MINI XVTORS /// TS OPRTIN WIHT: 5 kg ( lbs) / 59 kg (55 lbs) / kg ( lbs) / kg (5 lbs) NTT NIN POWR:. kw (9hp) K L H I J STTI IMNSIONS Machine model TS TS TS TS mm (ft-in) mm (ft-in) mm (ft-in) mm (ft-in) Sprocket idler centres 7 (-) 7 (-) 7 (-) (-5½) Undercarriage overall length (-7) (5-) (5-) 7 (5-) Kingpost clearance 7 (-) 7 (-) 7 (-) 7 (-¼) Tailswing radius (-½) (-½) (-½) 7 (-½) Overall width of superstructure 9 (-½) 9 (-½) 9 (-½) 9 (-½) Height over cab (7-7) (7-7) (7-7) (7-7¼) round clearance 5 (-) 5 (-) 5 (-) (5½) H Track gauge 7 (-5) 7 (-5) 75 to 75 to (-5½ to -7¾) (-5½ to -7¾) Machine model TS TS TS TS mm (ft-in) mm (ft-in) mm (ft-in) mm (ft-in) I Width over tracks (retracted) 97 (-) 97 (-) 9 (-½) (-½) Width over tracks (extended) N/ N/ (-5) (-5½) J Transport length Standard dipper (-¾) (-¾) (-½) 5 (-) J Transport length Long dipper N/ (-¼) 5 (-) N/ J Transport length ravemaster dipper N/ N/ 9 (-¾) N/ K Transport height with OS guard (7-7) (7-7) (7-7) (7-7¼) K Transport height without OS guard (7-½) (7-½) (7-½) (7-¾) L Track height (-) (-) (-) (-½)
MINI XVTORS /// TS NIN Machine Model / / / TS Model - Tier III uel iesel ooling Water cooled ross power ISO 9 kw (hp) @ rpm.7 (9.7) Nett power kw (hp) @ rpm. (9) ross torque ISO 9 Nm (lbf ft) @ rpm. (9.7) Nett torque Nm (lbf ft) @ rpm. (7.5) isplacement cc / litres /. radeability degrees 5 Starter motor kw (hp). (.) attery volt / h v / lternator amps UNRRRI Machine model TS TS TS TS No of bottom rollers Track width mm (in) (9) (9) (9) 5 (9¾) round bearing pressure kg/cm² (lb/in²). (.9). (.7). (.55). (5.) round clearance mm (in) 5 () 5 () 5 () (5¾) Track tensioning Screw rease rease rease Travel speed low kph (mph) (.) (.) (.). (.) Travel speed high kph (mph) N/. (.). (.) (.9) Tractive effort kn (lbf). (9). (5). (5). () HYRULI SYSTM TS Standard gear pump Pump Triple section ear Nominal output lpm 9. (.5 x.5 x.) Nominal output US gal/min. (. x. x.) xcavator/track main relief bar (psi) () Slew main relief bar (psi) () uxiliary hydraulic flow lpm (US gal/min).9 (7.) Hydraulic motors Piston HYRULI SYSTM TS Standard gear pump Optional variable pump Pump Triple section ear Variable ( Ports) / ear Nominal output lpm 9. (.5 x.5 x.).5 (.9 x.9 x.7) Nominal output US gal/min. (. x. x.). (.9 x.9 x.) xcavator/track main relief bar (psi) () () Slew main relief bar (psi) () () uxiliary hydraulic flow lpm (US gal).9 (7.) 9. (7.9) Hydraulic motors Piston Piston HYRULI SYSTM TS Standard gear pump Optional variable pump Pump Triple section ear Variable ( Ports) / ear Nominal output lpm. (5.7 x 5.7 x.).9 (7. x 7. x.7) Nominal output UK gal/min.5 (. x. x.). (.5 x.5 x.) xcavator/track main relief bar (psi) () () Slew main relief bar (psi) () () uxiliary hydraulic flow litres (UK gal). (.). (9.) Hydraulic motors Piston Piston HYRULI SYSTM TS Standard variable pump Pump Variable ( Ports) / ear Nominal output lpm 55. ( x x.) Nominal output US gal/min. (5. x 5. x.) xcavator/track main relief bar (psi) () Slew main relief bar (psi) () uxiliary hydraulic flow lpm (US gal/min) (.) Hydraulic motors Piston
MINI XVTORS /// TS STNR QUIPMNT TS ROPS & TOPS certified canopy, full audio/visual warning systems, slew travel lock, control isolator, external lockable toolbox, v power socket, lifting points, rubber tracks, ISO servo controls, vinyl static seat, boom worklight, boom ram protection, dozer blade, mm (ft-in) dipper. OPTIONL QUIPMNT TS ROPS & TOPS certified fully glazed cab (includes heater, interior light, cigar lighter, door holdback latch with internal/external release, gas strut assisted front screen), dual pattern controls (ISO/S change-over), double-acting auxiliary circuit, cab/canopy mounted worklights, engine fan guard kit, OPS roof guard, yellow roof moulding, 9 digging buckets (mm to 7mm (in to in)), ditching/grading buckets (9mm & mm (5in and 9in)), hydraulic breakers, earthdrills, mechanical quickhitch, hydraulic kerb-lifter, bushed