. TORION 94 / 8. With agricultural kinematics, implement carrier with quick-attachment system and earthmoving bucket. TORION 94 / 8. With Z-kinematics, implement carrier with quick-attachment system and earthmoving bucket. TORION 94 TORION 8 STD HL STD HL Cutting tool USM USM USM USM Mast length mm 600 000 600 000 Bucket capacity according to ISO 7546 m..0.0.8 Bucket width mm 700 700 700 700 Dumping height at max. lift height and 45 dumping angle (A) mm 850 460 880 50 Bucket clearance height (B) mm 500 400 500 400 Max. height to bucket base (C) mm 795 460 795 460 Max. height to bucket pivot (D) mm 4075 4640 4075 4640 Max. height to bucket top (E) mm 560 660 5580 60 Reach at max. lift height and 45 dumping angle (F) mm 74 05 5 960 Digging depth (G) mm 80 80 80 80 Height to above cab (H) mm 70 70 70 70 Height to over exhaust (I) mm 00 00 00 00 Ground clearance (J) mm 490 490 490 490 Wheelbase (K) mm 95 95 95 95 Overall length (L) mm 8605 9080 8550 9000 Overall length to outside edge of implement carrier (M) mm 70 7850 70 7850 Overall length to bucket pivot point (N) mm 749 7670 749 7670 Turning radius over bucket outside edge mm 6650 6885 660 6850 Breakaway power (SAE) kn 0 5 5 4 Straight tipping load kg 4400 800 800 0600 Articulated tipping load kg 400 000 00 900 Operating weight kg 9500 9750 8700 8950 Tyre size.5 R 5 (L).5 R 5 (L) TORION 94 TORION 8 Cutting tool USM USM Mast length mm 600 600 Bucket capacity according to ISO 7546 m 4.0.6 Bucket width mm 700 700 Dumping height at max. lift height and 45 dumping angle (A) mm 740 80 Bucket clearance height (B) mm 500 500 Max. height to bucket base (C) mm 645 645 Max. height to bucket pivot (D) mm 95 95 Max. height to bucket top (E) mm 5775 5695 Reach at max. lift height and 45 dumping angle (F) mm 50 70 Digging depth (G) mm 85 85 Height to above cab (H) mm 70 70 Height to over exhaust (I) mm 00 00 Ground clearance (J) mm 490 490 Wheelbase (K) mm 95 95 Overall length (L) mm 8580 8480 Overall length to outer edge of implement carrier (M) mm 700 700 Overall length to bucket pivot point (N) mm 758 758 Turning radius over bucket outside edge mm 665 660 Breakaway power (SAE) kn 40 0 Straight tipping load kg 5550 800 Articulated tipping load kg 500 000 Operating weight kg 8500 7800 Tyre size.5 R 5 (L).5 R 5 (L) Earthmoving bucket with short straight base for quick-attachment system. The bucket capacity can be approx. 0% greater in practice than as calculated according to ISO 7546. Bucket filling level depends on the material. operating weight and tipping load (fully articulated tipping load according to ISO 497-). Earthmoving bucket with short straight base for quick-attachment system. The bucket capacity can be approx. 0% greater in practice than as calculated according to ISO 7546. Bucket filling level depends on the material. operating weight and tipping load (fully articulated tipping load according to ISO 497-). USM = grader blade 84 85
