MoDPlus Din Distribution Boards

MoDPlus Din Distribution Boards

Introduction MoDPlus DIN Distribution Panel Board System MoDPlus Din type Distribution Board System has been designed and developed locally, incorporating features and benefits not normally found in proprietary type panel boards. Consideration has been given to the requirements most often specified by discerning electrical consulting engineers enabling MoDPlus panels to form part of a total supply package by switchboard builders for major or minor projects. MoDPlus comprises a system of modular enclosures which can easily be bolted together, either vertically or horizontally. When joining enclosures vertically extra securing holes are provided, separate from the gland plate fixings. When joining enclosures side by side, holes have not been provided but dot punch marks are in the metalwork for ease of locating drilling points. Drilling points are also located for hole saw location to simplify placement of holes for cable bushes. TYPICAL DISTRIBUTION BOARD ARRANGEMENT Enclosures can be used as distribution boards with or without 160-250A isolator incorporating 3 phase type tested chassis, earth and neutral links, escutcheon, door if required and top and bottom gland plates. For housing of equipment such as control gear for lighting, load shedding or automation, each enclosure in the range can be supplied empty with door only and two vertically arranged cable trays or with several other options. For horizontal mounting of Din profile equipment such as Clipsal C Bus lighting controls, equipment enclosures incorporate Din rail brackets either straight or stepped enabling both Din profile and non Din profile equipment on the same rail. These enclosures are available with slotted escutcheons featuring optional hinges either left or right hand side. For other requirements enclosures can be supplied with gear trays which attach to the vertical cable trays within the enclosure. Gear trays are pre-punched for easy fitment of Din rail. Handles on Escutcheon Dot Punch (As Guide) For future drilling of holes (For joining enclosures horizontally.) Bracket for Isolator Bracket for Earth and Neutral Links WITH DOOR FITTED (EXTERNAL VIEW) WITHOUT DOOR & ESCUTCHEON (INTERNAL VIEW) DB WITHOUT SEPARATE ISOLATOR Part No No of Poles Height BA-DB3/12 12 420mm BA-DB3/18 18 420mm BA-DB4/24 24 560mm BA-DB4/30 30 560mm BA-DB5/36 36 mm BA-DB5/42 32 mm BA-DB5/48 48 mm BA-DB6/60 60 840mm BA-DB7/72 72 980mm BA-DB9/84 84 1260mm BA-DB9/96 96 1260mm Bracket for the door latch Cable Tray Chassis Base fig 1 WITH ESCUTCHEON FITTED & WITHOUT DOOR FITTED DB WITH 250A 3 POLE ISOLATOR Part No No of Poles Height BA-DB5/12 12 mm BA-DB518 18 mm BA-DB7/24 24 mm BA-DB6/30 30 840mm BA-DB6/36 36 840mm BA-DB7/42 32 980mm BA-DB7/48 48 980mm BA-DB9/60 60 1260mm BA-DB9/72 72 1260mm BA-DB10/84 84 1400mm BA-DB10/96 96 1400mm MoDPlus ( modular construction plus extra features ) Escutcheons are powder coated white when doors are fitted enclosures have a degree of protection rating of IP42. and are the same color as the body when supplied less door. This is achieved by welding of corners and fitment of Doors can be changed from right to left in the field if required. gaskets both under the full width removable cable gland ModPlus distribution panel boards are supplied with laminate plates and compression gasket fitted to the door. type labels for circuit designation, Isolator, Warning and Escutcheons are fitted with lift-off handles ( on distribution Emergency lighting as required. boards ) and can also accommodate hinges as an option. Distribution panel boards are designed to accept LS 6kA or Dot punch locations are embedded in the rear of the 10kA MCBs and a wide range of ancillary devices such as escutcheon on top and bottom left and right sides for emergency lighting kits, extra contactors for lighting and correct location of fitting screws. Holes for the shooting control, load shedding contactors, time clocks, rotary cam bolts are already located in each corner. switches and extra terminals. MoDPlus distribution panel boards and equipment Busbar Chassis are type tested to 25kA 0.1sec 250A and housings are available in X15 Orange and N42 Storm Grey. 30kA 0.1sec 400A to IEC 60439-1 Cert Nos R46-1367 & 1368. Page 1

