DATA SHEET: DomiLED TM InGaN White : DDW-LJG DomiLED TM With the intense colors that seem to glow with energy and its significant brightness, DomiLED TM white LED is a highly reliable design device. Its dynamic nature makes it perfect choice for lighthing applications, office and home applications and standard industrial applications. Features: > High brightness surface mount LED. > Based on InGaN technology. > 120 viewing angle. > Small package outline (LxWxH) of 3.2 x 2.8 x 1.8mm. > Qualified according to JEDEC moisture sensitivity Level 2. > Compatible to IR reflow soldering. > Environmental friendly; RoHS compliance. > Compliance to automotive standard; AEC-Q101. Applications: > Automotive: interior applications, eg: switches, telematics, climate control system, dashboard, etc. > Consumer appliances: LCD illumination as in PDAs, LCD TV. > Communication: mobile phone flash light, backlights in mobile phone display. > Display: full color display video notice board. > Industrial: general lighting 2005 DomiLED is a trademark of. All rights reserved. Product specifications are subject to change without notice. 1
Optical Characteristics at Tj=25 0 C Part Ordering Number Color Viewing Angle Luminous Intensity @ IF = 20mA IV (mcd) Min. Typ. Max. Luminous Flux Typ. DDW-LJG-WX1-1 DDW-LJG-W2X-1 White White 120 120 1125.0 1400.0 1800.0 2240.0 2240.0 2850.0 5250.0 6534.0 NOTE 1. All part number above comes in a quantity of 2000 units per reel. 2. Luminous intensity is measured with an accuracy of ± 11%. 3. Color binning is carried for all units as per the color binning table. Only one color group is allowed for each reel. 4. InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performace Current pushing should is used for dimming purposes. Electrical Characteristics at Tj=25 0 C Vf @ If = 20 ma Vr @ Ir = 10 µa Part Number Min. (V) Typ. (V) Max. (V) Min. (V) DDW-LJG 2.8 3.2 3.6 5.0 Forward Voltage, Vf is measured with an accuracy of ± 0.1 V. Absolute Maximum Ratings DC forward current Maximum Value 30 Unit ma Peak pulse current; (tp 10µs, Duty cycle = 0.10) 100 ma Reverse voltage; Ir max = 10µA 5 V ESD threshold (HBM) 2000 V LED junction temperature 125 C Operating temperature -40 +100 C Storage temperature -40 +100 C Power dissipation (at room temperature) 110 mw Thermal resistance - Junction / ambient, R th JA - Junction / solder point, R th JS (Mounting on FR4 PCB, pad size >= 16 mm2 per pad) 340 180 K/W K/W 2
Characteristics Symbol Part Number Value Unit Temperature coefficient of V F (typ) I F = 20mA; 0 C <= T <= 85 C TC V DDW-LJG -5.40 mv / K Temperature coefficient of I V (typ) I F = 20mA; 0 C <= T <= 85 C TC IV DDW-LJG -0.21 % / K Temperature coefficient of (typ) I F = 20mA; 0 C <= T <= 85 C TC DDW-LJG -0.0001 Temperature coefficient of (typ) I F = 20mA; 0 C <= T <= 85 C TC DDW-LJG -0.0001 3