kingpost, rotating or strobe beacon, toolkit and greasegun, heavy duty track tension, J impact protection front screen. STNR QUIPMNT TS ROPS & TOPS certified canopy, full audio/visual warning systems, slew travel lock, control isolator, external lockable toolbox, v power socket, lifting points, rubber tracks, ISO servo controls, static seat, boom worklight, double acting auxiliary circuit, boom ram protection, triple section gear pump, dozer blade, mm (ft-in) dipper. STNR QUIPMNT TS ROPS & TOPS certified canopy, full audio/visual warning systems, slew travel lock, control isolator, external lockable toolbox, v power socket, lifting points, rubber tracks, -speed autoshift tracking, hydraulically extending undercarriage, ISO servo, variable gear pump, unit spring tensioner, bushed kingpost. OPTIONL QUIPMNT TS ROPS & TOPS certified fully glazed cab (includes heater, interior light, cigar lighter, door holdback latch with internal/external release, gas-strut-assisted front screen), suspension seat, dual pattern controls (ISO/S change-over), cab/canopy mounted worklights, handheld tool circuit, engine fan guard kit, OPS roof guard, mirror, track pedals, toolkit, radio, biodegradeable hydraulic oil, fire extinguisher, sunblind (cab builds), battery isolator, travel alarm, immobiliser, yellow roof moulding, 9 digging buckets (mm to 7mm), ditching/grading buckets (9mm & mm), hydraulic breakers, earthdrills, mechanical quickhitch, hydraulic kerb-lifter, rotating or strobe beacon, toolkit and greasegun, heavy duty track tension, J impact protection front screen. OPTIONL QUIPMNT TS ROPS & TOPS certified fully glazed cab (includes heater, interior light, cigar lighter, door holdback latch with internal/external release, gas strut assisted front screen), suspension seat, dual pattern controls (ISO/S change-over), cab/canopy mounted worklights, mm (ft-in) long dipper, speed auto-shift tracking, long dozer blade, dipper pipework, hand held tool circuit, variable displacement pump, engine fan guard kit, OPS roof guard, mirror, track pedals, radio, biodegradeable hydraulic oil, fire extinguisher, sunblind (cab builds), battery isolator, travel alarm, immobiliser, rotating or strobe beacon, toolkit and greasegun, heavy-duty track tension, J impact protection front screen, bushed kingpost, yellow roof moulding, 9 digging buckets mm to 7mm (in to in)), ditching/grading buckets (9mm & mm (5in and 9in)), hydraulic breakers, earthdrills, mechanical quickhitch, hydraulic kerb-lifter. STNR QUIPMNT TS I J ROPS & TOPS certified canopy, full audio/visual warning systems, slew travel lock, control isolator, external lockable toolbox, v power socket, lifting points, rubber tracks, speed auto-shift tracking, hydraulically extending undercarriage, ISO servo controls, static seat, boom worklight, double acting auxiliary circuit, boom ram protection, triple section gear pump, extendable dozer blade, mm (ft-in) dipper. OPTIONL QUIPMNT TS H ROPS & TOPS certified fully glazed cab (includes heater, interior light, cigar lighter, door holdback latch with internal/external release, gas strut assisted front screen), suspension seat, dual pattern controls (ISO/S change-over), cab/canopy mounted worklights, mm (ft-in) long dipper, 5mm (ft-in) ravemaster dipper*, long dozer blade, dipper pipework, hand held tool circuit, variable displacement pump, engine fan guard kit, OPS roof guard, mirror, track pedals, toolkit, radio, biodegradeable hydraulic oil, fire extinguisher, sunblind (cab builds), battery isolator, travel alarm, immobiliser, yellow roof moulding, 9 digging buckets (mm to 7mm (in to in)), ditching/grading buckets (9mm & mm (5in and 9in)), hydraulic breakers, earthdrills, mechanical quickhitch, hydraulic kerb-lifter, bushed kingpost, rotating or strobe beacon, toolkit and greasegun, heavyduty track tension, J impact protection front screen. * uxiliary pipework is not available with ravemaster dipper option.