. TORION 94 / 8. With agricultural kinematics, implement carrier with quick-attachment system and light material bucket. High bulk material density ( t/m ) TORION 94 TORION 8 STD HL STD HL Cutting tool USM USM USM USM Bucket capacity m 5.5 5.0 5.0 4.5 Bucket width mm 950 950 950 950 Dumping height at max. lift height (A) mm 450 0 550 0 Max. height to over bucket top (E) mm 6060 6480 5900 60 Reach at max. lift height (F) mm 550 0 450 50 Overall length (L) mm 8900 980 8770 970 Straight tipping load kg 00 00 900 9800 Fully articulated tipping load kg 00 9400 000 800 Operating weight kg 000 000 900 9400 Tyre size.5 R 5 (L).5 R 5 (L) TORION 94 / 8. With agricultural kinematics, implement carrier with quick-attachment system and high-tip bucket. High bulk material density ( t/m ) TORION 94 TORION 8 STD HL STD HL Cutting tool USM USM USM USM Bucket capacity m 5.0 4.5 4.5 4.0 Bucket width mm 700 700 700 700 Dumping height at max. lift height (A) mm 4590 560 4550 5040 Max. height to over bucket top (E) mm 6850 700 6680 70 Reach at max. lift height (F) mm 80 650 790 560 Overall length (L) mm 90 9550 9000 940 Straight tipping load kg 900 0500 400 900 Fully articulated tipping load kg 0900 8900 9700 7700 Operating weight kg 0600 0800 9700 9900 Tyre size.5 R 5 (L).5 R 5 (L) operating weight and tipping load (fully articulated tipping load according to ISO 497-). operating weight and tipping load (fully articulated tipping load according to ISO 497-). 86 87
. TORION 94 / 8. With agricultural kinematics, implement carrier with quick-attachment system and pallet fork. FEM IV pallet fork TORION 94 TORION 8 Lift height at max. reach (A) mm 840 840 Max. lift height (C) mm 85 85 Max. height to over pallet fork (E) mm 485 485 Reach in loading position (F) mm 985 985 Maximum possible reach (F max.) mm 680 680 Reach at max. lift height (F min.) mm 750 750 Fork tine length (G) mm 500 500 Basic machine overall length (L) mm 780 780 Straight tipping load kg 0700 9500 Fully articulated tipping load kg 900 800 Permissible load capacity on even ground = 60% of articulated static tipping load kg 550 4980 Permissible load capacity on even ground = 80% of articulated static tipping load kg 760 6640 Operating weight kg 8500 7800 Tyre size.5 R 5 (L).5 R 5 (L) TORION 94 / 8. With Z-kinematics, implement carrier with quick-attachment system and pallet fork. FEM IV pallet fork TORION 94 TORION 8 Lift height at max. reach (A) mm 780 780 Max. lift height (C) mm 680 680 Max. height to over pallet fork (E) mm 4680 4680 Reach in loading position (F) mm 00 00 Maximum possible reach (F max.) mm 655 655 Reach at max. lift height (F min.) mm 85 85 Fork tine length (G) mm 500 500 Basic machine overall length (L) mm 800 800 Straight tipping load kg 0700 9500 Fully articulated tipping load kg 900 800 Permissible load capacity on even ground = 60% of articulated static tipping load kg 5490 480 Permissible load capacity on even ground = 80% of articulated static tipping load kg 6500 5800 Operating weight kg 8050 7400 Tyre size.5 R 5 (L).5 R 5 (L) operating weight and tipping load (fully articulated tipping load according to ISO 497-). According to EN 474-. operating weight and tipping load (fully articulated tipping load according to ISO 497-). According to EN 474-. Load capacity limited by tilt rams of Z-kinematics. 88 89
