Front Disc Brakes - Drag Race

Similar documents
Front Disc Brakes - Street. CLICK for More Info Online. Forged Aluminum Four-Piston Caliper with Vented Rotor and Billet Aluminum Hub

DYNALITE PRO SERIES FRONT HUB KITS

Rear Disc Brake Kit. CLICK for More Info Online. Vented Disc with Parking Brake and Forged- Aluminum Four-Piston Calipers

PERFORMANCE CLUTCHES & FLYWHEELS 2007 CATALOG

PERFORMANCE CLUTCHES & FLYWHEELS 2008 CATALOG

Suspension Measurements

CLICK for More Info Online

Dominator Series Direct Fit. Are You Happy With Your Cooling System?

8 M M C U s t o m f i t m a g X 2 s P a R K p l u g w i r e s

Plug Boot. Dist Boot. Black Part No. Red. Blue. Dist. Cap Type. 62

Total Cost Involved Engineering General Tech Info and Downloads: TCI Engineering - General Tech Info:

CLICK for More Info Online

HELLWIG SWAY BAR. SWAY BARS FOR TRUCKS & SUVs SWAY BAR APPLICATION TABLE THE BENEFITS OF A. Improve Handling & Performance

Hot Rod Front Disc Brake Kits

CLICK for More Info Online

Volume 4. Application Guide. Horsepower for your Suspension

2014 AC Auction Results

Oct AC Auction Results

2011 APPLICATION GUIDE EFFECTIVE JANUARY 1, 2011

PRODUCT CATALOG

HOSE AND FITTING INDEX

ASSEMBLY INSTRUCTIONS

SCOTTSDALE 2016 STILL FOR SALE LIST

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS FOR DYNALITE PRO SERIES REAR PARKING BRAKE KIT WITH DIAMETER SOLID ROTOR (2.81 OFFSET) OLDS / PONTIAC

Camaro Frame System. g-machine Front Subframe, Frame Connector and g-bar Rear Suspension System for Camaro/Firebird

INSTALLATION GUIDE TCP SPND MUSTANG SPINDLES WITH GRANADA OUTER TIE-ROD TAPER

GENERAL MOTORS PROVING GROUND RECORDS, Accession 1758

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS FOR

ASSEMBLY INSTRUCTIONS FOR SUPERLITE 6 BIG BRAKE FRONT CHALLENGE SERIES BRAKE KIT WITH HUB AND DIAMETER VENTED ROTOR

SUPER COMP & COMP HEADERS

ASSEMBLY INSTRUCTIONS

UPDATED APPLICATION COVERAGE

DISC BRAKES SHOULD ONLY BE INSTALLED BY SOMEONE EXPERIENCED AND COMPETENT IN THE INSTALLATION AND MAINTENANCE OF DISC BRAKES READ ALL WARNINGS

ASSEMBLY INSTRUCTIONS FOR DYNALITE PRO SERIES REAR PARKING BRAKE KIT WITH DIAMETER VENTED ROTOR (2.36 OFFSET) BIG BEARING FORD

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS FOR DYNALITE PRO SERIES REAR PARKING BRAKE KIT WITH DIAMETER VENTED ROTOR (2.75 OFFSET) CAMARO / FIREBIRD

VEHICLE APPLICATION CHART

Mecum Auctions - Anaheim California Car Price Auction Results

Chevrolet Nova Radiators

SUPER COMP & COMP HEADERS 4-37 EXHAUST SYSTEMS 38-40,47 MUFFLERS 41-46,48,51-53 EXHAUST TIPS 49,50 28,29,53-60, PAGES PAGES

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

ASSEMBLY INSTRUCTIONS

Performance Products. Ring And Pinion Sets EXTREME TRACTION SYSTEMS. Ring & Pinion. Transmissions Installation Kits

LIMITED SLIP DIFFERENTIAL

New EFI Ready Tank Kit

Lot Number Title/Description Sold Price Cndtn Code 1 hubcaps 275 1k 1959 Chevrolet Belair 2dr Sedan l 1964 Chevrolet Impala 2dr HT

Assembly Guide for Plastic Mounting Kits for Ford, GM and Mopar Vehicles

ASSEMBLY INSTRUCTIONS

CARLISLE EVENTS. Thursday, April 19, 2018 Call or visit us online to register your car / carlisleauctions.com

CGJ/Brice Thomas Radiator Quick Reference Guide by Part No. Chevrolet / GM Year Model PART # APPLICATION/DESCRIPTION

ASSEMBLY INSTRUCTIONS FOR DYNALITE DRAG RACE FRONT HUB KIT WITH DIAMETER SOLID ROTOR PINTO / MUSTANG II

Jagaur XJ6 $7, $6, FALSE BMW 325i Conv. $4, $3, FALSE Corvette 2 DR. $16, $10, FALSE

MAX LOCK LOCKER. aftermarket.auburngear.com Toyota 8 7/8" 10 Bolt (Fits Open OEM Carrier) Toyota 7.5" IFS. Toyota 8.