MINI XVTORS /// TS - - - - - - - - - - - - 5 - - - - Metres 5 - - - - Metres - - - eet - - - eet Machine model TS oom length mm (ft-in) 5 (5-) ipper length mm (ft-in) (-) Max digging reach mm (ft-in) 7 (-7) Max digging reach on ground mm (ft-in) 7 (-) Max digging depth dozer up mm (ft-in) (-½) Max digging depth dozer down mm (ft-in) 57 (7-9) Max digging height mm (ft-in) 9 (-) Max dump height mm (ft-in) 5 (-½) Max height to dipper nose pivot pin mm (ft-in) 9 (9-7) Max vertical wallcut depth mm (ft-in) 59 (5-5) H Min. front swing radius (no offset) mm (ft-in) (5-½) Min. front swing radius (fully offset) mm (ft-in) 57 (-9) I oom swing left degrees 55 J oom swing right degrees 75 ucket rotation degrees 9 ipper rotation degrees ucket tearout kn (lbf).5 (5) ipper tearout kn (lbf) (79) Slew speed rpm Machine model TS oom length mm (ft-in) 5 (5-) 5 (5-) ipper length mm (ft-in) (-) (-) Max digging reach mm (ft-in) 7 (-7) 9 (-) Max digging reach on ground mm (ft-in) 7 (-) 7 (-7½) Max digging depth dozer up mm (ft-in) (-½) (7-½) Max digging depth dozer down mm (ft-in) 57 (7-9) 57 (-) Max digging height mm (ft-in) 9 (-) 5 (-) Max dump height mm (ft-in) 5 (-½) 559 (-5) Max height to dipper nose pivot pin mm (ft-in) 9 (9-7) 95 (9-9) Max vertical wallcut depth mm (ft-in) 59 (5-5) 75 (5-9) H Min. front swing radius (no offset) mm (ft-in) (5-½) 5 (5-) Min. front swing radius (fully offset) mm (ft-in) 57 (-9) (-) I oom swing left degrees 55 55 J oom swing right degrees 75 75 ucket rotation degrees 9 9 ipper rotation degrees ucket tearout kn (lbf). (). () ipper tearout kn (lbf) (79) 7.5 () Slew speed rpm
MINI XVTORS /// TS - - - - - - - - - - - - 5 - - - - Metres 5 - - - - Metres - - - eet - - - eet Machine model TS oom length mm (ft-in) (5-5) (5-5) (5-5) ipper length mm (ft-in) (-) (-) 5 (-) Max digging reach mm (ft-in) 9 (-) (-½) 5 (-½) Max digging reach on ground mm (ft-in) 5 (-) 99 (-) (-¾) Max digging depth dozer up mm (ft-in) (7-) (7-) 77 (-½) Max digging depth dozer down mm (ft-in) 7 (-) 57 (-5) 5 (9-½) Max digging height mm (ft-in) (-) 59 (-½) (-) Max dump height mm (ft-in) 5 (-5) (-7) 75 (9-¾) Max height to dipper nose pivot pin mm (ft-in) 97 (9-9) (9-) 7 (-¾) Max vertical wallcut depth mm (ft-in) 75 (5-9) 5 (-½) (-) H Min. front swing radius (no offset) mm (ft-in) 75 (5-7½) 79 (5-½) 79 (5-½) Min. front swing radius (fully offset) mm (ft-in) 59 (5-) 55 (5-) 57 (5-) I oom swing left degrees 55 55 55 J oom swing right degrees 75 75 75 ucket rotation degrees 9 9 9 ipper rotation degrees ucket tearout kn (lbf). (). () ipper tearout kn (lbf) 9. (). () Slew speed rpm Machine model TS oom length mm (ft-in) 79 (5-) ipper length mm (ft-in) (-) Max digging reach mm (ft-in) 5 (-7¾) Max digging reach on ground mm (ft-in) 5 (-) Max digging depth dozer up mm (ft-in) (7-¾) Max digging depth dozer down mm (ft-in) (-7¼) Max digging height mm (ft-in) 5 (¼) Max dump height mm (ft-in) 77 (9-) Max height to dipper nose pivot pin mm (ft-in) 7 (-5) Max vertical wallcut depth mm (ft-in) 9 (-½) H Min. front swing radius (no offset) mm (ft-in) (½) Min. front swing radius (fully offset) mm (ft-in) 9 (-5¼) I oom swing left degrees 55 J oom swing right degrees 75 ucket rotation degrees 9 ipper rotation degrees ucket tearout kn (lbf) 9.* (.77) ipper tearout kn (lbf) 9. (9.7) Slew speed rpm 9.
