Hattersley Newman Hender Ltd

Product Guide

Quality Valves from Hattersley WHEN IT REALLY COUNTS, YOU CAN DEPEND ON HATTERSLEY Hattersley Newman Hender is one of the world s premier manufacturers of cast iron, ductile iron and copper alloy valves. Founded in England by Dick Hattersley over 100 years ago, the Hattersley brand has become synonymous with quality, reliability and service to the very highest standards. Today, Hattersley is in a unique position to offer its customers the benefit of unparalleled industrial and commercial experience, combined with impressive design innovation and manufacturing excellence, to deliver the best components money can buy. Our comprehensive product range reflects the extent of our involvement with critical projects in some of the most hostile environments in the world. And if the breadth of our range isn't enough to inspire confidence, then the depth of our expertise will! Knowledgeable in all relevant industry sectors - including heating & ventilating, mining, chemicals, textiles, drugs, waste treatment and power generation - Hattersley can provide a skillfully - engineered solution for every application.

Figure C950 - Cast Iron Butterfly Valve Wafer pattern - EPDM liner Size Range: 50 to 600mm Complies with BS5155 and BS EN 59 Figure C4970 - Ductile Iron Butterfly Valve Fully lugged wafer pattern EPDM liner Size Range: 50 to 600mm Complies with BS5155 and BS EN 59 Figure C71 - Cast Iron Globe Valve Size Range: 50 to 50mm Complies with BS5152 Figure 850 & 851 - Cast Iron Check Valve Wafer Pattern Size Range: 50 to 600mm Figure M77 - Cast Iron Variable Orifice Double Regulating Valves Size Range: 50 to 200mm Figure 7 Cast Iron Double Regulating Valves Rating:PN16 Class 125 Size Range: DN50 - DN200 Kitemarked to BS750 Figure 2000 Stainless Steel Metering Stations Size Range: 50-200mm Kitemarked to BS750 Figure 1710 - DZR Variable Orifice Double Regulating Valve Rating: PN20 Series B Size Range: 1 2 to 2in Kitemarked to BS750 Figure 1711 DZR Double Regulating Valve Rating: PN20 Size Range: 1 2 to 2in Kitemarked to BS750 Figure 1000 Bronze Metering Station Rating: PN20 Series B (Threaded) PN16 (Compression) Size Range: 1 2 to 2in Kitemarked to BS750 Figure 807/907 Bronze Y-Strainer Rating: PN2 Series B Size Range: 1 2 to 2in Figure 11 Bronze Ball Valve Rating: PN40 Size Range: 1 2 to 2in Figure 761 & 2761 - Aquacheck Non Return Valve Size Range: 50 to 50mm Figure 589 Cast Iron Resilient Seated Gate Size Range: 50 to 00mm Complies with BS516 5

COMPASS TM RANGE BRONZE GATE VALVE PN20 SERIES B FIG C2 9 bar at 180 C 20 bar from -10 to 100 C Each valve is individually hydrostatically tested to BS5154 at the following test pressures. Shell: 0 bar Seat: 22 bar Non-rising stem Threaded bonnet One piece wedge Bronze trim BS21 Taper thread (ISO 7) Complies with BS 5154 Available with NPT thread (C2AT) Figure C2AT complies with MSS SP-80 Class 150 Materials Handwheel Iron 1561 EN-JL100 A126 CI B Stem Copper Alloy 12164 CW60N B21-C48200 Gland Nut Copper Alloy 12164 CW60N B16-C6000 Gland Copper Alloy 12164 CW60N B16-C6000 Gland Packing PTFE Stem Nut Copper Alloy 12164 CW60N B16-C6000 Bonnet Bronze 1982 CC491K B62-C8600 Body Bronze 1982 CC491K B62-C8600 Wedge Bronze 1982 CC491K B62-C8600 Nominal Size in 1 2 4 1 1 1 4 1 1 2 2 A mm 48 52 59 6 67 74 B mm 78 94 109 120 142 16 C mm 5 64 69 80 89 102 Weight kg 0. 0.5 0.7 1.0 1. 1.9 7