CLICK for More Info Online

ASSEMBLY INSTRUCTIONS FOR DYNALITE PRO SERIES FRONT HUB KIT WITH DIAMETER VENTED ROTOR FORD MUSTANG (DRUM / DISC SPINDLE)

jegs.com. Installation Instructions for /2 Muscle Car Header Dual Kits

AMM Charger R/T AMM AMX Hurst S/S Dodge Monaco Chicago Police AMM Camaro SS350. Car & Driver Magazine

HIGH PERFORMANCE URETHANE CATALOG SUSPENSION TRANS MOUNTS MOTOR MOUNTS CHASSIS FOR ALL CARS AND TRUCKS

Gulf Coast Classic in Punta Gorda, FL March 17 & 18, 2017 Results

STEERING GEAR SEAL KITS GEAR COMPLETE LOWER INPUT MAKE / MODEL SEAL KIT SECTOR KIT SECTOR KIT SHAFT KIT

82-92 CAMARO, FIREBIRD/78-87 REGAL, MONTE CARLO, GRAND PRIX/ S-10 RACE/STREET 4-PISTON FRONT BRAKE KIT INSTRUCTIONS

Early Birds Your GM Muscle Car Headquarters

ASSEMBLY INSTRUCTIONS FOR SUPERLITE 6R PRO SERIES FRONT HUB KIT WITH DIAMETER VENTED ROTOR GENERAL MOTORS G BODY DISC SPINDLE

ASSEMBLY INSTRUCTIONS FOR DYNALITE PRO SERIES FRONT HUB KIT WITH DIAMETER VENTED ROTOR EARLY FORD - DRUM SPINDLE

Rhinyl Products Convertible Tops

ASSEMBLY INSTRUCTIONS FOR DYNALITE BIG BRAKE FRONT HUB KIT WITH DIAMETER VENTED ROTOR CAMARO/FIREBIRD (DISC SPINDLE)

Drum 2 disk brake conversion. Stop That Car!

INSTALLATION GUIDE 5824-A10

FLORIDA AUCTION RESULTS 2014 LOT# COND YEAR MAKE MODEL BODY STYLE COLOR NO SALE SALE PRICE

Mid-American Hard Body Stock Car Series Rules Updated March Effective May 2016.

IRS Racing Brake Kit (MMBAK-15, -16)

MAIL-IN REBATE. Name: Address: City: State: ZIP: Phone: ST Suspensions Part Number:

2018 AUCTION VEHICLE RESULTS LOT YEAR MAKE MODEL TOTAL PRICE

1971 Ford Torino Cobra AMM Chevy Impala SS AMM Chrysler 300C Popular Mechanics Mag AMM Chevrolet Camaro AMM 1014

ASSEMBLY INSTRUCTIONS FOR

ASSEMBLY INSTRUCTIONS

Seatbelt Solutions

PERFORMANCE T RANSMISSION C ONTROLS & ACCESSORIES

Bolt-On Front VariShock Air-Spring Conversion

CO 1971, 35 # USA FAX:

VHX Series HDX Series

PART NUMBER GROUP

Six Keys to a Successful Rack and Pinion Conversion

ASSEMBLY INSTRUCTIONS FOR WILWOOD D154 PRO SERIES REAR PARKING BRAKE KIT WITH DIAMETER VENTED ROTOR (2.42 OFFSET) C-10 CHEVY, 5 LUG


FORD CROSSMEMBER ACCESSORIES

ASSEMBLY INSTRUCTIONS FOR REAR AXLE DISC / DRUM INTERNAL PARKING BRAKE KIT WITH DIAMETER VENTED ROTOR (2.66 OFFSET) MUSTANG, PRESENT

(1/25) (1/25) 8.50$ RKD23: 1999 Pontiac Firebird Trans Am 30 th Anniversary(1/25)(1/24) MOPAR Air Cleaner Decals( 60-67) 12.50$

SUSPENSION/STEERING/BRAKES/REAR AXLE

ASSEMBLY INSTRUCTIONS FOR DYNAPRO LOW-PROFILE PRO SERIES REAR PARKING BRAKE KIT WITH DIAMETER VENTED ROTOR (2.

