FINISHING Spray Guns
Spray Finishing Technologies TECHNOLOGY & Finish Quality TECHNOLOGY FINISH QUALITY Air Spray - Delta Spray AIR SPRAY Atomisation through air pressure. Easy to use. Typically has 3 bar air pressure and about 1-2 bar fluid pressure at the gun. Fine and smooth finish. High quality decorative finish. HVLP - Delta Spray HVLP Atomisation through high volume but low air pressure. About 0,7 bar atomising air and 1-2 bar fluid pressure at the gun. Close to air spray, if using low flow rates. Airless - Silver Plus AIRLESS Hydraulic atomisation: directing fluid under high pressure through a controlled orifice. Fluid pressure up to 500 bar. Quickly applies high volumes of coatings with medium to coarse quality. Air-Assisted - Alpha /Alpha Plus AIR-ASSISTED Hybrid atomisation combining airless and air spray. Atomising air up to 3 bar and up to 200 bar fluid pressure. Between air spray and airless. Relatively smooth, but for higher material flow rates. Electrostatic - PRO Xs ELECTROSTATIC Spray of charged paint particles based on air spray or air-assisted technology. Typically up to 180 bar. Fine and smooth finish. Excellent film coverage and reduced overspray.
TYPICAL FLUIDS & Applications FLUIDS APPLICATIONS AIR SPRAY Low and medium viscosity fluids. Solvent borne and waterborne coatings, topcoats, wash coats, stains, clear coats, and adhesion promoters. Automotive, metal and wood decorative finishing. All operations that require superior finish quality. HVLP Low and medium viscosity fluids. Solvent borne and waterborne coatings, topcoats, clear coats. Wood and metal finishing for all kinds of parts and shapes. AIRLESS Medium to high viscosity fluids. More protective coatings, solvent borne and waterborne. Large surfaces like metal constructions, storage tanks, ships. AIR-ASSISTED For a large range of viscosities. Solvent borne and waterborne coatings, base coats, topcoats, clear coats. Wood furniture top coats, commercial vehicles like bus and truck. ELECTROSTATIC Low to medium viscosity fluids. Large range of fluids. Automobile, aircraft, truck and bus, wooden chairs and window frames. Spray Finishing Technologies
Graco Spray Guns MANUAL Guns Delta Spray Air Spray Features Max. Fluid Flow & Benefits Pressure Range Delta Spray - Air Spray 7 bar 0,12-1,05 l/min Ergonomic gun handle to reduce operator fatigue. Uniform and well balanced spray pattern. Can be converted from air spray to HVLP. Pressure feed, siphon feed, gravity feed gun models, SST construction. Delta Spray HVLP Silver Plus Airless Delta Spray - HVLP 7 bar 0,12-0,60 l/min Ergonomic gun handle to reduce operator fatigue. Uniform and well balanced spray pattern. Can be converted from HVLP to air spray. Pressure feed, pressure cup feed, gravity feed gun models, SST construction. Silver Plus 345 bar 0,20-26,66 l/min Ergonomic gun design. Patented needle design for longer life. SST construction with no adjustment needle for quick repair. Available with RAC tips for easy cleaning. Flex Plus Airless Flex Plus 345 bar 0,20-26,66 l/min Ergonomic gun design. Fluid hose connects direct to head of gun. SST construction with no adjustment needle for quick repair. Available with RAC tips for easy cleaning. Model 510 Airless Model 510 510 bar 0,20-26,66 l/min Large fluid path with no spring in path (no material clogging). Patented needle design for longer life. Available with GHD RAC tip for easy cleaning. Contractor 248 bar 0,20-17 l/min In-handle paint filter and built-in hose swivel. SST gun fluid tube. Comfort grip handle. Contractor Airless
