NCS Hydraulik GmbH Equipment and service for the oil and gas industry 1
BOP Control units build to customers request
Control Unit Pump flow Q = 11,9 gal/min Working pressure p = 3000 psi E-power = 12,8 hp 2 x air pump 5,8 gal/min Oil reservoir = 476 gal Accumulator volume = 238 gal Including remote control panel Electrical remote operation Including ATEX Api conform Mountable in 20'' standard container
Control Unit with it's own emergency generator 2 x Pump flow Q = 54 gal/min Working pressure p = 3000 psi 2 x E-Power = 27,2 hp Oil Reservoir = 854 gal Including oil sump Including 2 remote control panels Electrical remote operation GEP 65-2 generator set with diesel exhaust particulate filters Including ATEX API conform Mountable in 40'' standard container
Control Unit for Sucker Rod and Tubing change Pump flow Q = 8,8 gal/min Working pressure p = 3000 psi E-Power = 14,7 hp Oil Reservoir = 100 gal Including oil sump Including 2 remote control panels Pneumatic remote operation Including ATEX API conform Cpl. with 10 Container and trailer
Control Unit Pump flow Q = 1,3 gal/min Working pressure p = 3000 psi Pneumatic = 73 psi Oil Reservoir = 50 gal Including oil sump Including 2 remote control panels Electrical remote operation Including ATEX API conform
Control Unit 2xPump flow Q = 5,5 gal/min Working pressure p = 3000 psi Oil Reservoir = 220 gal Including oil sump Including 2 remote control panels Electrical remote operation Including ATEX API conform
Control Unit 2xPump flow Q = 30 gal/min Working pressure p = 3000 psi Oil Reservoir = 500 gal Including oil sump 30 accumulators 13 gal Drillers remote panel: cable remote, ATEX zone I Toolpushers remote panel: radio controled remote Including ATEX API conform Mountable in 20 standard container
Control Unit Unit for 6 functions 1 Triplex Pump 3 Air driven pumps Working pressure p = 3000 psi Oil Reservoir = 530 gal Including oil sump 28 accumulators 13 gal Drillers remote panel: cable remote, ATEX zone I Toolpushers remote panel: radio controled remote Including ATEX zone II for the unit API monogram Mountable in 20 standard container
Control Unit Unit for 7 functions 1 Triplex Pump 2 Air driven pumps Working pressure p = 3000 psi Shear assist p = 5000 psi (aut. activation) Oil Reservoir = 400 gal Including oil sump 20 accumulators 13 gal 4 accumulators 13 gal for shear system Drillers remote panel: cable remote, ATEX zone I Toolpushers remote panel: radio controled remote Including ATEX zone II for the unit API monogram 20 DNV offshore container
Shear pressure max. 5000 psi Shear pressure regulator 500-5000 psi Automatical activation at (Bypass High ) Elctrical pump 5000 psi for shear accumulators Automatic high pressure shear assist integrated in NCS Control Units
Skid mounted test units: Pressure ratings: 0 10.000 PSI 0 15.000 PSI 0 20.000 PSI High Pressure Test Unit Optional with chart recorder, or other electronical masurement devices. Customized products.
Casing jack hydraulic build to customers request Hydraulic parallel feed for 4 cylinders Including ATEX Including electronic panel and remote control
Casing jack hydraulic -4 cylinders in parallel feed -parallel feed light Electrical on/off -parallel feed upper class proportional system -Operation by remote control cable or radio controlled -Data logger and/or interface -cylinder dimension on request -ideal for rigs with low hook load -Complete system ATEX zone I
Ezy torque cylinder -Hydraulic Ezy Torque cylinder -Including mechanical ATEX -Build to customers specification Ezy torque systems build to customers request For example: Cylinder 125/80 x 700 stroke Force: 80 kn at 65 bar Max. force limitation
Proportional electronical ezy torque system -Main power from rig hydraulic power unit -Operation and torque setting from drillers cabin -Data logger and/or interface -Easy to install -Complete system ATEX zone I
Ezy torque system -Make-up to 150 lbf ft, (230 Nm) -Build to customers specification -Cpl. Unit ATEX Zone I Ex-II 2G T4 Easy Torque cylinder with power unit
Choke control power unit Stainless steel Electrical and mechanical ATEX Nitrogene emergency actuation
Rotary table Hydraulically driven by variable or fixed displacement pump. Rotary Table drive For example: High speed 33 r/min with 17100 Nm Low speed 15 r/min with 31800 Nm Design to customers request
Wellhead control unit These stainless steel control units are designed to control: down hole safety valves, master valves, wing valves,
Control unit for safety-valves Safety valve control unit Loss of electric power means closing the safety-valve automaticly. Oil tank: 13 gal Accumulator: 2.6 gal Pressure: adjustable -3335 PSI
Hydraulic power units build to customers request
Friction wheel for whire ropes build to customers request
Friction wheel for whire ropes -It`s own power unit -Operation and torque setting directly or by remote control from -Complete system ATEX zone I if needed -Multiple drum diametres and drum width
Contact: Nico C. Schwermer NCS Hydraulik GmbH Auf dem Radberg 2 D- 27721 Ritterhude Tel.: +49 (0)4292 9925028 Fax: +49 (0)04292 9925029 Mobil: +49 (0)174/2851070 e-mail: nico-c.schwermer@ncs-hydraulik.de www.ncs.hydraulik.de Bernd Fielitz NCS Hydraulik GmbH Auf dem Radberg 2 D- 27721 Ritterhude Tel.: +49 (0)4292 9925013 Fax: +49 (0)4292 9925029 Mobil: +49 (0)174/1970821 e-mail: bernd.fielitz@ncs-hydraulik.de www.ncs.hydraulik.de