Products
Table of Contents MOLD DTE & RECYCLING INSERTS Date Inserts...1 Double Date Stamp...2 Date Stamp Plus...3 Temperature Dater & Temperature Insert... Block Base & Block Insert...5 Interchangeable Insert...6 Reference & Mark Insert...7 EJECTION Plate ccelerator...8 Modular Retainer...9 ccelerated Ejector...10 Ejector Pin Base...11 Headless Ejector Pin & Sleeve...12 Safety Stopper & Shock bsorber...13 UNDERCUTS Sprung Core...1 Sprung Core Extension...15 Flexible Core...16 Double Ejector...17 Tulip Ejector...18 Standard Lifter...19 Vertical Lifter Block...20 SLIDES Core Cam...21 Compact Coring Unit...22 Slide Retainer...23 utomatic Retainer...2
Date Inserts J C L Month Insert Day Shift Year C J L DS 022-xx DP 2275-xx DS 0-03 DS 0-Y-xx 2.2 7.5 12 DS 0530-xx DP 3075-xx DS 05-31L DS 05-03 DS 05-Y-xx 5 3.0 7.5 12 DS 0632-xx DP 3217-xx DS 06-31L DS 06-03 DS 06-Y-xx 6 3.2 17.0 20 DS 087-xx DP 717-xx DS 08-31L DS 08-03 DS 08-Y-xx 8.7 17.0 20 DS 1057-xx DP 5717-xx DS 10-31L DS 10-03 DS 10-Y-xx 10 5.7 17.0 20 DS 1267-xx DP 6717-xx DS 12-31L DS 12-03 DS 12-Y-xx 12 6.7 17.0 20 DS 1687-xx DP 8717-xx DS 16-31L DS 16-03 DS 16-Y-xx 16 8.7 17.0 20 DS 20107-xx DP 10717-xx DS 20-31L DS 20-03 DS 20-Y-xx 20 10.7 17.0 20 Note: Mold operating temperature should not exceed 150 C (300 F). When ordering add year to the end of the part number i.e. DS 0632-1 or for assembly with arrow only i.e. DS 0632 C J Engraving Depth Inches Size Characters rrow Head rrow Body 3 mm.00 -.008.016 -.020.016 -.020-5 mm.00 -.006.016 -.020.016 -.022 6 mm.00 -.008.016 -.020.016 -.020 8 mm.006 -.010.016 -.020.016 -.020 10-16 mm.008 -.012.020 -.02.020 -.02 20 mm.008 -.012.020 -.02.020 -.02 Center Insert With rrow & Year Part Number C J DP 2275-xx 2.2 7.5 DP 3075-xx 3.0 7.5 DP 3217-xx 3.2 17.0 DP 717-xx.7 17.0 DP 5717-xx 5.7 17.0 DP 6717-xx 6.7 17.0 DP 8717-xx 8.7 17.0 DP 10717-xx 10.7 17.0 Note: When ordering add year to the end of the part number i.e. DP 3217-1 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299 1
05 Double Date Stamp Blank 20-0.05 ±0.050 12 +1 ø m6 øb øc ø g6 12 Months +Years 06 07 08 12 09 11 10 10 N N = # of years Turn counter clockwise to change outer information. Bronze Turn clockwise to change inner information. 20 +0.1 øe ø H7 Part Number B C E N FD 080512-xx 8 5.5 3 6 5 FD 120812-xx 12 8 10 6 FD 161012-xx 16 10.5 5.3 12 10 Note: When ordering add the two digit year to the end of the part number i.e. FD 120812-1 2 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299
