provide a competitive quote for transporting the machine to you (or your customer direct) you just need to organise the unloading. Standard Equipment: Mechanical lifting device of trolley Telescopic mechanical feet 3 Speed gearbox PTO Turbine mounted on the gearbox with built-in bypass Flexible connection pipe Hot galvanized chassis and reel Pressure gauge (glycerine bath) Speed equalizer Tachometer Galvanized raingun trolley mounted on variable track pneumatic wheels Water Inlet Shut-Off Valve Winding handle Safety guards DESCRIPTION CODE LIST PRICE Marani GT030B 75mm x 350m D GT030B75350 $31011.00 SIME Synkro Big Gun 25 140035 $1000.00 Nelson SR100 Gun SR100K $1870.00 Marani GT030B 90mm x 300m D GT030B90300 $31000.00 Marani GT030B 90mm x 350m B GT030B90350 $33000.00 SIME Ranger Big Gun 25 140050 $1352.40 Nelson SR150 Gun SR150K $3000.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** OPTIONS CODE PRICE Computer MA-RAIN 26 35462700 $1697.30 Computer MA-RAIN 36 35430912 $993.30 Solar Panel 35000150 $429.00 Hydraulic Rotation with Hydraulic Lift of Trolley and Hydraulic Lift of Drawbar with Tractor Jacks 80430300 $2824.00 PAGE: 60 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

When dealing with your customer, do not forget to mention that a crane is required to unload many of our irrigators, (from the GT040B up). For weights and dimensions of all machines, please refer to pages 76-78 or contact our Sales Department. Standard Equipment: Telescopic mechanical feet 6 Speed gearbox Hot galvanized chassis and reel Turbine mounted on the gearbox with built-in bypass PTO Flexible connection pipe Speed equalizer Hydraulic lifting device of trolley by hand Pressure gauge (glycerine bath) Tachometer Galvanized raingun trolley mounted on variable track pneumatic wheels Winding handle Safety guards Water Inlet Shut-Off Valve DESCRIPTION CODE LIST PRICE Marani GT040B 110mm x 250m B GT040B110250 $36960.00 SIME Ranger Big Gun 25 140050 $1352.40 Nelson SR150 Gun SR150K $3000.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** OPTIONS CODE PRICE Computer MA-RAIN 26 35462700 $1697.30 Computer MA-RAIN 36 35430912 $993.30 Solar Panel 35000150 $429.00 Hydraulic Rotation with Hydraulic Lift of Trolley and Hydraulic Lift of Drawbar with Tractor Jacks 80430300 $2824.00 PAGE: 61 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Do you require additional information on this machine? Would you like a copy of the manual or performance charts? For all additional information regarding this machine, or any from our range of Marani Hard Hose Irrigators, please do not hesitate in contacting our Sales Department. Standard Equipment: Telescopic mechanical feet 6 Speed gearbox Hot galvanized chassis and reel Turbine mounted on the gearbox with built-in bypass PTO Flexible connection pipe Safety guards Hydraulic lifting device of trolley by hand pump Pressure gauge (glycerine bath) Speed equalizer Tachometer Galvanized raingun trolley mounted on variable track pneumatic wheels Winding handle Water Inlet Shut-Off Valve DESCRIPTION CODE LIST PRICE Marani GT040C 110mm x 300m C GT040C110300 $40081.00 SIME Ranger Big Gun 25 140050 $1352.40 Nelson SR150 Gun SR150K $3000.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** OPTIONS CODE PRICE Computer MA-RAIN 26 35462700 $1697.30 Computer MA-RAIN 36 35430912 $993.30 Solar Panel 35000150 $429.00 Hydraulic Rotation with Hydraulic Lift of 80430300 $2824.00 Trolley and Hydraulic Lift of Drawbar with Tractor Jacks Emptying Compressor 75430550 $2728.00 PAGE: 62 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Is your customer looking for a Hard Hose Irrigator with boom? From page 79 of this pricelist you can find our range of Briggs Booms that are suitable for our Hard Hoses. Standard Equipment: Telescopic mechanical feet 4 Speed gearbox Hot galvanized chassis and reel Turbine mounted on the gearbox with built-in bypass PTO Flexible connection pipe Hydraulic lifting device of trolley by hand pump Speed equalizer Tachometer Mechanical lifting of drawbar Galvanized raingun trolley mounted on variable track pneumatic wheels Winding handle Safety guards Water Inlet Shut-Off Valve DESCRIPTION CODE LIST PRICE Marani GT050B 110mm x 300m A GT050B110300 $41943.00 Marani GT050B 110mm x 350m D GT050B110350 $42871.00 SIME Ranger Big Gun 25 140050 $1352.40 Nelson SR150 Gun SR150K $3000.