Maximum Versatility for Today s and Tomorrow s Wheels TM
TM Increase Productivity With John Bean Tire Changers! John Bean s Tire Changers are the answer to the latest needs of the modern tire service center. They are ideal for handling passenger car, light truck, and high-performance wheels found today & those of the future. The Tire Changer s combination of speed, versatility and safety translate into better wheel service and increased productivity for your business! Safety-Enhancing Features Optional Safety Restraint Arm* Positively restrains wheel and tire assembly to the tire changer during the inflation process Reduces potential for injury by the unlikely event of wheel or tire failure Simple swing-arm design easily swings in from the left Allows the technician to quickly and safely perform tire inflation without disturbing the tire changing procedure Positioning Safety Interlock Switch ensures that the SRA is centered on the wheel and tire assembly before the inflation process can begin Anti-Rotation Lock prevents the SRA from moving during the inflation process or in the event of an accidental explosion Gravity Lock engages automatically without operator intervention and ensures the wheel is secured prior to inflation Ergonomically-Positioned Bead Breaker Control Pedal is positioned away from the bead breaker with a guard, preventing the operator from accidentally stepping on and activating it while standing next to the bead breaker Integrated Pressure Limiter Stops air flow once pressure has reached 55 PSI (3.5 Bar), thereby preventing accidental tire over-inflation * Patented and/or Patent-Pending Features
Common Features Adjustable Four-Jaw Clamp Self-centering nylon-covered clamps grip securely and protect the wheel Reduced-angle jaws ensure no slippage Extra Wheel Protection Replaceable nylon inserts for demount heads prevent wheel scratching Replaceable polymer remount heads are also available for extended protection Twin-Cylinder Clamping Two powerful clamping cylinders provide uniform clamping pressure & increased clamping power Bead Breaker Provides precise power and can be toggled with the foot pedal as needed Both the stiffest and the softest sidewalls are a snap No damage to tires while loosening the bead Optional Pneumatic Bead Assist Wheel Centering Depressor Provides downward pneumatic pressure on the wheel s center when clamping Assists operator in seating the wheel clamp jaws between the tire and the wheel flange on stiff, hard-to-depress sidewalls Pneumatic Bead Assist comes standard on EHP System V and EHP System IV AT Plus only. Power Lifting Disc Lifts tire up and off the wheel flange, reducing the effort of demounting the lower bead Pressure Roller Pushes bead down, allowing the operator to position the tire tool in order to lift the bead over the mount/demount head Bead Depressor Follows the tire as it rotates, positioning the bead in the wheel s drop center for faster, easier tire mounting
EHP System V The EHP System V handles a wide range of highperformance wheel and tire assemblies, including low-profile and run-flat tires. This unit can handle 47 outer tire diameters, 16 wheel widths and also features a 26 outside clamping diameter (up to 30 with optional adapters). Advanced features, such as pneumatic locking of the mount/demount head offset, provide maximum cosmetic safety for expensive wheels and significantly reduce the risk of wheel or tire damage. The tilt-tower provides maximum clearance for technicians when placing wheel and tire assemblies into position. Pneumatic bead assist is standard. EEWH517A The EHP System V handles a wide range of high-performance wheel and tire assemblies, including low-profile and run-flat tires. EHP System IV AT Plus EEWH540AU2 This tilt-tower tire changer features 24 outside clamping standard (up to 28 with optional adapters). The EHP System IV AT Plus can handle outer tire diameters of up to 40 & wheel widths up to 15. This tire changer can handle a wide range of passenger car and light truck wheel and tire assemblies from OEM s or the aftermarket. The EHP System IV AT Plus features a unique bead-lifting tool which inserts between the tire and wheel in a single motion and exclusive laserindexing that acts as a visual guide when indexing the demount head to the wheel s edge quickly & precisely, eliminating wheel contact. Pneumatic Bead Assist is standard.