Date Stamp Plus L -0.05 0.050 D ø m6 øc ø g6 12 Months 12 Months + Year Years Blank 12 Months rrow Only 12 Months + Yr. Years Blank mm C mm D mm DSFP 022 DSFP 022-xx DSFP 0-Yxx DSFP 0BLNK- 2.2 5.5 12 DSFP 0530 DSFP 0530-xx DSFP 05-Yxx DSFP 05BLNK- 5 3 5.5 12 DSFP 0632 DSFP 0632-xx DSFP 06-Yxx DSFP 06BLNK- 6 3.2 8 20 DSFP 087 DSFP 087-xx DSFP 08-Yxx DSFP 08BLNK- 8.7 8 20 DSFP 1057 DSFP 1057-xx DSFP 10-Yxx DSFP 10BLNK- 10 5.7 8 20 DSFP 1267 DSFP 1267-xx DSFP 12-Yxx DSFP 12BLNK- 12 6.7 8 20 DSFP 1687 DSFP 1687-xx DSFP 16-Yxx DSFP 16BLNK- 16 8.7 8 20 DSFP 20107 DSFP 20107-xx DSFP 20-Yxx DSFP 20BLNK- 20 10.7 8 20 Note: When ordering add year to the end of part number (DSFP 022-1) (DSFP 06-Y1). Use PCS/CUMS Standard Inserts for replacements (DP 3217/DP 3217-15) L mm The set includes 8 parts, one for each DSFP diameter Part Number EF32205-SET Part Description Removal jig extractor Note: The Removal Jig extractor was made exclusively for removal of the Date Stamp Plus. Do not use with standard Date Stamps. Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299 3
Temperature Dater & Insert ø g6 ±0.050 øc 22-0.05 8-0.05 ø2 øb -0.1 12 Months D 12 Months + Year Years 950HV 0.3 N # of years Part Number 12 mo. + Year Years B C D N FT 087SF FT 08712-xx FT 08705-xx 8 12.7 11 5 FT 1267SF FT 126712-xx FT 126708-xx 12 16 6.7 12 8 Note: When ordering add the two digit year to the end of the part number i.e. FT 08712-1 øc -0.02 19 Extension de la gamme des dateu 3 ou information rrow Pas de perte de tem only Year Garantie qu il est possible d interc l insert grâce au mecanisme inter rrow only Year C IT 719SF IT 719-xx.7 IT 6719SF IT 6719-xx 6.7 IMPORTNT 950HV 0.3 1 2 IMPORTNT IMPORTNT Note: When ordering add the two digit year to the end of the part number i.e. IT 719-1 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299
Block Base & Block Insert MT. INOX. 1.03 Hardened 8/5Rc standardized information position rs. hanger ne. Inserts 2 1 Logos 3 1 IMPORTNT 16 +0.1 Bronze 2 ø H7 5 øe Reference C PM 0615-xx 6.5 PM 0915-xx 8.7 PM 1115-xx 11.5 Part Number C E No. of PM BM 160603 16 6.5 8 3 BM 18060 18 6.5 8 BM 220903 22 8.7 10 3 BM 25090 25 8.7 10 BM 281103 28 11.5 12 3 BM 32110 32 11.5 12 Note: When ordering add the desired number after the reference. Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299 5
Interchangeable Insert 12-0.05 3 9 ø g6 ø3 ø m6 II BI Part Number E Reference BI 101209 10 6 II 101203 BI 121209 12 8 II 121203 BI 161209 16 10 II 161203 6 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299
Reference & Mark Insert 0.15 +0.1 H +1 S ø m6 ø g6 K B -0.05 01 02 03 0 05 06 07 Part Number B E H K S IR 1012-xx 10 12 8 7 1.5 5.6 IR 1212-xx 12 12 10 7 1.8 6.8 IR 1616-xx 16 16 12 9 2. 9 IR 2016-xx 20 16 16 9 3.2 11.5 Note: When ordering add the desired recycle number after the reference i.e. IR 1012-01 1 0.15 +0.1 H +1 2 Bronze ø m6 ø g6 B +0.1 B -0.05 øe ø H7 3 Part Number B E H IM 01000 10 2 6 IM 051000 5 10 3 6 IM 061000 6 10 6 IM 081200 8 12 6 7 IM 101200 10 12 8 7 IM 121200 12 12 10 7 IM 161600 16 16 12 9 IM 201600 20 16 16 9 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299 7
