Powerscreen Ltd. Lower Main Street, Kilbeggan, Co. Westmeath, Ireland Tel: 00 353 506 32178 / 32203 Fax: 00 353 506 32443 Email: powerscreenltd@tinet.ie INTRODUCING THE Trommel 615 LL
Trommel 615 LL JAN. 1999 Page 2 FEATURES Total weight 22,000kg (48,501.2 lbs) Width (transport) 2.548m (8' 4") Length (transport) 13.128m (43' 1") Height (transport) 3.865m (12' 8") Hopper capacity (without hopper extension & grip) 6.5 cu m (8.5 cu yds) Hopper capacity c/w with hopper extension 7m 3 (7.848 yd 3 ) Screen Drum 1.8m x 4.57m (6' x 15') Powerunit Deutz BF4LM 1011F 48 kw (64 Hp) ADVANTAGES Rotating Screen - Area of approx. 19 m.sq (24.8 yd2). Conveniently Located Control Panel Gives finger tip management of all machine functions. Drum Variable Speed Control -For maximum efficiency. Hydraulic oil cooler maintaining low hydraulic oil temperature. Compatible with Powerscreen range. Complete CE Specification. Hydraulic Jacking Legs - Assist rapid set up time. Front Conveyor APPLICATIONS Wood Chippings Topsoil Demolition Waste Compost Recycling
Trommel 615 LL JAN. 1999 Page 3 OPTIONS Radial Front Conveyor (0-180 degrees). The radial conveyor has a 2 ply 800mm (32") wide chevron belt and transfers the fine material to a stockpile. The conveyor is driven by an OMT 315 motor, which transmits torque to the head drum by means of a HRC coupling arrangement.. Tail Conveyor. The tail conveyor has a 2 ply chevron belt, 900mm (35.4 ) wide and transfers material from the drum to a stockpile. The conveyor is driven by an OMT 500 motor, which transmits torque to the head drum by means of a HRC coupling arrangement. Extended Front Conveyor. The front conveyor belt is 2 ply 800mm (32 ) wide chevron and transfers the fine material to a stockpiler or a stockpile. The conveyor is driven by an OMT 315 motor which transmits torque to the head drum by means of a HRC coupling arrangement. The front conveyor can be folded, which allows it to be retracted close to the powerunit for transportation. Hinging Hopper Extension. A hinging hopper extension can be fitted to the Trommel 615. Any side of this extension can be hinged down to give a lower loading height, depending on which side the machine is being loaded from. The hopper extension dramatically increases the capacity of the hopper. The hopper extension when fitted to the machine is still below the 4m transport height restriction. This makes the machine a most mobile unit. Range of meshes - including Punched Plate & rubber coated Punched Plate. Remote Control Tipping Reject Grid : Round Bar (6 ), (8 ), (10 ), (12 ) Bofor Bar (4 ), (6 ), (8 ), (10 ), (12 ) Larger Engine BF4M 1012C (100 Hp) Dust Canopy. Water Spray System. Machine Lighting (complying with EC & U.S. regulations). New Air Intake Filter System. (Cyclone Cooling Air Cleaning System). Magnetic Drums. Free Standing Magnet. Feeder Impact Bars. Sound Suppression. Drum Anti Lifters. Heavy Duty Screen Motor. ABS Brakes. TUV Specification. Heavy Duty Belts. Variable Speed Control on fines, discharge and tail conveyor. Electric/Hydraulic Machine. Extra Set of Brushes. Turbo Pre-cleaner. Cyclone pre-cleaner. T.U.V. specification. Dolly axle. Machine lighting. Impact bars on the feeder. Rubber discharge lip on drum.
Trommel 615 LL JAN. 1999 Page 4 Feeder: OPTIONS CONT'D Trommel bin cleaning system. Dust reduction, includes mist spray and dust canopy. Noise reduction, includes sound surpressed powerunit doors. Bio-gradable oil. 100 Hp engine option. Remote control swivel conveyor. Heavy duty belts. Load Sensing Valve Drum; This device eliminates overloading the drum. If the pressure in the drum circuit goes above a certain limit, the feeder will slow down until normal working pressure resumes. Thus preventing the drum from stalling. The Powerscreen Trommel 615 LL is a screening unit that arose from enquires in the recycling market. Like all the Powerscreen Trommel range, the Trommel 615 LL was developed with safety, maintenance and environmental issues to the fore. The Powerscreen Trommel 615 LL was developed to suit World-wide standards and meet all European & USA legislation on noise levels, safeguarding. etc.. The Trommel 615 LL can process a vast array of materials / aggregates some of which include compost, fertiliser, clay, ash, sand, gravel, demolition waste, yard waste, wood chips, topsoil, compost sludge, limestone, coal and mulch. The Trommel 615 low-loading machine was specially designed with a quick set-up time and high mobility in mind. The need for a ramp for loading purposes is eliminated which dramatically decreases set up time which is approximately 10 minutes. Continuous belt feed with a 3 ply 1050mm (42 ) wide conveyor belt. The conveyor belt is chain driven by an OMT 500 hydraulic motor and reduction gearbox with variable speed control to determine the feed rate. A single bladed belt scraper prevents build up of residue on the belt. Screen Drum: A 1.8m x 4.57m (6' x 15') screen, generating a screening area of 19m sq. (24.8yd2). is chain driven by an OMT 500 motor. The revolutions of the drum can be altered for different applications by means of a variable speed control. All fifteen meshes. [1,200mm x 1,175mm (4 x 3 10 )] meshes are available in a large range of apertures depending on the size of fines required. The meshes are cleansed by a set of nylon brushes, which are adjustable to ensure efficient cleaning. The tumbling action of the drum breaks any dirt or loose particles from the material thus ensuring a much cleaner and solid oversize. All Powerscreen Trommels come standard with machined rolled surfaces for support wheels, in turn this eliminates all vibrations.
