WINTER & SUMMER COLLECTION 2017/18 US TURN US 10-3200-184 BD Catalog Winter / Summer 17/18. Foto: WINTERSTEIGER. Copyright WINTERSTEIGER AG.
INTRODUCTION HEATING AND DRYING SYSTEMS FOR SHOES, BOOTS AND GLOVES HOTRONIC designs and creates comfort and warmth solutions for active feet. What sets HOTRONIC apart is its offering of high quality components built upon the latest in technology to meet the needs of the individual user. Our goal is keeping feet warmer. Longer! See also our BOOTDOC products to tune your feet on the other side of this catalogue. hotronic.com
3 Foot Warmer 4 Product Information 5 Foot Warmer S Series 6 Heat Socks 8 Product Information 9 Heat Socks XLP 10 Boot & Glove Dryer 12 S SERIES XLP SERIES SNAPDRY
FOOT WARMER S SERIES FOOT WARMER HOTRONIC s S Series Foot Warmers are the culmination of years of experience in research, development, and testing. With enhanced reliability and longevity, the S Series Foot Warmers maintain their focus on ensuring one s comfort and warmth during the coldest of conditions! SET FOR COMFORT & WARMTH FOOT WARMER POWER PLUS S4 TEMPERATURE & DURATION CHART The HOTRONIC FootWarmer S4 offers three base level settings for comfort and warmth maintenance. A fourth setting offers an extra blast of heat when needed. Press-hold-and-release the Battery Pack s ON or OFF button to select each setting. Easy to read LED lights indicate the setting selected and when the power is on or off.
5 S SERIES PRODUCT INFORMATION POWERFUL LONGEVITY HOTRONIC s S Series Footwarmers offer more than ever before. With enhanced reliability and longevity, the S Series NiMH batteries maintain up to 55 % of a full charge and 95 % of their initial capacity after four years of non-use! Plus, an increase in capacity offers up to a combined 30 % in higher average temperatures and longer durations on a single full charge, all when needed most, in the cold!!! S SERIES XLP SERIES SNAPDRY A SMARTER WAY TO RECHARGE Wherever one goes worldwide, HOTRONIC s advanced global charging technology senses when the batteries are charged and protects them from overcharging damage by switching to trickle current recharging. Compatible with all S, e, and m Series Battery Packs, the Recharger s LEDs indicate recharging mode and battery charge status. AN ELEMENT OF HEAT By blocking and neutralizing the penetrating cold, HOTRONIC s Heating Element keeps the blood circulation open while maintaining comfort and warmth in the feet. The Heating Element s large oval shape and self-adhesive backing provide effective anatomical coverage of the toes and easily installs in HOTRONIC s Heat Ready Insoles or on insoles of one s own choice.
FOOT WARMER FOOT WARMER S SERIES FOOT WARMER POWER PLUS UNIVERSAL S4 01-0100-1031 01-0100-1033 FOOT WARMER POWER PLUS CUSTOM S4 The Foot Warmer Power Plus UNIVERSAL comes with 2 Battery Packs, 1 Recharger, 1 pair of Heating Elements with Cambrelle Covers, and 1 pair of One Size Fits All - Heat Ready Insoles. For installation in the included One Size Fits All - Heat Ready Insoles or on custom insoles, orthotics, or insoles of one s own choice. The Foot Warmer Power Plus CUSTOM comes with 2 Battery Packs, 1 Recharger, and 1 pair of Heating Elements with Cambrelle Covers. For use in HOTRONIC s Heat Ready Insoles or on custom insoles, orthotics, or insoles of one s own choice. FOOT WARMER POWER SET S4 01-0100-1071 The Foot Warmer Power Plus POWER SET comes with 2 Battery Packs and 1 Recharger. For use with HOTRONIC s pre-wired BD Anatomic Insoles or with Heating Elements installed in HOTRONIC s Heat Ready Insoles, or on custom insoles, orthotics, or insoles of one s own choice. COMPONENTS & ACCESSORIES BATTERY PACK POWER PLUS S4 01-0100-1133 Includes 1 Battery Pack Power Plus S4. Additional Battery Packs extend total warming duration throughout extremely cold days. RECHARGER S/E/M SERIES 100 V 240 V 01-0100-1161 Includes 1 Recharger Power Plus S/e/m. Recharges Power Plus S/e/m Series Battery Packs globally in 100V to 240V destinations. Includes North American and European plug adapters. HEATING ELEMENTS WITH CAMBRELLE COVERS AND STRIPS 01-0100-1220 Includes 1 pair of Heating Elements and Cambrelle Covers and Strips. For installation in HOTRONIC s Heat Ready Insoles or on custom insoles, orthotics, or insoles of one s own choice. HEATING ELEMENTS 01-0100-1229 Includes 1 pair of Heating Elements. For installation in HOTRONIC s Heat Ready Insoles or on custom insoles, orthotics, or insoles of one s own choice. CAMBRELLE COVERS AND STRIPS 01-0100-1240 Includes 1 pair of Cambrelle Covers and Strips for application on HOTRONIC s Heat Ready Insoles or on insoles of one s own choice. ONE SIZE FITS ALL HEAT READY INSOLES 01-0100-1301 Includes 1 pair of One Size Fits All - Heat Ready Insoles for simple, quick installation of Heating Elements. Size 32.0 metric, trim-to-size.
