WASHDOWN & PRESSURE WASH

WASHDOWN & PRESSURE WASH SEWER CLEANER & JETTING HOSE FITTINGS Part No. Thread Size Hose Size Weight Ea. PRICE EACH 9800SC HOSE MENDERS 9800SC-12-12 3 4" 0.50 $ 101.10 9800SC-1-1 1" 0.80 38.20 980SC FEMALE NPSM FITTINGS PW-L24 24" insulated, plated steel tip lance with 1/4" PW-L3 3" insulated, plated steel tip lance with 1/4" PW-L48 48" insulated, plated steel tip lance with 1/4" PW-LB-3 3" insulated, bent tip lance with 1/4" $ 11.90 14.50 20.50 19.10 PW-GC Gutter cleaner 13.50 980SC-12-12 3 4" 3 4" 0.52 52.80 980SC-1-1 1" 1" 0.90 85.40 981SC MALE FITTINGS 981SC-02-02 1 8" 1 8" 0.04 lb $ 7.50 981SC-02-03 1 8" 3 1" 0.08 10.90 981SC-04-04 1 4" 1 4" 0.10 11.10 981SC-0-0 3 8" 3 8" 0.17 10.0 981SC-08-08 1 2" 1 2" 0.35 17.00 981SC-08-10 1 2" 5 8" 0.3 33.50 981SC-12-12 3 4" 3 4" 0.43 2.90 981SC-1-1 1" 1" 0.71 28.10 METRIC PRESSURE WASHER ADAPTERS These adapters fit 22 millimetre metric pressure wash connections 4008 74008 7401 4008-22-04 Female metric to 1/4" female 8.50 4008-22-0 Female metric to 3/8" female 8.70 74008-22-0 Male metric to 3/8" female 5.10 7401-22-0 Male metric to 3/8" male 5.0 PRESSURE WASHER ACCESSORIES MOLE NOZZLES WITH 1 FORWARD & 3 BACK JETS FOR SEWER CLEANING PW-SC-02 1 8" female 12.10 PW-SC-04 1 4" female 12.50 PW-SC-0 3 8" female 12.80 PW-GA-3 4000 psi 10 GPM gun and wand assembly with 3" insulated, plated steel lance with 3/8" quick coupling inlet and 1/4" female quick coupling tip 8.20 Note: For Pressure Washer Swivel Joints, see the Accessories section in this catalog - Section 1 THESE GUN AND GUN/ WAND ASSEMBLIES ARE RATED TO 99 C (210 F) PW-G PW-G-W 5000 psi, 10 GPM gun with 3/8" female inlet and 1/4" female outlet Weeping version to prevent freezing Note: Weeps at valve in handle assembly, not at outlet 45.90 45.90 5