COMPASS TM RANGE BRONZE GLOBE VALVE PN16 SERIES B FIG C4 7 bar at 170 C 16 bar from -10 to 100 C Each valve is individually hydrostatically tested to BS5154 at the following test pressures. Shell: 24 bar Seat: 17.6 bar Rising stem Threaded bonnet Metal Disk BS21 Taper thread (ISO 7) Available with NPT thread (C2AT) subject to minimum quantities Materials Handwheel Cast Iron 1561 EN-JL100 A126 CI B Stem Brass 12164 CW614N B455-85 Gland Nut Brass 12164 CW614N B455-85 Gland Follower Brass 12164 CW614N B455-85 Gland Packing PTFE Bonnet Bronze 1982 CC490K B62 C84400 Disk Bronze 1982 CC490K B62 C84400 Body Bronze 1982 CC490K B62 C84400 Nominal Size in 1 4 8 1 2 4 1 1 1 4 1 1 2 2 A mm 4 46 49 56 65 75 84 99 B mm 80 81 86 96 114 126 16 16 C mm 48 48 48 55 62 7 7 88 Weight kg 0.25 0.25 0.26 0.5 0.55 0.72 1.01 1.54 9

COMPASS TM RANGE BRONZE CHECK VALVE - SWING PATTERN PN20 SERIES B FIG C47 9 bar at 180 C 20 bar from -10 to 100 C Each valve is individually hydrostatically tested to BS5154 at the following test pressures. Shell: 0 bar Seat: 22 bar Horizontal swing pattern Threaded cover Metal to metal seat Bronze trim BS21 Taper thread (ISO 7) Available with NPT thread (C47AT) Figure C47 complies with BS5154 Figure C47AT complies with MSS SP-80 Class125 Suitable for mounting in horizontal and vertical pipe (with vertical flow upwards) Materials Cap Bronze 1982 CC491K B62-C8600 Hinge Pin Copper Alloy 12164 CW60N B16-C6000 Hinge Bronze 1982 CC491K B62-C8600 Hinge Pin Plug Copper Alloy 12164 CW60N B16-C6000 Disk Bronze 1982 CC491K B62-C8600 Disk Nut Copper Alloy 12164 CW60N B16-C6000 Body Bronze 1982 CC491K B62-C8600 Nominal Size in 1 2 4 1 1 1 4 1 1 2 2 A mm 66 70 8 96 108 128 B mm 45 49 58 65 7 89 Weight kg 0.4 0.41 0.66 0.97 1.7 2.17 11

COMPASS TM RANGE CAST IRON GATE VALVE PN16 FIG C541 8.4 bar at 200 C 16 bar from -10 to 120 C Each valve is individually hydrostatically tested to BS6755 Part 1 at the following test pressures. Shell: 24 bar Seat: 17.6 bar Inside screw Non-rising stem Complies with BS5150 Flanged to BS EN 1092-2 PN16 Face to face dimension to BS EN 558-1 Other flange types available, specify on order Materials Body Cast Iron 1561 EN-JL100 A126 CI B Body Seat Ring Bronze 1982 CC491K B62-C8600 Wedge Cast Iron 1561 EN-JL100 A126 CI B Wedge Ring Bronze 1982 CC491K B62 C8600 Wedge Nut Bronze 1982 CC491K B62-C8600 Bonnet Cast Iron 1561 EN-JL100 A126 CI B Bonnet Gasket Graphite Stem Copper Alloy 12164 CW60N B16-C6000 Stuffing Box Cast Iron 1561 EN-JL100 A126 CI B Stuffing Box Gasket Graphite Gland Cast Iron 1561 EN-JL100 A126 CI B Gland Packing Graphite Handwheel Cast Iron 1561 EN-JL100 A126 CI B Nominal Size mm 50 65 80 100 125 150 200 250 00 L mm 178 190 20 229 254 267 292 0 56 H mm 250 275 00 55 410 468 555 660 800 D (PN16) mm 165 185 200 25 270 00 60 425 485 D (ANSI) in 6 7 7 1 2 9 10 11 1 1 2 16 19 D0 mm 170 170 195 20 250 295 50 400 400 1

COMPASS TM RANGE CAST IRON GATE VALVE ANSI 125 FIG C504 9 bar at 220 C 1.8 bar from -10 to 65 C Each valve is individually hydrostatically tested to MSS SP-70 at the following test pressures. Shell: 24.1 bar Seat: 15.2 bar Outside screw Rising stem Flanged to ANSI B16.1 Class 125 Bronze trim Complies with MSS SP-70 Class 125 Materials Handwheel Cast Iron 1561 EN-JL100 A126 CI B Gland Cast Iron 1561 EN-JL100 A126 CI B Gland Packing Graphite Stuffing Box Cast Iron 1561 EN-JL100 A126 CI B Stuffing Box Gasket Graphite Stem Copper Alloy 12164 CW60N B16-C6000 Bonnet Cast Iron 1561 EN-JL100 A126 CI B Bonnet Gasket Graphite Wedge Nut Bronze 1982 CC491K B62-C8600 Wedge Cast Iron 1561 EN-JL100 A126 CI B Wedge Facing Ring Bronze 1982 CC491K B62-C8600 Body Seat Ring Bronze 1982 CC491K B62-C8600 Body Cast Iron 1561 EN-JL100 A126 CI B Nominal Size mm 2 1 2 4 5 6 8 A mm 7 1 2 8 9 10 10 1 2 11 1 2 B mm 1 1 2 15 1 2 19 1 4 22 4 26 4 2 C mm 8 8 10 12 12 14 D mm 7 7 1 2 9 10 11 1 1 2 Weight kg 26 29 50 71 88 16 15