. TORION 5-77. With P-kinematics, implement carrier with quick-change system and earthmoving bucket. TORION 5-77. With Z-kinematics, implement carrier with quick change and earthmoving bucket. TORION 5 TORION 40 TORION 77 STD HL STD HL STD HL Cutting tool USM USM USM USM USM USM Mast length mm 570 000 570 000 570 000 Bucket capacity according to ISO 7546 m.5.5.... Bucket width mm 500 500 500 500 500 500 Dumping height at max. lift height and 45 dumping angle (A) mm 740 05 790 50 775 5 Bucket clearance height (B) mm 480 4040 480 4040 80 980 Max. height to bucket base (C) mm 680 460 680 460 60 490 Max. height to bucket pivot (D) mm 90 450 90 450 860 445 Max. height to bucket top (E) mm 550 590 590 5860 50 5700 Reach at max. lift height and 45 dumping angle (F) mm 60 080 0 00 70 00 Digging depth (G) mm 55 5 55 5 0 95 Height to above cab (H) mm 50 50 50 50 00 00 Height to over exhaust (I) mm 950 950 950 950 900 900 Ground clearance (J) mm 490 490 490 490 460 460 Wheelbase (K) mm 975 975 975 975 95 95 Overall length (L) mm 7790 80 770 860 7690 80 Overall length to outer edge of implement carrier (M) mm 658 7074 658 7074 658 70 Overall length to bucket pivot point (N) mm 67 695 67 695 644 696 Turning radius over bucket outside edge mm 60 690 6090 670 5950 60 Breakaway power (SAE) kn 08 08 00 00 Straight tipping load kg 090 9000 000 840 9000 7400 Fully articulated tipping load kg 9750 7800 900 750 7750 6500 Operating weight kg 400 4560 900 460 60 880 Tyre size 0.5 R 5 (L) 0.5 R 5 (L) 7.5 R 5 (L) TORION 5 TORION 40 TORION 77 Cutting tool USM USM USM Mast length mm 500 500 400 Bucket capacity according to ISO 7546 m.5..8 Bucket width mm 500 500 500 Dumping height at max. lift height and 45 dumping angle (A) mm 70 760 70 Bucket clearance height (B) mm 480 480 0 Max. height to bucket base (C) mm 680 680 50 Max. height to bucket pivot (D) mm 90 90 760 Max. height to bucket top (E) mm 50 570 4980 Reach at max. lift height and 45 dumping angle (F) mm 0 060 975 Digging depth (G) mm 40 40 80 Height above cab (H) mm 50 50 00 Height over exhaust (I) mm 950 950 900 Ground clearance (J) mm 490 490 460 Wheelbase (K) mm 975 975 95 Overall length (L) mm 7680 760 780 Overall length to outer edge of implement carrier (M) mm 64 64 660 Overall length to bucket pivot point (N) mm 67 67 60 Turning radius over bucket outside edge mm 6080 6050 5890 Breakaway power (SAE) kn 05 00 86 Straight tipping load kg 00 000 800 Articulated tipping load kg 9800 9000 700 Operating weight kg 4400 700 400 Tyre size 0.5 R 5 (L) 0.5 R 5 (L) 7.5 R 5 (L) The bucket capacity can be approx. 0% in practice than as calculated according to ISO 7546. Bucket filling level depends on the material. operating weight and tipping load (fully articulated tipping load according to ISO 497-). Earthmoving bucket with short straight base for quick attachment. The bucket capacity can be approx. 0% in practice than as calculated according to ISO 7546. Bucket filling level depends on the material. operating weight and tipping load (fully articulated tipping load according to ISO 497-). USM = grader blade Note: For stockpile removal operations, teeth, hydraulic quick-attachment systems and installation kits are not permitted. 90 9
. TORION 5-77. With P-kinematics, implement carrier with quick-attachment system and light material bucket. High bulk material density ( t/m ) TORION 5 TORION 40 TORION 77 STD HL STD HL STD HL Cutting tool USM USM USM USM USM USM Bucket capacity m 4.5 4.0 4.0.50.50.0 Bucket width mm 700 700 700 700 700 700 Dumping height at max. lift height (A) mm 80 0 490 40 480 5 Max. height to over bucket top (E) mm 5705 670 5585 600 590 5900 Reach at max. lift height (F) mm 470 60 60 0 460 0 Overall length (L) mm 80 8500 7955 8450 7940 890 Straight tipping load kg 000 8700 9900 8000 8450 750 Fully articulated tipping load kg 900 7600 870 7040 7400 