7 SEMI CUSTOM HEAT READY INSOLES 23.0/24.5 01-0100-1324 25.0/26.5 01-0100-1326 27.0/28.5 01-0100-1328 29.0/30.5 01-0100-1330 Includes 1 pair of anatomically shaped Insoles ready for simple, quick installation of Heating Elements. BD ANATOMIC INSOLES S 23.0/24.5 01-0100-1344 M 25.0/26.5 01-0100-1345 L 27.0/28.5 01-0100-1346 XL 29.0/30.5 01-0100-1347 XXL 31.0/32.5 01-0100-1348 Includes 1 pair of heat moldable, anatomically shaped, trim to size Insoles with HOTRONIC s Heating Elements already installed. MOUNTING BRACKETS STRAP BRACKETS 01-0100-1500 01-0100-1503 Includes 2 Mounting Brackets with attachment hardware. For a simple, secure, quick attachment of Battery Packs to ski or hard shell snowboard boots. A non-electrical, non-mechanical system requiring a single drilled hole. Includes 2 Strap Brackets and 2 Wire Form Clips. For a simple, secure, quick attachment of Battery Packs to power straps. Position Battery Packs above and out of the way of top boot buckles. S SERIES XLP SERIES SNAPDRY SLIDE STRAP BRACKETS (S/E/M SERIES ONLY) 01-0100-1505 Includes 2 Slide Strap Brackets and 2 Wire Form Clips. Battery Packs slide down over Brackets and snap into place for a simple, secure, quick, and closefitting attachment of Battery Packs to power straps. Position Battery Packs above and out of the way of top boot buckles. EXTENSION CORDS: 20, 80 AND 120 CM 20 CM 01-0100-1517 80 CM 01-0100-1520 120 CM 01-0100-1530 Includes 1 pair of Extension Cords 20, 80, or 120 CM for attachment of Battery Packs at waist or chest height. VELCRO ATTACHMENT STRAPS 01-0100-1510 Includes 1 pair of Velcro Attachment Straps to secure Battery Packs around leg or top of outdoor footwear or use as power straps on ski or snowboard boots. BATTERY PACK WIRE FORM CLIP KIT 01-0100-1590 Includes 1 pair of Wire Form Clips and Plastic Locking Plates for use as needed. INFRARED THERMOMETER (EA) 01-0100-1605 For use in testing/confirming generation of heat in Heating Element. Also for use in demonstrating heat to customers. FOOT WARMER POP DISPLAY (EA) 01-0100-1700 The Foot Warmer POP Display is an excellent silent sales representative, offering a hands-on, Feel the Heat experience. Works on counter top, slat wall, and grid wall. Includes integrated brochure holder.
HEAT SOCKS XLP SERIES HEAT SOCKS HOTRONIC offers heating systems while BOOTDOC offers Power Fits Socks as the sister product. Now the two brands have merged to create a single product in the new HEAT SOCKS. The integrated heating element is powered by high-performance lithium-ion rechargeable batteries, and the controls for the four heating levels are on the battery pack itself. SET FOR COMFORT & WARMTH HEAT SOCKS XLP ONE TEMPERATURE & DURATION CHART HOTRONIC S Battery Pack XLP ONE provides three (3) Constant Heating Power Settings for comfort and warmth maintenance. A fourth Boost Setting 4 offers an extra blast of heat when needed and is timed to reset to Setting 3 in three (3) minutes. Press-hold-and-release the Power Button to select the desired Setting. Easy to read LED lights indicate the Setting selected and when power is on or off.
