slewing rings production program 23/2-OTO-A
Page 4 Page 5 BASIC INFORMATION SLEWING RINGS CHARACTERISTICS, APPLICATIONS PSL SLEWING RINGS DESIGNATION Page 6 Page 7 BASIC DESIGN SERIES QUALITY ASSURANCE SELECTION OF THE SLEWING RING TYPE AND SIZE Algorithm of working procedures Page 8 Page 9 Page Page 2 Data necessary for selection the suitable slewing ring Slewing ring selection with regard to load size Dimensioning of the gears PRESERVATION, PACKAGING, TRANSPORT AND STORAGE MOUNTING OF SLEWING RINGS Requirements on seating surfaces Page 3 Page 4 Page 6 Mounting procedure Preload forces and tightening torques MAINTENANCE OF SLEWING RINGS Relubrication of the raceways and gears Slewing ring inspection in operation Page 7 Page 8 Recommended lubricants SLEWING RING TABLES Explanatory notes for the tables and diagrams Page 9 Page 2 Order of slewing rings in the tables FOUR-POINT CONTACT BALL SLEWING RINGS without gear Page 3 Page 44 Page 52 with external gear with internal gear CROSSED ROLLER SLEWING RINGS without gear Page 58 Page 64 Page 68 with external gear with internal gear SPECIAL AXIAL-RADIAL ROLLER SLEWING RINGS Page 7 STATIC LIMITING LOAD DIAGRAMS Page 4 CUSTOMER REQUIREMENTS ON SLEWING RING FORM Page 42 TYPICAL APPLICATIONS INVOLVING PSL SLEWING RINGS Publication No. 23/2-OTO-A 3
BASIC INFORMATION PSL a. s. is a company that has a longstanding tradition in production of rolling bearings. At the present time the main areas of the production program are represented by the production of normalized and special rolling bearings, slewing rings, worm drives and bearing rollers. PSL a. s. has created, implemented and certified a system of quality assurance according to ISO 9 standard, that spans the entire production process from research and development to servicing and advisory activities. This publication aims to deliver an integrated picture about the current assortment of PSL slewing rings. It contains a table view of both standard and specialised slewing rings, as well as offers basic technical information; and a manual on how to proceed with the installation plan using the right slewing rings; and instructions on the proper procedures installation and servicing of the slewing rings while in operation. In the case where you need technical assistance involving a complex solution incorporating PSL slewing rings, it will be provided by the PSL Department of Technical Advisory. In the case where you need specific business information, they will be provided by the PSL Sales Department. All contact information pertaining to these specific PSL entities is available on the back of the cover of this publication. The contents of this catalog have been carefully evaluated and checked, however due to continued technical developments, PSL reserves the right to make technical changes or amendments without prior notice. 4
SLEWING RINGS CHARACTERISTICS, APPLICATIONS Slewing rings are large-sized bearings which can accommodate a combined load, i.e. axial, radial loads and tilting moment. They are usually provided with holes for fixing bolts; internal, external or no gear; and lubrication holes and seals, which allow a compact and economical arrangement. In addition they often enable the elimination of many components necessary in the classical bearing arrangement. PSL slewing rings have proven effectiveness in the following applications: construction, mobile and tower cranes, shovel, digging-wheel excavators, revolving grabs and winches, graders, logging industry machines including feller bunchers, loaders, vehicles for waste removal, hydraulic grippers, axles and undercarriages, assembly and access platforms, robots, manipulators and positioners, machine tools, special equipment (rescue vehicles, aerials, feller bunchers and tunnel machines, drilling equipment, wind turbines and cleaning and bottle filling machines). Combining compactness, accuracy, smooth operation with relative high rigidity, together with simple mounting and operation reliability are qualities that allow the use of these bearings in all industrial branches. PSL SLEWING RINGS DESIGNATION The sequence and meaning of symbols used in PSL slewing ring designations are as follows: 9 Supplementary Index Type of Gear E External I Internal O without Gear Rolling Element Diameter Rounded to mm Type of Rolling Elements Z Crossed Cylindrical Rollers B Balls R Axial-Radial Cylindrical Rollers T Tapered Rollers Number of Rolling Elements Rows Basic Design Symbol for PSL Slewing Rings Pitch Diameter of Rolling Elements in mm Manufacturer Specific Design Sequence Number Modification The designation is located on a non-functional surface of the slewing ring. It is made either electrochemically, or by stamping, or marked on a label fastened to the slewing ring. 5
BASIC DESIGN SERIES Single-row four-point contact ball slewing rings and crossed roller slewing rings are being produced in PSL, a.s. Design type B Design type Z without gear with external gear with internal gear Besides these two main design types of PSL slewing rings, PSL also produces other various slewing rings such as: double-row four-point contact ball slewing rings design type type 2B (e. g. 9E-2B4-2-97) double-row crossed roller slewing rings design type 2Z (e.g. 9O-2Z25-4-43) special double-row axial-radial roller slewing rings design type 2R (e. g. 9I-2R4-697-99) special triple-row axial-radial roller slewing rings design type 3R (e. g. 9I-3R32-248-54) Design type 2R Design type 3R without gear with external gear with internal gear 6
QUALITY ASSURANCE In a complex manner, production quality is systematically ensured with the goal to always meet the customers needs during all phases of the manufacturing process. Pre-production phase: pre-sales service professional services for customers marketing market research from the technical and commercial point of view, monitoring of development trends. Production phase: modern manufacturing methods, tools and procedures new materials and methods of heat-treatment continuous innovation of the inspection means and methods product testing on specialized test beds continuous improvement through TQM. Post-production phase: testing of bearing quality in operation; gathered experience is utilized for further performance improvement after-sales service help by specifying application of the products. SELECTION OF THE SLEWING RING TYPE AND SIZE Algorithm of working procedures The algorithm of working procedures necessary to follow during the selection of the appropriate application is as follows: Establishing and summarizing of input data: machine characteristics - required life space for assembling size, direction and character of loads characteristics of operating mode characteristics of working environment. Input data analysis listing of individual requirements priorities: priority listing of important criteria by which the arrangement will be evaluated calculation for structure rigidity. Selection of suitable slewing ring type and size according to stated criteria: calculation of raceways, gear and bolts analysis of calculation results influencing decision on recommended type and size of slewing ring according to criterion priorities. Complex arrangement proposal including abutment parts: abutment parts design optimization fixing arrangement instructions for maintenance. The algorithm shown above represents a great volume of technically complex information. We advise our customers to seek the advice of the PSL specialists in the Technical Advisory Department when selecting the most suitable bearing. With many years of experience, together with modern specialized computer software, realistic and effecting solutions can be offered by PSL. A form for assignment data required for slewing ring calculation and selection is in the appendix of this catalog. The calculation enables us to determine the optimum clearance or preload for the given arrangement with regard to static safety (s o ), size of deformation both in radial and axial direction (δ r, δ a ), and life (L h ). 7
Data necessary for selection the suitable slewing ring To recommend a specific size and design of the slewing ring, it is necessary to know the following data: size, direction and time shares at the specific operating loads required life operating rotational speed (number of rotations per time unit) requirements on accuracy (smoothness of operation and arrangement rigidity) requirements on bearing fixing requirements on gear characteristics of working environment requirements on a built-in space, maximum weight, etc. requirements on mounting, dismounting and maintenance of the slewing ring in operation requirements on arrangement economy. This data is at the same time criteria for the evaluation of the slewing ring suitability on any given application. The priority of individual criterion varies and depends on the requirements on the arrangement as a unit. E. g.: excavators the priority criterion is reliable transmission of the load and life turntables of machine tools the priority criterion is accuracy, smoothness of operation and arrangement rigidity. In most cases, the slewing rings are used for equipment with cyclic movement, or at relatively low rotational speed. This shows that the main criterion is a reliable transmission of the load (i. e. sufficient capacity of the raceways, gear and fixing bolts). 8
Slewing ring selection with regard to load size Selection of a suitable slewing ring for common applications can be carried out from the point of view of the static load rating by means of the diagrams (curves) for the limiting static load of the raceways and fixing bolts (pages 7 39 of this publication) based on the calculated equivalent axial and moment static load. Slewing rings allow accomodation of combined loads (i.e. both axial and radial forces and tilting moments due to eccentric acting of loads). Typical examples of loading are shown in the following schemes: Loading Typical Examples: P R Q P Y X P R Q P R Q Y P X F A = Q F A = Q F A = Q F R = P R M = F R = P R M = F R = P R M = P Y X Q Y P X P Y P X X Q Y Q Y P X P R P R F A = Q + P Y F A = Q + P Y F A = Q + P Y F R = P X P R M = x. P Y + y. F R = P X + P R M = x. P Y y. F R = P X M = y. P X P X P X P Y X Q P R P R F A = P Y F R = P R M = x. P Y F A = Q F R = M = F A = F R = P R M = 9
Calculation of Equivalent Axial and Moment Static Load Slewing Rings Formula Conditions of Validity Four - point contact ball slewing rings Crossed roller slewing rings F OA = (F OA +5,5.F OR ).s F O OR, 8 e 2 M OK = M OK.s O F OA = (,23.F OA +2,68.F OR ).s F O OR, 8 e 2 M OK =,23.M OK.s O F OA F OR F OA = (F OA +2,5.F OR ).s F O OR, 8 M OK = M OK.s O F OA kde: F OA of axial static forces for a slewing ring [kn] F OR of radial static forces for a slewing ring [kn] M OK of tilting moments (static) for a slewing ring [knm] s O coefficient of static safety (values see Table ) [ ] 2. M OK e = parameter of load eccentricity [ ] FO A. D S D S slewing ring mean diameter [mm] Note: if F OR F OA <, it is not neccessary to take into account the radial force when calculating the equivalent load. The calculated values of the axial and moment static load define the coordinates of the working point in the diagram for the limiting static load of the slewing ring. The working point must lie under the curve for the bolt static load. Table Values of Static Safety Coefficients for Various Operating Conditions and Applications Slewing Ring Movement Rotary Swinging Occasional turning or slewing Kind of Load Requirements on Movement Uniform load Quiet operation without impacts Normal operating conditions Light impacts Great or considerable impact load Great swing angle with low frequency Uniform load without impacts Medium swing angle Normal load, light impacts Small up to medium swing angle with high frequency Great or considerable impact load Uniform load Normal load Light impacts Great or considerable impact load Example Turntables of the conveyer systems.5. Cleaning and bottle filling machines Barking machines Machine tools Transport means Vibration rollers Radar aerials Positioners Stackers Assembly cranes Service cranes Small and medium excavators Car cranes Building and ship cranes Radar aerials Robots and manipulators Cranes with grab or magnet Transfer cranes Large excavators Connecting joints of undercarriages of building, earth and felling machines Mounting fixtures Positioners Discharging conveyers Aerials Pan slewing rings Wind turbines Concrete pumps Manipulators for nuclear power stations S O..25.25.5.8..25.5.5 2.5.5.8.25.5.5 2.5
Dimensioning of the gears For correct gear dimensioning, it is necessary to know the following data: characteristics of the operating conditions, time share of individual work regimes, method of lubrication, operating temperature, etc. nominal and maximum circumferential forces by individual working regimes, data about pinion (number of teeth, correction, material, heat treatment, etc.). Suitability for a given application from the point of view of gear dimensioning can be evaluated by comparing the real nominal and maximal circumferential forces with allowed circumferential forces for the gear. Allowed nominal and maximal circumferential forces Slewing Ring Tables. Calculation of the nominal and maximum circumferential force: 2. M Tnom 2. M Tmax F Tnom = F Tmax = m. (z + 2x) m. (z + 2x) Where: F Tnom nominal circumferential force [kn] F Tmax maximal circumferential force [kn] M Tnom nominal rotating torque [knm] M Tmax maximal rotating torque [knm] m gear module [mm] z number of teeth [ ] x unit displacement of the basic profile (unit correction) [ ] The main criteria for evaluating gear suitability is the fatigue resistance at bending and max. static load transmission. The following conditions must be fulfilled: F Tnom F TDov for fatigue resistance at bending F Tmax F TmaxDov for max. static load transmission Permitted values of the nominal and maximum circumferential forces for the PSL slewing ring gear are shown in the Slewing Ring Tables. They were calculated for specific materials from which the individual geared rings are produced. If the PSL slewing ring cannot be selected according to the above mentioned criteria, contact the experts of the PSL Department of Technical Advisory.
PRESERVATION, PACKAGING, TRANSPORT AND STORAGE Before packaging the slewing rings, they are preserved with a liquid preservation agent providing protection against corrosion for approximately 2 months in a temperature controlled environment. The store temperature should be 2 ± 5 C with relative humidity max. 6 %. After the preserving agent has been applied the slewing rings are wrapped with PE foil band, then packed on pallets or in boxes. The type of packaging should be discussed in advance with PSL, a. s. Slewing rings should be transported horizontally on a pallet if possible, sufficiently secured to prevent movement. Large sized bearings can be also transported on appropriate A-frames in slope position providing they are strengthened against distortion by appropriate struts. MOUNTING OF SLEWING RINGS Requirements on seating surfaces Seating surfaces of the connecting structure for slewing rings must meet the following conditions: a) Machining roughness max. R a = 2.6 (usually R a = 6.3 or less), b) Acceptable deviation of flatness in both circumferential and radial direction should be equal to a maximum value of: a =.. D s c) Maximum deflection of connecting structure under maximum operating load should not exceed value of: y =.5. D s Where: D s slewing ring mean diameter [mm], [mm], [mm]. The variation of flatness can occur only once within the 8 section. To prevent local bearing overloading due to seating surface out of flatness or deflection of the connecting structure, any possible variation within the section - 9-8 should increase or decrease gradually. Rolled out circumference of the flange seating area Maximum flatness deviation in the radial direction Minimum spacing of the seating area peaks 9 8 27 36 Maximum circumferential flattness deviation 2