Plate ccelerator øb E T DIN 912 L max. H max. FG G D P DIN 6325 M Hard. 58 ± 2 HRC. C ±0.2 Max. N Mat. 1.0503 Part Number B C D E F G H Max. L Max. M N P T Max. Force EP 200813 20 8 13.2 25.8 9. 11. 6 13.6 5.5 5 15 Ø 2.5 x 10 M3 x 12 125 kg EP 251016 25 10 16 32.3 11.8 1.3 7 17 6.8 6 18.5 Ø 3 x 12 M x 16 250 kg EP 371522 37.5 15 22 8.5 17.7 21.5 10.5 25.5 10.2 8 25 Ø x 16 M6 x 25 350 kg EP 502030 50 20 30 6.6 23.6 28.6 1 3 13.6 10 3 Ø 5 x 20 M8 x 30 800 kg 8 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299
Modular Retainer 2.5 3 ø8 DIN6325 M8 DIN912 ø8 DIN6325 K Friction rea Hard. 58 ± 2 HRC. 16 K=pproximate resistance value that can be obtained by grouping clips. 60 16 8 65 K*1 RM=7.5 kg K*2 RM=15 kg K*3 RM=22.5 kg K* RM=30 kg Closed mold st 1 Opening nd 2 Opening Part Number K1 K2 K3 K RM 651608 7.5 kg 15 kg 22.5 kg 30 kg Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299 9
ccelerated Ejector +0.5 N ød øp (*) G Q -0.05 øb øe 22 R M ø øc g6 Mat. BRSS J K ød +3 L M +0.1 IMPORTNT øf Part Number B C D E F G J K L M N P Q R E 031620 3 16 20 12.5 22 13 1 8 32 22 17 37-3 E 01620 16 20 12.5 22 13 1 8 32 22 17 37-3 E 05230 5 2 30 16 3 16 20 15 36 27 57 2 3 E 06230 6 2 30 16 3 16 20 15 36 27 57 2 3 E 08230 8 2 30 17 3 17 20 15 36 27 57 2 3 E 103036 10 30 36 21.5 0 21 28 20 62 6 3 78 2 6 E 123036 12 30 36 21.5 0 21 28 20 62 6 3 78 2 6 *Possibility to key for using a curved ejector pin. (except E 031620 & E 01620) 10 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299
Ejector Pin Base 5 3 1 T 2 Part Number B C D CR (N) BE 031115 - - 3 11 15 - > 2.550 BE 01216 - - 12 16 - > 2.550 BE 051317 - - 5 13 17 - > 3.800 - B 06118 BT 06118 6 1 18 3.5 > 3.800 - B 081620 BT 081620 8 16 20 5.5 > 5.100 - B 101822 BT 101822 10 18 22 7 > 6.00 - B 12202 BT 12202 12 20 2 9 > 7.600 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299 11
Headless Ejector Pin & Sleeve BE-B-BT 2.5 Ø g6 ± L 3 60 ± 2HRC Part Number L 600 800 1000 VE 030... 3 VE 00... VE 050... 5 VE 060... 6 VE 080... 8 VE 100... 10 VE 120... 12 Note: When ordering indicate the desired L dimension after the reference part. BT B-BT 2.5 Ø0.016/10 E 1.6 ØB H6 Ø g6 100 N/mm 2 950HV 0.3 Part Number B E S L 00 500 600 800 TE 063... 6 3 3.2 30 TE 085... 8 5 5.2 35 TE 106... 10 6 6.2 0 TE 128... 12 8 8.2 5 Note: When ordering indicate the desired L dimension after the reference part. ± L 3 F 12 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299
Safety Stopper & Shock bsorber ø22 60N -0.1 20N Magnetic rea (NeFeBo) Part Number TM 10221 10 TM 12221 12.5 TM 15221 15 TM 20221 20 B-BE-BT TM T Part Number T 280806 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299 13
