ILLUSTRATED S LIST MODEL NUMBER SB-LS PRODUCT NUMBER 9 9 00-9 MFG. ID. NUMBER 9900900 009-0 -90 Rev. 0.09.09 SR
AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 0 9 0 9 0 9 (EXPLODED) 0.0.0-B
AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 -0 IMPELLER - GEARBOX ASSEMBLY 9-09 BEARING - IMPELLER PULLEY - DISCHARGE BASE 0-9 CORNER BRACKET 9-99 CLEAN OUT TOOL 0-00 TOOL CLIP 9 0 0-00 NUT /-0 0 0- SCREW /-0 X. 9- NUT /- - SCREW /- X. - IMPELLER HUB - IMPELLER SLEEVE 90 0-00 NUT /- 0- CARRIAGE BOLT 9-9 SCREW - X. 0-0 PLUG 9-0 GEARBOX COVER RH 0 - GASKET 0-0 SEAL 0 - BEARING -9 THRUST WASHER.00 0 - WORM GEAR 0 - AUGER SHAFT 9- SQUARE 0 - BEARING - THRUST WASHER 9 - IMPELLER SHAFT 0-0 ROLL PIN - THRUST WASHER - THRUST BEARING 0-9 BEARING 0 - O-RING 0 - SCREW /- X.0 - GEARBOX COVER LH NOTE: All component dimensions given in U.S. inches. inch =. mm
AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 (x) (x) 9- AUGER HOUSING 0 - SCRAPER BAR 0-0 CARRIAGE BOLT / X. - NUT / 0.0.0-C 9- AUGER ASSEMBLY LH 9- AUGER ASSEMBLY RH 0.0.0-A NOTE: All component dimensions given in U.S. inches. inch =. mm
AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 0.0.0-A 0-0 PLASTIC RETAINER - AUGER BALL BEARING 9- SCREW /- x.00 0- SCREW /-0 x. 0 0-00 NUT /-0 0..00-A 0 - SKID PLATE 0-0 CARRIAGE BOLT / X.0 - NUT / NOTE: All component dimensions given in U.S. inches. inch =. mm
AUGER HOUSING / IMPELLER ASSEMBLY SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 - DRIFT CUTTER BAR 0-0 CARRIAGE BOLT / X.0 9- PLASTIC WASHER 0 0 0-00 LOCKWASHER / - NUT / 0..00-A NOTE: All component dimensions given in U.S. inches. inch =. mm
CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 - CHUTE WELDMENT - DEFLECTOR WELDMENT - DEFLECTOR CONTROL ASSEMBLY 0- DEFLECTOR SEAL -0 KNOB BLACK - POP RIVET 0 0-0 SCREW 0- X. 9- CHUTE SNOW SHIELD 9 - SHIELD RETAINER STRAP *0 9-9 SHOULDER BOLT /-0 X. * 9-0 NUT /-0 * 0-0 CARRIAGE BOLT /- X. * - NUT /- * -0 DEFLECTOR SPRING 0-9 (SERVICE ) DEFLECTOR CONTROL - (SERVICE ) DEFLECTOR CABLE GRAY * * *0 * * 9 0.09.0-A NOTE:. ALL ITEMS INDICATED WITH AN * ARE PROVIDED IN THE BAG OF ITEMS SHIPPED LOOSE WITH PRODUCT.. ITEMS AND ARE SERVICE NUMBERS TO ALLOW PURCHASE OF INDIVIDUAL ITEMS IF NECESSARY. - SHIELD DEFLECTOR - STRAP - SCREW - X.0 - NUT - 0.09.009-A NOTE: All component dimensions given in U.S. inches. inch =. mm
CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 0..0-A - SHIELD DEFLECTOR - STRAP - SCREW - X.0 - NUT - NOTE: All component dimensions given in U.S. inches. inch =. mm
CONTROL PANEL / DISCHARGE CHUTE SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 * * * 0.09.0-A - LEVER/CABLE ROTATOR ASSEMBLY 0 0-0 SCREW 0- X. * 0- ROTATOR HEAD * - ROTATOR PIVOT BRACKET * 0- PULLEY PIVOT * - CABLE ASSEMBLY ADJUSTABLE GRAY * - CABLE ASSEMBLY HEAT SHIELD GRAY * * NOTES:. ITEMS INDICATED WITH AN * ARE LISTED AS REFERENCE FOR SERVICE S ONLY. - STEER CABLE 0 0- SCREW 0 X.0 0..00-A NOTE: All component dimensions given in U.S. inches. inch =. mm 9
