SECTION B PAGE 0 ISSUED /0 REPLACES /0 www.pumpagents.com PumpAgents.com - Click here for Pricing/Ordering SERIES: G6--/ thru G9-F 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS 00RPM - 60Hz. CAPACITIES TO 960GPM (60.6LPS) HEADS TO 0 FEET (6M) 900RPM - 0Hz. CAPACITIES TO 60GPM (9.7LPS) HEADS TO 6 FEET (0.M) Individual performance curves should be checked for final selection.
0 Third Street Piqua, Ohio 6-060 SECTION B PAGE ISSUED /0 REPLACES /0 PRODUCT FEATURES. RADIAL SPLIT CASING DESIGN Casing is close grain iron of 0,000 p.s.i. minimum tensile strength. Back pull-out design eliminates the need to disturb piping should the pump ever require service - the casing stays in the line. Centerline discharge. Stud mounted casing assures positive alignment and allows rotation of discharge to eight different positions. Openings are provided for test gauges, for venting and for draining the pump.. ENCLOSED BRONZE IMPELLER Enclosed bronze impeller is of latest hydraulic design for maximum efficiency. It is balanced for vibration free operation. Precision fit to shaft and double-locked with key and cap screw.. REPLACEABLE CASING WEAR RING Prevents wear on casing and is easy to replace.. MECHANICAL SHAFT SEAL Mechanical Shaft Seal is self-adjusting for temperatures up to F (07 C) and pressures to 0 psi (0kpa). Has ceramic seat and carbon seal faces for long trouble-free service. Special seals are available for higher temperatures and fluids other than water. Tapped opening is provided in the seal chamber for flushing seal faces. MAXIMUM OPERATING CONDITIONS Maximum Pumping Temperature* F (07 C) Maximum Inlet Pressure 00 PSI (690kpa) Maximum Case Working Pressure 00 PSI (79kpa) * FOR STANDARD BUNA-N SEAL SUCTION & DISCHARGE SIZES * SERIES SUCTION DISCHARGE G6--/ " -/" G6- & F -/" " G6--/ & -/F " -/" G7- & F -/" " G7A- & F -/" " G7--/ & -/F " -/" G9--/ " -/" G9- & F -/" " G9--/ & -/F " -/" G9-F & G9A-F " " G9-F " " *F Suffix Denotes ANSI # Flat Face Flanges. BRONZE SHAFT SLEEVE Gasketed and keyed hook-type sleeve protects shaft wear and corrosion in seal area. 6. MOTORS The standard Type JM motors supplied with these pumps offer the advantages of quiet operation, controlled shaft deflection for longer mechanical seal life and bearings sized to provide good service life. All motors are supplied by manufacturers providing field service facilities. 