Mounting procedure Before assembling, it is necessary to clean all surfaces thoroughly from burrs, paint residues, etc. Seating surfaces should be dry, without lubricant. Furthermore, it is necessary to inspect flatness of the seating surfaces. Feeler gauges are used to check slewing ring adaptation. The unhardened area of the non rotating ring should be mounted so that it is positioned in the least loaded zone i.e. in the plane perpendicular to the main load plane. The unhardened area is marked on the respective ring non-functional surface with a stamped symbol X or with a painted red line. When assembling a geared slewing ring, it is important to adjust the backlash in the gear correctly. It is adjusted with a feeler gauge or with another suitable method in the zone of maximum radial gear runout. The extent of the backlash should be approximately.3 x m, where m means the gear module. The backlash should be inspected again after the slewing ring is finally fixed on the machine. The zone of the maximum radial gear runout is marked with a blue line in the gap between teeth. Slewing rings are fixed to the machine with pre-stressed bolts. Before assembly, the fixing bolts should be coated slightly with oil. The size of preload force or tightening moments has to be determined depending on the friction conditions in the bolt thread and on the seating surfaces of the nut (screws and nuts with treated surfaces have a different friction coefficient than ones without surface treatment). Preload forces and needed tightening torques for the particular material and size of the screws without surface treatment (friction coefficient =,4 ) are listed in the tables that follow. The slewing ring should not be loaded by the tilting moment during the process of bolt tightening. Tightening of each of the bolt connections should be divided into two stages until achieving the working size of the preload force or torque. During the first step it is recommended to tighten the bolts until achieving 6 % of the preload force or torque. During the second stage to tighten all the bolts to reach % of the preload force or torque. In each stage of tightening, a sequence as shown in the diagram should be followed. After finishing the installation of the slewing ring, it is necessary to check the lubrication of all functional parts of the slewing Sequence of bolts tightening ring and measure the initial tilting clearance of the slewing ring. Tilting clearance is defined as the difference of axial shifts of the rotating part of the construction to the base, while loaded the slewing ring with the tilting moment ±M tilting. Measured values should be recorded in the operation log of the mechanism and should serve in order to evaluate the wear of the raceways. 3
Preload forces and tightening torques Table 2 Bolt Size according to DIN 3 Strength Class of the Bolt according to DIN/ISO 898 Yield Strength R p,2 [MPa] Preload Forces and Tightening Torques for Metric Bolts (Friction Coefficient μ =.4) Pre-loaded Thread Cross-Section Cross-Section A S [mm 2 ] Ad 3 [mm 2 ] 8.8.9 2.9 64 for M 6 66 for > M 6 Preload Force F M [N] Tightening Torque M U [Nm] Preload Force F M [N] 94 Tightening Torque M U [Nm] Preload Force F M [N] Tightening Torque M 5 4.2 2.7 6,4 5.5 9,3 8.,9 9.3 M 6 2. 7.9 9, 9.3 3,2 3.9 5,4 6.2 M 8 36.6 32.8 6,5 22.5 24,2 33 28,5 38 M 58 52.3 26, 45 38,5 67 45, 78 M 2 84.3 76.2 38,5 78 56, 7 66, 35 M 4 5 5 53, 26 77, 84 9, 26 M 6 57 44 72, 93 6, 279 24, 333 M 8 93 75 9, 27 29, 387 5, 459 M 2 245 225 7, 387 66, 558 94, 648 M 22 33 282 46, 522 28, 747 243, 873 M 24 353 324 68, 666 239, 954 28,,6 M 27 459 427 22, 99 35,,395 37,,665 M 3 56 59 27,,35 385,,89 45, 2,25 M U [Nm] M 33 694 647 335, 48, 56, M 36 87 759 395, 56, 66, M 39 976 93 475, 67, 79, M 42,2,45 542, 772, 94, M 45,3,224 635, 95,,59, M 48,47,377 74,,8,,9, See note See note See note M 52,76,652 857,,22,,429, M 56 2,3,95 989,,48,,648, M 6 2,36 2,227,56,,647,,927, Note: Tightening torques shown in Tables 2 and 3 are valid for tightening with a torque wrench. The permissible variance is ± % of values shown in the tables.when using bolts with thread greater than M3, the friction size is substantially different. It is not recommended to create the required preload by a torque wrench, but by means of a hydraulic tensioning device. In this case the preload should be adjusted by means of measuring the whole bolt prolongation. The overall bolt prolongation is: Δl = F M.δ s [mm], where: δ s Yielding of bolt and nut. 4
Table 3 Bolt Size according to ANSI B. Preload Forces and Tightening Torques for Bolts with UNC Standard Thread (Friction Coefficient μ =.4) Strength Class of the Bolt according to ASTM Pre-loaded Cross-Section A S [sq.in] Thread Cross-Section Ad 3 [sq.in] Preload Force F M [lbs] A-325 (Grade 5) A-49 (Grade 8) Tightening Torque M U [ft.lbs] Preload Force F M [lbs] Tightening Torque /4 2.38.269,893 7 2,896 5/6 8.524.453 3,2 4 4,77 2 3/8 6.775.678 4,6 25 7,52 38 7/6 4.63.933 6,325 39 9,674 6 /2 3.49.257 8,443 6 2,93 92 9/6 2.89.62,826 87 6,557 33 5/8.226.27 3,447 2 2,566 83 3/4.3345.39 9,9 23 3,436 325 7/8 9.467.492 25,2 34 42,8 524 8.657.559 33,74 47 55,23 786 /8 7.7633.6929 4,675 668 69,458,3 /4 7.969.8896 5,2 894 88,89,57 M U [ft.lbs] 3/8 6.5.52 59,626 4,748 /2 6.453.2935 72,792 27,878 3/4 5.8995.7437 98,392 72,85 2 4 /2 2.4982 2.2996 29,48 227,339 See note See note 2 /4 4 /2 3.2477 3.26 68,23 295,54 2 /2 4 3.9988 3.754 27,39 363,893 sq.in = 645.6 mm 2 mm 2 =.553. -3 sq.in lbs = 4.448222 N N =.2248892 lbs ft.lbs =.35588 Nm Nm =.7375629 ft.lbs It is necessary to use hardened washers for the friction joints according to DIN 696 / EN4399-6 standards with hardness 295 35 HV beneath the bolt heads. The washers are used to distribute the strain onto the largest surface possible so that the value of the specific load of the seating surface under the bolt head and nut doesn t exceed allowed values. The assembly preload force value in the bolts should be high enough to ensure that the bolts don t become loose. We recommend washers of the Nord-Lock type for dynamic cyclic stressed applications of the involved threaded joints. 5
MAINTENANCE OF SLEWING RINGS Maintenance involves a regular relubrication of the raceways and gear, together with the inspection of fastened bolts and the wear of the bearing. Relubrication of the raceways and gears Generally recommended lubricants for the raceways are lithium plastic lubricants with the consistency level of 2 with EP additives. For the gears, plastic lubricants for open gears are recommended. The overview of recommended lubricants is shown in Table 4. Relubrication interval and lubricant quantity primarily depends on operating conditions, i.e. load, rotational speed, operational environment properties, etc. For low-speed applications (mobile cranes, construction cranes, etc.), the relubrication interval is about 2 operating hours. For machines with higher rotational speed; for equipment operating under permanent rotational speed; or for equipment in tropical conditions (excavators, universal finishing machines, magnetic separators, etc.), the relubrication interval is shorter, approximately 7- operating hours. The quantity of necessary grease for each relubrication can be approximately calculated using the following formula: Q m =,3. D s 2 [kg] Where: D s slewing ring mean diameter [m] When relubricating, the lubricant should be uniformly distributed in the inner space of the slewing ring. The most suitable way of achieving this is to apply the lubricant while the bearing rotates or by application from several circumferential positions of the slewing ring. Slewing ring inspection in operation It is possible to evaluate the level of wear of the raceways and rolling elements according to the inspection of the run smoothness of the slewing ring and by measuring and evaluating the size of tilting clearance. Wear of the gear can be measured through regular dimensional inspection of the teeth thickness. The inspection of the bolt joints consists of the examination of the tightening of the bolts (conducted with the torque wrench) and checking the technical condition of the bolts focusing on possible cracks in the bolts as well as on determining the existence of depth corrosion. During each inspection each obviously loosed bolt is being retightened according to the assembly instruction. Bolts with cracks or heavily corroded have to be replaced by new ones. Control of the seals is conducted through determining the functionality and the integrity of the seals. More detailed information about the inspection of slewing rings in operation will be provided upon request by the specialists of the PSL Technical Advisory Department. 6
Recommended lubricants Table 4 Producer Raceway Lubricant type Gear Aralub HLP 2 (-3 C to +2 C) (243 K to 393 K) Aralub MKA - Z (-2 C to +2 C) (253 K to 473 K) Energrease LS - EP 2 (-25 C to +4 C) (248 K to 43 K) Energrease LC 2 (-3 C to +5 C) (243 K to 423 K) Spheerol EPL 2 (-2 C to +4 C) (253 K to 43 K) Castrol LZV - EP (-3 C to 5 C) (243 K to 423 K) Epexa 2 (-2 C to +4 C) (253 K to 43 K) Cardrexa DC (-2 C to +2 C) (253 K to 393 K) Beacon EP 2 (-2 C to + C) (253 K to 383 K) Multi purpose grease (Moly) (-25 C to +5 C) (248 K to 423 K) Ronex MP (-25 C to +3 C) (248 K to 43 K) Dynagear (-2 C to + C) (253 K to 373 K) Lagermeister EP 2 (-2 C to +3 C) (253 K to 43 K) Ceplattyn 3 (-3 C to +25 C) (243 K to 523 K) Klüberlub BE 4-542 (-2 C to +4 C) (253 K to 43 K) Grafloscon C-SG Ultra (-3 C to +2 C) (243 K to 473 K) Mobilux EP 2 (-25 C to +2 C) (248 K to 393 K) Mobilgear OGL 46 (-2 C to +2 C) (253 K to 393 K) Shell Alvania EP 2 (-25 C to +3 C) (248 K to 43 K) Shell Malleus OGH (-2 C to +3 C) (253 K to 43 K) Multifak EP 2 (-3 C to +2 C) (243 K to 393 K) Crater 2x Fluid or 5x Fluid (-2 C to +6 C) (26 K to 389 K) Multis EP 2 (-3 C to +5 C) (243 K to 423 K) Total Cardrexa GR - AL (-3 C to +2 C) (243 K to 393 K) Lubricants Unoba EP 2 (-8 C to +43 C) (255 K to 46 K) Gearite HD CF 48 (2 C to +2 C) (285 K to 393 K) 7
SLEWING RING TABLES Explanatory notes for the tables and diagrams The following tables show the standard PSL slewing rings whose cross-section corresponds to the figure above the Table. The tables contain basic dimensional specifications as well as data for the attachment and other technical specifications. The load curves for individual standard slewing rings have been calculated for the static safety factor of s = and are listed based on the PSL specific design sequence number. Static Moment Load 36 3 24 Limiting Static Curve for Bolts Made of Material.9 Limiting Static Curve for Bolts Made of Material 8.8 8 Limiting Static Curve for s o = 2 Slewing Ring Working Point 6 2 24 36 48 6 Static Axial Equivalent Load Slewing Ring Designation The following conditions apply to the static limiting load curves of bolts: The bolts are uniformly spaced around the circumference of the bolt pitch circles The axial load acts on the slewing ring in a seating way, i.e. the bolts are not sufficiently loaded by the hanging load The size of the radial load is maximum % of the axial bearing load The slewing ring and fitting construction are made of steel The design of the attached parts is rigid enough, the fitting surface are machined The gradient of the bolt head or nut seating surface to the bolt axis is max. The clamping length is minimally l k = 5.d The friction coefficient in the thread is.4 Note: If there is great radial load, the bolt hole diameter should be as large as possible and the slewing ring should be radially supported, i.e. piloted in an adjacent construction. 8
If the corresponding diagram lacks either one or both of the curves for the bolts, then those bolts are overdimensioned with regards to raceways. Special PSL slewing rings i. e. slewing rings that have cross sections which do not correspond with the pictures above the tables or otherwise deviate from the standard production (e. g. have irregular distribution of mounting holes, special gears, higher accuracy, not sealed from one or both sides or have an atypical shape of rings). These slewing rings have listed their boundary dimensions, designation and weight only. Technical help with choosing the right slewing ring and additional information about the particular application will be provided upon request by the personnel of the PSL Technical Advisory Department. If needed, please fill in the data questionnaire that is located at the back of this publication. Order of slewing rings in the tables Slewing ring types located in the tables are are listed in the following order: Four-point contact ball slewing rings: without gear with outer gear with inner gear Crossed roller slewing rings: without gear with outer gear with inner gear Special axial-radial roller slewing rings 9
FOUR-POINT CONTACT BALL SLEWING RINGS without gear n x N G a Single-row n2 x N2 G 2a D J d d S 2 2 T H G b G 2b 2 H G 2c G c J D D Single-row Boundary Dimensions Designation Weight Abutment Dimensions Mounting Holes N Mounting Holes N 2 d D T G J J 2 N N 2 Number n Hole Type Number n 2 Hole Type [mm] [kg] [mm].6 223.7 49 9O-B22-63-38 9.4 23.2 2.65 M M 6 D (2-) D.6 228.6 49 9O-B2-63-65 25.38 2.7 3/8-6 UNC 8 B 8 D 25 234 25 9O-B-79-67 4 24 44.5 9 9 24 B (2-) B 26 259 43.95 9O-B4-93-85-9 232 53 M6 7 2 C 2 A 3 24 3 9O-B7-83-25 9 22 5 M M 8 C 8 C 4 3 36 9O-B3-22-92.5 27 7 M6 8 2 C 2 A 4 3 36 9O-B3-22-38-2 27 7 3 2 3 A 3 C 4 3 36 9O-B3-22-38 27 7 M6 8 2 C 2 A 45 3 5 9O-B2-223-427 6.7 27 75 4.27 4.27 6 A 6 A 45 3 5 9O-B2-223-574 5 27 75 M6 M6 6 C 8 C 45 3 5 9O-B2-223-447 7 27 75 4.3 /2-3 UNC 8 B 8 C 45 3 5 9O-B2-223-574-5 27 75 M6 M6 6 C 8 C 45 3 5 9O-B22-223-397 6.5 27 75 5/8- UNC 7 6 C (6-) A 45 3 5 9O-B2-223-326 5 27 75 7 7 6 A (6-) A 83 375 63 9O-B25-279-428 33.5 338 22 M6 M6 2 E 2 E 9 329 45 9O-B22-26-884 5 35 25 4 4 6 A 6 A 9 326 46 9O-B2-26-85 5 35 25 4 4 2 A 2 A 9 326 46 9O-B2-26-87 5 35 25 3.5 3.5 2 A 2 A 2 3 35 9O-B4-25-479 8 28 22 M M 6 C 6 C 2 365 4 9O-B2-289-295 2 335 24 4 4 6 A (2-) A 2 365 4 9O-B2-289-295-8 335 24 /2-3 UNC /2-3 UNC 6 C (2-) C 2 365 4 9O-B2-289-295-3 2 335 24 4 4 6 A 2 A 2 365 4 9O-B2-289-295-4 8 335 24 2.7 2.7 6 A 2 A 2 365 4 9O-B2-289-295-5 2 335 24 4 4 6 A 2 A 2 365 4 9O-B2-289-295-6 8 335 5/8- UNC 5/8- UNC 6 C 2 C 2 365 4 9O-B2-289-295-7 8 335 24 /2-3 UNC /2-3 UNC 6 C (2-) C 232 4 46 9O-B2-38-945 24.5 375 259 4 4 6 B 6 B 235 43.5 55 9O-B22-3-49 26 358 259 M2 3 24 D (28-) A 265 42 5 9O-B2-342-793 26 39 295 4 4 8 A 24 A 267 48 5 9O-B2-342-789 25 39 295 4.4 4.4 8 A 24 A 27 486 63 9O-B25-378-4 5 442 34 M2 22 6 E 6 A 27 38 35 9O-B4-325-67 2.5 36 29 24 A 24 A 275 485 55 9O-B25-38-852 45 453 37 8 8 6 A 6 A 34 457 48 9O-B2-386-32 27.5 43 34 5 5 8 A 8 A 323.6 52.29 54. 9O-B25-422-485 46.5 479.425 365.25 5/8- UNC 7.5 2 D 2 A 2
Mounting holes types A B C Lubrication spots types a b c d e D E F f g h ch i Other Specifications Lubrication Spots Note No. Notes D d 2 H H 2 Type Size Location Number [mm] 43 43 f /8-27 NPT Gc - Pilot diameter d is on the opposite side of the inner ring 43 43 a /8-27 NPT Gb 2 - Counterbore of the mounting holes on one (upper) side 25 24 24 a AM8x Gb, 2 3 - Lubricant fi lling for the total lifetime 259 26 34 34.95 3 24 3 28 28 a R /8" Gb 2 3 3 e Mx Gb 3 3 f Mx Gb 3 3 f Mx Gb 44 44 f Mx G2b 42 42 f /8-27 NPT Gb 2 3 46 44 44 f /8-27 NPT Gb 2 42 42 f /8-27 NPT G2b 2 299.24 46 44 44 f /8-27 NPT Gb 2 3 45 44 44 f Mx G2b 373 85 54 54 f Mx Gb 3 328 92 44 44 a AMx Gb 4 4 h AM8x Gb 4 4 h AM8x Gb 2 3 3 c CM8x Ga 2 2 365 38 38 f /8-27 NPSF G2b 2 38 38 f /8-27 NPT Gb 2 365 38 38 a AMx G2b 2 38 38 e/a /8-27 NPT Gb/G2b 2/2 38 38 e/a /8-27 NPT Gb/G2b 2/2 38 38 a /8-27 NPT G2b 38 38 h /8-27 NPT Gb 4 232 4 4 a AMx Gb 4 45 45 f /8-27 NPT Gb 4 44 27.8 44 44 a /8-27 NPT Gb 48 267 43.6 43.6 a/e /8-27 NPT Gb/G2a / 456 27 54 54 h AMx Gb 4 378 272 3 3 h AM6 Gb 2 5 5 h AM8x Gb 46 46 h AMx Gb 2 52.3 52.3 a /8-27 NPT Gb 2
FOUR-POINT CONTACT BALL SLEWING RINGS without gear n x N G a Single-row n2 x N2 G 2a D J d d S 2 2 T H G b G 2b 2 H G 2c G c J D D Single-row Boundary Dimensions Designation Weight Abutment Dimensions Mounting Holes N Mounting Holes N 2 d D T G J J 2 N N 2 Number n Hole Type Number n 2 Hole Type [mm] [kg] [mm] 323.6 52.29 54. 9O-B25-422-485-45 479.425 365.25 7.5 7.5 2 A 2 A 323.6 52.2 54. 9O-B25-422-2 47.5 479.425 365.25 7 5/8- UNC 2 A 2 D 323.6 52.29 54. 9O-B25-422-53-46 479.425 365.25 9 3/4- UNC 2 A 6 D 323.6 52.29 54. 9O-B25-422-53-2 46 479.425 365.25 6 3/4- UNC 2 A 6 D 323.8 52.3 53.8 9O-B25-422-564 46 479.425 365.25 4.3 3/4- UNC 2 B 6 D 33 53 85 9O-B35-43-537 67 495 365 M6 7 (36-) E 36 A 333 558 72 9O-B3-446-27 65.5 54 377 22 22 2 A 2 A 336 474 46 9O-B2-45-387 25 45 36 4 4 3 A 3 A 336 474 46 9O-B2-45-387-25 45 36 3 3 24 A 24 A 342 486 56 9O-B2-44-87 3 46 368 /2-3 UNC 4.4 2 F 2 B 384 562 59 9O-B25-475-24 4 53 42 8 8 6 A 6 A 4 58 7 9O-B3-49-377 57 55 43 M6 7 8 E 8 A 435 72.4 87.3 9O-B45-559-35 38 644.5 473. 2 2 (3-) B 3 B 44.5 654 84 9O-B32-548-36 92 69. 476.3 3/4- UNC 3/4- UNC 3 E (3-) E 45 65 75 9O-B32-55-48 69 65 485 22 22 (36-) A 36 A 46 6 45 9O-B22-53-9 37 575 485 4 4 24 A 24 A 46 699 72 9O-B32-58-342 93 655 54 22 22 22 A 22 A 482.6 654. 57.2 9O-B2-56-39 5.5 64.85 55.92 /2-3 UNC 6 2 D 2 A 487 72 72 9O-B3-6-3 9 668 53 22 2 24 A 24 E 57 753 88 9O-B4-635-55 73 557 23.8 23.8 (36-) A 36 A 52.7 779.5 95.3 9O-B45-654-64 52 738.75 572.567 2.6 3/4- UNC (36-) A 36 D 545 73 68 9O-B25-64-355 73 69 58 M2 7.5 24 D 24 A 634 848 56 9O-B2-744-34 75 82 662 M8x.5 M8x.5 24 C 24 C 675 85 7 9O-B25-763-83 83.5 82 75 7 M6 24 A 24 C 726.4 4.4 98.6 9O-B4-883-354 285 99.6 787.4 3/4- UNC 2 2 D 2 B 77.7 33.6 4.3 9O-B5-953-299 352 6.5 844.5 33 33 (4-) A 4 A 772 96 56 9O-B2-844-565-57 89 798 3.5 3.5 4 A 4 A 8 9 4 9O-B3-854-33 27 884 826 9 9 24 A 24 A 745 65 9O-B5-9-579 29 8 3 3 36 A 36 A 753..9 82.6 9O-B35-867-22 88 939.8 78.5 7.5 5/8- UNC 24 B 24 C 83. 6 76.2 9O-B32-9-79 4 98.75 838.2 2 3/4- UNC 36 A 36 D 957.6 2 74 9O-B3-79-898 76.5 54 4 22 22 36 A 36 A 93 26 67 9O-B2-77-655 32 23 23 4 4 24 B 24 B 4 36 2 9O-B5-2-239 43 3 3 3 4 A 4 A 84.6 27.98 65 9O-B4-229-657 62 256 22 M M 36 D 36 D 22