COMPASS TM RANGE CAST IRON CHECK VALVE - SWING PATTERN PN16 FIG C651 1 bar at 220 C 16 bar from -10 to 120 C Each valve is individually hydrostatically tested to BS6755 Part 1 Shell: 24 bar Seat: 17.6 bar Horizontal swing pattern Bolted cover Flanged to BS EN 1092-2 PN16 Bronze trim Suitable for mounting in horizontal and vertical pipeline (with vertical flow upwards) Complies with BS515 Face to face dimension to BS EN 558-1 Available with ANSI 125 Flanges. Complies with MSS SP-71 Materials Cover Cast Iron 1561 EN-JL100 A 126 CI B Cover Gasket Graphite Hinge Pin Stainless Steel Hinge Pin Plug HT Brass 12164 CW221R B18-675 Hinge Cast Iron 1561 EN-JL100 A126 CI B Disk Cast Iron 1561 EN-JL100 A126 CI B Disk Face Ring Bronze 1982 CC491K B62-C8600 Body Ring Bronze 1982 CC491K B62-C8600 Body Cast Iron 1561 EN-JL100 A126 CI B Nominal Size mm 65 80 100 125 150 200 A mm 216 241 292 0 56 495 B mm 146 157 182 20 27 278 D mm 185 200 220 250 285 40 Weight kg 20 25 9 59 70 127 17

COMPASS TM RANGE FULLY LUGGED WAFER TYPE BUTTERFLY VALVE PN16 FIG C4970 16 bar from -10 up to 120 C Each valve is individually hydrostatically tested to BS6755 Part 1 at the following test pressures. Shell: 24 bar Seat: 17.6 bar Conforms to BS5155 and BS EN 59 Ductile Iron body epoxy coated Fully lugged Stainless steel disk EPDM liner Valves DN250 and larger supplied as standard with fully enclosed gear operator To suit flange connections BS EN 1092-2 PN16 Valves may be used for flow regulation Materials Body Ductile Iron 156 EN-JS100 A56 65-45-12 Shaft Stainless Steel 10088-1 X5CrNiMo17-12-2 A52 Gr 16 Disk Stainless Steel 11021-4GX5CrNiMo 19-11-2 A51 CF8M Bushes (up to 100mm) PTFE 125mm and above Bronze (lubricated) O-ring EPDM Liner EPDM Nominal Size mm 50 65 80 100 125 150 200 250 00 50 400 450 500 600 A mm 4 46 45 52 56 56 61 68 78 78 87 106 12 152 E mm 80 89 95 114 127 19 175 20 242 267 01 27 61 459 F mm 18 197 20 222 25 248 282 G mm 270 270 270 270 270 270 270 H mm 279 02 14 52 78 40 478 57 622 678 764 812 918 1098 J mm 154 154 154 154 154 154 28 28 222 222 00 00 50 50 K mm 152 152 152 152 152 152 00 00 00 00 00 00 00 00 Weight Lever kg 6 6 10 12 1 29 Weight Geared kg 10 11 15 17 18 4 41 60 TBA TBA TBA TBA TBA 19

PREMIUM RANGE BRONZE Y-STRAINER PN2 SERIES B FIG 807/907 PN2 Series B 14 bar from 198 C 2 bar from -10 to 100 C Note: fig 907 restricted to 120 C (Hydraulic) Shell: 48 bar WRAS Approved Product Standard screen has 0.75mm diameter holes Screwed cap Ends threaded internal to BS21 (ISO R7) Figure 907 supplied complete with two Fig 61 test points Materials Body Gunmetal 1982 CC491K B62 Screen Stainless Steel 10088-1 X5CrNiMo 17-12-2 AISI 16 Gasket Asbestos Free (non-stick) Cap Gunmetal 1982 CC491K B62 Nominal Size in 1 2 4 1 1 1 4 1 1 2 2 A mm 68 80 95 115 10 15 B mm 68 80 107 12 145 190 C mm 49 64 89 97 116 159 E mm 65 90 115 15 165 25 k factor. 4.2.6.2..5 Weight kg 0.4 0.5 0.9 1.5 1.8. Screen Data Nominal Size in 1 2 4 1 1 1 4 1 1 2 2 Holes Dia mm 0.75 0.75 0.75 0.75 0.75 0.75 Holes/cm 2 50 50 50 50 50 50 Free Flow Area/cm 2 % 22.6 22.6 22.6 22.6 22.6 22.6 Element Area cm 2 24.6 6 68.5 107.1 14.1 255 Free Flow Area cm 2 5.5 8.1 15.5 24.2 2. 57.6 % Nominal Bore 44 284 05 05 28 284 21