DDW, White Color Grouping 0.3900 White Bin Structure 0.3800 0.3700 0.3600 0.3500 NL OL OK PL PK 0.3300 0.3200 ML NK 0.3100 LL MK 0.3000 0.2800 JL KL KK LK 0.2700 JK 0.2600 0.2500 0.2400 0.2300 0.2700 0.2800 0.3000 0.3100 0.3200 0.3300 0.3500 0.3600 0.3700 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. Bin JK JL KK KL NK NL OK OL LK LL 1 2 3 4 0.2960 0.2590 0.291 0.2680 0.3045 0.2715 0.3005 0.2825 0.3288 0.3081 0.3288 0.3282 0.3235 0.3426 0.3100 0.2970 0.3070 0.3120 0.2910 0.2680 0.2850 0.2790 0.3005 0.2825 0.2960 0.2955 0.3288 0.3282 0.3288 0.3453 0.3426 0.3591 0.3197 0.3131 0.3189 0.3302 0.3005 0.2825 0.2960 0.2955 0.3100 0.2970 0.3070 0.3120 0.3426 0.3591 0.3484 0.3571 0.3484 0.3730 0.3205 0.2956 0.3197 0.3131 0.3045 0.2715 0.3005 0.2825 0.3130 0.2840 0.3100 0.2970 0.3235 0.3426 0.3484 0.3388 0.3484 0.3571 0.3130 0.2840 0.3100 0.2970 4
Bin MK ML PK PL 1 2 3 4 0.3197 0.3131 0.3189 0.3302 0.3484 0.3388 0.3484 0.3571 0.3288 0.3282 0.3288 0.3452 0.3484 0.3571 0.3484 0.3730 0.3288 0.3081 0.3288 0.3282 0.3582 0.3715 0.3582 0.3792 0.3205 0.2956 0.3197 0.3131 0.3582 0.3542 0.3582 0.3715 InGaN wavelength is very sensitive to drive current. Operating at lower current is not recommended and may yield unpredictable performance. Current pulsing should be used for dimming purposes. 5
DDW, White Color Grouping 0.44 White Bin Structure 0.42 0.40 0.38 0.36 0.34 0.32 0.30 A1 A3 A4 C1 C2 C3 C4 E1 E2 E3 E4 0.28 A2 0.26 0.24 0.22 0.20 0.18 0.16 0.26 0.28 0.30 0.32 0.34 0.36 Chromaticity coordinate groups are measured with an accuracy of ± 0.01. Bin A1 A2 A3 A4 C1 C2 C3 C4 E1 E2 E3 E4 1 2 3 4 0.2775 0.2732 0.2775 0.2557 0.2939 0.2764 0.3025 0.3146 0.3025 0.2971 0.3150 0.3354 0.3150 0.3179 0.3275 0.3561 0.3275 0.3768 0.3593 0.2939 0.2764 0.3025 0.3146 0.3025 0.2971 0.3150 0.3354 0.3150 0.3179 0.3275 0.3561 0.3275 0.3768 0.3593 0.3525 0.3975 0.3525 0.3800 0.3114 0.2939 0.3025 0.3321 0.3025 0.3146 0.3150 0.3529 0.3150 0.3354 0.3275 0.3736 0.3275 0.3561 0.3943 0.3768 0.3525 0.4150 0.3525 0.3975 0.2775 0.2907 0.2775 0.2732 0.3114 0.2939 0.3025 0.3321 0.3025 0.3146 0.3150 0.3529 0.3150 0.3354 0.3275 0.3736 0.3275 0.3561 0.3943 0.3768 6
Luminous Intensity Group at Tj=25 C Brightness Group W1 W2 X1 X2 Luminous intensity is measured with an accuracy of ± 11%. Luminous Intensity IV (mcd) 1125.0... 1400.0 1400.0... 1800.0 1800.0... 2240.0 2240.0... 2850.0 Vf Binning (Optional) Vf Bin @ 20mA V1 Group Forward Wavelength Voltage (V) distribution (nm) 2.75... 3.05 V2 3.05... 3.35 V3 3.35... 3.65 Forward voltage, Vf is measured with an accuracy of ± 0.1 V. Please consult sales and marketing for special part number to incorporate Vf binning. 7
ΔCX, Δ CY TM Relative Luminous Intensity Vs Forward Current Forward Current Vs Forward Voltage Relative Intensity; Normalized at 20mA 2.2 2 1.8 1.6 1.4 1.2 1 0.8 0.6 0.4 0.2 0 0 10 20 30 40 40 50 50 Forward Current; ma 50 40 30 20 10 0 2 2.5 3 3.5 4 Forward Current, ma Forward Voltage; V Forward Current Vs Ambient Temperature Relative Intensity Vs Wavelength 35 1 Forward Current; ma 30 25 20 15 10 5 Relative Intensity 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 0 0 10 20 30 40 50 60 70 80 90 100 400 450 500 550 600 650 700 750 Ambient Temperature Wavelength; nm 0.03 Chromaticity Coordinate Shift 1000 Allowable Forward Current Vs Duty Ratio ( Ta=25 Deg C, tp 10uS ) 0.02 0.01 0-0.01-0.02-0.03 0 5 10 15 20 25 30 Allowable Forward Current ( ma ) 100 10 0.1 1 10 100 Duty Ratio, % 8
Radiation Pattern 30 20 10 0 1.0 40 0.8 50 0.6 60 0.4 70 0.2 80 90 0 9