Mounting holes types A B C Lubrication spots types a b c d e D E F f g h ch i Other Specifications Lubrication Spots Note No. Notes D d 2 H H 2 Type Size Location Number [mm] 52.3 52.3 a /8-27 NPT Gb 4 - Pilot diameter d is on the opposite side of the inner ring 52.3 52.3 a /8-27 NPT Gb 4 2 - Counterbore of the mounting holes on one (upper) side 323.6 52.3 52.3 a /8-27 NPT Gb 3 - Lubricant fi lling for the total lifetime 323.6 52.3 52.3 a/f /8-27 NPT Gb/G2b / 52.3 52.3 a /8-27 NPT Gb 53 33 76 76 h AM8x Gb 8 558 333 63 63 h AMx Gb 4 4 4 g M8x Gb 3 4 4 g M8x Gb 3 44.5 44.5 h AM6 Gb 2 56 384 52 52 g Mx Gb 4 58 4 6 6 g Mx Gb 3 8 8 a /8-27 NPT G2b 6 74.7 74.7 a /8-27 NPT Gb 2 65 65 h AMx Gb 4 6 46 45 45 f/f Mx Gb/G2b 2/2 63 63 g M8x Gb 8 45.7 45.7 a /8-27 NPT G2b 4 63 63 h AMx Gb 3 753 77 79 79 g Mx Gb 3 85.9 85.9 a /8-27 NPT Gb 2 59 53 f Mx Gb 3 45.5 45.5 g Mx Gb 8 85 55 6 g Mx Gb 2 88.9 88.9 f /8-27 NPT Gb 3.6.6 a /8-27 NPT Gb 4 44.5 44.5 a AM8x Gb 4 9 8 33 33 f M8x Ga 3 f Mx G2b 4 73.2 73.2 h /8-27 NPT Gb 4 2.95 86.45 66.5 66.5 c /8-27 NPT Gb 2 99 959 63.5 63.5 f Mx Gb 4 26 93 58 58 a AMx G2b 6 355 45 a AMx Gb 4 5 5 f G /8" (/8 BSP) Gb 4 23
FOUR-POINT CONTACT BALL SLEWING RINGS without gear n x N G a Single-row n2 x N2 G 2a D J d d S 2 2 n x N G a Double-row n2 x N2 G 2a D J d d S 2 2 T H G b G 2b 2 H T G b G 2b H H2 G b * G 2b * G 2c G c J D D G c G 2c J D D Single-row Boundary Dimensions Designation Weight Abutment Dimensions Mounting Holes N Mounting Holes N 2 d D T G J J 2 N N 2 Number n Hole Type Number n 2 Hole Type [mm] [kg] [mm] 3 64 9O-B45-455-857 43 56 345 22 22 48 A 48 A 355 555 63 9O-B25-455-334 63 55 395 22 22 48 A 48 A 884 26 9O-B4-2-98 4.5 276 924 22 22 92 A (92-) A 22 24 73 9O-B25-23-7 3 236 224 22 22 6 A 6 A Double-row 75 95 7 9O-2B6-34-65 9.5 7 96 3 5 6 B A 6 346 88 9O-2B2-268-72 35 32 25 7.5 9 24 A (6-2) B 22 396 95 9O-2B25-38-73 49 365 247 7.5 9 3 B (24-2) B 3 5 5 9O-2B25-4-974 74 472 348 22 22 24 A 24 A 24
Mounting holes types A B C Lubrication spots types a b c d e D E F f g h ch i Other Specifications Lubrication Spots Note No. Notes D d 2 H H 2 Type Size Location Number [mm] 9 9 h AMx Gb 6 - Pilot diameter d is on the opposite side of the inner ring 54 54 h AMx Gb 6 2 - Counterbore of the mounting holes on one (upper) side 86 86 f Mx Gb 8 3 - Lubricant fi lling for the total lifetime 24 22 63 63 f Mx Gb 4 63 63 h AMx Ga 2 346 6 78 83 h AMx Ga 2 396 22 85 85 h R /8" Ga 2 5 4 9 96 h AMx Gb/Gb* 2/2 25
FOUR-POINT CONTACT BALL SLEWING RINGS without gear special Single-row d T D Single-row Single-row Boundary Dimensions Designation Weight Boundary Dimensions Designation Weight d D T G d D T G [mm] [kg] [mm] [kg] 7 85 42 9O-B6-28-369 6 234.2 389 6 9O-B25-39-96 26.5 28 29 9O-B-52-6- 6.5 235 43.5 55 9O-B22-3-49-26 24 34.5 9O-B-54-94 5 235 43.5 55 9O-B22-3-338 26 2 25 44 9O-B4-85-366 235 464 56 9O-B2-3-269 44 25 245 25 9O-B3-79-68 5.5 235 464 56 9O-B2-3-269 HL 44 26 259 44 9O-B4-93-85 8.5 24 33 6 9O-B6-29- 4.5 38 8 5 9O-B5-5-566. 245. 46 92 9O-B25-353-75 6 4 34 22 9O-B7-83-32-4 25 43 45 9O-B6-35-84 27.5 4 266 22 9O-B7-83-332 4.5 25 43 45 9O-B6-35-669 27 4 266 22 9O-B7-83-322 4.5 25 43 45 9O-B6-35-669-27 4 24 22 9O-B7-83-32 4 265 455 75 9O-B3-36-34 44 4 24 22 9O-B7-83-245 4. 27 439 45 9O-B6-34-6 26.5 4 266 22 9O-B7-83-244 5 27 439 45 9O-B6-34-6-26.5 4 3 36 9O-B3-222-649 3.5 27 486 63 9O-B25-378-4-5 45 3 45 9O-B8-24-364 5 276 54 67 9O-B25-48-292 5 45 32. 5 9O-B22-223-37 9 276 54 67 9O-B3-48-866 54.5 89 332 45 9O-B2-26-94 7 276 54 67.8 9O-B3-48-64 6 9 36 55 9O-B2-275-543-2 29 46.2 65 9O-B2-36-3 38 9.5 24.3 25.4 9O-B3-26-587 2.79 29 46 65 9O-B2-36-646 44 9 329 46 9O-B2-26-825 4.5 294 546 68 9O-B25-48-554 52.5 96 27 6 9O-B6-228-22 2.7 294 546 68 9O-B25-48-986 58 2 289.64 24 9O-B4-225-536 4.8 34 57.9 55.9 9O-B22-44-49 24.5 2 289.5 23.75 9O-B4-225-36 4.8 34 58 56 9O-B2-44-4 28 2 29 24 9O-B4-225-49 5.6 34.8 64.4 4.8 9O-B4-473-586 46 2 34 3 9O-B3-252-6 7.3 34.8 64.4 4.8 9O-B4-473-586-46 2 39 24 9O-B3-228-46 5.5 35 57 56 9O-B2-46-42 28 2 399 66 9O-B25-3-25 38.5 323.6 52.29 54. 9O-B25-422-53 46 2 365 44.5 9O-B6-287-82 2 323.9 52.3 53.8 9O-B25-422-854 48 2 365 4 9O-B2-289-295-2 8 324 56 66 9O-B25-45-695 48 22.8 45.7 5 9O-B22-343-62 39 325 55 48 9O-B25-45-853 4 25.9 3 25.4 9O-B3-26-324 7.5 325 55 66 9O-B25-45-2 43 29.2 59.6 6.6 9O-B25-43-79 22 325 55 66 9O-B25-46-98 46 22 3 24 9O-B4-247-766 6 333 58 72 9O-B3-446-52 66 22 3 24 9O-B4-247-45 6 335 475 45 9O-B2-45-229 27 232 4 46 9O-B2-38-945-24.5 342 486 56 9O-B2-44-684 27.5 26
Single-row d T D Single-row Single-row Boundary Dimensions Designation Weight Boundary Dimensions Designation Weight d D T G d D T G [mm] [kg] [mm] [kg] 342 486 56 9O-B2-44-684-27.5 47 632 67 9O-B25-55-224 S 59 342 486 56 9O-B2-44-596 29 472 66 56 9O-B2-544-553 36 348 57 58 9O-B2-46-357 65 497.8 669.8 64.3 9O-B22-584-6 59 355 455 25 9O-B4-45-578 55 67 7 9O-B2-59-27 54 355.6 52.34 5.8 9O-B25-442-7 4.5 55 67 7 9O-B2-59-27 HL 54 356 57 95 9O-B33-46-264 73 55 67 7 9O-B2-59-5 6 36 5 44 9O-B2-43-93 25 55 67 7 9O-B2-59-5 HL 6 36 587 76 9O-B32-475-563 64 55 76 48 9O-B2-64-96 73.5 366 577 53.5 9O-B25-44-74 4.5 56.426 736.6 82.55 9O-B57-63-38 29 366 579 54 9O-B25-44-27 42.5 56.933 736.6 82.55 9O-B57-63-755 29 366 579 54 9O-B25-44-27 HL 42.5 52 68 49 9O-B2-595-932 46 37 6 75 9O-B32-486-35 78 52 68 49 9O-B2-595-932-46 378 589.5 75 9O-B32-474-8 6 559 76 38 9O-B22-66-32 55.5 378 589.5 75 9O-B32-474-58 63.5 572 76 56 9O-B2-644-824 44 378 67 72 9O-B25-474-555 54 572 76 56 9O-B2-644-824-44 38 65 72 9O-B25-474-293 54 628.65 89.5 5.8 9O-B25-724-82 79 383 584.96 74.9 9O-B25-475-849 65 628.7 927. 96.8 9O-B45-778-653 25 386 455 4 9O-B3-48-885 5 634 848. 55.9 9O-B22-744-489 43.5 4 545 59 9O-B25-475-289 4 634 848. 55.9 9O-B22-744-489-43.5 4 6 76 9O-B3-56-2 73 634 848. 55.9 9O-B22-744-489-2 43.5 4 6 76 9O-B3-56-42 76 634 848. 55.9 9O-B22-744-699 67 42.8 643.5 95.3 9O-B32-52-89 2.53 634.2 835.66 6.66 9O-B2-744-85 75 42 65 65.5 9O-B6-486-656 52 648 776 48 9O-B25-64-969 79 434 648 56 9O-B2-544-43 37 665 65 9O-B57-892-928 357 434. 648 55.88 9O-B22-544-429 32 665 65 9O-B5-9-773 343 435 647 56 9O-B2-546-44 37 667 848 89 9O-B25-762-88 5 44 69 69 9O-B25-55-272 87 673. 85.9 63.5 9O-B25-762-99 8.5 44 69 69 9O-B25-55-272-2 87 734. 947.9 55.9 9O-B2-844-879 7 44 69 69 9O-B25-55-272 HL 87 742 832 4 9O-B3-787-23 3.5 445 66 56 9O-B2-544-88 43 742 832 4 9O-B3-787-23-3.5 457 692 86 9O-B22-572-727 5 748.3 984 98.6 9O-B32-868-937 7 46 6 45 9O-B2-53-228 36 77 97 68 9O-B3-87-874 3 464 78 9 9O-B4-586-43 2 776 59 6 9O-B3-885-979 66 468 74 86 9O-B4-586-337 8 8 9 4 9O-B3-854-6 27 47 632 46 9O-B25-55-223 S 37.5 834 48 56 9O-B2-944-666JU 53 27
FOUR-POINT CONTACT BALL SLEWING RINGS without gear special Single-row d T D Single-row Boundary Dimensions Designation Weight d D T G [mm] [kg] 834 48 56 9O-B2-944-666JUA 53 834 48 56 9O-B2-944-99 53 85.9 89.2 79.2 9O-B32-97-9 52 855 55 63 9O-B25-955-535 3 855 55 63 9O-B25-955-535-9 872 6 56 9O-B2-94-357 S 7 876 2 5 9O-B3-984-943 2 878.6 2 74 9O-B3--38 62 878.6 22 72 9O-B3--887 65 88 23.5 42.5 9O-B7-945-426 49.5 89 2 56 9O-B2-944-772 3 935 95 93 9O-B35-65-474 27 952.5 93.8 78.7 9O-B32-95-7 226 964 98 56 9O-B22-94-6.5 984 98 56 9O-B2-94-823 63 984 98 56 9O-B22-94-767 8 984 98 56 9O-B22-94-27 8 985 2 56 9O-B2-93-94 7 985 2 56 9O-B2-93-94-7 27 447 65 9O-B36-282-422 28 55 485 66 9O-B7-35-83 759 84 524 25 9O-B5-354-256 544 27. 562.6 34.9 9O-B45-422-89 577 484 746 86 9O-B25-627-225 33 562 24 2 9O-B45-848-95 954 628 927 3 9O-B5-778-2 7 8 985 8 9O-B25-898-27 262.5 293.9 2343.2 85.7 9O-B32-229-83 442 37 327.8 85.7 9O-B32-345-72 67 28
Double-row d T D Double-row Boundary Dimensions Designation Weight d D T G [mm] [kg] 2 8 9O-2B2-5-62 2 356 57 34 9O-2B3-46-328 78 86 9O-2B2-884-942 99 793 948 25 9O-2B2-84-86 7 895 79 82 9O-2B2-97- 37 22 279 29 9O-2B6-25-329 3845 269 36 65 9O-2B4-285-282 22 32 368 23 9O-2B6-349-343 3753 29
FOUR-POINT CONTACT BALL SLEWING RINGS with external gear n x N G a Single-row n2 x N2 G 2a D J d d S 2 2 T H B G 2b H2 G c G 2c J D D Single-row Boundary Dimensions Designation Weight Abutment Dimensions Mounting Holes N Mounting Holes N 2 d D T G J J 2 N N 2 Number n Hole Type Number n 2 Hole Type [mm] [kg] [mm] 24.5 244 35 9E-B4-79-624-7.5 24 44.5 24 A (2-) A 35 259.36 35 9E-B4-88-29 7.5 222 54 M M 6 C 6 D 35 258 35 9E-B6-88-85 7.5 222 54 M M 6 C 6 D 45 32.6 5 9E-B2-222-78 7 27 75 5/8- UNC 5/8- UNC 8 C (6-2) C 45 32 5 9E-B2-223-287 6.5 27 75 5/8- UNC 5/8- UNC 6 C (6-) C 45 36 5 9E-B2-223-4 6.5 27 75 M4 M4 6 C (6-) C 7 38.6 4 9E-B7-235-82 3 275 95 3 3 2 A 2 A 79 342 42 9E-B6-258-996 6 3 2 3 M2 24 A (24-) C 27.9 373. 5 9E-B2-288-72 22.5 335 24 5/8- UNC 5/8- UNC 6 C 8 C 2 373 4. 9E-B2-287-983 9.5 335 24 4.3 4.3 6 A (2-) A 2 373 5 9E-B2-289-674-2 2 335 24 5/8- UNC 5/8- UNC 32 C 2 C 2 373 5 9E-B2-289-674 2 335 24 5/8- UNC 5/8- UNC 6 C 2 C 23 35 45 9E-B5-282-23 4.5 35.7 248.3 M M 8 E 8 E 234 43.5 55 9E-B2-37-733 23.5 358 259 3 3 24 A 2 A 235 43.5 55 9E-B22-38-397 23 358 259 3 3 3 A (28-) A 235 43.5 55 9E-B22-38-443 23.5 358 259 3 3 3 A (28-) A 235 43.5 55 9E-B2-39-549 24 358 259 3 3 24 A (28-) A 263.5 434 5 9E-B22-343-67 27 39 295 5/8- UNC 5/8- UNC 8 C (24-) C 263.5 434 5 9E-B22-344-396 27 39 295 5/8- UNC 5/8- UNC 8 C (24-) C 264.9 434 5.8 9E-B2-343-667 28 39 295 4 4 8 A 24 A 264.9 434 5.8 9E-B22-343-768 27 39 295 4 4 8 A 24 A 265 432.3 5 9E-B2-345-53 24.5 39 295 7 7 8 A 24 A 265 433.5 5 9E-B2-345-286 25.5 39 295 7 5/8- UNC 8 A 24 C 265 433.5 5 9E-B2-345-273 25.5 39 295 5/8- UNC 5/8- UNC 8 C 24 C 265 433.5 57 9E-B2-343-762 28 39 295 5/8- UNC 5/8- UNC 8 C 24 C 265 434 5 9E-B2-345-3 28.5 39 295 /2-3 UNC 4 8 C 8 A 34 55.5 56 9E-B2-4-6 37.5 457.2 333.5 M2 7.5 24 D (24-) B 35 535 75 9E-B25-4-59 58 466 336 2 2 8 A 8 A 323.7 52.3 54 9E-B25-422-966 46 479.4 365. 6.3 6.3 2 A 2 D 323.7 52.3 54 9E-B25-422-285 46 479.4 365. 5/8- UNC 5/8- UNC 2 D 2 D 323.7 537.2 57.2 9E-B25-422-627 47 479.4 365. 3/4- UNC 2.7 8 E 6 A 323.8 52.3 54 9E-B25-422-76 44 479.4 358.8 5/8- UNC 3/4- UNC 24 C (2-) C 323.9 52.3 57.2 9E-B25-422-989 45 479.4 365. 5/8- UNC 5/8- UNC 2 D 2 D 324 52.3 54 9E-B25-422-779 46 479.4 365. 6.3 5/8- UNC 2 A 2 D 324.4 52.3 6.5 9E-B25-422-86 44.5 479.4 365. 5/8- UNC 3/4-6 UNF 2 C 2 C 3
Mounting holes types A B C Lubrication spots types a b c d e D E F f g h ch i Other Specifications Permissible Lubrication Spots Note No. Notes Circumferential Force D d 2 H H 2 B m (DP) z x F TDov F Tmax Type Size Location Number [mm] [kn] 3 3 28 2 2 4 8 a AM8x G2b 2 Lubricating hole without a thread 238 35 3 3 26 4 62 +.5 2 f Gc 2 2 Thread in mounting holes has a depth of 3 238 35 3 3 26 3 84 6 2 a AM8x G2b 3 The outer ring piloted on the inner diameter 44 44 44 DP5/7 6 9 38 c /8-27 NPT G2b 4 Thread in mounting holes has a depth of 32 44 44 44 DP5/7 6 3 26 f /8-27 NPT G2b 2 5 Thread in mounting holes has a depth of 25.4 44 44 44 4 77 3 26 f Gc 2 234 73 35 35 35 4 78 2 f M8x G2a 2 3 258.5 8 35 37 3 3 2 7 4 f M8x G2a 2 3 43.9 43.9 43.9 DP5/7 72 2 4 e /8-27 NPT G2b/G2c / 38. 38. 38. DP5/7 72 8 36 f /8-27 NPT G2b 2 44 44 38 DP5/7 72 8 36 f /8-27 NPSF G2b 4 44 44 38 DP5/7 72 8 36 f /8-27 NPSF G2b 4 4 4 4 3.5 98 3 26 f 7/6-2 UNF G2a 38 234.9 45 43 4 DP5/7 78 9 38 f /8-27 NPT Gc 43 46 37 4.5 88 3 26 h AM6x Ga 2 3 235 46 46 42 5 79 6 32 h AMx Ga 2 3 38 235 43 46 37 4.5 88 3 26 g Mx Ga 2 344.5 263.5 43.9 43.9 43.9 DP5/7 84 2 42 a /8-27 NPT G2b 3, 4 44 44 44 DP5/7 84 2 42 f /8-27 NPT G2b 2 44.5 44.5 44.5 DP5/7 84 2 42 c /8-27 NPT Ga 4 44.5 44.5 44.5 DP5/7 84 2 42 c /8-27 NPT Ga 4 347 265 43 43 38 3 43 -.45 9 8 f M8x G2b 2 3 43 43 43 DP5 84 2 4 f /8-27 NPT G2b 2 2 43 43 43 DP5/7 84 2 4 f /8-27 NPT G2b 2 5 43 44 DP5/7 84 2 42 f /8-27 NPT G2b 44 44 44 DP5/7 84 2 42 f /8-27 NPT G2b 5 42 46 46 46 DP4 78 24 48 a AM8x G2b 2 3 495 36 63 63 55 8 65 33 66 a AMx G2b 3 52.3 52.3 52.3 DP5/7 3 62 f /4-28 UNF G2b 323.7 52.3 52.3 52.3 DP5/7 26 52 f /8-27 NPT G2b 2 5.8 5.8 5.8 DP4 83 3 6 a /8-27 NPT G2b 5.3 52.3 5.3 DP5/7 25 5 f /8-27 NPT G2b 5.8 5.8 5.8 DP5/7 25 5 a /8-27 NPT G2b 52.3 52.3 52.3 DP5/7 26 52 f /4-28 UNF G2b 52.3 52.3 52.3 DP5/7 26 52 a /4-8 NPT G2b 3
FOUR-POINT CONTACT BALL SLEWING RINGS with external gear n x N G a Single-row n2 x N2 G 2a D J d d S 2 2 T H B G 2b H2 G c G 2c J D D Single-row Boundary Dimensions Designation Weight Abutment Dimensions Mounting Holes N Mounting Holes N 2 d D T G J J 2 N N 2 Number n Hole Type Number n 2 Hole Type [mm] [kg] [mm] 326.5 6.7 87.6 9E-B45-452-742 6 539.7 365. 2.6 2.6 8 A (24-) A 327.2 6.7 96.8 9E-B45-452-59 8.5 539.7 365. 3/4- UNC 2.6 8 D (24-) A 327.2 6.7 96.8 9E-B45-452-59-7 539.7 365. 3/4- UNC 3/4- UNC 24 D (24-) D 327.2 6.7 87.4 9E-B45-453-32 4.5 539.7 365. 3/4-6 UNF 3/4-6 UNF 8 D (24-) D 33.2 584.2 88.9 9E-B35-445-57 88.5 57.5 37.5 2 2 8 B (24-) B 362 58.66 73 9E-B22-462-79 69 523.9 43.2 2 2 2 A (3-) A 38 53 48 9E-B6-45-22 3 496 46 M2 M2 8 C 8 C 382 589.5 75 9E-B25-475-345 6 54 4 6 6 8 A 8 A 384 66.9 63.5 9E-B25-486-63 64 546. 422.3 3/4- UNC 2.5 2 E (24-) A 39 654 85 9E-B35-58-227 98 582 432 2 2 3 A (3-) A 392 654 85 9E-B3-57-548 88 582 432 2 2 3 A (3-) A 42.8 654. 88.9 9E-B32-52-926 3.5 59.6 447.7 3/4- UNC 2.5 2 E 24 A 47 688.8 72 9E-B25-537-96 9.5 65 469 M24 26 3 E (3-) A 42 6 63 9E-B25-55-368 54 56 45 6.5 6.5 6 A 6 A 422. 724.7 98 9E-B45-557-84 6 644.7 468.3-8 UNC -8 UNC 32 D (32-) D 43 72.4 9 9E-B45-559-897 7 644.7 473 2 2 24 A 28 A 43.8 657.9 87.4 9E-B3-533-947 92 6. 466.7 3/4- UNC 2 24 D 24 A 43.8 72.4 87 9E-B4-559-457 38 644.7 473 2 2 24 B 28 B 45 67 97.5 9E-B32-548- 94.5 66.4 489 6.5 6.5 48 A 36 A 465. 667.7 57. 9E-B25-559-964-63.5 622.3 495.3 3/4- UNC 3/4- UNC 8 E 8 E 465. 667.7 57. 9E-B25-559-964-2 63.5 622.3 495.3 3/4- UNC 3/4- UNC 36 E (36-) E 468.9 683.3 7 9E-B25-569-93 8 627.4 5.2 3/4-6 UNF 3/4-6 UNF 36 E (36-) E 474 64.3 56 9E-B2-545-247 4.5 585 498 M2 M2 28 E 32 E 477.8 78.7 82.6 9E-B25-584-365 647.7 52.7 3/4- UNC 3/4- UNC 24 E 24 E 479 695 77 9E-B32-574-576-77 64 58 8 8 36 A (36-) A 479 695 77 9E-B25-574-924 8.5 64 58 M2 M2 8 C 8 C 482.6 759. 92 9E-B4-63-632 44 695.3 523.9 3/4- UNC 23.8 36 D (3-) A 485.7 759 92 9E-B45-69-65 48 695.3 523.9 3/4- UNC 3/4- UNC 3 D (3-) D 529 732 63 9E-B2-63-77 7 669 559 M6 7.5 24 D 24 A 534. 74.4 56 9E-B2-64-57 63 692.2 562. /2-3 UNC 7.5 5 D 8 B 545 765.4 68 9E-B25-64-5 84 7 58 M6 7.5 24 F 24 A 552.5 86 24 9E-B32-678-43 67 753 64 2.5 2.5 36 A (36-) A 556 742.3 53.5 9E-B2-644-28 5 685 595 M2 3.5 44 C 44 B 558.8 87. 95.3 9E-B3-679-868 3 749.3 67. 24 24 2 A 24 A 558.8 849.4 84 9E-B4-69-49 56.5 768.4 66.4 3/4- UNC 2.5 28 D 28 A 32
Mounting holes types A B C Lubrication spots types a b c d e D E F f g h ch i Other Specifications Permissible Lubrication Spots Note No. Notes Circumferential Force D d 2 H H 2 B m (DP) z x F TDov F Tmax Type Size Location Number [mm] [kn] 82 82 82 DP4/5 93 59 8 a /8-27 NPT G2b 2 Lubricating hole without a thread 87.4 87.4 87.4 DP4 93 52 4 f /8-27 NPT G2b 2 2 Thread in mounting holes has a depth of 3 33.2 87.4 87.4 87.4 DP4 93 52 4 a /8-27 NPT G2b 3 The outer ring piloted on the inner diameter 82.6 82.6 82.6 DP4 93 5 a /8-27 NPT G2b 4 Thread in mounting holes has a depth of 32 332 79.5 79.5 79.5 DP4 9 4 8 f /8-27 NPT G2a/G2c / 5 Thread in mounting holes has a depth of 25.4 466.7 363. 7 54 7 DP4 9 35 7 f /8-27 NPSF G2b 3 38.5 39 39 39 3 75 9 8 f M8x G2b 2 565 384 6 6 4 4.5 29 4 28 a AMx Ga 2 55.4 55.4 55.4 DP4 94 33 66 a /8-27 NPT G2b 392 73 73 6 8 8 44 88 f Mx G2b 3 6 392 73 66 6 8 8 33 66 a AMx G2b 3 85.7 73 85.7 DP4 44 88 f /8-27 NPT G2b 54 47 63 59 63 6 2 +.5 24 48 f 8 Gc 2 55 55 55 5 2 22 44 a AMx Ga 2 92.2 92.2 92.2 DP3 84 47 94 a /8-27 NPT G2b 98 98 98 DP4 2 72 44 a /8-27 NPT G2b 77.7 65 77.7 DP4 2 47 94 a /8-27 NPT G2b 82 82 82 DP4 2 5 f /8-27 NPT G2b 64 454.6 8 8 7 DP4 4 43 86 f /8-27 NPTF G2b 2 466.8 54. 54. 5.8 DP5/7 3 +.65 25 5 a /8-27 NPT G2b 466.8 54. 54. 5.8 DP5/7 3 +.65 25 5 a /8-27 NPT G2b 573.5 469.3 67 54 67 DP4/5 6 4 8 a /8-27 NPT G2b 3 44.5 44.5 44.5 6 5 9 38 f M8x G2b 4 583.7 479.5 73.2 65 73.2 DP4 22 44 a /8-27 NPT G2b 2 3 67 48 64 64 42 5 37 22 a AMx Ga/G2b 2/2 37 48 64 64 42 5 37 2 4 a AMx Ga 2 482.6 82.6 82.6 75.2 DP3.5 3 52 4 a /8-27 NPT G2b 489 82.6 82.6 82.6 DP3.5 3 58 6 a /8-27 NPT G2b 2 53 53 53 6 2 23 46 a AMx G2b 2 46 46 46 DP4 5 28 56 h /4-28 UNF G2b 4 59 53 59 8 92 + 45 9 f Mx G2b 3 92 92 82.5 6 32 57 4 f /8-27 NPT G2b 2 44.5 44.5 44.5 6 22 2 4 h/a AM8x Ga/G2b 4/4 682 56 78. 75.3 73 DP3.5 5 a /8-27 NPT G2b 2 3 76.2 76.2 76.2 DP2.5 82 86 72 a /8-27 NPT G2b 4 33