MANUAL Guns Alpha Spray Medium Pressure Air-Assisted Features Max. Fluid Flow & Benefits Pressure Range Alpha Spray 105 bar 0,10-0,80 l/min Designed for soft spray atomisation and easy flushing. SST construction with inlet filter. Small, lightweight and well balanced for operator comfort. Alpha Plus High Pressure Air-Assisted Alpha Plus 280 bar 0,10-3,4 l/min RAC tip design available to minimize downtime. SST construction, easy to flush. Light trigger pull and comfortable handle to reduce operator fatigue. Pro Xs2 Electrostatic Air Spray PRO Xs2 7 bar 0,10-1,5 l/min Easy installation without electrical connections. Size and weight comparable to a conventional air spray gun. Optional handle grip sizes. Excellent material savings with affordable investment. Pro Xs3 Electrostatic Air Spray PRO Xs3 7 bar 0,10-1,5 l/min Easy installation without electrical connections. Adjustable voltage at the gun. Available SMART version with showing voltage and current on the gun. 60 kv, 3 models: standard, high conductivity and waterborne coatings. PRO Xs4 7 bar 0,10-1,5 l/min Easy installation without electrical connections. Adjustable voltage at the gun. Available SMART version, showing voltage and current on the gun. 85 kv, compact and lightweight. Pro Xs4 Electrostatic Air Spray PRO Xs4 AA 207 bar 0,10-1,5 l/min Maximum material savings for hand held guns. Easy installation without electrical connections. Adjustable voltage at the gun. Available SMART version with showing voltage and current on the gun. 85 kv, compact and lightweight. Pro Xs4 AA Air-Assisted Electrostatic
Graco Spray Guns AUTOMATIC Guns Delta Spray Automatic Air Spray Features Max. Fluid Flow & Benefits Pressure Range Delta Spray Automatic - Air Spray 7 bar 0,12-1,35 l/min Modular design for easy installation and service. Small compact design for mounting flexibility. SST construction, convertible to HVLP. Delta Spray Automatic HVLP Delta Spray Automatic - HVLP 7 bar 0,12-0,72 l/min Modular design for easy installation and service. Small compact design for mounting flexibility. SST construction, high spray quality. AL Plus Automatic 280 bar 0,2-25,4 l/min Compact design with low cost of ownership. SST construction for durability and a high variety of coatings. Capable of high production speed. AL Plus Automatic Airless AA Plus Automatic 276 bar 0,2-2,2 l/min Compact design with easy-to-install needle cartridge. SST construction for durability and high variety of coatings. Excellent transfer efficiencies. AA plus Air-Assisted PRO AUTO Xs 7 bar 0,10-1,5 l/min Easy installation without electrical connections, adjustable voltage at the gun. Design for easy installation and removal for servicing. With protective hood. Max. 85 kv. Pro Auto Xs Electrostatic Air Spray PRO AUTO Xs4 AA 207 bar 0,10-1,5 l/min Easy installation without electrical connections, adjustable voltage at the gun. Design for easy installation and removal for servicing. With protective hood. Max. 85 kv. Pro Auto Xs4 AA Electrostatic Air-Assisted
YOUR Selection Less overspray = saves money + protects the environment Less material consumption Less waste Less spray booth cleaning Less energy cost for air and water make-up ATOMISATION VS. FLOW RATE CHART Very Coarse Coarse Atomisation Medium Fine HVLP Air Assisted Airless Airless Relative atomisation and typical flow rate comparison of atomisation methods. Air Spray Very Fine 0,3 l/min 0,7 l/min 1,5 l/min Spray Gun Application Rate (Flow) EXPECTED OVERSPRAY RATE AIR ATOMIZA- TION HYDRAULIC ATOMIZA- TION AIR SPRAY HVLP AIRLESS AIR ASSISTED AIRLESS ASTM : Measuring Method Variable overspray rate, depending on part size and shape. ELECTRO- STATIC SPRAY AIR SPRAY AIR ASSISTED AIRLESS ESTIMATED OVERSPRAY IN % Your Graco distributor can help you to select the right method and product for your application. Your Selection