MODULAR 9 FLOATER HOUSINGS

INSTALLATION INSTRUCTIONS FOR PART APPLICATIONS

ASSEMBLY INSTRUCTIONS FOR DYNALITE DRAG RACE REAR AXLE KIT

INSTALLATION INSTRUCTIONS FOR PART APPLICATIONS

ASSEMBLY INSTRUCTIONS FOR MUSTANG 8.8 (5 LUG)* DYNALITE REAR AXLE KIT WITH DIAMETER VENTED ROTOR (2.50 OFFSET) BASE PART NUMBER B

New! RSF-1 Forged 1-Piece

1967 Mustang GT 2+2 Golden Anniversary AMM Chevy Chevelle SS Conv t 396 AMM Pontiac GTO Judge AMM 1059

Transcription:

CLICK for More Info Online Drag Race Solid with Forged Aluminum Four-Piston Caliper and Billet Aluminum Hub Drilled rotor shown Available with smooth surface, non-drilled rotors Front Disc Brakes - Drag Race Our front drag race application disc brake kits feature fixed, four-piston, forged aluminum calipers and lightweight, 10-3/4 x.35 solid or drilled, black oxide finish rotors* with billet aluminum hats and hubs. The bolt together hat, hub, rotor assembly allows worn or damaged components to be replaced easily and economically. Our enhanced friction ceramic formula brake pads provide smooth engagement with consistent response from a flat torque curve throughout its entire effective temperature range. The kit is designed for use with OEM spindles and requires 14 or larger wheels *. Performance applications should be limited to drag race vehicles under 2,800 lbs. A parachute is also required on any vehicle exceeding 150 mph. * - Kits WW 140-4307 and WW 140-4307-D packaged with 11-3/4 x.35 rotors and require 15 or larger wheels. 1

Forged Dynalite Caliper Wilwood s Forged Dynalite (FDL) four-piston, aluminum, lug mount caliper is used for its superior rigidity, enhanced braking performance and pedal feel. The calipers use a closed end, internal fluid passage design that is further strengthened by four steel bridge bolts extending through the caliper body. Stress flow forging and smooth surface transitions help to eliminate stress points and reduce overall caliper deflection. Optional red powdercoated caliper FDL calipers use one-piece, 1.75 diameter, stainless steel pistons and high temperature, square faced bore seals. Stainless steel slows heat transfer to the brake fluid and improves the systems resistance to heat induced pedal fade. This reduction in heat also increases the service life of the fluid and seals. The four individual pistons apply pressure against both sides of the rotor. Caliper fluid requirements are matched to the output capabilities of commonly used factory master cylinders ensuring comfortable performance in a wide range of applications. The Dynalite calipers are trouble-free and service friendly. Vibration dampening stainless steel bridge plate inserts protect the caliper body from wear caused by pad movement, greatly extending service life. Two-piece bleed screws are easily accessed at each corner of the caliper body and eliminate direct wear to the aluminum body. Brake pads are also easily changed by simply removing the retaining pin and sliding the pads out. Lightweight Performance s The kit comes standard with black oxide coated, solid rotors, constructed from special alloy steel for its high thermal stability and resistance to distortion. These lightweight performance rotors are designed specifically for drag racing applications under 2,800 pounds. s measure 10.75 or 11.75 x.35 and weigh in at a mere 5.9 lbs or less. For more eye-catching performance and reduced weight, rotors can be upgraded to a drilled version. Billet Aluminum Hat and Hub Separate billet aluminum hats and hubs reduce unnecessary weight and allow components to be easily replaced if damaged or worn. Hats use a solid wall, concave design to improve rotor stability. Their clear anodized finish prevents oxidation and resists scratching. s and hats are secured by grade 8, safety wire drilled, hex bolts in an 8-bolt configuration. Hubs are silver anodized, machine finished with matching screw-on cap with O-ring seal. Assemblies include both 4-1/2 and 4-3/4 five lug bolt patterns with 1/2 x 3 wheel studs. Wheel bearings and seals also included. 2

