3 Piece Threaded High Pressure Fire-Safe all Valves Order code information 1.1 3 piece threaded fire-safe ball valves ody Rating Shell Material Valve ore nd onnection Trim Material Firesafe Seat & Seal Material 3 3 PSI (lass 15) 6 6 PSI (lass 25) L S 15N LF2 182-F3 R Reduced bore F Full bore T Threaded SW Socketweld See Note 1 See Note 2 See Note 3 The order code system lets you specify your pressure class, material and reduced or full port. Note 1: ll valves are standard with 3 SS trim and meet N MR-1-75-22 & MR-1-3 Note 2: ll valves conform with applicable requirements of the valve fire test per PI 67 5th dition. Note 3: Refer to individual drawings for seat / seal and pressure / temperature ratings. MS 26/11/1 6/6/11 Technical data, dimensions, materials & specifications are subject to change without notice.
HM-3RT 3/4" ISO-FT.34LT WOG 3 2 @ 18F/82 TRIM 3 ST LRIN N OY/P 15N 3 PSI all Valves 119 LI HM-3RT/LRT 1.2 119 119 Reduced Port / Floating all Three Piece Threaded ody LF2 & 15N onstruction NPT Threads to NSI 1.2.1 lowout Proof Stem nti-static esign Positive Lock-Out evice Fire-Safe ertified to PI-67 5th dition omplies with N MR-13 N MR-175/ISO 15156 3 P.S.I W.O.G. (lass 15 Limited) 3/4"-3" NM/MTRIL RT LRT 2. Handle Nut / 36.S. Plated 3. Gland Flange / 36.S. Plated 4. elleville Washer / S.S. 31 6. Gland / Stainless Steel 276 Type 34 7. Stem O-ring / HNR (1 1 /2" - 3") 8. Stem / Stainless Steel 276 Type 3 9. Thrust Washer / elrin 1. ap / 15N 35 GR. LF2 11. ody O-ring / HNR 12. all / Stainless Steel 351 GR. F8M (3) 13. Seat / elrin 14. ody / 15N 35 GR. LF2 15. Spring and Pin / Stainless Steel 276 Type 34. ap Screw / 36.S. Plated../ m I M N S I O N S m size 2 25 32 4 5 8 mm/in 3 /4 1 1 1 /4 1 1 /2 2 3 12.7 22.2 22.2 32. 38.1 5. mm/in.5.87.87 1.26 1.5 1.96 55.5 54. 76. 79.5 79.5 127. mm/in 2.19 2.13 2.99 3.13 3.13 5. 111. 18. 152. 159. 159. 254. mm/in 4.37 4.25 5.98 6.26 6.26 1. 83. 112. 112. 138. 143. 177. mm/in 3.27 4.41 4.41 5.43 5.63 6.97 122. 172. 172. 279. 279. 32. mm/in 4.8 6.77 6.77 1.98 1.98 11.89 V 15 35 35 1 175 48 Weights 1.22 1.72 2.43 3.7 5.89 15.25 lb/ kg 2.69 3.79 5.36 8. 12.99 33.62 3 25 2 15 1 8 6 4 3 2 15 1 5 PRSSUR TMPRTUR RTING 3 /4" - 3" 1 F (38 ) 18 F / 82 KPG 2682 17225 1342 5515 4136 2757 268 1378 134 689 344-2 5 1 15 2 25 3 35 4 45 5 (ºF) -29-18 1 38 66 93 121 149 177 24 232 26 (º) For 15N low temp limit is -2 F (-29 ) For LF2 low temp limit is -4 F (-4 ) MS 215/5/25 26/11/1
MFW 3/4 ISO-14 241 WOG 1 3 1F/12 TRIM 3 ST LRIN M OY/P 3 3 PSI all Valves 18 LI HM-3FT/LFT 18 18 Full Port / Floating all Three Piece Threaded ody LF2 & 15N onstruction NPT Threads to NSI 1.2.1 lowout Proof Stem nti-static esign Positive Lock-Out evice Fire-Safe ertified to PI-67 5th dition omplies with N MR-13 N MR-175/ISO 15156 3 P.S.I W.O.G. (15 lass) 1/4"-2" 1.3 NM/MTRIL FT LFT 2. Handle Nut / 36.S. Plated 3. Gland Flange / 36.S. Plated 4. elleville Washer / S.S. 31 6. Gland / Stainless Steel 276 Type 34 7. Stem O-ring / HNR (1 1 /2" 2") 8. Stem / Stainless Steel 276 Type 3 9. Thrust Washer / elrin 1. ap / 15N 35 GR. LF2 11. ody O-ring / HNR 12. all / Stainless Steel 351 GR. F8M (3) 13. Seat / elrin 14. ody / 15N 35 GR. LF2 15. Spring and Pin / Stainless Steel 276 Type 34. ap Screw / 36.S. Plated../ 3 25 2 15 1 8 6 4 3 2 15 1 5 PRSSUR TMPRTUR RTING 1 /4" - 2" 1 F (38 ) 18 F / 82 KPG 2682 17225 1342 5515 4136 2757 268 1378 134 689 344-2 5 1 15 2 25 3 35 4 45 5 (ºF) -29-18 1 38 66 93 121 149 177 24 232 26 (º) For 15N low temp down to -2 F (-29 ) For LF2 low temp down to -4 F (-4 ) m I M N S I O N S m size 8 15 15 2 25 4 5 mm/in 1 /4 3 /8 1 /2 3 /4 1 1 1 /2 2 12.7 12.7 12.7 22.2 24. 38.1 5. mm/in.5.5.5.87.94 1.5 1.96 49. 49. 49. 54. 66.5 79.5 79.5 mm/in 1.93 1.93 1.93 2.13 2.62 3.13 3.13 98. 98. 98. 18. 133. 159. 159. mm/in 3.86 3.86 3.86 4.25 5.24 6.26 6.26 83. 83. 83. 112. 1. 143. 177. mm/in 3.27 3.27 3.27 4.41 4.57 5.63 6.97 122. 122. 122. 172. 172. 279. 32. mm/in 4.8 4.8 4.8 6.77 6.77 1.98 11.89 V 9 9 15 45 65 25 48 Weights 1.32 1.28 1.2 1.84 2.31 6.15 1.3 kg/lb 2.9 2.82 2.65 4.6 5.9 13.56 22.71 MS 215/5/25 26/11/1 9/12/1 Technical data, dimensions, materials & specifications are subject to change without notice.
HM-3LFW 1/4" ISO-FT.34LT WOG 3 3 @ 4 F/24 TRIM 3 ST PK N OY/P 35 GR.LF2 3 PSI all Valves 119 LI HM-3FSW/3LFSW 1.4 119 119 Full Port / Floating all onstruction Three Piece Threaded ody LF2 & 15N onstruction Socket Weld nds to NSI.11 lowout Proof Stem nti-static esign Positive Lock-Out evice Fire-Safe ertified to PI-67 5th dition omplies with N MR-13 N MR-175/ISO 15156 3 P.S.I W.O.G. (lass 15 Limited) 1/4"-2" NM/MTRIL FT LFT 2. Handle Nut / 36.S. Plated 3. Gland Flange / 36.S. Plated 4. elleville Washer / S.S. 31 6. Gland / Stainless Steel 276 Type 34 7. Stem O-ring / FKM-GLT (1 1 /2" & 2") 8. Stem / Stainless Steel 276 Type 3 9. Thrust Washer / Peek 1. ap / 15N 35 GR LF2 11. ody O-ring / FKM 12. all / Stainless Steel 351 GR. F8M (3) 13. Seat / Peek 14. ody / 15N 35 GR LF2 15. Spring and Pin / Stainless Steel 276 Type 34. ap Screw / 36.S. Plated../ m I M N S I O N S m size 8 15 15 2 25 4 5 mm/in 1 /4 3 /8 1 /2 3 /4 1 1 1 /2 2 12.7 12.7 12.7 22.2 24. 38.1 5. mm/in.5.5.5.87.94 1.5 1.96 49. 49. 49. 54. 66.5 79.5 79.5 mm/in 1.93 1.93 1.93 2.13 2.62 3.13 3.13 98. 98. 98. 18. 133. 159. 159. mm/in 3.86 3.86 3.86 4.25 5.24 6.26 6.26 83. 83. 83. 112. 1. 143. 177. mm/in 3.27 3.27 3.27 4.41 4.57 5.63 6.97 122. 122. 122. 172. 172. 279. 32. mm/in 4.8 4.8 4.8 6.77 6.77 1.98 11.89 V 9 9 15 45 65 25 48 Weights 1.32 1.28 1.2 1.84 2.31 6.15 1.3 lb/ kg 2.9 2.82 2.65 4.6 5.9 13.56 22.71 3 25 2 15 1 5 PRSSUR TMPRTUR RTING 1 /4" - 2" KPG 2682 17225 1342 3447-2 5 1 15 2 25 3 35 4 45 5 (ºF) -29-18 1 38 66 93 121 149 177 24 232 26 (º) For 15N low temp limit is -2 F (-29 ) For LF2 low temp limit is -4 F (-4 ) MS 215/5/27 26/11/1