Spray Guns ABOUT GRACO PROVEN QUALITY. LEADING TECHNOLOGY. Founded in 1926, Graco is among the leading group in fluid handling systems and components. Graco products move, measure, control, dispense and apply a wide range of fluids and viscous materials used in vehicle lubrication, commercial and industrial settings. The company s success is based on its unwavering commitment to technical excellence, world-class manufacturing and first-class customer service. Working closely with qualified distributors, Graco offers systems, products and technology which set quality standards in a wide range of fluid handling solutions. Graco provides equipment for spray finishing, protective coating, paint circulation, lubrication, and dispensing sealants and adhesives, along with power application equipment for the contractor industry. Graco s ongoing investment in fluid management and control will continue to provide innovative solutions to a diverse global market. GRACO HEADQUARTERS AMERICAS MINNESOTA Worldwide Headquarters Graco Inc. 88-11th Avenue N.E. Minneapolis, MN 55413 MAILING ADDRESS P.O. Box 1441 Minneapolis, MN 55440-1441 Tel 612 623-6000 Fax 612 623-6777 MICHIGAN Automotive Headquarters and Sales Office 47800 Halyard Drive Plymouth, MI 48170 Tel 734 416-3400 Fax 734 416-3441 EUROPE BELGIUM European Headquarters Graco N.V. Industrieterrein - Oude Bunders Slakweidestraat 31 3630 Maasmechelen, Belgium Tel 32 89 770 700 Fax 32 89 770 777 E-mail: info@graco.be ASIA PACIFIC JAPAN Graco K.K. 1-27-12 Hayabuchi Tsuzuki-ku Yokohama City, Japan 2240025 Tel 81 45 593 7300 Fax 81 45 593 7301 CHINA Graco Hong Kong Ltd. Representative Office, Room 118 1st Floor No. 2 Xin Yuan Building No. 509 Cao Bao Road Shanghai, P.R.China 200233 Tel 86 21 649 50088 Fax 86 21 649 50077 KOREA Graco Korea Inc. 3rd Fl., Doorim Bldg. 164-21 Poi-Dong, Kangnam-Ku Seoul, Korea 135-260 Tel 82 2 575-8901 Fax 82 2 571-9422 All data in this document is based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. Graco Inc. is certified ISO 9001. GRACO N.V. Industrieterrein Oude Bunders Slakweidestraat 31 B-3630 Maasmechelen Tel: +32 (89) 770 700 Fax: +32 (89) 770 777 E-mail: info@graco.be Internet: www.graco.be 2002 Graco N.V. Form No. 300-612 E 10/02 Printed in Europe. All other brand names or marks are used for identification purposes and are trademarks of their respective owners.
Delta Spray Ordering Information 1. Determine type of feed (Pressure, Siphon or Gravity). 2. Select material viscosity. 3. Select average flow rate. 4. Select pattern width. Delta Spray Air Spray Guns Gun Needle/ Orifice Pattern Material Usage: Assembly Nozzle Kit Size Width Viscosity Average Flow Part No. Part No. in (mm) in (mm) oz/min (lpm) Pressure Feed Guns: Air Spray Gun Assemblies 239540 239590 0.030 (0.762) 15 (381) Light 4-12 (0.12-0.36) 239541 239591 0.042 (1.067) 17 (432) Light-Medium 8-20 (0.24-0.60) 239542 239592 0.055 (1.397) 17 (432) Medium 16-30 (0.48-0.90) 239543 239593 0.070 (1.778) 18 (457) Medium-Heavy 16-35 (0.48-1.05) 239544 239594 0.086 (2.184) 13 (330) Heavy 16-40 (0.48-1.20) 239545 239595 0.110 (2.790) 11 (279) Heavy 16-45 (0.48-1.35) 239548* 239596* 0.042 (1.067) 17 (432) Light-Medium 8-20 (0.24-0.60) 