680 Operating weight kg 470 4740 400 4450 950 050 Tyre size 0.5 R 5 (L) 0.5 R 5 (L) 7.5 R 5 (L) TORION 5-77. with P-kinematics, implement carrier with quick-attachment system and high-tip bucket. High bulk material density ( t/m ) TORION 5 TORION 40 TORION 77 STD HL STD HL STD HL Cutting tool USM USM USM USM USM USM Bucket capacity m 4.0.50.50.0.0.5 Bucket width mm 700 700 700 700 700 500 Dumping height at max. lift height (A) mm 4470 500 4560 50 450 5090 Max. height to over bucket top (E) mm 640 7095 640 6985 660 6680 Reach at max. lift height (F) mm 550 70 460 50 550 70 Overall length (L) mm 80 860 8080 8590 8080 850 Straight tipping load kg 980 7680 8800 700 740 680 Fully articulated tipping load kg 800 6760 770 680 650 5590 Operating weight kg 560 5560 490 5090 590 450 Tyre size 0.5 R 5 (L) 0.5 R 5 (L) 7.5 R 5 (L) operating weight and tipping load (fully articulated tipping load according to ISO 497-). operating weight and tipping load (fully articulated tipping load according to ISO 497-). 9 9
. TORION 5-77. with P-kinematics, implement carrier with quick-attachment system and pallet fork. Pallet fork TORION 5 TORION 40 TORION 77 Pallet fork type FEM IV FEM III FEM IV FEM III FEM III Mast length mm 570 570 570 570 570 Lift height at max. reach (A) mm 700 740 700 740 670 Max. lift height (C) mm 705 740 705 740 675 Max. height to over pallet fork (E) mm 4700 4664 4700 4664 4600 Reach in loading position (F) mm 080 060 080 060 40 Maximum possible reach (F max.) mm 680 700 680 700 800 Reach at max. lift height (F min.) mm 75 75 75 75 840 Fork tine length (G) mm 00 00 00 00 00 Basic machine overall length (L) mm 660 6590 660 6590 6650 Straight tipping load kg 8650 8750 8080 850 70 Fully articulated tipping load kg 7650 770 70 700 640 Permissible load capacity on even ground = kg 4550 460 470 40 700 60% of articulated static tipping load Permissible load capacity on even ground = kg 6000 5000 5700 5000 4900 80% of articulated static tipping load Operating weight kg 4040 80 670 40 00 Tyre size 0.5 R 5 (L) 0.5 R 5 (L) 7.5 R 5 (L) TORION 5-77. with Z-kinematics, implement carrier with quick-attachment system and pallet fork. Pallet fork TORION 5 TORION 40 TORION 77 Loading fork type FEM IV FEM III FEM IV FEM III FEM III Mast length mm 500 500 500 500 400 Lift height at max. reach (A) mm 740 780 740 780 680 Max. lift height (C) mm 700 740 700 740 570 Max. height to over fork carriage (E) mm 4695 4664 4695 4664 4500 Reach in loading position (F) mm 995 965 995 965 00 Maximum possible reach (F max.) mm 640 660 640 660 650 Reach at max. lift height (F min.) mm 690 70 690 70 70 Fork tine length (G) mm 00 00 00 00 00 Basic machine overall length (L) mm 650 650 650 650 645 Straight tipping load kg 8500 8580 760 7700 600 Fully articulated tipping load kg 7500 7560 6700 6800 5500 Permissible load capacity on even ground = kg 4480 450 4000 4050 90 60% of articulated static tipping load Permissible load capacity on even ground = kg 500 5000 4 500 5000 4 400 80% of articulated static tipping load Operating weight kg 4060 80 450 00 060 Tyre size 0.5 R 5 (L) 0.5 R 5 (L) 7.5 R 5 (L) operating weight and tipping load (fully articulated tipping load according to ISO 497-). According to EN 474-. Load capacity limited by FEM III fork carriage and tines to 5,000 kg. operating weight and tipping load (fully articulated tipping load according to ISO 497-). According to EN 474-. Load capacity limited by tilt rams of Z-kinematics. 4 Load capacity limited by FEM III fork carriage and tines to 5,000 kg. 94 95
