1 Miniature microswitches - Positive break 81607 Coil spring snap-action mechanism with wiping contacts Positive opening action according to IEC 6097-5-1 Annex K atings from 10 ma Vc to 6 A 250 Va Very long life Extended range of terminals cuus approved Choice of actuators: stainless steel or plastic Main specifications Positive break 81607 Standard Dual-current (DOE) Function I (changeover) W2 8160702 8160796 I (changeover) W 816070 8160786 I (changeover) W6A5 8160706 I (changeover) X1 I (changeover) X2 I (changeover) X 8160708 (normally closed) W2 8160701 816079 (normally closed) W 816070 8160797 (normally closed) W6A5 8160705 (normally closed) X2 (normally closed) X 8160707 Electrical characteristics Positive opening action ating nominal / 250 Va (A) 6 6* Thermal current (Ith) A 10 10 Mechanical characteristics Maximum operating force (N) Min. elease force (N) 1.5 Minimum positive opening force (N) 18 Max. Allowable overtravel force (N) 200 est position max. (mm) 15.7 Operating position (mm) 1.8 ±0. Positive opening position (mm) 1.5 Maximum differential travel (mm) 0. Min. overtravel (mm) 1. Ambient operating temperature ( C) -0 +85 Mechanical life (operations) 10 7 Contact gap (mm) 1.2 Weight (g) 7 Additional specifications - Case, Button: PBT GF (UL 9-V0 / GWFI 960 C) - Cover: PC (UL 9-V0 / GWFI 850 C), transparent - Contacts: silver alloy, gold-plated silver alloy (dual-current) - Terminals: brass (except W2/X: copper nickel), silver plated common - Levers: stainless steel or polyamide, polyamide roller - Degree of protection: IP0 (mechanism) - ecommended actuating speed: 0.1 mm/s to 0.5 m/s - ated insulation voltage Ui: 250 V - Impulse withstand voltage Uimp: kv Product adaptations Special levers : special shapes and lengths Special connections : angled, screw with clamp (W5), full wiring with custom connector. Adjustable fixing by metal threaded barrel (SP9627) Variant for irradiated environment
www.crouzet-switches.com 2 Principles Single break snap-action switch with positive opening action on NC contacts (1-2) according to IEC 6097-5-1 Annex K Changeover - SPDT (form C) Normally closed - SPST-NC (form B) Curves Electrical life - esistive load: 250 Va 6 A: 10 5 cycles - Inductive load (IEC 6097-5-1) : AC15: 250 Va 6 A: 0. x 10 5 cycles DC1: 2 Vc 20 W L/ 0 ms: x 10 5 cycles 120 Vc 20W L/ 0 ms: 5 x 10 5 cycles * Dual-current models are designed to operate equally well on low current (10 ma V minimum recommended) or medium-current (6 A maximum) circuits. However, a given product should only be used to switch one type of circuit during its working life Dimensions Product 81607 22,2 2,8 20,2 1 10, 15,8, 10 27,8 B Total travel position 1.2 max. W2 solder W quick-connect 6. x 0.8 W6 quick-connect.8x0.5 9,9 9,8 X1 for PCB, straight output X2 for PCB, rear output X for PCB, front output 2,85 6±0,2 1, 5,1 5 1, 1,5 1,2x 6, 1,2x
Actuator mounting positions 19AX flat 19EX roller 15FX dummy roller 2,5 F 5,7 5,5 2, 0.5x8 Actuator and mounting accessories Flat 19AX 16.2 oller 19EX 15.8 Dummy roller 15FX 2. Operating force - max. N 2. elease force - min. N 1 1 0.9 Min. positive opening force N 18 18 11 Maximum rest position mm 16.2 21. 21.8 Operating position mm 15. ±0, 20.5 ±0,5 20. ±0,6 Positive opening position mm 1 19.2 18 Maximum total travel position mm 1.9 19.1 17.6 We recommend that levers are assembled in our factories Two-pole 19A2X 2** Flexible with roller 15B** Plastic 15V** ** Consult us 81607 microswitches with referenced actuators 81607 Standard Actuator 19AX 16.2 19EX 15.8 15FX 2. I W2 8160789 I W 8160710 I X W2 8160787 W 8160711 816071 X 816071 Installation recommendations See Basic technical concepts How to order Use the 8 digit part numbers when they are defined Other cases, precise: Type of microswitch - Function - Connection - Actuator* - Adaptation* * if needed Example: 81607 DOE W 19AX 16.2