FOUR-POINT CONTACT BALL SLEWING RINGS with external gear n x N G a Single-row n2 x N2 G 2a D J d d S 2 2 T H B G 2b H2 G c G 2c J D D Single-row Boundary Dimensions Designation Weight Abutment Dimensions Mounting Holes N Mounting Holes N 2 d D T G J J 2 N N 2 Number n Hole Type Number n 2 Hole Type [mm] [kg] [mm] 577 829.9 68 9E-B3-685-677 2 753 67 22 22 24 A 24 A 69.3 867.9 4.9 9E-B3-725-9 68 796.9 654 3/4- UNC 3/4- UNC 36 D (36-) D 635 849.4 55.9 9E-B2-74-999 75.5 787.4 673. /2-3 UNC /2-3 UNC 3 D 3 D 654 892.8 74.7 9E-B32-762-69 37 83.9 692.2 3/4- UNC 3/4- UNC 3 E 3 E 666.8 869.7.6 9E-B25-762-998 38 8. 74.9 3/4- UNC 3/4- UNC 3 D 3 D 667 888 69 9E-B25-762-32 7 89 73 M6 7.5 32 D 32 A 676.4 892.8 79.5 9E-B3-772-664 22 835 78 7 7 3 B 36 B 679 863 82 9E-B25-765-347 97 8 76 M6 M6 24 D 24 E 75 952 76 9E-B25-82-249 28 87 754 M6 M6 32 E 32 E 75 979 9E-B35-823-75 73.5 893 753 22 22 36 A 36 A 75 979 94 9E-B35-823-933 52.5 893 753 22 22 36 A 36 A 77.6 98.7 25 9E-B45-854-545 253 98 762-8 UNC 28.6 24 D (3-) A 77.6 98.7 25 9E-B45-854-343-25 98 762-8 UNC -8 UNC 36 D (36-) D 727.2 23.6 4.8 9E-B32-848-938 235.5 92.8 774.5 24 7/8-9 UNC 36 A (36-) D 73 6.6 98 9E-B35-845-476 96 92 77 M2 M2 2 E 2 E 73.3 62.7 82.6 9E-B4-876-5 24 965.2 787.4 27 27 2 A 24 A 778 2 8 9E-B4-9-345 25 99 83 26 26 4 A (4-) A 87 72.9 8 9E-B25-92-62 67.5 99.6 857.3 2 3/4- UNC 4 A 4 E 828.5 93.2 88.9 9E-B32-94-4 85 2.8 866.8 2 3/4- UNC 36 A (36-) E 828.8 93.2 96.8 9E-B32-94-86 9 2.8 866.8 24 24 36 A 36 A 828.8 93.2 96.8 9E-B32-94-96 9 2.8 866.8 24 24 36 A 36 A 835.2 62.7 88.9 9E-B32-933-53 74 993.8 873. 7/8-9 UNC 7/8-9 UNC 3 D 3 D 86.8 74.5 96.8 9E-B4-2- 264 87.4 96 7/8-9 UNC 24 3 E 3 A 863. 74.5 96.8 9E-B4-2-25 265 87.4 96 2 3/4- UNC 36 A 36 E 873.3 63.3 7.5 9E-B35-995-954 45 7 92.8 24 24 32 A 36 A 882.6 83.4 9E-B25-985-796 5 5 922 3/4- UNC 2 3 D 3 A 885 73.6 82 9E-B32--223 98 7 929 22 22 52 A (52-) A 887.7 89 9.4 9E-B25-978-533 32 5 922 M6 8 3 D 3 A 889 24.7. 9E-B4-29-652 37 4.4 943-8 UNC -8 UNC 3 D 3 D 894.5 78 82 9E-B25-969-25 26.5 5 922 M6 M6 3 D 3 D 894.5 78 9 9E-B25-969-289 25 5 922 M6 M6 3 D 3 D 895 77.7 82 9E-B22-975-73 27 5 922 M6 7.5 24 D 24 A 955 324 37 9E-B45-5-329 48 2 M24 26 42 F 42 A 96 26.7 8 9E-B3-72-836-28 45 997 7.5 7.5 3 B 3 B 976 2 9E-B35-77-542-237 35 2 M8 9 4 D 4 B 34
Mounting holes types A B C Lubrication spots types a b c d e D E F f g h ch i Other Specifications Permissible Lubrication Spots Note No. Notes Circumferential Force D d 2 H H 2 B m (DP) z x F TDov F Tmax Type Size Location Number [mm] [kn] 579 6 6 6 8 2 25 5 a AMx G2b 4 Lubricating hole without a thread 85.9 88.9 85.9 DP3.5 8 6 2 a /8-27 NPT G2b 2 Thread in mounting holes has a depth of 3 45.7 45.7 45.7 DP2.5 82 43 86 a /8-27 NPT G2b 2 3 The outer ring piloted on the inner diameter 65 65 65 DP4/5 39 4 8 a /8-27 NPT G2b 2 4 Thread in mounting holes has a depth of 32 67. 89 82.6 89 DP2.5 84 22 a /8-27 NPT G2b 2 5 Thread in mounting holes has a depth of 25.4 6 57 6 8 8 +.6 56 2 f Mx G2b 4 679.5 7.4 7.4 7.4 DP4/5 39 55 c /8-27 NPT G2b 2 77.5 68 68 65 6 6 42 34.5 69 f Mx G2b 2 3 84 724 67 62 6 92 +.7 55 f M8x G2b 2 3 933 78 83 84 67 94 +. 44 88 f Mx Ga/G2b 4/4 845 78 74 74 74 94 +. 7 42 f Mx G2b 4 3 858.3 72.9 5.6 95.25 83 DP4 53 6 2 f /8-27 NPT G2b 4 3 858.3 72.9 5 95.25 83 DP4/5 53 5 f /8-27 NPT G2b 2 3 95.3 85.7 95.3 DP2 79 222 a /8-27 NPT G2b 2 73 8 79 7 8 22 54 8 f G /4 G2a 4 73.5 73.5 66.8 DP2.5 3 54 8 a /8-27 NPT G2b 2 78 72 72 72 2 89 +.5 2 f Mx G2b 4 7 7 7 DP2.5 4 82 64 f M6 G2b 4 83.8 69.9 79.2 69.9 DP2.5 6 82 64 a /8-27 NPT G2b 2 69.9 87.4 69.9 DP2.5 6 82 64 a /8-27 NPT G2b 2 69.9 87.4 69.9 DP2.5 6 68 36 f /8-27 NPT G2b 2 76.2 76.2 76.2 DP2.5 3 74 48 f /8-27 NPT G2b 2 76.2 87.4 76.2 DP2.5 4 74 48 f /8-27 NPT G2b 2 76.2 87.4 76.2 DP2.5 4 74 48 a /8-27 NPT G2b 2 92.2 92.2 76.2 DP2 9 9 82 a /8-27 NPT G2b 4 9.3 66.8 66 DP2.5 5 64 28 f /8-27 NPT G2b 2 885 68 68 68 2 95 +.5 79 58 f Mx G2b 6 984.2 89 75 67 75 9 9 65 3 a AMx G2b 3 3 85.9 87.4 85.9 DP2.5 7 2 a /8-27 NPT G2b 2 7 7 6 8 3 +.7 55 f Mx G2b 3 987 7 7 6 8 3 +.7 55 f Mx G2b 3 3 387 72 67 64 8 3 +.475 59 8 a AMx G2b 4 3 5 96 22 7 4 9 +.93 54 38 a AMx G2b 4 3 87 96 7 7 55 6 92 +.5 33 66 f Rp /4 G2a 6 8 48 53 6 f Mx G2b 4 35
FOUR-POINT CONTACT BALL SLEWING RINGS with external gear n x N G a Single-row n2 x N2 G 2a D J d d S 2 2 n x N G a Double-row n2 x N2 G 2a D J d d S 2 2 T H B G 2b H2 G 2b T H2 H B G 2b * G 2c J G c D D G c G 2c J D D Single-row Boundary Dimensions Designation Weight Abutment Dimensions Mounting Holes N Mounting Holes N 2 d D T G J J 2 N N 2 Number n Hole Type Number n 2 Hole Type [mm] [kg] [mm] 984.3 229.4 88.9 9E-B32-86-53 25 49.4 22.4 7/8-9 UNC 7/8-9 UNC 36 D 36 D 99.4 396.8 2.7 9E-B57-65-388 538 276.4 5.9 33 33 27 A (36-) A 4 2 6 9E-B22-87-5 5 35 35 4 8 36 A 24 A 2 268 9 9E-B3-22-455 22 85 58 M6 7 4 F 4 A 45 358 98 9E-B35-8-83 32.5 26 22 22 4 A 4 A 79.5 45.3 27 9E-B5-224-37 435 32.8 27. 27 27 28 A (36-) A 92.2 377.7.6 9E-B4-23-433 336 29. 35. 23.8 23.8 36 A 36 A 92.2 377.7.6 9E-B4-23-8 336 29. 35. 7/8-9 UNC 24 36 E 36 A 4 332 85 9E-B22-22-342 5 27 7 M8 M8 36 E 36 E 43 46 9E-B4-278-244 44.5 36 95 26 26 4 A 4 A 43 464 9E-B4-278-349 45 36 95 26 26 4 A 4 A 228.9 635.7 8 9E-B5-399-332 598 54.9 292.2 /4-7 UNC 33 3 D 36 A 3 756.8 3 9E-B6-495-3 785 68 382 M33 36 48 E (48-) A 336 673 4 9E-B4-476-838 453 56 39 M24 26 4 E 4 A 49.2 9 6.9 9E-B75-64-753 26 784.4 485.9 /4-7 UNC /4-7 UNC 45 D (48-) D 53.9 95 9. 9E-B5-7-95 734 85 595 3 3 48 A 48 A 68 228 2 9E-B4-83-52 62 95 745 3 3 48 A 48 A 72 288 5 9E-B5-865-82 96 97 756 26 26 36 A 36 A 725 274 7 9E-B6-98-358 347 22 796 33 33 4 B 4 A 839 229 28 9E-B6-22-24 9 235 95 33 33 76 A (76-) A 94 244 4 9E-B6-24-24 43 229 2 33 33 48 B 48 A 2765 326 56 9E-B5-2944-2 89 35 282 33 33 3 A 3 A 294 398 9 9E-B32-33-399 688 34 2958 22 22 48 A 48 A 34 3866.4 85 9E-B6-3585-387 262 37 346 33 33 78 A 78 A Double-row 47 688.8 2 9E-2B25-539-9 37 65 469 M24 26 3 E (3-) A 895 77.7 9E-2B2-97-2 59 5 922 M6 7.5 36 D 42 A 772 24 25 9E-2B3-875-79 525 94 8 M2 M2 48 D 48 E 879 2226 75 9E-2B4-2-97 8 25 9 M3 33 6 D 6 E 36
Mounting holes types A B C Lubrication spots types a b c d e D E F f g h ch i Other Specifications Permissible Lubrication Spots Note No. Notes Circumferential Force D d 2 H H 2 B m (DP) z x F TDov F Tmax Type Size Location Number [mm] [kn] 76.2 76.2 76.2 DP2.5 9 62 24 a /8-27 NPT G2b 2 Lubricating hole without a thread.25.25.6 DP.578 8 24 248 f /8-27 NPT G2b 2 2 Thread in mounting holes has a depth of 3 6 5 47 53 4 8 48 23 46 f Mx G2b 4 3 The outer ring piloted on the inner diameter 8 62 8 23 +.9 77 54 f Mx G2b 4 4 Thread in mounting holes has a depth of 32 85 5 88 8 88 33 +.5 85 7 f Mx G2b 4 3 5 Thread in mounting holes has a depth of 25.4 82.6 4.3.6.6 DP.5 84 +.752 6 32 f /8-27 NPT G2b 2 85.85 88.9 82.6 DP2.5 34 8 6 f /8-27 NPT G2b 2 85.9 88.9 82.6 DP2.5 34 8 6 a /8-27 NPT G2b 2 7 59 5 6 22 a Mx G2b 3 95 44 9 82 a Mx G2b 4 43 95 2 2 f Mx Ga 4 232. 98.6 98.6 98.6 DP.5 95 a /8-27 NPT G2b 2 2 2 9.5 6 7 +.5 f Mx G2b 8 96 84 96 3 25 +.846 2 24 f Mx G2b 2 42 52.4 52.4.6 DP2 48 24 248 a /8-27 NPT G2b 4 9.5 9.5 9.5 88 +.8 6 22 a /8-27 NPT G2b 4 9 9 2 +.4 72 44 f Mx G2b 6 75 27 2 25 +.9 97 94 f Mx G2b 6 9 73 6 5 5 8 8 +.5 a Mx G2b 8 3 8 8 228 -.5 88 76 f Mx G2b 2 2356 3 3 2 6 5 +.3 84 368 a AMx G2b 6 2765 7 5 7 2 58 +.5 226 452 f Mx G2b 6 334 77 77 77 38 f Mx G2b 2 3 38 78 38 8 22 +.5 h AMx G2b 3 54 47 93 89 63 6 2 +.5 36 72 f 8 Gc 4 89 94 68 8 3.5 53 6 f Mx G2b/G2b* 2/2 9 2 68 86 72 f Mx G2b/G2b* 4/4 45 68 2 4 56 +.5 62 324 a AMx G2b/G2b* 6/6 37
FOUR-POINT CONTACT BALL SLEWING RINGS with external gear special Single-row d T D Single-row Single-row Boundary Dimensions Designation Weight Boundary Dimensions Designation Weight d D T G d D T G [mm] [kg] [mm] [kg].6 238.8 38 9E-B2-63-626 9 2 373 4. 9E-B2-287-442 9.5.6 238.8 49 9E-B22-63-67 2 373 4. 9E-B2-287-659 9.5.6 238.8 49 9E-B22-63-547 2 373 4. 9E-B2-287-659-9.5.6 239 56 9E-B2-63-744-A5 2 373 4. 9E-B2-287-659-2 9.5 24.5 244 35 9E-B4-79-624 8 2 373 5 9E-B2-289-674-2 25 244 25 9E-B3-8-89 5.5 2 373 5 9E-B2-289-763 2 44.8 32. 5 9E-B2-223-899 8 235 42. 58 9E-B2-3-346-B9 27.8 45 34.2 5 9E-B22-223-593 7.5 235 43.5 55 9E-B22-3-97 24.5 45 36.6 5 9E-B2-223-54 8 235 43.5 55 9E-B22-3-97-24.5 45 36.6 5 9E-B2-223-2 8 26 437.3 5 9E-B2-338-6 28 45 36.6 5 9E-B2-223-282 8 265 434.8 5 9E-B22-343-592 26.5 45 36.6 5 9E-B2-22-493 6.5 265 437.3 5 9E-B2-345-22 3 45 36.6 5 9E-B2-223-72-A 7 265 437.3 5 9E-B2-345-22-25.5 45 36.6 5 9E-B2-223-72-A2 7 265 437.3 5 9E-B2-345-28 29 45 36.6 5 9E-B2-223-72-A3 7 265 437.3 5 9E-B2-345-492 25.5 45 36.6 5 9E-B2-223-72-A4 7 265 437.3 5 9E-B2-343-54 28 45 36.6 5 9E-B2-223-72-A5 7 265 437.3 5 9E-B2-343-698 28 45 36.6 5 9E-B2-223-72-A6 7 265 437.3 5 9E-B2-343-79-A 28 45 36.6 5 9E-B2-223-72-A7 7 265 437.3 5 9E-B2-343-79-A2 28 45 36.6 5 9E-B2-223-72-A8 7 265 437.3 5 9E-B2-343-79-A3 28 45 322.3 83 9E-B22-226-37-D5 27.6 265 437.3 5 9E-B2-343-79-A4 28 45 322.3 83 9E-B22-226-372-H5 29.2 265 437.3 5 9E-B2-343-79-A5 28 45 342.4 84 9E-B2-223-794-D 32 265 437.3 5 9E-B2-343-79-A6 28 45 342.4 84 9E-B2-223-794-D4 32 265 437.3 5 9E-B2-343-79-A7 28 72 354 45 9E-B4-289-787 9.5 265 437.3 5 9E-B2-343-79-A8 28 72 354 45 9E-B4-289-787-9.5 265 437.5 8 9E-B2-343-74-37 79 342 42 9E-B6-254-7 6.5 265 437.5 8 9E-B2-343-74-4 37 79 342 42 9E-B6-254-7-6.5 265 439 5 9E-B2-345-28 3 79 349 47 9E-B6-26-973 9 265 469 84 9E-B2-343-977-H 5.3 79 349 47 9E-B6-26-973-9 265 469 84 9E-B2-343-977-H4 5.5 8 342 42 9E-B6-254-37 7 265.9 434 4. 9E-B2-343-298 23 9 348 45 9E-B2-26-786 8 29.3 464.5 4. 9E-B22-374-73 28 95 373 56 9E-B25-278-48 25 29.3 464.5 4. 9E-B22-374-73-28 95 373 56 9E-B25-278-48-24.5 34 55.5 55.9 9E-B22-42-3 4 2 373 4 9E-B2-287-499 8.5 34 55.5 56 9E-B22-44-77 3 38
Single-row d T D Single-row Single-row Boundary Dimensions Designation Weight Boundary Dimensions Designation Weight d D T G d D T G [mm] [kg] [mm] [kg] 34 55.5 56 9E-B2-4-982 32 383 589.5 75 9E-B32-475-47 58.5 34 55.5 56 9E-B2-4-982-32 386 483.7 4 9E-B3-48-886 6 39 53.2 7.4 9E-B32-49-398 68 39 654 85 9E-B35-58-23 94 39 53.2 7.4 9E-B32-42-58-7 392 492.2 4 9E-B4-422-5 2.7 32.5 6.7 4.9 9E-B4-453-949 2 392 492.2 4 9E-B4-422-5-2.7 32.5 67. 87.4 9E-B45-453-36 5 42.8 643.5 95.3 9E-B32-52-65 38.5 322.3 52.3 54 9E-B22-422-63 44 42.8 65.5 88.9 9E-B32-52-2 7 322.6 52.3 52.4 9E-B25-422-867 45.5 42.8 65.5 88.9 9E-B32-52-469 7 323.7 52.3 54 9E-B25-422-354 46 42.8 65.5 88.9 9E-B32-52-469-7 323.7 537.2 57.2 9E-B25-422-477 47 42.8 65.5 88.9 9E-B32-52-55 4 323.9 52. 54. 9E-B25-422-48 46 42.8 654 88.9 9E-B32-52-746 7 323.9 52. 54. 9E-B25-422-48-46 42.8 654 88.9 9E-B32-52-746-7 323.9 52.2 55.6 9E-B25-42-869 45 42.8 654 88.9 9E-B32-59-486 3 323.9 52.2 55.6 9E-B25-42-869-45 42.8 654. 88.9 9E-B32-52-99 7 323.9 58.7 56 9E-B25-422-594 46 43 654 89 9E-B3-52-5 8 323.9 52.3 54 9E-B22-422-68 44 428.6 638.8 56.3 9E-B22-543-875 57.5 323.9 52.3 54 9E-B22-49-94 44 428.8 72.4 98.6 9E-B45-572-522 66 323.9 69.6 95.2 9E-B45-453-23 5.5 428.8 759. 92.2 9E-B35-56-668 73 324 527.8 6 9E-B22-422-56 48 429.3 72.4 4.9 9E-B45-572-956 59.5 324 527.8 6 9E-B22-422-732-A 45 43.8 72.4 87.38 9E-B45-559-465 38 324 527.8 6 9E-B22-422-732-A2 45 43.8 72.4 88.9 9E-B4-559-39 4 324 527.8 6 9E-B22-422-732-A3 45 43.8 72.4 88.9 9E-B45-559-386 4.5 324 527.8 6 9E-B22-422-732-A4 45 434 642 56 9E-B2-54-598 42 324 552 83 9E-B22-422-923-D 74.5 434. 638.8 55.9 9E-B2-525-57 55.5 324 552 83 9E-B22-422-923-D5 74.5 434. 638.8 55.9 9E-B2-525-894 53 327.2 6.7 87.38 9E-B45-453-55 4.5 435. 72.4 87.4 9E-B45-56-955 3 327.2 6.7 87.38 9E-B45-453-55-4.5 435. 72.4 87.4 9E-B45-559-348 45 33 53.8 88 9E-B22-425-9-H9 67 435. 72.4 87.4 9E-B45-559-348-45 33 53.8 88 9E-B22-425-93-H 67 435.5 72.4 87.4 9E-B4-559-4 39 34 629.5 55 9E-B29-5-9 74.6 442 54.6 4 9E-B4-472-984 3.7 34 629.5 55 9E-B25-5-9-79 45.9 693.8 7.4 9E-B25-56-56 9.5 359.2 55.2 5.6 9E-B7-45-925 44.5 465. 667.7 57. 9E-B25-559-964 63.5 36.9 58.66 73 9E-B22-464-62 69 466.6 667.7 57.2 9E-B25-56-5 64 382 595 65 9E-B25-474-723 63 468 683.26 7 9E-B25-569-74 8 382 593 65 9E-B25-474-523 62 479 695 77 9E-B32-574-576 77 39
FOUR-POINT CONTACT BALL SLEWING RINGS with external gear special Single-row d T D Single-row Single-row Boundary Dimensions Designation Weight Boundary Dimensions Designation Weight d D T G d D T G [mm] [kg] [mm] [kg] 479.6 78.7 82.6 9E-B25-584-896 97 654 899.2 75 9E-B32-762-676 27 479.6 766.2 88.4 9E-B45-64-453 5 667 888 69 9E-B25-762-846 7 479.6 766.3 88 9E-B45-64-8 5 69 938 76 9E-B25-832-32 4 479.6 766.3 96.8 9E-B45-64-226 52.5 78.2 98.7 25.5 9E-B45-85-747 257 479.6 766.4 88.9 9E-B45-64-52 5 7 4 84. 9E-B4-838-734 24 479.6 766.4 88.9 9E-B45-64-52-5 7.2 4 84. 9E-B35-838-69 24 479.6 766.4 88.9 9E-B45-64-52 5 7.2 4 84. 9E-B35-838-758 24 479.6 766.6 88.9 9E-B45-63-84 42 7.2 4 84. 9E-B4-838-759 24 479.6 766.6 88.9 9E-B45-63-84-42 74.2 987.2 25.5 9E-B45-857-5 27 482.6 759. 9.9 9E-B4-63-948 43.5 74.2.7.8 9E-B45-854-3 23 482.6 759. 92 9E-B4-63-632-43 74.3 98.7 25.5 9E-B45-857-336 259 482.6 78 93.6 9E-B35-67-2 47.5 74.3 98.7 25.5 9E-B45-857-336-259 494 64.7 54 9E-B4-537-4 29.5 74.3 98.7 25.5 9E-B45-857-347 265 54 74 8 9E-B3-62-356-SR 7 74.4 98.7 25.4 9E-B45-857-47 272 526 84 9E-B2-629-43 235 77.6 98.7 25 9E-B45-854-343 253 535 73 42.5 9E-B2-62-9-HR 48.5 724 952 76 9E-B25-82-248 3 587.5 784.5 55.6 9E-B22-676-7 75 729.2 2 87.5 9E-B5-876-67 297 66.6 823 68 9E-B25-75-662 93 734 944.9 55.9 9E-B2-844-585 7 66.6 823 68.3 9E-B25-75-529 6 734 944.9 55.9 9E-B2-844-585-7 69.6 98.7 79.3 9E-B38-749-526 67 739.7 994.4 79.8 9E-B35-854-663 344 69.6 98.7 9.4 9E-B38-749-527 84 749.3 984.25 98.6 9E-B32-868-75 7 69.6 98.7 9.4 9E-B38-749-739 84 749.3 98.7 98.6 9E-B32-868-75-7 69.6 98.7 9.4 9E-B35-749-965 87 752.35.7 82.5 9E-B4-867-466 65 69.6 98.7 9.4 9E-B35-749-965-87 752.35.7 82.5 9E-B4-867-466-74 66 86.6 88.9 9E-B3-727-967 48 755 95 52 9E-B6-825-6B4 62.5 66 86.7 88.9 9E-B32-729- 44.5 778 2 8 9E-B4-9-28 22.5 66 86.7 88.9 9E-B32-727-935 5 86.5 8.7 25.4 9E-B45-947-484 28 66 86.7 88.9 9E-B32-727-939 52.5 86.5 5.6 25.5 9E-B45-947-56 37 69.3 86.7 92.2 9E-B32-725-64 33 89.8 55.7.6 9E-B4-975-48 34 628.7 883.9 98.6 9E-B32-737-83 7 89.8 55.7 7.95 9E-B57-976-675 396 634 835.7 55.9 9E-B2-733-895 7.5 82.8 37.9 8 9E-B4-959-997 37 634 838.8 56 9E-B2-744-448 53.5 82.8 37.9 8 9E-B4-959-28 37 634 838.8 56 9E-B2-744-568 7.5 82.8 72.9 4 9E-B32-924-325 248 634 838.8 56 9E-B2-744-568-7.5 828.6 88.64 86.6 9E-B38-94-692 8 634 838.8 56 9E-B2-744-568-2 7.5 828.6 88.64 86.6 9E-B38-94-692-8 4
Single-row d T D Single-row Single-row Boundary Dimensions Designation Weight Boundary Dimensions Designation Weight d D T G d D T G [mm] [kg] [mm] [kg] 834 48 56 9E-B2-944-774 68 4.9 366.5 3 9E-B45-29-737 386 834 48 55 9E-B2-944-567 89 4.9 366.5 3 9E-B45-29-769 384 853.9 88.8 65. 9E-B45-97-67 268 7 4 88.5 9E-B3-25-46 233 853.9 88.8 65. 9E-B45-97-67-268 52.8 8 9E-B7-33-962 87 87 78.6 25.5 9E-B45-9-736 375 22 367.5 85 9E-B22-235-77 234 882.6 4.9 9E-B25-974-88 95 5 4.6 93 9E-B4-265-55 265 882.6 97.3 83.3 9E-B25-974-27 65 65 428.26 4 9E-B35-288-829 248 882.6 78.4 82 9E-B25-974-625 48 28 498.6 89 9E-B32-32-25 298 882.6 78.4 82 9E-B25-974-54 48 23 456 8 9E-B25-33-233 24 889 82.8 82 9E-B25-984-45 47.5 23.2 64 8. 9E-B5-39-728 535 889 83 82 9E-B25-984-572 35 35. 59. 89.9 9E-B3-455-43 25 893 79 9 9E-B2-969-23 5 323.8 752.6 46. 9E-B7-52-384 93 895 78 9E-B25-984-445 4 337 74 2 9E-B45-49-89 564 94.4 49.7 45.7 9E-B3-987-754 53 35 458 95 9E-B6-389-69 45 938.5 34. 2.7 9E-B5-3-76 59.5 374.7 93.3 42.9 9E-B7-597-784 22 955 324 37 9E-B45-5-329-48 383.3 95 7.5 9E-B75-638-87 3 958.9 286.3.6 9E-B45-8-78 337 52 782.33 8 9E-B3-643-826 38 96 26.7 8 9E-B3-72-836 28 524 76. 58.4 9E-B22-632-7 29 96 232 7 9E-B35-95-788 25 54 95 9.9 9E-B5-7-33 376.5 975 235.39 93 9E-B4-9-637 253 546.2 849. 76.2 9E-B4-676-494 46 976 2 65 9E-B25-72-833 35 546.2 849. 76.2 9E-B35-676-63 396 976 2 65 9E-B25-72-833-35 546.2 849.5 27 9E-B35-676-33 558 976 2 9E-B35-77-542 238 6 2.4 38 9E-B5-767- 92 984 9.5 55.88 9E-B2-94-62 77 66 297.6 2 9E-B6-85-7 9 984 2 56 9E-B2-94-44 85 686 234 2 9E-B45-848-94 682 99.6 397 2.7 9E-B6-65-738 535 695.5 26.7 8.85 9E-B75-897-783 575 99.6 397 2.7 9E-B6-65-738-535 729 239.2 9E-B45-9-9 698.8 28.6 89 9E-B4-2-6 3 74 2 73 9E-B25-83-24 35 57.2 39.92 55.45 9E-B57-223-344 553 835 293.26 93 9E-B4-942-638 427 63.8 388.5 3.5 9E-B45-29-468 422 88 293.64 4 9E-B4-23-865 567 68 326.4 9 9E-B3-79-749 22 952 224.8 8 9E-B35-274-9 4 73.2 366.5 3 9E-B45-29-959 352 957 238.8 9 9E-B5-23-892 94 85 48 2 9E-B35-222-78 394 957 238.8 9 9E-B5-23-636 94 95 38 9E-B4-22-478 348 2 2267.4 9 9E-B4-222-45 473 379.8 2 9E-B35-25-64 32 25 2457.6 2 9E-B45-2253-37 822 4
FOUR-POINT CONTACT BALL SLEWING RINGS with external gear special Single-row d T D Single-row Boundary Dimensions Designation Weight d D T G [mm] [kg] 284 2624.4 3 9E-B5-2355-235 26 2255 259.6 93 9E-B45-2363-882 496 2286 252.7 89 9E-B22-2394-877 43 232 263.6 9 9E-B33-2435-7 77 42
