Xitanium LED driver Datasheet Xitanium FULL Prog LED Xtreme drivers Xitanium FULL Prog LED Xtreme drivers Philips Xitanium Full Prograable LED drivers are specifically designed to deliver the highest performance, protection and configurability. The portfolio offers both central and standalone diing protocols further increasing the energy savings and O2 reductions achieved with LED lighting. The Xtreme technology ensures maximum robustness and protection combined with a very long lifetime. In this product family Philips introduces new drivers in a compact form factor with state-of-the-art features, which offer high value for both OEM customers and end-users. The products can replace the existing prograable outdoor LED drivers and will bring significant improvement in prograing, assembly into a luminaire and electrical performance. enefits Features Application Ultimate robustness, offering peace of mind and lower High surge iunity (M/DM) Road and street lighting Long lifetime and robust protection against moisture, vibration and temperature Area lighting onfigurable operating windows (AO) Tunnel lighting Multiple control interfaces: DALI, AmpDim, 1-step and 3-step LineSwitch Industrial lighting maintenance costs Fully prograable LED-drivers designed for the new digital and connected lighting world Extended diagnostics via MultiOne Autonomous diing via integrated DynaDier Easy to design-in, configure and install for insulation lass Adjustable thermal protection for driver (DTL, on select models) and LED module I and lass II applications Energy savings through high efficiency and via multiple diing options (MTP) onstant Light Output (LO) Adjustable Start-up Time (AST) Adjustable Light Output (ALO) End-Of-Life indicator (EOL)
Electrical input data Rated input voltage range 202...254 V ac Performance range Rated input voltage 230 V ac Rated input frequency range 47...63 Hz Performance range Rated input current 0.36 A @ rated output power @ rated input voltage Max. input current 0.41 A @ rated output power @ minimum performance input voltage Rated input power 82 W @ rated output power @ rated input voltage Power factor 0.98 @ rated output power @ rated input voltage Total harmonic distortion 7 % @ rated output power @ rated input voltage Efficiency 91.8 % @ rated output power @ rated input voltage Rated input voltage D range 186...250 V dc Performance range, external D-rated fuse required Rated input current D range 0.3 A dc Performance range Input voltage A range 80...264 V ac Safety operational range, see MainsGuard graph Input frequency A range 45...66 Hz Safety operational range Input voltage D range 168...275 V dc Safety operational range Standby Power 0.5 W Isolation input to output Electrical output data Regulation method onstant urrent Output voltage 50...150 V dc Output voltage max. 190 V Maximum voltage at open load Output current 0.053...0.7 A Output current min prograable 200 ma Output current min diing 53 ma Output current tolerance ± 3 % Output current ripple LF 4 % Ripple = peak / average @ < 1kHz Output current ripple HF 4 % Output power 2.5...75 W Electrical data controls input ontrol method AmpDim, DALI, Dynadier, Output current amplitude diing LineSwitch 3-step, LineSwitch single-step Diing range 10...100 % DALI acc. IE62386-101, -102 Ed. 2.0; LineSwitch: Vlow: < 160Vac Vhigh: 170... 264Vac Galvanic Isolation Logistical data Product name Order code 871869682506800 Logistic code 12N 9290 016 44006 Pieces per box 10 2 / 9
Wiring & onnections Input wire cross-section 0.2...1.5 2 WAGO250 (3.5 ), solid / stranded wire 16...24 AWG WAGO250 (3.5 ), solid / stranded wire Input wire strip length 8.5...9.5 Output wire cross-section 0.2...1.5 2 WAGO250 (3.5 ), solid / stranded wire 16...24 AWG WAGO250 (3.5 ), solid / stranded wire Output wire strip length 8.5...9.5 Diing wire cross-section 0.2...1.5 2 WAGO250 (3.5 ), solid / stranded wire 16...24 AWG WAGO250 (3.5 ), solid / stranded wire Diing wire strip length 8.5...9.5 Maximum cable length 2500 Maximum NT output cable length 0.6 m ISPR15: between driver and LED module Insulation Insulation Mains + LineSwitch Mains + LineSwitch EQUI LED + NT DALI asic asic EQUI LED + NT asic DALI asic 3/9
