We are a leading Manufacturer of Innovative Maintenance-free Auto Components. We are an ISO 9001:2008 Quality Management System Certified Firm, with an objective of meeting growing demand of Quality Spares worldwide, for the requirements of Off- Highway / Earthmoving Equipments in Mining sectors and for Diesel Locomotives. Our Manufactured Products are Trade Mark Registered as PTC. The Performance and Quality of PTC products are widely accepted by OEMs and end users. With over 35 years of R&D Experience in the field of Power Train Systems and Components, Mr.V.Chandramohan,C.E.O. contributes his major strength in bringing a wide range of Innovative Self Lubricated (Maintenance free) C type Universal Joints and Drive Shafts / Cardan Shafts of varied lengths. The Universal Joints are user - friendly, designed for Sealed and Self Locked Bearing cups to arrive at Maintenance - free operation. Exporting countries Vietnam, Thailand, Italy, Germany, Kazakhstan, Dubai, Argentina Etc., Product Quality We are well equipped with Quality Control / Testing facilities and skilled workforce. The raw materials used are made of High Quality Alloy Steel Forgings, processed at World Quality Standards, for Product Reliability. Stringent Quality measures are adopted for zero defects. Drive Shafts are dynamically balanced as per Balance Grade G16 ISO 1940. Our products are OEM Test Certified. Advantages of PTC Products Self Lubricated Universal Joints Maintenance -free products No downtime of Equipment for Re-Lubrication Great advantage to end users & user friendly Sealed Bearings Retains Life time Grease and fully prevents entry of mud/ dust / water into Bearings Longer Service Life Self Locked Bearing cups No weld strips used to hold opposite cups No chance of detachment of cups in transit High Tensile Fasteners Scope of supply includes all the necessary high Tensile Fasteners for both Inboard & Outboard mountings.
Some of HEMM Applications of PTC Universal Joints & Propeller Shafts SI.No Equipment Model Universal Joint Part no. Propeller shaft Part no. 1 Komatsu 35T Dump HD 325-6, 7R Drive Shaft Front 569-20-61100/569-20-61109 566-20-71000 HD 325-6, 7R Drive Shaft Rear 569-20-62100 566-20-11005 2 Komatsu 35T Articulated Dump HM 400-2R Engine to Front Diff. 56B-20-11910 56B-20-11900 HM 400-2R Front Diff. to Wheels 56B-20-12910 56B-20-12902 HM 400-2R Tran. to Hitch Frame 56B-20-13910 56B-20-13900 HM 400-2R Hitch Frame to mid Axle 56B-20-13910 56B-20-14900 HM 400-2R Mid Axle to Rear Axle 56B-20-15910 56B-20-15900 3 Komatsu 60T Dump HD 465-7, 7R, 7EO - Front 421-20-32621 569-20-71000 HD 465-7, 7R, 7EO - Rear 428-20-12620 569-20-72000 4 Komatsu 85T Dump HD 785-2 Front 562-20-11100/281-20-12201 562-20-11003 HD 785-2 Rear 561-20-12102 561-20-12003 5 Komatsu 90T Dump HD 785-5 Front 561-20-61100 561-20-61000 HD 785-5 Rear 561-20-62100 561-20-62000 6 Komatsu 100T Dump HD 785-7 Front 561-20-71100 561-20-71000 HD 785-7 Rear 42C-20-12621 561-20-72002 7 Komatsu / BEML Dozers D155 175-20-00060 175-20-00050/125-UJ-02016 