7. INTERCHANGEABILITY The complete liquid end of any size pump is interchangeable between motors on close-coupled pumps and the BURKS power frames of comparable size providing inventory flexibility, plus an option for handling emergency service.. FACTORY TESTED After careful assembly and inspection, EVERY pump is factory tested and will meet Hydraulic Institute standards. FOR TEMPERATURES TO 00 F (60 C). All models, with the exception of the G7--/ and all G9 series pumps are available in a Jacketed Seal Cavity design for pumping hot oil, hot water and heat transfer fluids in common use in high temperature heating or cooling applications. This feature greatly extends seal life in high temperature applications. To order, add suffix "MJ" to pump catalog number for temperatures below 00 F (0 C) and add suffix "MJK" to pump catalog number for temperatures over 00 F (0 C). Example: G6--/MJ. See Section on High Temperature Pumps for more information. MATERIALS OF CONSTRUCTION Part Bronze Fitted All Bronze All Iron Adapter Cast Iron Bronze Cast Iron Casing Cast Iron Bronze Cast Iron Casing wear ring Bronze Bronze Steel Shaft Steel Steel Steel Shaft sleeve Bronze Bronze #6 S. Steel Impeller Bronze Bronze Cast Iron Shaft seal Carbon-Ceramic S. Steel-Buna-N Carbon-Ceramic S. Steel-Buna-N Carbon-Ceramic S. Steel-Buna-N
SECTION B PAGE ISSUED /0 REPLACES /0 DIMENSIONS 0 Third Street Piqua, Ohio 6-060 CLOSED COUPLED CENTRIFUGAL PUMPS WITH SCREWED CASING SERIES G6- /, G6-, G6- /, G6- /, G6- & G6- / Catalog Number HP Motor Disc. Suct. DIMENSIONS IN INCHES Phase Phase Frame Size NPT NPT A AB B CP D DD E F G H L X Y 70 & 0 RPM 0G6- / 0G6- / JM / 7 /6 7 / / / / / / 9 7 /6 7 / / 0G6-0G6- JM / 7 / 6 6 / / / / / 9 9 / 6 7 / / 6 G6- G6- / JM 7 /6 6 7 / / / / / 9 9 /6 7 / /6 0G6- / 0G6- / JM 7 /6 6 /6 / / / / 0 / / /6 G6- / G6- / / JM 7 / 6 6 7 / 6 / / / / 0 / / / 6 / 0G6- / ------- JM / 9 7 / / / / / / / / / /6 ------ 0G6- / JM 7 /6 6 7 /6 / / / / 0 / / /6 00 & 900 RPM G6- / ------ / JM 7 /6 7 / / / / / / 9 7 /6 7 / / ------ G6- / / JM 7 /6 7 / / / / / / 9 7 /6 7 / / 0G6- / ------ JM 7 / 6 6 6 7 / / / / / / 9 7 / 6 7 / / ------ 0G6- / JM 7 /6 6 6 7 / / / / / / 9 7 /6 7 / / 0G6 / ------ JM / 9 7 / / 7 /6 / / / / / / 0 /6 7 / / / ------ 0G6- / JM 7 / 6 6 6 7 / / / / / / 9 7 / 6 7 / / 0G6- / ------ JM / 9 7 / 6 / / 6 / / / / / / 0 / 6 7 / / ------ 0G6- / JM / 9 7 / / 7 /6 / / / / / / 0 /6 7 / / ------ 7G6- / 7 / JM / 9 7 / 6 / / 6 / / / / / / 0 / 6 7 / / 0G6- ------ JM 7 / 6 6 7 / / / / / 9 9 / 6 7 / / 6 ------ 0G6- JM 7 /6 6 7 / / / / / 9 9 /6 7 / /6 0G6- ------ JM / 9 7 / / 7 / 6 / / / / / / 0 / 6 7 / / 6 ------ 0G6- JM 7 / 6 6 7 / / / / / 9 9 / 6 7 / / 6 0G6- ------ JM / / 9 7 / 6 / /6 / / / / / / 0 /6 7 / /6 ------ 0G6- JM / 9 7 / / 7 /6 / / / / / / 0 /6 7 / /6 ------ 7G6-7 / JM / 9 7 / 6 / / 6 / / / / / / 0 / 6 7 / / 6 ------ 00G6-0 JM 0 / /6 7 / 0 / / / / / / / 7 /6 7 / /6 ------ 7G6- / 7 / JM / 9 7 / 6 / 9 / / / / / / / /6 ------ 00G6- / 0 JM 0 / / 6 7 / / 6 / / / / / / / / 6 / ------ 0G6- / JM 0 / /6 / 7 /6 / / 7 / / / / /6 ------ 00G6- / 0 JM 9 /6 0 / /6 6 / / 7 / 7 / / / /6 DIMENSIONS SHOWN ABOVE ARE APPROXIMATE MAXIMUM DIMENSIONS FOR STANDARD PUMPS EQUIPPED WITH ODP MOTORS.
