FEATURES Reliable, uniform, glare free illumination Types II, III, IV, V and custom distributions 1 3000K, 4000K, 5000K CCT 0-10V dimming ready Integral surge suppression Life thermal protection 13 standard powder coat finishes Upgrade Kits SPECIFICATIONS Diameter: 19 / 480mm Height: 39 / 990mm Weight: 34 lbs / 15.4 kg EPA: 1.19 IP Rating: 66 3000K and warmer CCTs with FTG or NL only ORDERING INFORMATION MODEL 1 2 3 4 5 6 7 PRMD Light Engine CCT Drive Current Finish Options Controls Mounting 1. LIGHT ENGINE T2-48LED Type II T3-48LED Type III T4-48LED Type IV T5-48LED Type V 2. COLOR TEMPERATURE 3K 3000K CCT, 70CRI 4K 4000K CCT, 70CRI 5K 5000K CCT, 70CRI Additional CCT's and 560nm monochromatic amber available by request 1 3. DRIVE CURRENT 700 700mA, 112 watts 450 450mA, 72 watts 4. FINISH Standard Color WH Arctic White BL Black BLT Matte Black DB Dark Bronze DGN Dark Green TT Titanium WDB Weathered Bronze MDB Bronze Metallic VBU Verde Blue CRT Corten MAL Matte Aluminum MG Medium Grey AGN Antique Green LG Light Grey Premium Color SHK Shamrock SPP Salt and Pepper SFM Seafoam WCP Weathered Copper RAL RAL 4 digit Color CUSTOM Custom Color 5. OPTIONS ing VSR 30 /762mm diameter visor HSS shield for Type 4, not for use with FTG Lens May choose one LDL Lightly diffused drop lens FTG Flat glass lens in place of standard acrylic drop lens, not for use with HSS NL No standard acrylic drop lens, optical bezel finish to match housing 6. CONTROLS May choose one PCA-C photocell adapter, requires mounting that slips over a 4 / DIA. pole EPA-C Egress adapter, requires mounting that slips over a 4 / DIA. pole SCP Sensor Control Programmable SCP (Sensor Control Programmable) pole accessory is available to provide occupancy detection for outdoor applications meeting California Title 24. For complete spec sheet and ordering information, visit www.aal.net/ products/sensor_control_programmable/ 7. MOUNTING (Choose one) POLE MOUNT Bolts to a 4 / DIA. or 5 /125mm DIA. pole TRA2M TRA2L TRA5D TRA6D SLA8D SLA22D SLA3 (/ DIA. poles only) Slips over a 4 / DIA. pole or tenon TRA4 TRA4-2 TRA7 TRA7-2 TRA8 TRA8-2 TRA9 TRA9-2 SLA4 SLA4-2 SLA9 SLA9-2 SLA10 SLA10-2 SLA16 SLA16-2 SLA18 SLA18-2 Slips over a 4 / DIA. Or 5 /125mm DIA. pole or tenon SLA7 SLA7-2 SLA17 SLA17-2 WALL MOUNT WMA2M WMA2L WMA35D WMA36D WMA37 WMA38 WMA39 WMA4 WMA6 WMA8 WMA9D WMA10 WMA11 WMA12 WMA16 WMA17 WMA18 WMA22D OTHER MOUNTING MAT Cast adapter to side mount to a 2 3/8 61mm DIA.mast arm PMS Pendant mount with 48 1220 stem, canopy and swivel PMC Pendant mount with 48 /1220mm of brass chain in fixture finish 1 Consult factory 1
LUMINAIRE PERFORMANCE Ordering Code 3K 4K 5K Optical Secondary System Lens or Distribution Light Engine Bug Bug Delivered Efficacy Rating Delivered Efficacy Rating Delivered Efficacy Bug Rating Lumens (lm/w) Lumens (lm/w) Lumens (lm/w) B U G B U G B U G 2 T2-48LED -NL 6478 58 2 0 2 8090 72 2 0 2 9137 82 2 0 2 No Lens 3 T3-48LED -NL 6543 59 2 0 2 8171 73 2 0 2 9228 83 2 0 2 4 T4-48LED -NL 6318 57 1 0 2 7890 71 1 0 2 8911 80 1 0 2 5 T5-48LED -NL 6738 60 3 0 1 8415 75 3 0 2 9503 85 3 0 2 4 T4-48LED- -HSS-NL 4697 42 0 0 2 5865 53 0 0 2 6624 59 0 0 2 2 T2-48LED 6111 55 2 0 2 7495 67 2 0 2 8464 76 2 0 2 3 