Double-row d T D Double-row Boundary Dimensions Designation Weight d D T G [mm] [kg] 26.3 343 84. 9E-2B2-343-8 48 26.3 434 84. 9E-2B6-343-764 48 33 53.8 88 9E-2B22-425-888-H 75 33 53.8 88 9E-2B22-425-24-H2 72 895 77.7 9E-2B25-976-23 65 895 79. 82 9E-2B2-97-2 3 625. 95.7 37.9 9E-2B3-735-988 582 63 22 53 9E-2B32-8-348 24 686 244 65.86 9E-2B4-835-776 945 773 239.7 26 9E-2B25-877-987 5 773 24 26 9E-2B25-876-32 525 89 2226 224 9E-2B5-993-344 56 22 288 29 9E-2B6-25-95 458 43
FOUR-POINT CONTACT BALL SLEWING RINGS with internal gear G a Single-row n2 x N 2 G 2a D D J T H G b B H2 n x N G c G 2c d d 2 J 2 DS Single-row Boundary Dimensions Designation Weight Abutment Dimensions Mounting Holes N Mounting Holes N 2 d D T G J J 2 N N 2 Number n Hole Type Number n 2 Hole Type [mm] [kg] [mm] 638.4 94.4 88.9 9I-B32-788-283 7 863.6 77.6-8 UNC -8 UNC 32 C 4 D 648.2 85 7 9I-B25-763-86 89 82 75 M6 M6 24 E 24 E 65.2 848.4 55.9 9I-B2-74-4 82 82.8 7.8 7.5 /2-3 UNC 5 A 28 D 65.6 94.4 88.9 9I-B32-788-95 76 863.6 77.6 24 7/8-9 UNC 6 A 2 D 656 868 77 9I-B22-783-444 4 834 73 8 M6 8 A 24 E 67.6 933.5 98 9I-B32-83-952 8.5 889 74.4 27-8 UNC 24 A 26 D 67.6 933.5 98 9I-B32-83-95 8 889 74.4 24 7/8-9 UNC 24 A 26 D 67.6 95 98.6 9I-B35-825-77 23.5 899.2 749.3-8 UNC 27 24 C 36 A 67.6 95 98.6 9I-B35-825-77-23.5 899.2 749.3 27-8 UNC 24 A 36 C 736 95 7 9I-B25-86-57 5 92 85 M6 M6 3 E 3 E 736 95 7 9I-B25-86-57-5 92 85 M6 M6 3 E 3 E 757.6 43 4.9 9I-B5-97-66 356 92.2 85.9 3 3 3 A 42 A 77. 54. 6.5 9I-B4-923-73 247 6 85.9 24 7/8-4 UNF 36 A 36 D 772.7 3.3 27 9I-B32-897-85 222 944. 849.9 7/8-9 UNC 7/8-9 UNC 36 D 36 D 786.5 99.6 4.3 9I-B32-897-98 7 944. 849.9 3/4- UNC 3/4- UNC 3 D 3 D 856 66 75 9I-B25-98-52 43 35 926 8 M6 24 A 26 E 86.4.8 9 9I-B3-995-558 94 6 93 M2 M2 24 C 24 D 945.4 2 9I-B29-3-323 24 65 4 2.5 M2x.5 36 A 36 D 954 85 75 9I-B22-9-832 43 45 45 8 M6 4 A 4 D 957. 74.8 8 9I-B32-88-689 23 34. 39.9 3/4- UNC 3/4- UNC 36 D 36 D 957. 68.4 9.4 9I-B4-86-45 2 34. 39.9 3/4- UNC 3/4- UNC 36 D 36 D 957. 68.4 9.4 9I-B4-86-45-22.5 34. 39.9 3/4- UNC 3/4- UNC 36 D 36 D 963 95 85 9I-B3-99-4 79 8 4 9 7 36 A 36 A 986.4 256 2 9I-B3-5-26 274 25 85 22 M2 3 A 3 F 298 9 9I-B35-7-266 282 25 95 26 M2 22 A 3 F 7.9 298.5 9.4 9I-B32-67-54 282 247.8 92.2 27-8 UNC 22 A 2 D 8.3 298 9 9I-B35-7-9 28 25 95 26 M2 22 A 3 F 5 23 66 9I-B2-3-552 25 8 8 M6 8 4 E 4 A 9.2 38. 27 9I-B4-24-34 498 333.5 49.4 26 M24 3 A 3 E 46 399.5 4.3 9I-B45-257-4 456 342.4 7.7 24 24 3 A 36 B 48.5 32.8 28.52 9I-B45-87-352 349 279.5 3.2 23.9 7/8-9 UNC 36 A 4 D 48.5 358.9 4.3 9I-B5-234-327 4 37.6 49.4 7/8-9 UNC 7/8-9 UNC 36 D 36 D 6.7 339.9 2.4 9I-B4-24-97 354 295.4 49.4 27-8 UNC 3 A 3 D 7 35 98 9I-B32-2-392 245 265 56 2 M6 48 A 48 D 75. 3 9I-B3-25-25 24 27 7 2 M2 (36-) A 36 D 44
Mounting holes types A B C Lubrication spots types a b c d e D E F f g h ch i Other Specifications Permissible Lubrication Spots Note No. Notes Circumferential Force D d 2 H H 2 B m (DP) z x F TDov F Tmax Type Size Location Number [mm] [kn] 76.2 82.6 82.6 DP3 77 75 5 a /8-27 NPT Gb Thread in mounting holes has a depth of 3 85 55 6 55 6 9 -.5 38 76 f Mx Gb 2 2 The inner ring piloted on the outer diameter 45.7 45.7 45.7 DP4 4 2 4 f /8-27 NPT Gb 2 3 The outer ring piloted on the inner diameter 76.2 82.6 82.6 DP4/5 4 57 4 a /8-27 NPT Gb 4 Mounting holes on the inner ring are regular 55 68 64 8 82 55 f Mx Gb 4 76.2 88.9 88.9 DP3.5 94 7 42 a /8-27 NPT Gb 76.2 88.9 88.9 DP3.5 94 7 42 a /8-27 NPT Gb 85.85 92.2 92.2 DP3.5 94 7 4 a /8-27 NPT Gb 2 85.85 92.2 92.2 DP3.5 94 7 4 a /8-27 NPT Gb 2 55 6 55 8 94 46 92 f Mx Ga/Gb 2/2 55 6 55 8 94 46 92 f G /8 Ga 2 92.2 98.5 98.5 DP3.5 6 78 56 a /8-27 NPT Gb 2 85.6 88.9 88.9 DP2.5 77 -.4 8 62 f Rp /8 Gb 4.6.6 76.2 DP3.5 8 6 2 a /8-27 NPT Gb 2 82.4 85.9 9.4 5.8 DP3.5 46 92 g /8-27 NPT Gb 4 65 7 65 5 4 26 6 32 a AMx Gb 4 978.6 82 75 7 7 25 42 84 a AMx Gb 3 8 83 82 2 8.666 7 234 f /8-27 NPSF Gb 3 84 48 65 65 9 6 -.4 68 36 f Mx Gb 4 2.9 85.9 95.3 69.9 DP2.5 96 75 5 a /8-27 NPT Gb 4 65.4 46 46 55. DP2.5 96 59 8 g /8-27 NPT Gb 4 65.4 46 46 63.5 DP2.5 96 68 36 g /8-27 NPT Gb 4 72 7 69 98 68 36 a /8-27 NPT Gb 2 255 32 96 85 79 2 84 22 a AMx Gb 5 2, 4 65 8 8 69 2 84 -.5 96 92 a AMx Gb 2 79.25 68.33 65.8 DP2.5 -.4 84 68 a /8-27 NPT Gb 2 65 8 75 64 -.73 74 48 a AMx Gb 2 23 56 54 54 7 48 -.5 38 76 a AMx Gb 4 98.4 7.5.6 4 74 -.4 54 38 f /8-27 NPT Gb 2.6.6.6 4 76 -.357 34 268 g /8-27 NPT Gb 4 9.9 9.3.6 DP2.5 4 -.4 29 258 a /8-27 NPT Gb 2 4.9 2.9 4.3 76.2 DP2.5 5 8 6 g /8-27 NPT Gb 4 336.6 98.552 4.92 76.2 DP2.5 6 67 34 a /8-27 NPT Gb 2 82 9 88 6 -.549 2 24 g Mx Gb 6 8 9 8 2 9 -.669 222 f /8-27 NPT Ga/Gb /2 45
FOUR-POINT CONTACT BALL SLEWING RINGS with internal gear Single-row D Double-row D G a n2 x N 2 D J G a n2 x N 2 D J G 2a G 2a T H G b B H2 H G b T B H2 * G b n x N G c G 2c d d 2 J 2 DS n x N G c G 2c d d 2 J 2 DS Single-row Boundary Dimensions Designation Weight Abutment Dimensions Mounting Holes N Mounting Holes N 2 d D T G J J 2 N N 2 Number n Hole Type Number n 2 Hole Type [mm] [kg] [mm] 78 377 3 9I-B4-252-364 46 33 9 26 M24 34 A 36 D 8 3 9I-B3-25-644 225 27 7 2 M2 (36-) A 36 D 8 3 5.5 9I-B3-22-7 224 275 46 2 M2x.5 36 A 36 D 83 3 5 9I-B3-22-6 223 275 7 2 M2x.5 36 A 36 D 85.3 4 5 9I-B4-278-269 48 36 95 26 26 4 A 4 A 32.8 42 8 9I-B3-28-963 254 358 22 M2 22 24 D 24 B 32.8 42 8 9I-B3-28-9 254 358 22 M2 22 24 D 24 B 4.3 44 2 9I-B25-296-8 33 36 232 22 M2 48 A 48 E 78 53 3 9I-B4-385-86 538 48 29 26 M24 48 A 48 E 84 427 88.9 9I-B25-32-88 266 39 255 22 M2 8 B 8 D 86.2 524 39.7 9I-B45-378-78 536 473.2 282.7-8 UNC 27 36 E 36 A 88 53 3 9I-B4-385-86 57 48 29 32 M3 36 A 48 E 9. 565. 33.4 9I-B5-46-985 599 57.7 34.5 27 27 42 A 42 A 23 63 3 9I-B5-466-994 678 578 36 32 M3x2 36 A 4 D 324.4 725 34 9I-B5-559-297 688 666 452 3 3 (6-) A 6 A 34.7 6 89.9 9I-B3-455-389 3 562. 397 3/4- UNC 3/4- UNC 48 D 48 D 328.9 78.2 2.7 9I-B45-56-4 66 65 47 24 24 36 A 36 B 452 9 3 9I-B5-722-3 93 835 6 32 32 48 A 48 A 6 2 5 9I-B6-83-267 925 94 72 3 3 54 A 54 A 69 225 4 9I-B45-864-859 88 97 76 35 M33 (54-) A 54 E 788 224 37 9I-B6-245-353 72 27 92 33 33 45 A 45 A 846 225 9I-B5-27- 867 28 96 32 32 48 A 48 A 2243 266 26 9I-B45-249-97 225 2595 2385 33 M3 54 A 54 E 2243 266 26 9I-B45-249-97-225 2595 2385 33 M3 72 A 72 E Double-row 786.7 973. 82 9I-2B2-896-29 25.5 944 85 5/8- UNC 5/8- UNC 3 E 3 D 786 973 97 9I-2B2-897-277 5.5 944 85 7.5 7.5 36 A 36 A 978.5 25 9 9I-2B25-39-386 32 2 67 22 M2 36 A 36 E 48.4 75 2 9I-2B3-65-234 574 75 525 25 25 4 B 4 B 764.5 25 2 9I-2B3-995-85 745 27 89 26 26 48 A 48 A 46
Mounting holes types A B C Lubrication spots types a b c d e D E F f g h ch i Other Specifications Permissible Lubrication Spots Note No. Notes Circumferential Force D d 2 H H 2 B m (DP) z x F TDov F Tmax Type Size Location Number [mm] [kn] 377 85. 9.9 4 78 -.5 78 356 f /8-28 BSP Gb 4 Thread in mounting holes has a depth of 3 42 8 9 8 83 66 a /8-27 NPT Gb 3 2 The inner ring piloted on the outer diameter 23.5 7.5 95 94.5 2 92 4 228 h AMx.5 Gb 2 3 3 The outer ring piloted on the inner diameter 75 95 94.5 2 92 4 228 a A R/8 Gb 2 4 Mounting holes on the inner ring are regular 94 6 8 37 -.3 85 7 a AMx Gb 5 283 7 7 5 DP4/5 8 32 64 a /8-27 NPT Gb 6 3 283 7 7 5 DP4/5 8 39 78 a /8-27 NPT Gb 6 3 297 7 3 2.5 5 -.5 9 238 f Mx Gb 6 2 7 7 2 25 25 g Mx Gb 4 425 32 8 8 7. 8 5 47 94 h AMx Gb 6 2 52 4.3 4.3 82.6 2.7 95 22 a /8-27 NPT Gb 2 7 7 9 2 -.3 92 84 f Mx Gb 4 4.3 8 8 DP.75 83 -.375 76 352 a /8-27 NPT Gb 4 625 35.6 2 5 6 78 -.3 98 396 a AMx Gb 4 25 25 4 96 -.3 84 368 a AMx Gb 5 7. 7. 7. DP2.5 3 73 46 a /8-27 NPT Gb 6.8 8 95.3 4 96 -.459 22 244 a /8-27 NPT Gb 4 9 3 4 4 2 22 -.5 32 264 a AMx Gb 6 2 665 25 25 2 35 -.5 39 278 g Mx Gb 6 8 8 5 6-224 448 f Mx Gb 6 24 9 9 2 5 -.3 44 288 a AMx Gb 5 2 55 -.3 2 24 h AMx Gb 6 5 7 7 6 4 -.5 27 434 f Mx Gb 9 5 7 7 6 4 -.5 27 434 f Mx Gb 9 78 7 5 DP3.5 35 7 a /8-27 NPT Gb/Gb* 2/2 88 88 88 8 99 -.5 8 62 a AM8x Gb/Gb* 2/2 25 96 9.5 99 -.35 96 92 f Mx Gb/Gb* 4/4.5.5 98.5 2 2 22 a /8-27 NPT Gb/Gb* 5/5 972 4 99 4 27 -.5 34 268 g Mx Gb/Gb* 4/4 2 47
FOUR-POINT CONTACT BALL SLEWING RINGS with internal gear special Single-row d T D Single-row Single-row Boundary Dimensions Designation Weight Boundary Dimensions Designation Weight d D T G d D T G [mm] [kg] [mm] [kg] 26 34 39 9I-B6-288-98 3 585 8 85 9I-B25-72-9 8 26 34 42 9I-B6-288-35 3 593.8 85 8 9I-B32-74-74 36 258.95 48 5 9I-B2-342-35-25 6 66 58 9I-B-63-333 2.5 258.95 48 5 9I-B2-342-35-2 25 648 85 7 9I-B25-763-58 85 292 457 48 9I-B2-388-34-3.5 648 85 7 9I-B25-763-58-85 35.5 52.5 54 9I-B25-422-3 49 65.2 848 56 9I-B2-74-279JUA 54.8 39.5 458 37 9I-B6-4-393 7 65.2 848 56 9I-B2-74-279 54.8 39.5 458 37 9I-B6-4-724 8 65.2 848. 55.9 9I-B2-756-3 72.5 32 458 37 9I-B6-4-6 7.5 65.2 848. 55.9 9I-B2-756-848 72 323.8 52.3 54 9I-B25-422-283-2 46 65.2 848. 55.9 9I-B2-748-28 53.5 323.8 52.3 54 9I-B25-422-283-46 65.2 853.9 55.9 9I-B22-762-3 76.5 323.8 52.3 54 9I-B25-422-283-3 46 65.6 94.4 88.9 9I-B32-788-95 76.5 323.8 52.3 54 9I-B25-422-66 46 669.3 857.3 88.9 9I-B25-762-35 2 323.9 52.7 55.6 9I-B25-42-893-46.5 67 856.99 88.9 9I-B25-762-39 2 323.9 52.7 55.6 9I-B25-42-893-2 46.5 67 857 88.9 9I-B25-762-39-2 323.9 52.7 55.6 9I-B25-422-22 48.5 67.6 933.5.6 9I-B32-83-953 78 332 486 39 9I-B6-42-99 23 694.9 35. 4.3 9I-B45-887-957 292 379 535 5 9I-B2-465-725 33 79 9 8 9I-B25-782-679 2 379 535 5 9I-B2-465-59 33 736 95 7 9I-B25-86-57-2 5 379 535 5 9I-B2-465-33-34 74 95 58.7 9I-B25-848-934 98.5 38 535 5 9I-B2-465-33 34 74 8 9I-B32-92-2 77 38 545 55 9I-B2-465-36-37 745.7 99.6.6 9I-B32-883-944 87.5 428 66.4 69.85 9I-B25-559-847 8 762 934 8 9I-B22-862-8 24 445 648 56 9I-B2-54-59 39 782.3.3 88.9 9I-B25-889-66 5.5 445.5 645 6 9I-B25-55-743 57.5 785 98 68 9I-B2-892-58 98 462 65 65 9I-B25-57-22 62 785 98 68 9I-B2-892-58 98 472 64 55 9I-B22-566-726 44 786.7 99.6 4.3 9I-B35-895-45 68 48 64 55 9I-B22-566-726-44 786.7 99.6 4.3 9I-B35-897-633 65 492.3 69 7 9I-B25-64-39 7 79 4.7 65. 9I-B32-924-52 35 56.9 789 2.7 9I-B4-665-795 224 79 4.7 65. 9I-B32-924-52-35 542.3 73.3 88.9 9I-B25-635-76 82 45 92 9I-B3-5-375 87 546 748 56 9I-B2-64-629 46 84 48 56 9I-B2-94-65 69 548.6 73.5 5.5 9I-B25-657-562 53 84 65 56 9I-B2-95-748 6.5 548.8 724 45 9I-B2-658-32 46.5 84.6 48 56 9I-B2-94-388 68 56 825 9 9I-B36-75-254 39 843 48 55.9 9I-B2-956- 93 48
Single-row d T D Single-row Single-row Boundary Dimensions Designation Weight Boundary Dimensions Designation Weight d D T G d D T G [mm] [kg] [mm] [kg] 854 66 2 9I-B25-978-27 77.5 27 328 2 9I-B35-94-837 389 856.3 84 89 9I-B3-99-296 52 38 45.9 4.6 9I-B4-25-358 43 864 84 73 9I-B3-99-69 33 38 45.9 4.6 9I-B4-25-358-43 88.5 6 75 9I-B25-4-25 55 48.5 32.8 28.5 9I-B45-87-352-349 88.5 6 75 9I-B25-4-32 55 48.5 32.8 28.5 9I-B45-87-367 349 88.5 6 75 9I-B25-4-32-55 48.5 32.8 28.6 9I-B45-87-222 37.5 9 96 58 9I-B-93-32 28 48.5 358.9 4.3 9I-B5-234-327-43.5 92 45 92 9I-B3-5-275 59 48.5 38.3 27 9I-B45-24-56 448 92 45 92 9I-B3-5-334 8 48.5 38.3 27 9I-B45-24-464 465 924 225.5 25 9I-B4-86-296 372 48.5 38.3 27 9I-B45-24-464-45.5 924.6 226.3.6 9I-B4-94-936 292.5 54. 3.8 3. 9I-B25-2-76 263 924.6 225.5 9I-B35-96-93 293 66.8 398 2 9I-B5-22-745 474 935 22 3 9I-B4-8-623 296 7 35 98 9I-B3-2-4 264 939.6 25 5 9I-B35-85-672-267 7 35 98 9I-B32-2-4-245 944 59 79 9I-B25-65-34 5 83 322. 99.6 9I-B3-22-64 248 945.4 2 8 9I-B29-3-827 24 83 322. 99.6 9I-B3-22-64-248 945.4 2 9I-B29-3-323-24 83 327 9I-B32-22-546 246 945.4 2 9I-B29-3-323-2 24 83 526 2.9 9I-B35-45-687 698 95. 25 84 9I-B35-4-294 269 83.6 3 9I-B29-23-324 243 955 77 9 9I-B3-7-372 8 92 36 25 9I-B32-243-369 325 957. 63.3 89.9 9I-B32-87-353 73 92 379 22.5 9I-B4-249-782 397 957. 63.5 9I-B32-87-43 88 92.2 4 9 9I-B4-278-292 327 957. 68.4 9I-B32-87-42 9 92.2 4 92 9I-B4-278-323 332 959. 2.2 9I-B25-96-27 25 37.9 456 23.2 9I-B5-289-647 57 96.2 25 95 9I-B3-94-34 224 4 44 99 9I-B25-296-4 272 963 2 9 9I-B3--4 26 4 44 99 9I-B25-296-222 28 967.2 222.3 27 9I-B4-9-339 35 5. 54.4 26.3 9I-B6-336-352 67 967.2 222.2 77.8 9I-B4-92-9 292 64 55 35 9I-B45-362-63 545 97.6 72 85.34 9I-B22-86-459 45 64.2 495 9I-B4-35-483 428 984 66 56 9I-B2-98-33 87 64.2 495 9I-B4-35-483-428 298 9 9I-B35-7-266-282 76 46 2 9I-B35-34-889 39 7.8 298 9 9I-B35-7-36 275 82 464.6 35. 9I-B35-344-368 38 8.3 298 9 9I-B35-7-9-28 22 489 9.9 9I-B3-375-72 378 9.9 298.5.6 9I-B32-67-382 38 22 6 5 9I-B4-446-2 594 298.7 8.4 9I-B4-65-495 328 28 6 2 9I-B45-448-293 532 49
FOUR-POINT CONTACT BALL SLEWING RINGS with internal gear special Single-row d T D Single-row Boundary Dimensions Designation Weight d D T G [mm] [kg] 22 62 5 9I-B6-44-62 78 225 46 2 9I-B38-34-325 42 23.2 592. 2 9I-B57-4-697 73 235 532 25 9I-B4-45-685 429 235.2 526 2.9 9I-B35-45-686 445 238 563 5.9 9I-B5-45-688 68 239.9 62.6 33.4 9I-B5-47-23 653 25.5 592. 2 9I-B5-49-648 582 262 549.4 45 9I-B4-42-365 465 262 575.6 5 9I-B4-42-835 522 358.4 648 29.8 9I-B45-55-878 529 364 77 2 9I-B5-594-263 72 473.2 797. 23.8 9I-B32-676-8 569 473.2 797. 23.8 9I-B32-676-8-569 496.9 797. 24 9I-B35-676-855 53 68 2 88.9 9I-B35-877-36 498.5 837 233 45 9I-B6-238-8 294 998. 2324. 39.7 9I-B4-284-9 8 264 25 45 9I-B5-232-8 34 264 25 44 9I-B5-232-8-34 264 25 44 9I-B5-232-8-2 29 264 25 45 9I-B5-232-8-3 34 2358 268 8 9I-B45-255-93 822 275 325 72 9I-B6-3-245 2476 275 325 72 9I-B6-3-326 2476 5
Double-row d T D Double-row Boundary Dimensions Designation Weight d D T G [mm] [kg] 89 54 3 9I-2B35-385-278 59 47 87 22 9I-2B32-7-995 785 625. 95.7 37.9 9E-2B3-735-988 582 63 22 53 9E-2B32-8-348 24 657.3 28 42 9I-2B35-9-232 75 686 244 65.86 9E-2B4-835-776 945 784.5 25 35 9I-2B5-232-33-3kr* 94 247 258 82 9I-2B45-24-327 75 36 345 56 9I-2B4-33-69 22 Note: * Double-row three-ring slewing bearing 5
CROSSED ROLLER SLEWING RINGS without gear Single-row n x N G a n2 x N2 G 2a D J d d S 2 2 T H G b G 2b 2 H G 2c G c J D D Single-row Boundary Dimensions Designation Weight Abutment Dimensions Mounting Holes N Mounting Holes N 2 d D T G J J 2 N N 2 Number n Hole Type Number n 2 Hole Type [mm] [kg] [mm] 8 2 26 9O-Z8-68-864 4.5 92.5 33 M8 9 2 C 2 B 24.5 234 35 9O-Z2-79-858 7 24 44.5 2 A 2 A 3 25 25.4 9O-Z8-68-78 4.5 9 45 6.8 6.8 2 B 2 B 3 3 65 9O-Z2-22-84 24.5 278 62 7 7 A A 36 25 4 9O-Z4-93-52 8.2 23 56 2 A 2 A 36 25 4 9O-Z4-93-52-8.2 23 56 M M 2 C 2 C 36 25 4 9O-Z4-93-52-2 8.5 229.5 56 9 M8 2 B 2 C 4 3 36 9O-Z2-222-44-4 2 27 7 8 8 6 A 6 A 4 3 39 9O-Z4-222-26-2.5 27 7 M6 M6 2 C 2 C 4 299 36 9O-Z2-222-69 27 7 M6 8 2 C 2 A 8 332 42 9O-Z4-254-68-4 3 2 3 3 24 A (24-) A 2 34 3 9O-Z-25-76-2 7.5 288 26 M 9 A 9 C 2 34 3 9O-Z-25-76-3 7.5 288 26 M M 9 C 9 C 25.5 335 3 9O-Z2-275-8 2 35 23 M 8 B 8 C 22 37 64 9O-Z2-295-5 26 345 245 2 A 2 A 22 37 64 9O-Z2-295-595 25 345 245 M2 3 6 D (2-) A 23 4 68 9O-Z25-35-487 32 375 255 5 5 (24-) A 24 A 23 4 68 9O-Z25-35-487-32 375 255 M4 5 (24-) D 24 A 24 36 36 9O-Z4-3-378 2.5 36 26 8.4 8.4 2 A 2 A 25 34 29 9O-Z-295-972 7.5 325 265 9 9 8 A 8 A 25 366 4 9O-Z4-35-28 4 345 27 2 B 2 A 295 455 85 9O-Z25-384-544 47 425 323 M2 M6 6 D 6 E 3 5 8 9O-Z3-4-488 6 47 33 7 7 (24-) A 24 A 3 5 8 9O-Z3-4-488-6 47 33 M6 7 (24-) C 24 A 34 55 9 9O-Z3-46-26 83 55 38 M2 22 2 D (22-) A 34 58 86 9O-Z3-46-25 9 54 38 22 M2 2 A (22-) E 34 58 86 9O-Z3-46-278 9 54 38 22 22 2 A (22-) A 435 698.5 85 9O-Z3-56-432-27 644.5 473 2.5 24 8 B 24 A 465 725 9O-Z4-595-48 46 685 55 22 22 (3-) A 3 A 64 868 97 9O-Z3-766-38 63 838 684 M2 M2 3 D 3 E 75 935 9 9O-Z3-82-35 6.5 895 745 22 22 3 A 3 A 75 935 9O-Z3-823-5-66 893 753 22 22 8 A 8 A 726 94 75 9O-Z25-839-799 26 96 756 8 8 32 A 32 A 868 95 9O-Z3-98-6-8 2 5 9 7 7 8 A 8 A 87 9 79 9O-Z25-98-92 67 5 9 22 22 44 A 44 A 52
Mounting holes types A B C Lubrication spots types a b c d e D E F f g h ch i Other Specifications Lubrication Spots Note No. Notes D d 2 H H 2 Type Size Location Number [mm] 2 8 24.8 24.8 a AM8x Gb 4 Lubricant fi lling for the total lifetime 232 26.5 3 3 h AM8x Gb 2 The outer ring piloted on the inner diameter 25 3 24.8 24.8 3 Lubricating holes on the pitch circle dia. 232 mm 3 3 57 57 f Mx Gb 2 35 35 f M8x Ga 2 35 35 f M8x Ga 2 35 35 f M8x Ga 2 298 42 3 3 f Mx Gb 3 4 33 33 a AM8x Gb 4 299 4 3 3 a AM8x Gb 2 332 8 35 35 f Mx Gb 2 27 24 2 27 24 h AM8x Gb 2 3 3 e /8-27 NPT G2a 37 22 55 55 f Mx Gb 2 37 22 55 55 f Mx Gb 4 4 23 58 58 f Mx Gb 2 4 23 58 58 f Mx Gb 4 358 242 3 3 f M8x G2c 25 24 24 365 25 35 35 f M8x Gb 2 455 295 75 7 f Mx G2b 2 5 3 7 7 f Mx Gb 2 5 3 7 7 f Mx Gb 2 47 34 8 72 f Mx Gb 4 2 58 34 76 76 f Mx G2a 2 58 34 76 76 f Mx Gb 2 435 76 76 f /8-27 NPT Gb/G2b 6/6 725 465 9 9 f Mx Gb 3 868 64 82 87 f Mx Gb 2 935 75 8 8 a AMx Gb 3 845 78 83 84 f M8x Ga 4 2 726 65 65 a Mx Gb 4 993 87 83 86 f Mx Gb 3 2 9 87 72 72 a Mx Gb 4 53
CROSSED ROLLER SLEWING RINGS without gear Single-row n x N G a n2 x N2 G 2a D J d d S 2 2 T H G b G 2b 2 H G 2c G c J D D Single-row Boundary Dimensions Designation Weight Abutment Dimensions Mounting Holes N Mounting Holes N 2 d D T G J J 2 N N 2 Number n Hole Type Number n 2 Hole Type [mm] [kg] [mm] 89 2245 4 9O-Z5-27-35 96 29 95 32 32 45 A 45 A 945 236 67 9O-Z2-245-757 253 2 985 4 8 36 A 36 A 295 242 35 9O-Z4-2248-55 2 2365 24 33 26 32 A 48 A 295 242 35 9O-Z4-2248-55-2 2365 24 33 26 32 A 48 A 54