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** OPTIONS CODE PRICE Computer MA-RAIN 26 35462700 $1697.30 Computer MA-RAIN 36 35430912 $993.30 Solar Panel 35000150 $429.00 Hydraulic Rotation with Hydraulic Lift of 80430300 $2824.00 Trolley and Hydraulic Lift of Drawbar with Tractor Jacks Emptying Compressor 75430550 $2728.00 PAGE: 63 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

If you need information on which gun best suits your needs, please call or email our office and ask for a specification sheet. Our sales email address is sales@rodneyind.com.au Standard Equipment: Telescopic mechanical feet 4 Speed gearbox Hot galvanized chassis and reel Turbine mounted on the gearbox with built-in bypass PTO Flexible connection pipe Hydraulic lifting device of trolley by hand pump Speed equalizer Tachometer Mechanical lifting of drawbar Galvanized raingun trolley mounted on variable track pneumatic wheels Winding handle Safety guards Water Inlet Shut-Off Valve DESCRIPTION CODE LIST PRICE Marani GT060B 110mm x 400m B GT060B110400 $48956.00 Marani GT060B 110mm x 450m E GT060B110450 $52000.00 SIME Ranger Big Gun 25 140050 $1352.40 Nelson SR150 Gun SR150K $3000.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** OPTIONS CODE PRICE Computer MA-RAIN 26 35462700 $1697.30 Computer MA-RAIN 36 35430912 $993.30 Solar Panel 35000150 $429.00 Hydraulic Rotation with Hydraulic Lift of 80430300 $2824.00 Trolley and Hydraulic Lift of Drawbar with Tractor Jacks Emptying Compressor 75430550 $2728.00 PAGE: 64 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

When dealing with your customer, do not forget to mention that a crane is required to unload many of our irrigators, (from the GT040B up). For weights and dimensions of all machines, please refer to pages 76 78 or contact our Sales Department. Standard Equipment: Telescopic hydraulic feet 4 Speed gearbox PTO Pressure gauge (glycerine bath) Turbine mounted on the gearbox with built-in bypass Flexible connection pipe Stabilizers on draw bar Hydraulic lifting device of trolley by hand pump Speed equalizer Tachometer Mechanical lifting of drawbar Galvanized raingun trolley mounted on variable track pneumatic wheels Water Inlet Shut-Off Valve Hot galvanized chassis and reel Winding handle Safety guards DESCRIPTION CODE LIST PRICE Marani GT070B 125mm x 400m C GT070B125400 $54951.00 SIME Explorer Big Gun 25 140055 $1960.00 SIME Mariner 25 2 Speed 140085 $1900.00 Nelson SR200 Gun SR200K $4940.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** OPTIONS CODE PRICE Computer MA-RAIN 26 35462700 $1697.30 Computer MA-RAIN 36 35430912 $993.30 Solar Panel 35000150 $429.00 Hydraulic Rotation with Hydraulic Lift of 80430300 $2824.00 Trolley and Hydraulic Lift of Drawbar with Tractor Jacks 4 Wheel Chassis with 5 pneumatic wheel trolley 75450000 $2376.00 Emptying Compressor 75430550 $2728.00 PAGE: 65 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

What are the operational benefits of the Marani Hard Hose Irrigator Range? Low pressure losses over the turbine Increased flow and low friction loss through HDPE pipe Fully Hot Dipped Galvanizing for longevity Top of the range computer controls for accurate water application Inclusion of a Solar Panel for trickle feeding batteries (optional extra) Standard Equipment: Telescopic hydraulic feet Pressure gauge (glycerine bath) PTO Hot galvanized chassis and reel Turbine mounted on the gearbox with built-in bypass Flexible connection pipe Speed equalizer 4 Speed gearbox with synchronised speeds Tachometer Mechanical lifting of drawbar Winding handle Safety guards Galvanized raingun trolley mounted on variable track pneumatic wheels Water Inlet Shut-Off Valve Hydraulic lifting device of trolley by hand pump DESCRIPTION CODE LIST PRICE Marani GTS080B 125mm x 450m D GTS080B125450 $68900.00 Marani GTS080B 125mm x 500m B GTS080B125500 $69305.00 Marani GTS080B 140mm x 380m E GTS080B140380 $67000.00 SIME Explorer Big Gun 25 140055 $1960.00 SIME Mariner 25 2 Speed 140085 $1900.00 SIME Gemini 25 2 Speed 140090 $3000.00 Nelson SR200 Gun SR200K $4940.