Sprung Core L +2 90º 0.5 0.5 E C ±1 K ±0.2 D 6º +0.1 FP ø g6 T CS Mat. Bronze B +0.1 W 15xøG Hard. 58 ± 2 HRC. Min. 1 R 0.1 IMPORTNT øu +0.2 V +0.1 IMPORTNT Max. M Max. N Min. C 0.1 Min. 2º R ø +0.1 0.5 ø +0.5 Max. C T Part Number B C D E G K L M N R T U V W CS PW 060622 6 6.2 22 9 3.5-3.5 125 16 18 1.25 Mx36 12 5 Mx16 - PW 060630 6 6.2 30 10 3.5 12.5 175 20 26 1.25 Mx36 12 5 Mx16 PW 060822 6 8.2 22 9 3.5-3.5 125 16 18 1.25 Mx36 12 5 Mx16 - PW 060830 6 8.2 30 10 3.5 12.5 175 20 26 1.25 Mx36 12 5 Mx16 PW 080825 8 8.2 25 11.5.5 -.5 10 18 21 2 M5x36 1 6 M5x16 - PW 081025 8 10.2 25 11.5.5 -.5 10 18 21 2 M5x36 1 6 M5x16 - PW 081030 8 10.2 30 11.2.5 12.5 175 20 26 2 M5x36 1 6 M5x16 PW 081225 8 12.2 25 11.5.5 -.5 10 18 21 2 M5x36 1 6 M5x16 - PW 081230 8 12.2 30 11.2.5 12.5 175 20 26 2 M5x36 1 6 M5x16 PW 10130 10 1.2 30 13.6 5.5 16 5.5 175 20 26 2.5 M6x36 18 8 M6x16 PW 101630 10 16.2 30 13.6 5.5 16 5.5 175 20 26 2.5 M6x36 18 8 M6x16 PW 101830 10 18.2 30 13.6 5.5 16 5.5 175 20 26 2.5 M6x36 18 8 M6x16 1 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299
Sprung Core Extension 155 +2 15 øc ø g6 0.5 90º 150 T V S øu -0.2 T V +0.5 +0.1 +1 ø øu +0.2 R ø +0.1 0.5 Part Number C R S T U V P 080615 8 6 1.25 9.5 x 2 M 1 5 P 100815 10 8 2 11.5 x 2 M5 16 6 P 121015 12 10 2.5 1.5 x 2.5 M6 20 8 Note: Enables a standard length of the PW up to 315 mm Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299 15
Flexible Core -0.02 R 0.15 2.5 øb -0.2 G -0.05 L ±2 C -0.02 Hard. Part Number B C G H L M N P R Balinit C Hardness PF 0150 8 2 6 5 150 12 1 0.8 30 52 ± 2HRC. PF 05150 5 8 2 6 6 150 12 1 0.8 30 52 ± 2HRC. PF 06200 6 12 30 8 7 200 18 20 1 36 52 ± 2HRC. PF 062WB 6 12 30 8 7 200 18 20 1 36-58 ± 2HRC. PF 08200 8 1 30 8 9 200 18 20 1 36 52 ± 2HRC. PF 082WB 8 1 30 8 9 200 18 20 1 36-58 ± 2HRC. PF 10200 10 16 30 8 11 200 18 20 1 36 52 ± 2HRC. PF 102WB 10 16 30 8 11 200 18 20 1 36-58 ± 2HRC. PF 12200 12 18 30 8 13 200 18 20 1 36 52 ± 2HRC. PF 122WB 12 18 30 8 13 200 18 20 1 36-58 ± 2HRC. 16 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299
Double Ejector 200 +2 8 1 1 U + 2 Min.V 3 Mat. 1.3505 Hard. 58 ± 2 HRC. -0.02 øb g6 R 0.15 øg x M0.75 øe -0.2 16 8-0.05 ød g6 øc -0.05 6-0.05 30 Hard. 52 ± 2 HRC. 3 85 ød H7 R 0.1 IMPORTNT 8 +0.05 5º 0.1 IMPORTNT Max. 18 Min. 1 Max. 20 øe +0.5 øh +0.5 Min. 30 øg +1 Part Number B C D E G H U V ED 068200 6 12 1 10 1 6 10 0.5 10 ED 088200 8 1 16 12 16 8 12 0.5 10 ED 108200 10 16 18 1 18 8 1 0.5 15 ED 128200 12 16 18 16 20 8 15 0.5 15 Note: Special lengths of 275 mm and 350 mm upon request Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299 17
Tulip Ejector 175 +2 1 U + 2 Min.V 3 36 ø øb g6 85 øe Max. 6-0.05 10-0.2 ø x M0.75 ød øc -0.05 Hard. 52 ± 2 HRC. 2.8 Mat. 1.3505 Hard. 58 ± 2 HRC. R 0.1 IMPORTNT ø H7 IMPORTNT 0.1 5º 5º Max. 18 10 +0.05 øh +0.5 ød +0.5 Min. 30 øh +0.5 T Part Number B C D E H U V EE 060175 6 10 12 12-9 0.5 10 EE 082175 8 12 1 1 2 11 0.5 10 EE 103175 10 1 16 16 3 13 0.5 15 EE 12175 12 16 18 18 15 0.5 15 EE 168175 16 20 22 22 8 19 1 20 Note: Special lengths of 275 mm and 350 mm upon request ø +1 18 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299