Mounting holes types A B C Lubrication spots types a b c d e D E F f g h ch i Other Specifications Lubrication Spots Note No. Notes D d 2 H H 2 Type Size Location Number [mm] 224 896 25 25 f Mx Gb 5 Lubricant fi lling for the total lifetime 235 946 57 57 f Mx Gb 6 2 The outer ring piloted on the inner diameter 2 25 2 f Mx Ga 4 3 3 Lubricating holes on the pitch circle dia. 232 mm 242 2 25 2 f G 3/8 G2a 4 55
CROSSED ROLLER SLEWING RINGS without gear special Single-row d T D Single-row Single-row Boundary Dimensions Designation Weight Boundary Dimensions Designation Weight d D T G d D T G [mm] [kg] [mm] [kg] 6 24 37 9O-Z-47-376.5 24 32 35 9O-Z4-28-38 8.6 33 65 9O-Z2-262-978 27.5 25 3 25 9O-Z-28-423 5 395 65 9O-Z2-38-92 39 25 34 29 9O-Z-295-972- 7.5 8 2 26 9O-Z8-68-864-4.5 25 36 4 9O-Z4-35-73 3 2 26 58 9O-Z6-95-385 4.5 25 365 37 9O-Z4-35-5 4.4 2 26 58 9O-Z6-95-46 4.5 25 43 64 9O-Z2-344-75 36 24 234 35 9O-Z2-79-98 7 255 39 42 9O-Z8-3-97 8.5 3 25 4 9O-Z4-93-54 8.2 28 389 55 9O-Z22-337-46 23 3 25 4 9O-Z4-93-54-8 28 56 75 9O-Z2-46-66 66 3 25 4 9O-Z4-93-54-3 8.2 3 455 85 9O-Z25-384-246 43 3 3 65 9O-Z2-22-84-24.5 3 46 6 9O-Z4-384-86 34.3 4 3 36 9O-Z2-22-532 2 3 46 85 9O-Z25-384-8 45 4 3 36 9O-Z2-22-532-2 3 46 85 9O-Z25-384-2 45 4 3 36 9O-Z2-222-44-2 3 46 85 9O-Z25-384-43 S 47 4 3 36 9O-Z2-222-44-2 2 3 5 6 9O-Z4-384-86-39.4 4 3 36 9O-Z2-222-44-3 2 33 4 35 9O-Z8-368-8 2.5 4 3 36 9O-Z2-222-44-5 2 335 475 45 9O-Z4-45-37 24 4 3 36 9O-Z2-25-693 2 335 475 45 9O-Z4-45-55 27 4 3 36 9O-Z2-25-693-2 34 55 9 9O-Z3-46-28 75 4 299 36 9O-Z2-222-233 34 55 9 9O-Z3-46-28-75 6 266 3 9O-Z-26-77 6.3 34 55 9 9O-Z3-46-28-2 75 6 29 4 9O-Z6-225-634 3 34 55 9 9O-Z3-46-82 S 77.5 7 29 28 9O-Z-225-247 6 34 58 86 9O-Z3-46-86 89 8 332 42 9O-Z4-254-68 4 344 484 56 9O-Z4-44-575 28 2 295 3 9O-Z-225-456 5.3 345 478 42 9O-Z4-45-47 8 2 34 3 9O-Z-25-76 7.6 345 478 42 9O-Z4-45-48 8 2 34 3 9O-Z-25-76- 7.6 36 44 4 9O-Z2-4-777 4 2 34 3 9O-Z-25-76-4 7.5 39 48 45 9O-Z25-435-722 2 2 34 3 9O-Z-25-76-5 7.5 43 642 56 9O-Z2-548-927 6 2 34 3 9O-Z-25-76-6 7.5 435 698.5 85 9O-Z3-56-432 27 22 352 4 9O-2Z2-282-29 7.5 448.5 645 9.5 9O-Z45-55-363 95 24 356.5 56 9O-Z6-283-59 24.5 46 6 45 9O-Z4-53-54 36.2 234 43.5 55 9O-Z2-38-298 28 47 626 5 9O-Z6-548-338 39 234 43.5 55 9O-Z2-38-298-28 57 786 9.5 9O-Z3-678-37 2 235 379 55 9O-Z6-3-976 24.5 596.9 787.4 76.2 9O-Z4-78-82 4 56
Double-row d T D Single-row Double-row Boundary Dimensions Designation Weight Boundary Dimensions Designation Weight d D T G d D T G [mm] [kg] [mm] [kg] 64 868 97 9O-Z3-766-38-69 34 46 25 9O-2Z25-4-43 6.5 75 935 9O-Z3-823-3 79 77 979 9O-Z3-823-242 2 72 3 9O-Z4-86-44 286 734 844 4 9O-Z-787-262 38 742 832 4 9O-Z-787-99 34 76 95 56 9O-Z4-839-23 53.3 868 95 9O-Z3-98-6-3 28 87 95 85 9O-Z3-98-872 95 2 56 9O-Z4-89-3 84.8 45 8 5 9O-Z4-62-425 89 554 22 4 9O-Z36-8-34 8 6 225 3 9O-Z4-85-6 998 623 879.6 28 9O-Z36-753-42 544 644 866 75 9O-Z25-747-42 278 89 2245 4 9O-Z5-27-35-96 57
CROSSED ROLLER SLEWING RINGS with external gear Single-row n x N G a n2 x N2 G 2a D J d d S 2 2 T H B G 2b H2 G c G 2c J D D Single-row Boundary Dimensions Designation Weight Abutment Dimensions Mounting Holes N Mounting Holes N 2 d D T G J J 2 N N 2 Number n Hole Type Number n 2 Hole Type [mm] [kg] [mm] 4 3 36 9E-Z2-25-694 258 7 M6 8 2 C 2 A 8 342 42 9E-Z4-254- 4.5 3 2 3 M2 24 A (24-3) C 8 342 42 9E-Z4-254-862 4.5 3 2 3 M2 24 A (24-3) C 234 43.5 55 9E-Z2-39-765 23 358 259 3 3 24 A (28-) A 234 43.5 55 9E-Z6-3--3 27 358 259 M2 M2 24 C 2 C 235 43.5 55 9E-Z6-3-57 24 358 259 3 3 24 A (28-) A 3 46 85 9E-Z25-384-8-45 43 323 M6 3 6 D (2-) A 34 579.8 9 9E-Z3-46-9 86 55 38 M2 22 2 D (22-) A 34 579.8 9 9E-Z3-46-26 86 55 38 M2 M2 2 D (22-) D 344 53.3 56 9E-Z4-44-635 27 455 368 M2 4 2 D 24 A 38 589.5 75 9E-Z2-474- 67 54 4 M6 7 8 D 8 A 39 664 85 9E-Z3-55-597 2 578 432 22 M2 3 A (3-) E 39 654 85 9E-Z3-58-236 98 582 432 22 22 3 A (3-) A 468 695 78 9E-Z25-576-322 88.5 64 58 8 8 36 A (36-) A 47 78 83 9E-Z25-575-44 93 64 58 7 7 36 A (36-) A 573 86 9 9E-Z25-675-45 2 753 64 22 22 8 A 8 A 573 838 9 9E-Z25-675-45 32 753 64 22 22 36 A (36-) A 634 846 75 9E-Z2-73-98 2 795 667 M6 M6 8 D 8 D 634 846 75 9E-Z2-73- 2 795 667 M6 7 8 D 8 A 75 979 9E-Z3-823-5 8 893 753 22 22 8 A 8 A 75 979 9E-Z3-823-5-2 83 893 753 22 22 8 A 8 A 75 979 9E-Z3-823-37 77 893 753 22 22 8 A 8 A 75 979 9E-Z3-823-8 72 893 753 22 22 36 A (36-) A 75 979 9E-Z3-823-25 76 893 753 22 M2 36 A 36 E 868 44 9E-Z3-98-6 23 5 9 22 22 8 A 8 A 89 8 82 9E-Z25-984-452 25 922 M6 M6 3 D 36 E 89 89 9 9E-Z25-98-294 4 5 922 M6 8 3 D 3 A 985 27 5 9E-Z3--7 3 85 34 22 22 36 A 36 A 84 476 9E-Z4-25-263 475 35 5 26 26 24 A 28 A 26 64 3 9E-Z45-39-84 635 5 28 3 3 48 A (48-) A 33 59.7 5 9E-Z25-468-25 377 52 4 M2 M2 4 D 4 E 362 59 9E-Z3-473-78 284 5 398 M22 M22 4 D 4 E 43 88 4 9E-Z4-584-26 772 67 485 M27 33 3 D 3 A 43 88 4 9E-Z4-584-26-3 772 67 485 M27 33 3 D 3 A 53 967.9 3 9E-Z5-722-238 92 85 59 32 32 48 A 48 A 58
Mounting holes types A B C Lubrication spots types a b c d e D E F f g h ch i Other Specifications Permissible Lubrication Spots Note No. Notes Circumferential Force D d 2 H H 2 B m (DP) z x F TDov F Tmax Type Size Location Number [mm] [kn] 3 3 3 4 73 9 8 a AMx G2b The outer ring piloted on the inner diameter 258.5 8 35 35 3 3 2 6 2 f Mx G2a 2 258.5 8 35 35 3 3 2 8 6 f Mx G2a 2 32 235 47 47 39 4.5 88 3 26 f Mx G2b 2 32 235 47 47 39 4.5 88 6 32 f Mx G2a 2 32 235 46 45 4 4.5 88 4 28 g Mx Ga 2 45 3 75 7 6 5 93 22 44 f Mx G2a 2 47 34 8 72 62 5 4 6 32 f Mx G2a 2 47 34 8 72 62 5 4 6 32 f Mx G2a 2 344 44.5 44.5 44.5 5 99 2 a AM8x G2b 4 565 384 6 58 4 4.5 29 9 8 f M8x G2a 2 55 392 72 73 7 64 +.25 63 26 f Mx G2b 3 6 392 73 73 6 8 8 44 88 f Mx G2b 3 47 68 69 42 5 37 6.5 33 a AMx G2b 3 578 47 7 7 7 69 63 26 a AMx G2b 3 682 574 73 7 65 6 32 +.92 29 58 a Mx Ga/G2b 4/3 682 574 73 7 73 8 +.5 85 7 a AMx G2b 2 822 64 6 58 55 4.5 86 2 4 f M8x G2a 2 822 64 6 58 4 4.5 86 4 28 f M8 G2a 2 845 78 83 84 63 94 +. 73 46 f M8x Ga 4 845 78 83 84 7 94 +. 53 6 f Mx Ga 4 825 83 84 83 8 2 34 68 f M8x Ga 4 845 78 83 84 63 94 +. 69 38 f Mx Ga 4 933 78 83 84 67 94 +. 77 54 ch Mx Ga/G2b 4/4 993 87 83 86 66 +.7 76 52 f Mx Ga 4 895 7 67 62 8 33 45 9 f Mx G2b 4 983 89 75 67 75 9 9 65 3 f Mx G2b 3 4 988 86 6 8 25 67 34 f Mx Ga/G2b 6/6 45 85 9 77 44 +.86 89 78 f Mx G2b 4 394 28 2 6 85 57 +.75 86 72 f Mx G2b 4 464 33 3 88 9 9 75 78 56 f Rp /4 G2b 8 362 95 84 6 57 57 4 f M8x G2b 4 68 437 25 8 25 6 4 28 f Mx Ga/G2b 4/2 68 437 25 8 25 6 25 25 f Mx Ga/G2b 4/2 2 2 2 62 26 252 g Mx Ga 4 59
CROSSED ROLLER SLEWING RINGS with external gear Single-row n x N G a n2 x N2 G 2a D J d d S 2 2 T H B G 2b H2 G c G 2c J D D Single-row Boundary Dimensions Designation Weight Abutment Dimensions Mounting Holes N Mounting Holes N 2 d D T G J J 2 N N 2 Number n Hole Type Number n 2 Hole Type [mm] [kg] [mm] 65 227 5 9E-Z5-79-232 97 95 675 3 3 36 A 36 A 65 227 5. 9E-Z45-79-76 9 95 675 3 3 36 A 36 A 68 228 2 9E-Z3-83-297 63 95 745 3 3 48 A 48 A 72 274 23 9E-Z36-87-29 752 96 78 M27 3 36 E 36 A 6
Mounting holes types A B C Lubrication spots types a b c d e D E F f g h ch i Other Specifications Permissible Lubrication Spots Note No. Notes Circumferential Force D d 2 H H 2 B m (DP) z x F TDov F Tmax Type Size Location Number [mm] [kn] 67 88 3 28 2 4 42 +.5 85 37 f Mx Ga/G2b 6/6 The outer ring piloted on the inner diameter 67 88 3 28 2 4 42 +.5 62 324 f /8-27 NPT Ga 4 9 9 2 +.4 68 36 f Mx G2b 6 22 72 2 7 +.5 39 278 a AMx G2b 2 6
CROSSED ROLLER SLEWING RINGS with external gear special Single-row d T D Single-row Single-row Boundary Dimensions Designation Weight Boundary Dimensions Designation Weight d D T G d D T G [mm] [kg] [mm] [kg].6 29. 3.8 9E-Z-52-524 5.3 868 44 99.2 9E-Z3-98-6-4 P4 224.6 27. 3.8 9E-Z-52-37 8 868 44 9E-Z3-98-6-7 229 4 3 36 9E-Z2-25-694-868 44 9E-Z3-98-224 22 4 348 39 9E-Z4-222-439 8 868 44 9E-Z3-98-276 245 8 34 42 9E-Z4-254-333 4 868 44 9E-Z3-98-359 245 8 342 42 9E-Z4-254-- 5.5 869 44 9E-Z3-98-458 28 9 323.4 34 9E-Z-25-673 88 4 9 9E-Z3-98-4 2 234 43.5 55 9E-Z2-39-682 23 88 22 2 9E-Z3-35-2 36 234 43.5 55 9E-Z2-39-822 23 88 22 2 9E-Z3-35-2-36 234 43.5 55 9E-Z6-3-336 26 88 22 2 9E-Z3-35-2-2 36 235 45 55 9E-Z6-3- 23 94.9 98.9 9.4 9E-Z3-29-645 284 235 45 55 9E-Z6-3-- 23 97 344 2 9E-Z4-25-47 467 235 45.3 6 9E-Z2-39-628 3 984 289.5 4 9E-Z36-6-237 326 274 462 59 9E-Z2-354-6 36 984 289.5 4 9E-Z36-6-26 326 295 53.3 9 9E-Z25-384-63 57.8 28.2 89 9E-Z3-2-22 268 48 586.4 75 9E-Z2-498-227 6.8 286.7 27 9E-Z4-2-46 4 58 848 2 9E-Z3-668-33 232 4 29.3 3 9E-Z4-24-436 385 58 848 2 9E-Z3-668-33-232 84 45 9 9E-Z4-25-34 492 57 87 9E-Z3-68-74 63.5 84 476 9E-Z4-25-828 475 573 86 9 9E-Z25-675-45-2 23.5 64 28 9E-Z5-39-258 624 634 846 6 9E-Z2-73-93 2.5 26 64 3 9E-Z5-39-23 635 635 849.7 65 9E-Z2-73-83 95 2 757.3 3 9E-Z4-448-559 57 64 9 97 9E-Z3-766-22 8 27 62 35 9E-Z3-42-22-692 64 9 97 9E-Z3-766-22-8 27 62 35 9E-Z3-42-22 692 64 99 9 9E-Z3-766-24 64 27 62 35 9E-Z3-42-2 692 69 938 76 9E-Z2-842-63 2 362 59 9E-Z3-473-78-285 75 979 9E-Z3-823-5-3 8 362 59 9E-Z3-473-78-2 284 75 979 9E-Z3-823-66 98 43 88 4 9E-Z4-584-8 77 78 979 9E-Z3-823-277 85 43 8 4 9E-Z4-584-26-768 78 979 9E-Z3-823-24 77 43 88 4 9E-Z4-584-37 772 736 944 56 9E-Z6-844-87 84 46 722 97 9E-Z3-584-658 373 868 43 9E-Z3-98-42 243 596 267.3 4 9E-Z4-869-26 665 868 44 9E-Z3-98-6-23 686 234 2 9E-Z4-848-328 7 868 44 99.2 9E-Z3-98-6- P4 23 69 98 92 9E-Z3-858-73 55 868 44 9E-Z3-98-6-4 225 86 28 92 9E-Z3-973-729 355 62
Double-row d T D Single-row Double-row Boundary Dimensions Designation Weight Boundary Dimensions Designation Weight d D T G d D T G [mm] [kg] [mm] [kg] 232 263.6 9 9E-Z36-2435-349 7 57 878.4 87.5 9E-2Z25-677-88 33 232 263.6 9 9E-Z3-2435-349-72 63
CROSSED ROLLER SLEWING RINGS with internal gear Single-row G a n2 x N 2 G 2a D D J T H G b B H2 n x N G c G 2c d d 2 J 2 DS Single-row Boundary Dimensions Designation Weight Abutment Dimensions Mounting Holes N Mounting Holes N 2 d D T G J J 2 N N 2 Number n Hole Type Number n 2 Hole Type [mm] [kg] [mm] 26 34 38 9I-Z2-288-99 2 324 252 9 9 2 A 2 A 325.5 486 56 9I-Z6-45-96 32 46 375 M2 3 24 D 24 A 325.5 486 56 9I-Z6-45-96-32 46 375 3 3 24 A 24 A 332.8 486 56 9I-Z6-45-5 3 46 375 M2 3 24 D 24 A 385 562 6 9I-Z8-489-337 45 538 44 3 3 3 A 3 A 54 722 54 9I-Z8-635-42 67 69 58 8 8 24 A 24 A 644 82 54 9I-Z2-742-335 62 792 692 M2 M2 2 D 2 D 744 988 73 9I-Z25-886-538 44 952 82 8 M6 3 A 3 D 77. 54. 6.5 9I-Z3-923-534 247 6 85.9 2.5 3/4 6-UNF 36 A 36 D 824 7 2 9I-Z3-35-74 363 2 94 26 M3 24 A 6 D 94 2 9I-Z3-9-5 247 6 4 8 M2 36 A 36 D 94 9 9I-Z3-9-756 236 6 4 8 M2 36 A 36 D 954 75 9 9I-Z25-75-654 7 34 4 8 M6 36 A 36 D 96 3 5 9I-Z4-5-23 374 25 55 26 M24 36 A 36 D 963 365 7 9I-Z4-75-3 692 35 8 27 M24 3 A 3 D 3.5 427 95 9I-Z3-35-46 346 39 22 2 2 36 A 36 B 65.5 53 3 9I-Z4-385-75 56 48 29 26 M24 36 A 36 E 77 53 3 9I-Z4-385-3 555 48 29 26 M24 36 A 36 E 78 53 3 9I-Z4-385-639 54 48 29 26 M24 48 A 48 E 224 52 9 9I-Z3-38-53 35 468 332 27 M24 24 A 24 D 44.9 795 4 9I-Z4-632-94 87 74 55 27 M24 36 A 36 D 292 265 9 9I-Z6-2435-22 2267 258 229 39 39 48 A 48 A 226.3 265 23 9I-Z6-2435-28 2363 258 229 4 4 48 A 48 A 64
Mounting holes types A B C Lubrication spots types a b c d e D E F f g h ch i Other Specifications Permissible Lubrication Spots Note No. Notes Circumferential Force D d 2 H H 2 B m (DP) z x F TDov F Tmax Type Size Location Number [mm] [kn] 338 285 33 34 34 4 56 2 24 h AM6x Gb 2 The outer ring piloted on the inner diameter 484 42 44 48 48 5 67 2 4 g M8x Gb 2 2 The inner ring piloted on the opposite face 484 42 44 48 48 5 67 2 4 g M8x Gb 2 484 42 44 48 48 4 85 6 32 g M8x Gb 2 56 48 5 5 45 6 66 25 5 h AMx Gb 2 72 47 47 47 8 65 34.5 69 h AMx Gb 4 82 665 45 45 35 4 62 -.5 3.5 27 h AMx Gb 4 64 64 64 8 94 -.5 59 8 h AMx Gb 5 85.6 88.9 88.9 DP2.5 77 -.4 8 62 f Rp /8 Gb 4 7 866 8 8 5 66 32 f Mx Gb 2 9 8 9 8 94-92 84 f Mx Gb 4 9 87 75 9 2 8 -.67 22 244 f Mx Gb 4 65 75 75 75 4 7 4 228 f Mx Gb 3 3 47 9 95 95 98 83 66 g Mx Gb 4 355 6 25 5 4 4 7 +.428 224 448 g Mx Gb 3 425 8 85 85 5 87 74 f Mx Gb 4 36 7 4 84 -.5 73 346 g Mx Gb 4 36 7 2 38 276 g Mx Gb 4 36 7 7 2 25 25 g Mx Gb 4 52 7 8 8 2 3 -.5 93 86 f M2x.5 Gb 4 79 6 2 3 5 4 3 6 32 g Mx Gb 4 269 54 54 6 32 -.3 78 356 f Mx Gb 8 2 228 2 74 8 2 23 46 f Mx Gb 8 65
CROSSED ROLLER SLEWING RINGS with internal gear special Single-row d T D Single-row Boundary Dimensions Designation Weight d D T G [mm] [kg] 235.9 378 57 9I-Z6-298-556 22 32. 476 84 9I-Z2-39-557 5 325.5 486 56 9I-Z6-45-89 3 44.5 644 9.5 9I-Z45-55-362 9 57 698 6 9I-Z4-626-39 53.5 783 65 85 9I-Z25-948-373 8 785 95 9I-Z32-955-68 275 794 95 9I-Z3-98-434-2 256 86.2 95 9I-Z3-98-434 23 86.2 95 9I-Z3-98-434-23 84 4 56 9I-Z4-944-355 74 92 45 92 9I-Z3-42-335 8 94 9 9I-Z3-9-3 28 958 225 9 9I-Z3-2-356 244 96 67 9 9I-Z25-75-33 7 96 75 9 9I-Z25-75-3 7 992 34 94 9I-Z3-98-2 223 8.4 36 5.5 9I-Z3-22-252 255 4 427 4 9I-Z25-35-374 349 6 6 2 9I-Z4-432-29 2 6 6 2 9I-Z4-432-29-3 2 23 6 95 9I-Z3-437-52 43 299.7 6.2 27 9I-Z36-456-792 49 375 76 5 9I-Z4-68-92 72 375 76 5 9I-Z4-68-92-723 375 76 5 9I-Z4-68-396 72 46 77 32 9I-Z32-64-34 67 428 78 9 9I-Z25-65-785 47 74.5 27 6 9I-Z5-992-24 428 66
Double-row d T D 67
SPECIAL AXIAL-RADIAL ROLLER SLEWING RINGS Double-row with inner gear Triple-row without gear d d T T D D Double-row with inner gear Triple-row without gear Boundary Dimensions Designation Weight Boundary Dimensions Designation Weight d D T G d D T G [mm] [kg] [mm] [kg] 98.9 623 94.6 9I-2R4-422-78 * 42 568.5 99.3 47 9O-3R6-75-58 363 2.9 585.5 6.9 9I-2R32-45-839 ** 76 665 65 47 9O-3R6-85-7 49 452.9 898 94.6 9I-2R4-697-99 334 328 767 94 9O-3R36-543-96 265 268 32 22 9O-3R4-293-237 342 Notes: * Original designation 9I-2Z4-422-78 ** Original designation 9I-2Z32-45-839 68
Triple-row with external gear Triple-row with internal gear d d T T D D Triple-row with external gear Triple-row with internal gear Boundary Dimensions Designation Weight Boundary Dimensions Designation Weight d D T G d D T G [mm] [kg] [mm] [kg] 4.9 493.5 4 9E-3R25-29-77 563 275. 79.7 29 9I-3R4-574-96 53 5 64 8 9E-3R2-375-46 663 784.5 2245 65 9I-3R32-248-54 396 945 2534.4 25 9E-3R45-293-59 288 837 233 8 9I-3R28-24-34 665 84 233 8 9I-3R32-24-35 745 856 233 8 9I-3R28-24-8 64 856 233 8 9I-3R28-24-8-64 2568 368 9 9I-3R28-29-98 2842 69
45 45 4 35 2.9 (8 BOLTS M2x2.5).9 (8 BOLTS M2x2.5) 4 35 2.9 (8 BOLTS M2x2.5).9 (8 BOLTS M2x2.5) 3 3 25 25 2 2 5 5 5 5 5 5 2 25 5 5 2 25 9E-Z3-823-5 9E-Z3-823-5-45 7 4 35 3 2.9 (8 BOLTS M2x2.5).9 (8 BOLTS M2x2.5) 6 5 2.9 (8 BOLTS M2x2.5).9 (8 BOLTS M2x2.5) 25 4 2 3 5 2 5 5 5 2 25 5 5 2 25 3 9E-Z3-823-5-2 9E-Z3-98-6 7 8 6 5 4 2.9 (8 BOLTS M6x2).9 (8 BOLTS M6x2) 7 6 5.9 (9 BOLTS M2x.75) 8.8 (9 BOLTS M2x.75) 4 3 3 2 2 5 5 2 25 3 2 4 6 8 9E-Z3-98-6-8 9E-Z25-384-8-7
3 25.9 (3 BOLTS M27x3) 3 25.9 (3 BOLTS M27x3) 2 8.8 (3 BOLTS M27x3) 2 8.8 (3 BOLTS M27x3) 5 5 5 5 2 4 6 2 4 6 9E-Z4-584-26 9E-Z4-584-26-3 6 4 2.9 (3 BOLTS M24x3) 45 4 35 2.9 (8 BOLTS M2x2.5).9 (8 BOLTS M2x2.5) 8 8.8 (3 BOLTS M24x3) 3 25 2 6 5 4 2 5 2 3 4 5 5 5 2 25 9I-Z4-75-3 9E-Z3-823-37 6 5.9 (3 BOLTS M2x2.5) 45 4 35 2.9 (48 BOLTS M24x3).9 (48 BOLTS M24x3) 4 3 3 8.8 (3 BOLTS M2x2.5) 25 2 2 5 5 5 5 2 2 4 6 8 9O-Z3-766-38 9O-Z4-2248-55 7
45 4 35 2.9 (48 BOLTS M24x3).9 (48 BOLTS M24x3) 2 8 6.9 (4 BOLTS M22x2.5) 3 25 2 5 4 2 8 6 8.8 (4 BOLTS M22x2.5) 4 5 2 2 4 6 8 2 3 4 9O-Z4-2248-55-9E-Z3-473-78 8 4 7 6.9 (35 BOLTS M2x2.5) 2.9 (8 BOLTS M6x2) 5 4 8.8 (35 BOLTS M2x2.5) 8 8.8 (8 BOLTS M6x2) 3 2 6 4 2 5 5 2 25 2 4 6 8 9E-Z3-823-8 9E-Z2-474- 25 45 2.9 (8 BOLTS M6x2) 4 35 2.9 (6 BOLTS M2x2.5).9 (6 BOLTS M2x2.5) 5 8.8 (8 BOLTS M6x2) 3 25 2 5 5 5 2 4 6 8 2 2 4 6 8 9E-Z2-73- 9O-B25-23-7 72
4 5 35 3.9 (2 BOLTS M2x.75) 45 4 35.9 (2 BOLTS M2x.75) 25 2 8.8 (2 BOLTS M2x.75) 3 25 8.8 (2 BOLTS M2x.75) 5 2 5 5 5 5 5 2 25 3 2 3 4 9E-Z4-254- 9E-Z6-3--3 25 25 2 2 5.9 (2 BOLTS M2x2.5) 5.9 (2 BOLTS SKRUTIEK M2x2.5) M2x2,5) 8.8 (2 BOLTS M2x2.5) 8.8 (2 BOLTS SKRUTIEK M2x2.5) M2x2,5) 5 5 2 4 6 8 2 5 5 9E-Z3-46-9 9O-Z3-46-25 25 3 2 5.9 (2 BOLTS M2x2.5) 25 2 2.9 (4 BOLTS M2x.75).9 (4 BOLTS M2x.75) 8.8 (2 BOLTS M2x2.5) 5 5 5 2 4 6 8 2 5 5 2 9E-Z3-46-26 9I-B2-644-35 73
4 2 2.9 (6 BOLTS M2x.5).9 (6 BOLTS M2x.5) 35 3 25.9 (8 BOLTS M2x2.5) 8 2 8.8 (8 BOLTS M2x2.5) 6 5 4 2 5 5 5 5 5 9I-B2-465-36 9E-Z25-675-45 35 4 3 25 2 2.9 (24 BOLTS M6x2).9 (24 BOLTS M6x2) 35 3 25 2.9 (2 BOLTS Mx.5).9 (2 BOLTS Mx.5) 2 5 5 5 5 5 5 2 25 2 3 4 5 6 9E-B25-64-5 9O-Z2-295-5 4 4 2.9 (2 BOLTS Mx.5) 2.9 (2 BOLTS Mx.5) 8 8.8 (2 BOLTS Mx.5) 8 8.8 (2 BOLTS Mx.5) 6 6 4 4 2 2 5 5 2 25 5 5 2 25 9O-Z4-93-52 9O-Z4-93-52-74
2 7 8.9 (2 BOLTS M8x.25) 6 5 2.9 (3 BOLTS M6x2).9 (3 BOLTS M6x2) 8.8 (2 BOLTS M8x.25) 4 6 3 4 2 2 5 5 2 25 2 3 4 9O-Z4-93-52-2 9I-B25-86-57 7 45 6 5 2.9 (3 BOLTS M6x2).9 (3 BOLTS M6x2) 4 35 3.9 (23 BOLTS M2x.75) 4 25 8.8 (23 BOLTS M2x.75) 3 2 2 5 5 2 3 4 5 5 2 25 3 9I-B25-86-57-9O-Z4-254-68-4 9 8.9 (6 BOLTS M3x3.5) 2.9 (9 BOLTS Mx.5) 7 6 8.8 (6 BOLTS M3x3.5) 8 8.8 (9 BOLTS Mx.5) 5 4 6 3 4 2 2 2 3 5 5 2 9I-Z3-35-74 9O-Z-25-76-2 75