RUDOL F 250A 3P SWITCH RUDOL F 2 5 0A 3P S W ITCH DISCONN ECTOR RUDO LF 25 0A 3 P SWITCH DISCO NN ECTOR RUDO LF 25 0A 3 PSWITCH DISCO NNEC TOR RUDOLF 250A3PSWITCH DISCO NNECTOR RUDOL F25 0 A 3P SWITCH RUDOL F25 0 A 3P SWITCH DISCONNECTO R RUDOL F250A 3P SWITCH DISCONNECTO R RUDOL F250A 3P SWITCH RUDOL F250A 3P SWITCH RUDOL F 250A 3P SWITCH Features MoDPlus DIN Distribution Panel Board System * Modular design for ease of enclosure coupling * Cabinet, doors and escutcheon 1.6mm mild steel folded and welded as required * Escutcheons fitted with lift-off handles ( only on distribution boards ) * Gland plates top and bottom, undrilled, full size and fitted with gaskets * Form 1 segregation to AS3439-1 2002 * IP 42 degree of protection with gaskets on door and gland plates as standard * Type tested busbar fault rating; 400A 30kA 0.1sec, 250A 25kA 0.1sec * Neutral and Earth Bar 2 screw type angled for ease of connection * Standard colour powder coat X15 Orange cabinet and door, N42 Grey optional, white escutcheon. * Engraved plastic laminate labels for "Isolator" "Warning" "Emergency Lighting" & circuit number RANGE OF ENCLOSURES ENCLOSURE DEPTH INCLUDING DOOR 210mm 560X420 560X420 (12 POLE) (18 POLE) 560X560 (24 POLE) 560X560 (30 POLE) (36 POLE) (42 POLE) (48 POLE) 560X840 (60 POLE) 560X980 (72 POLE) 560X1260 (84 POLE) 560X1260 (96 POLE) (12 POLE) (18 POLE) (24 POLE) 560X840 560X840 (30 POLE) (36 POLE) 560X980 (42 POLE) 560X980 (48 POLE) 560X1260 (60 POLE) 560X1260 560X1400 560X1400 (72 POLE) (84 POLE) (96 POLE) 560 280 420 560 840 980 1260 1400 1260 560 1400 1400 840 Extra Benefits fig 2 * Neutral Link capable of being terminated with oversized cable > 16mm sq * Optional hinged escutcheon either left or right hand side * Left or right hinged door, capable of being changed on site * All enclosures being easily adapted to house various equipment * Chassis and Din rail brackets available for mounting equipment * Stepped Din rail bracket to suit combination of Din and conventional devices * 250 Amp 3 pole switch disconnector with MCB profile as Isolator * 100 Amp 3 pole switch disconnector chassis mounted for < 50mm sq cable * Enclosures fitted with 2 vertical cable trays as standard * Wide range of enclosures available - 8 sizes ModPLus Din Distribution Panel Board System is flexible and can accommodate a host of specified devices as well as other products available from Bridex Australia. Components supplied by Bridex all comply with the latest Australian or European Standards and mandatory devices such as MCB's, RCD's and RCBO's have all been certified by Department of Fair Trading. LS Din type MCB's have been tested in conjunction with a range of LS MCCB's to enable correct application ensuring discrimination and enhaced back-up. Page 2

MoDPlus DIN Distribution Panel Board System Enclosures for distribution boards Distribution board enclosures have been designed for ease of cabling with adequate space to pull through cables and with fitment of cable trays. Circuit breakers can be easily fitted to the chassis system having excellent alignment properties. This enables the escutcheon to be fitted and secured efficiently. Earth and Neutral links are well supported by fixing brackets which extend into the corners of the enclosure. The upper horizontal bracket when fitted supports the isolator and provides a means for housing accessory items such as emergency lighting kits, surge diverters and lighting contactors. The vertical cable trays ensure stiffness of the enclosure for greater rigidity even when fixing to uneven surfaces. Fixing of the enclosure to the wall or brackets can be achieved simply via the three fixing holes. Enclosures for base mounted equipment DB 5/24 with escutcheon removed Equipment enclosures for base mounted accessory items such as latched contactors, HRC fault current limiters, higher rated main switches or MCCBs and conventional contactors are supplied with pre-punched gear plates. Pre-punching of holes provides for many mounting options for Din rail cable ducting etc. AB 4E Equipment Enclosure with gear plate fitted Enclosures for surface mounted equipment Surface mounted equipment is easily accommodated on the straight or stepped horizontal Din rail brackets at 175mm centres. Stepped brackets enable combination of Din surface and base mounted equipment on the same rail. Typical equipment suitable for housing in these enclosures includes normally open and normally closed lighting contactors, time delay relays, surge protection devices, time clocks, control relays and rotary cam switches. CBB 5 Surface Enclosure without escutcheon Page 3