Trommel 615 LL JAN. 1999 Page 5 Collection Conveyor: The collection conveyor belt is a 2 ply 1050mm (42") wide belt that carries the fine material from under the screen and transports it evenly onto the front conveyor. This conveyor is driven by an OMT 500 motor, which transmits torque to the head drum by means of a HRC coupling. A belt scraper again provides protection against residue build up on the belt. Standard Front Conveyor: The front conveyor is a 2 ply 800mm (32") wide chevron belt and transfers the fine material to a stockpile. The conveyor is driven by an OMT 315 motor, which transmits torque to the head drum by means of a HRC coupling arrangement. A hexagonal roller is mounted at the head of this conveyor and acts as a cleaning devise for the belt. This conveyor is raised and lowered into working and transport position with the aid of two rams. Powerunit: The engine is a Deutz air cooled diesel engine BF4L 1011F or the BF4M1012C which is optional. As well as the engine the powerunit consists of a hydraulic tank, hydraulic oil cooler, diesel tank, hydraulic pumps, hydraulic control valves and an auxiliary 4 bank control valve. All equipment is fully protected by a automatic shut-down system with warning lights indicating the source of the problem.
Trommel 615 LL JAN. 1999 Page 6 Swivel Conveyor Option: Working Length (With Tail & Swivel Conveyor):- 23.431m (76'10 ) Towing Length (With Tail & Swivel Conveyor):- 13.128m (43' 1 ) Working Width:- 2.548m (8' 4 ) Towing Width:- 2.548m (8' 2 ) Working Height:- 4.640 (15' 3 ) Towing Height:- 4.00m (12' 8 ) Hopper Loading Height (without hopper extension):- 29.94mm (9 9 ) Hopper Opening Size (c/w hopper Extension):- 4570mm x 2565mm (13 x 8 5 ) Total Maximum Weight:- 22,000kg (48,501 lbs) Total Maximum on Axle Bogie:- 14,000 kg (30,864 lbs) Total Maximum on King Pin:- 8,000 kg (17636 lbs) Screen Unit: Screen Diameter:- 1.829m (6') Screen Length:- 4.572m (15') Hopper Capacity (without Hopper Extension):- 3.5m³ (3.924 yd3) Hopper Capacity c/w Hopper Extension:- 7m³ 7.848 yd3) Powerunit: Engine Size:- BF4L1011F 48 kw (64 Hp) Fuel Consumption (@ 2300 rpm:) 18.3 It/hr (4 gals/hr) Diesel Tank Capacity:- 318 Its. (70 gals) Hydraulic Tank Capacity:- 665 Its. (147 gals) Belt Width on Standard Machine: Feeder Conveyor:- 1050mm (42") Collection Conveyor(Chevron):- 1050mm (42") Front Conveyor:- 800mm (32") Tail Conveyor:- 900mm (36") Optional Front Conveyors: Radial Front Conveyor (Chevron):- 800mm (32") Radial Front Conveyor Discharge Height:- 4378mm (14 4 ) Extended Front Conveyor:- 900mm (36 ) Extended Front Conveyor Discharge Height:- 3960mm (12 11 )
Trommel 615 LL JAN. 1999 Page 7 Discharge Heights: Tail Conveyor:- 3294mm (10 9 ) Front Conveyor Discharge Height:- 2685mm (8 8 ) Wheels: Tyre Size:- 245 / 70 R19.5 Tyre Pressure:- 9.8 bar (140 psi) Wheel Stud Torque:- 745 Nm (550 lbs ft)
Trommel 615 LL JAN. 1999 Page 8
Trommel 615 LL JAN. 1999 Page 9
Trommel 615 LL JAN. 1999 Page 10
Trommel 615 LL JAN. 1999 Page 11
Trommel 615 LL JAN. 1999 Page 12
Trommel 615 LL JAN. 1999 Page 13
Trommel 615 LL JAN. 1999 Page 14
Trommel 615 LL JAN. 1999 Page 15