D355 195-20-11100/421-20-12620 195-20-00011/195-20-11001 D475 135-UJ-03018 135-UJ-02005 D50 131-10-46110 As Required D65E-8 145-14-00190 144-15-00030 8 Komatsu Wheel LoaderWA450-6 9 Komatsu Wheel Loader WA470-5 10 Komatsu Wheel Loader WA470-6 11 Komatsu Wheel Loader WA480-5 12 Komatsu Wheel Loader WA480-6 13 Komatsu Wheel Loader WA500-3 14 Komatsu Wheel Loader WA600-6R 15 Komatsu Wheel Loader WA700-1 16 Komatsu Wheel Loader WA700-3 Front Intermediate, 421-20-32621 421-20-32112 Front 421-20-32621 Rear 421-20-33621 421-20-34511 Front Intermediate, 421-20-32621 421-20-32111 Rear 421-20-33621 421-20-34511 Front Intermediate, 421-20-32621 421-20-32711 Rear 421-20-33621 421-20-34530 Front Intermediate, 421-20-32621 421-20-32111 Rear 421-20-33621 421-20-34521 Front Intermediate, 421-20-32621 421-20-32111/421-20-32112 Rear 421-20-33621 421-20-34521 Engine to Trans 425-20-11620 425-20-11111 Front Intermediate 421-20-12620 425-20-22111 Front 421-20-12620 425-20-23111 Rear 421-20-12620 425-20-24111 Engine to Trans 426-20-31620/ 426-20-31121/426-20-31120 Front Intermediate, 425-20-32610/56B-20-11910 426-20-32111 Front 426-20-32620 426-20-33112/426-20-33111 Rear 426-20-32620/56B-20-13910 426-20-34121/426-20-34120 Center 428-20-12620 428-20-12111 Front 428-20-12620 428-20-13110 Rear 428-20-12620 428-20-14110 Engine to Trans 427-20-12520 428-20-11211 Front Intermediate, 428-20-12620 428-20-12111 Front 428-20-12620 428-20-13110 Rear 428-20-12620 428-20-14110
SI.No Equipment Model Universal Joint Part no. Propeller shaft Part no. 17 Komatsu Wheel Loader Center & Rear 42C-20-12621 427-20-12211 WA800-3 Front 42C-20-12621 42C-20-12222 18 Komatsu Wheel Loader WA900-3 Center & Rear 42C-20-12621 427-20-12112 Front 42C-20-12621 427-20-13111 19 Komatsu Wheel Loader Center 427-20-12620 42C-20-12120 WA1200-3 (#50001/#50018) Front 427-20-12620 42C-20-13112/42C-20-13211 Rear 427-20-12620 42C-20-14113/42C-20-14211 20 Komatsu Wheel Loader Center 42C-20-12621 42C-20-12222 WA1200-3 (#50019) Front 42C-20-12621 42C-20-123212 Rear 42C-20-12621 42C-20-14212 21 CAT 773 50T/60T Dump Main Drive 9V7710 / 8W9912 /173-0889 / 8P8132/172-7634 / 81019082 9D3520 / 2G4080 /8X8291 / 8W9908 / 81403322 22 CAT 777 85T/100T Dump Main Drive 1060933/8P8132/2G4157/ 8W9435/2G3130/1422886/ 172-5235 172-5232/171-4696/2G4080 23 CAT 785 120T Dump Main Drive 8X0432 8X0498/8X0473 24 CAT Dozer WD834/D11 Main Drive 1060933/6V1540 As Required CAT Dozer D10R/D11R Main Drive 1730888 As Required 25 BEML BH35 /LW35 Dump Trans to Differential TV1499/VJ4057/566201020000 VL0525/ 566201000000 BEML BH35-2 Dump Trans to Differential 787-PI-03081/787-PI-03147 / 787-PI-02109/955-EI-03074 566201020000 787-PI-02174 26 BEML 40T Dump Engine to Transmission 778PI02053 778PI01089 Trans to Differential 778PI02078 778PI01098 27 BEML 210M 50T Dump Engine to Transmission VE8331/955-EI-03082 PB8131/955-EI-02086/02159 BEML 210M 50T Dump Trans to Differential VE8333 PB7786 BEML H50 50T Dump H50 TV1499 VL6882 28 BEML BH50M /BH60 Dump 29 BEML BH85 / 785-2 Dump