MoDPlus DIN Distribution Panel Board System General arrangement of Equipment Enclosures ACCESSORY ENCLOSURE ( SIZE 2 ) Mounting Pan for contactors etc M8 studs (using stud gun) ACCESSORY ENCLOSURE Part No w/- Base Plate Height BA-AB2C Size 2 280mm fig 3 EQUIPMENT ENCLOSURE Dot Punch (As Guide) For future drilling of holes (For joining boards horizontally) WITH DOOR FITTED (EXTERNAL VIEW) WITHOUT DOOR GEAR PLATE FITTED (INTERNAL VIEW) Bkt for the latch Cable Tray Gear Pan EQUIPMENT ENCLOSURES Part No w/- Base Plate Height BA-AB3C Size 3 420mm BA-AB4C Size 4 560mm BA-AB5C Size 5 mm BA-AB6C Size 6 840mm BA-AB7C Size 7 980mm BA-AB9C Size 9 1260mm BA-AB10C Size 10 1400mm fig 4 SURFACE DIN ENCLOSURE Dot Punch (As Guide) For future drilling of holes (For joining boards horizontally) WITH DOOR FITTED (EXTERNAL VIEW) WITHOUT DOOR & ESCUTCHEON (INTERNAL VIEW) Bkt for the latch Cable Tray WITH ESCUTCHEON FITTED & WITHOUT DOOR FITTED fig 5 SURFACE DIN ENCLOSURES Part No No of horiz slots Height BA-CBB4 2 560mm BA-CBB5 3 mm BA-CBB6 4 840mm BA-CBB7 5 980mm BA-CBB9 6 1260mm BA-CBB10 7 1400mm Page 4

MoDPlus DIN Distribution Panel Board System Components to suit MoDPlus Chassis Miniature circuit breakers and RCBO's 12 to 96 pole, 250A & 400A rated to suit MoDPlus accepts LS MCBs type BKN 6kA and BKNb LS BKN BKN-b and BKH miniature circuit 10kA both of which have appropriate cascading breakers. Also available in hybrid pattern. and discrimination characteristics when used Type tested to IEC 60439-1 for 25kA 0.1 sec with upstream LS MCCBs. Please refer to LS 250A version & 30kA 0.1 sec 400A version. technical bulletin for further information. Test Report Nos R46-1367 R46-1368 resp. Both LG AUB1R 6kA and RKS 10kA RCBOs can be applied. Isolators Latched contactors The Rudolf R13250 switch disconnector Several contactor options are available for load is used as standard for 160 & 250A shedding with latches or lighting control with either having the same profile as an MCB. 3 or 4 pole normally open types. Emergency lighting kits Fault current limiters Emergency lighting kits comprising Bridex makes available Din type HRC fault current 4 pole NC B&J contactor, Broyce Control limiting fuses in 160A Din 00 and 200A Din size1 to 2 hour time delay relay and Telux meet the requirements of AS 3439.1 Clause 8.2.3 rotary cam switch, complying with for backing up 6 and 10kA miniature circuit Australian Standards for Emergency Lighting. breakers when operating on higher prospective fault levels up to 50kA rms. Other components Surge arrestors Lighting contactors Timers & phase failure Time switches Control switches 1 & 3 phase type Normally open & up to 80kA 415V closed up to 63 A Full range both 8 & 11 Single and multi channel Standard and pin plug-in or Din style programmable types special versions Enclosure accessories Spare pole fillers Escutcheon hinges Stepped Bracket (optional) DISTRIBUTED BY www.bridex.com.au Sydney Ph 02 9986 1711 Fax 02 9986 1766 Email sales@bridex.com.au Brisbane Ph 07 3881 6450 Fax 07 3881 6467 Email sales@bridex.com.au Melbourne Ph 03 9484 7227 Fax 03 9484 4899 Email sales@bridex.com.au Perth Ph 08 9493 5255 Fax 08 9493 5242 Email sales@bridex.com.au Publication BA2006-12 Page 5