Standard Lifter 250 +2 G ød øb -0.5 øb g6 øc 1 (max.90) + 12 8-0.05 0 Mat. 1.23 Hard. 52 ± 2 HRC. 2.7 IMPORTNT Max. 25 T 26 Max. Ejection stroke Part Number B C D G T U V R PS 062250 6.2 10 12 6 3. M x 16 12 5 1.25 PS 082250 8.2 12 1 6 M x 16 12 5 1.25 PS 102250 10.2 1 16 8.2 M5 x 16 1 6 2 PS 122250 12.2 16 18 8.2 M5 x 16 1 6 2 0 To adjust V +0.1 øu +0.2 R Ref.f or ød 0.5 RP.10000 PS.102250 T Lifter Replacement For RP 06000 PS 062250 RP 08000 PS 082550 RP 10000 PS 102250 RP 12000 PS 122250 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299 19
Vertical Lifter Block C Mat. 1.282 Hard. 56 ± 2 HRC. 15 36 52-0.05 EV M6x25 DIN912 6 M6x10 L +2 D 10 85 E øg -0.2 øf x M0.75 R 0.15 g6 B g6 3 Mold Closed 7 Mold Open Max. 26 TM 1 øh +0.5 2 Part Number B C D E PV 31252 3 12 28 15.5 27 PV 361652 36 16 30 16.5 29 PV 382052 38 20 32 17.5 31 PV 0252 0 2 3 18.5 33 Part Number F G H EV 006225 6 12 6.5 EV 008225 8 1 8.5 EV 010225 10 16 10.5 EV 012225 12 18 12.5 Note: EV must be ordered separately 20 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299
Core Cam Standard stroke of.2mm..2 7.8 16-0.1 2-0.05 ISO 1023 V20-25 30-1 Ref. ø23.8-0.2 easier due to always being in 90 to parting line. Retraction Force 0 Kg. R. 32 g6 22 M5x30 conventional solutions. 12.8 +0.1 6 +0.1 11 32 g6 to the molder. Option for machining keyway. 6. 18 2 1 50 +1 Part Number UC 3255 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299 21
Compact Coring Unit 1 10 Mat. 1.2379 Hard. 58 ± 2 HRC 8 ISO 1023 V 20 2 36-0.05 2 R6 Standard stroke of mm 36-0.05 16-0.05 mm part thickness. 0.5-0.1 ø5 DIN1530 mold, all installation is contained on one half of the mold. 5-0.1 ø10 x 6 Option for machining keyway. 20.5 ø10.5 +0.5 M5x25 DIN912 Part Number U 363616 22 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299
Slide Retainer Material 1.8159 Hardened 5 ± 3HRC Maximum working temperature 150 C Patented System C DIN7979 E B R 0.5 F T DIN7991 K Friction rea Hard. 58 ± 2 HRC. K=Force to release the RC Part Number B C E F G H K R T RC 123006 12 30 6 x 20 21 5 16 5 kg 6 M5 x 6 RC 16008 16 0 8 x 20 28 6 5 15 7 kg 8 M6 x 25 RC 205010 20 50 10 x 2 3 8 6 17 1 kg 10 M8 x 30 RC 26012 2 60 12 x 32 2 10 7 23 21 kg 12 M10 x 0 RC 328012 32 80 16 x 0 56 12 9 27 28 kg 16 M12 x 50 RC 328016 32 80 16 x 0 56 16 9 25 38 kg 16 M12 x 50 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299 23
utomatic Retainer 16-0.1 38-0.1 Material 1.2510 Hardened 56 ± 2HRC Patented System 18 12.5 20-0.05 ø12 g6 850 N/mm 2 M6x30 DIN912 250 +5 630HV 0.1 Mat. 1.722 Hard. 60 HRC. 2.5 10 2.5 ø18 m6 ø11.8 18 +0.5 Min.15 ø12 ø18 10 0.5 ø12 16 +0.1 Part Number R 163812 Note: Cut the rod 0.5 mm shorter than the slide height 2 Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299
Notes Phone: 800-521-056 www.pcs-company.com E-mail: sales@pcs-company.com Fax: 800-505-3299
388 Doreka Dr. Fraser, MI. 8026 CUMS 051 Phone: 1-800-521-056 Fax: 1-800-505-3299 Buy securely online at www.buyatpcs.com