MINI XVTORS /// TS TS LIT PITIS mm (9in) Rubber Tracks, mm (ft in) dipper, No bucket. Reach from slew centre Load Point.m (ft in).5m (ft in) m (ft 7in).5m (ft in) apacity at maximum reach Height ozer up ozer down ozer up ozer down ozer up ozer down ozer up ozer down ozer up ozer down m (ft-in) kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg mm (ft-in).5 (-) * * * 7 5* (-7 ) (-) 9* 5* * * 5* * * 9* 9 5 7* 5 (-).5 (-) 5 7* 59 79* 7* * 5 (-) round Level 9* 5* 5 5* 5 * 5 9* 5 (-).5 (-) 5 9* 5 9* 7 5* 5 * 5 * 7 (9-) (-) 5* 7 79* 7 55* 9* 5 95 9* 9 5 (-) TS LIT PITIS Standard ozer, mm (9in) Rubber Tracks, mm (ft in) dipper, No bucket. Reach from slew centre Load Point.m (ft in).5m (ft in) m (ft 7in).5m (ft in) apacity at maximum reach Height ozer up ozer down ozer up ozer down ozer up ozer down ozer up ozer down ozer up ozer down m (ft-in) kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg mm (ft-in).5 (-) * 5* 7* * (-7 ) (-) 99* 5* 99* * 7* 97* * 9 9* 77 (-).5 (-) 55 9* 9 5* 7 * 7 * 9 (-) round Level 59 9* 95 9 57* 7 9 57* 9 9* 7 7 * 5 (-).5 (-) 5 * 5 79* 5 7 5* 5 * 5 7* 7 (9-) (-) 5 7* 57 7 75* 9 5* 9* 9* 5 (-) Lift capacity front and rear. Lift capacity full circle. Notes:. Lifting capacities are based on ISO 57, that is: 75% of minimum tipping load or 7% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.. Lift capacities assume that the machine is on firm, level ground and equipped with an approved lifting point.. bucket must be fitted when lifting, the weight of this bucket must be deducted from the above lift capacities.. Lift capacities may be limited by local regulations. Please refer to your dealer.
MINI XVTORS /// TS TS LIT PITIS Standard ozer, mm (9in) Rubber Tracks, mm (ft in) dipper, No bucket. Reach from slew centre Load Point.m (ft in).5m (ft in) m (ft 7in).5m (ft in) apacity at maximum reach Height ozer up ozer down Retracted xtended ozer up ozer down Retracted xtended ozer up ozer down Retracted xtended ozer up ozer down Retracted xtended ozer up ozer down Retracted xtended istance m (ft-in) kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg mm (ft-in).5 (-) * * * 7* 7 * 5* (-) (-) 5* 5* 5* * 5* 5* 5* * 59* 7* 5* 5* 7* 5* 5 (-5 ).5 (-) * 57* 9 5* 9 5* * 7 5* * 7 7* 5 9 5 (-5 ) round Level 77 7* 5* 5 5* 7* 7* 9 5* 7* (- ).5 (-) 9* 7 55 95 9* 5 7 5* 5 7* 7 9* 5 (- ) (-) 7* 7 55 * 7 557* 9* 79 9 * 5 55 9 (9-) TS LIT PITIS Standard ozer, mm (9in) Rubber Tracks, mm (ft in) dipper, No bucket. Reach from slew centre Load Point.75m (5ft 9in).m (ft in).5m (ft in).m (9ft in) apacity at maximum reach Height ozer up ozer down 9 ozer up ozer down 9 ozer up ozer down 9 ozer up ozer down 9 ozer up ozer down 9 m (ft-in) kg kg kg kg kg kg kg kg kg kg kg kg kg kg kg m (ft-in). (-)..... 5.. (-).5 (-). 5.5. 5. 55 9.. 7. 7..5 (-). (-).9.*. 5... 7.... 7.9.. 79. 75.7. (-).5 (-) 7..* 75.. 59. 57....9...7 77.5.* 5.5*.5 (-9) round level 75.5* 9. 795.7* 555.*.9 55.5*.* 57..* 9.*. 7.5*.* 9.*.7*.5 (-).5 ( -) 7.5*. 57.* 5.7* 75. 5.*.* 555..5*.*.7.*.*.5* 75.*. (-). ( -) 7.*.. 9.* 75. 5.7* 7.5* 59..*.5*. 7.*.5*.* 7.*. (9-) Lift capacity front and rear. Lift capacity full circle. Notes:. Lifting capacities are based on ISO 57, that is: 75% of minimum tipping load or 7% of hydraulic lift capacity, whichever is the less. Lifting capacities marked* are based on hydraulic capacity.. Lift capacities assume that the machine is on firm, level ground and equipped with an approved lifting point.. bucket must be fitted when lifting, the weight of this bucket must be deducted from the above lift capacities.. Lift capacities may be limited by local regulations. Please refer to your dealer.