DomiLED TM Package Outlines Material Material Lead-frame Cu Alloy With Ag Plating Package High Temperature Resistant Plastic, PPA Encapsulant Silicone Resin Soldering Leads Sn-Sn Plating 10
Recommended Solder Pad 11
Taping and orientation Reels come in quantity of 2000 units. Reel diameter is 180 mm. 12
Packaging Specification 13
Packaging Specification Moisture sensitivity level Barcode label (L) Lot No : lotno (P) Part No : partno (C) Cust No : partno ML TEMP 2 260 C RoHS Compliant (Q) Quantity : quantity (G) Grouping : group (D) D/C : date code Made in Malaysia (S) S/N : serial no Moisture absorbent material + Moisture indicator Reel Label The reel, moisture absorbent material and moisture indicator are sealed inside the moisture proof foil bag Average 1pc DomiLED/Multi DomiLED 1 completed bag (2000pcs) Weight (gram) 0.034 190 240 ± 10 TM Cardboard Box For DomiLED TM Cardboard Box Size Dimensions (mm) Empty Box Weight (kg) Reel / Box Super Small 325 x 225 x 190 0.38 9 reels MAX Small 325 x 225 x 280 0.54 15 reels MAX Medium 570 x 440 x 230 1.46 60 reels MAX Large 570 x 440 x 460 1.92 120 reels MAX 14
Recommended Pb-free Soldering Profile Classification Reflow Profile (JEDEC J-STD-020C) 300 275 255-260 C 10-30s 250 225 217 C Ramp-up 3 C/sec max. Temperature ( C) 200 175 150 125 100 75 Preheat 60-180s 50 480s max 25 0 50 100 150 200 Time (sec) 60-150s Rampdown 6 C/sec max. 15
Revision History Page - 2 5 2 7 6 3, 8 8 1, 14 Subjects Initial Release Add Thermal Resistance Update Color Bin Structure Add new partno: DDW-LJG-W2X-1 Update graph: Relative Luminous Intensity Vs Forward Current Add Vf Binning Add Characteristic Add Graph: Chromaticity Coordinate Shift Add Graph: Allowable Forward Current Vs Duty Ratio Add Features Update Packaging Specification Date of Modification 18 Apr 2012 06 Jun 2012 19 Dec 2012 26 Jun 2013 13 Sep 2013 09 Jan 2014 24 Mar 2014 04 Aug 2014 16 Oct 2015 NOTE All the information contained in this document is considered to be reliable at the time of publishing. However, does not assume any liability arising out of the application or use of any product described herein. reserves the right to make changes at to any products in order to improve reliability, function or design. products are not authorized for use as critical components in life support devices or systems without the express written approval from the Managing Director of. 16
About Us is a dynamic Malaysian Corporation that is among the world s leading SMT LED Manufacturers. An excellence driven organization, it offers a comprehensive product range for diverse industries and applications. Featuring an internationally certifi ed quality assurance acclaim, s extra bright LEDs are perfectly suited for various lighting applications in the automotive, consumer and communications as well as industrial sectors. With extensive industry experience and relentless pursuit of innovation, s state-of-art manufacturing, research and testing capabilities have become a trusted and reliable brand across the globe. More information about can be found on the Internet at http://www.dominant-semi.com. Please contact us for more information: Head Quarter Sdn. Bhd Lot 6, Batu Berendam, FTZ Phase III, 75350 Melaka, Malaysia. Tel: +606 283 3566 Fax: +606 283 0566 E-mail: sales@dominant-semi.com TM