Engine to Transmission 955EI03082 / 566-20-1020000 955-EI-02159/955-EI-02086 Trans to Differential 955EI03033/955EI03058 955-EI-02053/955-EI-02142 Trans to Differential 955EI03017 955-EI-02101 Engine to Transmission 985-UJ-03016/562-20-11100 562-20-11003 Trans to Differential 568-20-12103/561-20-12102 985-PZ-02005/561-20-12003 30 BEML BH100 Dump Engine to Transmission 953-PI-11027 953-PI-01007 Trans to Differential 933-PI-11043 953-PI-01015 31 BEML Motor Grader BG825 452-PZ-02029 235-20-11100/452-PZ-02004 32 BEML Wheel Loader BL200 375-PZ-04022/3462010 As Required 33 HM 35T Dump 1035-Front 81019082/81805356 81021704 1035-Rear 81019082/81805356 81021705 (For CLBT 754 Trans) 1035 Rear 81019082/81805356 81045094 (For CLT 754 Trans) 34 HM / Terex Loader 2021 / 72-21B Trans output to Differential 81804335/9033903/9033904 As Required 35 Diesel Locomotives W12 Series 460-02-030/033/0450035 As Required SAN / VENTRA /HITACHI W18 Series 460-02-010/014/012/0450034 As Required W38 Series 460-02-020/0450046 As Required 36 LHD (U.G Equipments) CTX4BEA 5030263 As Required ST-2D / LPDT 5535542400/5535437300 As Required 811 811M100000417 As Required
Product Range Universal Joints PTC C type Universal Joints are conforming to International Standards to ensure Fitment, for the Joints sizes 5C,6C,7C,8C, 8.5C, 9C, 9.5C, 10C, 10.5C, 11C, 12C, 14C, 15C, W12, W18 and W38. Joint Size A Hole Pitch B Hole Pitch C Pilot Dia D Swing Dia E Key Width F Key Height G Brg. Height H Hole Dia Application : OFF HIGHWAY VEHICLES 5C 88.90 42.90 115.06 123.20 14.26 4.10 17.40 10.50 6C 114.30 42.90 140.46 148.60 14.26 4.10 17.40 10.50 7C 117.48 49.20 148.38 158.00 15.85 5.10 20.60 13.50 8C 174.60 49.20 206.32 216.00 15.85 5.10 20.60 13.50 8.5C 123.83 71.44 165.10 175.00 15.85 5.20 25.40 13.50 9C / 9.5C 168.25 71.44 209.52 219.00 15.85 5.20 25.40/28.40 13.50 10C 165.10 92.10 212.70 225.00 25.37 8.30 32.58 15.00/17.00 10.5C 172.72 88.90 222.17 231.60 25.37 8.30 34.00 17.00 11C 172.72 88.90 222.17 231.60 25.37 8.30 34.00 21.00 12C 241.35 92.10 288.90 301.00 25.37 8.30 32.58 15.00 14C 270.00 134.88 338.80 360.00 28.60 12.00 49.00 19.00 15C 199.94 99.98 259.58 273.00 31.73 12.00 38.00 21.00 Application : LOCOMOTIVES W12 168.25 71.44 209.52 219.00 15.85 5.20 28.40 13.50 W18 172.70 88.90 222.17 225.00 25.35 8.50 34.00 17.00 W38 205.00 104.00 272.90 281.90 31.73 8.60 41.00 25.00
Drive Shafts PTC C type Universal Joints are conforming to International Standards to ensure Fitment, for the JoiPTC C type Drive Shafts are tailor made to suit individual customer needs. RETROFIT KITS for Round Flanged Drive Shafts are also available with C type Drive Shafts using End Adaptors Types of Drive Shafts WITH END ADAPTORS WITH SLIP NON SLIP WITH CENTER PLATE List of Major Clients PTC DRIVELINES TEL : +91-44-22501838 A SUPER 19 & 20, GUINDY INDUSTRIAL ESTATE, (NEAR LABOUR COLONY)GUINDY, CHENNAI - 600032 ( T.N.) INDIA. WEB : www.ptcdrivelines.com FAX : +91-44-22501837 (Mb) : +91-94440 83462 E MAIL: ptcdrivelines@gmail.com sales@ptcdrivelines.com