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** OPTIONS CODE PRICE Computer MA-RAIN 26 35462700 $1697.30 Computer MA-RAIN 36 35430912 $993.30 Solar Panel 35000150 $429.00 All Hydraulic 80430300 $2824.00 Hydraulic Rotation 75430021 $2065.80 4 Wheel Chassis with 5 pneumatic wheel trolley 75450001 $2203.30 Emptying Compressor 75430550 $2728.00 PAGE: 66 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Did you know that for an additional fee, a Rodney Industries representative can go out onsite to commission the machine? They will assist your crew with the installation of the Hard Hose Irrigator as well as provide training to those in need. Ask for this service when you request your quote. Standard Equipment: 4 wheel chassis Pressure gauge (glycerine bath) Hydraulic lifting device of trolley PTO Hydraulic rotation of turntable Computer MA-RAIN 26 Hydraulic lifting of drawbar Hose retraction by double chain Telescopic hydraulic feet Hot galvanized chassis and reel Hydraulic system by rapid couplings to Turbine mounted on the gearbox with tractor built-in bypass Flexible connection pipe Winding handle Safety guards made of steel, swaged 4 Speed gearbox with synchronised galvanised and painted speeds Water Inlet Shut-Off Valve DESCRIPTION CODE LIST PRICE Marani GTS090B 140mm x 450m C GTS090B140450 $95588.00 SIME Explorer Big Gun 25 140055 $1960.00 SIME Gemini 25 2 Speed 140090 $3000.00 Nelson SR200 Gun SR200K $4940.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** OPTIONS CODE PRICE Computer MA-RAIN 36 35430912 $993.30 Solar Panel 35000150 $429.00 Emptying Compressor 75430550 $2728.00 PAGE: 67 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

What are the environmental benefits of the Marani Hard Hose Irrigator Range? Low environmental impact through the turbine efficiency Reduced pumping energy requirements Low carbon footprint due to reduced energy requirements Use of solar for battery charging Lower water wastage with accurate water application Standard Equipment: Hydraulic lifting device of trolley Hydraulic rotation of turntable Hydraulic feet Hydraulic lift of drawbar Hydraulic system by rapid couplings to tractor 6 Speed gearbox PTO Flexible connection pipe Turbine mounted on the gearbox with built-in bypass Speed equalizer Pressure gauge (glycerine bath) Tachometer Water Inlet Shut-Off Valve Galvanized raingun trolley mounted on variable track pneumatic wheels Hot galvanized chassis and reel Winding handle Safety guards DESCRIPTION CODE LIST PRICE Marani IT 040B 110mm x 250m B IT040B110250 $44900.00 Marani IT 040B 110mm x 300m C IT040B110300 $47394.00 SIME Ranger Big Gun 25 140050 $1352.40 SIME Mariner 25 2 Speed 140085 $1900.00 Nelson SR150 Gun SR150K $3000.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** OPTIONS CODE PRICE Computer MA-RAIN 26 35462700 $1697.30 Solar Panel 35000150 $429.00 Emptying Compressor 75430550 $2728.00 PAGE: 68 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Do you require additional information on this machine? Would you like a copy of the manual or performance charts? For all additional information regarding this machine, or any from our range of Marani Hard Hose Irrigators, please do not hesitate in contacting our Sales Department. Standard Equipment: Hydraulic lifting device of trolley Hydraulic rotation of turntable Hydraulic feet Hydraulic lift of drawbar Hydraulic system by rapid couplings to tractor 4 Speed gearbox PTO Flexible connection pipe Turbine mounted on the gearbox with built-in bypass Water Inlet Shut-Off Valve Pressure gauge (glycerine bath) Tachometer Speed equalizer Galvanized raingun trolley mounted on variable track pneumatic wheels Hot galvanized chassis and reel Winding handle Safety guards DESCRIPTION CODE LIST PRICE Marani IT 050B 110mm x 300m A IT050B110300 $48297.00 Marani IT 050B 110mm x 350m D IT050B110350 $49713.00 SIME Ranger Big Gun 25 140050 $1352.40 SIME Mariner 25 2 Speed 140085 $1900.00 Nelson SR150 Gun SR150K $3000.00 Marani IT 050B 125mm x 250m A IT050B125250 $49826.00 SIME Explorer Big Gun 25 140055 $1960.00 SIME Mariner 25 2 Speed 140085 $1900.00 Nelson SR200 Gun SR200K $4940.