HANDLES SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 0 9 9 0.0.0-C -9 CONTROL PANEL 9-0 CONTROL LEVER LH 9- CONTROL LEVER RH 90-9 TRACTION ROD ARM 90-9 IMPELLER ROD ARM - INTERLOCK ROD - SPACER 9- RETAINER 9 0 0-0 SCREW /-0 X. 0-0 KNOB BLACK - KNOB RED -99 HANDLE KNOB 9 - WASHER / 0- CARRIAGE BOLT /- X. NOTE: All component dimensions given in U.S. inches. inch =. mm 0
HANDLES SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 0 0 9 9-0 PLOW HANDLE LH -09 PLOW HANDLE RH 9 9- PANEL BRACKET LH 9 9- PANEL BRACKET RH - HEATED HANDLE GRIP 0- SCREW / X.0 0- SCREW / X.0 - NUT / 9 - WASHER 0 - POP RIVET / 0.0.0-A -0 LOWER TUBE GRAY -9 PIVOT SUPPORT - BOLT /- X.0 00 0- SCREW /- X.00 0.0.00-C NOTE: All component dimensions given in U.S. inches. inch =. mm
HANDLES SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 0 0 9 0-0 IMPELLER ROD ASSEMBLY 0-0 TRACTION ROD ASSEMBLY 0- SHIFTER ROD TOP - SHIFTER ROD BOTTOM 0- SPRING SLEEVE -9 IMPELLER SPRING 09- TRACTION SPRING 0-0 CARRIAGE BOLT /- X. 9 - NUT /- 0 9- RETAINER 0 0..00-E NOTE: All component dimensions given in U.S. inches. inch =. mm
HANDLES SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 - INTERLOCK SPRING - INTERLOCK CAM - TORSION SPRING 9- RETAINER 0 0-0 SCREW / 0 X. - INTERLOCK STOP 0.0.00-B 0.0.00-C - CONSOLE PANEL GRAY - HEADLIGHT BEZEL GRAY - HALOGEN HEADLIGHT - SHOULDER SCREW 0 X. - SCREW 0 X. -0 GRIP SWITCH 0-99 WIRE HARNESS 0-0 BULB NOTE: All component dimensions given in U.S. inches. inch =. mm
DRIVE SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 0 9 0 0 9 9 0.0.0-A_Sheet_
DRIVE SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 9 0-0 BOLT /- X.00 - NUT /- 00- FLANGE BEARING 9 0-00 NUT /- 9 9-09 RUBBER WHEEL PLATE 9- RUBBER WHEEL RING - RUBBER WHEEL HUB 0- BOLT /- X. 9 - TRUNNION BEARING ASSEMBLY 0 00 00- RETAINER 00- HEX SHAFT 00- PINION GEAR 9 9-0 AUXILIARY PLATE 9-0 SPACER PLATE 00- INTERMEDIATE GEAR 0- AUXILIARY SHAFT 0 - CONTROL ARM 0 0-9 WASHER 9 - CONTROL SHAFT ASSEMBLY 0 9-0 CLEVIS PIN 0-0 SHIFTER LEVER - PIVOT BRACKET -0 PIVOT PIN 0- SPRING -0 SHIFTER LINK 0-9 RETAINER 0 0-9 CLIP - SCREW /- x.0 9 9- REAR PLATE 0 - SHIFTER PLATE BRACKET - CLUTCH PLATE BRACKET -0 SHIFTER PLATE - CLUTCH PLATE 0 - SHOULDER BOLT /-0 X.00 9-0 NUT /-0 NOTE: All component dimensions given in U.S. inches. inch =. mm
DRIVE SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 9 0 9 0 0.0.0-A_Sheet_
DRIVE SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 9 - SPEED SELECTOR HEAD ASSEMBLY 0 0-0 SCREW 0- X. 9 - DRIVE PLATE WELDMENT 9 - HEX SHAFT - TRUNNION BEARING ASSEMBLY 00 00- RETAINER 0-0 CARRIAGE BOLT /- X. 9-09 FLANGE BEARING 9-0 SPACER 0 0- LEVER SHIFTER PLATE 0- SHIFTER SUPPORT BRACKET -9 PIN 0-9 RETAINER 0-00 CLUTCH ROD 9 0-0 BOLT /- X.00 0- DRIVE MOUNT PLATE - NUT /- 9 0-0 TRACTION PULLEY 9 9-0 WASHER 0 0 0 0-00 LOCKWASHER / 9 0- SCREW /- X.0 0- TRACTION SPRING 90-9 RETURN SPRING - BRAKE SPRING 0- BOTTOM PAN - SCREW 0- X. -0 TRACTION SPRING BRACKET NOTE: All component dimensions given in U.S. inches. inch =. mm