9 XLP SERIES PRODUCT INFORMATION FITTING PERFORMANCE HOTRONIC s Heat Socks XLP ONE begin with BOOTDOC s Power Fit Socks created in a wool blend with a soft, gradual pressure distribution to enhance comfort and warmth in a performance fit. SINGULARLY POWERFUL LOW LOW MIDDLE MIDDLE HIGH HIGH S SERIES XLP SERIES SNAPDRY HOTRONIC s new Battery Pack XLP ONE is powered by a single lithium-ion battery. With more raw power in ONE battery than any other complete Battery Pack in HOTRONIC s collection, the XLP ONE delivers the heat and duration needed when used with HOTRONIC s Heat Socks XLP! And, with HOTRONIC s focus on reliability and longevity, the XLP ONE maintains up to 90 % of a full charge and 90 % of its initial capacity after two years of non-use! All with ONE purpose in mind. Keeping feet warmer. Longer. ERGONOMICALLY DELIVERED HEAT HOTRONIC s Heating Element starts within the Sock s double cuff which securely holds the Battery Pack in place. Ergonomically attached to the outside of the Sock for added comfort, the Element then positions along the lower leg, wraps around the Achille s and under the arch, and ultimately delivers heat to the toes and ball of foot. Simply pull the Socks on, align the upper cuff with the BOOTDOC logo in front, position the Heating Element underneath the toes and ball of foot, and connect the charged Battery Pack. Ready for added comfort and warmth! RECHARGING SIMPLE SMART Wherever one goes worldwide, simply connect the Battery Pack XLP ONE to the Recharger XLP and the current charge level is indicated on the Battery Pack within seconds. As recharging continues, the Battery Pack LED lights indicate when the charge level reaches 25 %, 50 %, 75 %, and a full charge at 100 %. CONSTANT HEATING POWER HOTRONIC s electronic design provides Constant Heating Power from the Battery Pack to the Heating Element throughout the heating duration. In conventional designs, power output drops when the charge level drops. HOTRONIC optimizes the heating power for the best possible experience from start to finish. XLP CONSTANT HEATING POWER CHART ( C) CONSTANT HEATING POWER NO CONSTANT HEATING POWER (h)
HEAT SOCKS HEAT SOCKS XLP HEAT SOCKS XLP ONE PFI 50 SET CLASSIC 01-0100-306-x Size: S XL The Heat Socks XLP ONE PFI 50 SET CLASSIC consists of 2 powerful Lithium-Ion Battery Packs, 1 pair of BOOTDOC s Power Fit Socks integrated with HOTRONIC s heating elements, and 1 Recharger. Material and care: 70 % nylon, 20 % spandex, 10 % merino wool, machine wash warm, air dry Ideal moisture transportation Added shin protection PFI 50 Soft, compression rating of 10 15 mmhg COMPONENTS & ACCESSORIES HEAT SOCKS XLP PFI 50 CLASSIC 01-0100-332-x Size: S XL The Heat Socks XLP PFI 50 CLASSIC consists of 1 pair of BOOTDOC s Power Fit Socks integrated with HOTRONIC s heating elements. Material and care: 70 % nylon, 20 % spandex, 10 % merino wool, machine wash warm, air dry Ideal moisture transportation Added shin protection PFI 50 Soft, compression rating of 10 15 mmhg HEAT SOCKS XLP PFI 50 PEARL GREEN 01-0100-344-x Size: S L The Heat Socks XLP PFI 50 PEARL GREEN consists of 1 pair of BOOTDOC s Power Fit Socks integrated with HOTRONIC s heating elements. Material and care: 50 % nylon, 25 % spandex, 25 % CHERthermo wool, machine wash warm, air dry Ideal moisture transportation Added shin protection PFI 50 Soft, compression rating of 10 15 mmhg HEAT SOCKS XLP PFI 30 CAMO 01-0100-343-x Size: S XL 30 The Heat Socks XLP PFI 30 CAMO consists of 1 pair of BOOTDOC s Power Fit Socks integrated with HOTRONIC s heating elements. Material and care: 45 % nylon, 25 % spandex, 30 % Coolmax, machine wash warm, air dry Ideal moisture transportation PFI 30 Gentle, compression rating of 5 10 mmhg The Power Fit Index (PFI) indicates the overall level of gradual pressure distribution woven into each pair of BOOTDOC s Power Fit Socks. PFI 30 designates a gentle pressure distribution while PFI 90 classifies as strong and is therefore only found in BOOTDOC s performance series.