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** OPTIONS CODE PRICE Computer MA-RAIN 26 35462700 $1697.30 Solar Panel 35000150 $429.00 Emptying Compressor 75430550 $2728.00 PAGE: 69 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Interested in this machine but you do not have an account with a freight company? Don t panic. We have several freight companies delivering around Australia. Our despatch team can provide a competitive quote for transporting the machine to you (or your customer direct) you just need to organise the unloading. Hydraulic lifting device of trolley Hydraulic rotation of turntable Hydraulic feet Hydraulic lift of drawbar Hydraulic system by rapid couplings to tractor 4 Speed gearbox PTO Flexible connection pipe Turbine mounted on the gearbox with built-in bypass Standard Equipment: Tachometer Pressure gauge (glycerine bath) Water Inlet Shut-Off Valve Speed equalizer Galvanized raingun trolley mounted on variable track pneumatic wheels Hot galvanized chassis and reel Winding handle Safety guards DESCRIPTION CODE LIST PRICE Marani IT 060B 110mm x 400m B IT060B110400 $54317.00 Marani IT 060B 110mm x 450m E IT060B110450 $55295.00 SIME Ranger Big Gun 25 140050 $1352.40 SIME Mariner 25 2 Speed 140085 $1900.00 Nelson SR150 Gun SR150K $3000.00 Marani IT 060B 125mm x 300m A IT060B125300 $54177.00 Marani IT 060B 125mm x 350m C IT060B125350 $56178.00 SIME Explorer Big Gun 25 140055 $1960.00 SIME Mariner 25 2 Speed 140085 $1900.00 Nelson SR200 Gun SR200K $4940.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** OPTIONS CODE PRICE Computer MA-RAIN 26 35462700 $1697.30 Solar Panel 35000150 $429.00 Emptying Compressor 75430550 $2728.00 PAGE: 70 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

What are the commercial benefits of the Marani Hard Hose Irrigator Range? Long service life with low maintenance requirements due to minimal moving parts Cost effective installation Lower water costs due to accurate water application Labour cost savings due to ease of moving Hydraulic lifting device of trolley Hydraulic rotation of turntable Hydraulic feet Hydraulic lift of drawbar Hydraulic system by rapid couplings to tractor 4 Speed gearbox PTO Tachometer Galvanized raingun trolley mounted on variable track pneumatic wheels Standard Equipment: Flexible connection pipe Pressure gauge (glycerine bath) Water Inlet Shut-Off Valve Speed equalizer Turbine mounted on the gearbox with built-in bypass Hot galvanized chassis and reel Winding handle Safety guards DESCRIPTION CODE LIST PRICE Marani IT 070B 110mm x 500m D IT070B110500 $59656.00 Marani IT 070B 110mm x 550m B IT070B110550 $61325.00 SIME Ranger Big Gun 25 140050 $1352.40 SIME Mariner 25 2 Speed 140085 $1900.00 Nelson SR150 Gun SR150K $3000.00 Marani IT 070B 125mm x 400m C IT070B125400 $59810.00 Marani IT 070B 140mm x 300m A IT070B140300 $59220.00 Marani IT 070B 140mm x 350m D IT070B140350 $62489.00 SIME Explorer Big Gun 25 140055 $1960.00 SIME Mariner 25 2 Speed 140085 $1900.00 SIME Gemini 25 2 Speed 140090 $3000.00 Nelson SR200 Gun SR200K $4940.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** OPTIONS CODE PRICE Computer MA-RAIN 26 35462700 $1697.30 Solar Panel 35000150 $429.00 4 Wheel Chassis with 5 wheel trolley 75450000 $2376.00 Emptying Compressor 75430550 $2728.00 PAGE: 71 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Have you read our case study on the ITS080B Marani Hard Hose? A coal mine in Central Queensland needed to disperse large amounts of water with high flow rates and high losses they chose Marani. If you would like a copy sent to you, please do not hesitate in contacting our Sales Department. Standard Equipment: Hydraulic lifting device of trolley Hydraulic rotation of turntable Hydraulic feet Hydraulic lift of drawbar Hydraulic system by rapid couplings to tractor 4 Speed gearbox PTO Tachometer Galvanized raingun trolley mounted on variable track pneumatic wheels Flexible connection pipe Pressure gauge (glycerine bath) Water Inlet Shut-Off Valve Speed equalizer Turbine mounted on the gearbox with built-in bypass Hot galvanized chassis and reel Winding handle Safety guards DESCRIPTION CODE LIST PRICE Marani ITS 080B 110mm x 600m A ITS080B110600 $75000.00 Marani ITS 080B 125mm x 450m D ITS080B125450 $77000.00 SIME Ranger Big Gun 25 140050 $1352.40 Nelson SR150 Gun SR150K $3000.00 Marani ITS 080B 125mm x 500m B ITS080B125500 $79600.00 Marani ITS 080B 140mm x 380m E ITS080B140380 $78000.00 Marani ITS 080B 150mm x 300m A ITS080B150300 $79000.00 SIME Explorer Big Gun 25 140055 $1960.00 SIME Mariner 25 2 Speed 140085 $1900.00 SIME Gemini 25 2 Speed 140090 $3000.00 Nelson SR200 Gun SR200K $4940.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** OPTIONS CODE PRICE 4 Wheel chassis 15275880S P.O.A Computer MA-RAIN 36 35430910 $2743.40 Solar Panel 35000150 $429.00 Emptying Compressor 75430550 $2728.00 PAGE: 72 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

When dealing with your customer, do not forget to mention that a crane is required to unload many of our irrigators, (from the GT040B up). For weights and dimensions of all machines, please refer to pages 76-78 or contact our Sales Department. Standard Equipment: Hydraulic lifting device of trolley Hydraulic rotation of turntable Hydraulic feet Hydraulic lift of drawbar Hydraulic system by rapid couplings to tractor 4 Speed gearbox PTO Tachometer Galvanized raingun trolley mounted on variable track pneumatic wheels Flexible connection pipe Pressure gauge (glycerine bath) Water Inlet Shut-Off Valve Speed equalizer Turbine mounted on the gearbox with built-in bypass Hot galvanized chassis and reel Winding handle Safety guards DESCRIPTION CODE LIST PRICE Marani ITS 090B 140mm x 450m C ITS090B140450 $91000.00 Marani ITS 090B 140mm x 470m B ITS090B140470 $92000.00 SIME Explorer Big Gun 25 140055 $1960.00 SIME Gemini 25 2 Speed 140090 $3000.00 Nelson SR200 Gun SR200K $4940.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** OPTIONS CODE PRICE Computer MA-RAIN 36 35430912 $993.30 Solar Panel 35000150 $429.00 Emptying Compressor 75430550 $2728.00 PAGE: 73 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Did you know that for an additional fee, a Rodney Industries representative can go out onsite to commission the machine? They will assist your crew in the installation of the Hard Hose Irrigator as well as provide training to those in need. Ask for this service when you request your quote. Standard Equipment: Hydraulic lifting device of trolley Hydraulic rotation of turntable Hydraulic feet Hydraulic lift of drawbar Hydraulic system by rapid couplings to tractor 4 Speed gearbox PTO Tachometer Galvanized raingun trolley mounted on variable track pneumatic wheels Flexible connection pipe Pressure gauge (glycerine bath) Water Inlet Shut-Off Valve Speed equalizer Turbine mounted on the gearbox with built-in bypass Hot galvanized chassis and reel Winding handle Safety guards DESCRIPTION CODE LIST PRICE Marani IT 100B 140mm x 500m C IT100B140500 $106500.00 Marani IT 100B 140mm x 550m A IT100B140550 $109800.00 Marani IT 100B 140mm x 600m A IT100B140600 $111000.00 SIME Explorer Big Gun 25 140055 $1960.00 SIME Gemini 25 2 Speed 140090 $3000.00 Nelson SR200 Gun SR200K $4940.00 ** PLEASE SPECIFY GUN WHEN ORDERING ** OPTIONS CODE PRICE Computer MA-RAIN 36 35430912 $993.30 Solar Panel 35000150 $429.00 Emptying Compressor 75430551 $3888.50 PAGE: 74 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

One of the main options available on the Marani Hard Hose range from the GT022B model onwards, is a MA-Rain Computer. The following outlines the features of both the MA-Rain 26 and Ma-Rain 36. If you require any further details, please contact our Sales Department. The MA-Rain 26 computer features the following programmable functions: Working speed in mt\h or ft\h Delayed start (in minutes) before retraction starts Delayed stop (in minutes) before opening or closing the discharge valve (optional) or the shut-off valve (optional) The monitor then indicates: Remaining working time in hours and minutes Working speed in mt\h or ft\h Meters\feet