239549* 239597* 0.055 (1.397) 17 (432) Medium 16-30 (0.48-0.90) 243522* 239588* 0.070 (1.778) 18 (457) Medium-Heavy 16-35 (0.48-1.05) Spatter or Specking Gun Assembly 243640 243542 0.042 (1.067) N/A Light-Medium 8-20 (0.24-0.60) Siphon Feed Guns: Air Spray Gun Assemblies 239546 239592 0.055 (1.397) 10 (254) Light 4-10 (0.12-0.30) 239547 239593 0.070 (1.778) 10 (254) Light-Medium 8-12 (0.24-0.36) Gravity Feed Guns: Air Spray Gun Assemblies 239710 239592 0.055 (1.397) 9 (229) Light-Medium 4-10 (0.12-0.30) 239711 239593 0.070 (1.778) 9 (229) Light-Medium 8-12 (0.24-0.36) Air Spray Gun and Gravity Cup Assemblies 239555 0.055 (1.397) 9 (229) Light-Medium 4-10 (0.12-0.30) 239556 0.070 (1.778) 9 (229) Light-Medium 8-12 (0.24-0.36) Air Spray Gun and Siphon Cup Assemblies Product Information 239551 0.055 (1.397) 10 (254) Light 4-10 (0.12-0.30) 239552 0.070 (1.778) 10 (254) Light-Medium 8-12 (0.24-0.36) * Stainless steel needle/tip Measured with gun nozzle 10 in (254 mm) from target surface. Optional Air Caps Air Cap Pattern Width** Part No. In. (mm) Type 192313* Small, 12 (305) Air Spray 192316 Medium, 14 (356) Air Spray 196106*** Large, 17 (432) Air Spray 192314 Low fluid pressure applications Air Spray Medium, 14 (356) 196107 Shading/SAP, 6 (152) HVLP * Recommended for stains ** Measured with gun nozzle 10 in. (254 mm) from surface *** Brass material construction
Delta Spray, continued Delta Spray HVLP Spray Guns Gun Needle/ Orifice Pattern Material Usage: Assembly Nozzle Kit Size Width Viscosity Average Flow Part No. Part No. in (mm) in (mm) oz/min (lpm) Pressure Feed Guns: HVLP Spray Gun Assemblies 239559 239600 0.030 (0.762) 15 (381) Light 4-10 (0.12-0.30) 239560 239601 0.042 (1.067) 16 (406) Light-Medium 8-14 (0.24-0.42) 239561 239602 0.055 (1.397) 16 (406) Medium 12-18 (0.36-0.54) 239562 239603 0.070 (1.778) 17 (432) Medium-Heavy 16-20 (0.48-0.60) 239563 239604 0.086 (2.184) 17 (432) Heavy 18-22 (0.54-0.66) 239564 239605 0.110 (2.790) 18 (457) Heavy 20-24 (0.60-0.72) 239565* 239606* 0.042 (1.067) 16 (406) Light-Medium 8-14 (0.24-0.42) 239566* 239607* 0.055 (1.397) 16 (406) Medium 12-18 (0.36-0.54) 239567* 239598* 0.070 (1.778) 17 (432) Medium-Heavy 16-20 (0.48-0.60) Gravity Feed Guns: HVLP Spray Gun Assemblies 239574 239592 0.055 (1.397) 14 (356) Light-Medium 3-5 (0.09-0.15) 239575 239593 0.070 (1.778) 16 (406) Light-Medium 4-6 (0.12-0.18) HVLP Spray Gun and Pressure Cup Assemblies 239568 0.042 (1.067) 16 (406) Light 4-10 (0.12-0.30) 239569 0.055 (1.397) 16 (406) Light-Medium 6-12 (0.18-0.36) 239570 0.070 (1.778) 17 (432) Medium 8-14 (0.24-0.42) 239571 0.086 (2.184) 17 (432) Medium-Heavy 10-16 (0.30-0.48) HVLP Spray Gun and Gravity Cup Assemblies 239579 0.055 (1.397) 14 (356) Light-Medium 3-5 (0.09-0.15) 239580 0.070 (1.778) 16 (406) Light-Medium 4-6 (0.12-0.18) *Stainless steel needle/tip Measured with gun nozzle 10 in. (254 mm) from target surface. Accessories 239631 Air Whip Hose Assembly Length: 4 ft (1.22 m). ID: 5/16 in (7.94 mm). 239622 Fluid Whip Hose Assembly Length: 4 ft (1.22 m). ID: 3/16 in (4.76 mm). 243670 Air Control Valve Kit 239715 Gravity Cup Kit, 8 oz (237 cc) 239714 Gravity Cup Kit, 16 oz (474 cc) 239584 Air Spray Siphon Cup, 1 Pt (0.48 l) 239582 Air Spray Siphon Cup, 1 Qt (0.95 l) 196107 HVLP Shading/SAP Air Cap, 6 in (152 mm) Air Pressure Verification Kit Orifice Size in inches (mm) 239609 0.030, 0.042, 0.055 (0.762, 1.067, 1.397) 239610 0.070, 0.086 (1.778, 2.184) 239611 0.110 (2.790) 239612 Gravity 239802 SST Pressure Cup, 1 Qt (0.95 l), with Single Air Regulator and Pressure Relief Valve 239803 SST Pressure Cup, 1 Qt (0.95 l), with Double Air Regulator and Pressure Relief Valve 239804 Remote SST Pressure Cup, 1 Qt (0.95 l) with Air Regulator 239801 SST Pressure Cup, 1 Qt (0.95 l), Cup Only
