Order form Order form Use this order form to order parameter adjustments by a Scania workshop. Ordered by/contact person Date Remarks/other Company Name Telephone Vehicle Type designation (for example R580 B6x2) Registration number Chassis serial number Scania CV AB 2017, Sweden 1 (10)
More information on the parameters is found in the document Parameters Powertrain. Note: This is a comprehensive list. The parameters and settings that are available on the vehicle depend on the vehicle specification. If the vehicle is ordered with FFU (Fit For Use) or S-order (special order), which includes changed parameters, there may be deviations from the stated default settings in factory-supplied vehicles. Scania CV AB 2017, Sweden 2 (10)
Clutch Parameters for Opticruise Clutch control with activated power take-off Standard Activated Braking in operation with split shaft power take-off Open clutch Keep the clutch closed Scania CV AB 2017, Sweden 3 (10)
Engine Engine speed control Order of priority Last used Number order Engine speed change at stepped control Active, 10-200 rpm in increments of 10 rpm Maximum engine speed while braking Permits increased engine speed during braking Engine speed when changing gear, automatic gearbox 300-2,000 rpm in increments of 10 rpm and idling speed. 500-3,000 rpm in increments of 1 rpm Raised idling speed Raised idling speed Active, 500-800 rpm in increments of 10 rpm Conditions for parking brake Conditions for neutral position Scania CV AB 2017, Sweden 4 (10)
Constant engine speed limiter Engine speed at constant engine speed limitation Active, 500-3,500 rpm in increments of 1 rpm. Constant engine torque limiter Torque with constant engine torque limitation Active, 0-3,500 Nm in increments of 10 Nm. Analogue engine speed control Potentiometer, lower voltage limit Active, 0-5 V in increments of 0.1 V Potentiometer, upper voltage limit Active, 0-5 V in increments of 0.1 V Scania CV AB 2017, Sweden 5 (10)
Engine speed control 1, 2, 3 and 4 Engine speed control 1 2 3 4 Type of control Switch for cruise control Fixed value Analogue control External CAN Governor characteristics Normal Soft Hard Fixed engine speed Active, 300-3,000 rpm in increments of 1 rpm. Upper engine speed limit Active, 300-3,000 rpm in increments of 1 rpm. Lower engine speed limit Active, 300-3,000 rpm in increments of 1 rpm. Conditions for neutral position Accelerator pedal engaged when controlling the engine speed Increase in engine speed, 50-1,000 rpm/s in increments of 50 rpm/s. Upper vehicle speed limit Active, 5-150 km/h in increments of 1 km/h. Parking brake Scania CV AB 2017, Sweden 6 (10)
Cylinder balancing Cylinder balancing Active Inactive Inactive when power take-off is in use Inactive when the vehicle is moving Scania CV AB 2017, Sweden 7 (10)
Power take-off Type of power take-off a (for example ED120): Number of circuits: Parameters Possible value Desired value Comments Power take-off adaptation Active Inactive Acknowledgement Power take-off, preselected gear Active Inactive Torque limitation for power take-off Active, 0 Nm max engine torque in increments of 1 Nm Engine speed limitation for power take-off Active, 500-3,000 rpm in increments of 1rpm Type of activation Conditions for neutral position Conditions for parking brake Manual Automatic Drive position Activate Activate/Deactivate Activate Activate/Deactivate Scania CV AB 2017, Sweden 8 (10)
Type of power take-off a (for example ED120): Number of circuits: Parameters Possible value Desired value Comments Conditions for reverse gear Upper engine speed limit for permitted activation Lower engine speed limit for permitted activation Upper engine speed limit for deactivation Lower engine speed limit for deactivation Upper vehicle speed limit for permitted activation Lower vehicle speed limit for permitted activation Upper vehicle speed limit for deactivation, 300-4,000 rpm in increments of 10 rpm, 300-4,000 rpm in increments of 10 rpm, 300-4,000 rpm in increments of 10 rpm, 300-4,000 rpm in increments of 10 rpm, 1-150 km/h in increments of 1 km/ h, 1-150 km/h in increments of 1 km/ h, 1-150 km/h in increments of 1 km/ h Scania CV AB 2017, Sweden 9 (10)
Type of power take-off a (for example ED120): Number of circuits: Parameters Possible value Desired value Comments Lower vehicle speed limit for deactivation a. Fill out a new list for each power take-off. Manoeuvring mode, 1-150 km/h in increments of 1 km/ h Type of power take-off a (for example ED120): Number of circuits: Parameters Possible value Desired value Comments Automatic manoeuvring mode for activated power take-off Active Inactive Reactivation of manoeuvring mode Active Inactive a. Fill out a new list for each power take-off. Gearbox Parameters Possible value Desired value Comments Using the clutch actuator Reduced Normal Scania CV AB 2017, Sweden 10 (10)