WASHDOWN & PRESSURE WASH Spray tips are designated by the spray angle (a narrower angle produces more force over a small area, which is great for tough jobs but may gouge or strip softer surfaces), and by orifice size. The orifice size designates the gallons per minute flow at 4000 psi. For pumps operating at other pressures, the correct orifice can be chosen from the chart. Using a larger orifice than recommended will cause loss of cleaning pressure. Using a smaller orifice will mean less flow of water at the maximum pump pressure. Spray tips are available color coded by spray angle with quick disconnect ends, or with 1 4" male ends. Common nozzles are shown below. Other sizes are available on request. PRESSURE WASH SPRAY TIPS Part No. Color Angle Orifice PRICE EACH RED 0 ANGLE NOZZLES FOR BLASTING PW-S00-4 Red 0 o 4.0 $ 8.30 PW-S00-5 Red 0 o 5.0 8.30 YELLOW 15 ANGLE NOZZLES FOR CLEANING HARD SURFACES PW-S15-4 Yellow 15 o 4.0 8.30 PW-S15-5 Yellow 15 o 5.0 8.30 GREEN 25 ANGLE NOZZLES FOR FLUSHING AND WET SWEEPING PW-S25-4 Green 25 o 4.0 8.30 PW-S25-5 Green 25 o 5.0 8.30 WHITE 40 ANGLE NOZZLES FOR WASHING SOFT SURFACES PW-S40-4 White 40 o 4.0 8.30 PW-S40-5 White 40 o 5.0 8.30 NOZZLE KITS - SET OF FOUR NOZZLES PW-S-KIT-4 Four colors 0,15,40,soap 4.0 31.70 PW-S-KIT-5 Four colors 0,15,40,soap 5.0 31.70 BLACK UNIVERSAL SOAP TIP PW-SOAP Black 8.30 To choose the correct nozzle, find the pump pressure of your machine in the top row of the chart below. In that column, choose the row that shows the flow of your pressure washer. In the left column you will find the appropriate nozzle orifice size. Flow in gallons per minute (GPM) at various pump pressures Orifice Pump Pressure 500 1000 1500 2000 2500 3000 4000 5000 3.0 1.0 1.5 1.8 2.1 2.3 2.5 3.0 3.3 3.5 1.2 1.8 2.1 2.5 2.8 3.0 3.5 3.9 4.0 1.4 2.0 2.4 2.8 3.1 3.5 4.0 4.5 4.5 1.5 2.2 2.7 3.1 3.5 3.8 4.5 5.0 5.0 1.8 2.5 3.1 3.5 3.9 4.3 5.0 5. 5.5 1.9 2.8 3.4 3.9 4.3 4.8 5.5.2.0 2.1 3.0 3.7 4.2 4.7 5.2.0.7.5 2.3 3.3 4.0 4. 5.1 5..5 7.3 7.0 2.5 3.5 4.3 4.9 5.5.1 7.0 7.8 7.5 2.7 3.8 4. 5.3 5.9.5 7.5 8.4 8.0 2.8 4.0 4.9 5.7.3.9 8.0 8.9 8.5 3.0 4.3 5.2.0.7 7.4 8.5 9.5 9.0 3.2 4.5 5.5.4 7.1 7.8 9.0 10.1 10.0 3.5 5.0.1 7.1 7.9 8.7 10.0 11.2 12.5 4.4.3 7.7 8.8 9.8 10.8 12.5 14.0 15.0 5.3 7.5 9.2 10. 11.8 12.9 15.0 1.8 ROTARY NOZZLE PW-RN-04 Rotary Nozzle with 1 4" quick $ 11.90 disconnect and in-line filter 1 4 MALE NOZZLES PW-T00-4 0 o 4.0 8.30 PW-T00-5 0 o 5.0 8.30 PW-T15-4 15 o 4.0 8.30 PW-T15-5 15 o 5.0 8.30 PW-T15-8 15 o 8.0 8.30 PW-T25-4 25 o 4.0 8.30 PW-T25-5 25 o 5.0 8.30 PW-T25-8 25 o 8.0 8.30 PW-T40-4 40 o 4.0 8.30 PW-T40-5 40 o 5.0 8.30

GARDEN HOSE NOZZLES & CONNECTORS All of our pistol grip nozzles have full size bodies with insulated grips. Additional features are listed below: PISTOL GRIP NOZZLES These plant washdown nozzles come in two sizes. The standard nozzles weigh just under 3 lb and measure about 1 2" long and high. The aluminum nozzle is full size but lighter in weight. Some users prefer the new Junior model, which weighs just 2 lb and measures in at 5 1 4". All nozzles are rated for a maximum of 150 psi water up to 93 C and are NOT for use with steam. HOT WATER WASHDOWN NOZZLES & SWIVEL HOSE BARBS S-150-W S-150-BL 571TFRL 572TFRL 571TFRL Heavy duty nozzle rated to 38 C (100 F) $ 13.70 Includes threaded front and rubber cap 572TFRL As above but with brass nozzle insert 1.30 For temperatures to 38 C (100 F) S-150-A S-150-JR-B TRIGGER GUARD NOZZLE 50502 Insulated nozzle 2.50 GREEN PLASTIC FOG NOZZLE G97-GHT Garden hose thread 18.40 BRASS NOZZLES Hose Part No. Size Size Description PRICE EACH S-150-W 1 2" White standard spray nozzle $ 252.30 S-150-BL 1 2" Blue standard spray nozzle 242.90 S-150-A 1 2" Aluminum spray nozzle 207.30 S-150-JR-B 3 8" Black junior spray nozzle 13.30 The brass and stainless steel swivel hose barbs listed here are generally used with these nozzles to reduce wrist fatigue but are ordered separately, depending on size required. They are supplied with hanger rings. Hose Part No. Size Size Description PRICE EACH SWIVEL HOSE BARBS & ADAPTERS Nozzles without shut-offs G37M-GHT Miniature brass tapered nozzle with 1 8" orifice 4.50 G37-GHT Long brass tapered nozzle with 1 4" orifice 12.10 G071SX G23SSX Twist shut-off nozzles G97B-GHT Miniature brass twist nozzle 7.25 G37AB-GHT 4" long twist nozzle.50 528 Gilmour heavy-duty twist nozzle with rubber grip 17.50 G071SX-08 1 2" GHT Fits standard nozzle $ 5.00 G23SSX-050-050 2" 1 2" Fits standard nozzle 5.0 G23SSX-050-075 1 2" 3 4" Fits standard nozzle 5.80 G23SSX-038-075 3 8" 3 4" Fits junior nozzle 59.50 G37-GHT G37AB-GHT G97B-GHT 528 See our stainless steel hose hangers in Section 1 of this catalog G37M-GHT 7