Exploded Diagram WW 140-4307 shown in illustration Applications Solid Drilled Buick Apollo 1973-1974 - Disc/Drum 10.75 WW 140-1017 WW 140-1017-D Apollo 1975-1975 3 Disc 10.75 WW 140-1019 WW 140-1019-D RWD w/11 1979-1985 - Disc 10.75 WW 140-8175 WW 140-8175-D Grand National, Late 1979-1987 3, 5 Disc 10.75 WW 140-1033 WW 140-1033-D Century 1973-1977 3 Disc 10.75 WW 140-1019 WW 140-1019-D Century, Late 1979-1981 3, 5 Disc 10.75 WW 140-1033 WW 140-1033-D Regal 1973-1977 3 Disc 10.75 WW 140-1019 WW 140-1019-D Regal, Late 1979-1987 3, 5 Disc 10.75 WW 140-1033 WW 140-1033-D Skylark 1975-1978 3 Disc 10.75 WW 140-1019 WW 140-1019-D Skylark 1979-1979 - Disc 10.75 WW 140-8175 WW 140-8175-D Chevrolet Blazer, 4x2, 100.5 Wheel Base 1983-1990 3 Disc 10.75 WW 140-1033 WW 140-1033-D Camaro 1967-1969 - Disc/Drum 10.75 WW 140-1017 WW 140-1017-D Camaro 1982-1987 3 Disc 10.75 WW 140-1035 WW 140-1035-D Camaro 1979-1981 3 Disc 10.75 WW 140-8175 WW 140-8175-D Camaro 1970-1978 3 Disc 10.75 WW 140-1019 WW 140-1019-D Camaro, Single Piston Caliper 1988-1992 3 10.75 WW 140-1035 WW 140-1035-D Caprice 1977-1978 3 Disc 10.75 WW 140-1019 WW 140-1019-D Chevelle 1967-1972 - Disc/Drum 10.75 WW 140-1017 WW 140-1017-D Chevelle 1973-1977 3 Disc 10.75 WW 140-1019 WW 140-1019-D Chevelle, Modified 1964-1966 7 Drum 10.75 WW 140-1017 WW 140-1017-D Full 1977-1978 3 Disc 10.75 WW 140-1019 WW 140-1019-D 3

Applications (continued) Solid Drilled Chevrolet Passenger w/11 1979-1990 2, 3 Disc 10.75 WW 140-8175 WW 140-8175-D (continued) Chevy II/Nova 1967-1974 - Disc/Drum 10.75 WW 140-1017 WW 140-1017-D Chevy S10 1982-1990 3 Disc 10.75 WW 140-1033 WW 140-1033-D Chevy II, Modified 1964-1966 7 Drum 10.75 WW 140-1017 WW 140-1017-D El Camino 1967-1972 - Disc/Drum 10.75 WW 140-1017 WW 140-1017-D El Camino 1973-1977 3 Disc 10.75 WW 140-1019 WW 140-1019-D El Camino, Modified 1964-1966 7 Drum 10.75 WW 140-1017 WW 140-1017-D El Camino, Late 1979-1987 3, 5 Disc 10.75 WW 140-1033 WW 140-1033-D Impala, w/11 1977-1978 2, 3 Disc 10.75 WW 140-1019 WW 140-1019-D Malibu 1973-1977 3 Disc 10.75 WW 140-1019 WW 140-1019-D Malibu, Late 1979-1987 3, 5 10.75 WW 140-1033 WW 140-1033-D Monte Carlo 1970-1972 - Disc/Drum 10.75 WW 140-1017 WW 140-1017-D Monte Carlo 1973-1977 3 Disc 10.75 WW 140-1019 WW 140-1019-D Monte Carlo, Late 1979-1988 3, 5 Disc 10.75 WW 140-1033 WW 140-1033-D Nova 1975-1978 3 Disc 10.75 WW 140-1019 WW 140-1019-D Nova 1979-1979 3 Disc 10.75 WW 140-8175 WW 140-8175-D Dodge/Chrysler Aspen 1976-1980 9 Disc 10.75 WW 140-2719 WW 140-2719-D Challenger 1970-1972 9 Drum 10.75 WW 140-2711 WW 140-2711-D Challenger 1973-1974 6, 9 Disc 10.75 WW 140-2719 WW 140-2719-D Charger 1966-1972 9 Drum 10.75 WW 140-2711 WW 140-2711-D Charger 1973-1978 9 Disc 10.75 WW 140-2719 WW 140-2719-D F-Body Passenger 1979-1988 9 Disc 10.75 WW 140-2719 WW 140-2719-D Cordoba 1975-1983 9 Disc 10.75 WW 140-2719 WW 140-2719-D Coronet 1965-1972 9 Drum 10.75 WW 140-2711 WW 140-2711-D Coronet 1973-1976 9 Disc 10.75 WW 140-2719 WW 140-2719-D Dart 1963-1972 9 Drum (9 ) 10.75 WW 140-2712 WW 140-2712-D Dart 1965-1972 9 Drum (10 ) 10.75 WW 140-2713 WW 140-2713-D Dart 1973-1974 6, 9 Disc 10.75 WW 140-2719 WW 140-2719-D Diplomat 1977-1988 9 Disc 10.75 WW 140-2719 WW 140-2719-D Passenger (excludes 880 series) 1962-1964 9 Drum 10.75 WW 140-2711 WW 140-2711-D F-Body 1973-1981 9 Disc 10.75 WW 140-2719 WW 140-2719-D Imperial 1981-1983 9 Disc 10.75 WW 140-2719 WW 140-2719-D Lancer 1961-1962 9 Drum (9 ) 10.75 WW 140-2712 WW 140-2712-D LeBaron 1977-1981 9 Disc 10.75 WW 140-2719 WW 140-2719-D Magnum 1978-1979 9 Disc 10.75 WW 140-2719 WW 140-2719-D Mirada 1980-1983 9 Disc 10.75 WW 140-2719 WW 140-2719-D R/T 1967-1970 9 Drum 10.75 WW 140-2711 WW 140-2711-D Ford Early Passenger, Spindle 1937-1948 - 10.75 WW 140-1501 WW 140-1501-D Fairlane 1966-1969 - Drum 11.75 WW 140-4307 WW 140-4307-D Fairlane 1967-1969 4 Disc 11.75 WW 140-4307 WW 140-4307-D Falcon 1965-1969 4 Disc/Drum 11.75 WW 140-4307 WW 140-4307-D Mustang SVO 1984-1986 3 Disc 10.75 WW 140-4503 WW 140-4503-D Mustang V8 1987-1993 3 10.75 WW 140-4503 WW 140-4503-D 4