Alpha Spray Guns Carbide models recommended for: pigmented, waterborne and higher viscosity materials. Composite models recommended for: acid-catalyzed materials and low viscosity lacquers and stains. Standard Alpha Spray Gun* 241508 Carbide Model Configured with carbide ball and seat. 241510 Composite Model Configured with composite ball and seat. HVLP Alpha Spray Gun* 241509 Carbide Model Configured with carbide ball, seat and HVLP air cap. 241511 Composite Model Configured with composite ball, seat and HVLP air cap. Accessories 241563 Alpha AA HVLP Air Cap Converts standard gun to HVLP compliancy. Requires HVLP verification kit. 241644 HVLP Verification Kit For use in checking air cap air pressures at various supply air pressures. *GGW spray tip of choice included with Alpha Gun. Alpha Plus Spray Guns 243573 Alpha Plus Spray Gun* 243574 Alpha Plus Hi-Flow Spray Gun* Recommended with tips larger than.025" and other high flow applications. 243575 Alpha Plus HVLP Spray Gun* Standard spray gun with HVLP compliant air cap. 243576 Alpha Plus Reverse-A-Clean (RAC) Spray Gun* Spray gun with AA Reverse-A- Clean assembly to reduce frequent tip plugging. Accessories 239898 Alpha Plus HVLP Air Cap Converts standard Alpha Plus users to HVLP compliancy. 243581 HVLP Verification Kit For use with 239898 air cap only, to determine air pressure behind the air cap. 243790 Reverse-A-Clean Conversion Kit Converts 243573 gun with standard spray tip, tip guard and air cap to 243576 RAC gun. 243577 Alpha Plus Reverse-A-Clean (RAC) Hi-Flow Spray Gun* Hi-Flow spray gun with Reverse-A- Clean assembly. *GG4xxx or 242xxx spray tip of choice included with Alpha Plus gun.
Silver plus Manual Gun 243283 Silver Plus with NanaTite Tip Guard and 517 RAC 5 SwitchTip, 2-Finger Trigger. 235464 Silver Plus with HD Guard Tip Includes GHD SwitchTip, 2-Finger Trigger. 238591 Silver Plus with HD Guard Tip Includes GHD SwitchTip, 4-Finger Trigger. 235460 Silver Plus with DripLess Flat Tip Guard, 2-Finger Trigger Spray tip not included, order separately. 238966 Silver Plus with HD Tip Guard, 2-Finger Trigger with 4-Finger Fluid Tube for improved gloved hand access. 235461 Silver Plus with DripLess Flat Tip Guard, 4-Finger Trigger. Spray tip not included, order separately. 235462 Silver Plus with DripLess Flat Tip Guard, 0.037 in. (0.94 mm) pre-orifice for fine finish. Spray tip not included, order separately. 235474 Silver Plus Gun Repair Kit 235475 Silver Plus Gun Repair Kit for model 235462 Model 510 236995 Model 510 Includes a Heavy-Duty 510 RAC 5 Tip Guard and size 619 SwitchTip. Accessories 237398 Needle and Seat Kit Repair Kit Fluid orifice size: 0.090 in. (2.3 mm). Comes standard with the Model 510 gun. Includes valve seat, gasket, needle, seal retainer and seal. 236987 Gun Hose Swivel Maximum working pressure: 7400 psi (51.0 MPa, 510 bar). 1/4 npsm(f) x 1/4 npt(m). 237260 Optional Non-Diffused Needle and Seat Conversion/Repair Kit Fluid orifice size: 1/8 in. (3.2 mm). Recommended only for use with mastics, sealers and other high viscosity materials which have fillers that cannot pass through the standard seat diffuser. 237162 HD RAC Tip Retainer Maximum working pressure: 7400 psi (51 MPa, 510 bar). Fits guns with 7/8 in. (22.2 mm) thread. Included as part of 236995 Model 510 gun.