T3-48LED 6128 55 2 0 2 7516 67 2 0 2 8489 76 2 0 2 Drop Lens (Standard) 4 T4-48LED 6019 54 1 0 2 7382 66 1 0 2 8337 75 1 0 2 MicroCore Flat Lens Diffuse Lens No Lens Drop Lens (Standard) Flat Lens Diffuse Lens 5 T5-48LED 6317 57 3 0 2 7748 69 3 0 2 8750 78 3 0 2 4 T4-48LED- -HSS 4385 39 1 0 2 5378 48 1 0 2 6074 54 1 0 2 2 T2-48LED -FTG 5714 51 1 0 1 7185 64 2 0 2 8060 72 2 0 2 3 T3-48LED -FTG 5703 51 2 0 2 7170 64 2 0 2 8043 72 2 0 2 4 T4-48LED -FTG 5623 50 1 0 2 7069 63 1 0 2 7930 71 1 0 2 5 T5-48LED -FTG 5879 53 3 0 1 7391 66 3 0 1 8291 74 3 0 1 4 T4-48LED- -HSS-FTG 3524 32 0 0 1 4431 40 0 0 2 4972 45 0 0 2 2 T2-48LED -LDL 5409 48 2 3 3 6750 60 2 3 3 7442 67 2 4 3 3 T3-48LED -LDL 5448 49 2 3 3 6798 61 2 3 3 7494 67 2 4 3 4 T4-48LED -LDL 5257 47 1 3 3 6558 59 1 3 3 7231 65 1 4 4 5 T5-48LED -LDL 5749 51 2 3 3 7172 64 3 4 3 7908 71 3 4 3 4 T4-48LED- -HSS-LDL 3873 35 1 3 3 4832 43 1 3 3 5328 48 1 3 3 2 T2-48LED -NL 4146 58 1 0 1 5178 72 1 0 2 5848 82 2 0 2 3 T3-48LED -NL 4187 59 1 0 1 5230 73 1 0 2 5906 83 2 0 2 4 T4-48LED -NL 4044 57 1 0 1 5050 71 1 0 2 5703 80 1 0 2 5 T5-48LED -NL 4312 60 2 0 1 5385 75 3 0 1 6082 85 3 0 1 4 T4-48LED- -HSS-NL 3006 42 0 0 1 3754 52 0 0 2 4239 59 0 0 2 2 T2-48LED 3911 55 1 0 1 4797 67 2 0 2 5417 76 2 0 2 3 T3-48LED 3922 55 1 0 2 4810 67 2 0 2 5433 76 2 0 2 4 T4-48LED 3852 54 1 0 1 4724 66 1 0 2 5336 75 1 0 2 5 T5-48LED 4043 57 2 0 1 4959 69 3 0 2 5600 78 3 0 2 4 T4-48LED- -HSS 2806 39 0 0 1 3442 48 0 0 1 3887 54 0 0 2 2 T2-48LED -FTG 3657 51 1 0 1 4598 64 1 0 1 5158 72 1 0 1 3 T3-48LED -FTG 3650 51 1 0 1 4589 64 1 0 1 5148 72 1 0 1 4 T4-48LED -FTG 3600 50 1 0 1 4525 63 1 0 1 5076 71 1 0 1 5 T5-48LED -FTG 3762 53 2 0 1 4730 66 2 0 1 5306 74 3 0 1 4 T4-48LED- -HSS-FTG 2256 32 0 0 1 2836 40 0 0 1 3182 44 0 0 1 2 T2-48LED -LDL 3462 48 1 3 2 4320 60 1 3 3 4763 67 1 3 3 3 T3-48LED -LDL 3487 49 1 3 3 4351 61 1 3 3 4796 67 1 3 3 4 T4-48LED -LDL 3364 47 1 3 3 4197 59 1 3 3 4268 60 1 3 3 5 T5-48LED -LDL 3680 51 2 3 2 4590 64 2 3 2 5061 71 2 3 3 4 T4-48LED- -HSS-LDL 2479 35 0 3 2 3093 43 1 3 3 3410 48 1 3 3 Drive Current (ma) System Watts 700 112 450 72 2
ELECTRICAL CHARACTERISTICS Optical System Ordering Code LED Drive ma System Watts Driver Line Voltage Amps AC Min. Power VAC HZ 120 277 Factor Max THD (%) Operating Temp. Range Dimming Range Dimming Source current out of Absolute voltage range on 0-10V purple wire 0-10V (+) purple wire Min Typical Max Min Typical Max MicroCore 48LED 700 700 112 120-277 50/60 0.93 0.4 450 450 72 0.6 0.26.9 20-30 C TO +40 C 10% to 100% 0 MA - 8 ma -2.0 V - +15 V LED COLOR Ordering Code 3K 4K 5K CCT Average 3000K 4000K 5000K CRI Minimum 70 70 70 TM-21 LIFETIME CALCULATION Optical System Ordering Code Ambient Environment C Projected Lumen Maintenance (% vs. Khrs) 15 25 50 60 100 15 98 98 97 97 95 MicroCore 48LED 25 98 98 97 96 94 40 98 97 95 94 92 Reported L70 >60Khrs 3