HM-6FT 1/4" ISO-FT.34LT WOG 6 545 @ 3 F/149 TRIM 3 ST PK N OY/P 15N HIN 6 PSI all Valves 119 LI HM-6FT/LFT 119 119 Full Port Floating all Three Piece Threaded ody LF2 & 15N onstruction NPT Threads to NSI 1.2.1 lowout Proof Stem nti-static esign Positive Lock-Out evice Fire-Safe ertified to PI-67 5th dition omplies with N MR-13 N MR-175/ISO 15156 6 P.S.I W.O.G. (lass 25 Ltd) 1/4"-2" 1.5 NM/MTRIL FT LFT 2. Handle Nut / 36.S. Plated 3. Gland Flange / 36.S. Plated 4. elleville Washer / S.S. 31 6. Gland / Stainless Steel 276 Type 34 7. Stem O-ring / HNR (1 1 /2" & 2") 8. Stem / Stainless Steel 276 Type 3 9. Thrust Washer / Peek 1. ap / 15N 35 GR LF2 11. ody O-ring / HNR 12. all / Stainless Steel 351 GR. F8M (3) 13. Seat / Peek 14. ody / 15N 35 GR LF2 15. Spring and Pin / Stainless Steel 276 Type 34. ap Screw / 36.S. Plated../ 6 5 4 3 2 1 PRSSUR TMPRTUR RTING 1 /4" - 2" 1 F (38 ) KPG 41364 3447 27576 2682 m I M N S I O N S m size 8 15 15 2 25 4 5 mm/in 1 /4 3 /8 1 /2 3 /4 1 1 1 /2 2 12.7 12.7 12.7 22.2 24. 38.1 5. mm/in.5.5.5.87.94 1.5 1.96 49. 49. 55.5 54. 66.5 79.5 79.5 mm/in 1.93 1.93 2.19 2.13 2.62 3.13 3.13 98. 98. 111. 18. 133. 159. 159. mm/in 3.86 3.86 4.37 4.25 5.24 6.26 6.26 83. 83. 83. 112. 1. 143. 177. mm/in 3.27 3.27 3.27 4.41 4.57 5.63 6.97 122. 122. 122. 172. 172. 279. 32. mm/in 4.8 4.8 4.8 6.77 6.77 1.98 11.89 V 9 9 15 45 65 25 48 Weights 1.42 1.39 1.36 1.94 3. 8.86 11.22 lb/ kg 3.12 3.6 3. 4.28 6.61 19.53 24.74-2 5 1 15 2 25 3 35 4 45 5 (ºF) -29-18 1 38 66 93 121 149 177 24 232 26 (º) For 15N low temp limit is -2 F (-29 ) For LF2 low temp limit is -4 F (-4 ) MS 215/5/25 26/11/1 9/12/1
HM-6RT 3/4" ISO-FT.34LT WOG 6 545 @ 3 F/149 TRIM 3 ST PK N OY/P 15N HIN 6 PSI all Valves 119 LI HM-6RT/LRT 1.6 119 119 Reduced Port Floating all Three Piece Threaded ody LF2 & 15N onstruction NPT Threads to NSI 1.2.1 lowout Proof Stem nti-static esign Positive Lock-Out evice Fire-Safe ertified to PI-67 5th dition omplies with N MR-13 N MR-175/ISO 15156 6 P.S.I W.O.G. (lass 25 Ltd) 3/4"-2" NM/MTRIL RT LRT 2. Handle Nut / 36.S. Plated 3. Gland Flange / 36.S. Plated 4. elleville Washer / S.S. 31 6. Gland / Stainless Steel 276 Type 34 7. Stem O-ring / HNR (1 1 /2" 2") 8. Stem / Stainless Steel 276 Type 3 9. Thrust Washer / Peek 1. ap / 15N 35 GR LF2 11. ody O-ring / HNR 12. all / Stainless Steel 351 GR F8M 13. Seat / Peek 14. ody / 15N 35 GR LF2 15. Spring and Pin / Stainless Steel 276 Type 34. ap Screw / 36.S. Plated../ m I M N S I O N S m size 2 25 32 4 5 mm/in 3 /4 1 1 1 /4 1 1 /2 2 12.7 22.2 22.2 32. 38.1 mm/in.5.87.87 1.26 1.5 55. 66.5 76. 79.5 92. mm/in 2.19 2.62 2.99 3.13 3.62 111. 133. 152. 159. 184. mm/in 4.37 5.24 5.98 6.26 7.24 83. 112. 112. 138. 143. mm/in 3.27 4.41 4.41 5.43 5.63 122. 172. 172. 279. 279. mm/in 4.8 6.77 6.77 1.98 1.98 V 15 35 35 1 175 Weights 1.19 2.62 6.2 1.2 kg/lb 2.62 5.78 13.67 22.49 6 5 4 3 2 1 PRSSUR TMPRTUR RTING 3 /4" - 2" 1 F (38 ) KPG 41364 3447 27576 2682-2 5 1 15 2 25 3 35 4 45 5 (ºF) -29-18 1 38 66 93 121 149 177 24 232 26 (º) For 15N low temp limit is -2 F (-29 ) For LF2 low temp limit is -4 F (-4 ) MS 215/5/27 26/11/1