SECTION B PAGE ISSUED /0 REPLACES /0 60Hz PERFORMANCE CURVE END SUCTION CENTRIFUGAL PUMPS 0 Third Street Piqua, Ohio 6-060
0 Third Street Piqua, Ohio 6-060 60HZ PERFORMANCE CURVE END SUCTION CENTRIFUGAL PUMPS SECTION B PAGE ISSUED /0 REPLACES /0
CCCP- RPM & PHASE 70 RPM Single Phase (ODP) 70 RPM (ODP) 00 RPM Single Phase (ODP) 00 RPM (ODP) 70 RPM Single Phase (TEFC) 70 RPM (TEFC) 00 RPM Single Phase (TEFC) 00 RPM (TEFC) 70 RPM (XP) 00 RPM (XP) - MOTORS PART OPEN DRIP PROOF 9 9 9 0 0999 09900 0990 0990 0990 0990 0990 09906 09907 09999 TOTALLY ENCLOSED 99 00 0 6 7 0 099 0997 0990 099 0000 EXPLOSION PROOF 6 7 099 099 099 099 000 HP -/ -/ -/ -/ 7-/ 0 -/ -/ 7-/ 0 -/ 7-/ 7-/ 0 FRAME SIZE JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM JM SERIES: G6--/ & G6- CENTRIFUGAL PUMPS File: G6-0.dwg
PumpAgents.com - Click here for Pricing/Ordering CCCP- SYMBOL * 6 7 9 0 A PART 099 0990 09-6-6 007 --6 0609-A 0 0 69 069-A -9-0-C 099 0 0 09 0 QUANTITY 6 099 Flat Gasket + For O-Ring Gasket, See Symbol 099 099-E 099-6. 0999-6.9 0999-6. 099-. 099-.6 099-.06 099-. 099-6. 0999-. 0999-.7 0999-. 0999-6.06 0999-6. DESCRIPTION Adapter - -JM Motors Adapter - -JM Motors Cap Screw - for 99 Adapter Cap Screw - for 990 Adapter Stud Nut Washer Key Casing Assy - G6--/ Casing Assy - G6- Casing Assy - G6-F (Flanged) Pipe Plug, /" - Bronze Screw, Impeller Lock - S.S. Washer - Bronze Flat Gasket + O-Ring Gasket - Buna N (Std) O-Ring Gasket - Viton O-Ring Gasket - EPT* O-Ring Gasket - Teflon Wear Ring, Bronze - G6--/ Wear Ring, Bronze - G6-70 RPM Impeller - 0G6--/ & 0G6--/ Impeller - 0G6- & 0G6- Impeller - G6- & G6-00 RPM Impeller - G6--/ & G6--/ Impeller - 0G6--/ & 0G6--/ Impeller - 0G6--/ & 0G6--/ Impeller - 0G6--/ & 0G6--/ Impeller - 7G6--/ Impeller - 0G6- & 0G6- Impeller - 0G6- & 0G6- Impeller - 0G6- & 0G6- Impeller - 7G6- Impeller - 00G6- SYMBOL * 6 7 9 PART 0996 099 000 00 00 0997 0996 7 06-C 099 00-00-0 09 0 QUANTITY DESCRIPTION Flat Gasket + O-Ring Gasket - Buna N (Std) O-Ring Gasket - Viton O-Ring Gasket - EPT* O-Ring Gasket - Teflon Mechanical Seal - Buna N (Std) Mechanical Seal - Viton Mechanical Seal - EPT ** Shaft Sleeve - Bronze Slinger Washer O-Ring Gasket - Buna N (Std) O-Ring Gasket - Viton O-Ring Gasket - EPT* O-Ring Gasket - Teflon 0 06 Pipe Plug, /" - Bronze DIFFERING PARTS FOR ALL BRONZE CONSTRUCTION 6 0 099-B 0990-B 09 06-B 06 609-B 0-A -A 69-A 09 Adapter--JM Motors Adapter--JM Motors Cap Screw - for 99-B Adapter Cap Screw - for 990-B Adapter Nut Washer Casing Assy - G6--/ Casing Assy - G6- Casing Assy - G6-F (Flanged) Screw, Impeller Lock - Bronze DIFFERING PARTS FOR ALL IRON CONSTRUCTION 9 7 0 0-B -B 69-B 00 0-A 099-A 099-A 099-A 0999-A 6 Use same size suffixes as bronze. 06-A 06-A Casing Assy. - G6--/ Casing Assy. - G6- Casing Assy. - G6-F (Flanged) Pipe Plug Washer - Steel Wear Ring, G6--/ Wear Ring, G6- Impeller - G6--/ Impeller - G6- Shaft Sleeve - S.S. Pipe Plug, /" - S.S. SERIES: G6--/ & G6- *Casing Assy. includes Symbols, 9 &. ** For hot water or caustic service + Series G6--/ and G6- pumps have been manufactured with either flat or O ring type gaskets. Determine which type is required before ording. When in doubt, order flat gaskets.
For technical advice or service please take your pump into your local pump service center. To order pump or parts or for pricing please go to the following links : Burks Pumps Home >> Burks Pumps stock list >>