SPECIFICATIONS HOUSING Luminaire housing and lens frame shall be cast aluminum, A356 alloy and sealed with continuous extruded silicone rubber gaskets. Outer globe lens shall be one piece clear, injection molded optical grade DR acrylic and sealed to the lens frame with a continuous extruded silicone rubber gasket. Concealed tool less latch mechanisms shall be stainless steel. All internal and external hardware shall be stainless steel or aluminum. Optical bezel shall be painted white. OPTICAL Patent pending MicroCore LED modules shall independently aim each light emitting diode (LED) in both horizontal rotation and vertical tilt angle. LEDs shall be mounted to a metal printed circuit board assembly (PCBA) with a uniform conformal coating over the panel surface and electrical features. LED optics shall be clear injection molded PMMA acrylic. MicroCore PCBA and optic shall be sealed to a die-cast anodized aluminum heat sink with an injection molded silicone rubber gasket. IP66. Type 4 distribution with optional not available with clear or diffused glass lenses. Factory installed is optimized for Type 4 distribution and not recommended for use with Type 2 or 3 distribution and not available with type 5 distribution. CONTROLS SCP shall have an integral surge protection device with a currentt rating of 10,000 Amps using the industry standard 8/20uSec wave and sure rating of 372J Sensor not intended for use with additional photo-control, wireless control or dimming systems. PHOTOCELL / EGRESS ADAPTERS Adapter(s) shall slip over a / DIA. pole with the luminaire or arm slipping over the adapter to add a total of 4.5 /114mm to the overall height. Adapter(s) shall be prewired, independently rotatable 359, and have a cast access cover with an integral lens and lanyard. Photocell adapter shall include an internal twist lock receptacle. Photocell by others. Egress adapter shall require an auxiliary 120 volt supply for operation of an integral MR16 lamp in the event of emergency. The lamp may be aimed and locked into position with an adjustment range of 15-45. Adapter shall have a socket that accepts miniature bi-pin MR16 lamps up to 50 watts, lamp by others. SERVICING Electrical assembly shall be mounted to a prewired internal service tray and accessed by releasing two concealed tool less latches. CERTIFICATION Luminaire shall be listed with ETL for outdoor, wet location use, UL1598, UL 8750 and Canadian CSA Std. C22.2 no.250. WARRANTY / TERMS AND CONDITIONS OF SALE Download: http://www.hubbelllighting.com/resources/ warranty/ ELECTRICAL Luminaires shall have integral surge protection that shall be U.L. recognized and have a surge current rating of 10,000 Amps using the industry standard 8/20uSec wave and surge rating of 372J. Drivers shall be U.L recognized with an inrush current maximum of <20.0 Amps maximum at 230VAC. Drivers shall not be compatible with current sourcing dimmers, consult factory for current list of known compatible dimming systems, approved dimmers include Lutron Diva AVTV, Lutron Nova NFTV and NTFTV. Life shall be provided with all configurations for added protection in the event of abnormally excessive high ambient temperature conditions. ARM AND POLE MOUNTING Standard post top configurations shall slip over a 4 / O.D. pole and be secured to the pole with three stainless steel set screws Arm or wall mount configurations shall have the bracket welded to luminaire. Visit www.aal.net for Arm, Poles & Accessories Specification Guide. FINISH Luminaire finish shall consist of a five stage pretreatment regimen with a polymer primer sealer, oven dry off, and top coated with a thermoset super TGIC polyester powder coat finish. Luminaire finish shall meet the AAMA 605.2 performance specification which includes passing a 3000 hour salt spray test for corrosion resistance. 4