4 2 8.9 (9 BOLTS Mx.5) 8.8 (9 BOLTS Mx.5) 8 6 4 2.9 (48 BOLTS M2x2.5) 8.8 (48 BOLTS M2x2.5) 6 8 4 6 4 2 2 5 5 2 2 4 6 9O-Z-25-76-3 9I-B25-296-8 3 3 25 2.9 (2 BOLTS M2x.75).9 (2 BOLTS M2x.75) 25.9 ( BOLTS M6x2) 2 2 8.8 ( BOLTS M6x2) 5 5 5 5 2 3 4 5 6 2 3 4 9E-B7-235-82 9-Z2-22-84 5 3 45 4 2.9 (24 BOLTS M6x2) 25 2.9 (36 BOLTS M24x3) 35 3.9 (24 BOLTS M6x2) 2.9 (36 BOLTS M24x3) 25 5 2 5 5 5 5 5 2 25 3 2 4 6 8 9I-B25-763-86 9I-Z4-632-94 76
9 9 8 7.9 (24 BOLTS M2x.75) 8 7.9 (24 BOLTS M2x.75) 6 6 5 8.8 (24 BOLTS M2x.75) 5 8.8 (24 BOLTS M2x.75) 4 4 3 3 2 2 2 3 4 5 6 2 3 4 5 6 9I-Z6-45-96 9I-Z6-45-96-2 2 8 6 4 2.9 (3 BOLTS -8 UNC).9 (3 BOLTS -8 UNC) 8 6 4 2.9 (6 BOLTS M6x2).9 (6 BOLTS M6x2) 2 2 8 6 8 6 4 4 2 2 2 4 6 8 5 5 2 9I-B4-24-97 9I-B32-897-98 2 3 8 6 4 2 2.9 (6 BOLTS M6x2).9 (6 BOLTS M6x2) 25 2 2.9 (44 BOLTS M2x.75).9 (44 BOLTS M2x.75) 5 8 6 4 5 2 5 5 2 5 5 2 9O-B25-475-24 9E-B2-644-28 77
4 35 3.9 (2 BOLTS Mx.5) 4 2.9 (5 BOLTS M2x2.5) 25 2 8.8 (2 BOLTS Mx.5) 8 8.8 (5 BOLTS M2x2.5) 5 6 4 5 2 2 3 4 2 3 4 5 9O-Z4-35-28 9E-B32--223 4 35 35 3 2.9 (36 BOLTS M27x3).9 (36 BOLTS M27x3) 3 25.9 (29 BOLTS M2x2.5) 25 2 2 8.8 (29 BOLTS M2x2.5) 5 5 5 5 2 4 6 8 5 5 9E-Z5-79-232 9E-Z3-58-236 6 25 4 2 2.9 (36 BOLTS M2x2.5).9 (36 BOLTS M2x2.5) 2.9 (2 BOLTS M2x2.5) 5 8 8.8 (2 BOLTS M2x2.5) 6 4 5 2 2 4 6 2 4 6 8 2 9I-B3-25-25 9O-Z3-46-26 78
4 7 2 2.9 (28 BOLTS M24x3).9 (28 BOLTS M24x3) 6 2.9 (54 BOLTS M27x3) 5.9 (54 BOLTS M27x3) 8 4 6 3 4 2 2 2 3 4 5 5 5 2 9E-Z4-25-263 9I-B6-83-267 2 25 8 6.9 (8 BOLTS 5/8- UNC) 8.8 (8 BOLTS 5/8- UNC) 2 5.9 (2 BOLTS M2x2.5) 8.8 (2 BOLTS M2x2.5) 4 2 5 2 4 6 8 2 2 4 6 8 2 9E-B2-345-273 9O-Z3-46-278 6 2 4 2 2.9 (2 BOLTS 5/8- UNC).9 (2 BOLTS 5/8- UNC) 8.9 (8 BOLTS 5/8- UNC) 8.8 (8 BOLTS 5/8- UNC) 8 6 6 4 4 2 2 5 5 2 2 4 6 8 2 9E-B25-422-285 9E-B2-345-286 79
45 4 35.9 (5 BOLTS 5/8- UNC) 6 5 2.9 (3 BOLTS M6x2) 3 25 2 8.8 (5 BOLTS 5/8- UNC) 4 3.9 (3 BOLTS M6x2) 5 2 5 2 4 6 8 5 5 2 9E-B2-223-287 9E-Z25-98-294 6 6 5 2.9 (9 BOLTS /2-3 UNC) 5 2.9 (9 BOLTS /2-3 UNC) 4.9 (9 BOLTS /2-3 UNC) 4.9 (9 BOLTS /2-3 UNC) 3 3 2 2 2 4 6 8 2 4 6 8 9O-B2-289-295 9O-B2-289-295-6 6 5 4 2.9 (9 BOLTS /2-3 UNC).9 (9 BOLTS /2-3 UNC) 5 4 2.9 (2 BOLTS 7/6-4 UNC).9 (2 BOLTS 7/6-4 UNC) 3 3 2 2 2 4 6 8 2 4 6 8 9O-B2-289-295-3 9O-B2-289-295-4 8
6 8 5 4 2.9 (2 BOLTS /2-3 UNC).9 (2 BOLTS /2-3 UNC) 7 6 5.9 (2 BOLTS 5/8- UNC) 8.8 (2 BOLTS 5/8- UNC) 3 4 2 3 2 2 4 6 8 2 4 6 8 9O-B2-289-295-5 9O-B2-289-295-6 6 45 5 4 2.9 (9 BOLTS /2-3 UNC).9 (9 BOLTS /2-3 UNC) 4 35 3.9 (48 BOLTS M27x3) 3 25 2 8.8 (48 BOLTS M27x3) 2 5 5 2 4 6 8 2 3 4 5 9O-B2-289-295-7 9E-Z3-83-297 25 8 2 7 6 5.9 (36 BOLTS M24x3) 8.8 (36 BOLTS M24x3) 5 4 2.9 (8 BOLTS /2-3 UNC).9 (8 BOLTS /2-3 UNC) 3 5 2 2 3 4 5 2 4 6 8 2 9I-Z4-385-3 9E-B2-343-3 8
3 25 2 2.9 (24 BOLTS M8x.25).9 (24 BOLTS M8x.25) 7 6 5.9 (45 BOLTS M3x3.5) 5 4 8.8 (45 BOLTS M3x3.5) 3 2 5 5 5 2 2 4 6 8 9O-B3-854-33 9O-Z5-27-35 9 35 8 7 6 5.9 (44 BOLTS M2x2.5) 8.8 (44 BOLTS M2x2.5) 3 25 2.9 (2 BOLTS M6x2) 8.8 (2 BOLTS M6x2) 4 5 3 2 5 2 3 4 5 2 3 4 5 9I-B36-75-37 9O-B3-22-38 25 5 2 5.9 (2 BOLTS M2x.75) 8.8 (2 BOLTS M2x.75) 45 4 35 3 2.9 (32 BOLTS M6x2).9 (32 BOLTS M6x2) 25 2 5 5 5 2 3 4 5 5 5 2 25 3 9O-B3-22-38-9E-B25-762-32 82
4 5 2 8.9 (36 BOLTS M2x,5) M2x.5) 8.8 (36 BOLTS M2x,5) M2x.5) 45 4 35 3 25.9 (5 BOLTS M6x2) 8.8 (5 BOLTS M6x2) 6 4 2 5 2 5 2 3 4 5 2 4 6 8 9I-B29-3-323 9O-B2-223-326 3 2 25 8 6.9 (42 BOLTS M24x3) 2 2.9 (36 BOLTS 7/8-9 UNC).9 (36 BOLTS 7/8-9 UNC) 4 2 8.8 (42 BOLTS M24x3) 5 8 6 5 4 2 2 4 6 8 2 4 6 8 9I-B5-234-327 9E-B45-5-329 45 4 4 35.9 (24 BOLTS M8x2) 35 3.9 (22 BOLTS M2x2.5) 3 8.8 (24 BOLTS M8x2) 25 8.8 (22 BOLTS M2x2.5) 25 2 2 5 5 5 5 5 5 2 25 5 5 2 25 3 9O-B2-744-34 9O-B32-58-342 83
4 2.9 (35 BOLTS -8 UNC) 4 2.9 (39 BOLTS M24x3) 8 8.8 (35 BOLTS -8 UNC) 8 8.8 (39 BOLTS M24x3) 6 6 4 4 2 2 2 4 6 2 4 6 9E-B45-854-343-9E-B4-9-345 4 9 2 8.9 (8 BOLTS 5/8- UNC) 8.8 (8 BOLTS 5/8- UNC) 8 7 6 5.9 (24 BOLTS M2x.75) 8.8 (24 BOLTS M2x.75) 6 4 4 3 2 2 2 4 6 8 2 2 4 6 8 2 9I-B2-342-35 9I-B2-342-35-4 2 35 8 6 4 2 2.9 (4 BOLTS 7/8-9 UNC).9 (4 BOLTS 7/8-9 UNC) 3 25 2 2.9 (24 BOLTS M2x.75).9 (24 BOLTS M2x.75) 8 5 6 4 2 5 2 4 6 8 5 5 2 25 9I-B45-87-352 9O-B25-64-355 84
2 25 8 6 4 2.9 (36 BOLTS M24x3).9 (36 BOLTS M24x3) 2 2.9 (28 BOLTS M27x3).9 (28 BOLTS M27x3) 2 5 8 6 4 5 2 2 4 6 8 2 4 6 8 9I-B4-252-364 9E-B5-224-37 25 25 2 2.9 (8 BOLTS M6x2).9 (8 BOLTS M6x2) 2 2.9 (2 BOLTS M8x.25).9 (2 BOLTS M8x.25) 5 5 5 5 5 5 2 25 2 3 4 9O-B3-49-377 9O-Z4-3-378 2 2.9 (3 BOLTS M2x.75) 2.9 (24 BOLTS M2x.75) 8 8.8 (3 BOLTS M2x.75) 8.9 (24 BOLTS M2x.75) 6 6 4 4 2 2 2 4 6 8 2 2 4 6 8 2 9O-B2-45-387 9O-B2-45-387-85
3 25 2 2.9 (27 BOLTS M3x3.5).9 (27 BOLTS M3x3.5) 6 4 2.9 (48 BOLTS M6x2) 8.8 (48 BOLTS M6x2) 5 8 6 4 5 2 5 5 2 4 6 9E-B57-65-388 9I-B32-2-392 4 45 2 8.9 (23 BOLTS 5/8- UNC) 8.8 (23 BOLTS 5/8- UNC) 4 35 3 25.9 (5 BOLTS 5/8- UNC) 8.8 (5 BOLTS 5/8- UNC) 6 2 4 5 2 5 2 4 6 8 2 2 4 6 8 9E-B22-344-396 9O-B22-223-397 4 6 35 3 25 2.9 (5 BOLTS 5/8- UNC).9 (5 BOLTS 5/8- UNC) 4 2.9 (6 BOLTS M2x2.5) 8.8 (6 BOLTS M2x2.5) 2 8 5 6 4 5 2 5 5 2 25 5 5 9I-B2-74-4 9O-B25-378-4 86
4 7 2.9 (36 BOLTS M2x2.5) 6 2.9 (3 BOLTS 3/4- UNC) 5.9 (3 BOLTS 3/4- UNC) 8 8.8 (36 BOLTS M2x2.5) 4 6 3 4 2 2 2 3 4 2 3 4 9I-Z3-35-46 9I-B29-76-4 8 5 7 6 2.9 (3 BOLTS 3/4-6 UNF).9 (3 BOLTS 3/4-6 UNF) 45 4 35.9 (36 BOLTS M2x2.5) 5 4 3 25 8.8 (36 BOLTS M2x2.5) 3 2 2 5 5 2 3 4 5 5 2 25 3 9I-B35-76-44 9O-B32-55-48 4 7 35 3.9 (6 BOLTS M4x2) 6 5.9 (2 BOLTS M6x2) 25 8.8 (6 BOLTS M4x2) 4 8.8 (2 BOLTS M6x2) 2 5 3 2 5 2 4 6 8 2 4 6 8 2 9O-B2-223-427 9O-B25-279-428 87
6 5 4 3.9 (35 BOLTS 3/4- UNC) 8.8 (35 BOLTS 3/4- UNC) 35 3 25 2.9 (8 BOLTS M2x2.5) 8.8 (8 BOLTS M2x2.5) 5 2 5 2 3 4 5 5 9E-B32-678-43 9O-Z3-56-432-2 8 8 6 4 2 8 6 2.9 (36 BOLTS 7/8-9 UNC).9 (36 BOLTS 7/8-9 UNC) 6 4 2 8 6.9 (6 BOLTS M6x2) 8.8 (6 BOLTS M6x2) 4 4 2 2 2 4 6 8 5 5 2 9E-B4-23-433 9O-Z2-222-44-4 8 45 7 6.9 (27 BOLTS M2x.75) 4 35 2.9 (24 BOLTS M6x2).9 (24 BOLTS M6x2) 5 8.8 (27 BOLTS M2x.75) 3 4 25 2 3 5 2 5 2 4 6 8 2 5 5 2 25 3 9E-B22-38-443 9I-B22-782-444 88
35 35 3 25 3 25 2.9 (8 BOLTS 3/4- UNC).9 (8 BOLTS 3/4- UNC) 2 2.9 (8 BOLTS /2-3 UNC).9 (8 BOLTS /2-3 UNC) 2 5 5 5 5 2 4 6 8 5 5 2 25 3 9O-B2-223-447 9I-B32-56-449 4 6 35 3 25.9 (3 BOLTS 3/4- UNC) 8.8 (3 BOLTS 3/4- UNC) 4 2 2.9 (36 BOLTS 3/4- UNC).9 (36 BOLTS 3/4- UNC) 2 8 5 6 4 5 2 5 5 2 25 3 2 4 6 8 9I-B32-56-449-9I-B4-86-45 6 6 4 2 2.9 (36 BOLTS 3/4- UNC).9 (36 BOLTS 3/4- UNC) 5 4 2.9 (3 BOLTS M6x2).9 (3 BOLTS M6x2) 8 3 6 2 4 2 2 4 6 8 5 5 2 9I-B4-86-45-9E-Z25-984-452 89
8 7 6 5 4 2.9 (3 BOLTS 3/4- UNC).9 (3 BOLTS 3/4- UNC) 4 2 8 2.9 (4 BOLTS M6x2).9 (4 BOLTS M6x2) 3 2 6 4 2 2 3 4 5 2 4 6 9I-B4-78-454 9E-B3-22-455 4 3 35 3 25 2.9 (28 BOLTS 3/4- UNC).9 (28 BOLTS 3/4- UNC) 25 2 2.9 (8 BOLTS 5/8- UNC).9 (8 BOLTS 5/8- UNC) 2 5 5 5 5 2 3 4 5 5 2 25 9E-B4-559-457 9I-B25-56-467 3 8 25 2 2.9 (24 BOLTS 5/8- UNC).9 (24 BOLTS 5/8- UNC) 7 6 5 2.9 (2 BOLTS M2x2.5).9 (2 BOLTS M2x2.5) 5 4 3 2 5 5 5 2 25 2 3 4 5 9I-B25-56-467-9O-B35-845-476 9
3 45 25.9 (6 BOLTS Mx.5) 4 35.9 (3 BOLTS M2x2.5) 2 5 8.8 (6 BOLTS Mx.5) 3 25 2 8.8 (3 BOLTS M2x2.5) 5 5 5 2 3 4 5 5 5 2 25 9O-B4-25-479 9O-Z4-595-48 6 6 4 2 2.9 (2 BOLTS 5/8- UNC).9 (2 BOLTS 5/8- UNC) 4 2 2.9 (2 BOLTS 5/8- UNC).9 (2 BOLTS 5/8- UNC) 8 8 6 6 4 4 2 2 5 5 2 5 5 2 9O-B25-422-485 9O-B25-422-485-8 8 7 6.9 (24 BOLTS M4x2) 7 6.9 (24 BOLTS M4x2) 5 8.8 (24 BOLTS M4x2) 5 8.8 (24 BOLTS M4x2) 4 4 3 3 2 2 2 4 6 8 2 4 6 8 9O-Z25-35-487 9O-Z25-35-487-9
6 4 2.9 (24 BOLTS M6x2) 6 4 2.9 (24 BOLTS M6x2) 8 8.8 (24 BOLTS M6x2) 8 8.8 (24 BOLTS M6x2) 6 4 6 4 2 2 2 4 6 8 2 2 4 6 8 2 9O-Z3-4-488 9O-Z3-4-488-4 4 35 3.9 (3 BOLTS 3/4- UNC) 2 2.9 (2 BOLTS -8 UNC).9 (2 BOLTS -8 UNC) 25 2 8.8 (3 BOLTS 3/4- UNC) 8 5 6 4 5 2 5 5 2 25 2 4 6 9I-B25-559-496 9I-B32-67-54 3 3 25 2 2.9 (23 BOLTS 3/4- UNC).9 (23 BOLTS 3/4- UNC) 25 2 2.9 (23 BOLTS 3/4- UNC).9 (23 BOLTS 3/4- UNC) 5 5 5 5 2 3 4 2 3 4 9E-B45-452-59 9E-B45-452-59-92
9 6 8 7 6 5 4.9 (24 BOLTS M2x.75) 8.8 (24 BOLTS M2x.75) 4 2 8 2.9 (6 BOLTS 3/4- UNC).9 (6 BOLTS 3/4- UNC) 3 6 2 4 2 2 3 4 5 6 5 5 2 9I-Z6-45-5 9O-B25-422-53-6 7 4 2 2.9 (2 BOLTS /2-3 UNC).9 (2 BOLTS /2-3 UNC) 6 5.9 (27 BOLTS M2x.75) 4 8 6 4 3 2 8.8 (27 BOLTS M2x.75) 2 5 5 2 2 3 4 9O-B25-422-53-2 9E-Z6-3-57 6 6 4 2.9 (8 BOLTS M8x2.5) 8.8 (8 BOLTS M8x2.5) 5 4.9 (48 BOLTS M27x3) 8.8 (48 BOLTS M27x3) 8 3 6 2 4 2 5 5 5 5 9E-B25-4-59 9E-B4-83-52 93
6 4 2.9 (36 BOLTS 7/8-9 UNC) 8.8 (36 BOLTS 7/8-9 UNC) 9 8 7 6 2.9 (3 BOLTS 7/8-9 UNC).9 (3 BOLTS 7/8-9 UNC) 8 5 6 4 2 4 3 2 2 4 6 2 3 4 5 9E-B32-86-53 9E-B32-933-53 8 9 7 6 2.9 (3 BOLTS M6x2).9 (3 BOLTS M6x2) 8 7.9 (36 BOLTS 3/4-6 UNF) 5 4 6 5 4 8.8 (36 BOLTS 3/4-6 UNF) 3 3 2 2 2 3 4 5 5 2 25 9E-B25-978-533 9I-Z3-923-534 3 5 25 45 4.9 (3 BOLTS M6x2) 2 5.9 (36 BOLTS M6x2) 8.8 (36 BOLTS M6x2) 35 3 25 8.8 (3 BOLTS M6x2) 2 5 5 5 5 5 2 25 5 5 2 9O-B35-43-537 9I-Z25-886-538 94
4 2 8 2.9 (4 BOLTS M8x2.5).9 (4 BOLTS M8x2.5) 9 8 7 6.9 (6 BOLTS M6x2) 8.8 (6 BOLTS M6x2) 5 6 4 4 3 2 2 2 4 6 2 4 6 8 9E-B35-77-542-9O-Z25-384-544 2 35 8 2.9 (24 BOLTS -8 UNC).9 (24 BOLTS -8 UNC) 3 25.9 (29 BOLTS M8x2.5) 2 8.8 (29 BOLTS M8x2.5) 6 5 4 2 5 2 4 6 5 5 2 25 9E-B45-854-545 9E-B3-57-548 8 7 7 6.9 (27 BOLTS M2x.75) 6 5.9 (36 BOLTS 7/8-9 UNC) 5 8.8 (27 BOLTS M2x.75) 4 8.8 (36 BOLTS 7/8-9 UNC) 4 3 3 2 2 2 4 6 8 2 3 4 9E-B2-39-549 9O-B4-635-55 95
9 8 7 6 2.9 (4 BOLTS M6x2).9 (4 BOLTS M6x2) 9 8 7 2.9 (24 BOLTS M2x2.5).9 (24 BOLTS M2x2.5) 5 4 3 6 5 4 3 2 2 2 3 4 2 3 4 5 9I-B2-3-552 9I-B3-995-558 6 5 4 2 2.9 (2 BOLTS /2-3 UNC).9 (2 BOLTS /2-3 UNC) 45 4 35 2.9 (4 BOLTS M2x.75).9 (4 BOLTS M2x.75) 3 8 25 6 4 2 5 2 5 5 5 2 5 5 2 25 3 9O-B25-422-564 9O-B2-844-565-5 3 45 4 35 3.9 (24 BOLTS 3/4- UNC) 8.8 (24 BOLTS 3/4- UNC) 25 2 2.9 (5 BOLTS /2-3 UNC).9 (5 BOLTS /2-3 UNC) 25 5 2 5 5 5 5 5 2 25 5 5 2 9I-B25-65-569 9E-B2-64-57 96
35 35 3 25.9 (8 BOLTS M6x2) 3 25.9 (8 BOLTS M6x2) 2 8.8 (8 BOLTS M6x2) 2 8.8 (8 BOLTS M6x2) 5 5 5 5 2 4 6 8 2 4 6 8 9O-B2-223-574 9O-B2-223-574-4 2 35 3 25 2.9 (35 BOLTS M6x2).9 (35 BOLTS M6x2) 8.9 (3 BOLTS M27x3) 2 6 8.8 (3 BOLTS M27x3) 5 4 5 2 2 3 4 2 3 4 9E-B32-574-576-9I-B35-78-577 2 45 8 6 4 2 8 6.9 (36 BOLTS M3x3.5) 8.8 (36 BOLTS M3x3.5) 4 35 3 25 2 5.9 (9 BOLTS M2x.75) 8.8 (9 BOLTS M2x.75) 4 2 5 2 4 6 8 2 3 4 5 9O-B5-9-579 9O-Z2-295-595 97
35 3 25.9 (29 BOLTS M2x2.5) 2 8 2.9 (24 BOLTS M2x.75).9 (24 BOLTS M2x.75) 2 5 8.8 (29 BOLTS M2x2.5) 6 4 5 2 5 5 5 5 9E-Z3-55-597 9I-B2-44-599 8 6 6 4 2.9 ( BOLTS M4x2) 8.8 ( BOLTS M4x2) 5 4 2.9 (3 BOLTS 3/4- UNC).9 (3 BOLTS 3/4- UNC) 8 3 6 2 4 2 2 4 6 8 2 3 4 9O-2B6-34-65 9E-B32-762-69 6 35 5 4 2.9 (36 BOLTS 3/4- UNC).9 (36 BOLTS 3/4- UNC) 3 25.9 (2 BOLTS M6x2) 3 2 8.8 (2 BOLTS M6x2) 5 2 5 2 3 4 5 5 5 2 9O-B45-654-64 9O-Z2-222-69 98
4 8 2 8 2.9 (24 BOLTS M2x.5).9 (24 BOLTS M2x.5) 6 4 2.9 (9 BOLTS Mx.5) 8.8 (9 BOLTS Mx.5) 6 8 4 6 4 2 2 5 5 2 3 4 9I-B2-465-622 9E-B4-79-624-8 6 6 4.9 (6 BOLTS 3/4- UNC) 5.9 (29 BOLTS 7/8-9 UNC) 2 8 8.8 (6 BOLTS 3/4- UNC) 4 3 8.8 (29 BOLTS 7/8-9 UNC) 6 2 4 2 5 5 2 2 3 4 9E-B25-422-627 9E-B4-63-632 8 25 7 6.9 (24 BOLTS M2x.75) 2.9 (48 BOLTS M24x3) 5 8.8 (24 BOLTS M2x.75) 5 8.8 (48 BOLTS M24x3) 4 3 2 5 2 3 4 5 2 3 4 5 9E-Z4-44-635 9I-Z4-385-639 99
6 4 2 8 6 4 2.9 (36 BOLTS M2x2.5).9 (36 BOLTS M2x2.5) 8 6 4 2 8 6 4 2.9 (8 BOLTS 3/8-6 UNC).9 (8 BOLTS 3/8-6 UNC) 2 2 2 4 6 2 3 4 5 9I-B3-25-644 9O-B2-63-65 6 4 5 4 2.9 (29 BOLTS 3/4- UNC).9 (29 BOLTS 3/4- UNC) 2 8 2.9 (3 BOLTS -8 UNC).9 (3 BOLTS -8 UNC) 3 6 2 4 2 2 3 4 2 4 6 8 9E-B45-69-65 9E-B4-29-652 8 7 6.9 (36 BOLTS M6x2) 9 8 7 5 4 8.8 (36 BOLTS M6x2) 6 5 2.9 (24 BOLTS M2x.75).9 (24 BOLTS M2x.75) 3 4 2 3 2 5 5 2 25 2 3 4 9I-Z25-75-654 9O-B2-77-655
6 3 5 25 4 2.9 (36 BOLTS Mx.5).9 (36 BOLTS Mx.5) 2 2.9 (6 BOLTS M6x2).9 (6 BOLTS M6x2) 3 5 2 5 5 5 2 25 5 5 2 25 9O-B4-229-657 9I-B25-547-66 6 6 5 4 2.9 (6 BOLTS /2-3 UNC).9 (6 BOLTS /2-3 UNC) 5 4 2.9 (3 BOLTS 5/8- UNC).9 (3 BOLTS 5/8- UNC) 3 3 2 2 2 4 6 8 2 3 4 9I-B2-298-66 9E-B3-772-664 9 2 8 7 6 5 4 2.9 (8 BOLTS /2-3 UNC).9 (8 BOLTS /2-3 UNC) 8 6.9 (9 BOLTS M8x.25) 8.8 (9 BOLTS M8x.25) 3 4 2 2 2 4 6 8 2 5 5 2 25 9E-B2-343-667 9O-B-79-67
8 7 6.9 (2 BOLTS 5/8- UNC) 8 7 6.9 (2 BOLTS 5/8- UNC) 5 4 8.8 (2 BOLTS 5/8- UNC) 5 4 8.8 (2 BOLTS 5/8- UNC) 3 2 3 2 2 4 6 8 2 4 6 8 9E-B2-289-674 9E-B2-289-674-2 5 45 4 35 3 25 2 5 2.9 (24 BOLTS M2x2.5).9 (24 BOLTS M2x2.5) 8 6 4 2 8 6 2.9 (6 BOLTS M2x.5).9 (6 BOLTS M2x.5) 4 5 2 2 3 4 5 5 2 9E-B3-685-677 9I-B22-465-68 2 35 8 2.9 (36 BOLTS 3/4- UNC).9 (36 BOLTS 3/4- UNC) 3 25.9 (2 BOLTS M6x2) 6 2 8.8 (2 BOLTS M6x2) 5 4 2 5 2 4 6 5 5 2 9I-B32-88-689 9E-Z2-25-694 2
9 4 8 7 6 5.9 (4 BOLTS M8x2.5) 8.8 (4 BOLTS M8x2.5) 2 8.9 (22 BOLTS M8x2.5) 8.8 (22 BOLTS M8x2.5) 4 6 3 2 4 2 5 5 5 5 2 9O-2B2-268-72 9O-2B25-38-73 4 25 35 3.9 (36 BOLTS /8-7 UNC) 2.9 (2 BOLTS 3/4- UNC) 25 8.8 (36 BOLTS /8-7 UNC) 5 8.8 (2 BOLTS 3/4- UNC) 2 5 5 5 2 4 6 8 5 5 2 9E-Z45-79-76 9E-B22-462-79 2 4 8 6.9 (36 BOLTS M2x2.5) 8.8 (36 BOLTS M2x2.5) 2 8.9 (36 BOLTS 7/8-4 UNF) 8.8 (36 BOLTS 7/8-4 UNF) 6 4 4 2 2 2 3 2 4 6 9E-Z3--7 9I-B4-923-73 3
2 8 6.9 (36 BOLTS M24x3) 3 25.9 (24 BOLTS M6x2) 4 2 8.8 (36 BOLTS M24x3) 2 8.8 (24 BOLTS M6x2) 5 8 6 4 2 5 2 3 4 5 5 5 2 9I-Z4-385-75 9E-B2-63-77 4 7 35 3 2.9 (8 BOLTS 5/8- UNC).9 (8 BOLTS 5/8- UNC) 6 5.9 (2 BOLTS /2-3 UNC) 25 4 8.8 (2 BOLTS /2-3 UNC) 2 5 3 2 5 2 4 6 8 2 4 6 8 9E-B2-223-78 9E-B2-37-733 3 45 25 2 5 2.9 (23 BOLTS 3/4- UNC).9 (23 BOLTS 3/4- UNC) 4 35 3 25 2.9 (32 BOLTS M6x2) 8.8 (32 BOLTS M6x2) 5 5 5 5 5 2 25 3 5 5 2 25 3 9E-B45-452-742 9I-B25-632-75 4
2 7 8 6 4 2.9 (3 BOLTS M2x.75).9 (3 BOLTS M2x.75) 6 5 2.9 (47 BOLTS /4-7 UNC).9 (47 BOLTS /4-7 UNC) 2 4 8 6 3 2 4 2 5 5 2 5 5 2 9I-B25-489-752 9E-B75-64-753 9 8 8 7 6 5 2.9 (36 BOLTS M6x2).9 (36 BOLTS M6x2) 6 4 2 2.9 (36 BOLTS M2x.75).9 (36 BOLTS M2x.75) 4 8 3 6 2 4 2 5 5 2 25 3 2 3 4 9I-Z3-9-756 9O-Z2-245-757 8 2 6 4.9 (9 BOLTS 3/4- UNC).9 (8 BOLTS 5/8- UNC) 2 8 8.8 (9 BOLTS 3/4- UNC) 8 6 8.8 (8 BOLTS 5/8- UNC) 6 4 4 2 2 5 5 2 2 4 6 8 2 9E-B25-422-76 9E-B2-343-762 5
7 6 5.9 (27 BOLTS /2-3 UNC) 9 8 7 2.9 (8 BOLTS /2-3 UNC).9 (8 BOLTS /2-3 UNC) 4 3 2 8.8 (27 BOLTS /2-3 UNC) 6 5 4 3 2 2 3 4 5 5 5 9E-Z2-39-765 9E-B22-343-768 35 6 3 25 2 2.9 (24 BOLTS 5/8- UNC).9 (24 BOLTS 5/8- UNC) 4 2 2.9 (2 BOLTS 5/8- UNC).9 (2 BOLTS 5/8- UNC) 8 5 6 4 5 2 5 5 2 25 3 5 5 2 9I-B25-56-77 9E-B25-422-779 3 8 25 2 2.9 (36 BOLTS -8 UNC).9 (36 BOLTS -8 UNC) 7 6 5 2.9 (8 BOLTS /2-3 UNC).9 (8 BOLTS /2-3 UNC) 5 4 3 2 5 2 4 6 8 2 4 6 8 2 9I-B45-378-78 9O-B2-342-789 6
7 9 6 5 4 2.9 (48 BOLTS M2x2.5).9 (48 BOLTS M2x2.5) 8 7 6 5 2.9 (36 BOLTS 3/4- UNC).9 (36 BOLTS 3/4- UNC) 3 4 2 3 2 5 5 2 2 3 4 5 9E-2B3-875-79 9O-B32-9-79 8 8 7 6 2.9 (8 BOLTS /2-3 UNC).9 (8 BOLTS /2-3 UNC) 7 6 2.9 (3 BOLTS 3/4- UNC).9 (3 BOLTS 3/4- UNC) 5 5 4 4 3 3 2 2 2 4 6 8 2 2 3 4 9O-B2-342-793 9E-B25-985-796 5 6 45 4 35 3 25.9 (32 BOLTS M6x2) 8.8 (32 BOLTS M6x2) 5 4 3 2.9 (36 BOLTS M24x3).9 (36 BOLTS M24x3) 2 5 2 5 5 5 2 5 5 9O-Z25-839-799 9E-B5-865-82 7
6 4 2 2.9 (4 BOLTS M2x2.5).9 (4 BOLTS M2x2.5) 2 8 6 4 2.9 (6 BOLTS Mx.5) 8.8 (6 BOLTS Mx.5) 8 6 4 2 8 6 4 2 2 4 6 8 2 3 4 9E-B35-8-83 9E-B6-88-85 6 5 4 2 2.9 (2 BOLTS 5/8- UNC).9 (2 BOLTS 5/8- UNC) 45 4 35 2.9 (24 BOLTS M6x2).9 (24 BOLTS M6x2) 3 8 25 6 4 2 5 2 5 5 5 2 5 5 2 25 3 9E-B25-422-86 9O-B25-763-83 9 8 7 2.9 (4 BOLTS M6x2).9 (4 BOLTS M6x2) 25 2 2.9 (24 BOLTS M6x2).9 (24 BOLTS M6x2) 6 5 5 4 3 2 5 2 3 4 5 5 2 25 9I-B22-9-832 9I-B25-547-834 8
2 3 8 2.9 (3 BOLTS M6x2).9 (3 BOLTS M6x2) 25 2 2.9 (4 BOLTS M24x3).9 (4 BOLTS M24x3) 6 5 4 2 5 2 3 4 5 2 4 6 8 9E-B3-72-836-9E-B4-476-838 35 35 3 3 25.9 (47 BOLTS M27x3) 25.9 (2 BOLTS M6x2) 2 8.8 (47 BOLTS M27x3) 2 8.8 (2 BOLTS M6x2) 5 5 5 5 2 4 6 2 3 4 5 9E-Z45-39-84 9O-B4-93-85-5 2 45 4.9 (2 BOLTS M2x.75).9 (6 BOLTS M6x2) 35 3 8.8 (2 BOLTS M2x.75) 8 8.8 (6 BOLTS M6x2) 25 6 2 5 4 2 5 2 4 6 8 5 5 9O-B2-26-85 9O-B25-38-852 9
9 8 7 6 2.9 (8 BOLTS M2x.75).9 (8 BOLTS M2x.75) 3 25 2 2.9 (48 BOLTS M2x2.5).9 (48 BOLTS M2x2.5) 5 5 4 3 2 5 2 4 6 8 2 2 4 6 8 9I-B2-388-856 9O-B45-455-857 2 9 8.9 (2 BOLTS Mx.5) 8 7 6.9 (54 BOLTS M33x3.5) 6 8.8 (2 BOLTS Mx.5) 5 4 8.8 (54 BOLTS M33x3.5) 4 3 2 2 5 5 2 5 5 9O-Z2-79-858 9I-B45-864-859 4 3 35 3 25.9 (36 BOLTS M3x3.5) 25 2.9 (48 BOLTS M24x3) 8.8 (48 BOLTS M24x3) 2 8.8 (36 BOLTS M3x3.5) 5 5 5 5 2 4 6 8 2 4 6 8 9I-B4-385-86 9I-B4-385-86
4 7 35 3.9 (2 BOLTS M2x.75) 6 5.9 (2 BOLTS M8x.25) 25 2 8.8 (2 BOLTS M2x.75) 4 8.8 (2 BOLTS M8x.25) 5 3 2 5 5 5 2 25 3 2 4 6 8 2 9E-Z4-254-862 9O-Z8-68-864 6 6 5 4 2.9 (24 BOLTS M22x2.5).9 (24 BOLTS M22x2.5) 4 2 2.9 (8 BOLTS M2x2.5).9 (8 BOLTS M2x2.5) 3 8 2 6 4 2 2 3 4 2 3 4 5 9E-B3-678-868 9I-B25-32-88 5 8 45 4 35 3 25 2 5 2.9 (6 BOLTS M2x.75).9 (6 BOLTS M2x.75) 6 4 2 8 6.9 (24 BOLTS 5/8- UNC) 8.8 (24 BOLTS 5/8- UNC) 4 5 2 2 4 6 8 5 5 2 9O-B22-26-884 9I-B25-42-893