MINI XVTORS /// TS OPRTOR NVIRONMNT xternal Internal ab/canopy height with OS guard mm (ft-in) (7-7) 9 (7-5) ab/canopy height no OS guard mm (ft-in) (7-½) 9 (7-5) ab/canopy length mm (ft-in) 7 (-) 7 (-) ab/canopy width mm (ft-in) 97 (-) (-) istance from seat base to roof mm (ft-in) (-) oor aperture width mm (ft-in) (-½) SRVI PITIS Machine model TS TS TS TS uel tank litres (US gal).5 (.).5 (.).5 (.).5 (.) ngine coolant litres (US gal) 5 (.) 5 (.) 5 (.) 5 (.) ngine oil litres (US gal) (.) (.) (.) (.) Hydraulic system litres (US gal) (7.) (7.) (7.) (7.9) Hydraulic tank litres (US gal) 5 (.) 5 (.) 5 (.) 5 (.) MHIN WIHTS Machine model TS TS TS TS Operating weight* kg (lb) 5 () 59 (55) () 999 (7) Transport weight kg (lb) 9 () 55 () 57 (99) 9 () With canopy kg (lb) - (-7) - (-7) - (-7) - (-7) With OS guard kg (lb) +5 (+55) +5 (+55) +5 (+55) +5 (+55) With long dipper kg (lb) N/ + (+ ) + (+ ) N/ With ravemaster dipper kg (lb) N/ N/ +7 (+5 ) N/ *Operating weight to ISO including cab, rubber tracks, standard dipper, mm (in) bucket, full tanks and a 75kg (5lb) operator. OZR L Machine model TS TS Standard Standard Long Max height (above ground) mm (ft-in) 7 (-7) 7 (-7) 7 (-½) ig depth (below ground) mm (ft-in) 9 (-½) 9 (-½) (-5¼) pproach angle degrees.5.5.5 Width mm (ft-in) (-) (-) (-) Width (extended) mm (ft-in) N/ N/ N/ Height mm (ft-in) 5 (-9) 5 (-9) 7 (-¾) Reach in front of tracks mm (ft-in) (-) (-) (-5½) OZR L Machine model TS TS Standard Long Long as standard Max height (above ground) mm (ft-in) 7 (-7) 7 (-½) 7 (-½) ig depth (below ground) mm (ft-in) 9 (-½) (-5¼) (-5¼) pproach angle degrees.5.5.5 Width mm (ft-in) (-) (-) (-) Width (extended) mm (ft-in) (-¼) (-¼) (-¼) Height mm (ft-in) 5 (-9) 7 (-¾) 7 (-¾) Reach in front of tracks mm (ft-in) (-) (-5½) (-5½) NOIS LVLS (95/7/ YNMI) Machine model TS TS TS TS ab external sound d (Lw) 9 9 9 9 ab internal sound d (Lp) 7 77 77 79 J Sales Limited, Rocester, Staffordshire ST 5JP. Tel: 9 59. ax: 9 595. Web: http://www.jcb.com J reserves the right to change specifications without notice. Illustrations shown may include optional equipment and accessories. The J logo is a registered trademark of J amford xcavators Ltd. 9999/5 / Issue