. TORION 69 / 55. with Z-kinematics, implement carrier with quick-attachment system and earthmoving bucket. TORION 69 / 55. with Z-kinematics, implement carrier with quick-attachment system and pallet fork. TORION 69 TORION 55 Cutting tool USM USM Mast length mm 00 00 Bucket capacity according to ISO 7546 m.0 0.8 Bucket width mm 00 900 Material density t/m.8.8 Dumping height at max. lift height and 4 dumping angle (A) mm 640 55 Clearance height (B) mm 000 800 Max. height to bucket base (C) mm 80 990 Max. height to bucket pivot (D) mm 70 90 Max. height to bucket top (E) mm 460 400 Reach at max. lift height and 4 dumping angle (F) mm 80 750 Max. reach at 4 dumping angle (F max.) 600 490 Digging depth (G) mm 57 70 Height to above cab (H) mm 460 460 Height to over exhaust (I) mm 80 80 Ground clearance (J) mm 5 5 Wheelbase (K) mm 50 50 Overall length (L) mm 555 545 Overall length to outer edge of implement carrier (M) mm 4640 4595 Overall length to bucket pivot point (N) mm 4570 455 Turning radius over bucket outside edge mm 4465 40 Breakaway power (SAE) kn 56 46 Straight tipping load kg 4400 900 40 articulated tipping load kg 850 450 Operating weight kg 5600 580 Tyre size 40/80 R 8 40/80 R 8 TORION 69 TORION 55 Loading fork type FEM II FEM II Lift height at max. reach (A) mm 470 70 Max. lift height (C) mm 00 000 Max. height to over fork carriage (E) mm 865 680 Reach in loading position (F) mm 80 780 Max. reach (F max.) mm 0 0 Reach at max. lift height (F min.) mm 55 450 Fork tine length (G) mm 00 00 Basic machine overall length (L) mm 4744 4700 Straight tipping load kg 500 00 40 articulated tipping load kg 00 800 Permissible load capacity on even ground = 60% of articulated static tipping load kg 850 650 Permissible load capacity on even ground = 80% of articulated static tipping load kg 400 000 Operating weight kg 5470 5050 Tyre size 40/80 R 8 40/80 R 8 The bucket capacity can be approx. 0% in practice than as calculated according to ISO 7546. Bucket filling level depends on the material. The above values apply for the specified tyres, including all lubricants, full fuel tanks, ROPS / FOPS cab and driver. Tyre size and additional equipment change operational weight and tipping load (40 articulated tipping load according to ISO 497-). USM = grader blade The above values apply for the specified tyres, including all lubricants, full fuel tanks, ROPS / FOPS cab and driver. Tyre size and additional equipment change operational weight and tipping load (40 articulated tipping load according to ISO 497-). According to EN 474-. Load capacity limited by tilt rams. 96 97
TORION 94 8 5 40 77 69 55 Loading system Operating weight kg 9500 8700 400 900 60 5600 580 Mast variants available Agricultural / Agricultural High- Lift / Z Agricultural / Agricultural High- Lift / Z P / P High-Lift / Z P / P High-Lift / Z P / P High-Lift / Z Z Tip load fully articulated kg 400 00 9750 900 7750 850 450 (max.) Tip load, straight 4400 800 090 000 9000 4400 900 Engine Stage IV (Tier 4) Manufacturer Liebherr Liebherr DPS DPS DPS Yanmar Yanmar Model D944 A7 D94 A7 404HFL09 404HFL09 404HFL09 4TNV98C 4TNV98C Layout / number of cylinders R 4 R 4 R 4 R 4 R 4 R 4 R 4 Cubic capacity l 7.96 7.0 