45 4 35 3 2.9 (28 BOLTS 3/4- UNC).9 (28 BOLTS 3/4- UNC) 2 8 2.9 (36 BOLTS M2x2.5).9 (36 BOLTS M2x2.5) 25 2 6 5 4 5 2 2 3 4 2 4 6 9E-B45-559-897 9O-B3-79-898 7 2 6 5 4.9 (35 BOLTS 3/4- UNC) 8.8 (35 BOLTS 3/4- UNC) 8.9 (44 BOLTS M2x2.5) 6 8.8 (44 BOLTS M2x2.5) 3 2 4 2 2 3 4 5 5 2 9E-B3-725-9 9O-Z25-98-92 9 8 7 2.9 (54 BOLTS M3x3.5).9 (54 BOLTS M3x3.5) 2.9 (72 BOLTS M3x3.5) 6 5 4 8 6 8.8 (72 BOLTS M3x3.5) 3 4 2 2 5 5 2 5 5 2 9I-B45-249-97 9I-B45-249-97-2
35 3 3 25 2.9 (8 BOLTS M2x2.5) 8.8 (8 BOLTS M2x2.5) 25 2 2.9 (24 BOLTS 3/4- UNC).9 (24 BOLTS 3/4- UNC) 5 5 5 5 5 5 2 25 5 5 2 25 9E-B25-574-924 9E-B32-52-926 6 6 5 5 4.9 (36 BOLTS 3/4- UNC) 4.9 (36 BOLTS 3/4- UNC) 3 8.8 (36 BOLTS 3/4- UNC) 3 8.8 (36 BOLTS 3/4- UNC) 2 2 5 5 2 25 3 5 5 2 25 3 9I-B3-626-929 9I-B3-626-929-9 8 7 6 5 4 3.9 (36 BOLTS M2x2.5) 8.8 (36 BOLTS M2x2.5) 9 8 7 6 5 4 3.9 (35 BOLTS 7/8-9 UNC) 8.8 (35 BOLTS 7/8-9 UNC) 2 2 2 3 4 5 2 3 4 5 9E-B35-823-933 9E-B32-848-938 3
7 6 5 4 2.9 (6 BOLTS M2x.75).9 (6 BOLTS M2x.75) 35 3 25 2.9 (24 BOLTS 3/4- UNC) 8.8 (24 BOLTS 3/4- UNC) 3 5 2 5 2 4 6 8 5 5 2 25 9O-B2-38-945 9E-B3-533-947 7 7 6 5 2.9 (6 BOLTS 7/8-9 UNC).9 (6 BOLTS 7/8-9 UNC) 6 5 2.9 (26 BOLTS 7/8-9 UNC).9 (26 BOLTS 7/8-9 UNC) 4 4 3 3 2 2 2 3 4 2 3 4 9I-B32-788-95 9I-B32-83-95 9 2 8 7.9 (26 BOLTS -8 UNC) 2.9 (36 BOLTS 7/8-9 UNC).9 (36 BOLTS 7/8-9 UNC) 6 5 4 8.8 (26 BOLTS -8 UNC) 8 6 3 4 2 2 2 3 4 2 4 6 9I-B32-83-952 9E-B35-995-954 4
4 8 2 6 4.9 (36 BOLTS 7/8-9 UNC) 2 2.9 (24 BOLTS M2x2.5).9 (24 BOLTS M2x2.5) 8 8.8 (36 BOLTS 7/8-9 UNC) 6 8 4 6 4 2 2 2 3 4 5 2 4 6 9E-B32-94-96 9I-B3-28-963 3 4 25 2 2.9 (8 BOLTS 3/4- UNC).9 (8 BOLTS 3/4- UNC) 35 3 25.9 (35 BOLTS 3/4- UNC) 8.8 (35 BOLTS 3/4- UNC) 5 2 5 5 5 5 5 2 25 5 5 2 25 9E-B25-559-964-9E-B25-559-964-2 6 6 4 2 2.9 (2 BOLTS 5/8- UNC).9 (2 BOLTS 5/8- UNC) 4 2 2.9 (8 BOLTS M8x.25).9 (8 BOLTS M8x.25) 8 8 6 6 4 4 2 2 5 5 2 9E-B25-422-966 5 5 2 25 9O-Z-295-972 5
3 25 2.9 (24 BOLTS M2x2.5) 8.8 (24 BOLTS M2x2.5) 6 5 4 2.9 (9 BOLTS M2x2.5).9 (9 BOLTS M2x2.5) 5 3 2 5 5 5 2 25 3 5 5 9O-2B25-4-974 9O-B4-2-98 6 35 5 4 2.9 (9 BOLTS /2-3 UNC).9 (9 BOLTS /2-3 UNC) 3 25 2.9 (42 BOLTS -8 UNC).9 (42 BOLTS -8 UNC) 2 3 5 2 5 2 4 6 8 5 5 9E-B2-287-983 9I-B5-46-985 6 25 4 2 2.9 (2 BOLTS 5/8- UNC).9 (2 BOLTS 5/8- UNC) 2.9 (2 BOLTS M8x.25) 5 8.8 (2 BOLTS M8x.25) 8 6 4 5 2 5 5 2 5 5 2 25 3 9E-B25-422-989 9I-Z2-288-99 6
45 45 4 35.9 (4 BOLTS M3x2) 4 35.9 (23 BOLTS M2x.75) 3 25 8.8 (4 BOLTS M3x2) 3 25 8.8 (23 BOLTS M2x.75) 2 2 5 5 5 5 5 5 2 3 4 5 6 9I-B5-466-994 9E-B6-258-996 6 4 5 4.9 (3 BOLTS 3/4- UNC) 8.8 (3 BOLTS 3/4- UNC) 35 3 25 2.9 (3 BOLTS /2-3 UNC).9 (3 BOLTS /2-3 UNC) 3 2 2 5 5 5 5 2 25 3 5 5 2 25 9E-B25-762-998 9E-B2-74-999 4 2 2 2.9 (3 BOLTS 7/8-9 UNC).9 (3 BOLTS 7/8-9 UNC) 8 2.9 (24 BOLTS M2x.75).9 (24 BOLTS M2x.75) 8 6 6 4 4 2 2 2 4 6 5 5 9E-B4-2- 9I-B2-44-4 7
9 8 7 6 2.9 (36 BOLTS M2x.75).9 (36 BOLTS M2x.75) 2 8 6 4 2.9 (24 BOLTS M2x.75).9 (24 BOLTS M2x.75) 5 2 4 3 8 6 2 4 2 2 3 4 5 5 2 9E-B22-87-5 9O-B22-53-9 4 35 2 2.9 (36 BOLTS 3/4- UNC).9 (36 BOLTS 3/4- UNC) 3 25.9 (2 BOLTS M6x2) 8 2 8.8 (2 BOLTS M6x2) 6 5 4 2 5 2 4 6 5 5 2 25 9E-B4-2-25 9O-Z4-222-26 35 2 3 25.9 (2 BOLTS M6x2) 8 6 4.9 (6 BOLTS Mx.5) 8.8 (6 BOLTS Mx.5) 2 8.8 (2 BOLTS M6x2) 2 5 8 6 4 5 2 5 5 2 25 2 3 4 5 9O-Z4-222-26-9E-B4-88-29 8
2 9 8 7 6 2.9 (8 BOLTS /2-3 UNC).9 (8 BOLTS /2-3 UNC) 8 6 4 2.9 (9 BOLTS Mx.5) 8.8 (9 BOLTS Mx.5) 5 4 3 8 6 2 4 2 2 4 6 8 2 2 3 4 5 6 9I-B2-388-34 9O-B22-63-38 2 35 8 6 4 2.9 (2 BOLTS /2-3 UNC).9 (2 BOLTS /2-3 UNC) 3 25 2.9 (36 BOLTS M22x2.5).9 (36 BOLTS M22x2.5) 2 2 8 6 5 4 2 5 5 5 2 5 5 9O-B2-56-39 9I-B45-56-4 25 3 2 5 2.9 (3 BOLTS 7/8-9 UNC).9 (3 BOLTS 7/8-9 UNC) 25 2.9 (35 BOLTS M6x2) 8.8 (35 BOLTS M6x2) 5 5 5 2 4 6 8 2 4 6 8 2 9I-B45-257-4 9E-Z25-575-44 9
6 5 4.9 (35 BOLTS M2x2.5) 8 7 6 5.9 (27 BOLTS M2x.75) 8.8 (27 BOLTS M2x.75) 3 8.8 (35 BOLTS M2x2.5) 4 2 3 2 5 5 2 4 6 8 2 9E-Z25-675-45 9O-B22-3-49 8 6 7 6 5 2.9 (26 BOLTS M6x2).9 (26 BOLTS M6x2) 4 2.9 (24 BOLTS M24x3) 8.8 (24 BOLTS M24x3) 4 8 3 6 2 4 2 2 3 4 2 3 4 9I-B25-98-52 9I-Z3-38-53 25 3 2 2.9 (23 BOLTS 3/4- UNC) 25 5.9 (23 BOLTS 3/4- UNC) 2 5.9 (23 BOLTS 3/4- UNC) 8.8 (23 BOLTS 3/4- UNC) 5 5 5 5 2 25 5 5 2 9E-B35-445-57 9E-B25-486-63 2
6 3 5 4.9 (24 BOLTS Mx.5) 25 2.9 (2 BOLTS M2x.75) 8.8 (24 BOLTS Mx.5) 8.8 (2 BOLTS M2x.75) 3 5 2 5 2 3 4 5 6 2 3 4 5 9O-B4-325-67 9E-B6-235-7 8 2 7 6 5 4.9 (8 BOLTS 5/8- UNC) 8.8 (8 BOLTS 5/8- UNC) 8 6 2.9 (24 BOLTS -8 UNC).9 (24 BOLTS -8 UNC) 3 4 2 2 2 4 6 8 2 3 4 5 9E-B2-288-72 9I-B35-825-77 2 5 8 2.9 (24 BOLTS -8 UNC).9 (24 BOLTS -8 UNC) 45 4 35 2.9 (48 BOLTS M24x3).9 (48 BOLTS M24x3) 3 6 25 4 2 5 2 5 2 3 4 5 5 5 9I-B35-825-77-9I-2B3-995-85 2
2 8 6 2.9 (2 BOLTS /2-3 UNC).9 (2 BOLTS /2-3 UNC) 35 3 25 2.9 (2 BOLTS M6x2) 8.8 (2 BOLTS M6x2) 5 4 2 5 5 5 2 3 4 5 9O-B2-44-87 9O-B3-22-92 2 9 8 7 2.9 (24 BOLTS M24x3).9 (24 BOLTS M24x3) 8 6 4 2.9 (36 BOLTS 7/8-9 UNC).9 (36 BOLTS 7/8-9 UNC) 6 2 5 4 3 8 6 2 4 2 2 4 6 2 4 6 8 9E-B4-876-5 9E-B4-23-8 8 35 6 4 2 2.9 (24 BOLTS M2x2.5).9 (24 BOLTS M2x2.5) 3 25 2.9 (36 BOLTS 5/8- UNC) 8.8 (36 BOLTS 5/8- UNC) 8 5 6 4 2 5 2 4 6 5 5 2 25 3 9I-B3-28-9 9E-B32-548- 22
9 45 8 7 6 2.9 (48 BOLTS M3x3.5).9 (48 BOLTS M3x3.5) 4 35 3 2.9 (24 BOLTS M2x2.5).9 (24 BOLTS M2x2.5) 5 25 4 2 3 5 2 5 5 5 2 2 3 4 9I-B5-27- 9O-B3-6-3 4 45 2 2.9 (36 BOLTS 5/8- UNC).9 (36 BOLTS 5/8- UNC) 4 35 3 2.9 (36 BOLTS 5/8- UNC).9 (36 BOLTS 5/8- UNC) 8 25 6 2 4 5 2 5 2 4 6 2 3 4 9I-B3-99-4 9I-B25-682-5 8 8 6 4 2.9 (36 BOLTS M2x.5).9 (36 BOLTS M2x.5) 6 4 2.9 (36 BOLTS M2x.5).9 (36 BOLTS M2x.5) 2 2 8 8 6 6 4 4 2 2 2 4 6 8 2 4 6 8 9I-B3-22-6 9I-B3-22-7 23
4 2 8 2.9 (36 BOLTS M6x2).9 (36 BOLTS M6x2) 9 8 7 6 2.9 (24 BOLTS 5/8- UNC).9 (24 BOLTS 5/8- UNC) 6 4 5 4 3 2 2 2 4 6 8 2 4 6 9E-2B2-97-2 9O-B35-867-22 6 2 4 2.9 (36 BOLTS M24x3) 2.9 (8 BOLTS Mx.5) 8.8 (36 BOLTS M24x3) 8.9 (8 BOLTS Mx.5) 8 6 6 4 4 2 2 2 3 4 5 5 2 25 3 9I-Z4-5-23 9O-B7-83-25 4 2 2.9 (3 BOLTS M2x2.5) 9 8 8.9 (3 BOLTS M2x2.5) 7 6 2.9 (3 BOLTS 5/8- UNC).9 (3 BOLTS 5/8- UNC) 5 6 4 4 3 2 2 2 4 6 2 3 4 5 9I-B3-5-26 9I-2B2-896-29 24
3 4 25 2.9 (23 BOLTS 3/4-6 UNF).9 (23 BOLTS 3/4-6 UNF) 35 3.9 (5 BOLTS M4x2) 2 25 8.8 (5 BOLTS M4x2) 5 2 5 5 5 2 3 4 2 4 6 8 9E-B45-453-32 9E-B2-223-4 6 5 2.9 (28 BOLTS 3/4- UNC).9 (28 BOLTS 3/4- UNC) 8 7 6 2.9 (36 BOLTS M6x2).9 (36 BOLTS M6x2) 4 5 3 4 2 3 2 2 3 4 5 5 5 2 25 3 9E-B4-69-49 9I-Z3-9-5 4 2 2 2.9 (24 BOLTS M2x.75).9 (24 BOLTS M2x.75).9 (8 BOLTS M6x2) 8 8 8.8 (8 BOLTS M6x2) 6 6 4 4 2 2 2 4 6 8 2 5 5 9E-B2-345-53 9E-B2-4-6 25
9 8 7 6.9 (4 BOLTS 3/4- UNC) 8.8 (4 BOLTS 3/4- UNC) 4 35 3 25.9 (32 BOLTS M6x2) 8.8 (32 BOLTS M6x2) 5 2 4 3 2 5 5 2 3 4 5 5 2 25 9E-B25-92-62 9I-B25-632-64 2 2 8 6 4 2.9 (3 BOLTS M2x.75).9 (3 BOLTS M2x.75) 8 6 4 2.9 (3 BOLTS /8-7 UNC).9 (3 BOLTS /8-7 UNC) 2 2 8 6 8 6 4 4 2 2 5 5 2 2 4 6 8 9I-B25-489-65 9I-B5-97-66 2 7 8 2.9 (23 BOLTS 5/8- UNC).9 (23 BOLTS 5/8- UNC) 6 5 2.9 (24 BOLTS M6x2).9 (24 BOLTS M6x2) 4 6 3 4 2 2 5 5 2 3 4 9E-B22-343-67 9E-B22-975-73 26
9 4,5 8 7.9 (36 BOLTS M2x2.5) 4 3,5.9 (2 BOLTS M6x) 6 5 8.8 (36 BOLTS M2x2.5) 3 2,5 8.8 (2 BOLTS M6x) 4 2 3,5 2,5 2 3 4 5 2 4 6 8 9E-B35-823-75 9O-Z8-68-78 8 7 6 4 2 2.9 (8 BOLTS Mx.5).9 (8 BOLTS Mx.5) 6 5.9 (3 BOLTS -8 UNC) 4 8.8 (3 BOLTS -8 UNC) 8 3 6 4 2 2 5 5 2 25 2 3 4 9O-Z2-275-8 9E-B45-557-84 2 2.9 (36 BOLTS 7/8-9 UNC).9 (36 BOLTS 7/8-9 UNC) 8 8.8 (36 BOLTS 7/8-9 UNC) 8 8.8 (36 BOLTS 7/8-9 UNC) 6 6 4 4 2 2 2 3 4 5 2 3 4 5 9I-B32-897-85 9E-B32-94-86 27
5 45 4 35.9 (2 BOLTS M2x.75) 6 4 2 2.9 (3 BOLTS M2x2.5).9 (3 BOLTS M2x2.5) 3 8.8 (2 BOLTS M2x.75) 25 8 2 5 6 4 5 2 2 4 6 8 2 4 6 8 9O-B2-26-87 9I-B35-7-9 6 6 5 4.9 (29 BOLTS M24x3) 5 4.9 (35 BOLTS 3/4-6 UNF) 8.8 (35 BOLTS 3/4-6 UNF) 8.8 (29 BOLTS M24x3) 3 3 2 2 2 3 4 5 5 2 25 3 9E-2B25-539-9 9E-B25-569-93 5 5 45 4 2.9 (48 BOLTS /8-7 UNC).9 (48 BOLTS /8-7 UNC) 45 4.9 (29 BOLTS M24x3) 35 35 3 25 3 25 8.8 (29 BOLTS M24x3) 2 2 5 5 5 5 5 5 5 5 2 9E-B5-7-95 9E-B25-537-96 28
25 9 8 7 2.9 (6 BOLTS M3x3.5).9 (6 BOLTS M3x3.5) 2.9 (8 BOLTS M6x2) 6 5 8.8 (8 BOLTS M6x2) 5 4 3 2 5 5 5 2 25 2 4 6 8 2 9E-2B4-2-97 9E-Z2-73-98 6 2 4 2 2.9 (2 BOLTS 5/8- UNC).9 (2 BOLTS 5/8- UNC) 8 2.9 (48 BOLTS M3x3.5).9 (48 BOLTS M3x3.5) 8 6 6 4 4 2 2 5 5 2 5 5 2 25 9O-B25-422-2 9E-B6-24-24 9 6 8 7 2.9 (3 BOLTS M6x2).9 (3 BOLTS M6x2) 4 2 6 5 2.9 (3 BOLTS M3x3.5).9 (3 BOLTS M3x3.5) 8 4 3 6 2 4 2 2 3 4 5 5 5 2 25 9E-B25-969-25 9E-B5-2944-2 29
9 8 7 6 2.9 (8 BOLTS M2x.75).9 (8 BOLTS M2x.75) 25 2 5.9 (2 BOLTS M2x2.5) 8.8 (2 BOLTS M2x2.5) 5 4 3 2 5 2 4 6 8 5 5 2 25 9E-B6-45-22 9O-B3-446-27 2 2.9 (48 BOLTS M39x4) 8 6.9 (6 BOLTS Mx.5) 8 8.8 (48 BOLTS M39x4) 4 2 8.8 (6 BOLTS Mx.5) 6 4 8 6 2 4 2 5 5 2 3 4 5 9I-Z6-2435-28 9E-B3-88-29 2 4 8 6.9 (48 BOLTS M36x4) 8.8 (48 BOLTS M36x4) 35 3 25 2.9 (29 BOLTS M2x2.5) 8.8 (29 BOLTS M2x2.5) 4 5 2 5 5 5 5 5 2 25 3 9I-Z6-2435-22 9E-B35-58-227 3
35 5 3.9 (8 BOLTS Mx.5) 45 4 25 2 8.8 (8 BOLTS Mx.5) 35 3 2.9 (4 BOLTS 7/8-9 UNC).9 (4 BOLTS 7/8-9 UNC) 25 5 2 5 5 5 2 3 4 5 5 5 9E-B4-282-23 9I-2B3-65-234 6 3 5 25 2.9 (4 BOLTS M27x3) 4.9 (48 BOLTS M3x3.5) 2.9 (4 BOLTS M27x3) 3 8.8 (48 BOLTS M3x3.5) 5 2 5 2 4 6 8 5 5 9E-Z5-722-238 9O-B5-2-239 25 9 8 7 6.9 (75 BOLTS M3x3.5) 8.8 (75 BOLTS M3x3.5) 2 5 2.9 (4 BOLTS M24x3).9 (4 BOLTS M24x3) 5 4 3 2 5 5 5 2 2 4 6 8 9E-B6-22-24 9E-B4-278-244 3
2 8 6 4 2 2.9 (32 BOLTS M2x.75).9 (32 BOLTS M2x.75) 6 5 4 2.9 (32 BOLTS M6x2).9 (32 BOLTS M6x2) 3 8 6 2 4 2 5 5 2 2 3 4 9E-B2-545-247 9E-B25-82-249 8 6 7 6.9 (36 BOLTS M2x2.5) 4 2.9 (4 BOLTS M2x2.5) 5 4 8.8 (36 BOLTS M2x2.5) 8 8.8 (4 BOLTS M2x2.5) 3 6 2 4 2 5 5 2 25 2 3 9E-Z3-823-25 9E-Z25-468-25 8 6 6 4 2 8.9 (9 BOLTS Mx.5) 8.8 (9 BOLTS Mx.5) 4 2 8 2.9 (3 BOLTS M2x2.5).9 (3 BOLTS M2x2.5) 6 6 4 4 2 2 2 3 4 2 4 6 8 9E-B3-8-262 9I-B35-7-266 32
8 6 4 2.9 (3 BOLTS M2x.75).9 (3 BOLTS M2x.75) 25 2 2.9 (4 BOLTS M24x3).9 (4 BOLTS M24x3) 2 5 8 6 4 5 2 5 5 2 2 4 6 8 9I-B22-489-267 9I-B4-278-269 2 9 8 7 2.9 (36 BOLTS M6x2).9 (36 BOLTS M6x2) 8.9 (32 BOLTS -8 UNC) 6 8.8 (32 BOLTS -8 UNC) 5 6 4 3 4 2 2 2 3 4 5 2 3 4 5 9I-2B2-897-277 9I-B32-788-283 9 35 8 7 6 5 2.9 (3 BOLTS M6x2).9 (3 BOLTS M6x2) 3 25 2.9 (36 BOLTS M27x3) 8.8 (36 BOLTS M27x3) 4 5 3 2 5 2 3 4 2 4 6 9E-B25-969-289 9E-Z36-87-29 33
5 45 4 35.9 (6 BOLTS M27x3) 8.8 (6 BOLTS M27x3) 25 2.9 (4 BOLTS /4-7 UNC) 3 5 8.8 (4 BOLTS /4-7 UNC) 25 2 5 5 5 5 5 2 4 6 8 9I-B5-559-297 9O-B5-953-299 7 7 6 5.9 (47 BOLTS M33x3.5) 6 5 2.9 (48 BOLTS M3x3.5).9 (48 BOLTS M3x3.5) 4 8.8 (47 BOLTS M33x3.5) 4 3 3 2 2 5 5 2 5 5 2 9E-B6-495-3 9I-B5-722-3 2 3 8 2.9 (8 BOLTS M2x.75).9 (8 BOLTS M2x.75) 25 2.9 (35 BOLTS M6x2) 8.8 (35 BOLTS M6x2) 6 5 4 2 5 5 5 2 4 6 8 2 9O-B2-386-32 9E-Z25-576-322 34
4 25 35 3 2.9 (3 BOLTS /4-7 UNC).9 (3 BOLTS /4-7 UNC) 2 2.9 (48 BOLTS M2x2.5).9 (48 BOLTS M2x2.5) 25 5 2 5 5 5 5 5 2 4 6 8 9E-B5-399-332 9O-B25-455-334 25 4 2 5 2.9 (2 BOLTS M2x.75).9 (2 BOLTS M2x.75) 2 8.9 (3 BOLTS M2x.75) 8.8 (3 BOLTS M2x.75) 6 4 5 2 2 4 6 8 2 2 4 6 8 9I-Z2-742-335 9I-Z8-489-337 25 8 2 5 2.9 (3 BOLTS M24x3).9 (3 BOLTS M24x3) 6 4 2.9 (3 BOLTS M24x3) 8.8 (3 BOLTS M24x3) 8 6 5 4 2 2 4 6 8 2 4 6 9I-B4-24-34 9E-B22-22-342 35
25 2 6 5 5 2.9 (8 BOLTS M4x2).9 (8 BOLTS M4x2) 4 2.9 (24 BOLTS M6x2).9 (24 BOLTS M6x2) 3 2 5 5 5 2 25 2 3 4 9E-B25-475-345 9E-B25-765-347 3 6 25 2 2.9 (4 BOLTS M24x3).9 (4 BOLTS M24x3) 5 4 2.9 (29 BOLTS 3/4- UNC).9 (29 BOLTS 3/4- UNC) 5 3 2 5 2 4 6 8 2 3 4 5 9E-B4-278-349 9O-B45-559-35 7 9 6 5.9 (3 BOLTS M2x2.5) 8 7 6 2.9 (45 BOLTS M3x3.5).9 (45 BOLTS M3x3.5) 4 8.8 (3 BOLTS M2x2.5) 5 3 4 2 3 2 5 5 2 25 5 5 2 9O-Z3-82-35 9I-B6-245-353 36
2 8 8 6 2.9 (2 BOLTS 3/4- UNC).9 (2 BOLTS 3/4- UNC) 7 6 5 4 2.9 (4 BOLTS M3x3.5).9 (4 BOLTS M3x3.5) 4 3 2 2 2 4 6 5 5 2 9O-B4-883-354 9E-B6-98-358 4 35 35 3.9 (29 BOLTS 3/4-3 25.9 (24 BOLTS 3/4- UNC) 25 8.8 (29 BOLTS 3/4-2 8.8 (24 BOLTS 3/4- UNC) 2 5 5 5 5 5 5 2 25 3 5 5 2 25 9O-B32-548-36 9E-B25-584-365 25 2 2 5 2.9 (6 BOLTS M6x2).9 (6 BOLTS M6x2) 8 6 4 2 2.9 (36 BOLTS M2x2.5).9 (36 BOLTS M2x2.5) 8 6 5 4 2 5 5 2 25 2 4 6 8 9E-B25-55-368 9E-2B25-39-386 37
25 2 2.9 (78 BOLTS M3x3.5).9 (78 BOLTS M3x3.5) 25 2 2.9 (48 BOLTS 3/4- UNC) 5 5.9 (48 BOLTS 3/4- UNC) 5 5 2 3 4 2 4 6 8 9E-B6-3585-387 9I-B3-455-389 8 7 6 5.9 (27 BOLTS M2x.75) 8.8 (27 BOLTS M2x.75) 9 8 7 6 2.9 (48 BOLTS M2x2.5).9 (48 BOLTS M2x2.5) 4 5 3 2 4 3 2 2 4 6 8 2 5 5 9E-B22-38-397 9E-B32-33-399 45 4 35 3 25 2 5.9 (24 BOLTS M2x2.5) 8.8 (24 BOLTS M2x2.5) 9 8 7 6 5 4 3 2.9 (35 BOLTS 3/4- UNC).9 (35 BOLTS 3/4- UNC) 2 5 5 5 2 25 2 3 4 5 9I-B25-655-4 9E-B32-94-4 38
25 2.9 (24 BOLTS M6x2) 5 8.8 (24 BOLTS M6x2) 5 2 4 6 8 9I-Z8-635-42 39
CUSTOMER REQUIREMENTS ON PSL PRODUCT SLEWING RING PSL, a.s. Robotnícka 7 Považská Bystrica Slovakia. Customer Company name: Address: Town: ZIP: State: Contact person: Depart.: Phone: Fax: E-mail: 2. Application Description of application, machine: Machine type: Info also available at web: Bearing will be used for: New application Replacement, spare parts 3. Operation / Speed Rotating ring: Outer ring Inner ring Axis of rotation: Vertical axis Horizontal axis (Bearing installed horizontally) Angular (Please, specify in Remarks) (Bearing installed vertically) Variable (Please, specify in Remarks) Direction of rotation: Mainly one-direction Cyclic (Oscillating) Way of rotation: Continuous Interrupted/Intermittent Maximal speed: rpm Maximal angle of rotation Required life: hours or cycles Remarks: 4. Dimensions Most suitable Acceptable range Outer diameter mm inch mm (max) inch (max) Inner diameter mm inch mm (min) inch (min) Overall height mm inch mm (max) inch (max) Outer ring (most suitable) Inner ring (most suitable) Fixing bolt circle diameter: mm inch mm inch 5. Bearing loads Load Loads Gear** Rotational speed cases Nominal Axial* Radial Moment Tooth load Gear torque Max Average 2 3 4 Maximum Unit of measurement kn, knm lbs, lbs.ft Time Share % * Axial loads positive if compression, negative if tensile ** Please, fill one data only, either tooth load or torque ring gear Page /2 4
6. Gear requirements External gear Internal gear No gearing Tooth form: Modul/DP: Contact angle - α: Number of teeth z Profile correction xm Gear width b Other requirements (precision, quality): Notes: Please, include the drawing of the pinion if possible Pinion Geared ring 7. Bolts Metric only SAE only Metric or SAE Bolt diameter: Bolt material: Outer ring bolt holes: Inner ring bolt holes: Thru without thread Thru without thread Thru and counterbored Thru and counterbored Thru tapped Thru tapped Tapped and counterbored Tapped and counterbored Tapped and dead hole Tapped and dead hole Without special request Without special request 8. Special requirements Seals are required Extremely dirty No grease lubrication Oil lubrication Location specification of grease holes: Outer ring Inner ring Outer diameter Inner diameter Mounting site Mounting site Other (specify in Remarks) Other (specify in Remarks) High temperature (>5 C) Max. temperature Low temperature (<-25 C) Min. temperature Precise/Preloaded bearing (Please provide details in Remarks) Rolling elements must be caged. No spacers Remarks: 9. Offer Required date of offer: Required date of delivery: Demanded quantity: Annual requirements: For full understanding of your requirements please provide, if possible, applicable drawings or sketches. pcs pcs/year Individual consultation required. Please call for appointment Please send the filled questionnaire to one of the following address: Thank you very much for your cooperation PSL, a.s. Slovakia tel: +42 42 437 46 fax: +42 42 4326 644 e-mail: pslpb@pslas.com PSL Wälzlager GmbH Germany +49 674 828 98 3 +49 674 828 98 33 info@psl-gmbh.de PSL of America, Inc. USA + 33 45 888 + 33 45 398 sales@pslamerica.com PSL OOO Russia +7 495 925 687 +7 495 925 688 pslopora@yandex.ru Page 2/2 4
TYPICAL APPLICATIONS INVOLVING PSL SLEWING RINGS The contents of this catalog have been carefully evaluated and checked, however due to continued technical developments, PSL reserves the right to make technical changes or amendments without prior notice. PSL, a. s. 2 42
PSL_25-2-TPO-OTO-A_obalka.indd 3/6/ 3:5:32 PM PSL 22-28 LSK-A karuselove loziska obalka.indd 2 PSL_4-22-IP-A- obalka_worm drives.indd 3 5/3/ 2:56: PM 2// 2:4:9 PM 3375-_PSL_24-2-VLO-A_obalka.indd 5/3/ 2:47:3 PM OTHER PSL LITERATURE rolling bearings crossed tapered roller bearings rolling bearings technical handbook production program production program 26/2-TP-VL-A 22/28-LSK-A 24/2-VLO-A slewing rings w orm drives technical handbook p roduction program 25/2-TPO-A 4/22-IP-A-Rev.
Headquarters and Production Plant PSL, a. s. Robotnícka ul., 7 Považská Bystrica, Slovakia Phone: +42 42 437, Fax: +42 42 4326 644 E-mail: pslpb@pslas.com www.pslas.com Sales to the USA PSL of America, Inc. 23 Case Parkway South Twinsburg, Ohio 4487 USA Phone: + 33 45 888 Fax: + 33 45 398 E-mail: sales@pslamerica.com www.pslofamerica.com Sales to West Europe PSL Wälzlager GmbH Waldstrasse 23/B3 63 28 Dietzenbach Germany Phone: +49 674 8289 83 Fax: +49 674 8289 83 3 E-mail: info@psl-gmbh.de Sales to Russia PSL OOO ul. Krasnogo Mayaka 26 7 57 Moscow Russian Federation Phone: +7 495 925 687 Fax: +7 495 925 688 E-mail: pslopora@yandex.ru Design: Reklamný servis, 2