Flex Plus 235458 Flex Plus Gun Includes Flat Tip DripLess Guard and 2-Finger Trigger. Spray tip not included. 243284 Flex Plus Gun Includes 517 RAC 5 SwitchTip, HandTite Tip Guard and 2-Finger Trigger. Accessories 243322 Flex Plus Gun Hose Kit Flex Plus Gun with 517 RAC 5 SwitchTip and HandTite tip guard, 3 ft. (0.9 m) whip hose, 1/4 in. (6.3 mm) x 50 ft. (15.2 m) airless hose. Contractor Gun 243282 Contractor Gun Includes 517 RAC 5 SwitchTip and HandTite tip guard. 179943 Optional 4-Finger Trigger For 243282 Contractor gun. Accessories Filters 218131 Gun Filter Assembly, 50 mesh 218133 Gun Filter Assembly, 100 mesh (149 micron) 224455 Gun Filter Screen Element, 50 mesh (300 micron) 224456 Gun Filter Screen Element, 100 mesh (149 micron) Tools 171147 Wrench Fits all hexes on the gun. Nylon Brushes Use to thoroughly clean the gun s fluid passages. 101891 3/8 in. (9 mm) diameter 101892 5/8 in. (16 mm) diameter Hoses and Swivels 224457 Gun Hose Swivel Maximum working pressure: 3600 psi (24.8 MPa, 248 bar). 1/4 npsm(f) x 1/4 npt(m). 243318 Contractor Gun Hose Kit Includes Gun, RAC 5 SwitchTip, HandTite tip guard, 1/4 in. x 50 ft. (6.3 mm x 15.2 m) BlueMax airless hose and 3 ft. (0.9 m) whip hose. 243320 Contractor Gun Hose Kit Includes gun, RAC 5 SwitchTip, HandTite tip guard, 3/8 in. x 50 ft. (9.5 mm x 15.2 m) airless hose and 3 ft. (0.9 m) whip hose. Tip Guards 220251 Flat Tip Guard 7/8"(f) for Standard Tip 220247 Flat Tip Guard 7/8" (f) for Fine Finish Tip 222674 Heavy-Duty RAC DripLess Tip Guard 239394 Filter/Swivel 243161 HandTite Tip Guard
PRO Xs Guns 244399 PRO Xs2 Gun includes 1.5 mm nozzle, 197477 air cap. Grounded air hose must be ordered separately. 244400 PRO Xs3 for Standard Coatings Gun includes 1.5 mm nozzle and 197477 air cap. 244579 PRO Xs3 Smart Gun for Standard Coatings Includes Smart Display showing voltage and current at the gun, adjustable voltage, 1.5 mm nozzle and 197477 air cap. 244575 PRO Xs3 High Conductivity Coatings Gun includes 1.5 mm nozzle and 197477 air cap. 244576 PRO Xs3 Smart Gun for High Conductivity Coatings Includes Smart Display showing voltage and current at the gun, adjustable voltage, 1.5 mm nozzle and 197477 air cap. 244581 PRO Xs3 for Waterborne Coatings Gun includes 1.5 mm nozzle and 197477 air cap. Waterborne fluid hose must be ordered separately (includes fluid tube and gun fittings). 244582 PRO Xs3 Smart Gun for Waterborne Coatings Includes Smart Display showing voltage and current at the gun, adjustable voltage, 1.5 mm nozzle and 197477 air cap. Waterborne fluid hose must be ordered separately (includes fluid tube and gun fittings). 245301 Waterborne PRO Xs3 Gun Kit PRO Xs3 gun with 7.6 m (25 ft.) waterborne fluid hose. 245305 Waterborne PRO Xs3 Gun Kit PRO Xs3 Smart gun with 7.6 m (25 ft.) water borne fluid hose. 244401 PRO Xs4, Standard Gun includes 1.5 mm nozzle and 197477 air cap. 244580 PRO Xs4, Smart Includes Smart Display showing voltage and current at the gun, adjustable voltage, 1.5 mm nozzle and 197477 air cap. 244572 PRO Xs4, Air-Assisted, Standard Includes tip of choice when ordering.