www.crouzet-switches.com Examples of special adaptations Metal plunger and threaded barrel for heavy duty and precise setting (SP9627)
1 0/2016 Miniature microswitches - Positive break 82607 Coil spring snap-action mechanism with wiping contacts Positive opening action according to IEC 6097-5-1 Annex K 6 A 250 Va max rating Operating temperature -0 C to 125 C Very long life Extended range of terminals - Stainless steel actuators cuus and CCC approved Main specifications Positive break 82607 Function I (changeover) W2 8260702 I (changeover) W 826070 I (changeover) W6 8260706 I (changeover) W5 I (changeover) X1 8260765 I (changeover) X2 8260768 I (changeover) X 8260708 (normally closed) W2 8260701 (normally closed) W 826070 (normally closed) W6 8260705 (normally closed) W5 (normally closed) X2 826072 (normally closed) X 8260707 Electrical characteristics Positive opening action ating nominal / 250 Va (A) 6 Thermal current (Ith) A 10 Mechanical characteristics Maximum operating force (N) Min. elease force (N) 1.5 Minimum positive opening force (N) 18 Max. Allowable overtravel force (N) 200 est position max. (mm) 15.7 Operating position (mm) 1.8 ±0. Positive opening position (mm) 1.5 Maximum differential travel (mm) 0. Min. overtravel (mm) 1. Ambient operating temperature ( C) -0 +125 Mechanical life (operations) 10 7 Contact gap (mm) 1.2 Weight (g) 7 Additional specifications - Case: PET GF (UL 9-V0 / GWFI 960 C / GWIT 775 C) - Button: PA66 GF (UL 9-V0 / GWFI 960 C) - Contacts: silver alloy - Terminals: brass (except W2/X: copper nickel), silver plated common - Levers: stainless steel, polyamide roller - Degree of protection: IP0 (mechanism) - ecommended actuating speed: 0.25 mm/s to 0.5 m/s - ated insulation voltage Ui: 250 V - Impulse withstand voltage Uimp: kv Product adaptations Special levers: special shapes and lengths Lever mounted on position A for higher ratio Special connections: angled, full wiring with custom connector.
2 0/2016 Principles Single break snap-action switch with positive opening action on NC contacts (1-2) according to IEC 6097-5-1 Annex K Changeover - SPDT (form C) Normally closed - SPST-NC (form B) Curves Electrical life - esistive load: 250 Va 6 A: 10 5 cycles - Inductive load (IEC 6097-5-1) : AC15: 250 Va 6 A: 0. x 10 5 cycles DC1: 2 Vc 20 W L/ 0 ms: x 10 5 cycles 120 Vc 20W L/ 0 ms: 5 x 10 5 cycles Dimensions Product 82607 22,2 2,8 20,2 1 10,1 10, 15,9, 27,8 B Total travel position 1.2 max. W2 solder W quick-connect 6. x 0.8 W5 screw with clamp 10 5 5 17 10, 6,5 x 10,5 0, Ø1,65 M x 6 1,7 6,, 9 8, W6 quick-connect.8x0.5 X1 for PCB, straight output X2 for PCB, rear output 10,5 6,9 16,85 2,85 8, 0,5 2,2 7,5,75 6±0,2 1, 5,1 5 6, 1, 10, 1,5 1,2,9 Ø1,
0/2016 X for PCB, front output 10,,9 1,5 1,2 Actuator mounting positions Pos A (optional) 1, 6 Pos B (standard) 5,9 5 260A flat 260E roller 0,7 x F Ø,8 x, F 0,7 x Other shapes and dimensions: consult us Actuator and mounting accessories Flat 260A 16.8 oller 260E 16 Operating force - max. N elease force - min. N 1 1 Min. positive opening force N 18 18 Maximum rest position mm 16. 21.5 Operating position mm 15.5 ±0, 20.6 ±0,5 Positive opening position mm 1.2 19. Maximum total travel position mm 1.1 19.2 Levers are assembled in our factories 82607 microswitches with referenced actuators Actuator 260A 16.8 Pos B 206E 16 Pos B 82607 I W2 826075 I W 8260710 I W5 826076 I X 826076 W2 82607 W 8260711 W5 X 826071 Installation recommendations See Basic technical concepts How to order Use the 8 digit part numbers when they are defined Other cases, precise: Type of microswitch - Function - Connection - Actuator* - Fixing position* * if needed Example: 82607 W2 260A 16.8 B