GARDEN HOSE COUPLINGS & ADAPTERS G07Y77 Y COUPLINGS Part Hose PRICE EACH Pkg Number I.D. Loose Std Pkg Qty G3 GARDEN HOSE WASHERS G07Y77B G07Y77Z G07Y77BV G3RG G3SG G3VG Material G3RG Rubber $ 0.21 $ 0.18 10 G3SG Stainless Screen 0.85 0.78 10 G3VG Vinyl 0.21 0.18 10 G07Y77PV G07Y77PVG G07Y77B Forged brass $ 12.30 G07Y77Z Cast zinc 7.20 G07Y77BV Forged brass with valves 19.70 G07Y77PV Plastic with valves 4.50 G07Y77PVG Grey plastic with valves, heavier pattern 5.80 G07Y77ZV Cast zinc with valves 12.20 Part Hose PRICE EACH Pkg Number I.D. Loose Std Pkg Qty G3BM MALE GARDEN HOSE INSERT G3BM-038 3 8" $ 4.20 $ 3.90 5 G3BM-050 1 2" 4.10 3.80 5 G3BM-03 5 8" 4.30 4.00 5 G3BM-075 3 4" 4.40 4.10 5 G3BFH FEMALE GARDEN HOSE INSERT G3BFH-038 3 8" 4.90 4.30 5 G3BFH-050 1 2" 4.20 3.90 5 G3BFH-03 5 8" 4.20 3.90 5 G3BFH-075 3 4" 4.90 4.30 5 G3BLF LONG SHANK FEMALE GARDEN HOSE INSERT G3BLF-050 1 2" 9.90 1 G3BLF-03 5 8" 9.90 1 G3BLF-075 3 4" 9.90 1 G3BLM LONG SHANK MALE GARDEN HOSE INSERT G07Y77ZV G3BLM-050 1 2" 9.10 1 G3BLM-03 5 8" 9.10 1 G3BLM-075 3 4" 9.10 1 For nylon garden hose couplings, see the NYLON & POLYPROPYLENE section of this catalog. V10-1707P PLASTIC GARDEN HOSE VALVE V10-1707P Lightweight 3.50 V10-1707PG Premium with swivel nut 3.90 V10-1707 brass garden hose shut off valves feature large 9 1" ports for better flow and are much more robust than typical home garden valves. Part No. Pipe Size IMPA Code PRICE EACH V10-1707 FEMALE GARDEN HOSE INLET/MALE GHT OUTLET V10-1707 GHT $ 30.0 V10-1707CV CHECK VALVE V10-1707CV GHT 7.50 Vacuum breaker fittings are designed to prevent cross connection in a potable water supply. If the pressure suddenly drops in a water system, backflow can sometimes occur from a garden hose connected to an outside faucet. These backflow preventers meet CSA B4.2 standards and feature a manual drain feature on the stem and a break-away set screw for permanent installation and tamper prevention. 8

GARDEN HOSE ADAPTERS Part Thread PRICE EACH Pkg Number Size Loose Std Pkg Qty G0707BSW SWIVEL FEMALE COUPLING Part Pipe PRICE EACH Pkg Number Size Loose Std Pkg Qty G0708B FEMALE GHT TO FEMALE PIPE G0707BSW GHT $ 7.80 $ 7.20 5 G0700B MACHINED BRASS CAP G0708B-08 1 2" $ 3.70 1 G0708B-12 3 4" 5.10 1 G071B FEMALE GHT TO MALE PIPE G0700B GHT 2.30 2.10 5 G0700B-WC GHT with chain 10.50 1 G071B-08 1 2" 4.70 1 G071B-12 3 4" $.30 5.0 5 G1708B MALE GHT TO FEMALE PIPE G1717B MALE COUPLING G1717B GHT 5.00 1 All of our garden hose brass fittings are are now leadfree. G1708B-04 1 4" 5.70 1 G1708B-0 3 8".70 1 G1708B-08 1 2" 4.10 3.70 5 G1708B-12 3 4" 5.0 1 G0708BSW FEMALE GHT SWIVEL TO FEMALE PIPE G0708BSW-08 1 2" 7.10.40 5 G0708BSW-12 3 4" 8.00 7.40 5 G071BS FEMALE GHT SWIVEL TO MALE PIPE G071BS-04 1 4" 8.00 1 G071BS-0 3 8" 8.20 1 G071BS-08 1 2" 7.50.80 5 G071BS-12 3 4" 9.00 1 G171B MALE GHT TO MALE PIPE G171B-0 3 8" 5.00 1 G171B-08 1 2" 5.00 4.50 5 G171B-12 3 4" 5.10 4.50 5 9