Applications (continued) Solid Drilled Ford Mustang II 1974-1978 - Disc 10.75 WW 140-1013 WW 140-1013-D (continued) Mustang V8 1965-1969 4 Disc/Drum 11.75 WW 140-4307 WW 140-4307-D Mustang Shelby, GT350, GT500 1970-1970 4 Disc 11.75 WW 140-4307 WW 140-4307-D Pinto 1971-1980 - Disc/Drum 10.75 WW 140-1013 WW 140-1013-D Ranchero 1967-1969 4 Disc/Drum 11.75 WW 140-4307 WW 140-4307-D Thunderbird, Turbo Coupe 1987-1988 3 Disc 10.75 WW 140-4503 WW 140-4503-D GMC Sprint 1971-1972 - Disc/Drum 10.75 WW 140-1017 WW 140-1017-D Sprint 1979-1987 3 Disc 10.75 WW 140-1033 WW 140-1033-D Sprint 1973-1977 3 Disc 10.75 WW 140-1019 WW 140-1019-D Jimmy, 4x2, 100.5 Wheel Base 1983-1990 3 Disc 10.75 WW 140-1033 WW 140-1033-D S15, 4x2 1982-1990 3 Disc 10.75 WW 140-1033 WW 140-1033-D Mercury Bobcat 1975-1980 - Disc 10.75 WW 140-1013 WW 140-1013-D Comet 1965-1969 4 Disc/Drum 11.75 WW 140-4307 WW 140-4307-D Cougar 1967-1969 4 Disc/Drum 11.75 WW 140-4307 WW 140-4307-D Oldsmobile Cutlass 1973-1977 3 Disc 10.75 WW 140-1019 WW 140-1019-D Cutlass, Late, RWD 1979-1988 3 10.75 WW 140-1033 WW 140-1033-D F-85 1967-1972 - Disc 10.75 WW 140-1017 WW 140-1017-D F-85 1970-1972 8 Drum 10.75 WW 140-1017 WW 140-1017-D F-85 1973-1977 3 Disc 10.75 WW 140-1019 WW 140-1019-D Oldsmobile w/ 11 1977-1978 2, 3 Disc 10.75 WW 140-1019 WW 140-1019-D Oldsmobile w/ 11 1979-1985 2, 3 Disc 10.75 WW 140-8175 WW 140-8175-D Omega 1973-1974 - Disc/Drum 10.75 WW 140-1017 WW 140-1017-D Omega 1975-1978 3 Disc 10.75 WW 140-1019 WW 140-1019-D Omega 1979-1979 3 Disc 10.75 WW 140-8175 WW 140-8175-D Plymouth Barracuda 1964-1969 9 Drum (9 ) 10.75 WW 140-2712 WW 140-2712-D Barracuda 1965-1969 9 Drum (10 ) 10.75 WW 140-2713 WW 140-2713-D Barracuda 1970-1972 9 Drum 10.75 WW 140-2711 WW 140-2711-D Barracuda 1973-1974 6, 9 Disc 10.75 WW 140-2719 WW 140-2719-D Belvedere 1965-1970 9 Drum 10.75 WW 140-2711 WW 140-2711-D Fury (excludes Gran) 1975-1977 9 Disc 10.75 WW 140-2719 WW 140-2719-D GTX 1967-1971 9 Drum 10.75 WW 140-2711 WW 140-2711-D Plymouth 1962-1964 9 Drum 10.75 WW 140-2711 WW 140-2711-D F-Body Passenger 1976-1988 9 Disc 10.75 WW 140-2719 WW 140-2719-D Road Runner 1968-1972 9 Drum 10.75 WW 140-2711 WW 140-2711-D Satellite 1965-1972 9 Drum 10.75 WW 140-2711 WW 140-2711-D Satellite 1973-1975 9 Disc 10.75 WW 140-2719 WW 140-2719-D Superbee 1968-1970 9 Drum 10.75 WW 140-2711 WW 140-2711-D Valiant 1960-1972 9 Drum (9 ) 10.75 WW 140-2712 WW 140-2712-D Valiant 1965-1972 9 Drum (10 ) 10.75 WW 140-2713 WW 140-2713-D Valiant 1973-1974 6, 9 10.75 WW 140-2719 WW 140-2719-D Pontiac Bonneville 1982-1986 3 Disc 10.75 WW 140-1033 WW 140-1033-D Firebird 1982-1987 3 Disc 10.75 WW 140-1035 WW 140-1035-D Firebird 1970-1978 3 Disc 10.75 WW 140-1019 WW 140-1019-D 5