TRA2M WT: 7 LBS EPA:.62 TRA2L WT: 9 LBS EPA:.75 14 1/2" 363mm 17 1/ 431mm 8 2 4 1 7/1 MTG.HOLE 2-PLC 14 36 5 5/ 141mm 4 1 10 1/ 256mm 7/1 MTG.HOLE 2-PLC 17 1/2" 438mm 6 16 OR 5" POLE BACK VIEW OR 5" POLE SIDE VIEW TRA5D WT: 9 LBS EPA:.62 TRA6D WT: 9 LBS EPA:.62 9" 225mm 6 5/ 166mm 3" 75mm 7/1 MTG.HOLES 4 1/2" 113mm 18 1/ 456mm 9" 225mm 6 5/ 166mm 3" 75mm 7/1 MTG.HOLES 4 1/2" 113mm 15" 375mm 19 1/ 481mm 19 1/ 481mm OR 5" POLE OR 5" POLE SLA8D WT: 5 LBS EPA:.40 SLA22D WT: 4 LBS EPA:.44 21 1/ 528mm 20" 500mm 12" 300mm OR 5" POLE OR 5" POLE SLA3 WT: 8 LBS EPA:.77 TRA4 WT: 16 LBS EPA:.82 22" 550mm 24.0" 610 mm 24.1 in 5 1, 19.5" 495 19.5 mmin 5
TRA4-2 WT: 19 LBS EPA: 1.11 4 1 TRA7 WT: 12 LBS EPA:.90 2 600mm 5 1, 28 1/ 706mm 4 1/ 106mm TRA7-2 WT: 18 LBS EPA: 1.62 TRA8 WT: 13 LBS EPA: 1.34 2 600mm 50" 1,250mm 28 7/ 722mm 4 7/ 122mm 5 1,350mm 32" 800mm TRA8-2 WT: 21 LBS EPA: 2.68 50" 1,250mm TRA9 WT: 17 LBS EPA: 1.90 27 694mm 56 1/ 1,406mm 32 1/ 806mm 46 1/2" 1,163mm 24 1/ 606mm TRA9-2 WT: 25 LBS EPA: 2.72 5 1,388mm SLA4 WT: 14 LBS EPA: 1.39 27 694mm 46 1/2" 1,163mm 24 1/ 606mm 47" 1,175mm 24 6 6
SLA4-2 WT: 26 LBS EPA: 2.10 5 1,388mm SLA9 WT: 18 LBS EPA: 1.90 2 47" 1,175mm 24 6 4 1, 25" 625mm SLA9-2 WT: 24 LBS EPA: 2.44 52" 1,300mm SLA10 WT: 9 LBS EPA: 1.09 23" 575mm 4 1, 30" 750mm 31" 775mm 10" 250mm SLA10-2 WT: 16 LBS EPA: 1.47 4 1, SLA16 WT: 18 LBS EPA: 2.88 30 1/ 756mm 30" 750mm 41 1,044mm SLA16-2 WT: 28 LBS EPA: 4.38 SLA18 WT: 12 LBS EPA:.85 60 1/2" 1,512mm 30" 750mm 41 1,044mm 2 700mm 7
SLA18-2 WT: 22 LBS EPA: 1.59 SLA7 WT: 9 LBS EPA: 1.34 62" 1,550mm 2 700mm 5 1,350mm 32" 800mm SLA7-2 WT: 16 LBS EPA: 2.34 SLA17 WT: 18 LBS EPA: 1.50 50" 1,250mm 2 56 1/ 1,406mm 34 1/ 856mm 40" 1,000mm SLA17-2 WT: 24 LBS EPA: 2.05 WMA2M WT: 12 LBS 52" 1,300mm 15 394mm 40" 1,000mm 1 7/1 11" 275mm Note: Back plate is welded to the arm. WMA2L WT: 14 LBS 18 1/2" 463mm WMA35D WT: 12 LBS 20" 500mm 1 7/1 10 26 1 350mm 6 5/ 166mm 7" 175mm 7/1 13 1/2" 338mm Note: Back plate is welded to the arm. Note: Back plate is welded to the arm. 8
WMA36D WT: 12 LBS WMA37 WT: 12 LBS 1 350mm 6 5/ 166mm 7" 175mm 7/1 Note: Back plate is welded to the arm. 20" 500mm 1 7/1 26 1/ 656mm 21" 525mm WMA38 WT: 12 LBS WMA39 WT: 14 LBS 26 1/ 656mm 2 23" 575mm 5" 125mm 18mm 30" 750mm 1 7/1 39" 975mm 21" 525mm WMA4 WT: 12 LBS WMA6 WT: 14 LBS 22" 550mm 1 5 144mm 22 56 10 26 9 244mm 1 7/1 9 1/ 228mm 26 1/2" 663mm WMA8 WT: 10 LBS WMA9D WT: 6 LBS 20 1/ 506mm 1 12" 300mm 10" 250mm 11 7/ 297mm 24 1/2" 613mm 3 1/2" 88mm 7" 175mm 3" 75mm 9
WMA10 WT: 16 LBS WMA11 WT: 10 LBS 1 5 144mm 22" 550mm 2 23" 575mm 3" 75mm 5" 125mm 25" 625mm 32 1/ 806mm 4 1, WMA12 WT: 12 LBS WMA16 WT: 22 LBS 2 2 700mm 12" 300mm 10" 250mm 1 1/2" 37.5mm 23" 575mm 39" 975mm 4 1, 3 950mm 9" 225mm WMA17 WT: 15 LBS WMA18 WT: 18 LBS 3 900mm 3 850mm 1 43.75 5 1/ 128mm 25" 625mm 2 1/ 53mm 2 23" 575mm 5" 125mm 25" 625mm 3" 75mm WMA22D WT: 4 LBS 5 1/ 131mm 1 388mm 8 1/2" 213mm 2-PLC 10