of unwound hose The MA-Rain 36 computer features the following programmable functions: Working speed in mt\h or ft\h Working time Choose the amount of precipitation (in mm or inches) to be applied (this feature only available when equipped with optional flow meter) Delayed start (in minutes) before retraction starts Delayed stop (in minutes) before opening or closing the discharge valve (optional) or the shut-off valve (optional) 4 working zones with different speeds per irrigation run 4 working zones with different application rates per irrigation run (only if the machine is equipped with optional flow meter) The monitor then indicates: Meters\feet of unwound hone and hose pulled in Day and time of completion Flow in lt\min (gmp) and m3\h Remaining working time in hours and minutes Working speed in mt\h or ft\h Meters\feet of unwound hose PAGE: 75 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Below are the dimensions for the smallest Marani Hard Hose Irrigators. These machines can be loaded and unloaded with a forklift no crane required. If you\your customer does not have an account with a freight company, don t panic - we have several freight companies delivering around Australia. Our despatch team can provide a competitive quote for transporting the machine to you (or your customer direct) you just need to organise the unloading. MODEL SIZE (cm) A B C D DRY WEIGHT (Kg) F010B 50mm 279 190 130 162 398 GT015B 58mm 330 250 130 192 980 * Please note dimensions and weights are to be used as a guide only. PAGE: 76 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

From our GT040B model onwards a crane is required for loading and unloading. Please take this into account when you are quoting your customer on freight. For models GT022B through to GT030B a forklift is adequate. MODEL SIZE (cm) A B C D E F G H DRY WEIGHT (KG) GT020B 240 218 192 200 166 135 158 175 800 GT022B 290 230 200 180 175 170 169 225 1047 GT026B 325 265 235 225 195 193 199 255 1300 GT030B 330 296 265 245 205 225 224 280 1907 GT040B 340 314 286 260 210 225 246 295 2298 GT040C 340 324 296 270 210 225 246 295 2470 GT050B 420 353 318 286 228 240 268 350 2795 GT060B 375 360 320 303 240 233 280 335 3699 GT070B 375 385 345 325 243 235 309 360 3650 GTS080B 364 400 358 340 235 243 309 350 4775 GTS090B 440 451 416 376 255 243 334 440 6179 * Please note dimensions and weights are to be used as a guide only. PAGE: 77 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

All of the Hard Hose Irrigators listed below require a crane for loading and unloading. Please take this into account when you are quoting your customer on freight. If you\your customer does not have an account with a freight company, don t panic - we have several freight companies delivering around Australia. Our despatch team can provide a competitive quote for transporting the machine to you (or your customer direct) you just need to organise the unloading. MODEL SIZE (cm) A B C D E F G DRY WEIGHT (KG) IT050B 338 338 310 290 220 255 268 2895 IT060B 400 336 330 303 252 283 280 3350 IT070B 400 383 355 330 240 274 309 3850 ITS080B 410 395 365 348 249 282 309 5349 ITS090B 470 430 394 370 218 285 334 5987 ITS090B 470 430 400 376 218 285 334 5987 IT100B 498 450 420 396 265 312 363 7250 * Please note dimensions and weights are to be used as a guide only. PAGE: 78 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Efficient systems for effective irrigation. Developed in association with farmers, growers and groundsmen and proven around the world, Briggs Irrigation systems are kind to the crop, gentle on the ground and very easy for the operator. Features: There are many features that allow our range of Briggs Booms to stand out from the competitors, here are just a few: Booms are made from steel and are fully galvanised which ensures a long life span. The irrigators can be towed and operated from either end and the option of offset hose feed keeps the hose reel pipe in the wheeling, alleviating traction problems Semi-automatic locking catches mean that even the largest booms are genuinely one man operation with no lifting or carrying. All components are manufactured using modern technology and spares are readily available for any boom we have ever made. Options developed in conjunction with farmers around the world make the booms highly versatile. All are easy to operate, can be folded by one person in just a few minutes for transport. Booms can be operated in conjunction with our range of Briggs hose reels and MARANI Hard Hose Irrigators. PAGE: 79 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