Applications (continued) Solid Drilled Pontiac Firebird 1979-1981 3 Disc 10.75 WW 140-8175 WW 140-8175-D (continued) Firebird, Single Piston Caliper 1988-1992 3 10.75 WW 140-1035 WW 140-1035-D Grand Prix 1973-1977 3 Disc 10.75 WW 140-1019 WW 140-1019-D Grand Prix, Late 1979-1987 3, 5 Disc 10.75 WW 140-1033 WW 140-1033-D LeMans 1973-1977 3 Disc 10.75 WW 140-1019 WW 140-1019-D LeMans, Late 1979-1981 3, 5 Disc 10.75 WW 140-1033 WW 140-1033-D Phoenix 1977-1978 3 Disc 10.75 WW 140-1019 WW 140-1019-D Phoenix 1979-1979 3 Disc 10.75 WW 140-8175 WW 140-8175-D Full, w/ 11 1977-1978 2, 3 Disc 10.75 WW 140-1019 WW 140-1019-D Full, w/ 11 1979-1981 2, 3 Disc 10.75 WW 140-8175 WW 140-8175-D Tempest 1973-1977 3 Disc 10.75 WW 140-1019 WW 140-1019-D Ventura II 1971-1974 - Disc/Drum 10.75 WW 140-1017 WW 140-1017-D Ventura II 1975-1977 3 Disc 10.75 WW 140-1019 WW 140-1019-D Notes: * Red caliper option, add $100 1 Caliper brackets not included 2 Disc spindles with 11 OE rotor only 3 Factory caliper mounting ears and backing plate bolt holes must be modified 4 Backing plate mount holes must be redrilled and tapped on disc brake spindles 5 Late spindle uses a torque nut to retain hub and bearing 6 Spindle must be modified 7 Mid 1965 and earlier require spindle modifications 8 With O.A.I. drum spindle 9 Hubs come drilled for 5 x 4.00 / 5 x 4.50 wheel lug patterns. However, the 5 x 4.00 pattern does not guarantee fitment with all 5 x 4.00 wheels, either OEM or aftermarket. Reference individual data sheets for wheel center hole clearance. All prices subject to change. Current pricing available at www.cachassisworks.com. Chris Alston s Chassisworks, Inc. 8661 Younger Creek Drive Sacramento, CA 95828 6 Order: 800-722-2269 Tech: 916-388-0288 Fax: 916-388-0295 sales@cachassisworks.com www.cachassisworks.com File: Front4PistonDrag_DS.indd Rev. 02/21/2014