DRIVE SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 b b a 0.0.00-A 0 9- AXLE ASSEMBLY (assy of a,b) a 0-0 AXLE SHAFT b -0 ROLL PIN / 00- GEAR -9 THRUST WASHER 9-0 AXLE BEARING - SCREW / X. 9 0-0 BOLT / X.00 - CLIK PIN 9- SQUARE NOTE: All component dimensions given in U.S. inches. inch =. mm
DRIVE SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 0.00.0-A - - - - - - - - B&S ENGINE MODEL 0M-00-E 9-0 FRAME 0-0 BOLT /- - SCREW /- X.0-0 ENGINE MOUNTING PLATE 0.0.00-A 0 9- COVER ASSEMBLY 9 0-0 SCREW /-0 X.0 0..0-A NOTE: All component dimensions given in U.S. inches. inch =. mm 9
CHASSIS / ENGINE / PULLEYS SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 0 0 9 0 9 0..00-A 0 0-0 IMPELLER BELT 9- TRACTION BELT 9- IDLER ARM BRACKET 0- IDLER PULLEY -9 NUT /- 0- SCREW /- X.0 9-0 IDLER BRACKET - SCREW /- X. 9-9 SHOULDER BOLT /- X.00 0 9- NUT /- NYLOCK - TRACTION IDLER ARM 0- TRACTION PULLEY 0-0 SCREW /- X.00 0 9-9 WASHER 0 0-00 NUT /- 0- SCREW /- X. 0 00- WASHER -9 PULLEY ENG IMPELLER 9-90 PULLEY ENG TRACTION 0 0- SCREW /- X.00 0 0 0-00 LOCKWASHER / - BELT GUIDE 0 0-00 LOCKWASHER / - IDLER BUSHING NOTE: All component dimensions given in U.S. inches. inch =. mm 0
WHEELS SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 9 9-99 WHEEL X.0 X LH 9 9-00 WHEEL X.0 X RH 0.0.00-A - STEER CABLE BRACKET LH -9 STEER CABLE BRACKET RH 0..00-A NOTE: All component dimensions given in U.S. inches. inch =. mm
WHEELS SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 0 9 0 9 0 9 0 9 0..00-A 0 - COVER - SHOULDER SCREW 00 00- RETAINER RING 9 - WHEEL DRIVER - RETAINER RING - WHEEL LOBE 9 9- CLUTCH SLIDE 9-9 SPRING 9 9- SQUARE 0 9 9-0 AXLE LOBE -9 THRUST WASHER 9 9-9 STEERING YOKE -9 STEERING BRACKET 9 0-0 SCREW / X.0 9 9- PIVOT BRACKET 9 9- BELLCRANK - BELLCRANK PIN 0 0-0 SCREW / 0 X. 9 0 0- STEERING LINK 0 0 0-9 RETAINER 0-9 RETAINER 9 - SPRING 0- LEVER PIN 9 9- PIVOT BRACKET NOTE: All component dimensions given in U.S. inches. inch =. mm
BAG OF S SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 9 9 - POWER CORD 9- RETAINER PIN 9- WRENCH -0 REMOTE SPRING 9-9 SHOULDER BOLT /-0 9-0 LOCKNUT /-0 0-0 CARRIAGE BOLT /- X / - LOCKNUT /- 9 0 0-00 LOCKNUT /- 0 9 - WASHER / 9 0-90 SHEAR BOLT /-0 X -/ 0 0-00 LOCKNUT /-0 0..00-A 9 0- SAFETY IGNITION. 0..0-A 0- SHIFTER ROD TOP - SHIFTER ROD BOTTOM 0-0 CARRIAGE BOLT /- X. - NUT /- NOTE: All component dimensions given in U.S. inches. inch =. mm
DECALS SNOW THROWER - MODEL SB-LS (9900900), PRODUCT 9 9 00-9 9 0- DECAL, DANGER 0- DECAL, DANGER, DEFLECTOR 0- DECAL, DANGER 0- DECAL, INSTRUCTION -0 DECAL, REMOTE DEFLECTOR 9 - DECAL, SPEED CONTROL -99 DECAL, LH TRIGGER -9 DECAL, RH TRIGGER - - - OPERATOR'S MANUAL, ENGLISH - - -9 OPERATOR'S MANUAL, FRENCH NOTE: All component dimensions given in U.S. inches. inch =. mm