244573 PRO Xs4, Air-Assisted, Smart Includes Smart Display showing voltage and current at the gun, adjustable voltage and tip of choice when ordering. 244589 PRO Auto Xs for Standard Coatings Includes gun shroud, mounting bracket, gun manifold and gun with 1.5 mm fluid nozzle and 197477 air cap. 244590 PRO Auto Xs for High Conductivity Coatings Includes gun shroud, mounting bracket, gun manifold and gun with 1.5 mm fluid nozzle and 197477 air cap. 244591 PRO Auto Xs for Waterborne Coatings Includes gun shroud, mounting bracket, gun manifold and gun with 1.5 mm fluid nozzle and 197477 air cap. Waterborne fluid hose must be ordered separately (includes fluid tube and gun fittings). 244592 PRO Auto Xs AA Includes gun, shroud, mounting brackets, gun manifold and gun with tip of choice. Accessories for PRO Xs Guns (all types) Grounded Air Hoses (required for use) Length Air Flex Standard Waterborne* 1.8 m (6 ft.) 244963 223068 235068 4.6 m (15 ft.) 244964 223069 235069 7.6 m (25 ft.) 244965 223070 235070 11 m (36 ft.) 244966 223071 235071 15 m (50 ft.) 244967 223072 235072 23 m (75 ft.) 244968 223073 235073 30.5 m (100 ft.) 244969 223074 235074 244914 Gun Covers (box of 10) For PRO Xs2 gun. 244915 Gun Covers (set of 10) For PRO Xs3, PRO Xs4 and PRO Xs4 AA guns. 239945 Gun Covers (box of 10) For PRO Auto Xs guns. Select Comfort Grips Snap-on grips to increase the handle size to reduce operator fatigue. 245263 Medium Grip Kit 245264 Large Grip Kit 105749 Cleaning Brush
Accessories for Air Spray PRO Xs Guns Round Pattern Kits Consists of fluid tip, diffuser and air cap. 245217 102-152 mm (4-6 in.) diameter 245219 203-254 mm (8-10 in.) diameter Fluid Hose 215637 1/4 in. ID x 7.6 m (25 ft.) 215638 1/4 in. ID x 15.2 m (50 ft.) 245252 Waterborne Fluid Hose 7.6 m (25 ft.) fluid hose. Used only with PRO Xs3 waterborne guns. 244731 0.95 l (1 Quart) Remote Pressure Cup Includes air regulators for both gun atomization and supply air to the pressure cup. 244732 1.90 l (2 Quart) Remote Pressure Cup Includes air regulators for both gun atomization and supply air to the pressure cup. Accessories for Air-Assisted PRO Xs Guns 245282 PRO Xs4 AA Round Spray Kit (manual guns) Round spray provides a higher level of performance to electrostatic spraying. Includes tip of choice. 245298 PRO Auto Xs AA Round Spray Kit Round spray provides a higher level of performance to electrostatic spraying. Includes tip of choice. Part No. Pattern Flow Rate Width at 40 bar at 80 bar 236836 229 mm (9 in.) 120 cc/min. 170 cc/min. 236837 254 mm (10 in.) 150 cc/min. 220 cc/min. 236838 254 mm (10 in.) 160 cc/min. 230 cc/min. 236839 356 mm (14 in.) 230 cc/min. 330 cc/min. 236840 330 mm (13 in.) 270 cc/min. 420 cc/min. 236841 305 mm (12 in.) 350 cc/min. 530 cc/min. 236842 279 mm (11 in.) 480 cc/min. 700 cc/min. Fluid Hose 223540 1/4 in. ID x 7.6 m (25 ft.) 223541 1/4 in. ID x 15.2 m (50 ft.)
Air Spray Delta Auto Guns A manifold is required for each gun to be installed. Gun Needle/ Assembly Nozzle Kit Air Cap** Orifice Part No. Part No. Part No. Size in. (mm) 241737 241753 195309 0.030 (0.762) 241738 241754 195309 0.042 (1.067) 241739 241755 195309 0.055 (1.397) 241740 241756 195309 0.070 (1.778) N/A 241757 195311 0.086 (2.184) N/A 241758 195312 0.110 (2.790) 241743* 241759* 195309 0.042 (1.067) 241744* 241760* 195309 0.055 (1.397) Pattern Material Usage Length*** Viscosity Average Flow in. (mm) oz./min. (lpm) 15 (381) Light 4-12 (0.12-0.36) 17 (432) Light-Medium 8-20 (.024-0.60) 17 (432) Medium 16-30 (0.48-0.90) 18 (457) Medium-Heavy 16-35 (0.48-1.05) 13 (330) Heavy 16-40 (.48-1.20) 11 (279) Heavy 16-45 (.48-1.35) 17 (432) Light-Medium 8-20 (0.24-0.60) 17 (432) Medium 8-20 (0.48-0.90) *Stainless steel needle tip **Large pattern air caps can be replaced with optional air caps for alternate spray patterns. *** Measured with gun nozzle 10 in. (254 mm) from target surface Manifolds A manifold is required for each gun to be installed. 241696 Manifold with bottom fluid ports 241697 Manifold with side fluid ports 243950 Manifold with manual fan control with side fluid ports