Dimensions and weight Length (A1) 241 Width (1) 59 Height (1) 38 Fixing hole diameter (D1) 4.5 Fixing hole distance (A2) 226.2 Weight 600 gram Operational temperatures and humidity Ambient temperature -40...+55 Higher ambient temperature allowed as long as Tcase-max is not Tcase-max 85 Maximum temperature measured at Tcase-point Tcase-life 75 Measured at Tcase-point Maximum housing temperature 130 In case of a failure Relative humidity 10...90 % Non-condensing Ambient temperature -40...+85 Relative humidity 5...95 % exceeded. Storage temperature and humidity 4/9 Non-condensing
Lifetime Driver lifetime 100,000 hours Measured temperature at Tcase-point is Tcase-life. Maximum failures = 10% Prograable features Remark Set output current (AO) Prograable, SimpleSet See Design-in guide. Default output current: = 700 ma LED module temperature derating (MTP) Driver Temperature Limit (DTL) onstant Lumen Over Lifetime (LO) D emergency diing (DemDIM) Diagnostics Adjustable Light Output (ALO) Ampdim LineSwitch single-step LineSwitch 3-step Adjustable Start-up Time (AST) Integrated Dynadier End Of Life indicator Default AO: 15%. EOF(x) range: 10... 60%. No external D rated fuse required 5-step, light turn-off possible Features Open load protection Short circuit protection Over power protection Hot wiring No Suitable for fixtures with protection class I and II per IE60598 Over temperature protection driver Overheating protection 5/9 Remark
ertificates and standards Approval marks / / E / EL / ENE / RM / TISI Ingress Protection classification (IP) 20 Inrush current Inrush current Ipeak 46 A Input voltage 230V Inrush current Twidth 250 µs Input voltage 230V, measured at 50% Ipeak Drivers / M 16A type 11 pcs M Rating Relative number of LED drivers 10A 63% 13A 81% 16A 100% (stated in datasheet) 20A 125% 25A 156% 10A 104% 13A 135% 16A 170% 20A 208% 25A 260% Driver touch current / protective conductor current Typical touch current (ins. lass II) < 0.3 ma peak Acc. IE61347-1. LED module contribution not included Typical protective conductor current (ins. lass I) < 0.21 ma rms Acc. IE61347-1. LED module contribution not included Mains surge iunity (diff. mode) 6 L-N, Ls-L, Ls-N, acc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us Mains surge iunity (co. mode) 10 L/N/Ls - EQUI 10 acc. EN61547; 8 acc. IE61000-4-5, 12 Ohm ontrol surge iunity (diff. mode) 0.9 DALI - DALI, acc. IE61000-4-5. 2 Ohm, 1.2/50us, 8/20us ontrol surge iunity (co. mode) 6 DALI - EQUI acc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us DALI surge iunity (co. mode) 8 DALI - L/N/Ls acc. IE61000-4-5. 12 Ohm, 1.2/50us, 8/20us Default setting Remark AO 700 ma LineSwitch ON LO OFF MTP OFF Dynadier OFF EOL OFF Surge iunity 1.2/50us,8/20us Additional information 6/9
Graphs Operating window Thermal Guard Mains Guard 7/9
Power factor versus output power Efficiency versus output power THD versus output power 8/9
2018 Philips Lighting Holding.V. All rights reserved. This document contains information relating to the Philips Lighting portfolio, intended for companies who may be interested in developing their product offering. Note that the information provided is subject to change. Philips Lighting does not give any representation or warranty as to the accuracy or completeness of the information included herein and shall not be liable for any action in reliance thereon. The information presented in this document is not intended as any coercial offer and does not form part of any quotation or contract. Date of release: May 17, 2018 v3 www.philips.com/technology