11 COMPONENTS & ACCESSORIES XLP ONE POWER SET 01-0100-3186 The XLP ONE POWER SET consists of 2 powerful Lithium-Ion Battery Packs and 1 Recharger. For use with Heat Socks XLP consisting of BOOTDOC s Power Fit Socks integrated with HOTRONIC s heating elements BATTERY PACK XLP ONE 01-0100-3306 Includes 1 Battery Pack XLP ONE for use with Heat Socks XLP consisting of BOOTDOC s Power Fit Socks integrated with HOTRONIC s heating elements. EXTENSION CORDS XLP 120 CM 01-0100-3397 RECHARGER XLP 01-0100-3308 Includes 1 Recharger XLP with North American and European plug adaptors for use with Battery Packs XLP ONE. BD POWER FIT SOCKS PFI 50 01-0100-342-x Size: S XL S SERIES XLP SERIES SNAPDRY Includes 1 pair of Extension Cords 120 CM for attachment of Battery Packs at waist or chest height. Includes 1 pair of BD Power Fit Socks created in a wool blend and soft gradual pressure distribution to enhance one s comfort and warmth. MARKETING BD/HOTRONIC FLOOR DISPLAY 10-3100-323 Size: 66 x 66 x 160 cm HOTRONIC WALL DISPLAY 10-3100-338 Size: 50 x 40 x 160 cm SLATWALL HOOKS UNIVERSAL 10-3100-324 Length: 30 cm SLATWALL HOOKS HOTRONIC 10-3100-325 Length: 30 cm HOTRONIC MAGNET SIGN FOR FLOOR DISPLAY 10-3100-330 Size: 62 x 18 cm EXAMPLARY PHOTOS HOTRONIC CARPET 10-3100-336 Size: 75 x 120 cm SLATWALL BOARD 10-3100-342 Size: 31 x 29 x 6 cm HEAT SOCKS DISPLAY 10-3100-334 1 pcs. Size: W 30 x H 58,5 x D 28 cm Includes snap fastener, cords and plugs, sock and foot model for sock Fits for any slatwall or BD/HOTRONIC floor display only
SNAPDRY SNAPDRY BOOT & GLOVE DRYER HOTRONIC s Snapdry Boot & Glove Dryer offers quick, quiet, drying and pre-warming of hand and footwear. Designed with the strength of its patented Quick Clip system and a long lasting motor, the Snapdry Boot & Glove Dryer also travels well, wherever one goes, worldwide. SNAPDRY Quiet and strong Built in timer Drying and pre-warming Travels well, fits in every suitcase
BOOT & GLOVE DRYER 13 SNAPDRY HOTRONIC S SNAPDRY SYSTEM Quiet and timely. Snapdry s quiet, long lasting motor maximizes the Dryer s use at any time, any season, day or night. Plus, the built in timer provides up to a maximum of 24 hours drying time. Travels well. With a dual voltage selector switch (120V/230V), the dryer also packs conveniently inside one s boots or the included storage bag. S SERIES XLP SERIES SNAPDRY Dries and pre-warms. Dries within one to five hours. Pre-warms in 30 to 60 minutes keeping hands and feet warmer longer by enhancing circulation. Quick and strong. The Quick Clip system holds hand and footwear upright and together while strengthening and protecting the upper air deflector. Healthy hands and feet. Utilizing the integrated hand wear stand, Snapdry s Boot & Glove Dryer dries hand and footwear separately to minimize potential transfer of bacteria and fungi between hand and footwear. SNAPDRY BOOT & GLOVE DRYER (120V PLUG) (EA) 01-0100-5201 Includes blower assembly, air manifold assembly with flexible air tubes, right angle extensions for tall footwear, straight extensions for hand wear and low cut footwear, integrated hand wear stand, and nylon storage bag. SNAPDRY POP DISPLAY (EA) 01-0100-5700 The Snapdry POP Display is an excellent silent sales representative. Works on counter top, slat wall, and grid wall. Includes integrated brochure holder.