TM EHP System IV-E This tilt-tower tire changer features 24 outside clamping standard (up to 28 with optional adapters). The EHP System IV-E can handle outer tire diameters of up to 40 and wheel widths up to 15. This tire changer can handle a wide range of passenger car and light truck wheel and tire assemblies from OEM s or the aftermarket. The EHP System IV-E features pneumatic locking of the mount/demount head offset, which provides maximum cosmetic safety for expensive wheels and significantly reduces the risk of wheel or tire damage. EHP System III-E EEWH514AE Shown with Optional Safety Restraint Arm and Optional Pneumatic Bead Assist The John Bean EHP Systm III-E Swing-Arm Tire Changer is ideal for handling passenger car, light truck, and high-performance wheels found today. It features 24 outside clamping, 26 inside clamping and outer tire diameters of up to 50 (42 if used with the optional Pneumatic Bead Assist) and wheel widths up to 15. The EHP System III-E features mechanical locking of the vertical wheel offset and a large-diameter horizontal offset knob, providing maximum cosmetic safety for expensive wheels and significantly reducing risk of wheel or tire damage. (Pneumatic Bead Assist Optional) EHP System II-E EEWH513BU1 Shown with Optional Pneumatic Bead Assist The swing-arm style EHP System II-E Tire Changer can handle a wide range of wheels available today, ranging from OEM to aftermarket applications increasing your shop s flexibility and productivity. The EHP System II-E features mechanical locking of the vertical wheel offset & a large-diameter horizontal offset knob, providing maximum cosmetic safety for expensive wheels and significantly reducing risk of wheel or tire damage. The swing-arm allows thetechnician to move the mount/demount arm clear of the turntable for maximum clearance while placing wheel and tire assemblies in the mount/ demount clamping position. (Pneumatic Bead Assist Optional) EEWH512AE Shown with Optional Safety Restraint Arm
TM specifications* EHP System V EHP System IV-E/AT-Plus EHP System III-E EHP System II-E Outer-Clamping Diameter Range 12-26 10-24 10-24 10-24 Inner-Clamping Diameter Range 14-26 12-24 12-24 12-24 Maximum Wheel Width 16 15 15 12 Maximum Tire Diameter 47 40 50 40 Compressed Air Supply 110-170 PSI 110-170 PSI 110-170 PSI 110-170 PSI Tilt-Tower/Swing-Arm Config. Tilt-Tower Tilt-Tower Swing-Arm Swing-Arm Adjustable 4-Claw Wheel Clamp Yes Yes Yes Yes Integrated Bead-Seating Jets Yes Yes Yes Yes Pressure Limiter Yes Yes Yes Yes Twin Cylinder Turntable Clamping Yes Yes Yes Yes Bead Breaker Power 3,500 lbs. @ 140 PSI 3,400 lbs. @ 170 PSI 3,400 lbs. @ 170 PSI 3,400 lbs. @ 170 PSI Bead Breaker Range Position 1: 2.5-12 Single Position Single Position Single Position Position 2: 6-16.5 3-16 2-18 3-13 Recommended Floor Space 72 (W) x 78 (D) 72 (W) x 78 (D) 67 (W) x 69 (D) 62 (W) x 70 (D) Shipping Weight 1,000 lbs. 960 lbs. 805 lbs. 530 lbs. Power Requirements 120V, 1Ph, 60Hz 120V, 1Ph, 60Hz 120V, 1Ph, 60 Hz 120V, 1Ph, 60Hz * Specifications based on OEM Tires. OPTIONAL ACCESSORIES Quick Tool Exchange Kit 4028228: Allows for a quick and easy switch to Plastic Mount/Demount Head (Included standard with EHP System V only). Rim Protector ST4026853: Snaps on to rim of wheel (Use with Wave Tire Tool). +4 Clamp Extensions ST4029456: Extends outer clamping diameter to 30 (EHP System V ) or 28 (EHP System IV-E, EHP System III and EHP System II-E). Magic Bead Pusher ST4028648 (Use with Pneumatic Bead Assist). Pneumatic Bead Assist EAA0329G34B: EHP System IV-E EAA0329G33B: EHP System II-E Wave Tire Tool EAA0304G14A Protective Inserts EAA0247G15A: Protective inserts for mount/demount head Recommend this accessory be used in conjunction with Offset Mount/Demount Head (EAA0304G80A) when used with this tire changer. The World s Largest Wheel Service Equipment Company Snapon EQUIPMENT Snap-on Equipment / 309 Exchange Avenue / Conway, Arkansas 72032 U.S.A. Fax: 501-450-2085 / Toll Free: 1-800-362-4618 / International: 501-505-2739 www.snaponequipment.com/johnbean John Bean Canada / 6500 Millcreek Drive / Mississauga, Ontario L5N 2W6 Customer Service: 1-800-362-4608 / Fax: 905-826-7800 www.johnbean.ca John Bean is committed to product innovation and improvement. Therefore, specifications listed in this brochure may change without notice. 2012 Snap-on Incorporated. John Bean is a trademark of Snap-on Incorporated. All Rights Reserved. 01/12 SS2561G