4.50 4.50 4.50.. Max. gross output according to ISO 046 and SAE J995 Max. net output according to ISO 949 and SAE J49 Max. torque according to ISO 949 and SAE J49 kw/hp 68/8 (at 00 800 rpm) kw/hp 65/4 (at 00 800 rpm) Nm 4 (at 00 rpm) 4/95 at 00 800 rpm) 40/9 (at 00 800 rpm) 5 (at 00 rpm) /67 (at 000 rpm) /65 (at 000 rpm) 68 (at 500 rpm) Exhaust aftertreatment DOC + SCR 4 DOC + SCR 4 DPF + DOC + SCR 4/55 (at 000 rpm) /5 (at 000 rpm) 68 (at 500 rpm) DPF + DOC + SCR 0/40 (at 000 rpm) 0/7 (at 000 rpm) 548 (at 500 rpm) DPF + DOC + SCR 50/68 (at 400 rpm) Z 9 (at 560 rpm) DPF + DOC 46/6 (at 00 rpm) 9 (at 400 rpm) DPF + DOC Working hydraulics Gear pump, priority valve l/bar 77/0 70/0 LS pump, LS valves l/bar 4/60 4/0 70/50 70/50 6/0 (Z-kinematics) LS pump, LS valves l/bar 70/50 70/50 6/0 (P-kinematics) LS pump, LS valves (agricultural kinematics) l/bar 4/80 4/50 Filtration Work cycle time at rated load Kinematics variant Return-line filter in hydraulic tank Z agricultural agricultural Return-line filter in hydraulic tank Suction return-line filter in hydraulic tank Z P Z P Z P Z Z Z Lifting s 5.5 5.5 5.5 5.5 6.0 6.4 6.0 6.4 5.4 5. 6.5 5. Dumping s.5..5. 4.7.4 4.7.4.0.0.5. Lowering (empty) s.7.7.7.7 5.6.9 5.6.9 5.0.9 4.0.9 Ground drive Transmission type Driving ranges km/h 0 40 CMATIC (split-power) 0 40 0 6 / 0 6 / 0 40 VARIPOWER (hydrostatic) 0 6 / 0 6 / 0 40 0 6 / 0 6 / 0 40 Hydrostatic 0 6 / 0 0 0 6 / 0 0 Top speed, max. 5 km/h 40 40 40 40 40 0 0 TORION 94 8 5 40 77 69 55 Tank capacity overview Fuel tank diesel l 80 80 05 05 05 50 50 Urea tank l 67.50 67.50 0 0 0 Hydraulic oil total quantity l 75 75 80 80 70 90 90 Axles Front axle Rigid Rigid Rigid Rear axle 6 Front differential lock The values shown vary according to tyres, earthmoving bucket (bucket capacity in accordance with ISO 7546, may be up to 0% more in practice, bucket filling level depends on type of material), kinematics variant, includes all lubricants, full fuel tank, ROPS/FOPS cab and driver. Tyre dimensions and supplementary equipment will affect the operating weight and tipping load. According to ISO 497-. TORION 69 and 55 models according to Stage IIIB (Tier 4i). 4 Diesel particulate filter available as optional equipment. 5 The TORION 94-77 models are available for registration as self-propelled work machines with maximum top speed limitation to 0 km/h or 5 km/h. 6 Oscillation angle is limited according to tyre variant. Full floating with oscillation angle on each side Self-locking differential, 45% in both axles Full floating with 0 oscillation angle on each side Self-locking differential, 45% in both axles Articulated joint with 0 oscillation angle on each side Self-locking differential, 45% in both axles Articulation angle (on each side) degrees 40 40 40 40 40 40 40 Service brake Type Hydraulic pump accumulator brake system (wet disc brake, two separate brake circuits) Hydraulic pump accumulator brake system (wet disc brake, two separate brake circuits) Hydraulically operated drum brake Location Front and rear axle final drive Front and rear axle differential housing Axle input on front axle Parking brake Type Electrohydraulically operated spring disc brake Electrohydraulically operated spring disc brake Mechanically operated drum brake Location Transmission Front axle Axle input on front axle TORION 94 8 5 40 77 69 55 SMART LOADING / electronics