HVLP Delta Auto Guns A manifold is required for each gun to be installed. Gun Needle/ Assembly Nozzle Kit Air Cap** Orifice Part No. Part No. Part No. Size in. (mm) 241745 241769 195304 0.030 (0.762) 241746 241770 195304 0.042 (1.067) 241747 241771 195304 0.055 (1.397) 241748 241772 195305 0.070 (1.778) N/A 241773 195305 0.086 (2.184) N/A 241774 195306 0.110 (2.790) 241751* 241775* 195304 0.042 (1.067) 241752* 241776* 195304 0.055 (1.397) Pattern Material Usage Length Viscosity Average Flow in. (mm) in. (mm) oz./min. (lpm) 15 (381) Light 4-10 (0.12-0.30) 17 (432) Light-Medium 8-14 (0.24-0.42) 17 (432) Medium 12-18 (0.36-0.54) 18 (457) Medium-Heavy16-20 (0.48-0.60) 17 (432) Heavy 18-22 (0.54-0.66) 18 (457) Heavy 20-24 (0.60-0.72) 17 (432) Light-Medium 8-14 (0.24-0.42) 17 (432) Medium 12-18 (0.36-0.54) * Stainless steel needle tip ** Large pattern air caps can be replaced with optional air caps for alternate spray patterns. *** Measured with gun nozzle 10 in. (254 mm) from target surface Manifolds A manifold is required for each gun to be installed. 241696 Manifold with bottom fluid ports 241697 Manifold with side fluid ports 243950 Manifold with manual fan control with side fluid ports
AA Plus Automatic Guns A manifold is required for each gun to be installed. All models include an internal filter. 239780 Standard Gun Includes standard needle with 3.1 mm carbide ball (239794) and standard diffuser seat (224855), standard air cap (239781) and GG5 tip. 239787 Acid Catalyst Gun Specially designed to handle low viscosity and/or acid-catalyzed materials. Includes a needle with 3.1 mm plastic ball (239808) and standard diffuser seat (224855), standard air cap (239781) and GG5 tip. 239788 HVLP Gun Includes standard needle (239794) and standard seat (224855), HVLP air cap (239898), and GG5 tip. 239784 Hi-Flow Spray Gun Includes needle with 4.7 mm carbide ball (239807), seat (239806). Air cap and tip not included. 241088 AA Reverse-A-Clean (RAC) Gun Includes standard needle (239794) with the AA RAC diffuser seat (239173), AA RAC air cap (238701) 242 tip. Manifolds A manifold is required for each gun to be installed. 239891 Standard 1/4-18 npsm inlets 240214 European #5 JIC inlets 243952 Manifold with manual fan control 1/4-18 npsm inlets Airless Auto Gun Includes GGO precision spray tip of choice. 239786 Airless Gun Manifolds A manifold is required for each gun to be installed. 241161 Standard 1/4-18 npsm inlets 241162 European #5 JIC inlets Accessories 241480 Air Seal Repair Kit 239896 Fluid Seal Repair Kit 240948 Filter Kit 10 internal filters (193413) Triggering Speed Cylinder Fluid Air Pressure Pressure msec msec psi (MPa, bar) psi (MPa, bar) to fully open to fully close 70 (0.49, 4.9) 600 (4.2, 42) 51 72 70 (0.49, 4.9) 1800 (12.4, 124) 56 73 70 (0.49, 4.9) 4000 (28, 280) 69 73
Product Literature Part Number Description Available Languages 305873 DELTA Spray Guns, Airspray and HVLP E/F/G/I/S/H/U/D 305988 ALPHA AA Gun E/F/G/I/S/H/U/D/B/N 305992 ALPHA PLUS AA Gun E/F/G/I/S/U 305793 SILVER PLUS Gun E 300578 PRO Xs Electrostatic Guns E/F/G/I/S/H/U/B 308813 Auto Airless Gun Manual E/F/G 308780 AA Auto Gun Manual E/F/G 305998 HVLP/Air Spray Delta Auto Guns E/F/G 309091 Contractor Gun Manual E/F/G 308438 Airless Gun 510 Manual E/F/G 309093 Flex Airless Gun Manual E/F/G E = English F = French G = German I = Italian S = Spanish H = Dutch U = Swedish B = Finnish D = Danish N = Norwegian The Product Information included in this document is only a selection of the Graco Finishing Product Range. Contact your local distributor for more detailed information. 2002 Graco Inc. Form No. 300-610 E Rev.A 10/02 Printed in Europe. All data in this document is based on the latest product information available at the time of publication. Graco reserves the right to make changes at any time without notice. Graco N.V. - Industrieterrein Oude Bunders - Slakweidestraat 31 B-3630 Maasmechelen Tel: +32 (89) 770 700 - Fax: +32 (89) 770 777 - E-mail: info@graco.be - Http//: www.graco.be