System Overview Quantum Motor Quantum Q1000, Q620 Handpieces Quantum Driveline
meat processing
Current System & Component Availability Q1000 Whizard Quantum Trimmer System Available Configurations Q1000 Handpiece Q1300 Handpiece Q1400 Handpiece Q1500 Handpiece Driveline 48, 60 Disconnect Available Q1000 Serrated Blade Q1300 Serrated Blade Thumb Support Micro-break Strap Q1000 Cover, no steeling device Post Handle Handle Sizes: S, M, L Grease Cups: S, M, L, Zerk Blade Wear Gauge Q620 Whizard Quantum Trimmer System Available Configurations Q620 Handpiece Q625 Handpiece Q620A Handpiece Driveline 48, 60 Disconnect Available Q620 Low Profile Blade Q625 Serrated Blade Thumb Support Micro-break Strap Q620 Poultry Cover Q625 Poultry Cover Handle Sizes: S, M, L Grease Cups: S, M, Zerk Blade Wear Gauge AutoEdge Blade Holder Q62X 210 Blade Holder Q62X
The fastest and most energy efficient trimmer motor ever Brushless DC motor Smaller size, reduced weight Increased reliability Extended life expectancy less maintenance higher speed capabilities easier installation 6500 rpm motor speed 30% faster than Ultra Drive +80% faster than UN-84 superior cutting performance blades feel sharper, longer more productivity with less steeling
The fastest and most energy efficient trimmer motor ever Advanced Torque Control allows the motor to adjust to torque load applied to trimmer smooth operation improved flexshaft life consistent cutting power Imbedded Safety Circuitry will shut down instantly when dangerous torque levels are reached. prevents lock up situations All this prevents unintended trimmer start ups and up to 60% less energy required to operate.
Tech Blurb Performance Quantum Motor has a set point of 6,500 RPM. Controller monitors the RPM, remains content as long as RPMs operate between 6,250 6,750. When 6,250 RPM reached in operation, controller adds current to Quantum motor to maintain that RPM level. Other trimmer motors are set for constant torque and heavily load the system to the detriment of component life when heavy loads are applied.
Tech Blurb Safety The Quantum Motor monitors total torque and cuts out at 150 oz. in. Shown at right. Controller also monitors differential torque, where the Speed vs. Torque curve might become out of sync shuts down after 0.25 sec.
An industry first, no-maintenance, lubed-for-life casing & flexshaft assembly the Driveline Push button coupler release Simplifies casing connection to motor Allows single hand insertion and release efficient set up on plant floor convenience while holding trimmer A lubed-for-life assembly Pre-lubed and assembled at Bettcher Flexshaft permanently installed into casing maintenance eliminated!!! Anti-rotation alignment spline Positive engagement to motor smooth operation no whipping from casing when loaded no spinning if trimmer dropped
Simplified Driver Driver assembly is reusable across multiple Drivelines Available in Standard & Non- Disconnect Fewer parts make up the assembly
The best gets better improved durability, comfort, and performance Improved frame design Streamlined, low-profile design Robust 2-pc, SS-tube construction enhanced durability in tough, large trimmer applications improved robustness in thread area Enhanced handle grip New, more resilient polymer construction Upgraded grip pattern warmth and comfort of rubber grip improved operator grip during use no material loss into food product Ambidextrous design Trimmers can be easily configured for RH or LH operators simplifies line set up to available operator eliminates the need to carry additional LH models tool-less reconfiguration
Tech Blurb Abrasion Tester Chunker
The best gets better improved durability, comfort, and performance Low profile, adjustable thumb support Streamlined, low-profile design Multi-axis adjustment custom fit to operator preference no tools or disassembly required Adjustable grease cup Promotes ambidextrous design intent tool less adjustment additional custom fit functionality Improved knob design 2-pc, mold friendly construction Wider release button makes trimmer disengagement easier
The best gets better improved durability, comfort, and performance Enhanced blade/blade housing interface Small Tool Low-profile blade design becomes standard Low-flex housing design Proper engagement and gear mesh in use extended wear life of associated parts improved performance smooth operation Large Tool Allows for positive, consistent engagement of blade to housing, and blade to pinion. Extends parts life of housing, pinion, and bearing. Reduces reliance on proper trimmer set up/housing adjustment. Provides stability in operation whether housing is set tight or loose.
The best gets better improved durability, comfort, and performance Blade/Blade Housing engagement Large Tools Q1000 Q1300
What else do we get from a new premium product family of trimming equipment Adds manufacturing barriers to competitive parts pirates Increases intellectual property protection across product line Adds true advancements in product innovation Keeps trimmer components from becoming commodities Provides a solution that is better as a whole
QUESTIONS?