The BRIGGS range of mounted booms provides efficient, accurate and uniform water distribution while being extremely easy to transport and set up. The booms are transported on the hose reel and a fixed lift system is used for safe, simple, one person operation. Boom Length: 18m (59 ) Lane Spacing: 18 32m (59 105 ) Band Width: 10 25m (33 82 ) Flow Capacity (m²\hr): 14 30 Operating Pressure: 15 60 PSI Quantity of Outlets: 9 Folded Length: 5m Folded Width: 2.8m (9 3 ) Track Width: 1.5 4m (60-160 ) Weight: 400kg SIZE CODE PRICE R18 FOLDING BOOM KIT ONLY NO TROLLEY 3 X PCS 3000 Nelson Spinners 6 X S3000 Nelson Spinners 9 X Nelson Press\Regs & B\Valves HH7500 $10425.00 R18 FOLDING BOOM INCLUDING TROLLEY CENTRE FEED c/w Centre Feed and 2 wheel trolley 3 X PCS 3000 Nelson Spinners 6 X S3000 Nelson Spinners 9 X Nelson Press\Regs & B\Valves HH7305 $14693.00 OPTIONAL EXTRAS Turntable Assembly HH7340 $5895.00 End Guns c\w Ball Valves (x2) HH7605 $726.00 High Lift Version (2.4m high) hand pump hydraulics HH7625 $5370.00 PAGE: 80 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Do you know what the benefits are of irrigating with a BRIGGS Boom? Even in windy conditions, you will be able to achieve 90% uniformity. Less energy is required therefore booms can operate at around half the pressure needed for rainguns. Boom Length: 24m (79 ) Lane Spacing: 24 42m (79 138 ) Band Width: 10 25m (33 82 ) Flow Capacity (m²\hr): 14 44 Operating Pressure: 15 60 PSI Quantity of Outlets: 11 Folded Length: 5m Folded Width: 3.4m (11 2 ) Track Width: 1.5 4m (60-160 ) Weight: 450kg SIZE CODE PRICE R24 FOLDING BOOM KIT ONLY NO TROLLEY 3 X PCS 3000 Nelson Spinners 8 X S3000 Nelson Spinners 11 X Nelson Press\Regs & B\Valves HH7510 $12493.00 R24 FOLDING BOOM INCLUDING TROLLEY CENTRE FEED c/w Centre Feed and 2 wheel trolley 3 X PCS 3000 Nelson Spinners 8 X S3000 Nelson Spinners 11 X Nelson Press\Regs & B\Valves HH7310 $16790.00 OPTIONAL EXTRAS Turntable Assembly HH7340 $5895.00 End Guns c\w Ball Valves (x2) HH7605 $726.00 High Lift Version (2.4m high) hand pump hydraulics HH7625 $5370.00 End Section Backing Plates c\w 180º Degree PCS3000 Spray jets HH7675 $860.00 PAGE: 81 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

With a BRIGGS Boom you can control the droplet size; reducing the probability of soil damage. Large droplets can be selected to reduce drift while fine droplets can be used to minimise damage to very delicate crops Talk about versatile! Boom Length: 29m (95 ) Lane Spacing: 30 48m (95 157 ) Band Width: 10 25m (33 82 ) Flow Capacity (m²\hr): 14 50 Operating Pressure: 15 60 PSI Quantity of Outlets: 13 Folded Length: 5m Folded Width: 3.4m (11 2 ) Track Width: 1.5 4m (60-160 ) Weight: 460kg SIZE CODE PRICE R30 FOLDING BOOM KIT ONLY NO TROLLEY 3 X PCS 3000 Nelson Spinners 8 X S3000 Nelson Spinners 11 X Nelson Press\Regs & B\Valves HH7515 $14318.00 R30 FOLDING BOOM INCLUDING TROLLEY CENTRE FEED c/w Centre Feed and 2 wheel trolley 3 X PCS 3000 Nelson Spinners 8 X S3000 Nelson Spinners 11 X Nelson Press\Regs & B\Valves HH7312 $17318.00 OPTIONAL EXTRAS Turntable Assembly HH7340 $5895.00 End Guns c\w Ball Valves (x2) HH7605 $726.00 High Lift Version (2.4m high) hand pump hydraulics HH7625 $5370.00 End Section Backing Plates c\w 180º Degree PCS3000 Spray jets HH7675 $860.00 PAGE: 82 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Do you need more information about the options available on our range of BRIGGS Low Pressure Booms? Why not contact our sales office for further information. They can supply application details as well to help you decide which model will best suit your requirements. Boom Length: 40m (131 ) Lane Spacing: 40 48m (131 157 ) Band Width: 10 25m (33 82 ) Flow Capacity (m²\hr): 20 50 Operating Pressure: 15 60 PSI Quantity of Outlets: 17 Folded Length: 5m Folded Width: 3.4m (11 2 ) Track Width: 1.5 4m (60-160 ) Weight: 620kg SIZE CODE PRICE R40 FOLDING BOOM KIT ONLY NO TROLLEY 3 X PCS 3000 Nelson Spinners 9 X S3000 Nelson Spinners 12 X Nelson Press\Regs & B\Valves HH7520 $16996.00 R40 FOLDING BOOM INCLUDING TROLLEY CENTRE FEED c/w Centre Feed and 4 wheel steer 3 X PCS 3000 Nelson Spinners 9 X S3000 Nelson Spinners 12 X Nelson Press\Regs & B\Valves Layflat Hose Connection Kit HH7315 $22466.00 OPTIONAL EXTRAS Turntable Assembly HH7340 $5895.00 High Lift Version (2.4m high) hand pump hydraulics HH7625 $5370.00 End Section Back Plates c\w 180º Nelson R3000 Rotators HH7680 $860.00 PAGE: 83 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Ranging in size from 50 to 64 metres, Briggs four-wheel chassis booms are efficient, tough, reliable and surprisingly versatile. All are easy to operate, can be folded by one person in just a few minutes for transport and can be operated with almost any make and size of hose reel, including the Briggs range and our MARANI Hard Hose Irrigators. Boom Length: 50m (154 ) Lane Spacing: 50 75m (154 246 ) Band Width: 10 25m (33 82 ) Flow Capacity (m²\hr): 22 82 Operating Pressure: 15 60 PSI Quantity of Outlets: 16 Folded Length: 7.1m Folded Width: 3.5m (11 6 ) Wheelbase: 3.8m (12 6 ) Track Width: 1.5 2m (60-80 ) Weight: 1500kg Turning Circle: 7.2m (23 6 ) SIZE CODE PRICE R50 FOLDING BOOM KIT ONLY NO CHASSIS 3 X PCS 3000 Nelson Spinners 13 X S3000 Nelson Spinners 16 X Nelson Press\Regs & B\Valves HH7525 $25568.00 R50 FOLDING BOOM INCLUDING TROLLEY CENTRE FEED c/w Centre Feed and 4 wheel steer 3 X PCS 3000 Nelson Spinners 13 X S3000 Nelson Spinners 16 X Nelson Press\Regs & B\Valves Layflat Hose Connection Kit HH7320 $36985.00 OPTIONAL EXTRAS Offset Feed HH7370 $3845.00 High Lift Kit HH7390 $6762.00 Drop Pipe Kit HH7394 $8761.50 Blanking Plates HH7372 $282.50 Gun Mounting Kit HH7382 $2134.50 Dual Nozzle Mounting Kit HH7368 $206.00 PAGE: 84 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Concerned about the bottom line? With a BRIGGS Boom, you can reduce water consumption by 20% compared with raingun systems. In addition, the low pressure operation helps reduce pumping costs and puts less strain on the pipeline Boom Length: 64m (210 ) Lane Spacing: 64 90m (210 236 ) Band Width: 10 25m (33 82 ) Flow Capacity (m²\hr): 22 82 Operating Pressure: 15 60 PSI Quantity of Outlets: 22 Folded Length: 7.2m Folded Width: 3.65m (12 ) Wheelbase: 3.8m (12 6 ) Track Width: 1.5 2m (60-80 ) Weight: 1750kg Turning Circle: 7.2m (23 6 ) SIZE CODE PRICE R64 FOLDING BOOM KIT ONLY NO CHASSIS 4 X PCS 3000 Nelson Spinners 16 X S3000 Nelson Spinners 22 X Nelson Press\Regs & B\Valves HH7530 $31036.00 R64 FOLDING BOOM INCLUDING TROLLEY CENTRE FEED c/w Centre Feed and 4 wheel steer 4 X PCS 3000 Nelson Spinners 16 X S3000 Nelson Spinners 22 X Nelson Press\Regs & B\Valves Layflat Hose Connection Kit HH7322 $41898.00 OPTIONAL EXTRAS Offset Feed HH7370 $3845.00 High Lift Kit HH7390 $6762.00 Drop Pipe Kit HH7394 $8761.50 Blanking Plates HH7372 $282.50 Gun Mounting Kit HH7382 $2134.50 Dual Nozzle Mounting Kit HH7368 $206.00 PAGE: 85 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

Important information: When selecting a Boom to mount onto a Hard Hose a Mounting Kit and Front Leg Mounts are required. Draw Bar Extension may be required depending on the size of tow vehicle MOUNTING KITS FOR HARD HOSE TO SUIT TO SUIT MARANI BRIGGS CODE LIST PRICE GT022B R1/1 HH7640 $1959.60 GT026B R2 HH7645 $1696.96 GT030B R2/1 HH7650 $1696.96 GT040B R3 HH7655 $1696.96 DRAWBAR EXTENSIONS FOR HARD HOSE TO SUIT TO SUIT MARANI BRIGGS CODE LIST PRICE GT022B R1 HH7660 $883.85 GT026-40B R2 / R3 HH7662 $732.35 FRONT STABILIZER LEG MOUNT FOR HARD HOSE TO SUIT TO SUIT MARANI BRIGGS CODE LIST PRICE GT022B R1/1 HH7665 $833.35 GT030B R2-1 HH7666 $833.35 GT040B R3 HH7668 $880.80 PAGE: 86 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.

PAGE: 87 ISSUE DATE: 01/10/2012 *THESE WHOLESALE PRICES DO NOT INCLUDE GST - ADD 10% FOR GST.