competence Programmable bucket return position Set lifting and lowering heights Weighing system TELEMATICS TORION 94 8 Tyres Vehicle width.5 R 5 Michelin XHA (L), industrial m.65.65.5 R 5 Bridgestone EM VJT (L), industrial m.67.67.5 R 5 Goodyear RT-B (L), industrial m.67.67.5 R 5 Goodyear TL-A+ (L), industrial m.67.67.5 R 5 Michelin XTLA (L), industrial m.65.65 650 / 75 R Michelin Mega X Bib, AS m.7.7 650 / 75 R Trelleborg TM 000, AS m.67.67 750 / 65 R 6 Michelin Cerexbib, AS m.89.89 TORION 5 40 77 Tyres Vehicle width 7.5 R 5 Bridgestone EM VJT (L), industrial m.44 7.5 R 5 Michelin XHA (L), industrial m.46 7.5 R 5 Michelin XTLA (L), industrial m.46 7.5 R 5 Goodyear RT-B (L), industrial m.46 7.5 R 5 Goodyear TL-A+ (L), industrial m.46 0.5 R 5 Bridgestone EM VJT (L), industrial m.48.48.48 0.5 R 5 Michelin XHA (L), industrial m.48.48.48 0.5 R 5 Michelin XTLA (L), industrial m.5.5.5 0.5 R 5 Goodyear RT-B (L), industrial m.49.49.49 0.5 R 5 Goodyear TL-A+ (L), industrial m.50.50.50 60 / 75 R 6 Michelin Mega X Bib, AS m.60.60.60 60 / 75 R 6 Trelleborg TM 000, AS m.64.64.64 60 / 70 R 6 Michelin Cerexbib, AS m.69.69.69 750 / 65 R 6 Michelin Mega X Bib, AS m.85.85.85 TORION 69 55 Tyres Vehicle width 5.5 / 55 R 8 Dunlop SPPG7 (L), industrial m.76.76 65 / 70 R 8 Mitas EM-0 (L), industrial m.76 65 / 70 R 8 Dunlop SPT9 (L), industrial m.75 65 / 80 R 0 Dunlop SPT9 (L), industrial m.75.75 65 / 80 R 0 Firestone Duraforce UT (L), industrial m.76.76 65 / 80 R 0 Mitas EM-0 (L), industrial m.76.76 65 / 80 R 0 Bridgestone VUT (L), industrial m.75.75 400 / 70 R 0 Michelin XMCL, AS m.79.79 400 / 70 R 0 Michelin Bibload (L), industrial m.78.78 400 / 70 R 0 Firestone Duraforce UT (L), industrial m.78.78 400 / 70 R 0 Firestone R8000 UT, AS m.78.78 400 / 70 R 0 Trelleborg TH400 (L), AS m.78.78 405 / 70 R 8 Dunlop SPT9 (L), industrial m.78.78 405 / 70 R 8 Firestone Duraforce UT (L), industrial m.79.79 405 / 70 R 8 Mitas EM-0 (L), industrial m.79.79 405 / 70 R 0 Mitas EM-0 (L), industrial m.79.79 405 / 70 R 0 Dunlop SPT9 (L), industrial m.78.78 405 / 70 R 0 Bridgestone VUT (L), industrial m.79.79 CLAAS continually develops its products to meet customer requirements. This means that all products are subject to change without notice. All descriptions and specifications in this brochure should be considered approximate and may include optional equipment that is not part of the standard specifications. This brochure is designed for worldwide use. Please refer to your nearest CLAAS dealer and their price list for local specification details. Some protective panels may have been removed for photographic purposes in order to present the function clearly. To avoid any risk of danger, never remove these protective panels yourself. In this respect, please refer to the relevant instructions in the operator's manual. All technical specifications relating to engines are based on the European emissions regulation standards: Stage. Any reference to the Tier standards in this document is intended solely for information purposes and ease of understanding. It does not imply approval for regions in which emissions are regulated by Tier. The values shown are indicative and may differ in practice. Over tyres. Standard Optional Available Not available Standard Optional Available Not available Standard Optional Available Not available HRC / 4000007 KK DC 7 / 00 059 74 0