NT-1300RR-LTD 2 Head Wide Belt Sander Series * Shown NT 1300RRC-LTD Northtech Industrial Machinery 819 East Liberty Street Louisville, KY 40204 Phone: (502) 719-0015 Fax: (502) 719-0014
NT-1300RR-LTD Production Series Wide Belt Sander STANDARD EQUIPMENT Inclusive Features to Northtech Industrial LTD Series Wide Belt Sander: Belt length is 86, width is 52 1 st Contact drum diameter 240mm / 9 ¾ (steel) Motor: 40HP (1720 RPM) 2 nd Contact drum diameter 240mm / 9 ¾ (steel) Motor: 30HP (1720 RPM) Variable speed 4HP V/S drive with heavy duty gear reduction motor system Lifting & Lowering Motor: ¾ HP (Includes auto thickness set-up device) Variable speed 4HP V/S drive with heavy duty gear reduction motor system PC digital table positioning to 0.002 accuracy. Model DP-525 (Mfg. Taiwan) Automatic air jet cleaning system on sanding all heads (Included) A silicone carbide polishing / denibbing brush is included (180 grit) for fine finishing of lumber and solid wood panels. Powered by an independent ¾ HP motor Massive mono block base consisting of 1 / 5/8 plate steel weldment Automatic soft start of main motors (Y Delta) *Telemecanique & Schneider elect components Pneumatic Disc braking / emergency shut down protection for: sanding belt breaking, non-tensioned sanding belt, mistracking of sand belt, overload on main motors (PLC Controlled Actuation) All motors and electricals are CE approved high efficiency and continuous duty rated Efficient and heavy gauge dust collection shrouds are standard Industrial Series Waffle style feeding mat provides long life and positive feeding of panels Easy access panels allow convenient maintenance procedures for electricals, pneumatics, drive belt access as well as abrasive exchange. (Belt change is from right side of machine) Electronic oscillating belt tracking system for sanding belts is standard and PLC based Automatic feed mat tracking system for optimum feed mat life (Mfg. Fiji Electrical) Flow control valves are standard to LTD series facilitating fast oscillation (coarse) abrasives and slower oscillation with fine grits Amperage meters are standard with all main motors as well as inclusive with total overload protection controls (3) emergency shut off buttons to readily access *PLC Controlled Disc Brakes* An electronic measuring device/ auto pre-set is standard to LTD Series ensuring accurate and repetitive setups to each particular part and abrasive grit. Machine weight: 8,900lbs (net) Machine dimensions: 7 ½ x 9 x 7 (net)
TECHNICAL SPECIFICATIONS Working Width: 51 Working Thickness Max: 4.9 (125mm) Belt Motor: 40HP + 30HP + 4HP (230/460V) 3PH Feed Motor: 4HP mechanical variable speed Feed Speed: 15 65 min (variable) Lifting Motor: ¾ HP Belt Size: 52 x 86 Drum Speed: Roller: 1752 RPM Belt Speed: Roller: 4620 ft/min 240mm Drum 240mm Drum
PRICING NORTHTECH 1300RR-LTD 2 Head Calibrating / Finishing Sander 40HP + 30HP + 4HP (feed motor) Includes Silicone Nylon Brush & (3) Belt Cleaning Air Jets with auto timer through the PLC controls Price F.O.B. Louisville, KY Current delivery is approximately 60-70 Days
NORTHTECH INDUSTRIAL LTD SERIES FEATURES & BENEFITS: Large diameter calibrating drums combined with high horsepower provide the capability to remove heavy amounts of stock on wide panels. Heavy plate steel construction ensures vibration free sanding with heavier abrasive selection. *Machine weight is nearly 8,900lbs (net). PLC Controls to abrasive tracking, air jets cleaning, braking system, and safety stops provide a maintenance free and long term state-of-the-art logic system. Digital thickness controls provide an exact and repetitive means of stock removal and optimum finish. Variable speed feeding with large gear reduction system ensures a powerful feeding effect with wide hardwood panels under heavy grits stock removal. Electricals and motors are provided with CE approval and carry a (2) year warranty through Northtech Industrial Machinery. Air jets cleaning system provides up to 30% greater belt life and improved cooling. Silicone carbide brush (#180) provides a denibbing effect as well as final dust removal of ambient dust on large panels. Infeed & outfeed tables are 500mm / 20 long offering full support of large hardwood panels. CE type safeties are installed on all access doors for optimum operator safety (interlock type).