Bronze Y Type Strainer PN16 Fig. 817 Pressure / Temperature Rating PN16 16 bar -10 to 170 C 24 bar hydraulic Bronze body 04 stainless steel 40 mesh screen End connections threaded to BS21 Taper (ISO R7) Pressure bar 18 16 14 12 10 8 6 4 2 0 Saturated Steam 0 40 80 120 160 200 Temperature C Material Cap Brass 12420 CW617N B124 C7700 Screen Stainless Steel BS1449 04S15 AISI 04 Body Gunmetal 1982 CC491K B62 C8600 C B D Nom Size in 1 /2 /4 1 1 1 /4 1 1 /2 2 A mm 62 68 79 11 119 16 B mm 40 48 5 64 74 94 C mm 15 18 2 27 1 6 D mm 5 66 75 90 107 10 Weight kg 0.2 0. 0.5 0.9 1.2 1.8 A D = withdrawl distance for the screen Hattersley Newman Hender Ltd 2004

PREMIUM RANGE CAST IRON VARIABLE ORIFICE DOUBLE REGULATING VALVE PN16 / ANSI 125 FIG M77 - SIZES 50 TO 200MM ANSI 125 12.1 bar from 120 C 1.8 bar from -10 to 66 C Note: The maximum temperature is determined by the EPDM elastomer coated disk (Hydraulic) Shell: 24 bar Seat: 17.6 bar Kitemarked to BS750 Inside screw, non-rising stem EPDM coated disk Backseating feature Flanged to BS EN 1092-2 PN16 and also BS5152 Appendix A (ANSI 125) Fitted with regulating disk, double regulating device and indicator, Fig. 61 test points and extensions Valves can be supplied with vapour seal Complete with lifting eye Optional insulation boxes Valves can be fitted with locking device (M77DRLD) Flow charts available D (PN16) D (ANSI) Materials Indicator Ring Polymer Indicator Polymer Gland H T Brass 12164 CW721R B18-675 Gland Packing EPDM O-Rings Stuffing Box H T Brass 12164 CW721R B18-675 Stem (50 to100mm) H T Brass 12164 CW721R B18-675 (125 to 200mm) Stainless Steel 10088-1 X5 CrNiMo17-12-2 A182 F16 Indicator Sleeve Polymer Bonnet Cast Iron 1561 EN-JL1040 A56 70-50-05 Bonnet Gasket Asbestos Free Disk Stem Nut H T Brass 12164 CW721R B18-675 Disk Cast Iron 1561 EN-JL1040 A126 CIB Disk Coating EPDM Body Cast Iron 1561 EN-JL1040 A126 CIB Extension Sleeve Gunmetal 1982 CC491K B62 Test Points Figure 61 Nominal Size mm 50 65 80 100 125 150 200 A mm 20 290 10 50 400 480 600 B mm 250 278 292 10 250 285 450 C mm 166 166 166 166 250 250 250 D (PN16) mm 165 185 200 220 250 285 40 D (ANSI) in 6 7 7 1 2 9 10 11 1 1 2 Weight kg 15 21 26 7 65 82 19 2

PREMIUM RANGE BRONZE BALL VALVE PN40 FIG 11 40 bar from -10 to 100 C 29 bar at 120 C 18 bar at 140 C Bronze body Blow-out proof stem Hard chrome plated ball Virgin PTFE seats and stem seals BS21 Taper internally threaded end connections Materials Lever Steel Stem Copper Alloy 12164 CW60N B16 C6000 Stem Seals PTFE Ball (hard chrome plated) Copper Alloy 12164 CW60N B16 C6000 Seat Rings PTFE Seat Retainer Gunmetal 1982 CC490K B584 C84400 Body Gunmetal 1982 CC490K B584 C84400 Nominal Size in 1 2 4 1 1 1 4 1 1 2 2 A mm 56 61 7 8 92 106 B mm 46 55 62 70 75 82 C mm 82 101 101 120 145 156 Weight kg 0.25 0.45 0.70 1.15 1.70 2.95 29